Strange Issue with IIS authentication in Clustered BAM environment

Here's my configuration:
Cluster #1 - prbam01
Node 1 pbm101
Node 2 pbm102
This cluster is running ADC, event service, enterprise link, and IIS (IIS up on both nodes)
Cluster #2 - prbam02
Node 1 pbm103
This cluster is running report cache and IIS. End users will hit this IIS for reports, admin, etc.
Problem:
The IIS on cluster 1, node 1 (pbm101) will never authenticate when trying to access the BAM web pages with any URL (http://prbam01/oraclebam or http://pbm101/oraclebam). It exhibits this behaviour whether it is the active cluster node or not. Cluster 1, node 2 exhibits correct behaviour in that it works at URL http://pbm102/oraclebam at all times and at http://prbam01/oraclebam when it is the active node.
I have check IIS security settings and they appear exactly the same on both boxes. ADC and everything else seems to be running ok when node 1 is the active node, just the BAM web pages do not authenticate.

This seems to be an IIS specific problem on pbm101 alone.
Did you check the directory security settings for the OracleBAM application on pbmbam101 ? Any of the authenticated access methods should be enabled, or users cannot access certain pages from the local network, since IIS would be using anonymous authenication. That would normally not be a problem, but for IE sending in credentials that will be different from the account on the IIS server used for anonymous access. I suggest copying the directory security settings from the other node in the cluster (for all directories!!).
Another additional point is that IIS ultimately uses file and directory permissions to resolve access rights. So you can check the permissions on the public folders used by IIS and ASP.Net.

Similar Messages

  • Strange issue with key authentication

    I just installed Arch again after being away for a few years. Almost everything is running smoothly, but I ran into a weird problem with openssh. Namely, I can successfully log in with a  key only if in /etc/ssh/sshd_config instead of the default
    AuthorizedKeysFile .ssh/authorized_keys
    I put
    AuthorizedKeysFile /home/testuser/.ssh/authorized_keys
    Of course I'd like to be able to use key authentication for more than just one user. Any ideas what I should change to make this possible?
    The rest of the config file is:
    # $OpenBSD: sshd_config,v 1.81 2009/10/08 14:03:41 markus Exp $
    # This is the sshd server system-wide configuration file. See
    # sshd_config(5) for more information.
    # This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
    # The strategy used for options in the default sshd_config shipped with
    # OpenSSH is to specify options with their default value where
    # possible, but leave them commented. Uncommented options change a
    # default value.
    #Port 22
    #AddressFamily any
    ListenAddress 0.0.0.0
    #ListenAddress ::
    # The default requires explicit activation of protocol 1
    #Protocol 2
    # HostKey for protocol version 1
    #HostKey /etc/ssh/ssh_host_key
    # HostKeys for protocol version 2
    #HostKey /etc/ssh/ssh_host_rsa_key
    #HostKey /etc/ssh/ssh_host_dsa_key
    # Lifetime and size of ephemeral version 1 server key
    #KeyRegenerationInterval 1h
    #ServerKeyBits 1024
    # Logging
    # obsoletes QuietMode and FascistLogging
    #SyslogFacility AUTH
    #LogLevel INFO
    # Authentication:
    #LoginGraceTime 2m
    #PermitRootLogin yes
    #StrictModes yes
    MaxAuthTries 6
    #MaxSessions 10
    RSAAuthentication yes
    PubkeyAuthentication yes
    AuthorizedKeysFile /home/ardo/.ssh/authorized_keys
    # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
    #RhostsRSAAuthentication no
    # similar for protocol version 2
    #HostbasedAuthentication no
    # Change to yes if you don't trust ~/.ssh/known_hosts for
    # RhostsRSAAuthentication and HostbasedAuthentication
    #IgnoreUserKnownHosts no
    # Don't read the user's ~/.rhosts and ~/.shosts files
    #IgnoreRhosts yes
    # To disable tunneled clear text passwords, change to no here!
    PasswordAuthentication yes
    #PermitEmptyPasswords no
    # Change to no to disable s/key passwords
    ChallengeResponseAuthentication no
    # Kerberos options
    #KerberosAuthentication no
    #KerberosOrLocalPasswd yes
    #KerberosTicketCleanup yes
    #KerberosGetAFSToken no
    # GSSAPI options
    #GSSAPIAuthentication no
    #GSSAPICleanupCredentials yes
    # Set this to 'yes' to enable PAM authentication, account processing,
    # and session processing. If this is enabled, PAM authentication will
    # be allowed through the ChallengeResponseAuthentication and
    # PasswordAuthentication. Depending on your PAM configuration,
    # PAM authentication via ChallengeResponseAuthentication may bypass
    # the setting of "PermitRootLogin without-password".
    # If you just want the PAM account and session checks to run without
    # PAM authentication, then enable this but set PasswordAuthentication
    # and ChallengeResponseAuthentication to 'no'.
    UsePAM yes
    #AllowAgentForwarding yes
    #AllowTcpForwarding yes
    #GatewayPorts no
    X11Forwarding yes
    #X11DisplayOffset 10
    #X11UseLocalhost yes
    #PrintMotd yes
    #PrintLastLog yes
    #TCPKeepAlive yes
    #UseLogin no
    #UsePrivilegeSeparation yes
    #PermitUserEnvironment no
    #Compression delayed
    #ClientAliveInterval 0
    #ClientAliveCountMax 3
    #UseDNS yes
    #PidFile /var/run/sshd.pid
    #MaxStartups 10
    #PermitTunnel no
    #ChrootDirectory none
    # no default banner path
    #Banner none
    # override default of no subsystems
    Subsystem sftp /usr/lib/ssh/sftp-server
    # Example of overriding settings on a per-user basis
    Match User anoncvs
    #X11Forwarding no
    #AllowTcpForwarding no
    #ForceCommand cvs server

    The default values in sshd_config aren't correct for the location of the authorized key file. See This Bug Post
    Therefore, to resolve this, do one of these
    1) Comment the line "#AuthorizedKeysFile    .ssh/authorized_keys"
    2) Change the line to "AuthorizedKeysFile %h/.ssh/authorized_keys"
    My Original Post:
    I cannot offer any helpful advice for resolution, but I can contribute that I am also having this issue. The default value for the authorized_keys location, as well as "~/.ssh/authorized_keys" does not work, however "/home/<username>/ssh/authorized_keys" does...
    Actually, After a bit of tinkering, I rectified my sshd_config with a .pacnew and it seems to be working, at least with my macbook. Here is my sshd_config:
    # $OpenBSD: sshd_config,v 1.81 2009/10/08 14:03:41 markus Exp $
    # This is the sshd server system-wide configuration file. See
    # sshd_config(5) for more information.
    # This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
    # The strategy used for options in the default sshd_config shipped with
    # OpenSSH is to specify options with their default value where
    # possible, but leave them commented. Uncommented options change a
    # default value.
    Port 40000
    Port 22
    #AddressFamily any
    ListenAddress 192.168.1.103
    #ListenAddress ::
    # The default requires explicit activation of protocol 1
    #Protocol 2
    # HostKey for protocol version 1
    #HostKey /etc/ssh/ssh_host_key
    # HostKeys for protocol version 2
    #HostKey /etc/ssh/ssh_host_rsa_key
    #HostKey /etc/ssh/ssh_host_dsa_key
    # Lifetime and size of ephemeral version 1 server key
    #KeyRegenerationInterval 1h
    #ServerKeyBits 1024
    # Logging
    # obsoletes QuietMode and FascistLogging
    #SyslogFacility AUTH
    #LogLevel INFO
    # Authentication:
    LoginGraceTime 2m
    PermitRootLogin no
    #StrictModes yes
    #MaxAuthTries 6
    #MaxSessions 10
    #RSAAuthentication yes
    #PubkeyAuthentication yes
    #AuthorizedKeysFile .ssh/authorized_keys
    # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
    #RhostsRSAAuthentication no
    # similar for protocol version 2
    #HostbasedAuthentication no
    # Change to yes if you don't trust ~/.ssh/known_hosts for
    # RhostsRSAAuthentication and HostbasedAuthentication
    #IgnoreUserKnownHosts no
    # Don't read the user's ~/.rhosts and ~/.shosts files
    #IgnoreRhosts yes
    # To disable tunneled clear text passwords, change to no here!
    #PasswordAuthentication yes
    #PermitEmptyPasswords no
    # Change to no to disable s/key passwords
    ChallengeResponseAuthentication no
    # Kerberos options
    #KerberosAuthentication no
    #KerberosOrLocalPasswd yes
    #KerberosTicketCleanup yes
    #KerberosGetAFSToken no
    # GSSAPI options
    #GSSAPIAuthentication no
    #GSSAPICleanupCredentials yes
    # Set this to 'yes' to enable PAM authentication, account processing,
    # and session processing. If this is enabled, PAM authentication will
    # be allowed through the ChallengeResponseAuthentication and
    # PasswordAuthentication. Depending on your PAM configuration,
    # PAM authentication via ChallengeResponseAuthentication may bypass
    # the setting of "PermitRootLogin without-password".
    # If you just want the PAM account and session checks to run without
    # PAM authentication, then enable this but set PasswordAuthentication
    # and ChallengeResponseAuthentication to 'no'.
    UsePAM yes
    AllowAgentForwarding yes
    AllowTcpForwarding yes
    #GatewayPorts no
    X11Forwarding yes
    X11DisplayOffset 10
    X11UseLocalhost yes
    PrintMotd yes
    #PrintLastLog yes
    #TCPKeepAlive yes
    #UseLogin no
    #UsePrivilegeSeparation yes
    #PermitUserEnvironment no
    #Compression delayed
    #ClientAliveInterval 0
    #ClientAliveCountMax 3
    #UseDNS yes
    #PidFile /var/run/sshd.pid
    #MaxStartups 10
    #PermitTunnel no
    #ChrootDirectory none
    # no default banner path
    #Banner none
    # override default of no subsystems
    Subsystem sftp /usr/lib/ssh/sftp-server
    # Example of overriding settings on a per-user basis
    #Match User anoncvs
    # X11Forwarding no
    # AllowTcpForwarding no
    # ForceCommand cvs server
    Last edited by losl (2010-04-12 15:31:46)

  • Slowness Issues with Windows Authentication in SharePoint Foundation 2010 sites

    All, 
    We are having a strange issue with SharePoint Foundation 2010 sites where sites are very slowly loading when accessed via windows based authentication where as the extended sites in  forms authentication are loading normally.
    There were no error logs or even SharePoint logs also except the images load time is showing with different load times.
    Attached are the patches that were updated to the server that may be issue but not sure. Can some one please share your thoughts.
    SQL connectivity b/w the server is good.there are no n/w issues except that the users are using the sites with a different domain other than the domain in which the servers were hosted.
    There is a trust b/w the two domains.This was never changed and there were no issues in the last 2 years.
    Thanks keshav,Share point Developer

    we do have trusted domains
    Inder : It would be better if you run that command again now.
    Inder: How many AD server do you have
    Inder: Do you notice the login request go to nearest AD server. 
    and https sites. Please share your thoughts.
    Inder: All the certificate have intermedite certificates. You need to logon to each SP server, and install
    these certificates on trusted root authority 
    If this helped you resolve your issue, please mark it Answered

  • Strange issue with VPN

    Hello,  I have a strange issue with a VPN we have on our ASA 5520.  We have 2 subnets my side of the VPN that can get to 27 subnets on the other side of the VPN.  However the last remote subnet which I will call 28 I find only 1 of my 2 subnets can get too.  When I reset the tunnel I find that my subnet cannot bring the IPSec tunnel up but the othe side of the tunnel can.  When I view my VPN tunnel Rx always has a value but Tx is always zero, which suggests the traffic isnt even getting there, but this subnet is all the same rules as the other subnets that work.  Any debug commands or tracing you can suggest? I've had others look at the issue and the cant see an issue.  Thanks

    Looks like you have a OD server setup for user authentication so you need to run this
    vpnaddkeyagentuser /LDAPv3/127.0.0.1
    that will add the correct record to OD and it will authenticate.
    Peter

  • Strange issue with WEBI schedule Report

    Hi All,
    I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
    Any idea???
    regards

    Hi Manoj,
    1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very    large data.
    2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
    Hope this will help,
    Anamika.

  • Strange issue with RAM upgrade: It works but it doesn't! Please help.

    Hello Everyone,
    I have a very strange issue with my iMac since upgrading my RAM from 4 to 12 gig. When I first installed the new RAM it booted up and ran great. The next time I went to boot the iMac up it swtiched on but didn't get as far as the first white boot up screen. I tried turning it off and on a few times using the power on/off button but still no success. I decided to remove the RAM and reseat it. The computer then booted up again fine. Here's the problem though: when I went to switch my iMac on the next day it wouldn't boot up. Again, I took the RAM out and put it back in and the iMac booted up fine. I've checked the status of the RAM in the system profiler and it reports that everything is OK. So, I'm at a loss. Obviously, I don't want to go through this process every time I want to start up my Mac. Any ideas/solutions would be very gratefully received.
    Many thanks in advance.

    I completely agree with you. It will be one of the 3 issues you outline. The machine was bought brand new and has never given me a problem. It is just the introduction of the new RAM that has started a problem. However, I did just risk a restart and it booted up fine. I don't know if a restart is any different to shutting down and then pressing the on/off button to start the computer. Maybe my last reseating has done the trick or maybe my thinking is flawed because restarting involves a different process to booting up by pressing the on/off button. I don't know.
    In the part of the world I'm sitting in it's night time now so I will leave the diagnostics running and check the results in the morning. I hope the issue is now resolved anyway. This sort of thing takes me back to my dark PC days although in this case I know it's probably not the Mac's fault.
    Thanks again. Very much appreciated.

  • Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

    Hello everyone.
    Faced very strange issue with account, which is used to run SSIS package.
    The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
    The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
    So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
    Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
    Any ideas, please? 
    MCP

    Here's the real log output:
    Date 16.04.2014 12:47:09
    Log Job History (RU-BW: Update)
    Step ID 1
    Server Server
    Job Name RU-BW: Update
    Step Name bw_import_cust_master_data
    Duration 00:00:02
    Sql Severity 0
    Sql Message ID 0
    Operator Emailed
    Operator Net sent
    Operator Paged
    Retries Attempted 0
    Message
    Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility  Version 10.50.4286.0 for 64-bit  Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started:  12:47:09  Error: 2014-04-16 12:47:11.45
        Code: 0xC0202070     Source: bw_import_cust_master_data Connection manager "Input"     Description: The file name property is not valid. The file name is a device or contains invalid characters.  End Error  Error:
    2014-04-16 12:47:11.47     Code: 0xC0202070     Source: bw_import_cust_master_data Connection manager "Input"     Description: The file name property is not valid. The file name is a device or contains invalid characters.  End
    Error  Error: 2014-04-16 12:47:11.48     Code: 0xC0202070     Source: bw_import_cust_master_data Connection manager "Input"     Description: The file name property is not valid. The file name is a device or contains invalid
    characters.  End Error  Error: 2014-04-16 12:47:11.48     Code: 0xC020207E     Source: Import file Flat File Source [1]     Description: The file name is not valid. The file name is a device or contains invalid characters.
     End Error  Error: 2014-04-16 12:47:11.48     Code: 0xC004701A     Source: Import file SSIS.Pipeline     Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
     End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  12:47:09  Finished: 12:47:11  Elapsed:  2.324 seconds.  The package execution failed.  The step failed.
    MCP

  • Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

    Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
    I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
    To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
    What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
    Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source.  What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
    Some other information:
    - Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
    - If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
    - The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
    Any information would be great – am I missing something here, or is this genuinely weird?

    Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
    Here's what I did to test:
    Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured.  I transferred onto their machines, hooked up my Sony D8, and attempted to play the video.  It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop).  I even tried changing each machine's firewire driver to the legacy one and same results.  I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
    I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver.  Very annoying.  I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
    I have 2 other things I can try:
    1.  Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
    2.  Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/).  I can't do it with my Home edition apparantly.
    Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
    Tim

  • I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing.  Now album covers are interspersed with my pictures.  I have been using apple tv for a while and never had this happen before

    I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing.  Now album covers are interspersed with my pictures.  I have been using apple tv for a while and never had this happen before

    Are you watching this content though iCloud or though from iTunes on your local computer?  If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens?  This is geerally a much more reliable way to view the content.  Easer to fast forward and rewind too.
    - I have a stable internet connection
    Clearlly you don't
    >(Ive tested on other devices)
    Which does not tell you anything about the specific connnection from ATV to iCloud.
    >I am able to stream Netflix problem free from my AppleTV without so much as a hicup
    Again which does not tell you anything about the specific connnection from ATV to iCloud.
    >- I am able to download the episodes to my phone, ipad, and computer without any issues
    Again which does not tell you anything about the specific connnection from ATV to iCloud.  It does remove your ISP throattly traffice as a possible cause though.  So that is good.
    Have you checked your wireless rounter?  Tried doing the factory restor on it?  Upgrading it's firmware?  Is it and or ATV getting extreamly hot when this problme happens?

  • Strange issue with external monitor, only working when external speakers plugged in

    Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
    I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap non-apple adaptor).
    To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
    What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
    Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source.  What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
    Some other information:
    - Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
    - If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
    - The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
    Any information would be great – am I missing something here, or is this genuinely weird?

    Hello cgoldberg11
    Please go to the below link to test if you are having a speaker hardware failure.
    Testing for Hardware Failures (Windows 7)
    This will rule out hardware failure, let me know how that goes.
    Thanks
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP. .....
    Reguards,
    Mo

  • Strange issue with Spry Accordion Panels

    Hi, I'm having some strange issues with the Spry Accordion
    Panels.
    Here is the page:
    http://www.bellaclientcenter.com/browncollege/aboutus.html
    For some reason when I preview this message it adds extra
    characters to the url above, so just delete those off to see the
    correct url.
    The only browser this does NOT happen in is safari, I'm
    seeing it all of my other browsers. You'll notice when you first
    load up the page, you'll see that the active panel header
    background is green, and the non active is a dark grey. But when
    you click one of the other panels they all turn a strange neon blue
    color. This is very apparent in firefox.
    Any thoughts on this? I've attached the spry css code in case
    the problem is there.
    thanks so much!!
    Jeff

    That is because your page is currently invalid. And renders in IE quirksmode..
    <base href="http://www.industrialwebsearch.com/">
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
    So make sure your page is valid, and the animations will go smooth in ie

  • Strange issue with speaker - stays on after a call has ended

    Hi all,
    I have the latest iOS version (7.1) on my iPhone 5.
    I haven't had any hardware issues before, but 2 days ago something strange has began happening.
    Strange issue with speaker - it stays on after a call has ended and plays the sounds that it gets from the microphone.
    Only way to stop it is to make another call and hang up.
    Any ideas?

    oops...we're in the same boat....look m8 that ios 7.1 is rubish i recently after updating mine the ear stop working i called apple customer care we went throu wiv that adviser we restore the phone up 2...3 times nofin happen then da guy told me finally it was not a software problem....but hardware problem and they booked me up 2 take it 2 the near apple store because it is only from apple u can get da matter fixed however if your phone where unlocked outside your network provider or again from the coner street tech....? 4get cos once those form street unlock your phone you just have the same cover or boby let say it ....but your IMEI and all manufacture detail will changed........the good news is if your phone still have manufacture waranty iz free from apple if your waranty run out? apple will ask you 2 pay up 290£.....
    hope this replay may hel you m8
    stay bless

  • Strange issue with Exchange system

    Hello,
    I'm experiencing a strange issue with one of the Exchange 2013 mailbox servers running on Windows 2012. When trying to upgrade it to the new CU5, I'm getting the following errors:
    Error:
    The local domain needs to be prepared using Setup /PrepareDomain before server roles can be installed.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DomainPrepRequired.aspx
    Error:
    The Mailbox server role isn't installed on this computer.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UnifiedMessagingRoleNotInstalled.aspx
    Error:
    The Mailbox server role isn't installed on this computer.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.BridgeheadRoleNotInstalled.aspx
    Error:
    An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support Windows Server 2008 R2 SP1 or later and Windows Server 2012.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
    In the Exchange organization there are 2 CAS servers, 2 MBX servers.
    Memento Mori

    Hi Vick,
    Based on my research, I suggest you should upgrade the AD first.
    1. Exchange 2013 CU5 contains schema changes. To upgrade the Schema to CU5 you can execute the following command:
    Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
    2. And you also should upgrade the
    Configuration Partition and the Domain Partition with the following command:
    Setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
    Setup.exe /PrepareDomain /IAcceptExchangeServerLicenseTerms
    3. After finished above two steps, now you can start to upgrade an Exchange 2013 server to CU5. Open a command prompt and enter the following command:
    Setup.exe /Mode:Upgrade /IAcceptExchangeServerLicenseTerms

  • Strange issue with the render percentage indicator

    Hello,
    I'm getting a strange issue with the FCPX interface - the little gauge that shows the percentage complete a render is - seems to have gone crazy! and is spinning round. I've tried changing project/ restarting fcpx and also restarting the mac!
    heres a screen capture of it in action... https://www.dropbox.com/s/o9bwexyuntx0jxd/what.mov

    This is traced back to a backup issue.. Hopefully a fix will come with 10.1.4
    At this time, the solution is to turn off backup per library...
    10.1.3 update "backup" mess

  • Strange issue with an n86

    I'm encountering a very strange issue with an n86 lately.
    Sometimes when I boot it up it goes through the boot process fine (nokia logo, hands + tune).
    But ends up at a white screen.
    Strangly I can shutdown the phone normally, and even access the menu.
    It's like the only thing that doesn't load right is the standby screen.
    The only thing I installed lately is PhoneTorch.
    Restarting the phone a few times, makes it work right eventually.
    Firmware: V21 (thats the latest available for me)

    Could u uninstall the torch app to check if it is the cause of the issue? Lets try the easy one first! If a problem occure right after youve installed something on your device, or changed a setting, it's often wise to try to uninstall or undo what u have done to it. If this fails we have to look at other possible solutions.

Maybe you are looking for