Strange Lagging in GNOME and KDE

Hey there!
I installed arch and Gnome (and later tried) on my desktop computer today and it worked free from lag for about one hour. Now it's behaving very strange, and I've been close to throwing my monitors out the window about 20 times.
However, I don't know what's causing the problem and therefore don't know how to fix it. I will try to describe this mysterious lagging:
Sometimes when I'm surfing the web with chromium (or using any other application so far) the windows kind of freeze. I'm unable to click anything in the window, and I can't go to the "Activities" in the top left corner. It always happens when I'm running the terminal (rxvt) and chromium at the same time. I can't change the focus of the windows by clicking on them, but I can change the focus by alt-tabbing.
Can I debug this or something, cause now it's close to unusable? (I'm quite new to arch, so please don't reply with ultra-advanced maneuvers)
Last edited by Rydberg95 (2013-07-23 19:37:35)

My graphics card is a Nvidia GTX660, but I don't think it has to do with the graphics, since it's mostly the focus of the windows that isn't functioning properly. Sometimes when I'm in a program that I have focused, I can't even click anything in it (for example i can't scroll or click links in chromium).
Here's my Xorg.0.log anyways:
[ 9.052]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 9.052] X Protocol Version 11, Revision 0
[ 9.052] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 9.052] Current Operating System: Linux hackycracky 3.9.9-1-ARCH #1 SMP PREEMPT Wed Jul 3 22:45:16 CEST 2013 x86_64
[ 9.052] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9bd81756-d741-46bd-8604-5c542ff1125e ro quiet
[ 9.052] Build Date: 01 July 2013 10:48:42AM
[ 9.052]
[ 9.052] Current version of pixman: 0.30.0
[ 9.052] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.052] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.052] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 23 11:34:00 2013
[ 9.115] (==) Using config file: "/etc/X11/xorg.conf"
[ 9.115] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 9.178] (==) ServerLayout "Layout0"
[ 9.178] (**) |-->Screen "Screen0" (0)
[ 9.178] (**) | |-->Monitor "Monitor0"
[ 9.178] (**) | |-->Device "Device0"
[ 9.178] (**) |-->Input Device "evdev keyboard catchall"
[ 9.178] (**) |-->Input Device "Evdev Mouse"
[ 9.178] (==) Automatically adding devices
[ 9.178] (==) Automatically enabling devices
[ 9.178] (==) Automatically adding GPU devices
[ 9.197] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 9.197] Entry deleted from font path.
[ 9.197] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 9.197] Entry deleted from font path.
[ 9.197] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 9.197] Entry deleted from font path.
[ 9.197] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 9.197] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 9.197] Entry deleted from font path.
[ 9.197] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 9.197] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 9.197] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 9.198] (II) Loader magic: 0x7fdc20
[ 9.198] (II) Module ABI versions:
[ 9.198] X.Org ANSI C Emulation: 0.4
[ 9.198] X.Org Video Driver: 14.1
[ 9.198] X.Org XInput driver : 19.1
[ 9.198] X.Org Server Extension : 7.0
[ 9.198] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 9.200] (--) PCI:*(0:1:0:0) 10de:11c0:1458:354e rev 161, Mem @ 0xf9000000/16777216, 0xe0000000/134217728, 0xee000000/33554432, I/O @ 0x0000af00/128, BIOS @ 0x????????/524288
[ 9.201] Initializing built-in extension Generic Event Extension
[ 9.201] Initializing built-in extension SHAPE
[ 9.201] Initializing built-in extension MIT-SHM
[ 9.201] Initializing built-in extension XInputExtension
[ 9.201] Initializing built-in extension XTEST
[ 9.201] Initializing built-in extension BIG-REQUESTS
[ 9.201] Initializing built-in extension SYNC
[ 9.201] Initializing built-in extension XKEYBOARD
[ 9.201] Initializing built-in extension XC-MISC
[ 9.201] Initializing built-in extension SECURITY
[ 9.201] Initializing built-in extension XINERAMA
[ 9.201] Initializing built-in extension XFIXES
[ 9.201] Initializing built-in extension RENDER
[ 9.201] Initializing built-in extension RANDR
[ 9.201] Initializing built-in extension COMPOSITE
[ 9.201] Initializing built-in extension DAMAGE
[ 9.201] Initializing built-in extension MIT-SCREEN-SAVER
[ 9.201] Initializing built-in extension DOUBLE-BUFFER
[ 9.201] Initializing built-in extension RECORD
[ 9.201] Initializing built-in extension DPMS
[ 9.201] Initializing built-in extension X-Resource
[ 9.201] Initializing built-in extension XVideo
[ 9.201] Initializing built-in extension XVideo-MotionCompensation
[ 9.201] Initializing built-in extension XFree86-VidModeExtension
[ 9.201] Initializing built-in extension XFree86-DGA
[ 9.201] Initializing built-in extension XFree86-DRI
[ 9.201] Initializing built-in extension DRI2
[ 9.201] (II) LoadModule: "glx"
[ 9.231] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 10.226] (II) Module glx: vendor="NVIDIA Corporation"
[ 10.226] compiled for 4.0.2, module version = 1.0.0
[ 10.226] Module class: X.Org Server Extension
[ 10.226] (II) NVIDIA GLX Module 319.32 Wed Jun 19 14:55:38 PDT 2013
[ 10.234] Loading extension GLX
[ 10.234] (II) LoadModule: "nvidia"
[ 10.234] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 10.311] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 10.311] compiled for 4.0.2, module version = 1.0.0
[ 10.311] Module class: X.Org Video Driver
[ 10.332] (II) LoadModule: "evdev"
[ 10.332] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10.343] (II) Module evdev: vendor="X.Org Foundation"
[ 10.343] compiled for 1.14.2, module version = 2.8.1
[ 10.343] Module class: X.Org XInput Driver
[ 10.343] ABI class: X.Org XInput driver, version 19.1
[ 10.343] (II) NVIDIA dlloader X Driver 319.32 Wed Jun 19 14:34:12 PDT 2013
[ 10.343] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 10.353] (++) using VT number 1
[ 10.354] (II) Loading sub module "fb"
[ 10.354] (II) LoadModule: "fb"
[ 10.362] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.379] (II) Module fb: vendor="X.Org Foundation"
[ 10.379] compiled for 1.14.2, module version = 1.0.0
[ 10.379] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.379] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 10.379] (II) Loading sub module "wfb"
[ 10.379] (II) LoadModule: "wfb"
[ 10.379] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 10.386] (II) Module wfb: vendor="X.Org Foundation"
[ 10.386] compiled for 1.14.2, module version = 1.0.0
[ 10.386] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.386] (II) Loading sub module "shadow"
[ 10.386] (II) LoadModule: "shadow"
[ 10.386] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 10.387] (II) Module shadow: vendor="X.Org Foundation"
[ 10.387] compiled for 1.14.2, module version = 1.1.0
[ 10.387] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.387] (II) Loading sub module "ramdac"
[ 10.387] (II) LoadModule: "ramdac"
[ 10.387] (II) Module "ramdac" already built-in
[ 10.395] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 10.395] (==) NVIDIA(0): RGB weight 888
[ 10.395] (==) NVIDIA(0): Default visual is TrueColor
[ 10.395] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 10.395] (**) NVIDIA(0): Enabling 2D acceleration
[ 11.004] (II) NVIDIA(GPU-0): Display (BenQ GL2450 (DFP-0)) does not support NVIDIA 3D
[ 11.004] (II) NVIDIA(GPU-0): Vision stereo.
[ 11.009] (II) NVIDIA(GPU-0): Display (BenQ G2420HDBL (DFP-3)) does not support NVIDIA 3D
[ 11.009] (II) NVIDIA(GPU-0): Vision stereo.
[ 11.011] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:1:0:0 (GPU-0)
[ 11.011] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 11.011] (--) NVIDIA(0): VideoBIOS: 80.06.28.00.66
[ 11.011] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 11.015] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660 at PCI:1:0:0
[ 11.015] (--) NVIDIA(0): CRT-0
[ 11.015] (--) NVIDIA(0): BenQ GL2450 (DFP-0) (boot, connected)
[ 11.015] (--) NVIDIA(0): DFP-1
[ 11.015] (--) NVIDIA(0): DFP-2
[ 11.015] (--) NVIDIA(0): BenQ G2420HDBL (DFP-3) (connected)
[ 11.015] (--) NVIDIA(0): DFP-4
[ 11.015] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 11.015] (--) NVIDIA(0): BenQ GL2450 (DFP-0): 330.0 MHz maximum pixel clock
[ 11.015] (--) NVIDIA(0): BenQ GL2450 (DFP-0): Internal Dual Link TMDS
[ 11.015] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 11.015] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 11.015] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
[ 11.015] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[ 11.016] (--) NVIDIA(0): BenQ G2420HDBL (DFP-3): 330.0 MHz maximum pixel clock
[ 11.016] (--) NVIDIA(0): BenQ G2420HDBL (DFP-3): Internal Dual Link TMDS
[ 11.016] (--) NVIDIA(0): DFP-4: 960.0 MHz maximum pixel clock
[ 11.016] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 11.016] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 11.016] (**) NVIDIA(0): device BenQ GL2450 (DFP-0) (Using EDID frequencies has
[ 11.016] (**) NVIDIA(0): been enabled on all display devices.)
[ 11.018] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 11.018] (**) NVIDIA(0): device BenQ G2420HDBL (DFP-3) (Using EDID frequencies has
[ 11.018] (**) NVIDIA(0): been enabled on all display devices.)
[ 11.019] (==) NVIDIA(0):
[ 11.020] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 11.020] (==) NVIDIA(0): will be used as the requested mode.
[ 11.020] (==) NVIDIA(0):
[ 11.020] (II) NVIDIA(0): Validated MetaModes:
[ 11.020] (II) NVIDIA(0): "DFP-0:nvidia-auto-select{},DFP-3:nvidia-auto-select{}"
[ 11.020] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[ 11.063] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 11.063] (--) NVIDIA(0): option
[ 11.063] (--) Depth 24 pixmap format is 32 bpp
[ 11.064] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 11.064] (II) NVIDIA: access.
[ 11.067] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 11.067] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 11.067] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 11.067] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 11.067] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 11.067] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 11.067] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 11.067] (II) NVIDIA(0): Config Options in the README.
[ 11.071] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select{},DFP-3:nvidia-auto-select{}"
[ 11.195] Loading extension NV-GLX
[ 11.267] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 11.267] (==) NVIDIA(0): Backing store disabled
[ 11.267] (==) NVIDIA(0): Silken mouse enabled
[ 11.267] (**) NVIDIA(0): DPMS enabled
[ 11.267] Loading extension NV-CONTROL
[ 11.268] Loading extension XINERAMA
[ 11.268] (II) Loading sub module "dri2"
[ 11.268] (II) LoadModule: "dri2"
[ 11.268] (II) Module "dri2" already built-in
[ 11.268] (II) NVIDIA(0): [DRI2] Setup complete
[ 11.268] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 11.268] (--) RandR disabled
[ 11.272] (II) Initializing extension GLX
[ 11.536] (II) Using input driver 'evdev' for 'evdev keyboard catchall'
[ 11.536] (**) Option "CoreKeyboard"
[ 11.536] (**) evdev keyboard catchall: always reports core events
[ 11.536] (EE) evdev: evdev keyboard catchall: No device specified.
[ 11.536] (EE) PreInit returned 2 for "evdev keyboard catchall"
[ 11.536] (II) UnloadModule: "evdev"
[ 11.536] (II) Using input driver 'evdev' for 'Evdev Mouse'
[ 11.536] (**) Option "CorePointer"
[ 11.536] (**) Evdev Mouse: always reports core events
[ 11.536] (**) evdev: Evdev Mouse: Device: "/dev/psaux"
[ 11.536] (EE) evdev: Evdev Mouse: ioctl EVIOCGBIT for bitmask in EvdevOpenMTDev failed: Inappropriate ioctl for device
[ 11.536] (EE) Evdev Mouse: Couldn't open mtdev device
[ 11.540] (EE) PreInit returned 2 for "Evdev Mouse"
[ 11.540] (II) UnloadModule: "evdev"
[ 11.541] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 11.541] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11.541] (II) Using input driver 'evdev' for 'Power Button'
[ 11.541] (**) Power Button: always reports core events
[ 11.541] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 11.542] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 11.542] (--) evdev: Power Button: Found keys
[ 11.542] (II) evdev: Power Button: Configuring as keyboard
[ 11.542] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 11.542] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 11.542] (**) Option "xkb_rules" "evdev"
[ 11.542] (**) Option "xkb_model" "pc104"
[ 11.542] (**) Option "xkb_layout" "us"
[ 11.565] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 11.565] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11.565] (II) Using input driver 'evdev' for 'Power Button'
[ 11.565] (**) Power Button: always reports core events
[ 11.565] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 11.565] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 11.565] (--) evdev: Power Button: Found keys
[ 11.565] (II) evdev: Power Button: Configuring as keyboard
[ 11.565] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 11.565] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 11.565] (**) Option "xkb_rules" "evdev"
[ 11.565] (**) Option "xkb_model" "pc104"
[ 11.565] (**) Option "xkb_layout" "us"
[ 11.566] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 11.566] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event18)
[ 11.566] (II) No input driver specified, ignoring this device.
[ 11.566] (II) This device may have been added with another device file.
[ 11.567] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event19)
[ 11.567] (II) No input driver specified, ignoring this device.
[ 11.567] (II) This device may have been added with another device file.
[ 11.567] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event20)
[ 11.567] (II) No input driver specified, ignoring this device.
[ 11.567] (II) This device may have been added with another device file.
[ 11.568] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event21)
[ 11.568] (II) No input driver specified, ignoring this device.
[ 11.568] (II) This device may have been added with another device file.
[ 11.568] (II) config/udev: Adding input device Saitek Cyborg R.A.T.3 Mouse (/dev/input/event16)
[ 11.568] (**) Saitek Cyborg R.A.T.3 Mouse: Applying InputClass "evdev pointer catchall"
[ 11.568] (II) Using input driver 'evdev' for 'Saitek Cyborg R.A.T.3 Mouse'
[ 11.568] (**) Saitek Cyborg R.A.T.3 Mouse: always reports core events
[ 11.568] (**) evdev: Saitek Cyborg R.A.T.3 Mouse: Device: "/dev/input/event16"
[ 11.568] (--) evdev: Saitek Cyborg R.A.T.3 Mouse: Vendor 0x6a3 Product 0xccc
[ 11.568] (--) evdev: Saitek Cyborg R.A.T.3 Mouse: Found 14 mouse buttons
[ 11.568] (--) evdev: Saitek Cyborg R.A.T.3 Mouse: Found scroll wheel(s)
[ 11.568] (--) evdev: Saitek Cyborg R.A.T.3 Mouse: Found relative axes
[ 11.568] (--) evdev: Saitek Cyborg R.A.T.3 Mouse: Found x and y relative axes
[ 11.568] (II) evdev: Saitek Cyborg R.A.T.3 Mouse: Configuring as mouse
[ 11.568] (II) evdev: Saitek Cyborg R.A.T.3 Mouse: Adding scrollwheel support
[ 11.568] (**) evdev: Saitek Cyborg R.A.T.3 Mouse: YAxisMapping: buttons 4 and 5
[ 11.568] (**) evdev: Saitek Cyborg R.A.T.3 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11.568] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/input/input16/event16"
[ 11.568] (II) XINPUT: Adding extended input device "Saitek Cyborg R.A.T.3 Mouse" (type: MOUSE, id 8)
[ 11.569] (II) evdev: Saitek Cyborg R.A.T.3 Mouse: initialized for relative axes.
[ 11.569] (**) Saitek Cyborg R.A.T.3 Mouse: (accel) keeping acceleration scheme 1
[ 11.569] (**) Saitek Cyborg R.A.T.3 Mouse: (accel) acceleration profile 0
[ 11.569] (**) Saitek Cyborg R.A.T.3 Mouse: (accel) acceleration factor: 2.000
[ 11.569] (**) Saitek Cyborg R.A.T.3 Mouse: (accel) acceleration threshold: 4
[ 11.569] (II) config/udev: Adding input device Saitek Cyborg R.A.T.3 Mouse (/dev/input/mouse0)
[ 11.569] (II) No input driver specified, ignoring this device.
[ 11.569] (II) This device may have been added with another device file.
[ 11.570] (II) config/udev: Adding input device Logitech Logitech G35 Headset (/dev/input/event17)
[ 11.570] (**) Logitech Logitech G35 Headset: Applying InputClass "evdev keyboard catchall"
[ 11.570] (II) Using input driver 'evdev' for 'Logitech Logitech G35 Headset'
[ 11.570] (**) Logitech Logitech G35 Headset: always reports core events
[ 11.570] (**) evdev: Logitech Logitech G35 Headset: Device: "/dev/input/event17"
[ 11.570] (--) evdev: Logitech Logitech G35 Headset: Vendor 0x46d Product 0xa15
[ 11.570] (--) evdev: Logitech Logitech G35 Headset: Found keys
[ 11.570] (II) evdev: Logitech Logitech G35 Headset: Configuring as keyboard
[ 11.570] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb3/3-2/3-2:1.3/input/input17/event17"
[ 11.570] (II) XINPUT: Adding extended input device "Logitech Logitech G35 Headset" (type: KEYBOARD, id 9)
[ 11.570] (**) Option "xkb_rules" "evdev"
[ 11.570] (**) Option "xkb_model" "pc104"
[ 11.570] (**) Option "xkb_layout" "us"
[ 11.571] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 11.571] (II) No input driver specified, ignoring this device.
[ 11.571] (II) This device may have been added with another device file.
[ 11.571] (II) config/udev: Adding input device HDA Intel MID Rear Mic (/dev/input/event10)
[ 11.571] (II) No input driver specified, ignoring this device.
[ 11.571] (II) This device may have been added with another device file.
[ 11.572] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event11)
[ 11.572] (II) No input driver specified, ignoring this device.
[ 11.572] (II) This device may have been added with another device file.
[ 11.572] (II) config/udev: Adding input device HDA Intel MID Line Out Side (/dev/input/event12)
[ 11.572] (II) No input driver specified, ignoring this device.
[ 11.572] (II) This device may have been added with another device file.
[ 11.573] (II) config/udev: Adding input device HDA Intel MID Line Out CLFE (/dev/input/event13)
[ 11.573] (II) No input driver specified, ignoring this device.
[ 11.573] (II) This device may have been added with another device file.
[ 11.573] (II) config/udev: Adding input device HDA Intel MID Line Out Surround (/dev/input/event14)
[ 11.573] (II) No input driver specified, ignoring this device.
[ 11.573] (II) This device may have been added with another device file.
[ 11.574] (II) config/udev: Adding input device HDA Intel MID Line Out Front (/dev/input/event15)
[ 11.574] (II) No input driver specified, ignoring this device.
[ 11.574] (II) This device may have been added with another device file.
[ 11.574] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event8)
[ 11.574] (II) No input driver specified, ignoring this device.
[ 11.574] (II) This device may have been added with another device file.
[ 11.574] (II) config/udev: Adding input device HDA Intel MID Front Mic (/dev/input/event9)
[ 11.574] (II) No input driver specified, ignoring this device.
[ 11.574] (II) This device may have been added with another device file.
[ 11.575] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (XBOX) (/dev/input/event2)
[ 11.575] (II) No input driver specified, ignoring this device.
[ 11.575] (II) This device may have been added with another device file.
[ 11.575] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (XBOX) (/dev/input/js0)
[ 11.575] (II) No input driver specified, ignoring this device.
[ 11.575] (II) This device may have been added with another device file.
[ 11.576] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (XBOX) (/dev/input/event3)
[ 11.576] (II) No input driver specified, ignoring this device.
[ 11.576] (II) This device may have been added with another device file.
[ 11.576] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (XBOX) (/dev/input/js1)
[ 11.576] (II) No input driver specified, ignoring this device.
[ 11.576] (II) This device may have been added with another device file.
[ 11.577] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (XBOX) (/dev/input/event4)
[ 11.577] (II) No input driver specified, ignoring this device.
[ 11.577] (II) This device may have been added with another device file.
[ 11.577] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (XBOX) (/dev/input/js2)
[ 11.577] (II) No input driver specified, ignoring this device.
[ 11.577] (II) This device may have been added with another device file.
[ 11.577] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (XBOX) (/dev/input/event5)
[ 11.577] (II) No input driver specified, ignoring this device.
[ 11.577] (II) This device may have been added with another device file.
[ 11.577] (II) config/udev: Adding input device Xbox 360 Wireless Receiver (XBOX) (/dev/input/js3)
[ 11.577] (II) No input driver specified, ignoring this device.
[ 11.577] (II) This device may have been added with another device file.
[ 11.577] (II) config/udev: Adding input device Gaming Keyboard (/dev/input/event22)
[ 11.577] (**) Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[ 11.577] (II) Using input driver 'evdev' for 'Gaming Keyboard'
[ 11.577] (**) Gaming Keyboard: always reports core events
[ 11.577] (**) evdev: Gaming Keyboard: Device: "/dev/input/event22"
[ 11.577] (--) evdev: Gaming Keyboard: Vendor 0x46d Product 0xc221
[ 11.577] (--) evdev: Gaming Keyboard: Found keys
[ 11.577] (II) evdev: Gaming Keyboard: Configuring as keyboard
[ 11.577] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.0/input/input22/event22"
[ 11.577] (II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD, id 10)
[ 11.577] (**) Option "xkb_rules" "evdev"
[ 11.577] (**) Option "xkb_model" "pc104"
[ 11.577] (**) Option "xkb_layout" "us"
[ 11.578] (II) config/udev: Adding input device Gaming Keyboard (/dev/input/event23)
[ 11.578] (**) Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[ 11.578] (II) Using input driver 'evdev' for 'Gaming Keyboard'
[ 11.578] (**) Gaming Keyboard: always reports core events
[ 11.578] (**) evdev: Gaming Keyboard: Device: "/dev/input/event23"
[ 11.578] (--) evdev: Gaming Keyboard: Vendor 0x46d Product 0xc221
[ 11.578] (--) evdev: Gaming Keyboard: Found keys
[ 11.578] (II) evdev: Gaming Keyboard: Configuring as keyboard
[ 11.578] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.1/input/input23/event23"
[ 11.578] (II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD, id 11)
[ 11.578] (**) Option "xkb_rules" "evdev"
[ 11.578] (**) Option "xkb_model" "pc104"
[ 11.578] (**) Option "xkb_layout" "us"
[ 11.578] (II) config/udev: Adding input device G11 Keyboard (/dev/input/event24)
[ 11.578] (**) G11 Keyboard: Applying InputClass "evdev keyboard catchall"
[ 11.578] (II) Using input driver 'evdev' for 'G11 Keyboard'
[ 11.578] (**) G11 Keyboard: always reports core events
[ 11.578] (**) evdev: G11 Keyboard: Device: "/dev/input/event24"
[ 11.578] (--) evdev: G11 Keyboard: Vendor 0x46d Product 0xc225
[ 11.578] (--) evdev: G11 Keyboard: Found keys
[ 11.578] (II) evdev: G11 Keyboard: Configuring as keyboard
[ 11.578] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.4/8-2.4:1.0/input/input24/event24"
[ 11.578] (II) XINPUT: Adding extended input device "G11 Keyboard" (type: KEYBOARD, id 12)
[ 11.578] (**) Option "xkb_rules" "evdev"
[ 11.578] (**) Option "xkb_model" "pc104"
[ 11.578] (**) Option "xkb_layout" "us"
[ 11.579] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 11.579] (II) No input driver specified, ignoring this device.
[ 11.579] (II) This device may have been added with another device file.
[ 13.569] (II) NVIDIA(GPU-0): Display (BenQ GL2450 (DFP-0)) does not support NVIDIA 3D
[ 13.569] (II) NVIDIA(GPU-0): Vision stereo.
[ 13.569] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13.569] (**) NVIDIA(0): device BenQ GL2450 (DFP-0) (Using EDID frequencies has
[ 13.569] (**) NVIDIA(0): been enabled on all display devices.)
[ 13.575] (II) NVIDIA(GPU-0): Display (BenQ G2420HDBL (DFP-3)) does not support NVIDIA 3D
[ 13.575] (II) NVIDIA(GPU-0): Vision stereo.
[ 13.575] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13.575] (**) NVIDIA(0): device BenQ G2420HDBL (DFP-3) (Using EDID frequencies has
[ 13.575] (**) NVIDIA(0): been enabled on all display devices.)
[ 16.080] (II) NVIDIA(GPU-0): Display (BenQ GL2450 (DFP-0)) does not support NVIDIA 3D
[ 16.080] (II) NVIDIA(GPU-0): Vision stereo.
[ 16.080] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 16.080] (**) NVIDIA(0): device BenQ GL2450 (DFP-0) (Using EDID frequencies has
[ 16.080] (**) NVIDIA(0): been enabled on all display devices.)
[ 16.086] (II) NVIDIA(GPU-0): Display (BenQ G2420HDBL (DFP-3)) does not support NVIDIA 3D
[ 16.086] (II) NVIDIA(GPU-0): Vision stereo.
[ 16.087] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 16.087] (**) NVIDIA(0): device BenQ G2420HDBL (DFP-3) (Using EDID frequencies has
[ 16.087] (**) NVIDIA(0): been enabled on all display devices.)
[ 16.110] (II) NVIDIA(GPU-0): Display (BenQ GL2450 (DFP-0)) does not support NVIDIA 3D
[ 16.110] (II) NVIDIA(GPU-0): Vision stereo.
[ 16.110] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 16.110] (**) NVIDIA(0): device BenQ GL2450 (DFP-0) (Using EDID frequencies has
[ 16.110] (**) NVIDIA(0): been enabled on all display devices.)
[ 16.116] (II) NVIDIA(GPU-0): Display (BenQ G2420HDBL (DFP-3)) does not support NVIDIA 3D
[ 16.116] (II) NVIDIA(GPU-0): Vision stereo.
[ 16.116] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 16.116] (**) NVIDIA(0): device BenQ G2420HDBL (DFP-3) (Using EDID frequencies has
[ 16.116] (**) NVIDIA(0): been enabled on all display devices.)
[ 32.186] (II) NVIDIA(GPU-0): Display (BenQ GL2450 (DFP-0)) does not support NVIDIA 3D
[ 32.186] (II) NVIDIA(GPU-0): Vision stereo.
[ 32.186] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 32.186] (**) NVIDIA(0): device BenQ GL2450 (DFP-0) (Using EDID frequencies has
[ 32.186] (**) NVIDIA(0): been enabled on all display devices.)
[ 32.192] (II) NVIDIA(GPU-0): Display (BenQ G2420HDBL (DFP-3)) does not support NVIDIA 3D
[ 32.192] (II) NVIDIA(GPU-0): Vision stereo.
[ 32.192] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 32.192] (**) NVIDIA(0): device BenQ G2420HDBL (DFP-3) (Using EDID frequencies has
[ 32.192] (**) NVIDIA(0): been enabled on all display devices.)
[ 32.596] (II) NVIDIA(GPU-0): Display (BenQ GL2450 (DFP-0)) does not support NVIDIA 3D
[ 32.596] (II) NVIDIA(GPU-0): Vision stereo.
[ 32.596] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 32.596] (**) NVIDIA(0): device BenQ GL2450 (DFP-0) (Using EDID frequencies has
[ 32.596] (**) NVIDIA(0): been enabled on all display devices.)
[ 32.603] (II) NVIDIA(GPU-0): Display (BenQ G2420HDBL (DFP-3)) does not support NVIDIA 3D
[ 32.603] (II) NVIDIA(GPU-0): Vision stereo.
[ 32.603] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 32.603] (**) NVIDIA(0): device BenQ G2420HDBL (DFP-3) (Using EDID frequencies has
[ 32.603] (**) NVIDIA(0): been enabled on all display devices.)
[ 33.616] (II) NVIDIA(GPU-0): Display (BenQ GL2450 (DFP-0)) does not support NVIDIA 3D
[ 33.616] (II) NVIDIA(GPU-0): Vision stereo.
[ 33.616] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 33.616] (**) NVIDIA(0): device BenQ GL2450 (DFP-0) (Using EDID frequencies has
[ 33.616] (**) NVIDIA(0): been enabled on all display devices.)
[ 33.622] (II) NVIDIA(GPU-0): Display (BenQ G2420HDBL (DFP-3)) does not support NVIDIA 3D
[ 33.622] (II) NVIDIA(GPU-0): Vision stereo.
[ 33.622] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 33.622] (**) NVIDIA(0): device BenQ G2420HDBL (DFP-3) (Using EDID frequencies has
[ 33.622] (**) NVIDIA(0): been enabled on all display devices.)
From what I understand it only shows a few errors for the mouse/keyboard, and that's because I changed the driver yesterday.

Similar Messages

  • I don't want all those GNOME and KDE libs on my system!

    Kde Libraries/Base/Bindings - 80 megs
    Full KDE - 200 megs
    Full GNOME - 80 megs
    Base Gnome - 55 megs
    I hear so many people saying "Ew, it's using gnome-libs  I don't wanna install that"  I have said this many times.  It's seemed like a lot of usage on my hard drive with all those packages...  In reality, 50 megs for GNOME libs or 80 megs for KDE isn't a lot at all.. Heck, UT2004 is around 90 times bigger than installing base KDE and GNOME libs.  Thanks to modern technology, most PCs have 80 - 120 gigs on them..  Even with this 30 gig hard drive,  150 megs does not even put a dent.  Unless your using a floppy for your hard drive, it won't hurt to install gnome and kde libaries.  You need a gig and a half for just winblows stuff!  Just because it says:
    Targets: hal-0.2.97-2 libgsf-1.9.1-1 gnome-desktop-2.8.0-1 nautilus-2.8.1-1
    nautilus-cd-burner-2.8.1-1 libdvdcss-1.2.8-1 libdvdread-0.9.4-2
    libdvdnav-0.1.9-2 faac-1.24-1 faad2-2.0-5 hermes-1.3.3-1
    libmikmod-3.1.11-1 gtk-1.2.10-4 mjpegtools-1.6.2-1 gst-plugins-0.8.5-1
    totem-0.99.19-2
    Total Package Size: 11.5 MB
    Proceed with upgrade? [Y/n]
    It seems like a lot of depedencies, being on four lines and all... But it's really not that much.  I won't hurt to have it on your PC.
    Just my .2 for the day 

    xerxes2 wrote:
    kth5 wrote:hmm, i have exactly the same scenario on my laptop. it's only a Celeron 700  + 256MB ram. i run kde, mozilla thunderbird, several konsole session, xchat2, xmms plus some more konqueror session w/o any problem. only thing that is lagging behind is my GFX card which needs a share of the system memory. anway, my system in KDE w/ all these apps up needs only ~120MB the rest is filled up w/ diskcache or whatever. it's not bad for a desktop system that is not supposed to render 3D or viewing 100MB+ large files from memory. 
    I'm impressed!
    I havn't tried kde since 3.2.0 and it was totally unusuable due to bugs, crashes, bloat and so forth,
    the kde devs must been busy since then... 
    I was even quite impressed with KDE 3.3.x.  I use KDM for my default DM all the time.. GDM is too buggy..  WDM/XDM too ugly... I actually made KDM look pretty sexy.. People say you can't, but it's not that hard... I'll make some screenies if anyone want some

  • Is X-windows and GUI desktops supported on the ODA "engineered system" running a RAC database?  If it is, what is the yum command needed to install the X-windows, Gnome, and KDE package groups?

    Is X-windows and GUI desktops supported on the ODA "engineered system" running a RAC database?  If it is, what is the yum command needed to install the X-windows, Gnome, and KDE package groups?

    While I agree with the direction of the suggestions with installing packages for X-windows, we do not have a blanket 'apply any package' recommendation.
    In particular we do not support altering the kernel (although we do have exceptions which we review on a case by case basis).
    Basically, if the you want to alter functionality that would not impact core functionality you are usually fine.
    A good guideling is : The more dependencies that there are between the package / rpm you are considering using the higher the potential impact on functionality - meaning higher chance for problems
    Note: We do use VNC including Real and Tiger regularly , but we have no hard recommendation on how you may want to use X-windows. I have never seen a limitation other than comments on bugs
    or incompatibility within the X-window product itself with certain kernel levels.
    Patching may overwrite some packages that you may install, however,  _depending on packages/rpms added_ there is also the possibility that you will break existing functionality to the point
    that patching itself will fail ( we have already seen a few cases of this in which case the proper mitigation is to remove / roll-back any alterations to the ODA before patching, and then adding the packages/rpms
    back after the patching is completed.
    From what you are discussing the impact should be low without conflicts, but please consider the above, and if you have specific packages which you consider potential problems
    please create an SR so that we can review packages / rpms on an individual basis.
    Once again: the main criteria for not supporting rpms is regarding the kernel itself
    Chuck

  • Gnome and kde not loading with systemd

    Hello!
    I use [testing] repo and after some updates i can't use gnome or kde with systemd anymore.
    * with sysvinit everything works
    * xfce and other wms works fine with systemd and sysv
    * 'gnome-shell --replace' also work in xfce with systemd
    * I've got some errors:
    gnome-session[2301]: WARNING: Application 'gnome-settings-daemon.desktop' failed to register before timeout
    (gnome-settings-daemon:2321): libupower-glib-WARNING **: Couldn't enumerate devices: Activation of org.freedesktop.UPower timed out
    gnome-session[2301]: WARNING: Application 'gnome-shell.desktop' failed to register before timeout
    (gnome-settings-daemon:2321): color-plugin-WARNING **: GDBus.Error:org.freedesktop.ColorManager.Failed: failed to obtain org.freedesktop.color-manager.create-profile auth
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    Object::connect: No such signal QDBusAbstractInterface::DeviceAdded(QString)
    plasma-desktop(2323): Communication problem with  "plasma-desktop" , it probably crashed.
    Error message was:  "org.freedesktop.DBus.Error.Disconnected" : " "Connection was disconnected before a reply was received" "
    I think there is some problems with dbus...

    Without a dbus socket, dbus probably isn't running. It's supposed to be started automatically when a program needs it. Check to see that it is installed and running:
    pacman -Q dbus
    pgrep -l dbus
    Dbus won't run without hal, so hal should be in:
    tail /etc/rc.conf
    Are any of your partitions full?
    df -h
    For the other error, it looks like libdrm isn't installed, but I don't think you need it if you're running the nvidia driver.
    Your xorg.conf and Xorg.0.log would also be useful. Also check dmesg for errors.
    And see if /etc/rc.d/dbus is marked executable.
    Last edited by fphillips (2009-05-12 18:27:41)

  • GNOME and KDE file associations

    Hi,
    I like to use KDE and GNOME, alternating between them. Sounds crazy, but I like both. Please, let's avoid the "GNOME vs. KDE" discussion, right?
    My problem is: I like to use different file associations when I'm using GNOME or KDE. For example, I'd like to associate text files with gedit in GNOME and with Kate in KDE. But if I associate text files to gedit in GNOME, when I run KDE and open a text file it opens gedit. If I associate them with Kate in KDE, when I'm using GNOME it'll use Kate as its text editor.
    Some time ago I could have both desktop environments without this mess. Can I have this behaviour back?

    Yeah, I got tired of Evolution not knowing about opening *.docs in openoffice.  After several hours of research, the key is the /usr/share/applications/mimeinfo.cache,  /opt/gnome/share/applications/mimeinfo.cache, and the MimeType fields in the *.desktop files.  The mimeinfo.cache in /usr was empty and the /opt one had gthumb and other apps but no OO:
    [MIME Cache]
    application/x-gnome-stones=gnome-stones.desktop
    image/jpeg=gthumb.desktop
    application/postscript=ggv.desktop
    ...snip...
    That's a lot of blather to say that the fix for Evolution/OpenOffice was to add the proper MimeType entry to /usr/share/applications/ooo645writer.desktop:
    MimeType=application/vnd.ms-word;application/msword
    and then run "update-desktop-database".  Problem solved.
    Another problem is that within Evolution it says an attached doc is a "application/msword" and not a "Microsoft Word Document".  Unfortunately this is because freedesktop.org decided to use application/vnd.ms-word instead of application/msword like the rest of the world.  If you check the vnd.ms-word entry in /usr/share/mime/packages/freedesktop.org.xml it defines an alias msword but the new mime system doesn't appear to recognize aliases yet.  The solution I used was to rename the entry to msword.  Another possible solution might be to remove the msword alias from the vnd.ms-word entry and create a new msword entry based on the vnd.ms-word one.  Then run "update-mime-database /usr/share/mime".  Hope that made sense.
    I think the defaults.list is part of the previous GNOME MIME setup cause I don't have one and I'm not experiencing any problems.  For other apps check for the associations in the mimeinfo.cache's and if missing add the MimeType's to the app's *.desktop.

  • Gnome and KDE 4.1 without mixing?

    I'm running Gnome and love it, but wanted to give KDE 4.1 a chance so I installed it too. When logging in (GDM) I choose whether I want to run Gnome or KDE 4.1,  but when I boot KDE the kde menus are full Gnome stuff, and when I boot Gnome, the menus are full of KDE stuff. It's a mix I don't like. Either I run Gnome or KDE.
    Is there a way to stop the Gnome menus scanning the KDE apps and the KDE menus to stop scanning the Gnome apps?
    Besides that, when I'm in Gnome and open a nautilus bookmark from the "Places" menu, Konquerer starts up happily and makes me think, "What a mess. Is this the way it's supposed to work?"
    If I want to run Gnome only and KDE only, do I need to make a dual boot with two separate Arch installations?
    Last edited by thunderogg (2008-08-01 08:54:02)

    The menu "problem" is due to both desktops using the standard menu item location (Freedesktop.org, I believe defines this).  If you want completely separate, you don't have to dual boot with two separate Arch installs, just create a new user and make a shared data location that your KDE and Gnome user can access.  For example:
    /home/thunderogg could be thunderogg, your Gnome user
    /home/kthunderogg could be kthunderogg, your KDE user
    Create a new /home/shared folder with permissions for both users and save your documents there.  That's the only way that I know of to have both installed and not have a menu mess.

  • Gnome AND KDE won't start (i686 and 64bit)

    http://bbs.archlinux.org/viewtopic.php?id=71991
    I've had a rough time these past few days and I posted earlier on Arch64 forums thinking it was just architecture thing but as it turns out after my reinstallation of Arch to 64 bit again (First i686, then 64, then i686 and now 64 again) I finally got it to work but this time Gnome is a pain in the ass, it didn't work with KDE either but KDE never gave me an error or gave me an option to failsafe into the OS.
    $HOME/.xsession-errors:
    /etc/gdm/Xsession: Beginning session setup...
    /etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
    gnome-session[3898]: WARNING: Could not connect to ConsoleKit: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
    gnome-session[3898]: CRITICAL: dbus_g_connection_get_connection: assertion `gconnection' failed
    process 3898: arguments to dbus_connection_send_with_reply_and_block() were incorrect, assertion "connection != NULL" failed in file dbus-connection.c line 3298.
    This is normally a bug in some application using the D-Bus library.
    D-Bus not built with -rdynamic so unable to print a backtrace
    gnome-session[3898]: ******************* START ********************************
    gnome-session[3898]: Frame 0: gnome-session [0x4192d7]
    gnome-session[3898]: Frame 1: gnome-session [0x419426]
    gnome-session[3898]: Frame 2: /lib/libc.so.6 [0x7f3cbc493ec0]
    gnome-session[3898]: Frame 3: /lib/libc.so.6(gsignal+0x35) [0x7f3cbc493e45]
    gnome-session[3898]: Frame 4: /lib/libc.so.6(abort+0x19a) [0x7f3cbc4952aa]
    gnome-session[3898]: Frame 5: /usr/lib/libdbus-1.so.3 [0x7f3cbef6ab95]
    gnome-session[3898]: Frame 6: /usr/lib/libdbus-1.so.3 [0x7f3cbef66a5d]
    gnome-session[3898]: Frame 7: /usr/lib/libdbus-1.so.3(dbus_connection_send_with_reply_and_block+0x198) [0x7f3cbef50a88]
    gnome-session[3898]: Frame 8: gnome-session [0x41203c]
    gnome-session[3898]: Frame 9: gnome-session [0x412140]
    gnome-session[3898]: Frame 10: gnome-session [0x41a5b0]
    gnome-session[3898]: Frame 11: gnome-session [0x41aa8f]
    gnome-session[3898]: Frame 12: /lib/libc.so.6(__libc_start_main+0xfd) [0x7f3cbc48055d]
    gnome-session[3898]: Frame 13: gnome-session [0x40aef9]
    gnome-session[3898]: ******************* END **********************************
    /var/log/gdm/:0.log.3
    X.Org X Server 1.6.1
    Release Date: 2009-4-14
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH x86_64
    Current Operating System: Linux deuklin 2.6.29-ARCH #1 SMP PREEMPT Sat May 9 14:09:36 CEST 2009 x86_64
    Build Date: 15 April 2009 11:01:49AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 12 08:55:10 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    dlopen: libdrm.so.2: cannot open shared object file: No such file or directory
    (EE) Failed to load /usr/lib/xorg/modules/extensions//libdri.so
    (EE) Failed to load module "dri" (loader failed, 7)
    (EE) Failed to load module "freetype" (module does not exist, 0)
    dlopen: libdrm.so.2: cannot open shared object file: No such file or directory
    (EE) Failed to load /usr/lib/xorg/modules/extensions//libdri2.so
    (EE) Failed to load module "dri2" (loader failed, 7)
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    Just a point here is that I've had the exact same software installed the same day that I reinstalled and this error did not occur but after formatting my partition with ext4 and testing Arch64 it did. But it did with 32bit as well, there were tons of errors.
    I've read about this ConsoleKit error in a few posts here but nothing seems to indicate a fix or anything and since I'm using Gnome now I didn't find anything on it just about KDE.
    I can safely use "Failsafe Gnome" without startup scripts but I want it to work without any problems and I don't know if the "dri" thing is related to the ConsoleKit thing with GDM.
    I installed it via FTP and had the latest updates as soon as I've installed, so if this is just something that is happening to me right now or alot of other people, please give us hints or anything that could solve this?
    If you read my Arch64 thread you know that stuff stopped working for me, first the network (it turns out I had to boot Windows inbetween installing Arch for my network even to start and that sounds ridicilous if it depends on another operating system starting the device because in Windows the network card was turned on with a green light wherein Arch after installing it didn't. I reformated my partitions and changed it again, installed Windows again and tried it out and then installed Arch. It worked, and then I mixed around with KDE and after five minutes of using "startx" (the only thing working) I decided to reinstall with Gnome, but then the network didn't start again (tried booting about ten times) and then I just thought "Let's start windows first so it turns on" and when I just booted Windows and immiedatiely restarted it and booted with the Arch CD, network was available again. Strange? Or is this a period of instability for Arch?
    But when I got my network to start, appearantly Keyboard and mouse wasn't working because Xorg forgot to install the drivers when I installed the full group of Xorg so I had to fix that and now it's giving me this error.

    Without a dbus socket, dbus probably isn't running. It's supposed to be started automatically when a program needs it. Check to see that it is installed and running:
    pacman -Q dbus
    pgrep -l dbus
    Dbus won't run without hal, so hal should be in:
    tail /etc/rc.conf
    Are any of your partitions full?
    df -h
    For the other error, it looks like libdrm isn't installed, but I don't think you need it if you're running the nvidia driver.
    Your xorg.conf and Xorg.0.log would also be useful. Also check dmesg for errors.
    And see if /etc/rc.d/dbus is marked executable.
    Last edited by fphillips (2009-05-12 18:27:41)

  • Two quick gnome and KDE questions

    i dig gnome, wife and kids dig KDE we as a group only use one user account.
    so heres the deal...
    when i make a change to the KDE desktop ( different icons, device, etc..) it effects gnome also. is there a way i can seperate their config files so that whatever i do to one does not effect the other ?
    other question : i know that the Yahoo messenger thing has been fixed in the CVS version of Kopete. how can i make that happen ? can i find a PKGBUILD script for the cvs Kopete somewhere ? i think that it is just part of one of the KDE packages and i dont need to reinstall everything to get that going.
    ok, any suggestions would be much appreciated..
    Arch Rocks !

    -> is there some reason why you use only one user-account? i highly advice you to switch to a more-user way of using linux
    the icons on the desktop cannot be separated easily (kde<->gnome), as both use ~/Desktop/.. structure (what became also standard and is also good being), so the best way would be to have more than one user
    kde? gnome? try xfce4 :-)
    yahoo: kopete: hmm... earlier, kopete was a separate pkg (it was not part of the official kde-release), and it was very easy to rebuild only kopete on cvs --- now, things became a little more complicated: you need to rebuild kdenetwork (as far as i can remember), but as kde 3.3.beta1 (klassroom) is out, let's hope that some of the great users start a repository for it (some time ago someone from the comunity was running his/her own repository with the actual kde beta, but i was not able to find this thread - maybe deleted now)
    you can also play around with ABS (see docs) and build your own kde 3.3beta1 pkgs and install them, but if you are a newbie, it would be a time-consuming, but learning experience

  • System wide proxy settings without gnome and kde

    Hi,
    this is my software stack:
    linux
    X
    openbox
    chromium
    my university had the great idea to cencor and filter the internet so that students can't do bad stuff and besides that can't do anything at all. They even block ping and ssh connections.. but that's another story.
    here are my problems with that:
    chomium devs seem to live in a very small world in which only kde and gnome exist, because these envirenments are the only way to let chromium know that it should use a proxy server.
    I've written a small script that works perfectly for most of my stuff. here it is:
    $ cat ~/.proxyon
    export http_proxy='proxy.fh-brandenburg.de:3128'
    export https_proxy='proxy.fh-brandenburg.de:3128'
    export ftp_proxy='ftp-proxy.fh-brandenburg.de:21'
    export socks5_proxy='socks5-proxy.fh-brandenburg.de:1080'
    export HTTP_PROXY=http_proxy
    export HTTPS_PROXY=https_proxy
    export FTP_PROXY=ftp_proxy
    export SOCKS5_PROXY=socks5_proxy
    gsettings set org.gnome.system.proxy autoconfig-url 'http://proxy.fh-brandenburg.de/proxy.pac'
    gsettings set org.gnome.system.proxy mode 'manual'
    gsettings set org.gnome.system.proxy.http enabled true
    gsettings set org.gnome.system.proxy.http host 'proxy.fh-brandenburg.de'
    gsettings set org.gnome.system.proxy.http port 3128
    gsettings set org.gnome.system.proxy.https host 'proxy.fh-brandenburg.de'
    gsettings set org.gnome.system.proxy.https port 3128
    gsettings set org.gnome.system.proxy.ftp host 'ftp-proxy.fh-brandenburg.de'
    gsettings set org.gnome.system.proxy.ftp port 21
    gsettings set org.gnome.system.proxy.socks host 'socks5-proxy.fh-brandenburg.de'
    gsettings set org.gnome.system.proxy.socks port 1080
    gsettings set org.gnome.system.proxy ignore-hosts "['localhost', '127.0.0.0/8', '*.fh-brandenburg.de' ]"
    to start chromium i've made another script to test the proxy behavier:
    $ cat ~/start_chromium.sh
    source ~/.proxyon && echo $http_proxy && chromium
    This should work because I set every proxy variable I'm aware of and the script spits out the correct proxy server but chromium still don't uses any proxies. Does anyone have a solution to this? I'm out of ideas..

    delta24 wrote:Try creating a script in /etc/profile.d named proxy.sh having all the proxy config.
    The behavier I want to achieve is that I can hot swap proxy and non proxy networks without restarting the browser. This works under gnome because chromium reads the proxy config from gconf which gets updated on network change but this doesn't work without gnome.
    Most of the time I'm on networks without proxies. Only in university I need them. A simple switch to activate them when needed would be nice.

  • Sound with both GNOME and KDE installed[SOLVED]

    Is there something that can be conflicting with my alsa-setup if I install kdenlive on my multimedia-station. I have an USB-soundcard as default device on my GNOME desktop and everything is running really well. I saw that there are a lot of KDE-dependencies to kdenlive, phonon among others. I think that is some kind of sound-backend. I have had some troubles with sound when I have been running KDE.
    Last edited by jai134 (2010-04-06 18:21:55)

    I don't think anything should go wrong. Anyway, you may want to choose the actual backend that phonon will be using: it can be either xine or gstreamer, but since you are using gnome you are probably using gstreamer already. You can check each backend's dependencies and choose the one you use for the rest of your multimedia apps here: http://www.archlinux.org/packages/?q=phonon

  • Black screen gnome and kde, openbox fine

    I installed the testing xorg a month or so back and it naturally broke my system (i use ati and fglrx). I downgraded the relevant packages and am no longer using the testing rep, but now gdm comes up fine, but logging into gnome or kde4-mod just gives me a black screen with working mouse. Openbox works fine however, i've been using that but would like to see how kde4 has progressed. Any ideas? Couldn't find anything by searching.
    xorg.conf:
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    # PS/2 Mouse not detected
    # Serial Mouse not detected
    InputDevice "USB Mouse" "CorePointer"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    FontPath "/usr/share/fonts/cyrillic"
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "drm"
    Load "record"
    # Load "synaptics"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
    VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    # 640x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    # 720x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    # 640x480 @ 72Hz (VESA) hsync: 37.9kHz
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    # 640x480 @ 75Hz (VESA) hsync: 37.5kHz
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    # 640x480 @ 85Hz (VESA) hsync: 43.3kHz
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    # 800x600 @ 56Hz (VESA) hsync: 35.2kHz
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    # 800x600 @ 60Hz (VESA) hsync: 37.9kHz
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    # 800x600 @ 72Hz (VESA) hsync: 48.1kHz
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    # 800x600 @ 75Hz (VESA) hsync: 46.9kHz
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    # 800x600 @ 85Hz (VESA) hsync: 53.7kHz
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
    # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    # Additional modelines
    ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    # Extended modelines with GTF timings
    # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
    ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
    # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
    ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
    # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
    ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
    # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
    ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
    # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
    ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
    # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
    ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
    # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
    ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
    # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
    ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
    # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
    ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
    # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
    ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
    # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
    ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
    # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
    ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
    # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
    ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
    # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
    ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
    # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
    ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
    # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
    ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
    # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
    ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
    # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
    ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
    # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
    ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
    # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
    ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
    # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
    ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Device"
    Identifier "Card0"
    Driver "fglrx"
    VendorName "All"
    BoardName "All"
    Option "DRI" "true"
    Option "XAANoOffscreenPixmaps" "on"
    Option "VideoOverlay" "on"
    Option "OpenGLOverlay" "off"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 24
    SubSection "Display"
    Depth 1
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection

    Anyone know what this relates to?
    from xorg log:
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetMode$
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetMode$
    $etModeTimingOverride failed: 2
    I'm sure I had that error before anyway. This black screen is killing me...it teases by showing the loading icons for 10 seconds[kde4] then just black.

  • Global GNOME and KDE default configfiles

    Hello ArchCommunity.
    I build a multi-user-remote-system with x2go. All Users should use KDE4 or GNOME (current 2.x) as Desktop Environment.
    Where are all global (default) configfiles for this both environments? I need to chance defualt- desktop,
    menu and some other stuff.
    Thanks for any advice
    zyon

    KDE ones are in /usr/share/config

  • VERY strange lag on a Dell Optiplex 760

    I thought it would be a good idea to keep a 16GB flash drive on my keychain that booted Arch so I could work on HW for college in a consistent OS!  Everything is working great so far, but I ran into a very strange problem with a Dell Optiplex 760.  During the normal Arch init process, everything loads great, except for when it gets to the udev stage where everything hangs.  But here's the strange part of this scenario: the problems go away when I start typing random keys or move the mouse!  If I don't do this, the system hangs completely from what I can tell.  This happens at the console and with X. 
    The service tag for this machine is FDCQQJ1, and the dell.com driver area brings up this list of hardware and (windows) drivers for it.
    Here's the #lspci -vv of the system:
    00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
    Subsystem: Dell Device 027f
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
    Kernel driver in use: agpgart-intel
    Kernel modules: intel-agp
    00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
    Subsystem: Dell Device 027f
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 33
    Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=4M]
    Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Region 4: I/O ports at ec90 [size=8]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Address: fee0300c Data: 41c1
    Capabilities: [d0] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: i915
    Kernel modules: i915
    00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
    Subsystem: Dell Device 027f
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1M]
    Capabilities: [d0] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    00:03.0 Communication controller: Intel Corporation 4 Series Chipset HECI Controller (rev 03)
    Subsystem: Dell Device 027f
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at feda6000 (64-bit, non-prefetchable) [size=16]
    Capabilities: [50] Power Management version 3
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
    Address: 0000000000000000 Data: 0000
    00:03.2 IDE interface: Intel Corporation 4 Series Chipset PT IDER Controller (rev 03) (prog-if 85 [Master SecO PriO])
    Subsystem: Dell Device 027f
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin C routed to IRQ 18
    Region 0: I/O ports at fe80 [size=8]
    Region 1: I/O ports at fe90 [size=4]
    Region 2: I/O ports at fea0 [size=8]
    Region 3: I/O ports at feb0 [size=4]
    Region 4: I/O ports at fef0 [size=16]
    Capabilities: [c8] Power Management version 3
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
    Address: 0000000000000000 Data: 0000
    00:03.3 Serial controller: Intel Corporation 4 Series Chipset Serial KT Controller (rev 03) (prog-if 02 [16550])
    Subsystem: Dell Device 027f
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 17
    Region 0: I/O ports at ec98 [size=8]
    Region 1: Memory at fe6d8000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [c8] Power Management version 3
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
    Address: 0000000000000000 Data: 0000
    Kernel driver in use: serial
    00:19.0 Ethernet controller: Intel Corporation 82567LM-3 Gigabit Network Connection (rev 02)
    Subsystem: Dell Device 027f
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 32
    Region 0: Memory at fe6e0000 (32-bit, non-prefetchable) [size=128K]
    Region 1: Memory at fe6d9000 (32-bit, non-prefetchable) [size=4K]
    Region 2: I/O ports at ecc0 [size=32]
    Capabilities: [c8] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
    Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Address: 00000000fee0300c Data: 41d1
    Capabilities: [e0] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: e1000e
    Kernel modules: e1000e
    00:1a.0 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell Device 027f
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 4: I/O ports at ff20 [size=32]
    Capabilities: [50] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd
    00:1a.1 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell Device 027f
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 17
    Region 4: I/O ports at ff00 [size=32]
    Capabilities: [50] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd
    00:1a.2 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell Device 027f
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 22
    Region 4: I/O ports at fc00 [size=32]
    Capabilities: [50] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd
    00:1a.7 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
    Subsystem: Dell Device 027f
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 22
    Region 0: Memory at fe6da000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd
    00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller (rev 02)
    Subsystem: Dell Device 027f
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at fe6dc000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
    Address: 0000000000000000 Data: 0000
    Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    ExtTag- RBE- FLReset+
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
    ClockPM- Surprise- LLActRep- BwNot-
    LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
    Capabilities: [100 v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed- WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
    Status: NegoPending- InProgress-
    VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
    Status: NegoPending- InProgress-
    Capabilities: [130 v1] Root Complex Link
    Desc: PortNumber=0f ComponentID=02 EltType=Config
    Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
    Addr: 00000000feda8000
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel
    00:1c.0 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 00001000-00001fff
    Memory behind bridge: fe500000-fe5fffff
    Prefetchable memory behind bridge: 000000007e000000-000000007e1fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    ExtTag- RBE+ FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us
    ClockPM- Surprise- LLActRep+ BwNot-
    LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
    Slot #5, PowerLimit 10.000W; Interlock- NoCompl+
    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
    Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
    Changed: MRL- PresDet- LinkState-
    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    RootCap: CRSVisible-
    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
    DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
    LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
    LnkSta2: Current De-emphasis Level: -6dB
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Address: fee0300c Data: 4189
    Capabilities: [90] Subsystem: Dell Device 027f
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed+ WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
    Status: NegoPending- InProgress-
    Capabilities: [180 v1] Root Complex Link
    Desc: PortNumber=01 ComponentID=02 EltType=Config
    Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
    Addr: 00000000feda8000
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.1 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 00002000-00002fff
    Memory behind bridge: fe400000-fe4fffff
    Prefetchable memory behind bridge: 000000007e200000-000000007e3fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    ExtTag- RBE+ FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us
    ClockPM- Surprise- LLActRep+ BwNot-
    LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
    Slot #4, PowerLimit 10.000W; Interlock- NoCompl+
    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
    Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
    Changed: MRL- PresDet- LinkState-
    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    RootCap: CRSVisible-
    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
    DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
    LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
    LnkSta2: Current De-emphasis Level: -6dB
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Address: fee0300c Data: 4191
    Capabilities: [90] Subsystem: Dell Device 027f
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed+ WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
    Status: NegoPending- InProgress-
    Capabilities: [180 v1] Root Complex Link
    Desc: PortNumber=02 ComponentID=02 EltType=Config
    Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
    Addr: 00000000feda8000
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1d.0 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell Device 027f
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 4: I/O ports at ff80 [size=32]
    Capabilities: [50] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd
    00:1d.1 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell Device 027f
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 17
    Region 4: I/O ports at ff60 [size=32]
    Capabilities: [50] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd
    00:1d.2 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell Device 027f
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 18
    Region 4: I/O ports at ff40 [size=32]
    Capabilities: [50] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd
    00:1d.7 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
    Subsystem: Dell Device 027f
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [50] Subsystem: Dell Device 027f
    00:1f.0 ISA bridge: Intel Corporation 82801JD (ICH10D) LPC Interface Controller (rev 02)
    Subsystem: Dell Device 027f
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
    Kernel modules: iTCO_wdt
    00:1f.2 IDE interface: Intel Corporation 82801JD/DO (ICH10 Family) 4-port SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
    Subsystem: Dell Device 027f
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 18
    Region 0: I/O ports at fe00 [size=8]
    Region 1: I/O ports at fe10 [size=4]
    Region 2: I/O ports at fe20 [size=8]
    Region 3: I/O ports at fe30 [size=4]
    Region 4: I/O ports at fec0 [size=16]
    Region 5: I/O ports at eca0 [size=16]
    Capabilities: [70] Power Management version 3
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [b0] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: ata_piix
    Kernel modules: ata_piix
    00:1f.3 SMBus: Intel Corporation 82801JD/DO (ICH10 Family) SMBus Controller (rev 02)
    Subsystem: Dell Device 027f
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin C routed to IRQ 18
    Region 0: Memory at fe6db000 (64-bit, non-prefetchable) [size=256]
    Region 4: I/O ports at ece0 [size=32]
    Kernel driver in use: i801_smbus
    Kernel modules: i2c-i801
    00:1f.5 IDE interface: Intel Corporation 82801JD/DO (ICH10 Family) 2-port SATA IDE Controller (rev 02) (prog-if 85 [Master SecO PriO])
    Subsystem: Dell Device 027f
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 18
    Region 0: I/O ports at fe40 [size=8]
    Region 1: I/O ports at fe50 [size=4]
    Region 2: I/O ports at fe60 [size=8]
    Region 3: I/O ports at fe70 [size=4]
    Region 4: I/O ports at fed0 [size=16]
    Region 5: I/O ports at ecb0 [size=16]
    Capabilities: [70] Power Management version 3
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [b0] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: ata_piix
    Kernel modules: ata_piix
    I have googled around a bit, and I've read about others (surprisingly) having the same issue, but I've found no answers to my avail yet.

    Here are the packages installed on my system, with versions (output of pacman -Qs):
    local/a2ps 4.14-1
    a2ps is an Any to PostScript filter
    local/a52dec 0.7.4-4
    liba52 is a free library for decoding ATSC A/52 streams.
    local/acl 2.2.48-1 (base)
    Library for filesystem ACL support
    local/alsa-lib 1.0.22-1
    An alternative implementation of Linux sound support
    local/alsa-utils 1.0.22-2
    An alternative implementation of Linux sound support
    local/aspell 0.60.6-4
    A spell checker designed to eventually replace Ispell
    local/ati-dri 7.7-1
    Mesa DRI drivers for AMD/ATI Radeon
    local/atk 1.28.0-1
    A library providing a set of interfaces for accessibility
    local/attr 2.4.44-1 (base)
    Extended attribute support library for ACL support
    local/autoconf 2.65-1 (base-devel)
    A GNU tool for automatically configuring source code
    local/automake 1.11.1-1 (base-devel)
    A GNU tool for automatically creating Makefiles
    local/avahi 0.6.25-3
    A multicast/unicast DNS-SD framework
    local/b43-firmware 4.150.10.5-1
    Firmware for Broadcom B43 wireless networking chips
    local/b43-fwcutter 012-1
    firmware extractor for the bcm43xx kernel module
    local/bash 4.1.002-2 (base)
    The GNU Bourne Again shell
    local/beanshell 2.0b4-1
    Small, free, embeddable, source level Java interpreter with object based
    scripting language features written in Java
    local/bin86 0.16.17-4 (base-devel)
    A complete 8086 assembler and loader
    local/binutils 2.20-3 (base)
    A set of programs to assemble and manipulate binary and object files
    local/bison 2.4.1-1 (base-devel)
    The GNU general-purpose parser generator
    local/bzip2 1.0.5-5 (base)
    A high-quality data compression program
    local/ca-certificates 20090814-2
    Common CA certificates
    local/ca-certificates-java 20090629-2
    Common CA certificates (JKS keystore)
    local/cabextract 1.2-2
    A program to extract Microsoft cabinet (.CAB) files.
    local/cairo 1.8.10-1
    Cairo vector graphics library
    local/cairomm 1.8.4-1
    C++ bindings to Cairo vector graphics library
    local/cdparanoia 10.2-2
    Compact Disc Digital Audio extraction tool
    local/cloog-ppl 0.15.7-1
    Library that generates loops for scanning polyhedra
    local/compositeproto 0.4.1-1
    X11 Composite extension wire protocol
    local/consolekit 0.4.1-2
    A framework for defining and tracking users, login sessions, and seats
    local/coreutils 8.4-1 (base)
    The basic file, shell and text manipulation utilities of the GNU operating
    system
    local/cpio 2.10-1 (base)
    A tool to copy files into or out of a cpio or tar archive
    local/cracklib 2.8.13-2 (base)
    Password Checking Library
    local/cryptsetup 1.1.0-2 (base)
    Userspace setup tool for transparent encryption of block devices using the
    Linux 2.6 cryptoapi
    local/curl 7.20.0-1
    An URL retrival utility and library
    local/cyrus-sasl-plugins 2.1.23-1
    Cyrus Simple Authentication Service Layer (SASL) library
    local/damageproto 1.2.0-1
    X11 Damage extension wire protocol
    local/dash 0.5.5.1-2 (base)
    A POSIX compliant shell that aims to be as small as possible
    local/db 4.8.26-1 (base)
    The Berkeley DB embedded database system
    local/dbus 1.2.20-1
    Freedesktop.org message bus system
    local/dbus-core 1.2.20-1
    Freedesktop.org message bus system
    local/dbus-glib 0.82-2
    GLib bindings for DBUS
    local/dcron 4.4-2 (base)
    dillon's lightweight cron daemon
    local/desktop-file-utils 0.15-1
    Command line utilities for working with desktop entries
    local/device-mapper 2.02.60-3 (base)
    Device mapper userspace library and tools
    local/dhcpcd 5.2.1-1 (base)
    RFC2131 compliant DHCP client daemon
    local/dialog 1.1_20100119-1 (base)
    A tool to display dialog boxes from shell scripts
    local/diffutils 2.9-1 (base)
    Utility programs used for creating patch files
    local/dmidecode 2.10-1
    Desktop Management Interface table related utilities
    local/dmxproto 2.3-1
    X11 Distributed Multihead X extension wire protocol
    local/dosfstools 3.0.9-1
    DOS filesystem utilities
    local/dri2proto 2.1-2
    X11 DRI protocol
    local/e2fsprogs 1.41.10-1 (base)
    Ext2/3/4 filesystem utilities
    local/ed 1.4-1 (base-devel)
    A POSIX-compliant line editor
    local/eggdbus 0.6-1
    Experimental D-Bus bindings for GObject
    local/eject 2.1.5-4
    Eject is a program for ejecting removable media under software control
    local/enca 1.13-1
    Charset analyser and converter
    local/enchant 1.5.0-3
    A wrapper library for generic spell checking
    local/eventlog 0.2.9-1
    A new API to format and send structured log messages
    local/exo 0.3.106-1 (xfce4)
    Extensions to Xfce by os-cillation
    local/expat 2.0.1-5
    An XML Parser library written in C
    local/faac 1.28-2
    FAAC is an AAC audio encoder
    local/faad2 2.7-1
    ISO AAC audio decoder
    local/fakeroot 1.14.4-2 (base-devel)
    Gives a fake root environment, useful for building packages as a
    non-privileged user
    local/farsight2 0.0.17-1
    Audio/Video conference software for Instant Messengers
    local/ffmpeg 22511-1
    Complete and free Internet live audio and video broadcasting solution for
    Linux/Unix
    local/file 5.04-2 (base)
    File type identification utility
    local/filesystem 2010.02-4 (base)
    Base filesystem
    local/findutils 4.4.2-1 (base)
    GNU utilities to locate files
    local/fixesproto 4.1.1-1
    X11 Fixes extension wire protocol
    local/flac 1.2.1-2
    Free Lossless Audio Codec
    local/flashplugin 10.0.45.2-1
    Adobe Flash Player
    local/flex 2.5.35-3 (base-devel)
    A tool for generating text-scanning programs
    local/fluidsynth 1.1.1-2
    A real-time software synthesizer based on the SoundFont 2 specifications
    local/fontcacheproto 0.1.3-1
    X11 font cache extension wire protocol
    local/fontconfig 2.8.0-1
    A library for configuring and customizing font access
    local/fontsproto 2.1.0-1
    X11 font extension wire protocol
    local/freeglut 2.6.0-1
    Provides functionality for small OpenGL programs
    local/freetype2 2.3.12-1
    TrueType font rendering library
    local/fribidi 0.19.2-1
    A Free Implementation of the Unicode Bidirectional Algorithm
    local/frozen-bubble 2.2.0-2
    A game in which you throw colorful bubbles and build groups to destroy the
    bubbles
    local/fuse 2.8.3-1
    A library that makes it possible to implement a filesystem in a userspace
    program.
    local/gamin 0.1.10-1
    Gamin is a file and directory monitoring system defined to be a subset of
    the FAM (File Alteration Monitor) system.
    local/gawk 3.1.7-1 (base)
    Gnu version of awk
    local/gcc 4.4.3-1 (base-devel)
    The GNU Compiler Collection
    local/gcc-libs 4.4.3-1 (base)
    Runtime libraries shipped by GCC for C and C++ languages
    local/gconf 2.28.0-1
    A configuration database system
    local/gdbm 1.8.3-6 (base)
    GNU database library
    local/gdk-pixbuf 0.22.0-7
    Image loading and manipulation library
    local/gen-init-cpio 2.6.32-1 (base)
    Program to compress initramfs images
    local/gettext 0.17-3 (base)
    GNU internationalization library
    local/ghostscript 8.71-2
    An interpreter for the PostScript language
    local/giflib 4.1.6-3
    A library for reading and writing gif images
    local/git 1.7.0.2-1
    the fast distributed version control system
    local/gksu 2.0.2-2
    A graphical frontend for su
    local/glib 1.2.10-8
    Common C routines used by Gtk+ and other libs
    local/glib2 2.22.4-1
    Common C routines used by GTK+ 2.4 and other libs
    local/glibc 2.11.1-1 (base)
    GNU C Library
    local/glibmm 2.22.1-1
    Glib-- (glibmm) is a C++ interface for glib
    local/gmp 4.3.2-1
    A free library for arbitrary precision arithmetic
    local/gnome-icon-theme 2.28.0-1 (gnome)
    Default icon theme for GNOME2
    local/gnome-keyring 2.28.2-1
    GNOME Password Management daemon
    local/gnutls 2.8.5-1
    A library which provides a secure layer over a reliable transport layer
    local/google-chrome-dev 5.0.342.3-1
    Google Chrome Developer preview channel for Linux
    local/gparted 0.5.2-1
    A Partition Magic clone, frontend to GNU Parted
    local/gpm 1.20.6-5
    A mouse server for the console and xterm
    local/gqview 2.0.4-3
    An image browser and viewer
    local/grep 2.5.4-3 (base)
    A string search utility
    local/groff 1.20.1-4
    GNU troff text-formatting system
    local/grub 0.97-16 (base)
    A GNU multiboot boot loader
    local/gsfonts 8.11-5
    Ghostscript standard Type1 fonts
    local/gstreamer0.10 0.10.28-1
    GStreamer Multimedia Framework
    local/gstreamer0.10-base 0.10.28-1
    GStreamer Multimedia Framework Base plugin libraries
    local/gstreamer0.10-base-plugins 0.10.28-1 (gstreamer0.10-plugins)
    GStreamer Multimedia Framework Base Plugins (gst-plugins-base)
    local/gstreamer0.10-python 0.10.18-1
    Python bindings for GStreamer 0.10
    local/gtk 1.2.10-10
    The GTK+ toolkit
    local/gtk-aurora-engine 1.5.1-1
    gtk-engine: latest member of the clearlooks family
    local/gtk-xfce-engine 2.6.0-1 (xfce4)
    A port of Xfce engine to GTK+-2.0
    local/gtk2 2.18.7-1
    The GTK+ Toolkit (v2)
    local/gtkmm 2.18.2-1
    C++ bindings for gtk2
    local/gtkspell 2.0.16-1
    GtkSpell provides word-processor-style highlighting and replacement of
    misspelled words in a GtkTextView widget
    local/gzip 1.4-1 (base)
    GNU compression utility
    local/hal 0.5.14-2
    Hardware Abstraction Layer
    local/hal-info 0.20091130-1
    Hardware Abstraction Layer information files
    local/hdparm 9.27-2 (base)
    A shell utility for manipulating Linux IDE drive/driver parameters
    local/heimdal 1.3.1-3
    Implementation of Kerberos V5 libraries
    local/hicolor-icon-theme 0.11-1
    Freedesktop.org Hicolor icon theme
    local/hsqldb-java 1.8.1.1-1
    HSQLDB Java libraries
    local/htop 0.8.3-1
    Interactive process viewer
    local/hunspell 1.2.8-2
    Spell checker and morphological analyzer library and program
    local/hyphen 2.4-1
    library for high quality hyphenation and justification
    local/icon-naming-utils 0.8.90-1
    Maps the new names of icons for Tango to the legacy names used by the GNOME
    and KDE desktops.
    local/icu 4.2.1-1
    International Components for Unicode library
    local/ilmbase 1.0.1-1
    IlmThread is a thread abstraction library for use with OpenEXR
    local/imagemagick 6.6.0.0-1
    An image viewing/manipulation program
    local/imlib2 1.4.2-6
    Library that does image file loading and saving as well as rendering,
    manipulation, arbitrary polygon support
    local/initscripts 2010.01-1 (base)
    System initialization/bootup scripts
    local/inputproto 2.0-1
    X11 Input extension wire protocol
    local/intel-dri 7.7-1
    Mesa DRI drivers for Intel
    local/iproute2 2.6.31-1
    IP Routing Utilities
    local/iptables 1.4.7-1
    A Linux kernel packet control tool
    local/iputils 20100214-2 (base)
    IP Configuration Utilities (and Ping)
    local/iso-codes 3.14-1
    Lists of the country, language, and currency names
    local/jack 0.116.2-1
    A low-latency audio server
    local/jasper 1.900.1-5
    A software-based implementation of the codec specified in the emerging
    JPEG-2000 Part-1 standard
    local/jfsutils 1.1.14-1 (base)
    JFS filesystem utilities
    local/json-glib 0.10.0-1
    JSON library built on GLib
    local/kbd 1.15.1-1 (base)
    Keytable files and keyboard utilities
    local/kbproto 1.0.4-1
    X11 XKB extension wire protocol
    local/kernel26 2.6.32.10-1 (base)
    The Linux Kernel and modules
    local/kernel26-firmware 2.6.32.10-1 (base)
    The included firmware files of the Linux Kernel
    local/kernel26-headers 2.6.32.10-1
    Header files and scripts for building modules for kernel26
    local/ladspa 1.13-2
    Linux Audio Developer's Simple Plugin API (LADSPA)
    local/lame 3.98.3-1
    An MP3 encoder and graphical frame analyzer
    local/lcms 1.18-3
    Lightweight color management development library/engine
    local/less 436-1 (base)
    A terminal based program for viewing text files
    local/libarchive 2.8.3-1
    library that can create and read several streaming archive formats
    local/libass 0.9.9-1
    A portable library for SSA/ASS subtitles rendering
    local/libcap 2.19-1
    POSIX 1003.1e capabilities
    local/libcddb 1.3.2-1
    Library that implements the different protocols (CDDBP, HTTP, SMTP) to
    access data on a CDDB server (e.g. http://freedb.org).
    local/libcdio 0.82-1
    GNU Compact Disc Input and Control Library
    local/libcroco 0.6.2-1
    GNOME CSS2 parsing and manipulation toolkit
    local/libcups 1.4.2-3
    The CUPS Printing System - client libraries and headers
    local/libdaemon 0.14-1
    A lightweight C library which eases the writing of UNIX daemons
    local/libdatrie 0.2.3-1
    Libdatrie is an implementation of double-array structure for representing
    trie, as proposed by Junichi Aoe.
    local/libdca 0.0.5-2
    Free library for decoding DTS Coherent Acoustics streams
    local/libdmx 1.1.0-1
    X11 Distributed Multihead extension library
    local/libdrm 2.4.18-2
    Userspace interface to kernel DRM services
    local/libdvbpsi 0.1.6-3
    MPEG TS and DVB PSI tables library (needed by vlc for streaming)
    local/libdvdnav 4.1.3-2
    The library for xine-dvdnav plugin.
    local/libdvdread 4.1.3-1
    libdvdread provides a simple foundation for reading DVD video disks
    local/libebml 0.7.8-2
    Extensible Binary Meta Language library
    local/libevent 1.4.13-1
    An event notification library
    local/libexif 0.6.19-1
    A library to parse an EXIF file and read the data from those tags
    local/libfetch 2.30-1 (base)
    URL based download library
    local/libfontenc 1.0.5-1
    X11 font encoding library
    local/libgcrypt 1.4.5-1 (base)
    a general purpose crypto library based on the code used
    local/libgksu 2.0.12-1
    gksu authorization library
    local/libgl 7.7-1
    Mesa 3-D graphics library and DRI software rasterizer
    local/libglade 2.6.4-1
    Allows you to load glade interface files in a program at runtime
    local/libgpg-error 1.7-2 (base)
    Support library for libgcrypt
    local/libgraphite 2.3.1-1
    SILGraphite - a "smart font" rendering engine - the libs and headers
    local/libgsf 1.14.16-1
    The GNOME Structured File Library is a utility library for reading and
    writing structured file formats
    local/libgssglue 0.1-2
    exports a gssapi interface which calls other random gssapi libraries
    local/libgtop 2.28.0-1
    A library that read information about processes and the running system
    local/libice 1.0.6-1
    X11 Inter-Client Exchange library
    local/libid3tag 0.15.1b-4
    library for id3 tagging
    local/libidl2 0.8.13-1
    A front-end for CORBA 2.2 IDL and Netscape's XPIDL
    local/libidn 1.16-1
    Implementation of the Stringprep, Punycode and IDNA specifications
    local/libjpeg 8.0.1-1
    Library of JPEG support functions
    local/libjpeg6 6b-9
    Library of JPEG support functions
    local/libldap 2.4.21-1
    Lightweight Directory Access Protocol (LDAP) client libraries
    local/libmad 0.15.1b-4
    A high-quality MPEG audio decoder
    local/libmatroska 0.8.1-2
    Matroska library
    local/libmikmod 3.1.12-3
    A portable sound library
    local/libmng 1.0.10-3
    A collection of routines used to create and manipulate MNG format graphics
    files
    local/libmodplug 0.8.7-1
    A MOD playing library
    local/libmp4v2 1.9.1-1
    MPEG-4 library
    local/libmpcdec 1.2.6-2
    Musepack decoding library
    local/libmpeg2 0.5.1-1
    libmpeg2 is a library for decoding MPEG-1 and MPEG-2 video streams.
    local/libmspack 0.0.20060920alpha-1
    local/libmtp 1.0.2-1
    library implementation of the Media Transfer Protocol
    local/libmysqlclient 5.1.45-1
    MySQL client libraries
    local/libnice 0.0.11-1
    An implementation of the IETF's draft ICE (for p2p UDP data streams)
    local/libnl 1.1-1
    Library for applications dealing with netlink sockets
    local/libnotify 0.4.5-1.1
    Desktop notification library
    local/libogg 1.1.4-1
    Ogg bitstream and framing library
    local/liboil 0.3.17-1
    Library of simple functions that are optimized for various CPUs.
    local/libpcap 1.0.0-1 (base)
    A system-independent interface for user-level packet capture
    local/libpciaccess 0.10.9-1
    X11 PCI access library
    local/libpng 1.4.1-1
    A collection of routines used to create PNG format graphics files
    local/libpng12 1.2.40-1
    A collection of routines used to create PNG format graphics files
    local/libproxy 0.2.3-1
    A library that provides automatic proxy configuration management
    local/libpurple 2.6.6-1
    IM library extracted from Pidgin
    local/librpcsecgss 0.19-2
    Library for RPCSECGSS support
    local/librsvg 2.26.0-2
    SAX-based renderer for SVG files into a GdkPixbuf
    local/libsasl 2.1.23-2
    Cyrus Simple Authentication Service Layer (SASL) library
    local/libsexy 0.1.11-2
    Doing naughty things to good widgets.
    local/libshout 2.2.2-3
    Library for accessing a shoutcast/icecast server
    local/libsigc++2.0 2.2.4.2-1
    Libsigc++ implements a full callback system for use in widget libraries - V2
    local/libsm 1.1.1-1
    X11 Session Management library
    local/libsndfile 1.0.21-1
    A C library for reading and writing files containing sampled sound
    local/libtasn1 2.4-1
    The ASN.1 library used in GNUTLS
    local/libthai 0.1.14-1
    Thai language support routines
    local/libtheora 1.1.1-1
    An open video codec developed by the Xiph.org
    local/libtiff 3.9.2-2
    Library for manipulation of TIFF images
    local/libtirpc 0.2.1-1
    Transport Independent RPC library (SunRPC replacement)
    local/libtool 2.2.6b-2 (base-devel)
    A generic library support script
    local/libusb 0.1.12-4 (base)
    Library to enable user space application programs to communicate with USB
    devices
    local/libv4l 0.6.4-1
    Userspace library for Video 4 Linux (1 and 2)
    local/libvdpau 0.4-1
    Nvidia VDPAU library
    local/libvisual 0.4.0-2
    Abstraction library that comes between applications and audio visualisation
    plugins
    local/libvorbis 1.2.3-1
    Vorbis codec library
    local/libwmf 0.2.8.4-7
    A library for reading vector images in Microsoft's native Windows Metafile
    Format (WMF).
    local/libwnck 2.28.0-1
    Window Navigator Construction Kit
    local/libwpd 0.8.14-1
    library for importing WordPerfect (tm) documents
    local/libx11 1.3.3-1
    X11 client-side library
    local/libx86 1.1-2
    Provides an lrmi interface that works on x86, am64 and alpha
    local/libxau 1.0.5-1
    X11 authorisation library
    local/libxaw 1.0.7-1
    X11 Athena Widget library
    local/libxcb 1.5-1
    X11 client-side library
    local/libxcomposite 0.4.1-1
    X11 Composite extension library
    local/libxcursor 1.1.10-1
    X cursor management library
    local/libxdamage 1.1.2-1
    X11 damaged region extension library
    local/libxdmcp 1.0.3-1
    X11 Display Manager Control Protocol library
    local/libxext 1.1.1-1
    X11 miscellaneous extensions library
    local/libxfce4menu 4.6.1-1 (xfce4)
    a freedesktop.org compliant menu implementation for Xfce
    local/libxfce4util 4.6.1-1 (xfce4)
    Basic utility non-GUI functions for Xfce
    local/libxfcegui4 4.6.3-1 (xfce4)
    Various gtk widgets for Xfce
    local/libxfixes 4.0.4-1
    X11 miscellaneous 'fixes' extension library
    local/libxfont 1.4.1-1
    X11 font rasterisation library
    local/libxfontcache 1.0.5-1
    X11 font cache library
    local/libxft 2.1.14-1
    FreeType-based font drawing library for X
    local/libxi 1.3-2
    X11 Input extension library
    local/libxinerama 1.1-1
    X11 Xinerama extension library
    local/libxkbfile 1.0.6-1
    X11 keyboard file manipulation library
    local/libxklavier 4.0-1
    High-level API for X Keyboard Extension
    local/libxml2 2.7.6-2
    XML parsing library, version 2
    local/libxmu 1.0.5-1
    X11 miscellaneous micro-utility library
    local/libxpm 3.5.8-1
    X11 pixmap library
    local/libxrandr 1.3.0-1
    X11 RandR extension library
    local/libxrender 0.9.5-1
    X Rendering Extension client library
    local/libxres 1.0.4-1
    X11 Resource extension library
    local/libxslt 1.1.26-1
    XML stylesheet transformation library
    local/libxss 1.2.0-1
    X11 Screen Saver extension library
    local/libxt 1.0.7-1
    X11 toolkit intrinsics library
    local/libxtst 1.1.0-1
    X11 Testing -- Resource extension library
    local/libxv 1.0.5-1
    X11 Video extension library
    local/libxvmc 1.0.5-1
    X11 Video Motion Compensation extension library
    local/libxxf86dga 1.1.1-1
    X11 Direct Graphics Access extension library
    local/libxxf86misc 1.0.2-1
    X11 XFree86 miscellaneous extension library
    local/libxxf86vm 1.1.0-1
    X11 XFree86 video mode extension library
    local/licenses 2.5-1 (base)
    The standard licenses distribution package
    local/links 2.2-3
    A text WWW browser, similar to Lynx
    local/linux-api-headers 2.6.32.5-2 (base)
    Kernel headers sanitized for use in userspace
    local/linux-atm 2.5.0-1
    Drivers and tools to support ATM networking under Linux.
    local/logrotate 3.7.8-1 (base)
    Rotates system logs automatically
    local/lpsolve 5.5.0.15-1
    a Mixed Integer Linear Programming (MILP) solver
    local/lua 5.1.4-4
    A powerful light-weight programming language designed for extending
    applications.
    local/lucene 2.9.2-1
    A high-performance, full-featured text search engine library written
    entirely in Java
    local/lvm2 2.02.60-3 (base)
    Logical Volume Manager 2 utilities
    local/lzo2 2.03-1 (base)
    Portable lossless data compression library written in ANSI C
    local/m4 1.4.14-1 (base-devel)
    m4 macro processor
    local/mach64-dri 7.7-1
    Mesa DRI drivers for ATI Mach64
    local/madwifi 0.9.4.4100-2
    Madwifi drivers for Atheros wireless chipsets. For stock arch 2.6 kernel
    local/madwifi-utils 0.9.4.4096-1
    Userspace tools of madwifi drivers for Atheros wireless chipsets.
    local/mailx 8.1.1-7 (base)
    A commandline utility for sending email
    local/make 3.81-4 (base-devel)
    GNU make utility to maintain groups of programs
    local/man-db 2.5.7-1 (base)
    A utility for reading man pages
    local/man-pages 3.24-1 (base)
    Linux man pages
    local/mcpp 2.7.2-2
    Matsui's CPP implementation precisely conformed to standards
    local/mdadm 3.1.1-2 (base)
    A tool for managing/monitoring Linux md device arrays, also known as
    Software RAID
    local/meliae-svg-icon-theme 1.2-1
    Here you are version n. 1.1 of the new Meliae Icon Theme (all icons are in
    SVG format).
    local/mesa 7.7-1
    Mesa 3-D graphics libraries and include files
    local/mga-dri 7.7-1
    Mesa DRI drivers for Matrox
    local/mkinitcpio 0.6.3-1 (base)
    Modular initramfs image creation utility
    local/mkinitcpio-busybox 1.15.3-5
    base initramfs tools
    local/mlocate 0.22.3-1
    Faster merging drop-in for slocate
    local/mobile-broadband-provider-info 0.20100301-1
    Network Management daemon
    local/module-init-tools 3.11.1-2 (base)
    utilities needed by Linux systems for managing loadable kernel modules
    local/mousepad 0.2.16-2 (xfce4)
    Simple Text Editor for Xfce4 (based on Gedit)
    local/mozilla-common 1.4-1
    Common Initialization Profile for Mozilla.org products
    local/mpfr 2.4.2-1
    multiple-precision floating-point library
    local/ms-sys 2.1.4-2
    A tool to write Win9x/2k/XP/2k3/Vista/7/2k8 master boot records (mbr) under
    linux - RTM!
    local/mtools 4.0.13-1
    A collection of utilities to access MS-DOS disks
    local/nano 2.2.3-1 (base)
    Pico editor clone with enhancements
    local/ncurses 5.7-2 (base)
    System V Release 4.0 curses emulation library
    local/ndiswrapper 1.56-1
    Module for NDIS (Windows Network Drivers) drivers supplied by vendors. For
    stock arch 2.6 kernel.
    local/ndiswrapper-utils 1.56-1
    Binaries for ndiswrapper module
    local/neon 0.28.6-2
    HTTP and WebDAV client library with a C interface
    local/net-tools 1.60-14 (base)
    Configuration tools for Linux networking
    local/network-manager-applet 0.8-2
    GNOME frontends to NetWorkmanager
    local/networkmanager 0.8-1
    Network Management daemon
    local/nfs-utils 1.2.2-1
    Support programs for Network File Systems
    local/nfsidmap 0.23-3
    Library to help mapping IDs, mainly for NFSv4
    local/notification-daemon 0.4.0-4 (gnome)
    Notification daemon for the desktop notifications framework
    local/nspr 4.8.3-1
    Netscape Portable Runtime
    local/nss 3.12.4-2
    Mozilla Network Security Services
    local/ntfs-3g 2010.1.16-1
    Stable read and write NTFS driver
    local/ntfsprogs 2.0.0-4
    NTFS filesystem utilities
    local/opencore-amr 0.1.2-1
    Open source implementation of the Adaptive Multi Rate (AMR) speech codec
    local/openexr 1.6.1-1
    openexr library for EXR images
    local/openjdk6 6.b17_1.7.1-1
    Free Java environment based on OpenJDK 6.0 with IcedTea6 replacing binary
    plugs.
    local/openntpd 3.9p1-10
    Free, easy to use implementation of the Network Time Protocol.
    local/openoffice-base 3.2.0-1
    OpenOffice.org - a free multiplatform and multilingual office suite -
    testing branch leeding to next stable release
    local/openssh 5.3p1-4
    A Secure SHell server/client
    local/openssl 0.9.8m-2
    The Open Source toolkit for Secure Sockets Layer and Transport Layer
    Security
    local/ophcrack 3.3.1-4
    A free Windows password cracker based on rainbow tables
    local/orage 4.6.1-1 (xfce4)
    A simple calendar application with reminders for Xfce
    local/orbit2 2.14.17-1
    Thin/fast CORBA ORB
    local/pacman 3.3.3-1 (base)
    A library-based package manager with dependency support
    local/pacman-color 3.3.3-1
    Command-line frontend for libalpm aka pacman with color patch
    local/pacman-mirrorlist 20100131-1 (base)
    Arch Linux mirror list for use by pacman
    local/pam 1.1.1-1 (base)
    PAM (Pluggable Authentication Modules) library
    local/pango 1.26.2-1
    A library for layout and rendering of text
    local/pangomm 2.26.0-1
    C++ bindings for pango
    local/parted 2.2-1
    A program for creating, destroying, resizing, checking and copying
    partitions
    local/patch 2.6.1-1 (base-devel)
    A utility to apply patch files to original sources
    local/pciutils 3.1.7-1 (base)
    PCI bus configuration space access library and tools
    local/pcmciautils 016-1 (base)
    Utilities for inserting and removing PCMCIA cards
    local/pcre 8.01-1 (base)
    A library that implements Perl 5-style regular expressions
    local/perl 5.10.1-5 (base)
    Practical Extraction and Report Language
    local/perl-error 0.17016-1
    Perl/CPAN Error module - Error/exception handling in an OO-ish way
    local/perl-locale-gettext 1.05-5
    Permits access from Perl to the gettext() family of functions.
    local/perl-xml-simple 2.18-2
    Simple XML parser for perl
    local/perlxml 2.36-2
    XML::Parser - an XML parser module for perl
    local/pidgin 2.6.6-1
    Multi-protocol instant messaging client
    local/pidgin-facebookchat 1.64-1
    Facebook chat plugin for Pidgin and libpurple messengers.
    local/pixman 0.16.6-1
    Pixman library
    local/pkgconfig 0.23-1 (base-devel)
    A system for managing library compile/link flags
    local/pkgtools 17-1
    A collection of scripts for Arch Linux packages
    local/pm-utils 1.2.6.1-4
    Utilities and scripts for suspend and hibernate power management
    local/polkit 0.96-2
    Application development toolkit for controlling system-wide privileges
    local/polkit-gnome 0.96-3
    PolicyKit integration for the GNOME desktop
    local/popt 1.15-1 (base)
    A commandline option parser
    local/postgresql-libs 8.4.2-4
    Libraries for use with PostgreSQL
    local/ppl 0.10.2-2
    A modern library for convex polyhedra and other numerical abstractions.
    local/ppp 2.4.5-1 (base)
    A daemon which implements the PPP protocol for dial-up networking
    local/preload 0.6.4-2
    Makes applications run faster by prefetching binaries and shared objects
    local/procinfo 19-3 (base)
    Displays useful information from /proc
    local/procps 3.2.8-1 (base)
    Utilities for monitoring your system and processes on your system
    local/psmisc 22.10-1 (base)
    Miscellaneous procfs tools
    local/psutils 1.17-2
    A set of postscript utilities
    local/pycairo 1.8.8-1
    Python bindings for the cairo graphics library
    local/pygobject 2.20.0-1
    Python bindings for GObject
    local/pygtk 2.16.0-2
    Python bindings for the GTK widget set
    local/python 2.6.5-1
    A high-level scripting language
    local/python-mpd 0.2.1-2
    Python MPD client library
    local/qt 4.6.2-1
    A cross-platform application and UI framework
    local/qwt 5.2.0-2
    Qt Widgets for Technical Applications
    local/r128-dri 7.7-1
    Mesa DRI drivers for ATI Rage128
    local/randrproto 1.3.1-1
    X11 RandR extension wire protocol
    local/raptor 1.4.21-1
    A C library that parses RDF/XML/N-Triples into RDF triples
    local/rasqal 0.9.19-1
    a free C library that handles Resource Description Framework (RDF) query
    syntaxes, query construction and query execution returning result bindings
    local/readline 6.1.002-1
    GNU readline library
    local/recode 3.6-3
    Converts files between various character sets and usages
    local/recordproto 1.14-1
    X11 Record extension wire protocol
    local/redland 1.0.10-2
    Library that provides a high-level interface to RDF data
    local/reiserfsprogs 3.6.21-2 (base)
    Reiserfs utilities
    local/renderproto 0.11-1
    X11 Render extension wire protocol
    local/rp-pppoe 3.10-4 (base)
    Roaring Penguin's Point-to-Point Protocol over Ethernet client
    local/rpcbind 0.2.0-1
    portmap replacement which supports RPC over various protocols
    local/run-parts 3.2.2-1
    run scripts or programs in a directory
    local/savage-dri 7.7-1
    Mesa DRI drivers for S3 Sraphics/VIA Savage
    local/saxon 9.2.0.6-1
    XSLT 2.0 / XPath 2.0 / XQuery 1.0 processor for Java - the open source Home
    Edition
    local/scrnsaverproto 1.2.0-1
    X11 Screen Saver extension wire protocol
    local/sdl 1.2.14-1
    A library for portable low-level access to a video framebuffer, audio
    output, mouse, and keyboard
    local/sdl_gfx 2.0.20-1
    SDL Graphic Primitives
    local/sdl_image 1.2.10-2
    A simple library to load images of various formats as SDL surfaces
    local/sdl_mixer 1.2.11-2
    A simple multi-channel audio mixer
    local/sdl_net 1.2.7-3
    A small sample cross-platform networking library
    local/sdl_pango 0.1.2-2
    Pango SDL binding
    local/sdl_perl 2.2.6-3
    A Perl wrapper for SDL
    local/sdl_ttf 2.0.9-2
    A library that allows you to use TrueType fonts in your SDL applications
    local/sdparm 1.04-1 (base)
    An utility similar to hdparm but for SCSI devices
    local/sed 4.2.1-1 (base)
    GNU stream editor
    local/shadow 4.1.4.2-2 (base)
    Shadow password file utilities
    local/shared-mime-info 0.71-1
    Freedesktop.org Shared MIME Info
    local/silc-toolkit 1.1.10-1
    Toolkit for Secure Internet Live Conferencing
    local/sis-dri 7.7-1
    Mesa DRI drivers for SiS
    local/smbclient 3.5.1-1
    Tools to access a server's filespace and printers via SMB
    local/smpeg 0.4.4-5
    SDL MPEG Player Library
    local/sonata 1.6.2.1-1
    Elegant GTK+ music client for MPD
    local/speex 1.2rc1-1.1
    A free codec for free speech
    local/sqlite3 3.6.22-1
    A C library that implements an SQL database engine
    local/squeeze 0.2.3-2 (xfce4)
    Squeeze is a modern and advanced archive manager for the Xfce Desktop
    Environment.
    local/startup-notification 0.10-1
    Monitor and display application startup
    local/sudo 1.7.2p5-1
    Give certain users the ability to run some commands as root
    local/sysfsutils 2.1.0-5 (base)
    System Utilities Based on Sysfs
    local/syslog-ng 3.0.4-3 (base)
    Next-generation syslogd with advanced networking and filtering capabilities
    local/sysvinit 2.86-5 (base)
    Linux System V Init
    local/taglib 1.6.1-1
    library for reading and editing the meta-data of several popular audio
    formats.
    local/talloc 2.0.1-1
    talloc is a hierarchical pool based memory allocator with destructors
    local/tar 1.23-1 (base)
    Utility used to store, backup, and transport files
    local/tcp_wrappers 7.6-11 (base)
    Monitors and Controls incoming TCP connections
    local/tdb 1.2.1-1
    A Trivia Database similar to GDBM but allows simultaneous commits
    local/tdfx-dri 7.7-1
    Mesa DRI drivers for 3dfx
    local/terminal 0.4.4-1 (xfce4)
    A modern terminal emulator primarly for the Xfce desktop environment
    local/texinfo 4.13a-3 (base)
    Utilities to work with and produce manuals, ASCII text, and on-line
    documentation from a single source file
    local/thunar 1.0.1-5 (xfce4)
    new modern file manager for Xfce
    local/ttf-dejavu 2.30-2
    Font family based on the Bitstream Vera Fonts with a wider range of
    characters
    local/ttf-freefont 20090104-2
    A set of free high-quality TrueType fonts covering the UCS character set
    local/ttf-ms-fonts 2.0-2
    Core TTF Fonts from Microsoft
    local/ttf-vista-fonts 1-3
    Microsoft Vista True Type Fonts
    local/tzdata 2010e-1
    Sources for time zone and daylight saving time data
    local/udev 151-3 (base)
    The userspace dev tools (udev)
    local/unixodbc 2.2.14-2
    ODBC is an open specification for providing application developers with a
    predictable API with which to access Data Sources
    local/unzip 6.0-5
    Unpacks .zip archives such as those made by PKZIP
    local/usbutils 0.86-2 (base)
    USB Device Utilities
    local/util-linux-ng 2.17.1-1 (base)
    Miscellaneous system utilities for Linux
    local/vbetool 1.1-1
    vbetool uses lrmi in order to run code from the video BIOS
    local/vi 050325-3 (base)
    The original ex/vi text editor.
    local/videoproto 2.3.0-1
    X11 Video extension wire protocol
    local/vigra 1.6.0-2
    Computer vision library
    local/vim 7.2.385-1
    Vi Improved, a highly configurable, improved version of the vi text editor
    local/virtualbox_bin 3.1.4-3
    Powerful x86 virtualization (Personal Use Binaries Edition).
    local/vlc 1.0.5-5
    A multi-platform MPEG, VCD/DVD, and DivX player
    local/vte 0.22.5-1
    Virtual Terminal Emulator library
    local/wget 1.12-1 (base)
    A network utility to retrieve files from the Web
    local/which 2.20-2 (base)
    A utility to show the full path of commands
    local/wine 1.1.41-1
    A compatibility layer for running Windows programs
    local/wireless_tools 29-3
    Wireless Tools
    local/wpa_supplicant 0.6.10-1 (base)
    A utility providing key negotiation for WPA wireless networks
    local/x264 20100312-1
    free library for encoding H264/AVC video streams
    local/xbitmaps 1.1.0-1
    X.org Bitmap files
    local/xcb-proto 1.6-1
    XML-XCB protocol descriptions
    local/xcb-util 0.3.6-1
    Utility libraries for XC Binding
    local/xchat 2.8.6-5
    A GTK+ based IRC client
    local/xcursor-themes 1.0.2-1
    X.org Cursor themes
    local/xcursor-vanilla-dmz-aa 0.4-5
    Vanilla DMZ AA cursor theme
    local/xdg-utils 1.0.2.20100303-1
    Command line tools that assist applications with a variety of desktop
    integration tasks.
    local/xextproto 7.1.1-1
    X11 various extension wire protocol
    local/xf86-input-evdev 2.3.2-1 (xorg-input-drivers)
    X.org evdev input driver
    local/xf86-input-synaptics 1.2.1-1 (xorg-input-drivers)
    synaptics driver for notebook touchpads
    local/xf86-video-apm 1.2.2-2 (xorg-video-drivers)
    X.org Alliance ProMotion video driver
    local/xf86-video-ark 0.7.2-1 (xorg-video-drivers)
    X.org ark video driver
    local/xf86-video-ati 6.12.4-3 (xorg-video-drivers)
    X.org ati video driver
    local/xf86-video-chips 1.2.2-2 (xorg-video-drivers)
    X.org Chips and Technologies video driver
    local/xf86-video-cirrus 1.3.2-2 (xorg-video-drivers)
    X.org Cirrus Logic video driver
    local/xf86-video-dummy 0.3.2-2 (xorg-video-drivers)
    X.org dummy video driver
    local/xf86-video-fbdev 0.4.1-2 (xorg-video-drivers)
    X.org framebuffer video driver
    local/xf86-video-geode 2.11.6-1 (xorg-video-drivers)
    X.org AMD/Geode LX & NX video driver
    local/xf86-video-glint 1.2.4-2 (xorg-video-drivers)
    X.org GLINT/Permedia video driver
    local/xf86-video-i128 1.3.3-2 (xorg-video-drivers)
    X.org Number 9 I128 video driver
    local/xf86-video-i740 1.3.2-2 (xorg-video-drivers)
    X.org Intel i740 video driver
    local/xf86-video-intel 2.10.0-1 (xorg-video-drivers)
    X.org Intel i810/i830/i915/945G/G965+ video drivers
    local/xf86-video-mach64 6.8.2-2 (xorg-video-drivers)
    X.org mach64 video driver
    local/xf86-video-mga 1.4.11-2 (xorg-video-drivers)
    X.org mga video driver
    local/xf86-video-neomagic 1.2.4-3 (xorg-video-drivers)
    X.org neomagic video driver
    local/xf86-video-nv 2.1.17-1 (xorg-video-drivers)
    X.org nv video driver
    local/xf86-video-r128 6.8.1-2 (xorg-video-drivers)
    X.org ati Rage128 video driver
    local/xf86-video-radeonhd 1.3.0-1 (xorg-video-drivers)
    Experimental Radeon HD video driver for r500 and r600 ATI cards
    local/xf86-video-rendition 4.2.3-1 (xorg-video-drivers)
    X.org Rendition video driver
    local/xf86-video-s3 0.6.3-1 (xorg-video-drivers)
    X.org S3 video driver
    local/xf86-video-s3virge 1.10.3-1 (xorg-video-drivers)
    X.org S3 Virge video driver
    local/xf86-video-savage 2.3.1-2 (xorg-video-drivers)
    X.org savage video driver
    local/xf86-video-siliconmotion 1.7.3-2 (xorg-video-drivers)
    X.org siliconmotion video driver
    local/xf86-video-sis 0.10.2-3 (xorg-video-drivers)
    X.org SiS video driver
    local/xf86-video-sisusb 0.9.3-1 (xorg-video-drivers)
    X.org SiS USB video driver
    local/xf86-video-tdfx 1.4.3-2 (xorg-video-drivers)
    X.org tdfx video driver
    local/xf86-video-trident 1.3.3-3 (xorg-video-drivers)
    X.org Trident video driver
    local/xf86-video-tseng 1.2.3-1 (xorg-video-drivers)
    X.org tseng video driver
    local/xf86-video-v4l 0.2.0-4 (xorg-video-drivers)
    X.org v4l video driver
    local/xf86-video-vesa 2.2.1-1 (xorg xorg-video-drivers)
    X.org vesa video driver
    local/xf86-video-vmware 10.16.9-1 (xorg-video-drivers)
    X.org vmware video driver
    local/xf86-video-voodoo 1.2.3-1 (xorg-video-drivers)
    X.org 3dfx Voodoo1/Voodoo2 2D video driver
    local/xf86dgaproto 2.1-1
    X11 Direct Graphics Access extension wire protocol
    local/xf86miscproto 0.9.3-1
    X11 XFree86-Miscellaneous extension wire protocol
    local/xf86vidmodeproto 2.3-1
    X11 Video Mode extension wire protocol
    local/xfce-utils 4.6.1-2 (xfce4)
    Utilities for Xfce
    local/xfce4-appfinder 4.6.1-2 (xfce4)
    Xfce application finder
    local/xfce4-battery-plugin 0.5.1-2 (xfce4-goodies)
    A battery monitor plugin for the Xfce panel
    local/xfce4-diskperf-plugin 2.1.0-5 (xfce4-goodies)
    Plugin for the Xfce4 panel displaying instant disk/partition performance
    local/xfce4-icon-theme 4.4.3-1 (xfce4)
    A set of icon themes for the Xfce window manager
    local/xfce4-mixer 4.6.1-1 (xfce4)
    The volume control plugin for the Xfce panel
    local/xfce4-panel 4.6.3-1 (xfce4)
    Panel for the Xfce desktop environment
    local/xfce4-session 4.6.1-1 (xfce4)
    A session manager for Xfce
    local/xfce4-settings 4.6.4-1 (xfce4)
    Settings manager for xfce
    local/xfconf 4.6.1-3 (xfce4)
    xfconf.. thingie
    local/xfdesktop 4.6.1-1 (xfce4)
    A desktop manager for Xfce
    local/xfprint 4.6.1-2 (xfce4)
    A print dialog and a printer manager for Xfce
    local/xfsprogs 3.1.1-1 (base)
    XFS filesystem utilities
    local/xfwm4 4.6.1-1 (xfce4)
    Xfce window manager, compatible with Gnome, Gnome2, KDE2, and KDE3
    local/xfwm4-themes 4.6.0-1 (xfce4)
    A set of additionnal themes for the Xfce window manager
    local/xineramaproto 1.2-1
    X11 Xinerama extension wire protocol
    local/xkeyboard-config 1.8-1
    X keyboard configuration files
    local/xorg-apps 7.5-3
    Various X.Org applications
    local/xorg-docs 1.5-1 (xorg)
    X.org documentations
    local/xorg-font-utils 7.5-2
    X.Org font utilities
    local/xorg-fonts-100dpi 1.0.1-3 (xorg)
    X.org 100dpi fonts
    local/xorg-fonts-75dpi 1.0.1-3 (xorg)
    X.org 75dpi fonts
    local/xorg-fonts-alias 1.0.2-1
    X.org font alias files
    local/xorg-fonts-encodings 1.0.3-1
    X.org font encoding files
    local/xorg-fonts-misc 1.0.1-1
    X.org misc fonts
    local/xorg-res-utils 1.0.3-3 (xorg)
    X.Org X11 resource utilities
    local/xorg-server 1.7.5.902-1 (xorg)
    X.Org X servers
    local/xorg-server-utils 7.5-3 (xorg)
    X.Org utilities required by xorg-server
    local/xorg-twm 1.0.4-3 (xorg)
    Tab Window Manager for the X Window System
    local/xorg-utils 7.6-1 (xorg)
    Collection of client utilities used to query the X server
    local/xorg-xauth 1.0.4-1
    X.Org authorization settings program
    local/xorg-xinit 1.2.0-1 (xorg)
    X.Org initialisation program
    local/xorg-xkb-utils 7.5-2
    X.org keyboard utilities
    local/xproto 7.0.16-1
    X11 core wire protocol and auxiliary headers
    local/xsel 1.2.0-1
    XSel is a command-line program for getting and setting the contents of the X
    selection
    local/xterm 255-1 (xorg)
    X Terminal Emulator
    local/xvidcore 1.2.2-1
    XviD is an open source MPEG-4 video codec
    local/xz-utils 4.999.9beta-2
    utils for managing LZMA and XZ compressed files
    local/yaourt-git 20100319-1
    A pacman wrapper with extended features and AUR support
    local/zd1211-firmware 1.4-3
    Firmware for the in-kernel26 zd1211rw wireless driver
    local/zlib 1.2.4-1
    Compression library implementing the deflate compression method found in
    gzip and PKZIP
    local/zvbi 0.2.33-2
    VBI capture and decoding library
    Output of lsmod
    Module Size Used by
    nls_cp437 4513 1
    vfat 8348 1
    fat 43888 1 vfat
    ipv6 237596 22
    snd_hda_codec_analog 51443 1
    i915 267595 2
    drm_kms_helper 21971 1 i915
    i2c_i801 7122 0
    drm 126556 3 i915,drm_kms_helper
    i2c_algo_bit 4219 1 i915
    ndiswrapper 172796 0
    usbhid 33579 0
    hid 61085 1 usbhid
    i2c_core 15369 4 i915,i2c_i801,drm,i2c_algo_bit
    iTCO_wdt 7577 0
    ppdev 4882 0
    lp 6616 0
    video 14871 1 i915
    e1000e 112803 0
    ide_pci_generic 2008 0
    button 3638 1 i915
    iTCO_vendor_support 1453 1 iTCO_wdt
    output 1404 1 video
    ide_core 76951 1 ide_pci_generic
    intel_agp 23225 1
    agpgart 23331 2 drm,intel_agp
    processor 26526 2
    dcdbas 4440 0
    thermal 9326 0
    sg 21079 0
    psmouse 56309 0
    serio_raw 3620 0
    snd_seq_dummy 1099 0
    snd_seq_oss 25304 0
    snd_seq_midi_event 4452 1 snd_seq_oss
    snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_hda_intel 18985 0
    snd_pcm_oss 33693 0
    snd_mixer_oss 14810 1 snd_pcm_oss
    snd_hda_codec 56728 2 snd_hda_codec_analog,snd_hda_intel
    parport_pc 27680 1
    snd_hwdep 5102 1 snd_hda_codec
    snd_pcm 57351 3 snd_hda_intel,snd_pcm_oss,snd_hda_codec
    parport 26575 3 ppdev,lp,parport_pc
    snd_timer 16117 2 snd_seq,snd_pcm
    pcspkr 1347 0
    evdev 6970 8
    snd 43847 11 snd_hda_codec_analog,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    soundcore 5007 1 snd
    snd_page_alloc 5841 2 snd_hda_intel,snd_pcm
    loop 11399 0
    rtc_cmos 7504 0
    rtc_core 12011 1 rtc_cmos
    rtc_lib 1450 1 rtc_core
    ext2 56463 1
    mbcache 4278 1 ext2
    sr_mod 13161 0
    cdrom 31625 1 sr_mod
    sd_mod 24101 3
    usb_storage 34006 2
    pata_acpi 2264 0
    ata_generic 2235 0
    ata_piix 17725 0
    uhci_hcd 19156 0
    libata 135579 3 pata_acpi,ata_generic,ata_piix
    scsi_mod 78933 5 sg,sr_mod,sd_mod,usb_storage,libata
    ehci_hcd 31594 0
    usbcore 118921 6 ndiswrapper,usbhid,usb_storage,uhci_hcd,ehci_hcd

  • Confused about polkit-gnome and lxpolkit [solved]

    I recently updated and new version of goffice and gnumeric came down with this warning:
    ==> The agent is no longer autostarted by default except in GNOME Flashback.
    For Xfce, LXDE etc., "lxpolkit" is the suggested lightweight alternative.
    See https://wiki.archlinux.org/index.php/Polkit#Authentication_agents for
    more details.
    I use xfce4 and do not know gnome-polkit installed at all. I removed it and pacman did not complain about dependencies. What exactly do I need lxpolkit for? I am able to use sudo without it.
    Last edited by maggie (2013-09-16 15:40:49)

    I'am confused too:
    Using lxde I was not even aware that there is an alternative to polkit-gnome, as it is always
    mentioned as quasi dependend on gvfs:
    The gvfs package needs to be installed, along with polkit-gnome for the polkit rules.
    This seems to be wrong as neither gvfs nor the polkit rules do depend on polkit-gnome authentication-agent in any way.
    Informations through the wiki(s) are very inconsistent!
    From LXDE-Page:
    polkit-gnome provides an authentication and will need to be started on login:
    $ mkdir -p ~/.config/autostart
    $ cp /etc/xdg/autostart/polkit-gnome-authentication-agent-1.desktop ~/.config/autostart
    What is it good for? Is there any reason to start it twice? The file mentioned is installed at '/usr/share/applications/polkit-gnome-authentication-agent-1.desktop' by default.
    Polkit-Page:
    To autostart it everywhere except in GNOME and KDE, copy the file /usr/share/applications/polkit-gnome-authentication-agent-1.desktop to /etc/xdg/autostart/
    LXDE-Wiki:
    gvfs and its dependencies (optional, but highly recommended):
    policykit-gnome (required for authentication for volume management)
    And last but not least the awareness that the LX alternative exists since March 28th, 2010 where PCMan himself told us polkit-gnome is not needed anymore:
    LXPOLKIT – SIMPLE POLICYKIT AUTHENTICATION AGENT:
    Generally when one needs to use policykit, he or she needs to install policykit-gnome. Now we have our own.
    A new component LXPolkit was added. It’s minimal policykit  authentication agent.
    As far as I get it, polkit-gnome only provides the 'query of password window' and can be replaced by lxpolkit which is more lightweight.
    And as it was never 'auto'started (see above) except in GNOME, the pacman.log message is IMHO highly questionable and confusing.

  • [SOLVED] Strange behaviour of gnome-terminal and xterm

    Hello,
    I've been on Archlinux for 2 days, and I have a strange problem with gnome-terminal and xterm. When I write a too long command on a line, the text continues from the beginning of this line erasing the text, instead of going to a new line. Do you have any idea of how to fix that?
    Thanks a lot!
    Last edited by crotte (2008-04-13 21:59:34)

    Seems to be in a fresh install, too. I didn't change any setting of bash and no PS1.
    I still can't reproduce it... I hate those errors. :-(
    Edit:
    Fixed by using zsh now.
    Last edited by Misery (2008-05-16 08:48:44)

Maybe you are looking for

  • The Apple Id on my phone is not correct. How do I change it?

    When I go to download an app, the Apple ID on my phone is not correct. How do I change it?

  • Problem selecting linked images in CS5

    Just changed to InDesign CS5 and find, on working on a document created in CS4, I can't select images (which were links created inPhotoshop). The only things I can select are objects that I had created in InDesign itself. Why?

  • Links between Photoshop/Illustrator/InDesign CS2 files

    I create files in Photoshop CS2 and place them in InDesign CS2 files. Is there a way in Bridge (or elsewhere) to see which InDesign files a specific Photoshop file is linked to? Your help is appreciated. MJ

  • Remove redundant SMTP addresses from Mailboxes

    Hi, I have to bulk edit some mailboxes which should have mydomain.com and mydomain.mail.onmicrosoft.com (and any other verified domains) We have some mailboxes that have [email protected] and [email protected] and [email protected]. this is the same

  • ZENGINKYO Electronic Bank Statement format-Japan

    Hi, I am looking for format for ZENGINKYO bank statement for Japans Client. I have an implementation in Japan where bank would be providing ZENGINKYO format and can contain Japanese characters. i am quiet not sure how it works in SAP. Any help is rea