Strange lenovo power menager behavior in vista

i ran lenovo g530 (4446) vista
after reading here about PM -i noticed i do not have such lenovo PM tab at all & no options as here:
http://img41.imageshack.us/img41/736/pmsettings.png
i googled & found this photo simillar to mine-(please look only at the power option tab)
http://brian.geary.smith.googlepages.com/desktop-lenovo.jpg
, but i do not have (as on the left part of the power option tab)- 2 red circles ( power manager & battery info.) i've only the 3rd red circle(buy a battery). i do have lenovo power plans as in the photo.
in my pc i also do not have the green battery mark on the task bar....
i've PM driver installed in my pc.
1-whats wrong?
2- why i do not have the 2 red circles ( power manager & battery info.)
3-How to fix it -to get lenovo PM tab ?
Lenovo G530 4446-24G
had vista and now win7 32bit

Hi Herik
thanks for your answer,
but i think your answers does support ThinkPad and not pc Lenovo G530 4446-24G.
http://www-307.ibm.com/pc/support/site.wss/quickPath.do?quickPathEntry=444624G
for e.g. power manager to my pc is this one (and it is installed in my pc)
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-71008
and you wrote me this one :
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70601
so are all other drivers you wrote.
Herik -did you test the issue in pc Lenovo G530 4446-24G specifically?
i found a Downloads and drivers for my pc here
http://www-307.ibm.com/pc/support/site.wss/product.do?subcategoryind=0&familyind=430819&brandind=10&...
and none of the drivers you wrote are in the list, except PM.
**may be in G530 specifically there shouldn't be a separate lenovo PM tab at all?
thanks
Lenovo G530 4446-24G
had vista and now win7 32bit

Similar Messages

Can't uninstall Lenovo Power Manager in Windows 8 - upgraded from Windows 7

Hi all, I recently purchased a Lenovo X230. It was preloaded with Windows 7 Home Premium. I upgraded this system to Windows 8 Pro without any problems.
I noticed that Windows 8 Pro has some issues with the Lenovo Power Manager, which after perusing this forum seems to be pretty incompatible with Windows 8. I am trying to uninstall the Power Manager in the Control Panel, but I can't find the application to install. I only see an option to uninstall the Lenovo Power Management Driver. Does anyone know how I can uninstall the entire Lenovo Power Manager from my system?

Backstory: I installed the Power Manager on a clean installation of Windows 8 by setting it to Windows 7 Compatibility Mode. It seemed to be working swimmingly, until the next day when I tried to use it and discovered that it would always crash on start-up. Unfortunate. I naively attempted to correct this problem by uninstalling and reinstalling the application. Strangely, I was able to successfully uninstall the program using the Add/Remove Programs Control Panel and then reinstall the program. But, despite the reinstallation the problem persisted and I tried to uninstall the program again. It would not uninstall, claiming the installer wasn't compatible with my system.
Fix: Run "C:\Program Files (x86)\InstallShield Installation Information\{DAC01CEE-5BAE-42D5-81FC-B687E84E8405}\Setup.exe" -l0x9 -AddRemove from an administrative command prompt. This should completely remove Power Manager and it's entry in the Add/Remove Programs console. The GUID may be different if you were not using the most recent version of Power Manager, I installed 6.36. The additional power plans that it originally installed are still in the Windows Power control panel.
I am still wrestling with the Power Manager to get it working somewhat reliably on Windows 8. I am very disappointed that this level of effort is required on a new system that is Windows 8 compliant.

Power Manager for Windows Vista - ThinkPad

The link show the update is for a T61p, running Vist,
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70601
But once the download is done, the system refuses to install the v2.50 - why is that ?
The pc is aT61p, vista Ult., with PMgt 2.3.

Hi Ran,
Thanks!
I haven't tried it yet.
In the meantime i did more testing and found out that even with only Power Manager version 2.41a installed the latest Intel Pro wireless driver also supported by lenovo is not stabel and FN-F5 or windows network connection also fails to switch the radio back on after a reboot when the radio has been turned off first ;-(
Reading http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67283
over and over I decide to revert back to the old Intel wireless driver listed on this page.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67256
Reinstalled ThinkVantage Access Connections for Window Vista version 5.12
I tested it again........ IT WORKS!!!
Please try this combination:
BIOS Version: 1.15
Bluetooth with Enhanced Data Rate Software II for Windows Vista Version: 6.2.0.5000
ThinkVantage Active Protection System for Windows Vista 32-bit, XP, 2000 Version: 1.62
ThinkPad Power Management driver for Windows Vista, XP, 2000, Me, 98 SE Version: 1.52
ThinkVantage Productivity Center Pack Version: 3.02
Power Manager for Windows Vista Version: 2.41a
ThinkVantage Access Connections for Windows Vista Version 5.12 !!
Intel Wireless LAN (11abgn, abg, bg) for Windows Vista 11.05.0 API
Regards,
Ritchy
Message Edited by Ritchy on 01-14-2009 11:56 PM

Lenovo Power Dial software

Where is the default software for reload, I want to reload the power dial software.
The system has the Lenovo driver CD and a Lenovo recovery DVD with Vista. I only want to add the power dial software, not do a system restore to Lenovo factory default.
Thanks.
R

Dang, I did the same and killed the only place for the backup which of course I did not back up. Smart as @ customer support of course say you should have called us first...... HMMMMMMM so now I too am looking for the software LVT Menu Mode Switch 2.0; Driver& Application Auto-Installation; Intel® Viiv .
Again customer service was no help.
Any takers out there want to help?
[email protected]
Thanks.
BTW I did format the drive to a single C: and clean install. except for the lost software. I will post a warning for all .
Lenovo 3000K100 Intel Core2 Quad Vista Home Premium BFG 8800GT-OC 512MB PCIe 500GB SATA HD 4GB PC-5300 DDR2 DVD +/- RW DL x2 SATA Creative X-FI Pro + Mods

Lenovo Power Manager in Windows 8

Hi guys,
Since Lenovo Power Manager is not available for Windows 8 (no matter my laptop is specified to be FOR Windows 8... grrrrr...) I've been playing around because I needed not the infamous power gauge taking space in my taskbar, but some advanced settings.
Well, I found a couple of things:
Power Manager (g6u432ww.exe) can be installed in Windows 8 and can be used. Even the power gauge.
To install it, you have to run the setup in Windows 7 compatibility mode.
It doesn't work very well: sometimes it crashes or the UI won't open (at doesn't open anymore, no matter what you do). But it does run the first time (use it before restarting) and you can change battery settings and some other stuff anyway.
Do create a Restore Point before, because is not created automatically and because you won't be able to uninstall it later, since the setup expects Windows 7.
If you install Lenovo Settings Dependency Package (gfsd02ww.exe) after that, Power Manager gets upgraded from version 6.36 to 7.11. But still crashes.
Settings regarding battery charging are kept, no matter you restore Windows using system restore. So you can create a Restore Point, install Power Manager, change battery settings, and then restore Windows.
Is not a solution (I'm still expecting for Lenovo to fix this support for Windows 8). But at least I was able to stop the battery from charging all the time.
This has been tested on a ThinkPad Edge S430.
One important question left is:
Why Lenovo Power Manager 7.11 can't be downloaded and installed normally? I couldn't care less for the Metro Store Apps and bulky gadgets. But I want to be able to change some settings.
Cheers.
If I helped you, please give me some kudos! ^^

There's a stickied thread at the top of this board which explains / discusses ThinkPad software for Windows 8, hopefully the information you are looking for is there.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Strange multiply blend mode behavior.

Hi,
i am working on a project and i am surprised to find a strange multiply blend mode behavior.
When i open a new blank document to try again the multiply behavior, all seems to work well.
Is it possible that the document i am working on became corrupted ?
I work on a 2012 Macbook Pro Retina 15", Mac OS X 10.8.5 and Photoshop CC 14.1.2.
This is what i see :
- Normal blen mode.
- Multiply blend mode.
Thank you for the help
Regards.

Ok, i found the solution by chance but it raises new questions.
I stayed on the same document (because i thought that it could be corrupted) but made all the layers invisibles.
I created a first Color Fill layer filled with 50% grey (as background) and just above an other Color Fill layer filled with white (as white paint).
So i masked all the white color fill layer and just made 2 stokes.
In normal mode, i got this which is normal.
So, i chose the multiply blend mode and got this (which is again normal).
P.S. : i am writing the end of the post in a second post because i am having problem to post screenshot...

K430/K450: here`s the SOLUTION to Lenovo Power control switch not working anymore.

If your power control switch isn`t working anymore BUT you didn`t unistall it or erase some of his files, chances are that over time some software/update took control of some setting used by the Lenovo switch.
If this is the case, before reinstalling the software, try the following:
1 - Check your power plan option, if is on something else than Lenovo change your power plan option (scheme) to Lenovo Power Scheme.
2 - Access your pc advanced startup setting (win+x) check for the services LitModeCtrl and LenovoComService and set the two services to automatically start when the computer startsup. If it`s not working 99% is because some software (the most common is Samsung SSD Magician) has set the two to "Manual". Change to "Auto".
3 - Reboot and the Power control switch software will be working again.
I wonder why no one from Lenovo advice this, but i`ve had to find a solution myself after countless hit & miss attempts.

hi FlashOfLight,
Welcome to the Forums.
Have you tried performing a system restore to undo the changes? (by default, this feature is set to enabled)
regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo power manager for windows 8 - installation freezes

I installed Lenovo Power Management Driver (file: 7xua14ww.exe) and I would like to install also Power Manager utility (file: 7xua14ww.exe) but I always get this message:
"A more recent version of the program has been detected in the destination you have selected. If you continue, your previous installation will be overwritten. Do you want to continue?"
When I press yes installation bar opens but does not move and installation freezes.
Can somebody help me? Thanks a lot.
P.S.. I´m using Thinkpad E530 with Windows 8 Home (64)
Solved!
Go to Solution.

Why do you want to install that on your ThinkPad? It's for ThinkCentre desktop computers, not ThinkPad laptops.
I have Power Manager running fine on my X220, as I mentioned above.
jason404 - X220 (my sixth ThinkPad)

Installing Lenovo Power Management

I was wondering if anyone knew if it was possible to install Lenovo Power Management that comes with the U400. I was on the phone with technical support and they recommended me to uninstall that software in order to fix another issue I was having. To no avail the problem still exists but I lost out on the power management software. Does anyone know where/if I can find this software? I have looked everywhere for it.
Thanks
Solved!
Go to Solution.

Hi Pacman,
please download Lenovo Energy Management Driver for Power Management
from IdeaPad U400 Drivers & Downloads...
http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=301264
Zehn

Lenovo U350. Upgrade Windows Vista to 7

Hi all!
Last week I bought Lenovo U350 notebook with Windows Vista OS. And now I want upgrade it to Windows 7.
But I have some questions... especially about the drivers. Here (official Lenovo site) we can see list of drivers for Lenovo notebooks. But I can't find Windows 7 drivers for example for chipset and bluetooth...
Where I can find these drivers?
Thanks a lot!

it's kinda old post, so, download page for u350 has been updated. you can download drivers for windows 7.

T430 unable to sleep with Lenovo Power Manager installed

I have a T430 with Windows 8 installed with the latest BIOS and Lenovo Power Manager installed, and anytime I try to put the computer to sleep(with Fn+F4 or lid close), the laptop enters a stage where the screen is black and the fan continues to run. There's no way to interact/escape this except for holding down the power button.
After uninstalling Lenovo Power Manager, the sleep function works again, but the Mic Mute and caps-lock on screen display stop working in addition to the LED in the MicMute refusing to light up.
Is there any fix to this?

I'm having the same problem. I've tried all the updates and still have the problem. Sometimes it will sleep, other times it won't. Sometimes when it is trying to sleep I get a bluescreen for "DRIVER POWER STATE FAILURE."

Password Settings bug in Lenovo Power Manager ?

On my w530 I created a new power profile in Lenovo Power Manager, but no matter how many times I change it to NOT require a password on wakeup from sleep, the settings keep reverting from 'No' to 'Yes' (as in Yes, require password).
I open Power Man as admin, change 'Yes' to 'No', click apply and verify that it says 'No'. Then i close power manager and reopen it, and it once again says 'Yes'.
What is going on?
Moderator Note; subject edited to better reflect subject

There's a stickied thread at the top of this board which explains / discusses ThinkPad software for Windows 8, hopefully the information you are looking for is there.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

ThinkPad Yoga: No Lenovo Power Manager?

Is there no Lenovo Power Management software for the ThinkPad Yoga? I liked the application. I noticed on the regular Yoga 2, there is an Energy Manager app.

Hi,
Welcome to Lenovo Community Forums!
If you are using Windows 8/8.1, I’m sorry to inform that Power manager doesn’t exist for the above said operating systems. Energy management is designed to work for Ideapads and ThinkPads are supported with a set of applications called Lenovo Think Vantage Toolbox. Unfortunately, Lenovo had to withdraw power manager for its ThinkPad models due to certain conflicts with Windows 8/8.1.
Hope this clarified your query!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Registry issue with Lenovo Power Manager with X61

I have the following problem.
Hi guys,
Lenovo power manager v1,6 quit working properly lately so I googled for a solution which involved removing power schemes which had reproduced in the registry to cause an overload to the application.
Anyway because this wasnt really working (I ended up with having powerschemes but wasnt allowed to change them) I in my brightest moments decieded to delete the messed up part of my registry [HKEY_CURREN_USER --> Control panel --> PoweCfg] because it was preventing my reinstalations of said program from functioning properly since they resorted to the previosly present registryentrys.
Well it appears that when installing the powermanager it does not write these new registry entrys and Im stuck now without a way to get them back. I wonder at what point that registry entry is written in the first place, does anyone feel like exporting said part of their healthy registry...please...?

..this one is from an x200 with Server2003...seems like you're familiar enough with registry exports and wrapping and shoiuld be able to convert this into a *.reg form:
Windows Registry Editor Version 5.00
[HKEY_USERS\.DEFAULT\Control Panel\PowerCfg]
"CurrentPowerPolicy"="7"
[HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\GlobalPowerPolicy]
"Policies"=hex:01,00,00,00,00,00,00,00,03,00,00,00,08,00,00,00,00,00,00,00,03,\
00,00,00,08,00,00,00,02,00,00,00,03,00,00,00,00,00,00,00,02,00,00,00,03,00,\
00,00,00,00,00,00,00,00,00,00,01,00,00,00,00,00,00,80,00,00,00,00,01,00,00,\
00,00,00,00,80,01,00,00,00,05,00,00,00,02,00,00,00,04,00,00,c0,01,00,00,00,\
04,00,00,00,01,00,00,00,0a,00,00,00,00,00,00,00,03,00,00,00,01,00,01,00,01,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,02,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,03,00,00,00,00,\
00,17,00,00,00
[HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\PowerPolicies]
[HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\PowerPolicies\0]
"Name"="Home/Office Desk"
"Description"="This scheme is suited to most home or desktop computers that are left plugged in all the time."
"Policies"=hex:01,00,00,00,02,00,00,00,01,00,00,00,00,00,00,00,02,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,2c,01,00,00,32,32,00,03,04,00,00,00,04,00,\
00,00,00,00,00,00,00,00,00,00,b0,04,00,00,2c,01,00,00,00,00,00,00,58,02,00,\
00,01,01,64,50,64,64,00,00
[HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\PowerPolicies\1]
"Name"="Portable/Laptop"
"Description"="This scheme is designed for extended battery life for portable computers on the road."
"Policies"=hex:01,00,00,00,02,00,00,00,01,00,00,00,00,00,00,00,02,00,00,00,01,\
00,00,00,00,00,00,00,b0,04,00,00,84,03,00,00,32,32,03,03,04,00,00,00,04,00,\
00,00,01,00,00,00,14,f2,06,00,84,03,00,00,78,00,00,00,08,07,00,00,2c,01,00,\
00,01,01,64,64,64,64,a0,71
[HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\PowerPolicies\2]
"Name"="Presentation"
"Description"="This scheme keeps the monitor on for doing presentations."
"Policies"=hex:01,00,00,00,02,00,00,00,01,00,00,00,00,00,00,00,02,00,00,00,01,\
00,00,00,00,00,00,00,00,00,00,00,84,03,00,00,32,32,03,02,04,00,00,00,04,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,2c,01,00,\
00,01,01,50,50,64,64,00,00
[HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\PowerPolicies\3]
"Name"="Always On"
"Description"="This scheme keeps the computer running so that it can be accessed from the network. Use this scheme if you do not have network wakeup hardware."
"Policies"=hex:01,00,00,00,02,00,00,00,01,00,00,00,00,00,00,00,02,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,32,32,00,00,04,00,00,00,04,00,\
00,00,00,00,00,00,00,00,00,00,b0,04,00,00,84,03,00,00,00,00,00,00,08,07,00,\
00,00,01,64,64,64,64,00,00
[HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\PowerPolicies\4]
"Name"="Minimal Power Management"
"Description"="This scheme keeps the computer on and optimizes it for high performance."
"Policies"=hex:01,00,00,00,02,00,00,00,01,00,00,00,00,00,00,00,02,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,2c,01,00,00,32,32,03,03,04,00,00,00,04,00,\
00,00,00,00,00,00,00,00,00,00,84,03,00,00,2c,01,00,00,00,00,00,00,84,03,00,\
00,00,01,64,64,64,64,00,00
[HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\PowerPolicies\5]
"Name"="Max Battery"
"Description"="This scheme is extremely aggressive for saving power."
"Policies"=hex:01,00,00,00,02,00,00,00,01,00,00,00,00,00,00,00,02,00,00,00,05,\
00,00,00,00,00,00,00,b0,04,00,00,78,00,00,00,32,32,03,02,04,00,00,00,04,00,\
00,00,00,00,00,00,00,00,00,00,84,03,00,00,3c,00,00,00,00,00,00,00,b4,00,00,\
00,01,01,64,32,64,64,00,00
[HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\PowerPolicies\7]
"Policies"=hex:01,00,00,00,00,00,00,00,01,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,32,32,00,00,04,00,00,00,04,00,\
00,00,00,00,3d,77,2e,f2,07,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,01,01,64,50,64,64,91,7c
Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

[T530] Change Lenovo Power Manager Profiles with [Fn]+[F3]

T530, 2429-5ZG
OS: Windows7 Pro SP1 (x64)
Power Manager 6.45
Lenovo Power Managment Driver 1.65.05.21
Hello everybody. I hope someone can help me out as I can't solve this problem myself.
I used to have a R52 where I could use the keyboad shortcut [Fn]+[F3] to choose between the power profiles or to switch off the display.
Using the T530 now, the shortcut [Fn]+[F3] just locks the screen instead of choosing between the power profiles.
Is there a way to make it work like it did on the R52? I did find the executable (C:\Program Files (x86)\ThinkPad\Utilities\PWMOSDV.EXE). Is there a way to "reprogram" the key shortcut not to lock the screen but to execute the PWMOSDV.EXE file?
I would appreciate any help.

- [Fn]+[F7] -> choose between internal or external monitor or both.
- I know that option tab from my R52, but there is no such option in my Version of Power Manager (v6.45)
The problem is, that even in the manual provided for the T530/W530, in the chapter for the "special keys", there are no keys defined for choosing between the power profiles, it also says that [Fn]+[F3] locks the screen.
What thinkpad model and Power Manager Version do you use?
PS: I browsed the forum and I'm not the only one missing this option:
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W530-Fn-F3-F4-and-F5/td-p/958229

Strange lenovo power menager behavior in vista

Similar Messages

Maybe you are looking for