Strange mouse click behaviour, (GTK?) buttons don't work

Hey,
I have had this problem since the last major upgrade, which included Kernel, Xfce, Xorg. Sadly I can't pinpoint this problem, that's why I wanted to ask if anybody else has the same problem and they have figured out what the cause is.
Essentially this mostly happens with the Xfce panel, while clicking on a Laucher button. I click on a button, which works, then release mouse1, but then the button seems to be still pressed, as if mouse1 was not released. When the mouse leaves the area, the button "pops up" again, but when hovering over the button again, it looks like pressed again, even though it's not.
That's not all that bad, but what happened recently, is while using Eclipse some (very random) buttons simply won't work at all. All this while they seem pressed, even though mouse1 has been released. I then have to use the keyboard to activate the button.
I don't mind the Xfce problem so much, but I need Eclipse for work, and it just can't be the solution that I have to use the Keyboard when a button doesn't seem to work. The problem seems to be limited to button-like (including Tabs) GTK GUI elements. No problem with Qt yet.
This is a laptop computer, with a normal touchpad and a USB mouse attached to it.
And my mouse is NOT broken, as I have tested with a number of different mice and even other OSes on the same machine with same hardware configuration!
Thanks,
m.

This may be related to the issue where buttons in Flash embeds don't work. You can probably 'fix' the issue by downgrading gtk2 to 2.16.5.
## Actually maybe not. Meh.
Last edited by Peasantoid (2009-10-24 21:20:24)

Similar Messages

  • Click wheel and buttons don't work on 5th gen.

    I have had my iPod for about half a year and for some reason my iPod buttons don't work. If I move the hold button it turns on but none of the other buttons work. It charges and everything. Does anyone know what to do?
    5th generation   Windows XP  

    There isn't any problem with your ipod, theres just a different way of going about when you put video games on your ipod. First, plug in your ipod. when your ipod icon appears on the left side where it usually does, click on it. Look at the top on the ipod screen that appears. The screen should give u info about your ipod. At the top look for an icon that says games. Pictures and a few other things are there but click on games. Once that screen appears click on the check mark that say sync games. After that it is pretty self explanatory. GoodLuck

  • Mouse back and forward buttons don't work

    I have a Dell wireless bluetooth mouse. I installed Safari 4, and I like it a lot. I am thinking of ditching IE, but the back and forward buttons on my mouse don't do anything in Safari. It's very frustrating having to click the back button on screen instead of directly on my mouse. The buttons work perfectly in IE and in Windows explorer. I reinstalled the mouse drivers, but to no avail. Any ideas?

    Did u get any software for your mouse? What brand is your mouse? I have Logitech setpoint software, where I can adjust mouse profile, setup mouse buttons action... I also have option (checkbox) to make my mouse use windows generic settings (the one you have in Control Panel under mouse section.
    Now, this is just an idea, but it's good start point.
    What you can also do (if you have such software installed) to uninstall it, restart, and see if Safari back/forward will work. Maybe this software (for some bizarre reason) conflicts Safari default action (as you said you don't have such problem in Fx)
    Let me know if this worked for you.
    Cheers,
    Miki
    EDIT: Before you do all this, maybe it's easier for you (if possible) to try another mouse, to see if you have same issues or not
    Message was edited by: miki69

  • Mouse Clicks' Queue when Button is Disabled

    Hi, I was wondering about the Disable property for UI
    Components.
    In the docs it says that when the component is disabled it
    ignores all
    interaction whatsoever - in particular - user interaction.
    In my case, the button is disabled for a few seconds right
    after it
    was clicked by the user (I disable it till the httprequest is
    returned
    and then enable it).
    What happens is that if the user clicks the button while it's
    disabled
    - nothing happens. But when the button turns enabled - it
    acts as if
    it just got the click event.
    It seems like the mouse click event went into this queue and
    the
    button listened to it right after to turned enable?
    Am I correct? If so - how can I prevent this problem?
    If I'm wrong, what's the reason for this? And again, how can
    I sort
    this so the user can't send mouse clicks to the button when
    it's
    disabled??
    Many thanks :)
    Gilad

    "giladozer" <[email protected]> wrote in
    message
    news:gnbng6$o6m$[email protected]..
    > Hi, I was wondering about the Disable property for UI
    Components.
    > In the docs it says that when the component is disabled
    it ignores all
    > interaction whatsoever - in particular - user
    interaction.
    > In my case, the button is disabled for a few seconds
    right after it
    > was clicked by the user (I disable it till the
    httprequest is returned
    > and then enable it).
    > What happens is that if the user clicks the button while
    it's disabled
    > - nothing happens. But when the button turns enabled -
    it acts as if
    > it just got the click event.
    > It seems like the mouse click event went into this queue
    and the
    > button listened to it right after to turned enable?
    > Am I correct? If so - how can I prevent this problem?
    > If I'm wrong, what's the reason for this? And again, how
    can I sort
    > this so the user can't send mouse clicks to the button
    when it's
    > disabled??
    No idea about whether you're correct or wrong, but you might
    want to try
    setting mouseEvents = false on the button and see if that
    helps.

  • :*(  Form buttons don't work for all testers

    I created a form in Acrobat 9.1 using Forms> Add or Edit Fields. The form contains action buttons for next page and previous page, to clear all fields, and (with the generous help of a fellow forum member) to print the form and save it to disk. I optimized the form with compatibility set to Acrobat 8.0 and later, then enabled it for Reader. I sent this form to several users for testing.
    Those using Acrobat have no problems with it.
    Those using Foxit Reader have no problems with the action buttons or the form fields (except that date fields are finicky; Foxit doesn't convert the dates to the correct format the way Reader or Acrobat do). But, the yellow background that I created as a watermark -- so I could make it visible but not print -- is printing. That's not anything that Acrobat can help, but it is a very good reason to not recommend using Foxit. It would create a dreadful shortage of yellow inkjet ink.
    Those using Reader 8.0 to 8.1.2 are having several problems. For them, the action buttons don't work... except the "clear all fields" one. The buttons don't do anything; there are no errors, no messages, no activity of any kind except to change color when clicked.
    The buttons that don't work are all set up as Mouse Up actions executing a menu item... for example, "Go to page 2" is just View>Go To>Next Page. The "Clear all fields" button is, on Mouse Up, "Reset a form" with all fields selected... so it's the only kind of button that works for Reader users, and it's the only button that doesn't execute a menu item.
    Why is there a difference in actions these users can run? If it's a security issue... what possible risk is there in going to the next page, using a button instead of a scroll bar or Page Down key??? I can find no common sense here, especially because Reader users are the only ones barred from these form actions. Everyone else can use them.
    -- Also, these testers (Reader 8+) are having problems with the tab order. Some of the radio button groups (which have no more than three options, Yes, No and NA) at first appear to be tabbing correctly, because the Yes option receives focus in the correct order... but randomly, tabbing through several fields, suddenly the No option will get focus... in a radio button group nowhere near the current tab location. Tabbing is rendered useless, then, because these anomalies are unpredictable and it doesn't appear there's anything I can do to prevent this from happening.
    It's pointless to delete and re-add the afflicted radio buttons. That has no effect... and the radio button groups are already in the correct order anyway. I don't know how this could possibly happen... But it doesn't happen for the Foxit or Acrobat testers.
    • Why would Reader be the only app that can't use the buttons and can't tab through the fields correctly? I'd think Adobe's own software would work best with their own file format. •
    Is Reader 8 the problem --- should those users all update to the newest version? I don't have any Reader 9+ testers yet. Nobody seems interested in it. The testers all assume the problems are MY fault, so nobody's happy with me and no one wants to bother testing the forms because there's always something wrong.
    <hair-pulling> I seriously regret upgrading to Acrobat 9.1.  I know other forum members who agree this thing is catastrophically buggy -- I've wasted  weeks trying to iron out all the problems I've been having with these forms, forms that should have been quick and simple to create, and in past versions of Acrobat, would have been. Yet I'm still tearing out my hair over tab order! Worse, I fear I'm close to losing my job for all the time wasted and all the projects I've fallen behind in because of this. <no /hair-pulling in sight>

    I have no clue, but it might make a difference depending on the form being produced in Acrobat versus Designer. Acrobat will take you both places and one of them may have an issue with backward compatibility. I have not heard of that, but it is a possibility.

  • Button don't work in datatable

    Hello,
    this a strangely problem. I put a button with actionlistener in a datatable, but this button don't work after i click it. The button outside the datatable works fine. I use ObjectListDataProvider in this datatable. I have tested ObjectArrayDataProvider in datatable too, the button works now. I use JSF 1.1.
    Can anybody help me? Thanks!
    Bo

    Hi BalusC, i have saved the datamodel (a ArrayList) in SessionBean. It can't be null. The rows of table display correct. I don't understand, why functions buttons with ObjectArrayDataProvider, but not with ObjectListDataProvider?
    I found a page with same problem: http://forum.java.sun.com/thread.jspa?threadID=549675&tstart=30

  • Quicktime high cpu, and buttons don't work

    Hi, I'm mainly intending to use quicktime to export files to a readable format by my mp3 player. When I open a movie, click file, export, and then options, none of the bottons in the window will work besides the Fast Start/Fast Start-Compressed Header/Hinted Streaming Settings. All other buttons on the page won't work. They interact to the mouse clicks but nothing changes. This is the only screen that buttons don't work in, its fine with other things in quicktime. The CPU usage for quicktime is really high, always in the 90's, even when nothing is happening. And in task manager, quicktime's priority is automatically set to low, I never did this. It's the only program that acts up like this with the buttons, but other programs' priorities are automatically set to low as well. I've scanned for spyware, adware and viruses. Quicktime used to work, now it doesn't. I didn't change anything. I have quicktime's latest version.
    Thanks,
    Peter

    Send the form to [email protected] and I will have a look.
    Paul

  • "Archive" and "View" buttons don't work after folio update

    Hi all,
    I have a subscription to the professional edition and I have built a custom viewer app for Android. I have built about 10 folios and at first download all is ok, the folios are displayed without problems and the app works fine except for one issue: "Archive" button don't work, when I tap on it, near folio cover, nothing happens, the folio does not disappear from folios list.
    But the serious problem occurs when I perform a folio update from Folio Producer ('Update content' from adobe dashboard DPS): both "Archive" and "View" buttons stop working, nothig happens when I tap tap on them and I am forced to uninstall and reinstall the application on tablet (.apk file) to see folio changes in my custom viewer.
    This is very annoying as well as time expensive.
    Tablet is Samsun Galaxy Tab SII with Android 3.2.
    Any help is appreciated.

    To the best of my knowledge, the SII is a smartphone and not a tablet device, and the official claim is (correct me if I'm wrong) that DPS on Android is corrently tablet only.
    Anyway, it seems strange to me so checked and found out that even though the DPS apps are not available when you search for them in the Play Market of a smartphone you can still force load them to the phone and run them.
    I've done it on both a Samsung SIII running Android 4.0.4 and a Samsung GT-I9070 running Android 2.3.6 (I currently don't have a device running Android 3.2)
    The interface is so small that it's hardly possible to use it, but it works.

  • My Microsoft Intellimouse back and forward buttons don't work in Firefox, but they do in IE and in Windows Explorer. It used to work, now it just stopped. Why and how can I fix this?

    Forward and back buttons don't work in Firefox but do everywhere else.

    Make sure that you set those buttons to the default action in your mouse driver software (Control Panel > Mouse or specific Intellimouse driver software).

  • Buttons don't work

    I am working on a small application.
    My main frame is a public class that defines two buttons in its constructor one for input and the other for feedback.
    The input screen and the feedback screens are defined as inner listener classes of the main class.
    The code compiles fine but the buttons don't work.Please take a look at my code and make suggestions for what I am doing wrong
    Thanks
    import java.awt.*;
    import java.awt.event.*;
    public class project1 extends Frame {
    static Object source;
    static Button input, feedback, apply;
    public project1(){ 
    super("Project Development Coordination System");     
    setSize(500,500);
    setLayout(new BorderLayout());
    //Build and add 1st Panel of project1
    Panel p1 = new Panel(new BorderLayout());
    TextField Title = new TextField();
    Title.setFont(new Font("Sansserif", Font.BOLD, 48));
    Title.setText("HORNSONIC");
    Title.setEditable(false);
    TextField Name = new TextField();
    Name.setFont(new Font("Sansserif", Font.BOLD, 30));
    Name.setText("Hera International, Inc.");
    Name.setEditable(false);
    p1.add(Title, BorderLayout.NORTH);
    p1.add(Name, BorderLayout.CENTER);
    add(p1, BorderLayout.NORTH);
    //Build and add 2nd Panel
    Panel PDCS = new Panel();
    TextField pdcs = new TextField();
    pdcs.setFont(new Font("Sanserif", Font.BOLD, 22));
    pdcs.setText("Project Development Coordination System");
    pdcs.setEditable(false);
    PDCS.add(pdcs);
    add(PDCS, BorderLayout.CENTER);
    //Build and add 3rd Panel
    Panel buttons = new Panel();
    Button input = new Button("INPUT");
    buttons.add(input);
    Button feedback = new Button("FEEDBACK");
    buttons.add(feedback);
    input.addActionListener( new Input());
    feedback.addActionListener(new Feedback());
    add(buttons, BorderLayout.SOUTH);
    addWindowListener(new WindowAdapter(){
    public void windowClosing(WindowEvent event){
         System.exit(0);
    //end of project1()
    //Input class     
    static class Input extends Frame implements ActionListener {
              Input(){
    super("Input");
    setSize(500,500);
    //Build and add FirstPanel of the Frame
    Panel FP = new Panel(new BorderLayout());
    //Build and add northpanel of FP
    Panel np = new Panel(new BorderLayout());
    //Build and add subpanel1 of np
    Panel subpanel1= new Panel();
    Label L1 = new Label("Sample#");
    TextField T1 = new TextField(10);
    T1.setEditable(true);
    Label L12 = new Label("Customer:");
    TextField ctf = new TextField(10);
    ctf.setBackground(Color.gray);
    ctf.setForeground(Color.black);
    ctf.setEditable(true);
    subpanel1.add(L1);
    subpanel1.add(T1);
    subpanel1.add(L12);
    subpanel1.add(ctf);
    //Build and add subpanel2 of np
    Panel subpanel2 = new Panel();
    TextField sub1t = new TextField(10);
    sub1t.setBackground(Color.gray);
    sub1t.setForeground(Color.black);
    sub1t.setEditable(true);
    subpanel2.add(sub1t);
    Label sublabel = new Label("Model#");
    subpanel2.add(sublabel);
    TextField sub2t = new TextField(10);
    sub2t.setBackground(Color.gray);
    sub2t.setForeground(Color.black);
    sub2t.setEditable(true);
    subpanel2.add(sub2t);
    np.add(subpanel1, BorderLayout.NORTH);
    np.add(subpanel2, BorderLayout.CENTER);
    FP.add(np, BorderLayout.NORTH);
    //Build and add centerpanel of FP
    Panel cp = new Panel(new BorderLayout());
    //Build and add subcenter1 of centerpanel
    Panel subcenter1 = new Panel(new BorderLayout());
    Panel NP = new Panel();
    Label Project = new Label("Project Scope");
    NP.add(Project);
    TextField PS = new TextField(10);
    PS.setBackground(Color.gray);
    PS.setForeground(Color.black);
    PS.setEditable(true);
    NP.add(PS);
    Label Appl = new Label("Application:");
    NP.add(Appl);
    TextField Price1 = new TextField(10);
    Price1.setBackground(Color.gray);
    Price1.setForeground(Color.black);
    Price1.setEditable(true);
    NP.add(Price1);
    subcenter1.add(NP, BorderLayout.NORTH);
    Panel CP = new Panel();
    Label TP = new Label("Target Price-");
    CP.add(TP);
    TextField appl = new TextField(10);
    appl.setBackground(Color.gray);
    appl.setForeground(Color.black);
    appl.setEditable(true);
    CP.add(appl);
    Label quote = new Label("Quoted Price-");
    CP.add(quote);
    TextField Q = new TextField(10);
    Q.setBackground(Color.gray);
    Q.setForeground(Color.black);
    Q.setEditable(true);
    CP.add(Q);
    subcenter1.add(CP, BorderLayout.CENTER);
    cp.add(subcenter1, BorderLayout.NORTH);
    //Build subcenter panel of cp
    Panel subcenter = new Panel(new GridLayout(1,3));
    List list = new List (3,true);
    list.addItem("Woofer:");
    list.addItem("Mid:");
    list.addItem("Tweeter");
    subcenter.add(list);
    TextArea inches = new TextArea(3,5);
    inches.setBackground(Color.gray);
    inches.setForeground(Color.black);
    inches.setEditable(true);
    subcenter.add(inches);
    List list1 = new List(3, true);
    list1.addItem("Count-");
    list1.addItem("Count-");
    list1.addItem("Count-");
    subcenter.add(list1);
    TextArea count = new TextArea(3,5);
    count.setBackground(Color.gray);
    count.setForeground(Color.black);
    count.setEditable(true);
    subcenter.add(count);
    List list2 = new List(3, true);
    list2.addItem("Materials:");
    list2.addItem("Materials:");
    list2.addItem("Materials:");
    subcenter.add(list2);
    TextArea materials = new TextArea(3,5);
    materials.setBackground(Color.gray);
    materials.setForeground(Color.black);
    materials.setEditable(true);
    subcenter.add(materials);
    cp.add(subcenter, BorderLayout.CENTER);
    FP.add(cp, BorderLayout.CENTER);
    //Build and add southpanel of FP
    Panel sp = new Panel();
    TextArea comments = new TextArea("Comments:", 3,30);
    sp.add(comments);
    FP.add(sp, BorderLayout.SOUTH);
    add(FP, BorderLayout.NORTH);
    //Build and add SouthPanel of Frame
    Panel SP = new Panel();
    List l1 = new List(8,true);
    l1.addItem("Quote Requested:");
    l1.addItem("Quote to be completed by:");
    l1.addItem("Sample Requested:");
    l1.addItem("STd sent to Factory:");
    l1.addItem("Factory estimated ETD:");
    l1.addItem("Revised ETD#1:");
    l1.addItem("Revised ETD#2:");
    l1.addItem("Revised ETD#3:");
    SP.add(l1);
    TextArea dates1 = new TextArea(8,8);
    dates1.setBackground(Color.gray);
    dates1.setForeground(Color.black);
    dates1.setEditable(true);
    SP.add(dates1);
    List l2 = new List(8, true);
    l2.addItem("Days Quote overdue:");
    l2.addItem("Date Quote Received:");
    l2.addItem("Actual ETD:");
    l2.addItem("Sample Arrival Date:");
    l2.addItem("Days Sample overdue:");
    l2.addItem("Days in Development:");
    l2.addItem("Date sent to customer:");
    l2.addItem("Actual Days to customer:");
    SP.add(l2);
    TextArea dates2 = new TextArea(8,8);
    dates2.setBackground(Color.gray);
    dates2.setForeground(Color.black);
    dates2.setEditable(true);
    SP.add(dates2);
    add(SP, BorderLayout.SOUTH);
    //Build and add CenterPanel of Frame
    Panel TD = new Panel();
    TextField td = new TextField("TIME IN DEVELOPMENT");
    TD.add(td);
    add(TD, BorderLayout.CENTER);
              addWindowListener(new WindowAdapter(){
    public void windowClosing(WindowEvent event){
         System.exit(0);
    }// end of input()
    public void actionPerformed(ActionEvent Event)
    Object source = Event.getSource();
    if (source == input){
                   new Input();
                   setVisible(true);
    }//end of input if
              }//end of actionPerformed.
         }//end of class input
    //Feedback class
    static class Feedback extends Frame implements ActionListener{
    Feedback(){
    super("Feedback");
    setSize(500,500);
    //Build and add panel 1.
    Panel p1 = new Panel(new BorderLayout());;
    //Build and subpanel off panel 1
    Panel subpanel1= new Panel();
    Label L1 = new Label("Sample#");
    TextField T1 = new TextField(10);
    T1.setEditable(true);
    Label L12 = new Label("Customer:");
    TextField ctf = new TextField(10);
    ctf.setBackground(Color.gray);
    ctf.setForeground(Color.black);
    ctf.setEditable(true);
    subpanel1.add(L1);
    subpanel1.add(T1);
    subpanel1.add(L12);
    subpanel1.add(ctf);
    Panel subpanel2 = new Panel();
    TextField sub1t = new TextField(10);
    sub1t.setBackground(Color.gray);
    sub1t.setForeground(Color.black);
    sub1t.setEditable(true);
    subpanel2.add(sub1t);
    Label sublabel = new Label("Model#");
    subpanel2.add(sublabel);
    TextField sub2t = new TextField(10);
    sub2t.setBackground(Color.gray);
    sub2t.setForeground(Color.black);
    sub2t.setEditable(true);
    subpanel2.add(sub2t);
    p1.add(subpanel1, BorderLayout.NORTH);
    p1.add(subpanel2, BorderLayout.CENTER);
    add(p1, BorderLayout.NORTH);
    //Build and add Panel 2
    Panel p2 = new Panel(new BorderLayout());
    //Build and add subcenter1 of Panel 2.
    Panel subcenter1 = new Panel(new BorderLayout());
    //Build subpanels of subcenter 1.
    Panel NP = new Panel();
    Label Project = new Label("Project Scope");
    NP.add(Project);
    TextField PS = new TextField(10);
    PS.setBackground(Color.gray);
    PS.setForeground(Color.black);
    PS.setEditable(true);
    NP.add(PS);
    Label Appl = new Label("Application:");
    NP.add(Appl);
    TextField Price1 = new TextField(10);
    Price1.setBackground(Color.gray);
    Price1.setForeground(Color.black);
    Price1.setEditable(true);
    NP.add(Price1);
    subcenter1.add(NP, BorderLayout.NORTH);
    Panel CP = new Panel();
    Label TP = new Label("Target Price-");
    CP.add(TP);
    TextField appl = new TextField(10);
    appl.setBackground(Color.gray);
    appl.setForeground(Color.black);
    appl.setEditable(true);
    CP.add(appl);
    Label quote = new Label("Quoted Price-");
    CP.add(quote);
    TextField Q = new TextField(10);
    Q.setBackground(Color.gray);
    Q.setForeground(Color.black);
    Q.setEditable(true);
    CP.add(Q);
    subcenter1.add(CP, BorderLayout.CENTER);
    p2.add(subcenter1, BorderLayout.NORTH);
    //BUILD and add subcenter to Panel 2);
    Panel subcenter = new Panel();
    List list = new List (3,true);
    list.addItem("Woofer:");
    list.addItem("Mid:");
    list.addItem("Tweeter");
    subcenter.add(list);
    TextArea inches = new TextArea(3,5);
    inches.setBackground(Color.gray);
    inches.setForeground(Color.black);
    inches.setEditable(true);
    subcenter.add(inches);
    List list1 = new List(3, true);
    list1.addItem("Count-");
    list1.addItem("Count-");
    list1.addItem("Count-");
    subcenter.add(list1);
    TextArea count = new TextArea(3,5);
    count.setBackground(Color.gray);
    count.setForeground(Color.black);
    count.setEditable(true);
    subcenter.add(count);
    List list2 = new List(3, true);
    list2.addItem("Materials:");
    list2.addItem("Materials:");
    list2.addItem("Materials:");
    subcenter.add(list2);
    TextArea materials = new TextArea(3,5);
    materials.setBackground(Color.gray);
    materials.setForeground(Color.black);
    materials.setEditable(true);
    subcenter.add(materials);
    p2.add(subcenter, BorderLayout.CENTER);
    //Build and add south subpanel of Panel 2
    Panel subpanel = new Panel();
    Label L2 = new Label("Sample Disposition:");
    subpanel.add(L2);
    TextField T2 = new TextField(10);
    T2.setEditable(true);
    subpanel.add(T2);
    Label l2 = new Label("Date:");
    subpanel.add(l2);
    TextField t2 = new TextField(10);
    t2.setEditable(true);
    subpanel.add(t2);
    TextArea TF = new TextArea("Feedback:",3,30);
    TF.setEditable(true);
    subpanel.add(TF);
    p2.add(subpanel, BorderLayout.SOUTH);
    add(p2, BorderLayout.CENTER);
    //Build and add Panel 3.
    Panel p3 = new Panel();
    Label L3 = new Label("Project Continued on Revision#:");
    TextField T3 = new TextField(10);
    T3.setEditable(true);
    Label l3 = new Label("Order Placed:");
    TextField t3 = new TextField(10);
    t3.setEditable(true);
    p3.add(L3);
    p3.add(T3);
    p3.add(l3);
    p3.add(t3);
    add(p3, BorderLayout.SOUTH);
    setVisible(true);
    addWindowListener(new WindowAdapter(){
    public void windowClosing(WindowEvent event){
         System.exit(0);
    }//end of Feedback()
    public void actionPerformed(ActionEvent AE){
    if (AE.getSource() == feedback){
    new Feedback();
         setVisible(true);
    }//end of feedback if
    }//end of actionPerformed
    }//end of class Feedback
    public static void main (String args[]){
         project1 window = new project1();
         window.setVisible(true);
         //end of main
    }//end.

    I compiled and did run your code....
    it seems you are trying to implement a Frame with two buttons... each time the user click on a button, the main frame displays the equivalent panel with a set of components .. isn�t it ?
    well... some tips:
    1 - Why don�t you use a JTabbedPane ? a much better container than a simple Frame....
    2 - If you really need to use a Frame as a container of multiple forms.. then you should take a look in the java.awt.CardLayout
    other tip: don�t use the Frame component as the same class as the ActionListener.. divie these comopnents in two classes...

  • Chrome, buttons don't work suddenly, Captivate 7 html5

    Chrome, buttons don't work. Captivate 7, why did buttons suddenly stop working in chrome (and click boxes too.) HTML5
    I installed the patch in June. Since then I made a lesson and published it to a Moodle server. It works in IE and Chrome fine.
    Lessons from 2013 work fine still on that server.
    New lesson from a different template works in IE but not in Chrome. End user can't get audio in IE, would use Chrome but buttons don't work! You can see the html selection box and they depress(plain buttons, can see the overlay when you click) but they don't take any action. I can click and type in a text box if that helps?
    So I created a couple of test projects:
    one from the new 2014 template, copied over some 2013 slides and buttons.
    One from 2013 template, copied in some 2014 slides and buttons.
    Good mix of each. Made export settings match.
    Posted to Moodle in new course. Posted to old course, to make sure it wasn't Moodle related, they are on the same server.
    Two variations every way I could.
    Buttons do not work in Chrome. Everything works in IE.
    I had created an extra lesson for the 2013 course this month and posted it with the same software to the same server, that works in Chrome.
    It was made after a software update (to 701-237 June 2014, Windows system, hasn't changed since).
    Then I opened, republished and uploaded a lesson from last year. Doesn't work in Chrome. ?!?
    What happened to my BUTTONS! I don't know what else to try.
    ps Moodle was getting a manifest error when i tried to publish as scalable html. Moodle takes it  when I don't.
    Yes I deleted the layouts folder when I updated. Did it again today to be sure. No improvement.

    Hey there's a solution to this (he says answering his own question)
    Someone else posted earlier that latest version of Chrome hung and buttons didn't work (I hate Adobe forum search since I know I checked keywords before posting mine, but whatever)
    https://forums.adobe.com/message/6573330#6573330
    They got a response:
    http://captivatedev.com/2014/07/20/html5-captivate-projects-freezing-google-crome-v-36/
    that has to do with two deprecated functions being removed by new Chrome, affecting Javascript.
    http://blogs.adobe.com/captivate/2014/07/update-on-captivate-html-5-content-playback-issue -in-google-chrome-browser.html
    Offers a manual fix and also updated that page with link to an adobe fix:
    So you can patch Captivate 7 and 8 and make Chrome your friend again!
    I've just installed it and previewed a project in my default (Chrome) browser. Success!

  • Minimized & Close buttons don't work !!!

    hallooooo
    when i click on the button of minimized while another form is runing ,,, it don't work !!
    and return to the normal mode !!!!
    note ,, i make the minimized allowed (yes).....
    & the close button don't work too !!
    what can i make to make them works by wizerd or programaticly !!
    my thanx
    Shenouda Bertel

    hallo yogesh !!
    First of all i wanna thank you for your care
    with my problem ..
    & that you give me ur time . thinking & writing to me !!
    i'm soo thanxs !!
    now ...
    about my first problem ..is that ..
    in the main menu there is buttons ..
    every one link to a form , by Open_form ...
    And it works well ...
    but when i navegate the new open form ..
    and when i wanna to minimize it ....
    its not minimized but get it normal !!
    ... that's make the user angry !! ..
    i will be waiting for your solve !!
    yours
    Shenouda Bertel

  • Horizontal Dropdown Menu Buttons DON'T WORK

    Any suggestions please?!
    I am a novice Flash Developer and I created a horizontal
    drowndown menu in Flash with rollover submenus. The dropdown menu
    has buttons with Behaviors assigned to "go to webpage". The
    published .swf file works fine, links and all. It is only when I
    place the menu inside a Dreamweaver DIV that exists over another
    image DIV that the buttons don't work. The menu will drop down and
    can be rolled over, but it is when I try to click on the buttons to
    activate the links that nothing functions.
    It is worth mentioning that the buttons have an assigned "Down"
    state that doesn't activtate, so I know the buttons are incapable
    of even being clicked on. The problem is within Dreamweaver,
    not the flash movie menu. Perhaps I am overlooking a widely know
    trick to making this work? Am I missing a simple line of HTML??
    Anybody have any experience with this?
    Greatly Appreciated

    Hi,
    May I please have the URL of the site and any specific pages you'd like me to take a look at?

  • Rotating Menu - Buttons don't work inside MC's

    Hello,
    This is my first post here and it would be great if I could
    have your help to solve this little problem:
    Flash CS3 | AS2 | Rotating Menu
    I'm creating a small animation in which I have a clock-like
    rotative menu.
    I found the code for this in the internet and made some few
    adjustments (mainly just took somethings I didn't needed out)
    In my file I have 6 circles that are all movieclips that make
    part of a circular menu that rotates everytime you click on one of
    the circles. Those movieclips are not on the stage, only on the
    library, and are being "pulled" into action by the actionscript.
    I need those movieclips to act as menu buttons, so I made a
    button inside each one of them.
    The problem is that the buttons don't work. They don't do
    what they are suppose to (load another movieclip). The solution
    must be quite simple because it doesn't make sense not to work, but
    I'm unable to get it...
    In the original file they worked as buttons that linked to an
    URL but I removed that because I didn't need it. Just need them to
    act as normal buttons and play another MC...
    Do you have any idea why this happens?
    Does it have anything to do with the fact that the circle
    movieclips that contain the buttons are not actually on the stage?!
    The code I'm using in the buttons is rather simple:
    on(release){
    movie1.play();
    I would appreciate your help on this!
    Thank you,

    Hi Odisey2,
    I appreciate the time you took to try to help me!
    I only have 1 frame in my stage, and its the one that
    contains the actioscript code.
    I also have on stage the MC i'm trying to make the button
    play. The first frame of that MC is empty and has a stop, so that
    its not visible at first.
    Then I wanted that when you click the button (the onde that
    is inside the MCs that are being "pulled" by the code I sampled) it
    would play that MC on stage.
    The code I'm using in the burron is pretty simple:
    on(release){
    movie1.play();
    I've tried to put "_root" before, like this: "_root.movie1"
    but it doesn't work as well.
    Any other idea?
    Do you think it has anything to do with the fact that the
    circle movieclips that contain the buttons are not actually on the
    stage?!
    Thanks,

  • My Finder is going crazy.  Keep getting a message saying it quit unexpectedly and asking if I want to restore windows, but I can't get it to stop.  buttons don't work.

    My Finder is going crazy.  Keep getting a message saying it quit unexpectedly and asking if I want to restore windows, but I can't get it to stop.  buttons don't work.

    Something else you can try.
    In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.finder.plist. Move the .plist to your desktop.
    Restart and test. If it works okay, delete the plist from the desktop. 
    If the same, return the .plist to where you got it from, overwriting the newer ones.
    If you want to make your user library permanently visible, run the below command in Applications/Terminal.
    chflags nohidden ~/Library/
    You will need to do that after any updates.

Maybe you are looking for