Strange Kernel Panic: no keyboard and mouse

iMac G5, latest OSX. 2GB RAM, 2.1 Ghz, 250GB HD.
A few days ago I was experiencing some techinical difficulties with my iPod shuffle dock. Whenever it was plugged in iTunes would have a hard time recognizing the device, and it would constantly disappear and reappear every few seconds. It went away for a bit and I didn't think anything of it. Then, a few days later, I encountered a relatively serious problem. My mouse and keyboard would just stop working (standard keyboard and mighty mouse, USB), but the computer would keep running in the background.
I restarted the computer a few times, and on each successive start-up the keyboard and mouse would stop working and go unresponsive after a minute or so. Eventually, the problem escalated to kernal panics which would strike at, or a few minutes after start up. A few times, the kernal panics would happen DURING start up, but that problem has seemed to cease.
Obviously, this presents a dilemma. I can't try and find the source of my kernal panics since the keyboard and mouse won't work (even when I try and run OSX off the disc and do a reinstall). Interestingly, I started up the machine in firewire drive mode, and I was able to access and modify the harddrive easily through my iBook (and take the time to back up all of my music, movies, etc.). There seems to be nothing wrong with the computer in that respect. Due to the scenarios in the first paragraph, I get the feeling this is an issue with the USB ports, drivers, or firmware or something.
I plan on taking the computer to the Apple Store tomorrow, but I would rather not have to if anyone here can offer up some helpful advice.
Thanks for reading.

Welcome to Discussions Nick. In order to find out what is causing the problems, go to Library>Logs>panic.log and have a look and see what is written there,
please post back,
Miriam

Similar Messages

  • Keyboard and mouse randomly don't work after boot

    Hello there, I have been having a problem lately  with the keyboard. Some times after the booting process it doesn't work, forcing me to restart my laptop even 3 or 4 times before getting it to work properly.
    Here is the keyboard boot process. wich has actually a problem that I can't understand clearly.
    dmesg |grep keyboard
    [    2.308714] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
    [    2.959550] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    I noticed this error during the boot preocess, how should it be interpreted?
    I'm sure in the kernel, the device atkbd is selected.
    The synaptics mouse instead, doesn't work properly in X
    My mouse is a synaptic touchpad and when I start x, instead of loading the synaptic device, xfce simply see it as ps/2. Also this happens randomly.
    dmesg |grep mouse
    [    2.098008] mousedev: PS/2 mouse device common for all mice
    [    4.836233] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
    [    6.696381] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
    Xorg conf:
    Section "inputdevice"
       identifier "synaptics touchpad"
       driver "synaptics"
        Option "TapButton1" "1"
        Option "TapButton2" "2"
        Option "TapButton3" "3"
    Endsection
    Any suggestion?

    Welcome to Apple Discussions!
    Has your keyboard and mouse quit working altogether or just when the computer is hot? And do I understand that an external keyboard and mouse will work with no problems?
    And I am wondering about your computer running unusually hot. Are your fans operating properly? You might want to run the extended version of the Apple Hardware test to be sure that the fans and thermal sensors are working properly. If they are not, you will get one or more error codes.
    Another thing to do to check when your Mac is unusually hot is the Activity Monitor. Select "All Processes" at the top right and check for any process running that should not be which is using lots of CPU.
    I don't know if the keyboard problem is related to the heat problem or not, but I would want to know what is causing the heat problem too. Over time, excessive heat can cause damage to the logic board. It could also conceivably damage the ribbon cable which connects the keyboard and I would guess that the trackpad could also be affected. So it is important to see what is going on here. If you have been experiencing excessive heat on a regular basis, this might be the underlying cause of your keyboard and trackpad problems. If so, the heat problem will have to be fixed or the other problem will recur over time.
    Try the AHT and post back with any results. Also, use iStatPro to check on your fans and make sure both are running at roughly equal speeds and that they run faster when the computer gets hot.
    Good luck!

  • Keyboard and Mouse don't work after upgrade

    Hi, about one week ago, i've made a system wide upgrade and after reboot my keyboard and mouse stopped working. My hard disk is encrypted and without keyboard i remain at the prompt which asks my password to unlock the encrypted partitions. So i don't even arrive to login manager. I tried all the solutions i could find but none of them worked for me.  I saw similar posts on the forum and i'm sorry if i'm posting it in wrong place.
    Here is my  Xorg.0.log file, it seems like because of hotplugging, xorg disables mouse and keyboard but i couldn't disable hotplugging with the given methods like adding flag to the /etc/X11/xorg.conf file:
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    EndSection
    I 've installed/deleted xf86-input-keyboard/mouse and reinstalled xf86-input-evdev etc and it didn't work.
    I tried to downgrade to different versions of kernel, i didn't work.
    There are "00-keyboard.conf"   "10-evdev.conf"      "10-quirks.conf"     "50-synaptics.conf"    files under  /etc/X11/xorg.conf.d
    So i don't know what to do else, i hope someone can help me.

    ewaller wrote:
    When you boot to the Ubuntu system, before you chroot, look at the output of lsmod and note the modules in use.  In particular, I am interested in modules that contain 'lpc',  So try lsmod | grep lpc
    lpc_ich 21163 0
    Post the module names that that finds here.  Also, look in your initrd for modules for the LPC bus driver.  It does not exist in mine.
    ./usr/lib/modules
    ./usr/lib/modules/3.15.8-1-ARCH
    ./usr/lib/modules/3.15.8-1-ARCH/modules.alias.bin
    ./usr/lib/modules/3.15.8-1-ARCH/modules.builtin.bin
    ./usr/lib/modules/3.15.8-1-ARCH/modules.devname
    ./usr/lib/modules/3.15.8-1-ARCH/modules.dep.bin
    ./usr/lib/modules/3.15.8-1-ARCH/kernel
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/padlock-aes.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd256.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish_common.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/tcrypt.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-mod.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/aes-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/af_alg.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/padlock-sha.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha512_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ccp.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/authenc.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ctr.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-aesni-avx-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-avx-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sr_mod.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha256-ssse3.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/glue_helper.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/md4.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rng-core.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/async_raid6_recov.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/async_tx.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/serio.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/seqiv.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-x86_64-3way.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ccp-crypto.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crypto_user.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/usb-common.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-region-hash.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crypto_null.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ansi_cprng.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cast5_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/hmac.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cast_common.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/deflate.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cdrom.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cmac.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rsa.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cast5-avx-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cast6_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/usb-storage.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/i8042.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/xts.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-avx2.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/scsi_mod.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/seed.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ehci-hcd.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/algif_skcipher.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/public_key.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/xor.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/zlib.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crc-t10dif.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/authencesn.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/mbcache.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/vmac.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha256_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sd_mod.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/async_pq.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/mpi.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/usbcore.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-crypt.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ehci-pci.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-log.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ecb.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/raid6_pq.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crc16.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/algif_hash.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32c_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-sse2-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif_common.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-snapshot.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ccm.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/salsa20_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-avx-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd128.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha1_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/xhci-hcd.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-aesni-avx2.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4_compress.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/raid6test.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/oid_registry.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/salsa20-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha512-ssse3.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd160.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/gf128mul.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4hc.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/gcm.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cts.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/xcbc.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/async_xor.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-mirror.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/x509_key_parser.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/asn1_decoder.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif-pclmul.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/aesni-intel.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/usbhid.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/lrw.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ext4.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-bufio.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/arc4.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/michael_mic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/libahci.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/uas.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/jbd2.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/tea.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32c-intel.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cast6-avx-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/sha1-ssse3.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/pcrypt.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/hid.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/fcrypt.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/des_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-x86_64.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/libps2.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/pcbc.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/tgr192.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cbc.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ablk_helper.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent_generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/asymmetric_keys.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd320.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/anubis.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/khazad.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/libata.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ghash-clmulni-intel.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/async_memcpy.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish_common.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ahci.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/wp512.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4hc_compress.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32-pclmul.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/atkbd.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/ghash-generic.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/md5.ko
    ./usr/lib/modules/3.15.8-1-ARCH/kernel/cryptd.ko
    ./usr/lib/modules/3.15.8-1-ARCH/modules.symbols.bin
    But, my keyboard and touchpad don't exist in the ISA bus address space.  Things that used to live on the 1980's vintage ISA bus (like serial UARTS and ancient keyboard controllers) are now serviced by the serial LPC bus.  I think you don't have that driver available in the initrd preboot environment
    Sorry, i'm not good at these things, so which driver i should install if it's the case? (By the way, i added  atkbd to the MODULES= and "earlymodules=atkbd modules-load=atkbd" to the kernel parameters, but i didn't make any change.)
    Pse wrote:
    Note that you shouldn't do this as a permanent solution, but just to get through the bootloader issue for now, manually edit /boot/grub/grub.cfg and change the relevant lines to point to the LTS kernel (in other words, grub-mkconfig should NOT fail, but that's not your biggest problem right now). This way the entry that pointed to the common kernel should now point to the LTS one.
    You can find the LTS kernel files in /boot; the names should give them away. Remember to change both the kernel and initrd lines in grub.cfg.
    In fact, i also have done as you told(by changing lines to the lts) and read about the error that grub-mkconfig gives me. It says it's ok, error is not important it should work properly. So i have some problem with my bootloader. I can't see the boot option anyway. Problem must be about UEFI because i remember that i had booting problems also when i first installed arch to my computer. I see all lts and lts.img files under /boot directory but somehow don't see as boot option.
    Anyway, thanks a lot for all your help, maybe i do something wrong, i can't solve the problen. I'm going to reinstall my system, because i don't have time anymore. I hope at least this post would be useful for somebody else.

  • When I disable my left windows key for gameing using Microsoft keyboard and mouse software, I can no longer type in firefox. How can i fix this?

    Microsoft Keyboard and Mouse Software that you install with Microsoft keyboard and mice, (latest version) allows you to disable your windows key so that you don't accidentally hit it when gaming. When I take advantage of this feature, I can no longer type in Firefox. Typing in Firefox is completely disabled. Other browsers, windows, applications work, but not Firefox. What is it about the windows key that firefox needs for typing. Strange problem, but annoying because I have to use a different browser while game. Certainly not a deal breaker, but kinda strange.

    Try:
    *[[/questions/947513]]

  • External keyboard and mouse not working in closed clamshell mode

    Hi - can someone help with this strange issue.  Yesterday in closed clamshall everything was working fine. Today I cannot use my external keyboard and mouse.  Note the external monitor does show the screen (after the blue flicker etc), but keyboard and mouse is just not detected.
    Using Mac OS X (10.7.5).  Tried fiddling the "mirror" settings etc in the display preferences but nothing seems to help.  Really annoying....please help

    don't worry - figured it out !

  • Is the Microsoft 5MH-00001 Wired Desktop 400 keyboard and mouse compatible with mac mini?

    Hello, is the Microsoft 5MH-00001 Wired Desktop 400 for Business mouse and keyboard compatible with the mac mini computer? I tried using a generic mouse and the lights of the mouse were on, but I could not click or move the mouse around. Then when I plugged in a dell keyboard, it said the "keyboard is not identified". I could press buttons on the keyboard, but they werent being registered by the mac. I also tried changing my mouse's usb to a different port, but still did not work. So I am worried that the microsoft wired mouse + keyboard I ordered might not work on my mac mini. Is there a way to get my old keyboard and mouse to work at least?

    Were these other ones you tried Wired also? If so that's really strange!?
    Did you try rebooting with them connected?
    I see no reason for the Microsoft 5MH-00001 Wired Desktop 400 for Business to not work, but then any wired Generic KB should work!???

  • Cannot Access Keyboard and Mouse Preferences

    For some reason I've had lots of problems accessing the Keyboard and Mouse preference pane of the System Preferences.
    Prior, I could open the pane, and whenever i switched between keyboard, mouse and trackpad, I would get overlap. Basically, bits and pieces from each setting wouldn't disappear when the new device (either keyboard, or trackpad, or mouse, etc) was selected, so everything would look mumble-jumbled.
    Now, however, I can't even open the settings. I've rebooted, Repaired permissions and relaunched finder, but have had no luck. When I click on the Keyboard and mouse Button, all I get is a message in the title bar of the window itself saying: "Loading Keyboard & Mouse..." with no effect. Any ideas???

    I was having the same problem too. I deleted some preference file (sorry I can't remember which one, I found it here on the forums) and it started working. Sort of... Now I can actually open up the "Keyboard and Mouse" pane, but when I click on the mouse button I don't have the correct options.
    I have a 2-button wheel mouse connected, but I don't have the option to assign the wheel button a function. I can't assign the left and right buttons functions either. The only option is to make the "Primary mouse button" left or right. It also has controls for tracking speed, scroll speed, and double-click speed. But I've lost the ability to assign the buttons to the functions I want them assigned to.
    The even stranger part is that the buttons do what I want them to do still. My right button acts like a right-click (control-click) even though it doesn't show on the mouse preferences.
    I want to be able to change the wheel button so that it doesn't activate my Dashboard but I can't. If I press too hard while scrolling up or down with the wheel the Dashboard is activated. It's so annoying...

  • Bluetooth keyboard and mouse failures

    I have brand new PowerBook G4 15" with Bluetooth. I also have brand new Bluetooth wireless Apple keyboard and mouse. I am running 10.4.5. The keyboard and mouse lose contact with the computer on a regular basis, even though they are right next to each other. Sometimes I get the error sign on the computer, sometimes not. Batteries are fresh. Reboot fixes problem. Apple tech support says "interference" might be problem, but I don't have anything nearby except Linksys wireless router. Any ideas?
    PowerBook G4 Mac OS X (10.4.5)
    PowerBook G4 Mac OS X (10.4.4)
    PowerBook G4 Mac OS X (10.4.5)

    Over the weekend my BT apple keyboard has been doing multiple strange things as well.
    First, the batteries died, something that, of course, happens from time to time. Replaced with the same brand/type as always.
    Later in the same weekend then I was typing and began suffering from a strange random keypress problem. Q for instance, began equaling 'ew' while space started equaling '['.
    Odd.
    I shelved the keyboard with the intent to call Apple today.
    Now I get home from work, reconnect the KB, and lo-and-behold, it works! I was thrilled. Now, after 3 hours of use, the same problems start back up. This is obviously therefore not a KB related issue but a software related issue or else it would now reliably do the same key oddities that it had been doing.
    I've trashed the BT preferences and am about to restart, but I don't think it's time to buy a new keyboard just yet for those of you having similar BT keyboard problems.

  • Bluetooth keyboard and mouse connectivity problems

    I have an Apple bluetooth keyboard and Mighty Mouse connected to my Macbook Pro 13", running ML 10.8.1.
    The keyboard and mouse will constantly disconnect and re-connect on their own every few minutes. I'll see the "connection lost" notification, and then shortly after the "connected" notification. Also, even when the keyboard is connected, it often becomes unresponsive and/or strange things happen, such as the special characters menu appearing above the cursor (which I believe there is a keyboard shortcut to invoke, but I'm not doing that; it appears on its own).
    This never happened in Lion.
    Any idea what's happening and how to fix it?

    Hello:
    Try making the devices favorites.
    Barry

  • Firewireport on MacBook 1.1 freezes Keyboard and Mouse

    Hello,
    I haven´t been using the Firewireport on my MacBook for some time now, it always worked without any problems. But yesterday i recognized that the Port doesn´t work anymore, after connecting my DV-Camcorder keyboard and mouse froze immediately. After a "Hard-Restart" i looked in the loogs and fount this:
    29.08.12 09:29:13
    kernel
    FireWire (OHCI) Lucent ID 5811 built-in: handleARxRspInt - ARx Response packet error, status = 0xe00002c7
    29.08.12 09:29:14
    kernel
    FireWire (OHCI) Lucent ID 5811 built-in: handleARxRspInt - ARx Response packet error, status = 0xe00002c7
    This is logged as long as a Firewire Device (DV Camcorder, Harddisk....) is connected to the port.
    I remember that i installed MacPorts a while ago, but i am not sure if this causes these problems.
    Also resetting PRAM and SMC didn´t solve the problem.
    Running Apple Hardware Test didn´t show up any problems.
    Installed Mac OS X Version is 10.6.8 Snow Leopard.
    Oh yes, if i Press T while booting and start the Firewire HD Mode then connecting to another Mac will also freeze the MacBook
    Has anyone an idea how to find out if it´s a software or hardware problem?
    Thanks,

    Thank you again OGELTHORPE, the only problem I live far away from an apple store so will be very difficult for me to go.
    But I would like to know if other people out there was experiencing the same fault with this macbook pro 2010, I saw in the Internet this two pages with the same problem but no one answer back to the guy:
    https://discussions.apple.com/thread/3703959?start=0&tstart=0
    and also this other page on the apple forum:
    http://forums.macrumors.com/showthread.php?t=1317993
    But THANKS anyway to reply to me I really appricieted.

  • Why have my Logitech wireless keyboard and mouse suddenly become poky and erratic?

    Hi, I'm running a new mac mini (Dec 2014) with 10.10.2 on it.  Out of the blue today my Logitech wireless accessories (with unifying receiver) became very sluggish with overall slow response times and at times the mouse is completely unresponsive.  It really was working just fine until today.  I went out and bought a new mouse to see if that would rectify it - and I still have the same kind of odd mouse behavior. 
    What's different between today and yesterday?  I installed Dropbox and the new Microsoft '16 suite.  I can't imagine that those two suites would impact a keyboard and mouse.  I even did a refresh of the O.S.  Any suggestions?

    Thank you for trying to assist me Bob.  Here's my EtreCheck output. 
    Problem description:
    My logitech mouse and keyboard have become very erratic
    EtreCheck version: 2.1.8 (121)
    Report generated March 8, 2015 at 7:02:55 AM CDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        Mac mini (Late 2014) (Technical Specifications)
        Mac mini - model: Macmini7,1
        1 1.4 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Not upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n/ac
    Video Information: ℹ️
        Intel HD Graphics 5000
            S24D390 spdisplays_1080p
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 10:54:12
    Disk Information: ℹ️
        APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.89 GB (404.50 GB free)
                Core Storage: disk0s2 499.25 GB Online
    USB Information: ℹ️
        Western Digital My Book 1140 3 TB
            EFI (disk2s1) <not mounted> : 315 MB
            Back Up Drive (disk2s2) /Volumes/Back Up Drive : 3.00 TB (2.23 TB free)
        Logitech USB Receiver
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/VyprVPN.app
        [loaded]    foo.tap (1.0) [Click for support]
        [loaded]    foo.tun (1.0) [Click for support]
            /Library/Extensions
        [loaded]    com.Logitech.Control Center.HID Driver (3.9.1 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [loaded]    com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) [Click for support]
    Launch Agents: ℹ️
        [running]    com.Logitech.Control Center.Daemon.plist [Click for support]
    Launch Daemons: ℹ️
        [running]    vyprvpnservice.plist [Click for support]
    User Launch Agents: ℹ️
        [failed]    com.lastpass.LastPassHelper.plist [Click for support]
        [running]    com.PKWARE.Viivo.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        VyprVPN    Application  (/Applications/VyprVPN.app)
        EvernoteHelper    Application  (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    Internet Plug-ins: ℹ️
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        nplastpass: Version: 3.1.89 - SDK 10.10 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        SlingPlayer: Version: Unknown - SDK 10.8 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
    Safari Extensions: ℹ️
        Evernote Web Clipper
        LastPass
    3rd Party Preference Panes: ℹ️
        Logitech Control Center  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             6%    Dropbox
             4%    WindowServer
             3%    firefox
             1%    Viivo
             0%    fontd
    Top Processes by Memory: ℹ️
        593 MB    firefox
        150 MB    com.apple.WebKit.WebContent
        137 MB    Evernote
        116 MB    Dropbox
        107 MB    Safari
    Virtual Memory Information: ℹ️
        131 MB    Free RAM
        1.76 GB    Active RAM
        1.52 GB    Inactive RAM
        684 MB    Wired RAM
        15.37 GB    Page-ins
        290 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 7, 2015, 07:07:34 PM    Self test - passed
        Mar 7, 2015, 05:34:08 PM    /Library/Logs/DiagnosticReports/vyprvpnservice_2015-03-07-173408_[redacted].cra sh
        Mar 7, 2015, 04:58:31 PM    /Library/Logs/DiagnosticReports/vyprvpnservice_2015-03-07-165831_[redacted].cra sh
        Mar 7, 2015, 06:49:17 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/EvernoteHelper_2015-03-07-0649 17_[redacted].crash

  • Keyboard and mouse not working after boot

    Hello!
    it's my first time here
    I have been using archlinux for a couple of months and after an upgrade, my mouse and keyboard stopped working.
    I have also posted it on linuxquestions:
    http://www.linuxquestions.org/questions … ot-934040/
    What might be causing that problem?
    and, considering the problem occurred after an upgrade, reinstalling the system would correct it?

    when booting into runlevel 3, the keyboard and mouse works fine.
    my pacman.log(only for the update day) and messages.log are:
    Mar 11 11:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 11:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 11:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 11:35:37 myhost dhcpcd[2756]: eth0: eth0: MTU set to 576
    Mar 11 11:39:41 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 11:39:41 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 11:39:41 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 11:42:11 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 11:42:11 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 11:42:11 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 11:44:41 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 11:44:41 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 11:44:41 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:06:33 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:06:33 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:06:33 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:16:45 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:16:45 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:16:45 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:19:15 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:19:15 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:19:15 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:21:45 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:21:45 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:21:45 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:23:41 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:23:41 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:23:41 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:31:56 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:31:56 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:31:56 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:34:26 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:34:26 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:34:26 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 12:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 12:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 12:35:37 myhost dhcpcd[2926]: eth0: eth0: MTU set to 576
    Mar 11 12:36:56 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:36:56 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:36:56 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:40:27 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:40:27 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:40:27 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:52:30 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:52:30 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:52:30 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:55:00 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:55:00 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:55:00 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 12:57:30 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 12:57:30 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 12:57:30 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 13:21:01 myhost -- MARK --
    Mar 11 13:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 13:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 13:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 13:35:37 myhost dhcpcd[3041]: eth0: eth0: MTU set to 576
    Mar 11 13:55:37 myhost -- MARK --
    Mar 11 14:21:01 myhost -- MARK --
    Mar 11 14:35:37 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 14:35:37 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 14:35:37 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 14:35:37 myhost dhcpcd[3095]: eth0: eth0: MTU set to 576
    Mar 11 14:55:37 myhost -- MARK --
    Mar 11 15:21:01 myhost -- MARK --
    Mar 11 15:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 15:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 15:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 15:35:38 myhost dhcpcd[3144]: eth0: eth0: MTU set to 576
    Mar 11 15:55:38 myhost -- MARK --
    Mar 11 16:21:01 myhost -- MARK --
    Mar 11 16:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 16:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 16:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 16:35:38 myhost dhcpcd[3192]: eth0: eth0: MTU set to 576
    Mar 11 16:51:02 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 16:51:02 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 16:51:02 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 17:21:01 myhost -- MARK --
    Mar 11 17:27:48 myhost init: Trying to re-exec init
    Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:25 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:34 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:46 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:47 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:28:47 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:04 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:04 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:04 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:05 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:14 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:19 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:19 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:19 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:29:20 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:30:18 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:31:15 myhost kernel: [25090.053873] mdadm: sending ioctl 800c0910 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.053877] mdadm: sending ioctl 800c0910 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.053883] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.053885] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.060059] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.060061] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.076899] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.076902] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.077037] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:31:15 myhost kernel: [25090.077039] mdadm: sending ioctl 1261 to a partition!
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:32:15 myhost dbus[434]: [system] Reloaded configuration
    Mar 11 17:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 17:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 17:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 17:35:38 myhost dhcpcd[6669]: eth0: eth0: MTU set to 576
    Mar 11 17:55:07 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 17:55:07 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 17:55:07 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 17:57:37 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 17:57:37 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 17:57:37 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 18:00:07 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 18:00:07 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 18:00:07 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 18:17:33 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 18:17:33 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 18:17:33 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 18:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 18:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 18:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 18:35:38 myhost dhcpcd[7243]: eth0: eth0: MTU set to 576
    Mar 11 18:55:39 myhost -- MARK --
    Mar 11 19:21:01 myhost -- MARK --
    Mar 11 19:27:03 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 19:27:04 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 19:27:04 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 19:29:33 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 19:29:33 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 19:29:33 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 19:32:03 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 19:32:03 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 19:32:03 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 19:34:05 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 19:34:05 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 19:34:05 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 19:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 19:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 19:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 19:35:38 myhost dhcpcd[8708]: eth0: eth0: MTU set to 576
    Mar 11 19:55:38 myhost -- MARK --
    Mar 11 20:21:01 myhost -- MARK --
    Mar 11 20:32:12 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 20:32:12 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 20:32:12 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 20:34:42 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 20:34:42 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 20:34:42 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 20:35:38 myhost dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
    Mar 11 20:35:38 myhost dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
    Mar 11 20:35:38 myhost dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
    Mar 11 20:35:38 myhost dhcpcd[10147]: eth0: eth0: MTU set to 576
    Mar 11 20:37:12 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 20:37:12 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 20:37:12 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 20:48:37 myhost dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    Mar 11 20:48:37 myhost org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    Mar 11 20:48:37 myhost dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Mar 11 20:54:44 myhost shutdown[10347]: shutting down for system halt
    Mar 11 20:54:44 myhost init: Switching to runlevel: 0
    Mar 11 20:54:48 myhost dhcpcd[10522]: sending signal 1 to pid 1269
    Mar 11 20:54:48 myhost dhcpcd[1269]: received SIGHUP, releasing
    Mar 11 20:54:48 myhost dhcpcd[1269]: eth0: releasing lease of 192.168.1.100
    Mar 11 20:54:48 myhost dhcpcd[10522]: waiting for pid 1269 to exit
    Mar 11 20:54:48 myhost dhcpcd[10527]: eth0: eth0: MTU restored to 1500
    Mar 11 20:54:49 myhost dhcpcd[1269]: eth0: removing interface
    Mar 12 10:23:35 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
    Mar 12 10:23:35 myhost kernel: [ 0.000000] Initializing cgroup subsys cpu
    Mar 12 10:23:35 myhost kernel: [ 0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
    Mar 12 10:23:35 myhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-provided physical RAM map:
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Mar 12 10:23:35 myhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0Mar 12 10:25:59 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Initializing cgroup subsys cpu
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-provided physical RAM map:
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] NX (Execute Disable) protection: active
    Mar 12 10:25:59 myhost kernel: [ 0.000000] DMI present.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] No AGP bridge found
    Mar 12 10:25:59 myhost kernel: [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Mar 12 10:25:59 myhost kernel: [ 0.000000] last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Using GB pages for direct mapping
    Mar 12 10:25:59 myhost kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffc0000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] RAMDISK: 3759a000 - 37ff0000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: RSDP 00000000000fa1f0 00014 (v00 ACPIAM)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: RSDT 00000000bffc0000 00038 (v01 021709 RSDT1317 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: FACP 00000000bffc0200 00084 (v01 021709 FACP1317 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: DSDT 00000000bffc04a0 04880 (v01 1ADKR 1ADKR017 00000017 INTL 20051117)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: FACS 00000000bffce000 00040
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: APIC 00000000bffc0390 00080 (v01 021709 APIC1317 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: MCFG 00000000bffc0410 0003C (v01 021709 OEMMCFG 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: WDRT 00000000bffc0450 00047 (v01 021709 NV-WDRT 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: OEMB 00000000bffce040 00071 (v01 021709 OEMB1317 20090217 MSFT 00000097)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24
    Mar 12 10:25:59 myhost kernel: [ 0.000000] No NUMA configuration found
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Faking a node at 0000000000000000-0000000140000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Zone PFN ranges:
    Mar 12 10:25:59 myhost kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Normal 0x00100000 -> 0x00140000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Movable zone start PFN for each node
    Mar 12 10:25:59 myhost kernel: [ 0.000000] early_node_map[3] active PFN ranges
    Mar 12 10:25:59 myhost kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
    Mar 12 10:25:59 myhost kernel: [ 0.000000] 0: 0x00000100 -> 0x000bffc0
    Mar 12 10:25:59 myhost kernel: [ 0.000000] 0: 0x00100000 -> 0x00140000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_override
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
    Mar 12 10:25:59 myhost kernel: [ 0.000000] IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
    Mar 12 10:25:59 myhost kernel: [ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000bffce000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffce000 - 00000000bfff0000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfffe000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfffe000 - 00000000fec00000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Allocating PCI resources starting at bfffe000 (gap: bfffe000:3ec02000)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
    Mar 12 10:25:59 myhost kernel: [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82176 r8192 d24320 u524288
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027914
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Policy zone: Normal
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Checking aperture...
    Mar 12 10:25:59 myhost kernel: [ 0.000000] No AGP bridge found
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Node 0: aperture @ 748000000 size 32 MB
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Aperture beyond 4GB. Ignoring.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Please enable the IOMMU option in the BIOS setup
    Mar 12 10:25:59 myhost kernel: [ 0.000000] This costs you 64 MB of RAM
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Memory: 3974248k/5242880k available (4488k kernel code, 1049284k absent, 219348k reserved, 4409k data, 736k init)
    Mar 12 10:25:59 myhost kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Preemptible hierarchical RCU implementation.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Verbose stalled-CPUs detection is disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Console: colour VGA+ 80x25
    Mar 12 10:25:59 myhost kernel: [ 0.000000] console [tty0] enabled
    Mar 12 10:25:59 myhost kernel: [ 0.000000] allocated 33554432 bytes of page_cgroup
    Mar 12 10:25:59 myhost kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Fast TSC calibration using PIT
    Mar 12 10:25:59 myhost kernel: [ 0.000000] Detected 2109.668 MHz processor.
    Mar 12 10:25:59 myhost kernel: [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4221.14 BogoMIPS (lpj=7032226)
    Mar 12 10:25:59 myhost kernel: [ 0.003342] pid_max: default: 32768 minimum: 301
    Mar 12 10:25:59 myhost kernel: [ 0.003370] Security Framework initialized
    Mar 12 10:25:59 myhost kernel: [ 0.003376] AppArmor: AppArmor disabled by boot time parameter
    Mar 12 10:25:59 myhost kernel: [ 0.003905] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.007031] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.007954] Mount-cache hash table entries: 256
    Mar 12 10:25:59 myhost kernel: [ 0.008114] Initializing cgroup subsys cpuacct
    Mar 12 10:25:59 myhost kernel: [ 0.008121] Initializing cgroup subsys memory
    Mar 12 10:25:59 myhost kernel: [ 0.008131] Initializing cgroup subsys devices
    Mar 12 10:25:59 myhost kernel: [ 0.008133] Initializing cgroup subsys freezer
    Mar 12 10:25:59 myhost kernel: [ 0.008136] Initializing cgroup subsys net_cls
    Mar 12 10:25:59 myhost kernel: [ 0.008138] Initializing cgroup subsys blkio
    Mar 12 10:25:59 myhost kernel: [ 0.008192] CPU: Physical Processor ID: 0
    Mar 12 10:25:59 myhost kernel: [ 0.008194] CPU: Processor Core ID: 0
    Mar 12 10:25:59 myhost kernel: [ 0.008197] mce: CPU supports 6 MCE banks
    Mar 12 10:25:59 myhost kernel: [ 0.008208] using AMD E400 aware idle routine
    Mar 12 10:25:59 myhost kernel: [ 0.009025] ACPI: Core revision 20110623
    Mar 12 10:25:59 myhost kernel: [ 0.011442] ftrace: allocating 17394 entries in 69 pages
    Mar 12 10:25:59 myhost kernel: [ 0.014007] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
    Mar 12 10:25:59 myhost kernel: [ 0.047059] CPU0: AMD Phenom(tm) 8400 Triple-Core Processor stepping 02
    Mar 12 10:25:59 myhost kernel: [ 0.049997] Performance Events: AMD PMU driver.
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... version: 0
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... bit width: 48
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... generic registers: 4
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... value mask: 0000ffffffffffff
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... max period: 00007fffffffffff
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... fixed-purpose events: 0
    Mar 12 10:25:59 myhost kernel: [ 0.049997] ... event mask: 000000000000000f
    Mar 12 10:25:59 myhost kernel: [ 0.066733] NMI watchdog enabled, takes one hw-pmu counter.
    Mar 12 10:25:59 myhost kernel: [ 0.093342] Booting Node 0, Processors #1
    Mar 12 10:25:59 myhost kernel: [ 0.190007] NMI watchdog enabled, takes one hw-pmu counter.
    Mar 12 10:25:59 myhost kernel: [ 0.210005] #2
    Mar 12 10:25:59 myhost kernel: [ 0.306665] NMI watchdog enabled, takes one hw-pmu counter.
    Mar 12 10:25:59 myhost kernel: [ 0.313317] Brought up 3 CPUs
    Mar 12 10:25:59 myhost kernel: [ 0.313319] Total of 3 processors activated (12662.21 BogoMIPS).
    Mar 12 10:25:59 myhost kernel: [ 0.315139] devtmpfs: initialized
    Mar 12 10:25:59 myhost kernel: [ 0.317377] PM: Registering ACPI NVS region at bffce000 (139264 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.317603] print_constraints: dummy:
    Mar 12 10:25:59 myhost kernel: [ 0.317656] NET: Registered protocol family 16
    Mar 12 10:25:59 myhost kernel: [ 0.317767] TOM: 00000000c0000000 aka 3072M
    Mar 12 10:25:59 myhost kernel: [ 0.317784] TOM2: 0000000140000000 aka 5120M
    Mar 12 10:25:59 myhost kernel: [ 0.317805] Extended Config Space enabled on 1 nodes
    Mar 12 10:25:59 myhost kernel: [ 0.317819] ACPI: bus type pci registered
    Mar 12 10:25:59 myhost kernel: [ 0.317893] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Mar 12 10:25:59 myhost kernel: [ 0.317896] PCI: not using MMCONFIG
    Mar 12 10:25:59 myhost kernel: [ 0.317898] PCI: Using configuration type 1 for base access
    Mar 12 10:25:59 myhost kernel: [ 0.317899] PCI: Using configuration type 1 for extended access
    Mar 12 10:25:59 myhost kernel: [ 0.318408] bio: create slab <bio-0> at 0
    Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(Module Device)
    Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(Processor Device)
    Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(3.0 _SCP Extensions)
    Mar 12 10:25:59 myhost kernel: [ 0.318408] ACPI: Added _OSI(Processor Aggregator Device)
    Mar 12 10:25:59 myhost kernel: [ 0.321075] ACPI: Executed 1 blocks of module-level executable AML code
    Mar 12 10:25:59 myhost kernel: [ 0.322673] ACPI: Interpreter enabled
    Mar 12 10:25:59 myhost kernel: [ 0.322677] ACPI: (supports S0 S1 S4 S5)
    Mar 12 10:25:59 myhost kernel: [ 0.322695] ACPI: Using IOAPIC for interrupt routing
    Mar 12 10:25:59 myhost kernel: [ 0.322713] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Mar 12 10:25:59 myhost kernel: [ 0.323739] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    Mar 12 10:25:59 myhost kernel: [ 0.353905] ACPI: No dock devices found.
    Mar 12 10:25:59 myhost kernel: [ 0.353908] HEST: Table not found.
    Mar 12 10:25:59 myhost kernel: [ 0.353912] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Mar 12 10:25:59 myhost kernel: [ 0.354095] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Mar 12 10:25:59 myhost kernel: [ 0.354265] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    Mar 12 10:25:59 myhost kernel: [ 0.354268] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    Mar 12 10:25:59 myhost kernel: [ 0.354271] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    Mar 12 10:25:59 myhost kernel: [ 0.354273] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
    Mar 12 10:25:59 myhost kernel: [ 0.354276] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff]
    Mar 12 10:25:59 myhost kernel: [ 0.354279] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
    Mar 12 10:25:59 myhost kernel: [ 0.355812] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
    Mar 12 10:25:59 myhost kernel: [ 0.359989] pci 0000:00:09.0: PCI bridge to [bus 02-02]
    Mar 12 10:25:59 myhost kernel: [ 0.360030] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
    Mar 12 10:25:59 myhost kernel: [ 0.360061] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
    Mar 12 10:25:59 myhost kernel: [ 0.360429] pci0000:00: Requesting ACPI _OSC control (0x1d)
    Mar 12 10:25:59 myhost kernel: [ 0.360569] pci0000:00: ACPI _OSC control (0x1d) granted
    Mar 12 10:25:59 myhost kernel: [ 0.365142] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365238] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
    Mar 12 10:25:59 myhost kernel: [ 0.365330] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365424] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365515] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365606] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365697] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.365788] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
    Mar 12 10:25:59 myhost kernel: [ 0.365882] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
    Mar 12 10:25:59 myhost kernel: [ 0.365973] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
    Mar 12 10:25:59 myhost kernel: [ 0.366073] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
    Mar 12 10:25:59 myhost kernel: [ 0.366165] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
    Mar 12 10:25:59 myhost kernel: [ 0.366256] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.366346] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
    Mar 12 10:25:59 myhost kernel: [ 0.366437] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
    Mar 12 10:25:59 myhost kernel: [ 0.366528] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
    Mar 12 10:25:59 myhost kernel: [ 0.366618] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
    Mar 12 10:25:59 myhost kernel: [ 0.366728] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
    Mar 12 10:25:59 myhost kernel: [ 0.366818] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
    Mar 12 10:25:59 myhost kernel: [ 0.366818] vgaarb: loaded
    Mar 12 10:25:59 myhost kernel: [ 0.366818] vgaarb: bridge control possible 0000:02:00.0
    Mar 12 10:25:59 myhost kernel: [ 0.366818] PCI: Using ACPI for IRQ routing
    Mar 12 10:25:59 myhost kernel: [ 0.374202] pci 0000:00:01.3: no compatible bridge window for [mem 0xfec80000-0xfecfffff]
    Mar 12 10:25:59 myhost kernel: [ 0.374361] NetLabel: Initializing
    Mar 12 10:25:59 myhost kernel: [ 0.374363] NetLabel: domain hash size = 128
    Mar 12 10:25:59 myhost kernel: [ 0.374365] NetLabel: protocols = UNLABELED CIPSOv4
    Mar 12 10:25:59 myhost kernel: [ 0.374382] NetLabel: unlabeled traffic allowed by default
    Mar 12 10:25:59 myhost kernel: [ 0.381236] pnp: PnP ACPI init
    Mar 12 10:25:59 myhost kernel: [ 0.381259] ACPI: bus type pnp registered
    Mar 12 10:25:59 myhost kernel: [ 0.382933] system 00:07: [io 0x04d0-0x04d1] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382939] system 00:07: [io 0x0800-0x080f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382942] system 00:07: [io 0x4000-0x407f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382945] system 00:07: [io 0x4080-0x40ff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382948] system 00:07: [io 0x4400-0x447f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382950] system 00:07: [io 0x4480-0x44ff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382953] system 00:07: [io 0x4800-0x487f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382955] system 00:07: [io 0x4880-0x48ff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382958] system 00:07: [io 0x4c00-0x4c7f] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382960] system 00:07: [io 0x4c80-0x4cff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382964] system 00:07: [mem 0x000d0000-0x000d3fff window] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382966] system 00:07: [mem 0x000d4000-0x000d7fff window] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382969] system 00:07: [mem 0x000de000-0x000dffff window] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382973] system 00:07: [mem 0xfec80000-0x1fd93ffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382975] system 00:07: [mem 0xfefe0000-0xfefe01ff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382978] system 00:07: [mem 0xfefe1000-0xfefe1fff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382981] system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.382984] system 00:07: [mem 0xffb80000-0xffffffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383127] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383130] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383413] system 00:0b: [io 0x0a00-0x0adf] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383416] system 00:0b: [io 0x0ae0-0x0aef] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383507] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383708] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383710] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383713] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383716] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383719] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
    Mar 12 10:25:59 myhost kernel: [ 0.383953] pnp: PnP ACPI: found 14 devices
    Mar 12 10:25:59 myhost kernel: [ 0.383955] ACPI: ACPI bus type pnp unregistered
    Mar 12 10:25:59 myhost kernel: [ 0.390613] Switching to clocksource acpi_pm
    Mar 12 10:25:59 myhost kernel: [ 0.390674] pci 0000:00:01.3: BAR 0: assigned [mem 0xd0000000-0xd007ffff]
    Mar 12 10:25:59 myhost kernel: [ 0.390679] pci 0000:00:01.3: BAR 0: set to [mem 0xd0000000-0xd007ffff] (PCI address [0xd0000000-0xd007ffff])
    Mar 12 10:25:59 myhost kernel: [ 0.390683] pci 0000:00:04.0: PCI bridge to [bus 01-01]
    Mar 12 10:25:59 myhost kernel: [ 0.390691] pci 0000:00:09.0: PCI bridge to [bus 02-02]
    Mar 12 10:25:59 myhost kernel: [ 0.390694] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
    Mar 12 10:25:59 myhost kernel: [ 0.390698] pci 0000:00:09.0: bridge window [mem 0xdc000000-0xdfffffff]
    Mar 12 10:25:59 myhost kernel: [ 0.390702] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    Mar 12 10:25:59 myhost kernel: [ 0.390706] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
    Mar 12 10:25:59 myhost kernel: [ 0.390712] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
    Mar 12 10:25:59 myhost kernel: [ 0.390824] NET: Registered protocol family 2
    Mar 12 10:25:59 myhost kernel: [ 0.391013] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.392601] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.395867] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.396352] TCP: Hash tables configured (established 524288 bind 65536)
    Mar 12 10:25:59 myhost kernel: [ 0.396355] TCP reno registered
    Mar 12 10:25:59 myhost kernel: [ 0.396368] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.396419] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.396554] NET: Registered protocol family 1
    Mar 12 10:25:59 myhost kernel: [ 0.460124] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460179] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460246] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460312] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460377] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460449] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460526] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460609] pci 0000:00:00.0: Found enabled HT MSI Mapping
    Mar 12 10:25:59 myhost kernel: [ 0.460711] Unpacking initramfs...
    Mar 12 10:25:59 myhost kernel: [ 0.572196] Freeing initrd memory: 10584k freed
    Mar 12 10:25:59 myhost kernel: [ 0.577900] PCI-DMA: Disabling AGP.
    Mar 12 10:25:59 myhost kernel: [ 0.581545] PCI-DMA: aperture base @ b4000000 size 65536 KB
    Mar 12 10:25:59 myhost kernel: [ 0.581547] PCI-DMA: using GART IOMMU.
    Mar 12 10:25:59 myhost kernel: [ 0.581551] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    Mar 12 10:25:59 myhost kernel: [ 0.585462] IBS: LVT offset 1 assigned
    Mar 12 10:25:59 myhost kernel: [ 0.585486] perf: AMD IBS detected (0x00000007)
    Mar 12 10:25:59 myhost kernel: [ 0.585671] audit: initializing netlink socket (disabled)
    Mar 12 10:25:59 myhost kernel: [ 0.585695] type=2000 audit(1331547952.583:1): initialized
    Mar 12 10:25:59 myhost kernel: [ 0.598511] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Mar 12 10:25:59 myhost kernel: [ 0.625385] VFS: Disk quotas dquot_6.5.2
    Mar 12 10:25:59 myhost kernel: [ 0.625456] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Mar 12 10:25:59 myhost kernel: [ 0.625563] msgmni has been set to 7911
    Mar 12 10:25:59 myhost kernel: [ 0.625796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    Mar 12 10:25:59 myhost kernel: [ 0.625843] io scheduler noop registered
    Mar 12 10:25:59 myhost kernel: [ 0.625845] io scheduler deadline registered
    Mar 12 10:25:59 myhost kernel: [ 0.625880] io scheduler cfq registered (default)
    Mar 12 10:25:59 myhost kernel: [ 0.626497] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
    Mar 12 10:25:59 myhost kernel: [ 0.626501] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    Mar 12 10:25:59 myhost kernel: [ 0.626523] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
    Mar 12 10:25:59 myhost kernel: [ 0.626541] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
    Mar 12 10:25:59 myhost kernel: [ 0.626710] ERST: Table is not found!
    Mar 12 10:25:59 myhost kernel: [ 0.626712] GHES: HEST is not enabled!
    Mar 12 10:25:59 myhost kernel: [ 0.626780] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Mar 12 10:25:59 myhost kernel: [ 0.647333] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Mar 12 10:25:59 myhost kernel: [ 0.883974] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Mar 12 10:25:59 myhost kernel: [ 0.943516] Linux agpgart interface v0.103
    Mar 12 10:25:59 myhost kernel: [ 0.943585] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    Mar 12 10:25:59 myhost kernel: [ 0.945853] serio: i8042 KBD port at 0x60,0x64 irq 1
    Mar 12 10:25:59 myhost kernel: [ 0.945870] serio: i8042 AUX port at 0x60,0x64 irq 12
    Mar 12 10:25:59 myhost kernel: [ 0.946084] mousedev: PS/2 mouse device common for all mice
    Mar 12 10:25:59 myhost kernel: [ 0.946138] rtc_cmos 00:02: RTC can wake from S4
    Mar 12 10:25:59 myhost kernel: [ 0.946297] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    Mar 12 10:25:59 myhost kernel: [ 0.946334] rtc0: alarms up to one year, y3k, 114 bytes nvram
    Mar 12 10:25:59 myhost kernel: [ 0.946347] cpuidle: using governor ladder
    Mar 12 10:25:59 myhost kernel: [ 0.946350] cpuidle: using governor menu
    Mar 12 10:25:59 myhost kernel: [ 0.946589] TCP cubic registered
    Mar 12 10:25:59 myhost kernel: [ 0.946729] NET: Registered protocol family 10
    Mar 12 10:25:59 myhost kernel: [ 0.947209] NET: Registered protocol family 17
    Mar 12 10:25:59 myhost kernel: [ 0.947213] Registering the dns_resolver key type
    Mar 12 10:25:59 myhost kernel: [ 0.947383] registered taskstats version 1
    Mar 12 10:25:59 myhost kernel: [ 0.960176] rtc_cmos 00:02: setting system clock to 2012-03-12 10:25:53 UTC (1331547953)
    Mar 12 10:25:59 myhost kernel: [ 0.960226] Initializing network drop monitor service
    Mar 12 10:25:59 myhost kernel: [ 0.961665] Freeing unused kernel memory: 736k freed
    Mar 12 10:25:59 myhost kernel: [ 0.961941] Write protecting the kernel read-only data: 8192k
    Mar 12 10:25:59 myhost kernel: [ 0.964578] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Mar 12 10:25:59 myhost kernel: [ 0.968163] Freeing unused kernel memory: 1636k freed
    Mar 12 10:25:59 myhost kernel: [ 0.971309] Freeing unused kernel memory: 660k freed
    Mar 12 10:25:59 myhost [ 0.983845] udevd[66]: starting version 181
    Mar 12 10:25:59 myhost kernel: [ 1.019251] usbcore: registered new interface driver usbfs
    Mar 12 10:25:59 myhost kernel: [ 1.019287] usbcore: registered new interface driver hub
    Mar 12 10:25:59 myhost kernel: [ 1.019363] usbcore: registered new device driver usb
    Mar 12 10:25:59 myhost kernel: [ 1.020457] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Mar 12 10:25:59 myhost kernel: [ 1.022334] SCSI subsystem initialized
    Mar 12 10:25:59 myhost kernel: [ 1.024094] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
    Mar 12 10:25:59 myhost kernel: [ 1.024122] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
    Mar 12 10:25:59 myhost kernel: [ 1.024181] ehci_hcd 0000:00:02.1: EHCI Host Controller
    Mar 12 10:25:59 myhost kernel: [ 1.024230] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    Mar 12 10:25:59 myhost kernel: [ 1.024274] ehci_hcd 0000:00:02.1: debug port 1
    Mar 12 10:25:59 myhost kernel: [ 1.024314] ehci_hcd 0000:00:02.1: irq 23, io mem 0xdbf7ec00
    Mar 12 10:25:59 myhost kernel: [ 1.033384] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
    Mar 12 10:25:59 myhost kernel: [ 1.033711] hub 1-0:1.0: USB hub found
    Mar 12 10:25:59 myhost kernel: [ 1.033717] hub 1-0:1.0: 10 ports detected
    Mar 12 10:25:59 myhost kernel: [ 1.034730] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Mar 12 10:25:59 myhost kernel: [ 1.036435] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
    Mar 12 10:25:59 myhost kernel: [ 1.036458] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
    Mar 12 10:25:59 myhost kernel: [ 1.036513] ohci_hcd 0000:00:02.0: OHCI Host Controller
    Mar 12 10:25:59 myhost kernel: [ 1.036536] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    Mar 12 10:25:59 myhost kernel: [ 1.036579] ohci_hcd 0000:00:02.0: irq 22, io mem 0xdbf7f000
    Mar 12 10:25:59 myhost kernel: [ 1.088876] hub 2-0:1.0: USB hub found
    Mar 12 10:25:59 myhost kernel: [ 1.088885] hub 2-0:1.0: 10 ports detected
    Mar 12 10:25:59 myhost kernel: [ 1.090175] scsi0 : pata_amd
    Mar 12 10:25:59 myhost kernel: [ 1.090309] scsi1 : pata_amd
    Mar 12 10:25:59 myhost kernel: [ 1.091064] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfff0 irq 14
    Mar 12 10:25:59 myhost kernel: [ 1.091067] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfff8 irq 15
    Mar 12 10:25:59 myhost kernel: [ 1.094698] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
    Mar 12 10:25:59 myhost kernel: [ 1.094721] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
    Mar 12 10:25:59 myhost kernel: [ 1.095105] scsi2 : sata_nv
    Mar 12 10:25:59 myhost kernel: [ 1.095190] scsi3 : sata_nv
    Mar 12 10:25:59 myhost kernel: [ 1.095306] ata3: SATA max UDMA/133 cmd 0xdd80 ctl 0xdd00 bmdma 0xdb00 irq 21
    Mar 12 10:25:59 myhost kernel: [ 1.095309] ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xdb80 bmdma 0xdb08 irq 21
    Mar 12 10:25:59 myhost kernel: [ 1.095559] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
    Mar 12 10:25:59 myhost kernel: [ 1.095574] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
    Mar 12 10:25:59 myhost kernel: [ 1.095843] scsi4 : sata_nv
    Mar 12 10:25:59 myhost kernel: [ 1.095923] scsi5 : sata_nv
    Mar 12 10:25:59 myhost kernel: [ 1.096025] ata5: SATA max UDMA/133 cmd 0xda80 ctl 0xda00 bmdma 0xd880 irq 20
    Mar 12 10:25:59 myhost kernel: [ 1.096028] ata6: SATA max UDMA/133 cmd 0xd980 ctl 0xd900 bmdma 0xd888 irq 20
    Mar 12 10:25:59 myhost kernel: [ 1.417172] ata5: SATA link down (SStatus 0 SControl 300)
    Mar 12 10:25:59 myhost kernel: [ 1.560059] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Mar 12 10:25:59 myhost kernel: [ 1.566979] ata3.00: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
    Mar 12 10:25:59 myhost kernel: [ 1.566983] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Mar 12 10:25:59 myhost kernel: [ 1.573620] ata3.00: configured for UDMA/133
    Mar 12 10:25:59 myhost kernel: [ 1.573817] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
    Mar 12 10:25:59 myhost kernel: [ 1.586714] Refined TSC clocksource calibration: 2109.721 MHz.
    Mar 12 10:25:59 myhost kernel: [ 1.586720] Switching to clocksource tsc
    Mar 12 10:25:59 myhost kernel: [ 2.040045] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Mar 12 10:25:59 myhost kernel: [ 2.046813] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
    Mar 12 10:25:59 myhost kernel: [ 2.060169] ata4.00: configured for UDMA/100
    Mar 12 10:25:59 myhost kernel: [ 2.068605] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS70 EX00 PQ: 0 ANSI: 5
    Mar 12 10:25:59 myhost kernel: [ 2.390479] ata6: SATA link down (SStatus 0 SControl 300)
    Mar 12 10:25:59 myhost kernel: [ 2.397239] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    Mar 12 10:25:59 myhost kernel: [ 2.397316] sd 2:0:0:0: [sda] Write Protect is off
    Mar 12 10:25:59 myhost kernel: [ 2.397338] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Mar 12 10:25:59 myhost kernel: [ 2.413212] sda: sda1 sda2 sda3 sda4
    Mar 12 10:25:59 myhost kernel: [ 2.413653] sd 2:0:0:0: [sda] Attached SCSI disk
    Mar 12 10:25:59 myhost kernel: [ 2.423220] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Mar 12 10:25:59 myhost kernel: [ 2.423226] cdrom: Uniform CD-ROM driver Revision: 3.20
    Mar 12 10:25:59 myhost kernel: [ 2.818552] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
    Mar 12 10:25:59 myhost kernel: [ 2.818556] EXT4-fs (sda3): write access will be enabled during recovery
    Mar 12 10:25:59 myhost kernel: [ 2.844947] EXT4-fs (sda3): recovery complete
    Mar 12 10:25:59 myhost kernel: [ 2.845244] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    Mar 12 10:25:59 myhost [ 4.125862] udevd[177]: starting version 181
    Mar 12 10:25:59 myhost kernel: [ 5.513480] EXT4-fs (sda3): re-mounted. Opts: (null)
    Mar 12 10:25:59 myhost kernel: [ 5.619429] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
    Mar 12 10:26:01 myhost ntpd[546]: ntpd [email protected] Thu Mar 1 21:32:56 UTC 2012 (1)
    Mar 12 10:26:01 myhost ntpd[547]: proto: precision = 0.115 usec
    Mar 12 10:26:01 myhost ntpd[547]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
    Mar 12 10:26:01 myhost ntpd[547]: Listen and drop on 1 v6wildcard :: UDP 123
    Mar 12 10:26:01 myhost ntpd[547]: Listen normally on 2 lo 127.0.0.1 UDP 123
    Mar 12 10:26:01 myhost ntpd[547]: Listen normally on 3 lo ::1 UDP 123
    Mar 12 10:26:01 myhost ntpd[547]: peers refreshed
    Mar 12 10:26:01 myhost ntpd[547]: Listening on routing socket on fd #20 for interface updates
    Mar 12 10:26:02 myhost kernel: [ 9.760264] mtrr: base(0xdd000000) is not aligned on a size(0xe00000) boundary
    Mar 12 10:26:57 myhost dbus[419]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Initializing cgroup subsys cpu
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-provided physical RAM map:
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] NX (Execute Disable) protection: active
    Mar 12 12:41:56 myhost kernel: [ 0.000000] DMI present.
    Mar 12 12:41:56 myhost kernel: [ 0.000000] No AGP bridge found
    Mar 12 12:41:56 myhost kernel: [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Mar 12 12:41:56 myhost kernel: [ 0.000000] last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Using GB pages for direct mapping
    Mar 12 12:41:56 myhost kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffc0000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] RAMDISK: 37d6c000 - 37ff0000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: RSDP 00000000000fa1f0 00014 (v00 ACPIAM)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: RSDT 00000000bffc0000 00038 (v01 021709 RSDT1317 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: FACP 00000000bffc0200 00084 (v01 021709 FACP1317 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: DSDT 00000000bffc04a0 04880 (v01 1ADKR 1ADKR017 00000017 INTL 20051117)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: FACS 00000000bffce000 00040
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: APIC 00000000bffc0390 00080 (v01 021709 APIC1317 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: MCFG 00000000bffc0410 0003C (v01 021709 OEMMCFG 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: WDRT 00000000bffc0450 00047 (v01 021709 NV-WDRT 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: OEMB 00000000bffce040 00071 (v01 021709 OEMB1317 20090217 MSFT 00000097)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24
    Mar 12 12:41:56 myhost kernel: [ 0.000000] No NUMA configuration found
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Faking a node at 0000000000000000-0000000140000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Zone PFN ranges:
    Mar 12 12:41:56 myhost kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Normal 0x00100000 -> 0x00140000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Movable zone start PFN for each node
    Mar 12 12:41:56 myhost kernel: [ 0.000000] early_node_map[3] active PFN ranges
    Mar 12 12:41:56 myhost kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
    Mar 12 12:41:56 myhost kernel: [ 0.000000] 0: 0x00000100 -> 0x000bffc0
    Mar 12 12:41:56 myhost kernel: [ 0.000000] 0: 0x00100000 -> 0x00140000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
    Mar 12 12:41:56 myhost kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_override
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
    Mar 12 12:41:56 myhost kernel: [ 0.000000] IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    Mar 12 12:41:56 myhost kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
    Mar 12 12:41:56 myhost kernel: [ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000bffce000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bffce000 - 00000000bfff0000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfffe000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfffe000 - 00000000fec00000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    Mar 12 12:41:56 myhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
    Mar 12 12

  • IMac wont recognise keyboard and mouse

    Hi
    I have a strange problem.
    When I am trying to start the computer, Leopard does not recognise my keyboard and mouse.
    When i press the power button on the machine the optical light on the keyboard comes on, however as soon as the apple logo appears it goes off. The machine boots to the log in screen, however I cannot log in. If I move the mouse to a different port, the light comes back on, however still does not work.
    What is really strange is if I boot in bootcamp, the keyboard and mouse work fine.
    Both keyboard and mouse are connected directly to the machine.
    Any ideas?

    I have the same problem and the same Imac.
    Really i don't no what to do.

  • Help! My Keyboard and mouse will not work all of a sudden on my G4

    I am having a problem with both my keyboard and mouse. I have a graphite G4 and recently had to run disk warrior on i. I have had endless problems with this computer and even have a 2nd hardrive on it since it only came with a 10Gig. Needless to say it is all I have right now. I am running os x 10.2.2 on it and a few days after I recessitated it with disk warrior my keyboard and mouse suddenly went dead while I was on the internet. I tried pluging the two into different usb ports both on the tower and also into the flat panel mac display that it came with and nothing. I plugged in my wacom tablet and that works. i then tested the mouse and keyboard on my husband's dell laptop and they work. I cannot reset the PRAM b/c the keyboard won't work! What do I do??????

    Besides removing the battery, you can do a PMU reset which will zap PRAM. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
    You only describe your Mac as a G4 graphite, which I believe is a G4 AGP. Here’s a diagram showing the location of the PMU reset button.
    G4 AGP Graphics (Sawtooth)/Gigabit Ethernet
    http://img96.imageshack.us/img96/5706/sawtoothlogicbd2yu.jpg
    Look at these links to determine which model G4 you have.
    Power Mac G4: How to Differentiate Between Models
    http://docs.info.apple.com/article.html?artnum=58418
    Power Mac G4: How to Differentiate Between Models (Part 2)
    http://docs.info.apple.com/article.html?artnum=42739
     Cheers, Tom
    Also look at this link.
    Common fixes for USB device issues (unrecognized, etc.)
    http://www.macfixit.com/article.php?story=20070824012114701
    Message was edited by: Texas Mac Man

  • Using Photoshop CC 2014 on a Windows Tablet without a keyboard and mouse

    Using Photoshop CC 2014 on a Windows Tablet without a keyboard and mouse can be quite a challenge. Even if you use the experimental 2x UI. You can not use your fingers or to quickly change tools and change settings. You have no shortcut without popping up Windows touch keyboard or leave it up taking a great deal of screen space.  If you're using the 2x UI Photoshop uses the screen at half resolution so it displays 1/4 the amount of pixels it could.
    Fortunately I found a little touchkey utility on the web the lets you design your own touch keyboards. The can be transparent and you can even paint under them as long as you start the stroke  outside the keyboard area. The keyboards can be toggles on and off so you can actually use Photoshop.  The utility is small and requires not installation can be run form anywhere.  I purchased a Surface Pro 3 a week ago.  Its a full fledge PC.  Through the home group I can access all machines in my house and using network shares I can access all files on my machines and the network drive on my router,  I can print on my Epson 4800 printer. I can show slideshow on my HDTV via   Bluetooth using a Microsoft wireless display adapter.   I can plug in my Wacom Intuos Pro wireless receiver into the USB  3 port and use my Wacom tablet.  Have a very touchy machine.  Touch on the keyboard touch pad touch on the Display display and on the Wacom tablet.  Could have touch on a mouse but I prefer the Microsoft comfort bluetooth mouse that has six buttons and a four way wheel.
    As a tablet its under two pounds.  Its quite impressive cost why mor the an iPad but worth the cost to me for with windows I can get at the file system.   If you have a Surface Pro 3 you should check out  "Touchkey" its handy.

    Do a screen screen capture and post it here so we can see what you stating about a white layout...

Maybe you are looking for

  • XML Publisher report with multi sheet excel report

    HI Guys, I need help from you all to develop the report in xml publisher where the output should have multiple sheets in excel file can you pls guide me how to do this

  • WLS 8.1 Apache Plug-in is changing HTTP status code 999 to 500

    I'm seeing the weblogic server 8.1 sp4 apache plug-in change the HTTP status code of 999 (set by the application) to 500 Internal Server Error. I'm seeing this with Apache 2.0.48 on aix and with Apache 2.0.58 on windows. I've tried the plug-in from 8

  • Attributes are not saved in CRM using APD

    Hello experts, I have trouble recording the attributes marketing from BW to CRM. APD use to record data, the log of APD ends in green but when I go to transaction BP in CRM data are not. Anyone can help me, thanks! Enrique. Edited by: Enrique Busi on

  • I have one requirement give me any idea

    Hi all The Excel file will be executed as a background job. This will eliminate issues related to network speed, time-outs,user logging off,ect; and the need for the user to remain logged in to the transaction till it finishes execution. After the ba

  • Syncing Photos to iDevices Broken

    I recently upgraded from iPhoto to Aperture. The update process (for me) went as follows: Decided to upgrade to Aperture when I read that the libraries were (finally) compatible. Upgraded iPhoto to 9.3, and upgraded the library. Purchased Aperture, a