Strange issue with new Cisco Catalyst 2960 (IOS)

Hello all,
I am upgrading a older 2950(100M) switch replacing it with a gigabit 2960. Installed it in the same rack, the configuration is practically non-existent just set the passwords and IP. We run a single VLAN flat network for this so I started out by patching it to the existing switch, after a few days we had an opportunity to migrate because there was some downtime so I disconnected the cables on the old and moved them to the new.. Everything seemed fine, there is connectivity and things operate, but a few days later we noticed that some network transfer activities are slow. There are no errors or log entries showing on the new switch or the old one, but the low throughput is persistent.
All ports show 1G Full duplex as they should, but what I see when I test is that traffic tests look almost asynchronous when passing switch boundaries with normal read speeds and slow writes. Reversing the direction of the test hosts I get slow reads and fast writes so it seems to 'stick' to one side of the traffic path. Testing the same equipment against differente targets without the switch boundary crossing does not show the problem. All Intra-switch tests look good (gig switches transfer near a gig and 100 switches near 100), but the moment there is a crossing things behave strangely regardless of the target (new switch is center backbone with most hosts, but does no routing). Network layout is essentially a T with everything radiating from the new switch. I can eliminate the old switch soon, but I still need to resolve the problem with the crossing to the other switch.
Everything seems to point at the inter switch links. One is a patch cable under two feet, and the other is a dedicated fiber site link. We had the vendor confirm that the site link showed no issues, but having the same symptoms on both links makes me suspect the switch has something odd happening..
I checked for duplex issues first, but didn't find any. I flushed the arp caches in all of the switches (3 total) and all of the computers as well, but the problem persists.
Could this be an STP issue ? If so how can I set this switch as the STP root and force a refresh..
Any help would be greatly appreciated.

Hi Paul,
That was my concern and why I worried about making a change from remote, things are not as they should be.
Here is the output for each switch..
======================================================================
First the old switch (originally old switch connected to remote directly port 24 fixed speed/duplex and no other config)
C2950Calidad#show spanning-tree vlan 1
VLAN0001
Spanning tree enabled protocol ieee
Root ID    Priority    32769
             Address     0013.7f23.0000
             This bridge is the root
             Hello Time   2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority    32769 (priority 32768 sys-id-ext 1)
             Address     0013.7f23.0000
             Hello Time   2 sec Max Age 20 sec Forward Delay 15 sec
             Aging Time 300
Interface        Role Sts Cost      Prio.Nbr Type
Fa0/2            Desg FWD 19        128.2    P2p
Fa0/16           Desg FWD 19        128.16   P2p
Fa0/21           Desg FWD 19        128.21   P2p
Fa0/22           Desg FWD 19        128.22   P2p
C2950Calidad#sh run int Fa0/22
Building configuration...
Current configuration : 34 bytes
interface FastEthernet0/22
end
C2950Calidad#sh int Fa0/22
FastEthernet0/22 is up, line protocol is up (connected)
Hardware is Fast Ethernet, address is 0013.7f23.0016 (bia 0013.7f23.0016)
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
     reliability 255/255, txload 11/255, rxload 3/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, media type is 100BaseTX
input flow-control is unsupported output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:20, output 00:00:01, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 1229000 bits/sec, 716 packets/sec
5 minute output rate 4361000 bits/sec, 800 packets/sec
     1543435357 packets input, 1281752172 bytes, 0 no buffer
     Received 3977688 broadcasts (0 multicast)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 4346 ignored
     0 watchdog, 2032103 multicast, 0 pause input
     0 input packets with dribble condition detected
     2298226914 packets output, 1725074683 bytes, 0 underruns
     0 output errors, 0 collisions, 2 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out
C2950Calidad#sh int Fa0/22 switchport
Name: Fa0/22
Switchport: Enabled
Administrative Mode: dynamic desirable
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: On
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk private VLANs: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL
Protected: false
Appliance trust: none
============================================================================
Now the new switch (at center between other two, patched to above, fiber dedicated provider link to remote)
This includes two port command sets because it's in the middle interconnecting the other switches.
CISCO-2960-48-GB-ASP#show spanning-tree vlan 1
VLAN0001
Spanning tree enabled protocol ieee
Root ID    Priority    32769
             Address     0013.7f23.0000
             Cost        19
             Port        48 (GigabitEthernet1/0/48)
             Hello Time   2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority    32769 (priority 32768 sys-id-ext 1)
             Address     f41f.c2dc.9b80
             Hello Time   2 sec Max Age 20 sec Forward Delay 15 sec
             Aging Time 300 sec
Interface           Role Sts Cost      Prio.Nbr Type
Gi1/0/2             Desg FWD 19        128.2    P2p
Gi1/0/3             Desg FWD 4         128.3    P2p
Gi1/0/4             Desg FWD 4         128.4    P2p
Gi1/0/5             Desg FWD 4         128.5    P2p
Gi1/0/6             Desg FWD 4         128.6    P2p
Gi1/0/7             Desg FWD 4         128.7    P2p
Gi1/0/10            Desg FWD 4         128.10   P2p
Gi1/0/11            Desg FWD 4         128.11   P2p
Gi1/0/12            Desg FWD 4         128.12   P2p
Gi1/0/13            Desg FWD 4         128.13   P2p
Gi1/0/14            Desg FWD 4         128.14   P2p
Gi1/0/15            Desg FWD 4         128.15   P2p
Gi1/0/16            Desg FWD 19        128.16   P2p
Gi1/0/17            Desg FWD 4         128.17   P2p
Gi1/0/18            Desg FWD 4         128.18   P2p
Gi1/0/20            Desg FWD 4         128.20   P2p
Gi1/0/21            Desg FWD 19        128.21   P2p
Gi1/0/22            Desg FWD 4         128.22   P2p
Gi1/0/24            Desg FWD 4         128.24   P2p
Gi1/0/25            Desg FWD 4         128.25   P2p
Gi1/0/27            Desg FWD 19        128.27   P2p
Gi1/0/29            Desg FWD 19        128.29   P2p
Gi1/0/32            Desg FWD 19        128.32   P2p
Gi1/0/37            Desg FWD 4         128.37   P2p
Gi1/0/38            Desg FWD 19        128.38   P2p
Gi1/0/39            Desg FWD 19        128.39   P2p
Gi1/0/40            Desg FWD 19        128.40   P2p
Gi1/0/41            Desg FWD 19        128.41   P2p
Gi1/0/42            Desg FWD 4         128.42   P2p
Gi1/0/43            Desg FWD 19        128.43   P2p
Gi1/0/44            Desg FWD 19        128.44   P2p
Gi1/0/45            Desg FWD 19        128.45   P2p
Gi1/0/47            Desg FWD 19        128.47   P2p
Gi1/0/48            Root FWD 19        128.48   P2p
CISCO-2960-48-GB-ASP#show run int Gi1/0/48
Building configuration...
Current configuration : 39 bytes
interface GigabitEthernet1/0/48
end
CISCO-2960-48-GB-ASP#show int Gi1/0/48
GigabitEthernet1/0/48 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is f41f.c2dc.9bb0 (bia f41f.c2dc.9bb0)
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
     reliability 255/255, txload 2/255, rxload 10/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, media type is 10/100/1000BaseTX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:01, output 00:00:02, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 12712290
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 4305000 bits/sec, 801 packets/sec
5 minute output rate 1149000 bits/sec, 706 packets/sec
     2196985674 packets input, 2514470162077 bytes, 0 no buffer
     Received 28075666 broadcasts (15513358 multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 15513358 multicast, 0 pause input
     0 input packets with dribble condition detected
     1534630723 packets output, 395369715690 bytes, 0 underruns
     0 output errors, 0 collisions, 1 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out
CISCO-2960-48-GB-ASP#show int Gi1/0/48 switchport
Name: Gi1/0/48
Switchport: Enabled
Administrative Mode: dynamic auto
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: On
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Administrative Native VLAN tagging: enabled
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk Native VLAN tagging: enabled
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk associations: none
Administrative private-vlan trunk mappings: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL
Protected: false
Unknown unicast blocked: disabled
Unknown multicast blocked: disabled
Appliance trust: none
CISCO-2960-48-GB-ASP#show run int Gi1/0/47
Building configuration...
Current configuration : 63 bytes
interface GigabitEthernet1/0/47
speed 100
duplex full
end
CISCO-2960-48-GB-ASP#show int Gi1/0/47
GigabitEthernet1/0/47 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is f41f.c2dc.9baf (bia f41f.c2dc.9baf)
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
     reliability 255/255, txload 1/255, rxload 2/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, media type is 10/100/1000BaseTX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:28, output 00:00:01, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 576929
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 922000 bits/sec, 233 packets/sec
5 minute output rate 453000 bits/sec, 220 packets/sec
     57257892 packets input, 17029314836 bytes, 0 no buffer
     Received 81580 broadcasts (29497 multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 29497 multicast, 0 pause input
     0 input packets with dribble condition detected
     101568868 packets output, 77491607955 bytes, 0 underruns
     0 output errors, 0 collisions, 1 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out
CISCO-2960-48-GB-ASP#show int Gi1/0/47 switchport
Name: Gi1/0/47
Switchport: Enabled
Administrative Mode: dynamic auto
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: On
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Administrative Native VLAN tagging: enabled
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk Native VLAN tagging: enabled
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk associations: none
Administrative private-vlan trunk mappings: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL
Protected: false
Unknown unicast blocked: disabled
Unknown multicast blocked: disabled
Appliance trust: none
===========================================================================
Finally the third switch (at separate site via provider dedicated fiber link from port 47 above)
SWC2960#show spanning-tree vlan 1
VLAN0001
Spanning tree enabled protocol ieee
Root ID    Priority    32769
             Address     1833.9db5.cd80
             This bridge is the root
             Hello Time   2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority    32769 (priority 32768 sys-id-ext 1)
             Address     1833.9db5.cd80
             Hello Time   2 sec Max Age 20 sec Forward Delay 15 sec
             Aging Time 300 sec
Interface           Role Sts Cost      Prio.Nbr Type
Fa0/1               Desg FWD 19        128.1    P2p
Fa0/2               Desg FWD 19        128.2    P2p
Fa0/3               Desg FWD 19        128.3    P2p
Fa0/4               Desg FWD 19        128.4    P2p
Fa0/5               Desg FWD 19        128.5    P2p
Fa0/6               Desg FWD 19        128.6    P2p
Fa0/7               Desg FWD 19        128.7    P2p
Fa0/8               Desg FWD 19        128.8    P2p
Fa0/9               Desg FWD 19        128.9    P2p
Fa0/12              Desg FWD 19        128.12   P2p
Fa0/13              Desg FWD 19        128.13   P2p
Fa0/14              Desg FWD 19        128.14   P2p
Fa0/16              Desg FWD 19        128.16   P2p
Fa0/17              Desg FWD 19        128.17   P2p
Fa0/18              Desg FWD 19        128.18   P2p
Gi0/2               Desg FWD 4         128.26   P2p
SWC2960#sh run int Gi0/2
Building configuration...
Current configuration : 36 bytes
interface GigabitEthernet0/2
end
SWC2960#sh int Gi0/2
GigabitEthernet0/2 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is 1833.9db5.cd9a (bia 1833.9db5.cd9a)
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, 1000Mb/s, link type is auto, media type is 10/100/1000BaseTX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:01, output 00:00:01, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/0 (size/max)
5 minute input rate 450000 bits/sec, 205 packets/sec
5 minute output rate 792000 bits/sec, 211 packets/sec
     76476638 packets input, 76487607492 bytes, 0 no buffer
     Received 528325 broadcasts (253243 multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 253243 multicast, 0 pause input
     0 input packets with dribble condition detected
     59807938 packets output, 18071502348 bytes, 0 underruns
     0 output errors, 0 collisions, 1 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out
SWC2960#sh int Gi0/2 switchport
Name: Gi0/2
Switchport: Enabled
Administrative Mode: dynamic auto
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: On
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Administrative Native VLAN tagging: enabled
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk Native VLAN tagging: enabled
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk associations: none
Administrative private-vlan trunk mappings: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL
Protected: false
Unknown unicast blocked: disabled
Unknown multicast blocked: disabled
Appliance trust: none
There really isn't anything odd configured, but since CDP doesn't cross the fiber link I think it must be a q-q tunnel..
Dave

Similar Messages

Cisco catalyst 2960 booting garbage, help on restore IOS

Dear All,
This is my first time on terminal access of Cisco Catalyst 2960 (2960TC-L), normally would use the web configuration for most task.
Now the switch has an issue with the web interface and when I try to access through terminal, I was greeted with garbage upon the booting of the switch, I searched for the terminal boot process and it wasn't what I was expected for my switch. I was a bit dumbfound now of how can I recover the firmware to its default stage, now that I cannot even boot through its terminal console.
Any help is highly appreciated. Thank you for your time.

Hi,
I just verified with my colleague of whom have done quite a few bits before I took over his task.
His reply was he actually did an IOS flash before, though I'm not sure how he did it, but according to him, it was actually a success and the web interface still works for few times before it become like this.
As I tried another time to goes into root mode (or Admin mode??) for the switch, the steps as I performed below:
1. Refer to cisco-2960-putting-setting.jpg for the settings. I press Open and it does display the console Window, no issue there.
2. I hold the "mode" button on the switch and turn on the switch power, and after few seconds the screen display as such (refer to cisco-2960-putty-output2.jpg), the SYST L.E.D. did flash with following pattern: Green (blink ~15 times) then Orange-Green (repeat blink twice) then Green (stable light), for this I was expecting it to goes off after few seconds but it didn't, I wait about a minute before I let go the "mode" button.
3. After I let go the "mode" button, it goes to the screen (refer cisco-2960-putty-output3.jpg), and the SYST still blinking, possibly infinitely... with the console output screen stays like that... and whatever I entered display weird/garbage characters instead, I can't do anything on it.
Each tries display different weird characters, as the SYST still blinking infinitely.
I'm unsure if I'm giving enough details for online troubleshooting, I'll try my best to give as per instructed.
Thank you for your time.

Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best

Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best
My wife have iPhone 4 and ipad new is not updated it working good and my devices after update working bad :-(, likely the devices of my wife stay with 5.1.1

good thing i havent updated mine yet..

Cisco Catalyst 2960-X and Cisco Prime compatibility

Hello All,
I had review all the compatibility matrix of versions of Cisco Prime 1.2, 1.4 and 2.0, and just can't find the Cisco Catalyst 2960-X series as a listed device, which really surprises me.
Can you clear that out??
Thanks,

The 2960X (and XR) support was added with Device Pack 2 for PI 2.0. It was released on 22 January 2014 and is available here.
(PI 2.1 won't be out until later this year, release date not yet announced.)
Following are the 2960X/XR types added:
Cisco Catalyst 2960-X Series Switches
Device Type
SYSOIDS
S/W Version
Software
Cisco Catalyst 2960X-24TS-L Switch
OID:1.3.6.1.4.1.9.1.1699
>=12.1
IOS
Cisco Catalyst 2960X-48FPD-L Switch
OID:1.3.6.1.4.1.9.1.1690
>=12.1
IOS
Cisco Catalyst 2960X-48LPD-L Switch
OID:1.3.6.1.4.1.9.1.1691
>=12.1
IOS
Cisco Catalyst 2960X-48TD-L Switch
OID:1.3.6.1.4.1.9.1.1692
>=12.1
IOS
Cisco Catalyst 2960X-24PD-L Switch
OID:1.3.6.1.4.1.9.1.1693
>=12.1
IOS
Cisco Catalyst 2960X-24TD-L Switch
OID:1.3.6.1.4.1.9.1.1694
>=12.1
IOS
Cisco Catalyst 2960X-48FPS-L Switch
OID:1.3.6.1.4.1.9.1.1695
>=12.1
IOS
Cisco Catalyst 2960X-48LPS-L Switch
OID:1.3.6.1.4.1.9.1.1696
>=12.1
IOS
Cisco Catalyst 2960X-24PS-L Switch
OID:1.3.6.1.4.1.9.1.1697
>=12.1
IOS
Cisco Catalyst 2960X-48TS-L Switch
OID:1.3.6.1.4.1.9.1.1698
>=12.1
IOS
Cisco Catalyst 2960X-24PSK-L Switch
OID:1.3.6.1.4.1.9.1.1700
>=12.1
IOS
Cisco Catalyst 2960X-48LPS-S Switch
OID:1.3.6.1.4.1.9.1.1701
>=12.1
IOS
Cisco Catalyst 2960X-24PS-S Switch
OID:1.3.6.1.4.1.9.1.1702
>=12.1
IOS
Cisco Catalyst 2960X-48TS-LL Switch
OID:1.3.6.1.4.1.9.1.1703
>=12.1
IOS
Cisco Catalyst 2960X-24TS-LL Switch
OID:1.3.6.1.4.1.9.1.1704
>=12.1
IOS
Cisco Catalyst 2960-XR Series Switches
Device Type
SYSOIDS
S/W Version
Software
Cisco Catalyst 2960XR-48FPD-I Switch
OID:1.3.6.1.4.1.9.1.1797
>=12.1
IOS
Cisco Catalyst 2960XR-48LPD-I Switch
OID:1.3.6.1.4.1.9.1.1798
>=12.1
IOS
Cisco Catalyst 2960XR-48TD-I Switch
OID:1.3.6.1.4.1.9.1.1799
>=12.1
IOS
Cisco Catalyst 2960XR-24PD-I Switch
OID:1.3.6.1.4.1.9.1.1800
>=12.1
IOS
Cisco Catalyst 2960XR-24TD-I Switch
OID:1.3.6.1.4.1.9.1.1801
>=12.1
IOS
Cisco Catalyst 2960XR-48FPS-I Switch
OID:1.3.6.1.4.1.9.1.1802
>=12.1
IOS
Cisco Catalyst 2960XR-48LPS-I Switch
OID:1.3.6.1.4.1.9.1.1803
>=12.1
IOS
Cisco Catalyst 2960XR-48TS-I Switch
OID:1.3.6.1.4.1.9.1.1804
>=12.1
IOS
Cisco Catalyst 2960XR-24PS-I Switch
OID:1.3.6.1.4.1.9.1.1805
>=12.1
IOS
Cisco Catalyst 2960XR-24TS-I Switch
OID:1.3.6.1.4.1.9.1.1806
>=12.1
IOS
Cisco Catalyst 2960XR-48FPD-L Switch
OID:1.3.6.1.4.1.9.1.1807
>=12.1
IOS
Cisco Catalyst 2960XR-48LPD-L Switch
OID:1.3.6.1.4.1.9.1.1808
>=12.1
IOS
Cisco Catalyst 2960XR-48TD-L Switch
OID:1.3.6.1.4.1.9.1.1809
>=12.1
IOS
Cisco Catalyst 2960XR-24PD-L Switch
OID:1.3.6.1.4.1.9.1.1810
>=12.1
IOS
Cisco Catalyst 2960XR-24TD-L Switch
OID:1.3.6.1.4.1.9.1.1811
>=12.1
IOS
Cisco Catalyst 2960XR-48FPS-L Switch
OID:1.3.6.1.4.1.9.1.1812
>=12.1
IOS
Cisco Catalyst 2960XR-48LPS-L Switch
OID:1.3.6.1.4.1.9.1.1813
>=12.1
IOS
Cisco Catalyst 2960XR-48TS-L Switch
OID:1.3.6.1.4.1.9.1.1814
>=12.1
IOS
Cisco Catalyst 2960XR-24PS-L Switch
OID:1.3.6.1.4.1.9.1.1815
>=12.1
IOS
Cisco Catalyst 2960XR-24TS-L Switch
OID:1.3.6.1.4.1.9.1.1816
>=12.1
IOS

Strange issue with speaker - stays on after a call has ended

Hi all,
I have the latest iOS version (7.1) on my iPhone 5.
I haven't had any hardware issues before, but 2 days ago something strange has began happening.
Strange issue with speaker - it stays on after a call has ended and plays the sounds that it gets from the microphone.
Only way to stop it is to make another call and hang up.
Any ideas?

oops...we're in the same boat....look m8 that ios 7.1 is rubish i recently after updating mine the ear stop working i called apple customer care we went throu wiv that adviser we restore the phone up 2...3 times nofin happen then da guy told me finally it was not a software problem....but hardware problem and they booked me up 2 take it 2 the near apple store because it is only from apple u can get da matter fixed however if your phone where unlocked outside your network provider or again from the coner street tech....? 4get cos once those form street unlock your phone you just have the same cover or boby let say it ....but your IMEI and all manufacture detail will changed........the good news is if your phone still have manufacture waranty iz free from apple if your waranty run out? apple will ask you 2 pay up 290£.....
hope this replay may hel you m8
stay bless

Last version Cisco Catalyst 2960-24PC-L Switch (bugs study)

Hi team,
I need know, what´s the last IOS version to Cisco Catalyst 2960-24PC-L Switch and understand the bug study about these versions?
How make a bug study?
If you have any information, please let me know.
Regards,
Yerko.

Latest release as of January 14th is 15.0.2-SE5 (Release Nov 6, 2013)
There aren't any public utilities in the Cisco website that provides you with a bug study.
We have a bug tracker https://tools.cisco.com/bugsearch/?referring_site=popular but it will be extremely time consuming to identify each bugs and if you are affected.
If you are a Cisco Advanced customer with optimization services in your contract, this deliverable can be done for you at no cost.

MIB Extension - Cisco Catalyst 2960 -

Hi everyone,
I would like to monitor a cisco catalyst 2960 provided with IOS v15. I accessed mib files and I found that many component are disabled or have no entry in it (check attachment).
So my question is : Can I extend the mib to support more OIDs ? and if so, I'll be glad if you give a tutorial or example !
Thank you so much.
Best regards,

Your ipRouteTable and EGP MIBs are disabled because the 2960 is a layer-2 switch only, so it does not have any ip routing or EGP. The MIBs will be disabled for features your switch does not support.
Kevin Dorrell
Luxembourg

Strange issue with RAM upgrade: It works but it doesn't! Please help.

Hello Everyone,
I have a very strange issue with my iMac since upgrading my RAM from 4 to 12 gig. When I first installed the new RAM it booted up and ran great. The next time I went to boot the iMac up it swtiched on but didn't get as far as the first white boot up screen. I tried turning it off and on a few times using the power on/off button but still no success. I decided to remove the RAM and reseat it. The computer then booted up again fine. Here's the problem though: when I went to switch my iMac on the next day it wouldn't boot up. Again, I took the RAM out and put it back in and the iMac booted up fine. I've checked the status of the RAM in the system profiler and it reports that everything is OK. So, I'm at a loss. Obviously, I don't want to go through this process every time I want to start up my Mac. Any ideas/solutions would be very gratefully received.
Many thanks in advance.

I completely agree with you. It will be one of the 3 issues you outline. The machine was bought brand new and has never given me a problem. It is just the introduction of the new RAM that has started a problem. However, I did just risk a restart and it booted up fine. I don't know if a restart is any different to shutting down and then pressing the on/off button to start the computer. Maybe my last reseating has done the trick or maybe my thinking is flawed because restarting involves a different process to booting up by pressing the on/off button. I don't know.
In the part of the world I'm sitting in it's night time now so I will leave the diagnostics running and check the results in the morning. I hope the issue is now resolved anyway. This sort of thing takes me back to my dark PC days although in this case I know it's probably not the Mac's fault.
Thanks again. Very much appreciated.

Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
Here's what I did to test:
Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured. I transferred onto their machines, hooked up my Sony D8, and attempted to play the video. It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop). I even tried changing each machine's firewire driver to the legacy one and same results. I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver. Very annoying. I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
I have 2 other things I can try:
1. Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
2. Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/). I can't do it with my Home edition apparantly.
Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
Tim

802.1x on Cisco Catalyst 2960

I am trying to enable 802.1x on one of
the switchports of the Cisco Catalyst
2960:
C2960#sh run | i radius
aaa authentication login test group radius local
aaa authentication dot1x default group radius
radius-server host 10.250.97.26 auth-port 1812 acct-port 1813
radius-server source-ports 1645-1646
radius-server key 123456
C2960#sh run | i dot
aaa authentication dot1x default group radius
dot1x system-auth-control
dot1x guest-vlan supplicant
dot1x critical eapol
C2960#conf t
Enter configuration commands, one per line. End with CNTL/Z.
C2960(config)#int g0/14
C2960(config-if)#dot1x ?
% Unrecognized command
C2960(config-if)#dot1x
As you can see, I can not enable 802.1x
at the interface level. The code is am running is 12.2.25SEE4:
Switch Ports Model SW Version SW Image
* 1 24 WS-C2960G-24TC-L 12.2(25)SEE4 C2960-LANBASEK9-M
System image file is "flash:c2960-lanbasek9-mz.122-25.SEE4.bin"
According to Cisco, this image supports
802.1x. Why can't enable it at the
interface level?
Can someone help me out? Thanks.

some additional info:
C2960#sh dot1x all
Sysauthcontrol Enabled
Dot1x Protocol Version 2
Critical Recovery Delay 100
Critical EAPOL Enabled
C2960#

Error in switch ports POE model, "Cisco Catalyst 2960S-24PS-L Switch"

I have problem with the poe switch Cisco Catalyst 2960S-24PS-L posts does not respond, and me the following error resporta was t
%PLATFORM_ENV-3-ILP_PORT_POST_ERR: %s can’t be brought up because it failed POST
in Inline Power test.
he source of that error and what are the possible causes

Hey Dustin,
Device needs to be RMA'ed. The inline power supply has failed.
HTH.
Regards,
RS.

Strange issue with Exchange system

Hello,
I'm experiencing a strange issue with one of the Exchange 2013 mailbox servers running on Windows 2012. When trying to upgrade it to the new CU5, I'm getting the following errors:
Error:
The local domain needs to be prepared using Setup /PrepareDomain before server roles can be installed.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DomainPrepRequired.aspx
Error:
The Mailbox server role isn't installed on this computer.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UnifiedMessagingRoleNotInstalled.aspx
Error:
The Mailbox server role isn't installed on this computer.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.BridgeheadRoleNotInstalled.aspx
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
In the Exchange organization there are 2 CAS servers, 2 MBX servers.
Memento Mori

Hi Vick,
Based on my research, I suggest you should upgrade the AD first.
1. Exchange 2013 CU5 contains schema changes. To upgrade the Schema to CU5 you can execute the following command:
Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
2. And you also should upgrade the
Configuration Partition and the Domain Partition with the following command:
Setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
Setup.exe /PrepareDomain /IAcceptExchangeServerLicenseTerms
3. After finished above two steps, now you can start to upgrade an Exchange 2013 server to CU5. Open a command prompt and enter the following command:
Setup.exe /Mode:Upgrade /IAcceptExchangeServerLicenseTerms

Strange Issue With QIP 7100 STB and Sony Bravia TV

I am having a strange issue with a 27" Sony Bravia Television connected to a Motorola QIP 7100 HD STB.When viewing a non HD channel the television input number display, resolution display, picture mode display and clock come on and off every few seconds. The issue stops when I tune in to an HD channel. If I return to a non HD channel the issue reappears. I am new to FIOS from Directv where I did not experience this. The television is connected to the STB via HDMI. Everything else seems fine except for picture stuttering that I am getting on all of televisions but I'll save that issue for a separate thread. I tried removing the TV remote to no avail and changing the batteries in both the FIOS and TV remote with no success either. This is a very annoying issue and I feel that it must be caused by the STB. I was wondering if anyone experienced anything similar to this and if they were able to correct the issue. I would greatly appreciate any assistance. Thank you and Happy New Year.

It is possible that your Sony doesn't support the mode the STB is set to for SD (some HDMI TV inputs don't support all formats that the STB can output).
Have you tried going to the STB settings menu and under Video Settings played with the various options for 4:3 override? This setting controls the STB output for SD and lets you set 480i, 480p, and OFF (also STRETCH at least on some firmware version). In the OFF setting the STB upconverts your SD to whatever the HD resolution is set for - 1080i or 720p.
Hope that solves your issue.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

I am facing issues with my music on my iOS device. I have five devices connected to my apple id. And out of which a Windows Machine and iPhone is not able to sync the purchased songs on the the Windows machine and the iPhone.

I am facing issues with my music on my iOS device. I have five devices connected to my apple id. And out of which a Windows Machine and iPhone is not able to sync the purchased songs on the the Windows machine and the iPhone. The iPhone4 shows the songs are not supported and on the Windows Machine the songs do not play completely. Can anyone advice what could have gone wrong ? Because rest of the devices are synced to MacBook and they are able to sync the content normally. I have even subscribed to iTunes Match but the problem is still not fixed.

Firstly... a little Clarity...
Devices refer to iDevices... iPod... iPhone... iPad. .. Not Computers.
Authoriation applies ONLY to Computers... of which there is a Limit of 5 per Apple ID.
If the issue is with iTunes on your Windows Computer... Perhaps you need to Re-install iTunes...
See Here... to Uninstall and Re-Install iTunes...
http://www.apple.com/support/itunes/install/

Strange issue with new Cisco Catalyst 2960 (IOS)

Similar Messages

Maybe you are looking for