Strange issues with iOS5 and non-working Buttons

I upgraded my iPhone 4 to the new iOS yesterday. Since then:
In the app store, under updates when I click the button to update the apps that need updating the button does not work.
ALSO
In Newsstand I click on the store to look at what's available. I click on any of the available subscriptions and they dont do anything. No option to download or anything.
Thanks for any advice!

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Similar Messages

I have been suggested to down grade to 10.6.6 due to issues with Adobe and Apple working things out. I have downloaded 10.6.6 but wont let me install. Any ideas?

I have been suggested to down grade to 10.6.6 due to issues with Adobe and Apple working things out. I have downloaded 10.6.6 but wont let me install. Any ideas?

Yes, simply reinstall from your Snow Leopard installer disc. The reinstall will not erase the hard drive. After reinstalling you can upgrade to 10.6.6 with your updater.

Strange issue with external monitor, only working when external speakers plugged in

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap non-apple adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Hello cgoldberg11
Please go to the below link to test if you are having a speaker hardware failure.
Testing for Hardware Failures (Windows 7)
This will rule out hardware failure, let me know how that goes.
Thanks
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. .....
Reguards,
Mo

Strange issue with RAM upgrade: It works but it doesn't! Please help.

Hello Everyone,
I have a very strange issue with my iMac since upgrading my RAM from 4 to 12 gig. When I first installed the new RAM it booted up and ran great. The next time I went to boot the iMac up it swtiched on but didn't get as far as the first white boot up screen. I tried turning it off and on a few times using the power on/off button but still no success. I decided to remove the RAM and reseat it. The computer then booted up again fine. Here's the problem though: when I went to switch my iMac on the next day it wouldn't boot up. Again, I took the RAM out and put it back in and the iMac booted up fine. I've checked the status of the RAM in the system profiler and it reports that everything is OK. So, I'm at a loss. Obviously, I don't want to go through this process every time I want to start up my Mac. Any ideas/solutions would be very gratefully received.
Many thanks in advance.

I completely agree with you. It will be one of the 3 issues you outline. The machine was bought brand new and has never given me a problem. It is just the introduction of the new RAM that has started a problem. However, I did just risk a restart and it booted up fine. I don't know if a restart is any different to shutting down and then pressing the on/off button to start the computer. Maybe my last reseating has done the trick or maybe my thinking is flawed because restarting involves a different process to booting up by pressing the on/off button. I don't know.
In the part of the world I'm sitting in it's night time now so I will leave the diagnostics running and check the results in the morning. I hope the issue is now resolved anyway. This sort of thing takes me back to my dark PC days although in this case I know it's probably not the Mac's fault.
Thanks again. Very much appreciated.

Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
Here's what I did to test:
Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured. I transferred onto their machines, hooked up my Sony D8, and attempted to play the video. It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop). I even tried changing each machine's firewire driver to the legacy one and same results. I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver. Very annoying. I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
I have 2 other things I can try:
1. Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
2. Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/). I can't do it with my Home edition apparantly.
Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
Tim

I need help my ipod is unresponsive with a black screen and non working buttons

Help

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Strange issue with imap and a blank empty sent messages folder

So here is a weird one. I got a new computer last week, Mac mini core duo. Set everything up, synced my .Mac and it set up mail. I have been using mail, i try to view Sent Messages for one of my IMAP accounts which should have 10,200 messsages in it. I see nothing. On rebuild mailbox it goes blank. Some messages I send are stored until i rebuild mailbox and it again is empty. On my other Macs (powerbook 12" and dual G4) I am still able to view and manipulate this same accounts Sent Messages. One webmail everything still works as well. While trying to copy old messages down to the Powerbook to archive them I noticed that it was very slow, and messages which were not cached already caused the Copy to fail. I am using Courier IMAP with Maildirs and Postfix on FreeBSD as a server.

my IMAP server uses INBOX as its root.. hence that folder only contains...
INBOX.imapmbox
INBOX
However one level down in INBOX I have...
DeSmit.imapmbox
HealthCareSource HR.imapmbox
SimTech.imapmbox
Lange International.imapmbox
Sandhill Photography.imapmbox
Sales People.imapmbox
Hosting.imapmbox
Marwan.imapmbox
Lucidics.imapmbox
Jeorgea Beck.imapmbox
Web Marketing.imapmbox
Sent.imapmbox
SEBA.imapmbox
Merchant Accounts.imapmbox
The Hired Pens.imapmbox
Kuhl Therapy.imapmbox
Keen Films.imapmbox
PeopleVision.imapmbox
Competition.imapmbox
East Street Woodworking.imapmbox
Cambium Learning.imapmbox
Legal.imapmbox
LFCG.imapmbox
Mailing Lists.imapmbox
Drafts.imapmbox
Ipswitch.imapmbox
Prism Scienceworks.imapmbox
Printers.imapmbox
Mindspark7.imapmbox
Air Media.imapmbox
Demios.imapmbox
Cabem.imapmbox
LexiPixel.imapmbox
Apple.imapmbox
Regent Theatre.imapmbox
Proun Design.imapmbox
Prospects.imapmbox
Goodwin PR.imapmbox
Xplana.imapmbox
Competitive Analysis.imapmbox
Banimon.imapmbox
Zaid.imapmbox
Stay In Touch.imapmbox
Junk.imapmbox
UI Research.imapmbox
Faxes.imapmbox
Dewey Nichols.imapmbox
StrideRite.imapmbox
Future Works.imapmbox
Franklin Cafe.imapmbox
Epsilon.imapmbox
CitySoft.imapmbox
Bearak.imapmbox
Pridgeon Design.imapmbox
BDS.imapmbox
Highland MBP.imapmbox
Create TV.imapmbox
Crystal Clean.imapmbox
Longs Jewelers.imapmbox
Lollipop.imapmbox
AFT.imapmbox
Wholen.imapmbox
Peppercoin.imapmbox
RocketShop.imapmbox
Rocket North.imapmbox
Barrister Books.imapmbox
Venture Capital Fund of NE.imapmbox
bodygard.imapmbox
Blakely Project.imapmbox
Comm Promo.imapmbox
Judith Aronson.imapmbox
Vendors.imapmbox
Trash.imapmbox
Accounts.imapmbox
Agena.imapmbox
Manifesto.imapmbox
Portfolios.imapmbox
Progressive Roofing.imapmbox
Process & Deliverables.imapmbox
Advertising.imapmbox
Chris Zikakis.imapmbox
Mojo Marketing.imapmbox
Lauer Learning.imapmbox
NOME.imapmbox
Nantucket Kneepants.imapmbox
NEMO.imapmbox
Nickelsen Partners.imapmbox
Essential.imapmbox
Lawler Kang.imapmbox
Accounting.imapmbox
Compuworks.imapmbox
Inside of Sent.imapbox we have...
Messages
Info.plist
And inside of Messages are the 2 messages I sent today after testing another rebuild command...
29601.emlx
29193.emlx

Having strange issues with kbmap and utc/localtime

Hello,
I've been using Archlinux for a month or so, never had any problems until now.
1. Setting the keymap doesn't stick. At first I had the German keymap selected in System-Preferences-Keyboard, and at reboot it would switch back to the standard US layout. Yesterday I deleted the current layout and again added German as the default.. And at bootup today I had a russian layout .
2. I haven't been able to get the UTC function properly working.. The hwclock was set in UTC (date -u showed the correct time), UTC was set in the rc.conf, but the Gnome clock always showed the wrong time. (Now localtime is set in rc.conf)
2a. Related to that, I installed openntpd and added it as a startup daemon.. System-Administration-Time and Date still gives me an error message "NTP support is not installed" when I set the configuration to "Keep synchronized with internet servers".
Here's my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/Vienna"
KEYMAP="de"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(atl1 mii slhc vboxdrv
!ac97_bus !snd-mixer-oss !snd-pcm-oss !snd-seq-oss !snd-seq-device !snd-seq-midi-event
!snd-seq !snd-page-alloc !snd-pcm !snd-rawmidi !snd-timer !snd !snd-mpu401-uart
!snd-ak4xxx-adda !snd-cs8427 !snd-i2c !snd-ac97-codec !snd-ice1712 !snd-ice17xx-ak4xxx !soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="localhost"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng !network hal @dhcdbd @networkmanager netfs @crond @acpid
@sensors @oss-linux-free @cups @openntpd gdm)
..and xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder57) Thu Jul 17 18:40:12 PDT 2008
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder57) Thu Jul 17 18:39:19 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "keyboard"
Option "Xkblayout" "de"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "@@@ T19DS"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 77.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 Ultra"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-1"
Option "metamodes" "DFP-0: nvidia-auto-select +1680+0, DFP-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
thanks in advance for any help!

I don’t know that problem, but have you tried if turning off OpenGL and restarting has a bearing on the issue?
Boilerplate-text:
Other than that are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance, font validation, etc.)?

ITunes Sync issues with iOS5, Greyed Sync/Apply button.

Hey guys I'm having this major headache right now with iTunes. I have 3 Apple devices and they all work fine.
The iPhone and iPod Touch both 4g and upgraded to 5.0.1 firmware. Also have an iPhone 3g (This works and is able to sync)
But 4g iPhone and iPod touch won't sync with Itunes. It shows up on the tab.
Screenshot of how it appears. http://dl.dropbox.com/u/4751478/OutToTheWorld/Untitled.jpg
But I can't drag and drop nor sync music because the Sync button is greyed out.
Wifi sync also doesn't work, But I assume this is because the devices aren't syncing properly. I've Restored 3 times, Uninstalled iTunes countless of times.
I've tried Autofill, Doesn't work.
I really don't know what to do anymore. I've look countless of places. Nothing.
Using Windows 7 64bit, iTunes and Devices are all up to date.

I too had a similar issue, although I was able to sync contacts.
With the same exact set-up as Scott, I experienced one way info flow for Calendar and Notes items, i.e. Outlook calendar items transferred to the iphone 5, but not vice versa, and iphone 5 notes transferred to the PC but not vice versa. I'm pretty sure its the same compatibility issue.
I was on the phone with Apple Care supervisor for 45 min to no avail. Finally the supervisor checked and said Apple doesn't support Office 2013. I was able to sync my iPhone 5 with Office 2010, so she thought it was a new bug in Office 2013 neither Apple or Micorosft had worked out. I'm not on iCloud, but maybe Microsoft's new cloud product. Skydrive (Office 2013) is causing the problem.
I am going to try and goto the Microsoft store, but I'm not hopeful. I'll post what i find here. Hopefully someone on this forum has a solution -N

Issue with CDC and Replication enabled

Hello,
We have this strange issue with CDC and replication. Let me explain
1. We have a database on write server and we replicate some tables to the read server. There are 15 tables that we replication and 8 of them have computed columns that are persisted.
2. We also have CDC enabled on the same database where we have transactional replication enabled. I know that both CDC and replication uses replication log reader. Some how, all the time we see the log_reuse_wait says replication
3. If I add around 100-200 MB into these tables, with these persisted columns, it will be around 500 MB of data. But the replication is queuing up 10-15 GB of data.
4. I checked CDC tables, and the updates are in cdc tables. Also, I don't see CDC capture job. Is this because there is already replication enabled?
What might be the issue that's causing the log to hold for a very long extended periods of time? We don't see any issue with log reader and CDC.

2. Log_reuse_wait will show replication status both for CDC and replication.
4. Yes as you are using transaction replication, Log Reader Agent is created for the database and the capture job won’t exist.
When the Log Reader Agent is used for both change data capture and transactional replication, replicated changes are first written to the distribution database.
Then, captured changes are written to the change tables. Both operations are committed together. If there is any latency in writing to the distribution database, there will be a corresponding latency before changes appear in the change tables.
https://msdn.microsoft.com/en-us/library/cc645938.aspx?f=255&MSPPError=-2147217396
As you said CDC updates are in cdc table I don’t see any issue.
You could run DBCC OPENTRAN to see the old active transaction? It will give you more info.

Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help...

Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help... I have scoured the net trying everything the last few days.

Please correct your porfile: iPhone 4 do not have IOS 6.1.4.
The usual troubleshooting steps are, also remember to test it after every step:
1. Restart
2. Reset
3. Restore from backup
4. Restore as new.
If no joy, make an Appointment with the Apple genius and have them evaluate

Strange Issue With QIP 7100 STB and Sony Bravia TV

I am having a strange issue with a 27" Sony Bravia Television connected to a Motorola QIP 7100 HD STB.When viewing a non HD channel the television input number display, resolution display, picture mode display and clock come on and off every few seconds. The issue stops when I tune in to an HD channel. If I return to a non HD channel the issue reappears. I am new to FIOS from Directv where I did not experience this. The television is connected to the STB via HDMI. Everything else seems fine except for picture stuttering that I am getting on all of televisions but I'll save that issue for a separate thread. I tried removing the TV remote to no avail and changing the batteries in both the FIOS and TV remote with no success either. This is a very annoying issue and I feel that it must be caused by the STB. I was wondering if anyone experienced anything similar to this and if they were able to correct the issue. I would greatly appreciate any assistance. Thank you and Happy New Year.

It is possible that your Sony doesn't support the mode the STB is set to for SD (some HDMI TV inputs don't support all formats that the STB can output).
Have you tried going to the STB settings menu and under Video Settings played with the various options for 4:3 override? This setting controls the STB output for SD and lets you set 480i, 480p, and OFF (also STRETCH at least on some firmware version). In the OFF setting the STB upconverts your SD to whatever the HD resolution is set for - 1080i or 720p.
Hope that solves your issue.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Strange issue with USB mouse and USB headset.

Good day everyone.
I was experiencing a rather strange issue with my mouse and headset(both USB).
I am using KDE and ALSA, if that matters.
They are working just fine, but sometimes, when I try to lower\raise volume, my mouse derps out. I can move it around, but I can't click on anything(sometimes though, I can click on stuff in window that was active before and sometimes only on KDE panel) until I re-plug my headset. Then, nothing can use my headset until I reboot.
Anybody ever had that problem?

I've had similar problems for some time now. Unfortunately, I don't know what the issue is either, but perhaps we can come up with some setup similarities and narrow it down. I have similar trouble with just alsa or with pulseaudio, so that's not it. It is unrelated to the DE, as it happened for me in both gnome 2 and xfce 4. It is not related to the machine either, as the same quirks occur in other machines with the same headset. I have had inconclusive results with downgrading to kernel26-lts, the ancient kernel. I thought at some point it messed up and I was sure the older kernel didnt help, but after trying recently-ish, I had no trouble for days -- until I found that I didn't have trouble on the main kernel either. ... then a few days later, it showed up again. Very irritating!
https://bbs.archlinux.org/viewtopic.php?id=122475
Does my old thread sound like your issue somewhat?
Essentially, at times, if the headset (wireless) is changed into a different power state (unplugged/plugged) or the mic state is toggled (mute/unmute), things that could be clicked on normally cant unless theyre in the window already focused -- mostly.
What headset are you using? 32 or 64 bit arch? Have you tried downgrading to kernel26-lts?

Whenever I go to iTunes with my iPod 5th generation 32 gb iPod Touch, running iOS 8.0.2, It tells me that the "Other" category is using up 14.59 gb of data. I have no clue why it says this and I have searched the internet for fixes and none worked.

Whenever I go to iTunes with my iPod 5th generation 32 gb iPod Touch, running iOS 8.0.2, It tells me that the "Other" category is using up 14.59 gb of data. I have no clue why it says this and I have searched the internet for fixes and none worked. I have tried on a windows and a mac and noticed no change. I have tried restoring to a backup but that didn't help. I haven't had time to do a full restore but I will try if the problem persists.

An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

Are you watching this content though iCloud or though from iTunes on your local computer? If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens? This is geerally a much more reliable way to view the content. Easer to fast forward and rewind too.
- I have a stable internet connection
Clearlly you don't
>(Ive tested on other devices)
Which does not tell you anything about the specific connnection from ATV to iCloud.
>I am able to stream Netflix problem free from my AppleTV without so much as a hicup
Again which does not tell you anything about the specific connnection from ATV to iCloud.
>- I am able to download the episodes to my phone, ipad, and computer without any issues
Again which does not tell you anything about the specific connnection from ATV to iCloud. It does remove your ISP throattly traffice as a possible cause though. So that is good.
Have you checked your wireless rounter? Tried doing the factory restor on it? Upgrading it's firmware? Is it and or ATV getting extreamly hot when this problme happens?

Strange issues with iOS5 and non-working Buttons

Similar Messages

Maybe you are looking for