Strange issue with Toshiba Tempro v2.2

I have just installed Toshiba Tempro v2.2 on my L300 but every time I click on "View and accept" a black dialog box opens for a while and then closes. How do I fix this problem?

I have same problem, I installed this program today, but when I have puss acept button in the privacy policy, a black window open and nothing happens until it closes, and I start in the same place "View and Accept"..
I use Windows Vista in Spanish.
I tried disabling avira antivir with no luck, then I tried disabling windows firewall and nothing happens.
What kind of third party could I try to disable too?
Thanks
Link: [http://i33.tinypic.com/9isg78.jpg]

Similar Messages

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

Strange issue with RAM upgrade: It works but it doesn't! Please help.

Hello Everyone,
I have a very strange issue with my iMac since upgrading my RAM from 4 to 12 gig. When I first installed the new RAM it booted up and ran great. The next time I went to boot the iMac up it swtiched on but didn't get as far as the first white boot up screen. I tried turning it off and on a few times using the power on/off button but still no success. I decided to remove the RAM and reseat it. The computer then booted up again fine. Here's the problem though: when I went to switch my iMac on the next day it wouldn't boot up. Again, I took the RAM out and put it back in and the iMac booted up fine. I've checked the status of the RAM in the system profiler and it reports that everything is OK. So, I'm at a loss. Obviously, I don't want to go through this process every time I want to start up my Mac. Any ideas/solutions would be very gratefully received.
Many thanks in advance.

I completely agree with you. It will be one of the 3 issues you outline. The machine was bought brand new and has never given me a problem. It is just the introduction of the new RAM that has started a problem. However, I did just risk a restart and it booted up fine. I don't know if a restart is any different to shutting down and then pressing the on/off button to start the computer. Maybe my last reseating has done the trick or maybe my thinking is flawed because restarting involves a different process to booting up by pressing the on/off button. I don't know.
In the part of the world I'm sitting in it's night time now so I will leave the diagnostics running and check the results in the morning. I hope the issue is now resolved anyway. This sort of thing takes me back to my dark PC days although in this case I know it's probably not the Mac's fault.
Thanks again. Very much appreciated.

Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCP

Here's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP

Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
Here's what I did to test:
Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured. I transferred onto their machines, hooked up my Sony D8, and attempted to play the video. It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop). I even tried changing each machine's firewire driver to the legacy one and same results. I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver. Very annoying. I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
I have 2 other things I can try:
1. Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
2. Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/). I can't do it with my Home edition apparantly.
Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
Tim

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

Are you watching this content though iCloud or though from iTunes on your local computer? If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens? This is geerally a much more reliable way to view the content. Easer to fast forward and rewind too.
- I have a stable internet connection
Clearlly you don't
>(Ive tested on other devices)
Which does not tell you anything about the specific connnection from ATV to iCloud.
>I am able to stream Netflix problem free from my AppleTV without so much as a hicup
Again which does not tell you anything about the specific connnection from ATV to iCloud.
>- I am able to download the episodes to my phone, ipad, and computer without any issues
Again which does not tell you anything about the specific connnection from ATV to iCloud. It does remove your ISP throattly traffice as a possible cause though. So that is good.
Have you checked your wireless rounter? Tried doing the factory restor on it? Upgrading it's firmware? Is it and or ATV getting extreamly hot when this problme happens?

Issues with Toshiba Satellites and Western Digital WDC HDDs

As much as I want to thank Jerry Lippey for helping me several times with issues regarding my boyfriend's A665-S6095 laptop, I am DONE with Toshiba.
For the FOURTH or FIFTH time now (it's so bad I've lost count) this satellite has crashed while using a WDC Scorpio Black HDD. I have gone through FOUR HHDs in the last year and a half. I am not joking. NO ONE has time to diagnose and solve this many computer issues in such a short amount of time unless they are a paid techinician.
The last time the HDD failed I tried to get WDC to send me the non-AFT drive that I had bought, but they told me that the BEKT version of the BPKT I bought was "not in stock". For almost a month. And yet it came back in stock on Amazon and one or two other stores online. So when I called back to say WHAT THE HELL, instead of asking me what I wanted them to do, they just decided to send me a larger drive with AFT, as if that would soothe my aggravation.
But honestly, I don't see how this can all be WDC's fault. I mean, if you compare the number of forum posts referencing satellite versus non-satellite models, there is no way that number is proportionally equal to the number of satellite versus non-satellite models sold. I wish I had known how terrible Toshiba is before he bought the laptop, or my mother bought my brother a different satellite model. I'd have told each to shoot themselves in the foot instead.
My boyfriend was trying to copy pictures from his Galaxy Note II onto his laptop, but when he plugged the phone in by a usb/micro usb cord and opened windows explorer, the computer froze.
I shut it down manually, and since then it has not been able to boot at all. BIOS recognizes the drive make and model, but nothing will load; the screen goes black after the Toshiba welcome screen and nothing happens. I tried booting from both a win7 recovery disc and the 1st Toshiba recovery disc I made with the laptop; the former won't load at all and the latter goes through the "windows is loading files" progress bar, then the "microsoft windows" progress bar, brings up the cursor and stops doing anything. I can move the mouse, but the light on the HDD indicator illuminates for about 5 seconds then shuts off for less than a second, over and over. For a fraction of a second I can see an error code reading something like "No Emulation Type 00" before the recovery cd loads. I don't know what that means exactly.
If I hadn't had previous issues with Toshiba TVAP software having compatibility issues with Windows, or if the laptop would freeze part way through installing windows updates I wouldn't have trouble blaming only WDC. But clearly Toshiba has major issues (at least) with Satellites, and except for the one person on this forum who knows what he is talking about - and let's be serious, we can't blame him for not being able to answer EVERYTHING posted on here - their tech support $^(($ B@!!$. Just like their products.
The fact that the only answer I've found is to only replace Toshiba HDDs with OEM HDDs is complete bull.
Sure, it is possible that the way the laptop is used causes some of the issues I've had, but FOUR HDDs? Really? What else in a laptop can go bad that could possibly help to kill off the drive? What else could possibly contribute to the agony I have to go through to keep this laptop running?
Time to go back to work, now that I've spent over an hour trouble-shooting and writing this rant.

Hi I'm fairly new to the forum. I'm sure Jerry will have a reply for you. 4 failed HD's is unreal. I 'm sure you know why HD's fail. I know you are very aggravated, but I would just like to ask a couple of questions. How are you testing these failed HD's. Seatools has two great free programs seatools for windows and seatools dos. Also I'm very curious about your Anti-Virus program. Viruses are really getting tough, and can wipe out your HD in seconds. If your OS gets corrupted, windows will no longer boot. I'm going to post some things that I'm sure you already know. I also would like to know how your boy friend uses his lap top. I live in a retirement village and I fix computers for free. I have see some really bad stuff. I have had to restore a couple back to factory because they were so badly infected. Power surges can really do a number on a HD. I'm going to post the link to a bootable seatools dos. It will be a ISP file and you will need to burn it to a cd. Test your drive and see what happens. I'm sure Jerry will have a comment for you. He's pretty smart.
http://www.seagate.com/support/internal-hard-drives/consumer-electronics/ld25-series/seatools-dos-ma...
Why do hard disks fail?
Because hard disks are mechanical devices, they are subject to wearing out, even if you treat them better than your own children. Around 60% of hard drive failures occur through predictable mechanical failure, with the remaining 40% of failures occurring through misuse. Hard disk failure might occur if any of the following happens:
Your computer is bumped or jostled while it is running;
The electric motor which allows the platter to spin fails due to bad bearings or other components;
The filter on your air intake gets too clogged or the filter isn't working properly;
Extreme heat while running causes the electronic circuit board to fail;
There is a sudden power failure while the disk is writing.
Types of hard drive failure
There are two main types of hard drive failure - physical and logical.
Physical failures are often due to a failure of the electric motor or the drive itself - the moving parts. They can also happen because of a major head crash (caused by your computer being dropped or jostled while it's running).
Logical failures come from corruption in the file system. If you've accidentally deleted an important registry entry or formatted the drive improperly, or if you have a nasty virus, hard drive problems will occur. The BIOS will recognize the drive, but it won't boot.
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Strange issue with external monitor, only working when external speakers plugged in

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap non-apple adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Hello cgoldberg11
Please go to the below link to test if you are having a speaker hardware failure.
Testing for Hardware Failures (Windows 7)
This will rule out hardware failure, let me know how that goes.
Thanks
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. .....
Reguards,
Mo

Biggest issue with Toshiba

I bought a $3,000 tv 65L9300U and have received zero advice on how to get 4k content. The biggest issue with Toshiba beyond its crappy smart tv features is the fact that Toshiba has horrible support. I waited on hold for 45 minutes only for them to tell me that I can only access 4k content through the USB port, which if Fat32. The issue with fat32 is that you can get clips over 4 gigs, which is a huge problem since 4k content is huge. I put a huge 4k file on my exfat32, which can hold more than 4 gigs, but it doesn't work through USB.
If anyone has any advice, let me know. I was thinking of purchasing the NUVOLA NP-1. Anybody have any better suggestions?

Currently, 4K video can only be viewed via HDMI as far as I know.
- Peter

Strange issue with Spry Accordion Panels

Hi, I'm having some strange issues with the Spry Accordion
Panels.
Here is the page:
http://www.bellaclientcenter.com/browncollege/aboutus.html
For some reason when I preview this message it adds extra
characters to the url above, so just delete those off to see the
correct url.
The only browser this does NOT happen in is safari, I'm
seeing it all of my other browsers. You'll notice when you first
load up the page, you'll see that the active panel header
background is green, and the non active is a dark grey. But when
you click one of the other panels they all turn a strange neon blue
color. This is very apparent in firefox.
Any thoughts on this? I've attached the spry css code in case
the problem is there.
thanks so much!!
Jeff

That is because your page is currently invalid. And renders in IE quirksmode..
<base href="http://www.industrialwebsearch.com/">
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
So make sure your page is valid, and the animations will go smooth in ie

Strange issue with speaker - stays on after a call has ended

Hi all,
I have the latest iOS version (7.1) on my iPhone 5.
I haven't had any hardware issues before, but 2 days ago something strange has began happening.
Strange issue with speaker - it stays on after a call has ended and plays the sounds that it gets from the microphone.
Only way to stop it is to make another call and hang up.
Any ideas?

oops...we're in the same boat....look m8 that ios 7.1 is rubish i recently after updating mine the ear stop working i called apple customer care we went throu wiv that adviser we restore the phone up 2...3 times nofin happen then da guy told me finally it was not a software problem....but hardware problem and they booked me up 2 take it 2 the near apple store because it is only from apple u can get da matter fixed however if your phone where unlocked outside your network provider or again from the coner street tech....? 4get cos once those form street unlock your phone you just have the same cover or boby let say it ....but your IMEI and all manufacture detail will changed........the good news is if your phone still have manufacture waranty iz free from apple if your waranty run out? apple will ask you 2 pay up 290£.....
hope this replay may hel you m8
stay bless

Strange issue with Exchange system

Hello,
I'm experiencing a strange issue with one of the Exchange 2013 mailbox servers running on Windows 2012. When trying to upgrade it to the new CU5, I'm getting the following errors:
Error:
The local domain needs to be prepared using Setup /PrepareDomain before server roles can be installed.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DomainPrepRequired.aspx
Error:
The Mailbox server role isn't installed on this computer.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UnifiedMessagingRoleNotInstalled.aspx
Error:
The Mailbox server role isn't installed on this computer.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.BridgeheadRoleNotInstalled.aspx
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
In the Exchange organization there are 2 CAS servers, 2 MBX servers.
Memento Mori

Hi Vick,
Based on my research, I suggest you should upgrade the AD first.
1. Exchange 2013 CU5 contains schema changes. To upgrade the Schema to CU5 you can execute the following command:
Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
2. And you also should upgrade the
Configuration Partition and the Domain Partition with the following command:
Setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
Setup.exe /PrepareDomain /IAcceptExchangeServerLicenseTerms
3. After finished above two steps, now you can start to upgrade an Exchange 2013 server to CU5. Open a command prompt and enter the following command:
Setup.exe /Mode:Upgrade /IAcceptExchangeServerLicenseTerms

Strange issue with the render percentage indicator

Hello,
I'm getting a strange issue with the FCPX interface - the little gauge that shows the percentage complete a render is - seems to have gone crazy! and is spinning round. I've tried changing project/ restarting fcpx and also restarting the mac!
heres a screen capture of it in action... https://www.dropbox.com/s/o9bwexyuntx0jxd/what.mov

This is traced back to a backup issue.. Hopefully a fix will come with 10.1.4
At this time, the solution is to turn off backup per library...
10.1.3 update "backup" mess

Strange issue with an n86

I'm encountering a very strange issue with an n86 lately.
Sometimes when I boot it up it goes through the boot process fine (nokia logo, hands + tune).
But ends up at a white screen.
Strangly I can shutdown the phone normally, and even access the menu.
It's like the only thing that doesn't load right is the standby screen.
The only thing I installed lately is PhoneTorch.
Restarting the phone a few times, makes it work right eventually.
Firmware: V21 (thats the latest available for me)

Could u uninstall the torch app to check if it is the cause of the issue? Lets try the easy one first! If a problem occure right after youve installed something on your device, or changed a setting, it's often wise to try to uninstall or undo what u have done to it. If this fails we have to look at other possible solutions.

Strange issue with left mouse clicking freezing other inputs on the Mac

I'm having a strange issue with my game. I'm using Flash CS6 and a Mac.
I've got a character that I move around the screen with keys, and you can click the left mouse button to make him throw something. The weird issue is when I click the left mouse button a lot, it seems to stop any other inputs from coming in, so for example, if I hold the right arrow key down while I'm doing a left clicking, and then let go of the right arrow key, the character will keep on moving right for a few seconds, until it finally get's the key_up event and stops.
Even not using any mouse event handlers, so the mouse is doing nothing in the game still causes the key inputs to be delayed just by left clicking, any ideas?
I've just tested the .swf on a PC and there was no problem, the mouse clicking was not causing any issues, so it's something peculiar to the Mac.

Hi,
This could be an issue if you were using Safari 5.1+ in 64bit mode. This should go away if you run Safari 5.1+ in 32 bit mode. You can change this by
1. Go to /Applications
2. Find Safari->RightClick->Get Info->Check 'Open in 32-bit mode' check box.
3. Relaunch Safari 5.1 again.
Thanks!
Mohan

Strange issue with Toshiba Tempro v2.2

Similar Messages

Maybe you are looking for