Strange license issue while creating new isolation group
Dear all,
we just installed CPS M28.20-37214 on NW 7.0 SP 21.
Now I want to create an isolation group and get following error:
*10:30:27 AM: JCS-122045: Unlicensed feature: ProcessServerService.SAP.limit *
Error details:
JCS-122035: Unable to persist: JCS-102081: License does not permit this modification for Isolation Group-object: Isolation Group
And this is our free-of-charge license:
CPS-Basic ProcessServerService.SAP.ApplicationsAPI true
CPS-Basic ProcessServerService.SAP.SolutionManager true
CPS-Basic ProcessServerService.SAP.XBPExternal true
CPS-Basic ProcessServerService.SAP.limit 0
CPS-Basic System.NamedUsers.limit 10
CPS-Basic System.Production true
CPS-Basic company.contract CPS-Basic
CPS-Basic company.name xxxxxxxx
CPS-Basic product.name SAP Central Process Scheduling by Redwood
CPS-Basic signature 3
CPS-Basic system.id SAP:xxxx
This seems to be really strange 'cause I obligatory need a new isolation group to go on with configuration.
Any ideas?
Thanks in advance,
Alex
Dear Adrienne,
I replaced the real system name and id with xxxx, just for security purposes.
All roles have been created and should work fine.
In the meantime I could isolate the problem: there is obviously a license issue when you have more than a main instance running.
Tomorrow a workshop is on with Redwood in Sinsheim, Germany. I hope to get some hints.
Best regards,
Alex
Similar Messages
-
Error while creating new release groups in PO release strategy
Hi All
I was creating a release procedure for PO and after completing steps, Create Characteristic and Create class & while creating new release grp with the class created i am not able to save it and the error message is (ME492) is" Only one release class should be used within the release groups for overall release...".
But i am able to create from an already existing CLASS and able to proceed further.( Note: I am using the training module and in the learning stage.)
Thanks for your support.
IllanDear,
Please follow below mention path.
*and check any things is missing, If you can go in bellow mention hints you cans create easily purchase release streatgy.*
*- Follow below mention path.*
*SPRO -> Material Management -> Purchasing -> Purchase Order -> Release Procedure for Purchase Orders.*
*Three steps involved in release process of purchase order.*
**Edit Characteristic Create characteristic for release purchase order. If you want to release purchase order on purchasing group base. So you can create characteristic for purchasing group. Take reference of CEKKO structure and BKGRP field for purchasing group in additional data of characteristic. E.g :- Purchasing group - BKGRP**
**Edit Class After creation of characteristic, create class for release purchase order. In which you can take reference of Class Type: - 032,Status: - Release,Class group: - Release strategy class,And put reference of your characteristic, which are created by you in first step.E.g: - Class - REL_PO**
*Define Release Procedure of purchase order In this step four processes involved.o Release Groupso Release Codeso Release indicatoro Release Strategies*
Now see each steps of Define release procedure of purchase order in briefly: -
Release Group In which you can define release strategy groupExa.: - Release group : - 01,Release object: - 01, Class: - REL_PO.
Release code In which you can define release code. Enter value as Release group: - 01,release code: -01 - Purchase Head,Release group: -01, release code: - 02 - Auditor
Release indicator In this step you have to define release indicator.Like X - Blocked, I - Under process, S - Release
*Release Strategy *This is the final step for release strategy.Assign release code 01, 02.Click on release prerequisites, select 02 - check box and click on continue.Click on release status button, enter release indicator X, I, S and click continueClick on classification button, enter values of purchasing group for which you want to created release strategy
Than create purchase order for purchasing group, which you assign in classification of release strategy. Enter your values of purchase order and click on check button release strategy executed in your purchase order.
Regards,
Mahesh Wagh -
ERROR :APP-PER-289381 While Creating New Business Group
Hello,
When i am creating new business group in new fresh implementation i am find this error.
APP-PER-289381: A business group with this name exists. Please enter a different name.
I have only Default business group: 'Setup Business group'
Please can any provide a solution for this.. Your early response will highly appreciated.
Thanks
MohsinHi Mohsin,
whatever name you are trying just run the below query to check if it already exists or not.
select * from apps.per_business_groups where name = 'Give here the name you are tyring'
If this returns any row means name already exist in deed. You can rename the existing business group and then create new on. However, if name doesnt exist, wait for any other reply in the forum.
Thanks,
Avinash -
Error in PipelineManager while creating new payment group
Hi Everyone,
I am trying to create a new payment group for purchasing an item with the reward points. i am trying to modify the pipeline flow by overriding commercePipeline.xml. i have added the following lines of code in that xml.
commercepipeline.xml
<pipelinemanager>
<pipelinechain name="validatePaymentGroup">
<pipelinelink name="dispatchOnPGType">
<transition returnvalue="5000"
link="validatePointsPG" />
</pipelinelink>
<pipelinelink name="validatePointsPG"
transaction="TX_MANDATORY">
<processor jndi=
"/com/mystore/order/processor/ValidatePointsPaymentGroup" />
</pipelinelink>
</pipelinechain>
<pipelinechain
name="validatePaymentGroupPreConfirmation">
<pipelinelink name="dispatchOnPGTypePreConfirmation">
<transition returnvalue="5000"
link="validatePointsPGPreConfirmation" />
</pipelinelink>
<pipelinelink name="validatePointsPGPreConfirmation"
transaction="TX_MANDATORY">
<processor jndi=
"/com/mystore/order/processor/ValidatePointsPaymentGroup" />
</pipelinelink>
</pipelinechain>
</pipelinemanager>
when i am starting the server getting below error:
ERROR [nucleusNamespace.] Unable to start service "/atg/commerce/PipelineManager": atg.nucleus.ServiceException: CONTAINER:atg.service.pipeline.PipelineInitializationException; SOURCE:atg.service.pipeline.TransitionException: A PipelineLink is already mapped to return code [5000] in the pipelink named [dispatchOnPGType].
when i tried to check the commercepipeline in Dynamo Administration it is showing that the pipelinechain is locked
CommercePipelineManager
Pipeline Chains
Chain Id
Num Runners
Enabled
Locked
LockAcquiredTime
LockReleasedTime
LockingThread
validatePaymentGroup
0
false
true
Fri Jan 24 10:55:46 IST 2014
N/A
main
loadOrder
0
true
false
N/A
Fri Jan 24 10:55:44 IST 2014
N/A
updateOrder
0
true
false
N/A
Fri Jan 24 10:55:44 IST 2014
N/A
processOrder
0
true
false
N/A
Fri Jan 24 10:55:45 IST 2014
N/A
validateShippingGroup
0
true
false
N/A
Fri Jan 24 10:55:46 IST 2014
N/A
refreshOrder
0
true
false
N/A
Fri Jan 24 10:55:44 IST 2014
N/A
processOrderWithReprice
0
true
false
N/A
Fri Jan 24 10:55:44 IST 2014
N/A
repriceOrderForInvalidation
0
true
false
N/A
Fri Jan 24 10:55:44 IST 2014
N/A
validateForCheckout
0
true
false
N/A
Fri Jan 24 10:55:45 IST 2014
N/A
Thanks&Regards,
RKishoreU have assigned return code 5000 in both chain to ur new pipeline link.
OOTB 5000 is already assigned to invoice chain.
U need to change return code to new unassigned value.Also return code must be added in expected return codes in ValidatePaymentGroupByType component.
Refer this: Oracle ATG Web Commerce - Extending Order Validation to Support New Payment Methods
Thanks,
Nitin. -
Issues while creating new user in SAP HANA
Hello Team
When i am trying to create a new user in SAP HANA studio i can see that there has been a new field added of DATA validity where there are two options a) Valid From and b)Valid Unitl . No matter whatever dates i give in this i got this error which creating the user . Status :- inactive
Reason :- outside validity period . PFA screen shot attached below . Please suggest what dates should be given in this field with some sample example .
RegardsPrag,
Try this. Execute the following in a SQL window started by a userid that has been granted the USER ADMIN system privilege:
ALTER USER BODS1 VALID FROM NOW UNTIL FOREVER;
You can use a date instead of FOREVER --- '2016-12-31 23:59'.
Good luck,
Robert -
Hi, I am facing an issue while creating a new web part page (Safeunit.aspx) within a folder (Safematic Seal Support Systems) located under a Document Library (Product Information Documents).
The path I am explaining:
Going to the Document Library (Product Information Documents) --> now inside that, clicking on a folder (Wet Seal Support
Systems) --> now inside the folder clicking on another sub-folder (Safematic Seal Support Systems) --> Here I want the web page Safeunit.aspx
Issue is that when I reach to the required destination, and want to create the web page by clicking on 'Site Action' --> 'Create' --> 'Web Part Page', now while selecting the Document Library name from the drop-down list, I do use 'Product
Information Documents' since the folder is inside this library only; but that create the page directly under the 'Product Information Documents' library, not under the sub-folder (Safematic Seal
Support Systems).
FYI, it is SP2007 version.
Kindly assist in this. Thanks in advance.I see that you have the namespaces reference in your code.
I think you have changed the NameSpace name of your code to CreateSPFolder, change the reference in all your manifest, and other files to point to the current namespace name. It should help.
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you -
Issues while creating a search project in BCC
Hi There,
Migrating the apps from 2007.3 to 10.0.3.Experiencing issues while creating a search project.
Step #1.In Search Administration,navigating through Project > Global Settings & creating a Content Label named as "Catalog"
Step #2.Navigating through Project > Create Production Project.Creating a project with Content Set as "CatalogSet"
Step #3.Adding a Content with this info:
Content Name: Catalog
Type of Content : ATG Repository
IndexingOutputConfig Path : /atg/commerce/search/ProductCatalogOutputConfig
Host name : localhost
RMI : 10160 ( RMI port of commerce instance)
Creating a content & getting the message as New Content "CatalogTest" has been created.
Issue #1: Content is not displaying in the Content eventhough content has been created successfully.
Issue #2: Getting error for "Default Text Processing Options"
You can refer these issues in the attached screenshot "Content-Page-with-error.jpg"
Step #4.Creating a new TPO as "English" & trying to "Associate Search Project" & getting an error.Refer the attached error log "Associate-Search-Project.log"
Due to these issues, "Build Index" button is disabled.Did anybody experienced these issues? Any help/comments are appreciated.
Also attached the full server logs as commerce-server.log & publishing-server.log.
Since no options for attachment in this forum, I posted the attachment in this link.Please refer it.
https://groups.google.com/forum/?fromgroups#!topic/atg_tech/csEHi-x3Nyc
Thanks in advance!
Mani
Edited by: user11263665 on Apr 25, 2012 10:38 PMWe faced the same problem when migrating from 2007 to ATG 10.0.3. The reason this error comes up is because the Search depends on a local customization adapter /atg/searchadmin/adapter/customization/LocalCustomizationDataAdapter which adds English as a language in the text processing options.
After the migration you need to import the initial ATG search related data into your Search schema. These instructions have been mentioned in the ATG install guide. Here is the extract from the docs.
Note: The import scripts import data using startSQLRepository. Make sure your JTDataSource and
FakeXADatasource are configured to permit this in home/localconfig. JTDataSource should automatically
point to FakeXADataSource. FakeXADataSource should point to the administration database, and
FaxeXADataSource_production should point to the production database. Note that some product
installation processes, including Oracle ATG Web Knowledge Manager Self Service, need FakeXADataSource
pointed at the production database, so you may need to change the FakeXADataSource between installations.
once you are done with the configurations above, import only the searchadmindata xml into search schema as this imports the LocalCustomizationDataAdapter config information into your search schema. Once this is done, you should be good to index.
<ATG10dir>\home\bin\startSQLRepository.bat|sh -m SearchAdmin.AdminUI
-repository /atg/searchadmin/SearchAdminRepository -import
<ATG10dir>\Search10.1\SearchAdmin\common\data\initial\searchadmindata.
xml -
Error while creating new user in Oracle 11i EBS
I am getting following error while creating new user. How solve this issue?
“Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
- This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
- This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
- This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
1344802
1363919
1472974
1351004
1377615
You will need to apply the following patches for 11.5.2:
1377615 -
SBO0001 error DBD:ORA12154 error while creating new connection
Dear All,
I have installed XIR3 on a windows 64 bit with oracle 10g R2 client.
The CMS is up and running and I am able to connect to the infoview and view the lsit of all the migrated objects from BOXIR2.
But, when I am trying to create a new connection for the universe or trying to execute the existing reports i am getting the following error.
(i.e I guess BO is unable to connect to DB)
*SBO0001 error DBD:ORA12154 error while creating new connection
I tried various solution from BOB but still could not solve this. Please anyone suggest few tips regarding this case
Business objects: CMS is running and able to connect to infoview and able to log on to CMC
Database client: Able to log on to DB using sqlplus and tnsping is working.
the details of the software are as follows
*BO Server configuration
OS: Windows Server 2008 R2 64 bit
Business Objects XI R3 3.0
Oracle client 10gR2 32 bit
*Database server configuration
Oracle 11g R2 64 bit
Thanks,
MikeMike :
I am having a similar issue with the BOE and Oracle.
Can you please provide details of which Oracle client you ended-up using..?
32-bit or 64-bit...?
Oracle client version...?
Specific client patches applied..?
Thanks,
Mark -
Error while creating a product group--Batch input error 9
Hi,
While creating a product group in T-code MC84, getting the error message" Product group can not be created (Batch input error 9)". Would appreciate providing yr help to resolve above issue.
Thks,
NileshHi Neel,
As ponited by you, the material type "PROD" is realted with creation of product group.I am able to resolve the error, "actually the work schedulling & MRP views were not activated for "PROD" resulting in the above error.
Thks for yr help.
Regards,
Nilesh -
Error while creating new client
Hi,
recently i installed sap 4.7 in my system .
to create new client i copy the standard one and i assigned password .
While i am trying to login in to new client i am getting error "password is not right even though it is passsword given while creating new one.
can any explian me how to resolve this
regards
babuHi. welcome.
dont worry. cool.
some times due to eror uploads in data base theese type of error happens. put a mail to basis people of your company. they will solve ur issue/
thanks
karthik -
Hi Folks,
I have an issue while creating a purchase order for some inventory items (not all items).
System is populating a Note "**A new part number already exists**".
Of course, it is not stopping to save and approve the PO, but still this note is interrupting the users a lot, when they are in rush to create no of PO's.
So, could any expert help me in this issue that how to avoid this note, please?
Thanks in advance.I bet you have a customization/personalization on the po screen that looks at the item, checks if it is obsolete/superceded and displays a message to the user.
Hope this helps
Sandeep Gandhi -
Attachment of another PO while creating New PO
There was one Standard PO 8100000299 available with Two attachments.
Now, when I had open Attachment List to attach document while creating new Service PO, attachments of PO 81/299 was already there and new attachments added to PO 81/299, not to newly created Service PO.
Kindly resolve this issue.One standard PO 81/299 was already there with Two attachment documents.
Now, when I am going to attach documents while creating new service PO, attachment list of PO 81/299 opened instead of blank list and new attachements will be added to 81/299 instead of newly created Service PO. -
Issues while creating implementation for BADI "ME_PROCESS_PO_CUST"
Hi Group,
I have issues while creating implementation for BADI "ME_PROCESS_PO_CUST".
I tried to create implementation for the above mentioned BADI but, I was getting an error like this:
"Interface implementation IF_EX_ME_PROCESS_PO_CUST does not exist".
I want to implement this BADI and so, ideas/views at the earliest will be appreciated.
Please let me know how to overcome this error.
Thanks,
Vishnu.Hi,
Have you activated the class which is implementing the interface? (in transaction SE19 you should see class name)
Best regards,
Wojciech -
The spanning-tree add strange value when I create new Vlans
Hi,
On all switchs access, the spanning-tree add strange value when I create new Vlans from Distrib Layer,
and no association is created with any interface with spanning-tree vlan 700, see below in this exemple,
until I reboot the switch.
somebody already saw this values ?
DSFDS112#sh span sum
Switch is in rapid-pvst mode
Root bridge for: none
EtherChannel misconfig guard is enabled
Extended system ID is enabled
Portfast Default is disabled
PortFast BPDU Guard Default is disabled
Portfast BPDU Filter Default is disabled
Loopguard Default is enabled
UplinkFast is disabled
Stack port is StackPort1
BackboneFast is disabled
Configured Pathcost method used is long
Name Blocking Listening Learning Forwarding STP Active
VLAN0001 0 0 0 3 3
VLAN0002 0 0 0 22 22
VLAN0006 0 0 0 3 3
VLAN0007 0 0 0 8 8
VLAN0009 0 0 0 4 4
VLAN0010 0 0 0 3 3
VLAN0011 0 0 0 3 3
VLAN0012 0 0 0 3 3
VLAN0013 0 0 0 3 3
VLAN0090 0 0 0 15 15
VLAN0109 0 0 0 3 3
VLAN0200 0 0 0 4 4
VLAN0300 0 0 0 26 26
VLAN0302 0 0 0 4 4
VLAN0700 - 253 -1872756560 2087191206 -1872756549 2080375982
VLAN0702 - 253 -1872756560 2087191206 -1872756549 2080375982
VLAN0704 0 0 0 4 4
VLAN0710 - 253 -1872756560 2087191206 -1872756549 2080375982
VLAN0816 0 0 0 3 3
VLAN0820 0 0 0 3 3
20 vlans - 759 -1323302384 1966606322 -1323302237 1946160764
DSFDS112#sh span vlan 700
VLAN0700
Spanning tree enabled protocol rstp
Root ID Priority 4796
Address 0008.e3ff.fcbc
Cost 10000
Port 608 (Port-channel1)
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority 62140 (priority 61440 sys-id-ext 700)
Address 885a.9213.6880
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Aging Time 300 sec
Interface Role Sts Cost Prio.Nbr Type
Po1 Root FWD 10000 128.608 P2p
DSFDS112#sh run int Gi1/0/25
Building configuration...
Current configuration : 194 bytes
interface GigabitEthernet1/0/25
description Station12
switchport access vlan 700
switchport mode access
end
DSFDS112#sh span interface Gi1/0/25
no spanning tree info available for GigabitEthernet1/0/25
DSFDS112#sh int status interface Gi1/0/25
Port Name Status Vlan Duplex Speed Type
Gi1/0/25 Station12 connected 700 full 100 10/100/1000BaseTX
Thanks for your help,
Regards.Venki,
The ORA-00942 is okay because there is no existing object. But what stuck me is the ORA-01921 error which may indicate that this might not be a new database.
CREATE ROLE exp_full_database
ERROR at line 1:
ORA-01921: role name 'EXP_FULL_DATABASE' conflicts with another user or role name
CREATE ROLE imp_full_database
ERROR at line 1:
ORA-01921: role name 'IMP_FULL_DATABASE' conflicts with another user or role name
Are there any existing databases on this server? Have you tried to create it on other machine?I searched on Metalink too and found Doc ID: 237486.1 ORA-29807 Signalled While Creating Database using DBCA which say that eroror could be ignored. You may want to review that as well.
Ittichai
Maybe you are looking for
-
Writing multiple rows in one line, mysql statement. No strings are saved
Hi, I dont know how to make multiple rows inputs into the table in one sentence. Ive got an error: "java.sql.SQLException: Statement parameter 2 not set" provided by code below. It works fine for one Date row (saves in the db corectly) however when I
-
How to get select option on OVS help.
HI all, can we have select-option on OVS help screen? if yes how to declare the select option. do we need wds_select_options component? can any explane step by step how to achive this? OVS is working fine without range. I went through so mant post bu
-
Problem with max function in air
Hello ,how are you,I write this query : [b]SELECT *, max(trackerId) FROM sessiontracker [/b]in sqlite manager and it works ,but when I use it in Air application ,it send me back this error: ReferenceError: Error #1056: Cannot create property max(tr
-
Checkpoint not complete & more online redo groups
Hi When i doing a import i found in alert log checkpoint not complete.I am planning to add 2 more groups.TO add online redolog groups & and to take affect in database,whether we need to shutdown the database and restart again. If i have to shutdown t
-
Hi, how setting up a service catalogue? Best regards