Strange Logic 8.0.2 Behaviour with CrossFades

Hi Guys
I installed Logic 8.0.2 yesterday and today I loaded up a track that we have been working on (previously on 8.0.0). And the problem is that in places where I have used the cross-fade tool between audio regions, what were previously nice seemless fades are now quite a mess with audio from other parts jumping in from all over the place.
Has anyone had similar problems?
And does anyone know if some of the cross-fade functionality was changed for the latest Logic updates which may have caused this.
Cheers
Sam

Select the "delete all fades" function from Options->Audio and hit play - all fades will be recreated. You can also delete the fade file from the project folder which has the same effect.

Similar Messages

Strange repaint behaviour with JList & Keyboard actions

Hi everyone,
This is my first post to the forum. You guys have been a great help in the past and I hope to contribute more in the future.
Anyways, I've encountered some strange repainting behaviour with a JDialog that uses a JList and a JButton. The dialog is fairly straight-forward and basically this is how it works (like an open file dialog - yes I'm implementing my own filechooser of sorts):
* JList lists a number of simple items that the user can select from.
* Once a selection is made, an Open button (JButton) is enabled.
* <ENTER> key is registered (using registerKeyboardAction()) with a JPanel which is used as the main content pane in the dialog.
* The user can either click on the Open Button or hit the <ENTER> key which then closes the dialog and runs whatever logic that needs to.
Now, the repaint problem comes in when:
1. User selects an item.
2. User hits the <ENTER> button
3. Dialog closes
4. User brings the dialog back up. This entails reloading the list by removing all elements from the list and adding new ones back in.
5. Now... if the user uses the mouse to select an item lower in the list than what was done in step #1, the selection is made, but the JList doesn't repaint to show that the new selection was made.
I didn't include a code sample because the dialog setup is totally straight-forward and I'm not doing anything trick (I've been doing this kind of thing for years now).
If I remove the key registration for the <ENTER> key from the dialog, this problem NEVER happens. Has anyone seen anything like this? It's a minor problem since my workaround is to use a ListSelectionListener which manually calls repaint() on the JList inside the valueChanged() method.
Just curious,
Huy

Oh, my bad. I'm actually using a JToggleButton and not a JButton, so the getRootPane().setDefaultButton() doesn't apply because it only takes JButton as an input param. I wonder why it wasn't implemented to take AbstractButton. hmmm.

Strange behaviour with Safari.

Very strange behaviour with Safari this morning. Pages loading piecemeal or partially. The content only becomes viewable after the cursor has passed over the area. Have cleared caches and reported it but I'm wondering if this is a local matter here in the UK. Anyone suffering similar problems? Firefox is responding perfectly normally.

I see a reply has come back via a previous post. As I am trying to get a response to this one I shan't reply there but I should point out that for me, this is an isolated problem. I do use open DNS but with no track history of problems there , I can't blame that.
In the last few minutes normality has returned.

Strange behaviour with nested overflow headers

Hi there,
I have a strange behaviour with nested overflow headers. I have a hierarchy with some dynamic tables an several headers for the hierarchy steps. When the table entries lead to an page overflow, I would assume, that all parent headers will be shown. But unfortunatley only the last (the deepest in the hierarchy) defined overflow header will be shown. Here you can see a quick example of it. (http://www.nemonon.de/HeaderProblem.xdp)
Any help would be very welcome.
Thanks and greetings,
Joerg

That will sure work for some requirements and thanks for the ideas. But this would fail for the second table. Perhaps my example xdp only shows the behaviour of the nested overflow headers and it´s structure is reduced to show that. The real situation is a bit different. The parent containers also contain some other content. The Problem is not the table...I've just chosen it to produce some content and another nested header. Just try to uncheck the overflow header of the table. This will lead to, that the next defined header (in this case "HeaderThree" is shown. When you go on by also disabling that header, the next one will be shown...and so on. This shows, that the headers for their own are functional, but they fail in combination.
Greetings,
Joerg

Strange account behaviour with active sync

Hi all,
i determined a strange behaviour with Active Sync:
I deleted an Account in IDM but in the active sync log i can always see the account information??
Thnx Michael

Although, now that you are doing this
My workaround is to use an additional offscreen buffered image, do all of my rendering to that, and then at the end copy that image in one go to the drawGraphics from the buffer strategy.you no longer need to use BufferStrategy.Yes, good point. That didn't occur to me.
The way my implementation is I have a pluggable rendering strategy (i.e. the strategy pattern) where I can choose an implementation that will use the frame's bufferStrategy and drawGraphics, or my own BufferedImage back buffer. In light of what you've said I can easily change my implementation to not use the buffer strategy at all and I should save some rendering time.
I've found all sorts of weird behaviour when I use active rendering and have the OpenGL pipeline enabled (I need the pipeline enabled because I want accelerated images), e.g. even setting rendering hints can sometimes cause drawString to not output any text after the first frame.
I was really using BufferStrategy because I wanted to use hardware page flipping and sync my screen updates to the vertical blanking interval which, as it happens, I can't actually get to work - but that's a problem for another day/topic.
Anyway, I appreciate your follow-up, thanks.

FF 4 (mac) doesn't display handcursor in all Flash websites. Also all html websites show strange behaviour with cursor. (blinking cursor in nearby div after clicking a button)

I'm running Mac OS 10.6
FF4 doesn't display the hand cursor or type cursor in '''all''' flash websites on links/textfieldss when it should. Highly annoying and disgracing all flashcontent.
Also with html websites I experienced strange cursor behaviour with FF4. Although it's hard to reproduce the problem. It's very inconsistent.
I have the feeling in general FF4 should look into it's cursor behaviour on all possible platforms. Mainly Flash.

I replicated the typing cursor problem on the popular FB. Just click e.g. "x people like this", you'll see you get a blinking type cursor in the "close" button.

Strange behaviour with Subjective Assessments comments in SSM10 SP10

Good day community,
We have strange behaviour with Subjective Assessments comments in SSM10 SP10.
We have been using this successfully for 3 quarters.
The scenario is as follows.
Business users capture Subjective Assessment comments successfully and these can be viewed on the scorecard overview for Q3. This can be printed to PDF successfully as well.
A few hours later, when the user accesses the Scorecard Overview, the Q3(March 2014) comments are now replaced with the
Q2(Dec 2013) comments.
This has not happened previously. We have recently deployed Internet Explorer (IE) 10 to some of the machines that previously used IE9 or IE8. Could this be a contributing factor?
This has happened with one database on 2 contexts. Although the database/scorecard in question has been created on SSM10, we have recently upgraded the rest of the organisation onto SSM10 from SSM7.5 but those are completely separate databases.
We have not found a pattern yet, but there is only one assigned administrator for this database and she often has 'funny' things happen on her machine. Could it be possible that there's a virus on her machine? Or maybe there's a sequence or combination of steps that she's doing that could cause this? We have not been able to recreate the situation in our developer offices.
Any ideas on this strange behaviour would be appreciated.
Regards,
Natasha

Hi everyone,
We have since noticed that if you go into the Administrator > Context Management > and change the "Person Responsible" and then save, once you go back to the Scorecard Overview all the Q3 comments have been overwritten with the Q2 comments.
This happened on a different machine so it seems there could be a bug in the Administrator.
Any thoughts on this strange behaviour would be appreciated.
Regards,

Strange stack behaviour with referenced files

I have just started to notice peculiar behaviour with referenced images within stacks. I have been reviewing last years pictures with a view to clearing out the junk.What I have found is rather alarming in that on clicking a stack to open it all the images within the stack were the wrong pictures, wrong as in taken with a different camera in a different year.The top picture does not seem to be affected.On attempting to find the correct files using 'manage referenced files' all the wrong images are shown as found in the list view with their own file names at the same time the thumbnails (top right hand pane) show the original correct file names but with the wrong thumbnails,Aperture does not realise that it is referencing the wrong files and so will not let me reconnect to the correct files.
Anyone with a similar problem or a cure for this behaviour?

Ok I have deleted and rebuilt thumbnails files to no avail.
What appears to be happening is that aperture is using the wrong file-path for the affected pictures.
I keep all pictures arranged by date order so for example where the correct file path for an image would be;
Raid Zero/Pictures/2006/0609/060928/pict3722
Aperture is giving a file path of
Picture Library/2007/0712/071223/_DCS1023
in the manage referenced files pane it shows the wrong path as above, the thumbnail picture is of the wrong file but the thumbnail name and date is correct.
Interestingly since rebuilding the thumbs it is now possible to reconnect to the correct original file whereas before the reconnect option was not available, however it is only possible to do this one file at a time,the re-connect all function does not work presumably because Aperture is not aware that its filepath is wrong.
Oh dear.... Aperture has just crashed,this immediately after reconnecting 6 files and waiting for the files to update to the correct image in viewer mode.
GRRRRRRRRR!

Bug in cursor behaviour with duplicates

Dear Oracle guys and girls,
first of all: it sucks that i HAVE to provide business information (company name, address, even phone number) even if i just want to participate in this forum for private reasons. I even have to "unsubscribe" to the newsletters although i never subscribed. Then i have to re-enter my timezone information and email address for the forum, because the settings in my profile are ignored. I think there's some room for improvement in this registration process.
OK - back to topic. i think i found a bug in the cursor behaviour with duplicate keys. But the behaviour is very consistent, so maybe it's not a bug, but a bad design. (I call it bad because it's totally unexpected and not logical to me).
I insert some dupes with DB_KEYFIRST; then i create a cursor and iterate over all items in the reverse order (!) with DB_PREV (i also tried DB_PREV|DB_NEXT_DUPE) - no keys are shown.
Alternatively:
I insert some dupes with DB_KEYLAST; then i create a cursor and iterate over all items in the reverse order (!) with DB_NEXT (i also tried DB_NEXT|DB_NEXT_DUPE) - no keys are shown.
cursor->c_get returns the error code -30989 (DB_NOTFOUND).
Why is it not possible to traverse duplicates in the reverse order? To me it looks like a bug.
I tested against db 4.5.20.
Regards
Chris
PS: I would love to hear if the bug i reported here: http://groups.google.com/group/comp.databases.berkeley-db/browse_thread/thread/ed471cf6837cb2a6/dd9cda0ad105f401#dd9cda0ad105f401
will be fixed in the next version.
Here's a test program:
int
main(int argc, char **argv)
unsigned i;
int st;
DB *db;
DBT key, record;
DBC cursor, cursor2;
unlink("test.bdb");
st=db_create(&db, 0, 0);
if (st)
error("db_create", st);
st=db->set_flags(db, DB_DUP);
if (st)
error("db->set_flags", st);
st=db->open(db, 0, "test.bdb", 0, DB_BTREE, DB_CREATE, 0);
if (st)
error("db->open", st);
memset(&key, 0, sizeof(key));
memset(&record, 0, sizeof(record));
st=db->cursor(db, 0, &cursor, 0);
if (st)
error("db->cursor", st);
st=db->cursor(db, 0, &cursor2, 0);
if (st)
error("db->cursor", st);
for (i=0; i<LOOPS; i++) {
record.data=&i;
record.size=sizeof(i);
st=cursor->c_put(cursor, &key, &record, DB_KEYFIRST);
st=cursor->c_put(cursor, &key, &record, DB_KEYLAST);
if (st)
error("cursor->c_put", st);
while (!(st=cursor2->c_get(cursor, &key, &record, DB_NEXT))) {
printf("%d\n", *(int *)record.data);
st=cursor->c_close(cursor);
if (st)
error("cursor->c_close", st);
st=db->close(db, 0);
if (st)
error("db->close", st);
return (0);
}

st=cursor->c_put(cursor, &key, &record, DB_KEYFIRST);
st=cursor->c_put(cursor, &key, &record, DB_KEYLAST);
if (st)
error("cursor->c_put", st);
please delete the first line, it was a cut and paste error. as i said earlier: insert with KEYLAST, query with NEXT.

Point4D.Multiply inconsistent behaviour with NaN values

I've noticed some peculiar behaviour with System.Windows.Media.Media3D.Point4d.Mutiply when used with NaN values.
The following assumes that I expect that 0 * NaN should result in 0. There is an argument against that logic, but that is not the point here.
I have a 4x4 matrix defined, in the case that it is an Identity matrix and there is a NaN component in the vector, I would like to get some defined vector output where it is possible to calculate the component.
E.g. (1,2,NaN,4) * (Identity Matrix) = (1,2,NaN,4).
I was caught out for a while:
By stepping through using the debugger gives the output I want (1,2,NaN,4).
But allowing the debug code to run through uninterrupted gives the result (NaN, NaN, Nan, Nan).
There is a slightly surprising workaround: - using Matrix.IsIdentity seems to trigger the result I want
If I use the default Matrix constructor instead of a manually created one (normally created elsewhere in code), there is no problem.
Can anyone explain this inconsistency?
Simple C# console demo:
using System;
using System.Windows.Media.Media3D;
namespace TestNan
class Program
static void Main(string[] args)
Point4D testPoint = new Point4D(1.0, 2.0, Double.NaN, 4.0);
Matrix3D testMatrix = new Matrix3D(1.0, 0.0, 0.0, 0.0,
0.0, 1.0, 0.0, 0.0,
0.0, 0.0, 1.0, 0.0,
0.0, 0.0, 0.0, 1.0);
var testResult1 = Point4D.Multiply(testPoint, testMatrix);
Console.WriteLine(testResult1.ToString());// NaN,NaN,NaN,NaN
var b = testMatrix.IsIdentity;
var testResult2 = Point4D.Multiply(testPoint, testMatrix);
Console.WriteLine(testResult2.ToString());// 1, 2, NaN, 4
Console.ReadKey();

>>Can anyone explain this inconsistency?
The Matrix3D class has an internal boolean flag that it uses to determine if the matrix is actually an identity matrix and this flag is not set when you create a Matrix3D object using the constructor that takes the 16 double values despite the fact that
you are actually creating an identity matrix (the flag is then eventually set when you access the IsIdentity property).
If you use the Matrix3D.Identity static property, the flag will get set to the correct value immediately and the results will be the expected:
static void Main(string[] args)
Point4D testPoint = new Point4D(1.0, 2.0, Double.NaN, 4.0);
Matrix3D testMatrix = Matrix3D.Identity;
var testResult1 = Point4D.Multiply(testPoint, testMatrix);
Console.WriteLine(testResult1.ToString());
var b = testMatrix.IsIdentity;
var testResult2 = Point4D.Multiply(testPoint, testMatrix);
Console.WriteLine(testResult2.ToString());// 1, 2, NaN, 4
Console.ReadKey();
Hope that helps.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. Please don't post several questions in the same thread.

Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.

Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.
iMac, OS X Mountain Lion (10.8.4), trying to get Logic Pro X

Hello jst84,
The following article may be helpful in getting your purchase to complete.
Mac App Store: "An unknown error occurred (100)" when purchasing
http://support.apple.com/kb/TS3637
Cheers,
Allen

IPhoto behaviour with Albums

can anyone explain or point me in the direction of the reaoning behind iphotos behaviour with Albums and Smart Albums in 2 situations.
the first, is when using Airpics App and Server, the second when viewing a shared library.
my set up is my iPhoto main DB is on a headless Mini. I also have a MBP on the same wireless network that view and controls the Mini.
in situation 1, when my iPad views my Minis library via thr Airpics apps, it says it only views Albums and Smart Albums, not Events but i can see an item that is an event. it consequently is the last full import i do so is the last import considered an album or smart album?
in 2, when i view my Mini iPhoto DB on my MBP via sharing, lots of Albums and Smart Albums come up from the past that i have deleted. Where is it gettign this info from? is it old stuff from the Minis DB coming through? Or are these current or old stuf from my MBP somehow? when i open the Minis DB on my MBP using Alt-Open and selecting the DB Directly instead of over sharing, these Albums / Smart Albums dont exist. i only see what i expect to see, Currwnt set up..

thank you again Terence.
you see ma bit of an iPhoto Guru, Terence and i dont know how else to contact you and i know its niot right to change a thread half way through but do you have any knowledge on the best way to handle this situation:
i have my iphoto on my headless Mini, controlled by MBP remotely and within the same Wi fi network when home. Iphoto over both is unusably slow. How could i combat this? im told not to use the Mini Library via MBP sleected via ALT when opening as if WiFi drops out it can corrupt. If i use the Sharing from the iPhoto.Mini to MBP, iPhoto.Mini must be open therefore iPhoto.Mini on Sharing on MBP cant be editted, only viewed. The one utility that helps is the iPhoto Manager but all that essentially does is copy from one to another over WiFi so i dont see the difference in that app doing it or me manually doing it, TBH id rather manually do it.
And i need to store the iPhoto main DB at home as iTunes and my iPad use it while i'm not there, and its now too big to carry around on a 5 year old MBP.
I like a lot of others seem lost on how to effectively manage and use iPhoto

Does anyone know if logic 7.1.1 works with Leopard?

Hi does anyone know if logic 7.1.1 works with Leopard?

It's not even compatible with Windows 7 and probably you will find many browser compatibility issues if generating webhelp.
Sorry but time to get Rh11.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

HT1338 Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help neede

Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help needed !

Hello:
I would trot back into the Apple store and have them fix the problem (or call Applecare with a warranty issue). There is no sense in you wasting your time trying to troubleshoot things on a new computer.
Barry

What's the best Mac to run Logic Pro 9 and above with no issues

What's the best Mac to run Logic Pro 9 and above with no issues?

Any Mac that can happily run OS X Snow Leopard 10.6.8 and Logic Pro 9.1.5.....
Note: Newer Macs cannot run Snow Leopard because SL doesn't provide hardware support for the newer hardware found in these newer Macs....
Next best combo for newer Macs is Mavericks 10.9.5 and Logic Pro 9.1.8... but it is nowhere near as efficient a combo as the previous one mentioned...

Strange Logic 8.0.2 Behaviour with CrossFades

Similar Messages

Maybe you are looking for