Strange lines in messages.log

Hi all,
we have RAC installation with two nodes. On both of them is some strange message in /var/log/messages.log written twice per second. Because of this messages.log is growing in size very fast.
I'm totally confused which process is responsible using sudo and generating such records.
Here are few lines......
Mar 10 14:14:06 fst1333x su: (to oracle) root on none
Mar 10 14:14:06 fst1333x su: (to oracle) root on none
Mar 10 14:14:08 fst1333x su: (to oracle) root on none
Mar 10 14:14:08 fst1333x su: (to oracle) root on none
Mar 10 14:14:09 fst1333x su: (to oracle) root on none
Mar 10 14:14:09 fst1333x su: (to oracle) root on none
Mar 10 14:14:10 fst1333x su: (to oracle) root on none
Mar 10 14:14:10 fst1333x su: (to oracle) root on none
Mar 10 14:14:11 fst1333x su: (to oracle) root on none
Mar 10 14:14:11 fst1333x su: (to oracle) root on none
Mar 10 14:14:12 fst1333x su: (to oracle) root on none
Mar 10 14:14:13 fst1333x su: (to oracle) root on none
Mar 10 14:14:14 fst1333x su: (to oracle) root on none
Mar 10 14:14:14 fst1333x su: (to oracle) root on none
Mar 10 14:14:15 fst1333x su: (to oracle) root on none
Mar 10 14:14:15 fst1333x su: (to oracle) root on none
Mar 10 14:14:16 fst1333x su: (to oracle) root on none
Mar 10 14:14:16 fst1333x su: (to oracle) root on none
Mar 10 14:14:17 fst1333x su: (to oracle) root on none
Mar 10 14:14:17 fst1333x su: (to oracle) root on none
Mar 10 14:14:19 fst1333x su: (to oracle) root on none
Mar 10 14:14:19 fst1333x su: (to oracle) root on none
Mar 10 14:14:20 fst1333x su: (to oracle) root on none
Mar 10 14:14:20 fst1333x su: (to oracle) root on none
Mar 10 14:14:21 fst1333x su: (to oracle) root on none
Mar 10 14:14:21 fst1333x su: (to oracle) root on none
Mar 10 14:14:22 fst1333x su: (to oracle) root on none
Mar 10 14:14:22 fst1333x su: (to oracle) root on none
Mar 10 14:14:23 fst1333x su: (to oracle) root on none
Mar 10 14:14:23 fst1333x su: (to oracle) root on none
Mar 10 14:14:25 fst1333x su: (to oracle) root on none
Mar 10 14:14:25 fst1333x su: (to oracle) root on none
Mar 10 14:14:26 fst1333x su: (to oracle) root on none
Mar 10 14:14:26 fst1333x su: (to oracle) root on none
Mar 10 14:14:27 fst1333x su: (to oracle) root on none
Mar 10 14:14:27 fst1333x su: (to oracle) root on none
Mar 10 14:14:28 fst1333x su: (to oracle) root on none
thanks for your suggestions
Robert

Hi Chandra,
unfortunately I can't stop the whole database just because of this "little" problem. And don't even know if it really helps. Now I'm installing the same SW on VMWare server. Hope, that it will help me reproduce this problem and then I can try this patch.
Thank you, however, for your suggestion.
Robert

Similar Messages

Strange Solaris 8 behavior and warnings in messages log

Hello,
Solaris 8 4/01 has strange behavior on Ultra 10. After an aleator period after log in, without running an application, window controls dissapear and the machine hangs up.
here are a few lines from messages log:
Aug 20 11:53:54 paris su: [ID 105066 kern.notice] NOTICE: su1: silo overflow
Aug 20 11:53:54 paris
Aug 20 11:53:54 paris su: [ID 643653 kern.notice] NOTICE: su1: ring buffer overflow
Aug 20 11:53:54 paris
Aug 20 11:55:55 paris su: [ID 643653 kern.notice] NOTICE: su1: ring buffer overflow
Aug 20 17:27:32 paris unix: [ID 839527 kern.notice] sched:
Aug 20 17:27:33 paris unix: [ID 294280 kern.notice] software trap 0x7f
Aug 20 17:27:34 paris unix: [ID 101969 kern.notice] pid=0, pc=0xf0050e14, sp=0x2a10001b2e1, tstate=0x8800001401, context=0x0
Aug 20 17:27:36 paris unix: [ID 743441 kern.notice] g1-g7: 10037c7c, 2, 1, 7, 0, 0, 2a10001fd40
Aug 20 17:27:37 paris unix: [ID 100000 kern.notice]
Aug 20 17:27:38 paris genunix: [ID 723222 kern.notice] 000000001040c110 unix:sync_handler+150 (1041a970, 10400000, 0, 0, 0, 0)
Aug 20 17:27:40 paris genunix: [ID 179002 kern.notice] %l0-3: 0000000000001602 0000000000000016 000000000000000e 0000000010009e90
Aug 20 17:27:40 paris %l4-7: 0000000000000000 0000000000000000 000000000000000c 000000001040c140
Aug 20 17:27:45 paris genunix: [ID 723222 kern.notice] 000000001040c1e0 unix:prom_rtt+0 (10000000, 16, f0000000, 1041b130, 3000005f548, 0)
Aug 20 17:27:48 paris genunix: [ID 179002 kern.notice] %l0-3: 0000000000000002 0000000000001400 0000008800001401 0000000010026e4c
Aug 20 17:27:48 paris %l4-7: 00000000f0050dc0 00000000f00676a8 000000000000000c 000000001040c290
Aug 20 17:27:52 paris genunix: [ID 723222 kern.notice] 000000001040c330 unix:client_handler+2c (f0067138, 2a10001bc48, 20, 10428288, 1, 1041a970)
Aug 20 17:27:55 paris genunix: [ID 179002 kern.notice] %l0-3: 000000001041a788 0000000000000000 000000001040e400 0000000000000001
Aug 20 17:27:55 paris %l4-7: 0000000000000016 000000000000000e 0000000000000016 000000000023f0e0
Aug 20 17:28:00 paris genunix: [ID 723222 kern.notice] 000002a10001bb90 unix:prom_enter_mon+28 (0, c, b, 300001b7000, 0, 1013c6b4)
Aug 20 17:28:02 paris genunix: [ID 179002 kern.notice] %l0-3: 0000000010026ad4 0000000000000016 0000000000000009 0000000010009c78
Aug 20 17:28:02 paris %l4-7: 000000001041b130 0000000000000016 0000000000000001 000002a10007d7f0
Aug 20 17:28:07 paris genunix: [ID 723222 kern.notice] 000002a10001bc60 unix:debug_enter+d0 (0, 30000fdf910, 0, 10, 0, 3000006a098)
Aug 20 17:28:09 paris genunix: [ID 179002 kern.notice] %l0-3: 000003000002da00 0000030000f70000 0000000000000000 00000300016943f0
Aug 20 17:28:09 paris %l4-7: 0000000000000000 00000300016943e0 00000300007a1f28 0000000000000000
Aug 20 17:28:13 paris genunix: [ID 723222 kern.notice] 000002a10001bd30 su:async_rxint+218 (30000fdf910, 3000107a088, 1000, ff, 0, 2000)
Aug 20 17:28:16 paris genunix: [ID 179002 kern.notice] %l0-3: 000000001013c6b4 000003000107a089 000003000105a086 0000000000000001
Aug 20 17:28:16 paris %l4-7: 0000030000fdf910 00000000000000f6 000003000105a000 0000000000006000
Aug 20 17:28:21 paris genunix: [ID 723222 kern.notice] 000002a10001bde0 su:asyintr+134 (6, 30000fdf910, 6, 10441de0, 10072068, 300001b7000)
Aug 20 17:28:24 paris genunix: [ID 179002 kern.notice] %l0-3: 0000000000000000 00000000001298dd 0000000000000000 000003000006a088
Aug 20 17:28:24 paris %l4-7: 00000300000578c8 000003000078fea8 0000000000000000 000003000078fed0
Aug 20 17:28:28 paris genunix: [ID 723222 kern.notice] 000002a10001be90 pcipsy:pci_intr_wrapper+64 (1047e2d8, 7e9, 1, 30000074148, 30000063208, 300001303c8)
Aug 20 17:28:32 paris genunix: [ID 179002 kern.notice] %l0-3: 000000001026fca4 0000000000000000 0000000000000000 0000030000073c28
Aug 20 17:28:32 paris %l4-7: 000000001158ff20 0000000000000000 0000000000000000 0000000000000000
Aug 20 17:28:36 paris genunix: [ID 723222 kern.notice] 000002a10001bf50 unix:current_thread+44 (2a10001fd40, 1041b130, 300011de010, 10423840, 16, 0)
Aug 20 17:28:39 paris genunix: [ID 179002 kern.notice] %l0-3: 0000000010007450 000002a10001f151 000000000000000c 000002a10001bf50
Aug 20 17:28:39 paris %l4-7: 0000000000000000 0000000000000000 0000000000000000 000002a10001fa00
Aug 20 17:28:44 paris genunix: [ID 723222 kern.notice] 000002a10001faa0 unix:idle+54 (1040f850, 0, 0, 1041b130, 3000005f548, 0)
Aug 20 17:28:46 paris genunix: [ID 179002 kern.notice] %l0-3: 00000000100416c4 0000000000000000 0000000000000000 000002a1000b7d40
Aug 20 17:28:46 paris %l4-7: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
Aug 20 17:28:51 paris unix: [ID 100000 kern.notice]
Aug 20 17:28:51 paris genunix: [ID 672855 kern.notice] syncing file systems...
Aug 20 17:29:04 paris genunix: [ID 433738 kern.notice] [2]
Aug 20 17:29:04 paris genunix: [ID 733762 kern.notice] 12
Aug 20 17:30:47 paris genunix: [ID 433738 kern.notice] [2]
Aug 20 17:37:27 paris last message repeated 9 times
Aug 20 17:37:29 paris genunix: [ID 616637 kern.notice] cannot sync -- giving up
Aug 20 17:37:30 paris genunix: [ID 353387 kern.notice] dumping to /dev/dsk/c0t0d0s1, offset 214827008
Aug 20 17:37:38 paris genunix: [ID 409368 kern.notice] 100% done: 10582 pages dumped, compression ratio 3.80,
Aug 20 17:37:38 paris genunix: [ID 851671 kern.notice] dump succeeded
Any ideea what is wrong with my machine ?
Thank you,
Razvan

Hi Chandra,
unfortunately I can't stop the whole database just because of this "little" problem. And don't even know if it really helps. Now I'm installing the same SW on VMWare server. Hope, that it will help me reproduce this problem and then I can try this patch.
Thank you, however, for your suggestion.
Robert

Capture error messages in message log in ME21n transaction

Hello friends,
i have a question here.I have created a Z-table which contain data about material groups which will not be used for the particular plant.when we create a PO now ,i am checking for each line item whether the material group entered for each line item exists in Z-table or not.If exists then throw a message 'XXXXXXXX.'
as this is an enhancement to Me21n transaction , i am using User exit EXIT_SAPMM06E_012 .Now my problem is for each line item i am checking for condition and throwing a message.My requirement is show up all messages(for eg : If more than 1 line item contain errors for the same condition) in the message log of the transaction ME21n screen.I dont think we can do this in the User exit as showing up messages in ME21n is standard functionality
Could anyone please give any idea how to achieve this??
Thanks in advance!

Hi,
You may write to application error log or call screen to show error log in user exit.
Cheers.
...Reward if useful.

Strange lines on my screen

Recently I have noticed strange lines appearing on the screen of my MacBook Pro - they appear and disappear randomly. I have noticed it especially on and around icons, as well as around the edges of Finder windows. Today it escalated to the point where I couldn't see anything on the screen (see attached screenshot). My computer is about 3 years old and I haven't had any problems with it.
I just recently upgraded to Mavericks - could this have anything to do with it? The problem started shortly thereafter.
Please help!!

Disabling "Automatic Graphics Switching" seems to work to resolve this problem.
System Prefs -> Energy Saver -> Disable automatic graphics switching
Source:
https://discussions.apple.com/message/23982751#23982751

Synergyc spamming messages.log

Just wanted to let you guy's know that if you follow the instructions on the archwiki for autostarting the synergy client using the /etc/rc.d/synergyc file, then you may want to edit the line that calls synergy to include "-d WARNING". This way only messages with level "WARNING" and above get added to messages.log.
Example spam messages:
May 26 22:30:46 localhost Synergy 1.4.6: 2012-05-26T22:30:46 INFO: entering screen
/build/src/synergy-1.4.6-Source/src/lib/synergy/CScreen.cpp,103
May 26 22:30:47 localhost Synergy 1.4.6: 2012-05-26T22:30:47 INFO: leaving screen
/build/src/synergy-1.4.6-Source/src/lib/synergy/CScreen.cpp,121
Example /etc/rc.d/synergyc
#!/bin/bash
. /etc/rc.conf
. /etc/rc.d/functions
#Put the server host name in the following line
SERVERALIAS="server-host-name"
PID=`pidof -o %PPID /usr/bin/synergyc`
case "$1" in
start)
stat_busy "Starting Synergy Client"
[ -z "$PID" ] && /usr/bin/synergyc -d WARNING "$SERVERALIAS"
if [ $? -gt 0 ]; then
stat_fail
else
/usr/bin/xset r on
add_daemon synergyc
stat_done
fi
stop)
stat_busy "Stopping Synergy Client"
[ ! -z "$PID" ] && kill -9 $PID
if [ $? -gt 0 ]; then
stat_fail
else
rm_daemon synergyc
stat_done
fi
restart)
$0 stop
sleep 1
$0 start
echo "usage: $0 {start|stop|restart}"
esac
exit 0
This is useful so that your messages.log isn't full of unimportant stuff if you're trying to debug other problems, also reduces the overall number of reads and writes which may be good for people running on SSDs (though the var directory should probably be put on a different HDD if possible in that case).

Awesome, I just did that.
https://wiki.archlinux.org/index.php/Sy … leshooting

Strange i8042 error messages

I get the following strange i8042 error messages appearing whenever I suspend my machine:
i8042: Can't reactivate KBD port
PM: Device i8042 failed to resume: error -19
However, the system seems to work fine. A google search suggested adding the kernel parameters: i8042.reset and i8042.nomux to my kernel boot line, which I have done, but this did not work.
System is an Intel ATOM 330 AsRock motherboard with a Logitech MK300 wireless mouse and keyboad combo.
Any ideas appreciated.

I'd say you can just ignore it. i8042 is a builtin (rather than a module) which is part of PS/2 keyboard support.

BRF+ Message Log & "Rule as Expression"

Hi colleagues,
I am quite new to BRFplus and have two questions:
1) I would like to use a message log action in order to indicate errors. I tried to follow https://wiki.wdf.sap.corp/wiki/display/FDT/Message+Log with method SET_APPLICATION_LOG_OBJECT, but I can't find the class this method belogns to. I also tried modelling a rule & action message log with help of the UI. My question is how can I log messages and where can I find them after the function is beeing processed?
2) In every guide I can read something about rule expressions and even how to create them (e.g. http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cc/85414842c8470bb19b53038c4b5259/frameset.htm), but in the workbench there is no possibilty of creating rules as expressions but only rules and rulesets (the rule is not part of the "Expression" node).
I hope somebody knows what I mean
Thanks a lot & kind regards,
Ilijana

Thanks a lot for your response!
Could you tell me why using rules and rulesets is not recommended for 7.01 ? This could be interesting for my bachelor thesis.
Thanks & Kind Regards,
Ilijana

CK40N : no message log update after =cksu

Hi costing experts,
In the costing run statistics there are errors for the marking step, which I correct by entering =cksu according to SAP note 542790.
However, the message log for the marking step is not updated. It is hard to find which are the remaining messages in the overall message log, because there are some 400 messages in total and only 50 are still relevant according to the refreshed statistics.
Does anyone have any idea's about what can be done to update the message log?
Thanks,
Caroline.

I got below error in the ST22 dump....
"Database error text........: "ORA-00060: deadlock detected while waiting for
resource"
Internal call code.........: "[RSQL/INSR//BIC/FZXX_C02 ]"
I was searching for OSS notes associated with following keywords and note able to find any notes related my support pack level we are in SP13 (SAPKW70013)
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB" "WRITE_ICFACT"
Any help will be greatly appreciated...
Thanks,
Raman

Message log not correctly associated with contact

I'm having an issue where I cannot text message a particular contact or phone number. A series of steps I took seems to have exposed a glitch where the message log will not corrrectly associate itself to a newly created contact. So now when I push the SMS button on the new contact, nothing happens. Also when I manually start a new text message and add the contact to the text message and press send, the message clears from the text box and nothing else happens.
Here is how you reproduce the error:
1. I called a number and quickly hung up, just as you would do to log a number for saving later.
2. From the call log, I clicked on the SMS button to send a text message.
3. I sent a text message.
4. From the text message log, I clicked on the number at the top to save it to contacts.
5. I saved a new contact with the number.
6. If you go back to the message log, you should notice that the message log header does not update with the new contact's name. Instead it will still show the number.
7. Finally, I went to the test contact and pressed the SMS button and nothing happens.
After you add the contact like I did, it seems that the contact does not correct connect itself with the message log.
After step 5, go to the message log and click on the message log header which should still be the number. When you do this, you would think it would open up the new test contact info card, but instead it opens up a new contact card, as if the number is not saved to a contact yet. It gives me the option to Add To Contacts at the bottom.

I have the same issue. I started not being able to text only one person. I go to the contact and click on the "SMS" button and it doesn nothing. If I try to send the message directly to the number it just doesn't do anything, the message leaves the text box, but doens't show up in the conversation window. I'm not exactly sure what I did to do this, but I think it's because I added the same contact twice. Once from my incoming calls, and once from my outgoing texts. I've tried deleting all references to this number (ie the contact info, incoming/outoing calls and texts) but nothing has worked. It must be the corrupt contact thing as well.

Message log is not getting deleted in WEBUI (BADI ORDER_SAVE)

Hi,
I am displaying an error message based on certain conditions in BADI: ORDER_SAVE (CHECK_BEFORE_SAVE). On getting error, I am correcting that error.
Using CRM_MESSAGE_DELETE, I am deleting error message before displaying new error message. However, my error log is not going away. It is still displaying in the log in WEBUI.
Could you please help me out, how can I delete error message, and error log from WEBUI.
Thanks,
Sandeep

I have the same question as you .
   I have use folleing code to display message in web ui:
      if (conditions).
      CV_OWN_MESSAGE = 'X'.
      MESSAGE '商机描述已经存在，请修改后再保存！' type 'E' RAISING DO_NOT_SAVE .
    endif.
but when i have edit the description , the Message log is not getting deleted in WEBUI .
who can tell me , thanks for all your help !

Error message: "Logging into the account failed because an error occurred."

Hello,
We had an XServe G5 2.0 DP 5GB/80/2x250 running Mac OS X 10.3.9 Server with all updates as a main server for a school. The server provides Open Directory Master as well as File-Sharing (AFP and SMB) and e-mail services to about 30 teachers and 300 students. The user home directories reside on the server. A web server also runs on the machine. The students use a pool of laptops, which are configured with a local guest and admin account as well as access to the server-based home directories with Directory Access. The server had the OS running on the 80 GB hard drive and all data (Home directories, mail database, website, etc. were on the two mirrored 250 GB drives.) All was working well until...
A few weeks ago, one of the two 250 GB died. We decided to use the opportunity to upgrade the server and set it up with 3 x 750 GB, two drives running as a mirrored pair to hold OS AND Data, the other as a stand-by unit to help replace a failing drive.
We migrated the OS and all data from the previous drives without a problem. Since now, all data is residing on one pair of drives, we put the data from the old "Data" drive in a folder on the root level of the new HD pair. We wrote a script that launches at startup which creates the symlink in /Volumes/Data to link to /Data. We thought that with this, all would be well.
However: When any user tries to log into his account from any iBook (10.3.9 or 10.4.11) (wirelessly), he gets the message:
"Logging into the account failed because an error occurred. The home folder for the user account is located on an afp or smb server. contact your system administrator for help"
If the user logs in to the guest account on the iBook, then accesses his home directory via file-sharing, he can see (read/write) all his data. So, the data and privileges seem to be OK, as well as Open Directory working correctly. Mail and the web work well also, as does logging in to a user account from one of the PC's (wired).
Can anyone make any suggestions as to how to fix the situation? Currently, the users are using the guest accounts and accessing their data via filesharing, as well as using webmail for their e-mail, but this is a major nuisance.
Any help will be greatly appreciated.
Best regards,
Alain Chammas
A user trying to access his account from a PC (wired) has no problems.

A good number of folks are having problems with this same error message at login, and nobody seems to have found a fix.
I believe I have stumbled upon, if not a solution, at least part of the answer. If you're logged into a 10.4 workstation, open a Finder window and click the "Network" icon. The first time you do this, you'll only see "Library" and "Servers" icons, but if you let it sit for a moment, other folders will magically appear. One of these is "My Network" which is the critical part.
In Workgroup Manager, edit one of your users' home directory configuration. There's a URL piece, usually "afp://server.domain.com/Users" (which is what shows up in the window when you click on the "Home" tab for that user), and then there's a "Home" path that is usually something like "/Network/Servers/servername/Users/username". Trouble is, you've noticed that 10.4 doesn't put servers into the "Servers" path, but rather into the "My Network" path.
So, if you change that "Home" path to read "/Network/My Network/servername/Users/username", it should work--with one caveat. Apparently 10.4 doesn't create the "My Network" path on a given client until you actually browse the network on that client. If you haven't logged into a 10.4 workstation and browsed the network, the "My Network" path won't be there, and you'll still get the error. Login as a local user, browse the network (so that the "My Network" folder shows up), logout, and then login as an Open Directory user, and it should work.
I'm betting that 10.3, 10.4, and 10.5 all handle this issue differently, so if you're in a mixed-version situation, you may have to experiment to find a workable fix.
Derndest thing I ever saw.

N:1 Mapping and Matching Lines of Message 1 to Message 2

Hi Everyone,
I have an n:1 mapping and I need to match up the lines of message 1 to the lines of message 2 to map the target. For example:
Source 1
Key1 = A, Key2 = A, Key3 = A, Field1 = Red
Key1 = A, Key2 = B, Key3 = B, Field1 = Blue
Source 2
Key1 = A, Key2 = A, Key3 = A, Field1 = Wagon
Key1 = A, Key2 = B, Key3 = B, Field1 = Sky
Target:
Key1 = A, Key2 = A, Key3 = A, Field1 = Red Wagon
Key1 = A, Key2 = B, Key3 = B, Field1 = Blue Sky
I think that this is possible in a user defined function that basically loops over the Source 2 for each value in Source 1, and I even think I saw a solution to this common problem posted before, but I have searched and can not find it. Any help is greatly appreciated!
Thanks
Peter

Hi Peter,
From the example that you have given, mapping between the two source messages has been
done only for the fields("Field1"). Infact, you are combining the values of the fields
in the both the source messages-to show in the target message.
I think this can be done by creating one source message type which stores both the source
messages (n:1) and then you can map both the field1s of the source messages to field1 of target
message <b>by using the concat function</b>.
Hope this was helpful.
Regards
Sushumna

WH tax line items cleared along with Other line items Message no:8I701

hI guru,
When i run J1INCHLN System givem the error is : Withholding tax line items cleared along with other line items, message no:8I701
Pleas any one give solution ..
I also cheked as respective g/l for tds IN FBL3N . All line items are opend.
Also cheked all selection parameter in J1INCHLN and FBL3N .is same .
Why the sys behaviour like this .
Thanks is andvance
Milind

HI,
he error is occuring in this part of the
unction Module J_1IEWT_CHALLAN_UPDATE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LOOP AT p_t_ausz1.
Select the cleared line item from bseg table.
   SELECT SINGLE * FROM bseg INTO p_bseg_tab
            WHERE bukrs = p_t_ausz1-bukrs
            AND   belnr = p_t_ausz1-belnr
            AND   gjahr = p_t_ausz1-gjahr
            AND   buzei = p_t_ausz1-buzei
            AND   ktosl = 'WIT'
            AND   qsskz NE space .
   IF sy-subrc <> 0.
This is not an ewt clearing transaction relevant for challan update.
     p_no_with_clear = 'X'.
     EXIT.
   ELSE.
     APPEND p_bseg_tab.
   ENDIF.
ENDLOOP.
Even if one line item chosen is not of withholding tax entry, system
should exit by error message.
DESCRIBE TABLE p_bseg_tab LINES p_bseg_lines.
DESCRIBE TABLE p_t_ausz1 LINES p_with_lines.
   IF p_bseg_lines > 0.
At least one entry is found in bseg table for challan update.    IF p_with_lines NE p_bseg_lines.
At least one line chosen by the user is not for challan updation.
      MESSAGE e701(8i).
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>.
This is a clear case,that you are trying to post some documents
which does not match with the selection parameters.
I feel the above problem could be due to some document/s (open items of
the earlier years)are incorrect which is causing the reported problem.
Kindly run the challan update program for smaller date range so that you
can find the faulty document.
Hope this solves your query.
Reg
Madhu M

Can we save the warning message in the message log of Lead.

Hi,
I have an requirement where i have to raise an warning message while "creation of lead from campaign" on campaign UI, I can raise that warning message using below code.
DATA lr_message_service TYPE REF TO cl_bsp_wd_message_service.
lr_message_service = cl_bsp_wd_message_service=>get_instance( ).
lr_message_service->add_message( iv_msg_type = if_genil_message_container=>mt_warning
iv_msg_id = 'ztest'
iv_msg_number = 006
iv_msg_level = '1' ).
but how can i retain this warning message in the lead message log ? "when ever i will open that lead again that warning message should be there"
thanks & regards
raman khurana.

Hi,
Below are the steps to write to the log and then read it,
1. Create a Log useing FM BAL_LOG_CREATE. This will return the log handle.
2. Add messages to log using FM BAL_LOG_MSG_ADD. Importing parameters are log handle and the message.
3. You can read the log by passing the log handle to FM BAL_GLD_SEARCH_MSG. This will return the message handle.
4. Now pass the message handle to FM BAL_LOG_MSG_READ. This inturn return the message id and class. Pass the msg. details to FM BAL_DSP_TXT_MSG_READ to read the message text.
Regards,
Arun Kumar

Can i view an xsl stylesheet? My message log is formatted and I can't read it.

I have found a message log in My Downloads. When I try to read it, it's an xsl stylesheet. What is this? Why is it in this format, and can I convert it so I can read it? Thanks--need details--I don't know much about computers!

An XSL stylesheet usually contains layout rules for an XML data file, but not actual data. Maybe what you found is actually the XML data file, which refers to the XSL style sheet?
If it doesn't help to open it in a Firefox tab, try opening it in Internet Explorer or Microsoft Excel. Both have some capability to decode XML.

Strange lines in messages.log

Similar Messages

Maybe you are looking for