Strange network issue

Suddenly within the past couple of days I am no longer able to have network access in anything including mail, ichat, terminal, and any other piece of software with the exception of web browsers. I have not seen something like this before and was wondering wether it would be a port block from campus internet or wether it is something local.
I ran a ping for a while to see what would happen...
"ping www.apple.com
PING www.apple.com.akadns.net (17.112.152.32): 56 data bytes
^C
--- www.apple.com.akadns.net ping statistics ---
300 packets transmitted, 0 packets received, 100% packet loss"
It seems that the ip address was fetched, but now what...?
However when looking for local machines there were good results returned...
Any ideas?
Thank you
powerbook 15 1.67   Mac OS X (10.4.3)  

You might like to also try some "traceroute" tests to see how far requests are getting.
If for instance you can browse to a site but you can't ping (or traceroute) to it I'd suspect that there is a proxy server between you and the outside world.
Alos, contact somebody that looks after the campus network to find out what changes they have made recently.
Graham

Similar Messages

  • Really strange network issue that is specific to OS X 10.6.8

    Really strange network issue that is specific to OS X 10.6.8 on both 2 iMacs and an older intel Mac Pro.
    Any system running 10.6.8 is achieving on average 15 –20 mb a sec transfer rates regardless of drive speeds, cables, network activity etc.. I've spent some time removing any cable , drive speed, router issues to the point where one machine dual boots into both 10.6.8 and 10.6.5
    The 10.6.5 system has network speeds of 60mb – 80mb p/sec transfer rates.
    Our older 10.5.8 PPC mac gets 80mb and my 2011 Macbook Pro 10.7.2 hits 60mb – 80mb consistently as well.
    Any idea what the cause is?
    Cheers

    Since your other Mac running 10.5.8 is not affected, you know that your AirPort router is functioning correctly.
    What changed on your Mac? This seems like a post for either the Mac OS X v10.6 Snow Leopard support area, or the support area for your model of Mac.
    We normally handle questions about the AirPort Express, AirPort Extreme or Time Capsule in this area, but you can certainly wait to see if you receive a response here.

  • Very Strange Network Issue With Two Guests on 2012 R2 Hyper-V Failover Cluster

    Hi all.  We're having a odd issue with two guests on our 2012 R2 failover cluster.  
    In a nutshell, if we shutdown a particular server (I'll call it Server A) another totally different server (Server B) on the same node loses it's network connectivity to the domain. If we start server A back up, network connectivity returns on server B.
    At first I thought server A might be running a service that was somehow linked to server B, so I decided to disable server A's NIC.  Interestingly, that had no affect on server B's connectivity.  
    The next step I tried was pausing server A and again, no adverse affect on server B's connectivity.  
    Next step was to live migrate server A to another node.  This action did
    cause server B to lose its network connection. 
    One other clue is that if I ping server B from either of the Hyper-V hosts in the cluster, I never lose network connection to server B.
    So I would suspect this is some network issue on the cluster, but I'm kind of at a loss where to go from here.  
    Has anyone seen this behavior before or does anyone have any troubleshooting suggestions I can try?
    Thanks! 
    George Moore

    Hi Sir,
    I'v never seen this before .
    >>Next step was to live migrate server A to another node.  This action did
    cause server B to lose its network connection. 
    They are connecting to same virtual switch ?
    First please run cluster validation to check if there is any error .
    If it is ok , please try the following items for troubleshooting :
    1. shutdown  serverA   serverB
    2. then add another virtual NIC for serverB
    3. start server B  check if the issue happens to both "old" and "new" virtual NIC .
    In addition , you can live migrate both A and B to another node , then try to live migrate A to the original node .
    If the issue persists , I would suggest you to remove that virtual switch on both nodes then re-create them .
    Best Regards,
    Elton Ji
    If it is not the answer please unmark it to continue
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Strange Networking Issue with OES

    Since moving our entire infrastructure from Netware to OES, I've been trying to figure out a very strange issue. We are a K-12 school system with a data center at the central offices and a single server at each school. The data center has the servers that run all the centralized stuff, including the Master replicas for [root], the DA's for SLP, etc. We noticed that sometimes a school's server will drop out of the SLP tables. When that happens, we also cannot SSH to the school's server from the central servers. We can SSH to it from any other machine on the same subnet as the central servers. The central servers can ping it, but no UDP/TCP traffic can pass between them (no web traffic, etc). We finally realized it only happens when the ISP that serves that school has a brief blip or outage of some sort. The only way we have found to get the servers talking again is to reboot the central servers.
    We have tried:
    Restarting almost all services on central servers
    Stopping and restarting networking
    Switching to runlevel 1 and then back
    Stopping firewall and/or shutting it off completely
    Checking hosts.deny files
    Disabling virus scanner (McAfee Enterprise)
    Changing vmware network drivers from E1000 (known issue with vSphere 5.1) to VMXNET3
    All servers run on HP Proliant servers (blades at central office, towers at schools) running vSphere 5.1. Links between the central office and schools are all 100Mbps fiber via two different ISP (depending on the school's location). A restart of the central office server fixes it every time. I am out of ideas now and at a loss as to why this happens when a WAN link goes down. We thought it was just isolated to one ISP, but it was just that that particular ISP is not quite as reliable as the other. We had an extended power outage at a school served by another ISP over the weekend and saw the same issue with that server after power was restored.
    Any ideas or suggestions at where else we should be looking? We also run ZCM 11 at each school and the central office. When this happens, those servers never lose connectivity with each other and with the OES servers on each end. The ZCM servers run on the same vSphere host as the OES servers.

    On 04/08/2014 12:26 PM, jmlester wrote:
    >
    > Since moving our entire infrastructure from Netware to OES, I've been
    > trying to figure out a very strange issue. We are a K-12 school system
    > with a data center at the central offices and a single server at each
    > school. The data center has the servers that run all the centralized
    > stuff, including the Master replicas for [root], the DA's for SLP, etc.
    > We noticed that sometimes a school's server will drop out of the SLP
    > tables. When that happens, we also cannot SSH to the school's server
    To be clear, while i think this correlation is possible, I do not see any
    possibility of causality in here unless your SSH client is somehow using
    SLP to resolve the SSH server, which seems very unlikely. I'm not sure if
    you're trying to state that SLP is the cause of the SSH stuff, but I do
    not think you are.
    > from the central servers. We can SSH to it from any other machine on
    > the same subnet as the central servers. The central servers can ping
    > it, but no UDP/TCP traffic can pass between them (no web traffic, etc).
    Hmmm........... so routing works, and the server is even responding to
    requests made to it (presumably, or something else is), but SSH is not
    responding, or something is preventing it from responding.
    > We finally realized it only happens when the ISP that serves that school
    > has a brief blip or outage of some sort. The only way we have found to
    > get the servers talking again is to reboot the central servers.
    >
    > We have tried:
    >
    > - Restarting almost all services on central servers
    > - Stopping and restarting networking
    > - Switching to runlevel 1 and then back
    > - Stopping firewall and/or shutting it off completely
    > - Checking hosts.deny files
    > - Disabling virus scanner (McAfee Enterprise)
    > - Changing vmware network drivers from E1000 (known issue with vSphere
    > 5.1) to VMXNET3
    >
    >
    > All servers run on HP Proliant servers (blades at central office, towers
    > at schools) running vSphere 5.1. Links between the central office and
    > schools are all 100Mbps fiber via two different ISP (depending on the
    > school's location). A restart of the central office server fixes it
    > every time. I am out of ideas now and at a loss as to why this happens
    > when a WAN link goes down. We thought it was just isolated to one ISP,
    > but it was just that that particular ISP is not quite as reliable as the
    > other. We had an extended power outage at a school served by another
    > ISP over the weekend and saw the same issue with that server after power
    > was restored.
    >
    > Any ideas or suggestions at where else we should be looking? We also
    > run ZCM 11 at each school and the central office. When this happens,
    > those servers never lose connectivity with each other and with the OES
    > servers on each end. The ZCM servers run on the same vSphere host as
    > the OES servers.
    I'd get a LAN trace from both sides at the same time. At the very least,
    run tcpdump as shown below on both the central office machine as well as
    the remote machine to see how the packets differ when trying different
    things. If you do a test and do not see output on both sides, do it again
    writing it to a file and post somewhere for us to review. Note: since
    it's an SSH problem I would either NOT SSH into the system, or I'd be sure
    to limit the tcpdump capture/output to something specific to the
    connection being tested. Tracing something over which you are sending the
    tracing data is never fun since every packet picked up causes another
    packet to be generated, to be picked up, to be generated.... ad infinitum.
    To see tcpdump output with limited details on the screen:
    Code:
    sudo /usr/sbin/tcpdump -n -s 0 -i any -vv
    To write tcpdump output to a file:
    Code:
    sudo /usr/sbin/tcpdump -n -s 0 -i any -w /tmp/problem-20140408.cap
    While filtering when capturing is typically not desired, you can do it by
    adding something like 'host 10.1.2.3' to the list of tcpdump parameters at
    the end of either of those two commands. The reason filtering during
    capturing is not desired is that you may miss something.... the SLP
    traffic, DNS, ARP, ICMP error showing the exact problem, etc.
    Good luck.
    If you find this post helpful and are logged into the web interface,
    show your appreciation and click on the star below...

  • Sharing ended due to network issues

    I have a strange issue with one Lync 2010 user in that she is not able to stay in a desktop or app sharing session for more than 2-3 minutes.  Without fail, after a couple minutes she will get kicked out of the session with the error "Sharing
    ended due to network issues".  She can then rejoin the session, but will get dropped again a couple minutes later.  None of our other users seem to have this issue.
    I've read other posts on the error, and most seem to involve Edge server configuration.  However this sharing is happening only internally, so there is no Edge server involved.  I've also read that Citrix Edgesight can cause this, but we don't
    have the agent deployed.
    I've looked at her client logs, and I see a lot of these types of errors around the time of the issue:
    SIP_URL::ParseUrlParams invalid char M found when trying to parse params
    SIP_URL::ParseUrlBase ParseSipUrlParams failed 80004005
    I'm not sure that these errors are directly related to the problem though.
    Any suggestions would be appreciated.

    Hi,
    Did the issued Lync user use the same type of SIP name with others?
    Please try to change the type of the issued user’s Lync account such as user’s email address or specify a sip uri to have a try.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Strange networking question

    I have two computers (they are called IOMS-design and Beast).  I'm trying to connect the two using shared variables and front panel binding.
    When I set up the Beast as the server, it works fine.  Everything binds to the variables on Beast.
    However, this is the opposite of what we want, so we tried to reverse it.  This is where the strangeness comes in.  IOMS-design can see everything on itself and the Beast, but the Beast can only see it's own contents, not IOMS-design's. I've attached two images to illustrate my problem.
    I don't think it's strictly a Windows networking issue because the computers can see each other in the Networking window on Windows.  Also, like I said, it works with the data going one way, but not the other.
    I think it's a LabVIEW configuration issue because of this.
    FYI both computers are running Vista and LV8.6.0
    Message Edited by elset191 on 02-20-2009 09:03 AM
    Tim Elsey
    LabVIEW 2010, 2012
    Certified LabVIEW Architect
    Attachments:
    Beast-view.jpg ‏36 KB
    IOMSDesign-view.jpg ‏41 KB

    Nevermind.
    Somehow I overlooked the fact that Beast had Norton
    Tim Elsey
    LabVIEW 2010, 2012
    Certified LabVIEW Architect

  • Mobile network issue, mobile network issue

    Hi,
    On my iPhone 4s with latest IOS 7.0.4, i have network issue
    I am on Airtel Maharashtra Network (India)
    when ever I come out from low network or no network area, my phone does not automatically search the mobile network.
    but there is a strange thing, the phone shows full network even if there is no network or low network.
    I need to put the phone on Aeroplane mode and then put it on normal mode. then only my phone searches for network.
    most of my friend and relatives complaint me, that my phone is not reachable due to this issue.
    I did not faced this issue on IOS 6.
    Also messages are not sent even if the mobile network is available.
    Also the keyboard lacks quick responce.
    Request to Apple IOS to find the solution on this issue.

    Hi thanks for the reply.
    I already have an Iphone 3gS, the same Airtel network card works perfectly fine with the phone. and I do not face any problem with the reciption.
    the problem is only with Iphone 4s and with IOS7
    Also I tried Iphone 4s with different service provider (Idea) I face the same problem.
    Do you still say its airtel issue.

  • Can't access root share sometimes and some strange performance issues

    Hi :)
    I'm sometimes getting error 0x80070043 "The network name cannot be found" when accessing \\dc01 (the root), but can access shares via \\dc01\share.
    When I get that error I also didn't get the network drive hosted on that server set via Group Policy, it fails with this error:
    The user 'W:' preference item in the 'GPO Name' Group Policy Object did not apply because it failed with error code '0x80070008 Not enough storage is available to process this command.' This error was suppressed.
    The client is Windows Server 2012 Remote Desktop and file server is 2012 too. On a VMware host.
    Then I log off and back on, and no issues.
    Maybe related and maybe where the problem is: When I have the issue above and sometimes when I don't (the network drive is added fine) I have some strange performance issues on share/network drive: Word, Excel and PDF files opens very slowly. Offices says
    "Contacting \\dc01\share..." for 20-30 sec and then opens. Text files don't have that problem.
    I have a DC02 server also 2012 with no issues like like this.
    Any tips how to troubleshoot?

    Hi,
    Based on your description, you could access shares on DC via
    \\dc01\share. But you couldn’t access shares via \\dc01.
    Please check the
    Network Path in the Properties of the shared folders at first. If the network path is
    \\dc01\share, you should access the shared folder by using
    \\dc01\share.
    And when you configure
    Drive Maps via domain group policy, you should also type the Network Path of the shared folders in the
    Location edit.
    About opening Office files very slow. There are some possible reasons.
     File validation can slow down the opening of files.
     This problem caused by the issue mentioned above.
    Here are a similar thread about slow opening office files from network share
    http://answers.microsoft.com/en-us/office/forum/office_2010-word/office-2010-slow-opening-files-from-network-share/d69e8942-b773-4aea-a6fc-8577def6b06a
    For File Validation, please refer to the article below,
    Office 2010 File Validation
    http://blogs.technet.com/b/office2010/archive/2009/12/16/office-2010-file-validation.aspx
    Best Regards,
    Tina

  • Strange client issue since updating to Server 10.6.6

    We updated our Server to 10.6.6 last weekend. Since then our managed clients have been exhibiting strange network login behavior. We manage our mac laptops via groups in Workgroup manager and our OD is bound to AD.
    Example of issue:
    - client computer is set to auto logon with password in the client system preferences with an Active Directory account. When the user goes to browse the network they automatically get logged on to volumes. Logging out of the server by dragging volume to trash does not rectify as browsing the network produces the same results. When logging off of the network, the next time the network is browsed the server should have to be logged on to again, but is not. If I disable autologon, the same issue exists. If I then log on with a different network account, accessing network volumes acts correctly and I am prompted for a username and password. This is happening on a couple of hundred machines

    having the same problem! hope someone could help asap!

  • SBS2008 Client for Microsoft Network issues

    Hi Everyone,
    I'm working on a client server and was called in after some strange IP issues. I found that Client for Microsoft Networks was missing and am unable to get it reinstalled. 
    Originally, I got an error that a Timeout occurred (I don't have the exact error because it isn't what I'm getting anymore).
    After a bunch of reboots and a few attempts to reset the network stack with netsh (ipv4, ipv6, winsock), I'm now getting an error when I try to install the Client for Microsoft Networks that the RPC call failed.
    The RPC service is running.
    I'm at my wits, end, and at a total loss.
    Can anyone think of any way to magically reinstall Client for Microsoft networks? Powershell? anything? ha.
    Thanks. 

    Well it looks like it found and repaired one thing. Lets reboot and take a look at the network settings. If you can't install the Client again we're gong to go through a little more advanced diagnostic which should be fun :)
    Download the Sysinternals tools procmon,
    http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx this will capture everything the system does so it'll give a ton of information. The steps are as follows.
    1) Open procmon
    2) DONT FILTER ANYTHING, when prompted to click the 'cancel' button on the filter window
    3) Stop the capture (Ctrl+E on the keyboard)
    4) Get to the Networking Properties and do every step to install the Client EXCEPT for the step that throws the error
    5) Start the capture (Ctrl+E)
    6) Trigger the error
    7) Stop the capture
    Save the PML file and upload it.
    -GreenlightTech

  • Strange performance issue with 3510/3511 SAM-FS disk cache

    Hi there!
    I'm running a small SAM-QFS environment and have some strange performance issue on the disk storage part, which somebody here might be able to explain.
    Configuration: one 3510, dual controller, RAID-5 9+1, one hot spare and one disk not configured for whatever reason. The R5 logical drive hosts a 150GB LUN for SAM-QFS metadata (mm in SAM-FS speak) and a 1TB LUN for data (mr in SAM-FS speak). Further, there are two small LUNs (2GB, 100GB) for some other purpose. Those two LUNs have nearly no I/O. All disks are SUN146G. Host connection is 2GBit, multipathing enabled and working.
    Then the disk cache became too small, and the customer added a 3511 expansion unit with SUN300G disks. One logical drive is a RAID-1, 1+1, used for NetBackup catalog. The other is a RAID-5, 8+1, providing two LUNs: 260GB SAM-FS metadata (mm) and 1.999TB SAM-FS data (mr).
    For SAM-FS, the LUNs form two file systems: one "residing" in the 3510, the other "residing" in the 3511 expansion. Cabling is according to the manual and checked several times by several independant people. Operating system is Solaris 10, hardware is a V880.
    The problem we observe: SAM-FS I/O on LUNs on disks inside the 3510 is fine. With iostat, I see 100MB/s read and 50MB/s write at the same time. On the SAM-FS file system which is running on the two LUNs in the 3511, the limit seems to be at 40MB/s read/write. Both SAM-FS file systems are configured the same in regards of block size.
    In case I have activity on both SAM-FS file systems, I see 100MB/s+ on the LUN running inside the controller shelf and another 40MB/s on the disk runnin in the 3511 expansion chassis. So, the controller is easily capable of handling 150MB/s.
    Cache settings in the 3510 controller are default I think (wasn't installed by me), batteries are fine.
    Is this 40MB/s we experience a limitation by the expansion shelf? Don't think so. Anybody has any ideas on this? What parameters to check or to change? Any hint appreciated. I can also provide further details if needed. Thank you.
    wolfgang

    SUN300G disks sound like 300GB FC disks.
    Depending on how many files are in the SAMFS file system, sharing the mm and mr devices on the same RAID array can be a pretty horrible idea. In my opinion and experience, it's almost always better to NEVER put more than one LUN on a RAID array. Period. Putting more than one LUN on an array results in IO contention on that array. And large, unnaturally configured (9+1? Why?) RAID arrays will have problems from the start.
    What are the block sizes used on the RAID arrays? It wouldn't surprise me to see that the RAID array on the expansion tray has a very large block size. Larger block sizes are, in general, not better. Especially for SAMFS metadata - which IIRC is something like 8k or 16k blocks.
    I suspect what is happening is most of the metadata updates are going to the mm device on the new array, contending with the IO operations on the file data.
    How much space is left on each mm device? What does "iostat -sndxz 2" show when you're having the IO problems?

  • How to resolve network issue or dns to access web page on snow leopard server?

    I have my network setup like as follows:
    internet > router 1 > ethernet ports > switch > router 2
    I have a mac osx snow leopard server connected to "router 1", but it is so slow when accessing a web page hosted on the server from a browser on a workstation connected to either router 1 or router 2?
    Is there a problem with my network setup or maybe because I changed the name to newservername.local?

    @Jeff and @Camelot,
    I think it is a DNS issue.  I completely reset the DNS settings on server and the local name with the steps below, but now cannot access the site hosted on the server at all
    I used a modified version of http://www.mkahn.com/2010/09/configuring-dns-on-mac-os-x-10-6-snow-leopard-serve r-for-hosting/ to reset the server set
    1.  Stop DNS Service in Server Admin
    2.  Close Server Admin
    3.  Obtain 10.6 DNS Default files (below)
    4.  Overwrite the DNS files with DNS Default files:
    /etc/dns/loggingOptions.conf.apple
    /etc/dns/options.conf.apple
    /etc/dns/publicView.conf.apple
    /var/named/named.ca/etc/named.conf
    /var/named/named.local
    /var/named/localhost.zone
    5. Restart your server
    All machines have 1ms ping responses within the network including this snow leopard server that I am trying to setup.  There is another test web server that return pages instantly within this network so I doubt it is a network issue, but a DNS issue.

  • Networking Issues after Upgrading to Windows 8.1

    I have a Windows 8 desktop PC that is working fine with my network.  I can browse the Internet fine using all major browsers etc.  After upgrading to Windows 8.1 through the Windows Store I noticed that my wired networking was not working correctly.
     The status of the network does not change (i.e. it doesn't change to Limited Connectivity) however browsing to sites in Chrome, IE or Firefox doesn't work as well as Windows 8.
    IE11 gives me the error "This page can't be displayed, make sure the web address is correct" and other browsers give a similar error.  I normally have to refresh 2-3 times to get a new page to load, sometimes even more.  Everything works
    fine from a laptop connected at the same time so it isn't an network issue with my provider.
    I thought this might be a driver issue with the two on-board Marvell wired network adapters.   I wasn't able to rollback the driver to older versions I found on the Internet.  I then purchased another network card, Intel Desktop gigabit and the
    issue still persists with that adapter.  I then tried a USB wireless adapter and the issue still persists using wifi with the wired adapters disabled.  I tried a new network cable and no luck either.  I also tried resetting the IP stack using
    the various netsh commands.
    After that I thought I might try reset the Windows 8.1 PC, however that didn't work as I didn't have the restore image available as I upgraded from the Windows Store.  I then tried installing Windows 8.1 fresh using a ISO with my Windows 8 key using
    some of the recent guides that are available.  That all worked but it didn't fix the networking issues.
    I re-installed Windows 8.0 and the networking is now fixed and back to working normal again.  I'd like to try again but I think I will have the same problems.  I can't imagine why this would be a driver issue as I tried 3 different network adapters
    and two installs of Windows 8.1.  Any ideas what would be the cause of the Windows 8.1 issue?

    HI,
    Since this issue only occurred in the your desktop PC, and many network adapters you tried, failed, thus I think maybe we should focus on the model of your desktop PC, I suggest you update the BIOS and chipset from the manufacture to improve
    the performance of win8.1.
    Please also test this issue in safe mode with networking.
    Please refer to:
    Windows Startup Settings (including safe mode)
    http://windows.microsoft.com/en-in/windows-8/windows-startup-settings-including-safe-mode
    I’d like to share the following article with you:
    Wired and wireless network problems
    http://windows.microsoft.com/en-IN/windows/network-connection-problem-help#network-problems=windows-81&v1h=win81tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
    Regards,
    Yolanda
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.
    The issue occurs in safe mode as well under Windows 8.1.  The motherboard is an Asus P5B Premium, however it works on Windows 8.  How would I update the chipset when booted into Windows 8.1?  In Device Manager it wasn't allowing me to update
    the network drivers as they were newer versions already installed.
    Edit:  I also installed at Intel Chipset Device software dated 8/8/2013 with version 9.​4.​0.​1026 and the issue still occurs.  I am also running the latest BIOS that is available.

  • IPhone 4s 64GB Network Issues

    I have a iPhone 4s 64GB that has intermident wifi network issues. I have completely restored the phone and am running in factory configuration with only one app installed (ping utility)and am still experiencing the following issue. When using the network (safari, facetime, etc) the network will become unresponsive. If i start a ping from the device the to the network gateway I get no response. If I ping the iPhone from the computer I get no response. If I toggle airplane move on then off everything starts working and the device will start to function normally and respond to pings. This happens continually throughout the day to any network I am connected to. I have received a replacement device and still have the same issue. I have talked to apple numerous times and they still say it is hardware. I have also deployed 100 iphone 4s to our company and hear of similar issues. Has anyone else had this issue or found a resolution? I am a very big advocate of apple products but after this exprience I will no longer be upgrading to the latest and greatest. I have reverted to using my iPhone 4 with ios5 with no issues.
    I have attached the console logs from my iphone that  retrieved from the iPhone configuration utility from a time when the issue was occuring.
    Nov 14 12:07:25 unknown lockdownd[22] <Error>: 0173b000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  0 (ID=103)
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  1 (ID=104)
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -48, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2498, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
    Nov 14 12:07:29 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:07:29 unknown kernel[0] <Debug>:
    Nov 14 12:09:05 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
    Nov 14 12:09:05 unknown kernel[0] <Debug>: pmu wake events: wlan
    Nov 14 12:09:05 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc143bc00]::UIMInitialize - HSIC ports enabled
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
    Nov 14 12:09:05 unknown CLTM[12] <Error>: CLTM: resetting temps: now = 1321290545, last update = 1321290444
    Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983343.00 -300 NO DST in 310
    Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
    Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
    Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
    Nov 14 12:09:05 unknown MobileMail[79] <Warning>: message data temporarily unavailable for messageInfo: (1199, 5)
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
    Nov 14 12:09:06 unknown kernel[0] <Debug>: [95599.463363125]: AppleBCMWLANCore::systemWokenByWiFi(): Wake reason = wlan
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::handleDataPacket(): Wake up packet received: Data
    Nov 14 12:09:06 unknown kernel[0] <Debug>: Wakeup Packet: f0cba106a30c0050568952630800450001793a52400080063c29c0a80012c0a801a101bbccfffd1 21b7bd29b0c2c8018fe27ac9b00000101080a1785f7b13ca56e6f17030101403431c2351e7ee3052 e97886a25233433f1f1457a3c8b132c78c218cd508942bce0325b156c8c17222ab30cb4a99331401 b1d1bc0f1c4b8b21752b218d068570e097065786e60062250a26d351e541f5c291e6220cc053b5fd baa2d7abdbe7224eff815b5154dcb783dce8cd9a00a6da15cf4f5565355a80894f1d68cff527f54b 7ad7423fb8f39093a0ef40acf9c2de6eeb492f8f8ae20bd73b61b3a1b2df30cb982b941217fe8a34 08e01045804dc254da191d4b1f3a9d1cea7b9d192e61eda2473aed4a48f6c178c765b1f82c166521 e22a3a408893216761fa77b9388bcec9b2b8cd519ac9c8b053c00889c95b8003420dbb4561300eaf 6f6a59675db183260039f62eed7afb348d9fb3147238e116ad6ac4f1ebf5b22ee99b1cb92a5c3fb3 d43c25db5bfc761ea0feda538b53bedbaa0f948ac7c63f41822a8c5f882b400 (391 bytes)
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS:  @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -47, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2499, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
    Nov 14 12:09:06 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
    Nov 14 12:09:06 unknown lockdownd[22] <Error>: 00386000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:09:08 unknown timed[2618] <Notice>: (Note ) CoreTime: Want active time in 34.48hrs. Need active time in 117.81hrs.
    Nov 14 12:09:09 unknown MobileMail[79] <Warning>: message data temporarily unavailable for messageInfo: (1199, 5)
    Nov 14 12:09:18 unknown timed[2618] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:09:19 from GPS because time is unchanged
    Nov 14 12:09:23 unknown CommCenter[17] <Notice>: Telling CSI to go low power.
    Nov 14 12:09:25 unknown lockdownd[22] <Error>: 0173b000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  0 (ID=103)
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  1 (ID=104)
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -50, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2523, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
    Nov 14 12:09:29 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:09:29 unknown kernel[0] <Debug>:
    Nov 14 12:11:25 unknown kernel[0] <Debug>: pmu wake events: menu
    Nov 14 12:11:25 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
    Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
    Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
    Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
    Nov 14 12:11:25 unknown CLTM[12] <Error>: CLTM: resetting temps: now = 1321290685, last update = 1321290564
    Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983483.00 -300 NO DST in 310
    Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
    Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
    Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
    Nov 14 12:11:26 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc143bc00]::UIMInitialize - HSIC ports enabled
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
    Nov 14 12:11:26 unknown kernel[0] <Debug>: set_crc_notification_state 0
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS:  @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -48, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2524, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
    Nov 14 12:11:26 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
    Nov 14 12:11:27 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:11:27 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:11:27 unknown lockdownd[22] <Error>: 016b9000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:11:28 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
    Nov 14 12:11:28 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
    Nov 14 12:11:28 unknown timed[2619] <Notice>: (Note ) CoreTime: Want active time in 34.44hrs. Need active time in 117.78hrs.
    Nov 14 12:11:29 unknown configd[14] <Notice>: network configuration changed.
    Nov 14 12:11:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:11:30 unknown CommCenter[17] <Notice>: No more assertions for PDP context 0.  Returning it back to normal.
    Nov 14 12:11:30 unknown CommCenter[17] <Notice>: Scheduling PDP tear down timer for (342983790.026476) (current time == 342983490.026488)
    Nov 14 12:11:30 unknown wifid[29] <Error>: WiFi:[342983490.109759]: Client dataaccessd set type to background application
    Nov 14 12:11:31 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|Could not find the current user principal. Found properties: [{
                  "DAV::displayname" = "[<CoreDAVLeafItem: 0xdea1ae0>]: DAV:displayname";
                  "DAV::principal-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xf1b79b0>]: DAV:principal-URL]
      HREF: [[[<CoreDAVHrefItem: 0xdeb4b30>]: DAV:href]
      Payload as original URL: [/calendar/dav/[email protected]/user/]
      Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]
      Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
                  "urn:ietf:params:xml:ns:caldav:calendar-home-set" = "[[<CoreDAVItemWithHrefChildren: 0xf1b6f30>]: urn:ietf:params:xml:ns:caldavcalendar-home-set]
      Number of HREFs: [1]
      Unauthenticated: [(null)]";
                  "urn:ietf:params:xml:ns:caldav:calendar-user-address-set" = "[[<CoreDAVItemWithHrefChildren: 0xde8f6f0>]: urn:ietf:params:xml:ns:caldavcalendar-user-address-set]
      Number of HREFs: [2]
      Unauthenticated: [(null)]";
                  "urn:ietf:params:xml:ns:caldav:schedule-inbox-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xde755f0>]: urn:ietf:params:xml:ns:caldavschedule-inbox-URL]
      HREF: [[[<CoreDAVHrefItem: 0xdeb4de0>]: DAV:href]
      Payload as original URL: [/calendar/dav/anyoneemail.com/inbox/]
      Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/inbox///[email protected]/calendar/dav/anyoneemail.com/inbox/]
      Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
                  "urn:ietf:params:xml:ns:caldav:schedule-outbox-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xdeac3a0>]: urn:ietf:params:xml:ns:caldavschedule-outbox-URL]
      HREF: [[[<CoreDAVHrefItem: 0xdeb7450>]: DAV:href]
      Payload as original URL: [/calendar/dav/anyoneemail.com/outbox/]
      Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/outbox///[email protected]/calendar/dav/anyoneemail.com/outbox/]
      Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
    Nov 14 12:11:32 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|There were some failures changing properties, according to the following response: [[[<CoreDAVResponseItem: 0xf2dfd20>]: DAV:response | Number of HREFs: [1]| Status: [(null)]| Number of prop stats: [1]| Error: [(null)]| Response description: [(null)]| Location: [(null)]]].
    Nov 14 12:11:34 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:19 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:11:38 unknown timed[2619] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:11:39 from GPS because time is unchanged
    Nov 14 12:11:42 unknown wifid[29] <Error>: WiFi:[342983502.660924]: Client itunesstored is background application
    Nov 14 12:12:29 unknown wifid[29] <Error>: WiFi:[342983549.925022]: Disable WoW requested by "apsd"
    Nov 14 12:12:29 unknown wifid[29] <Error>: WiFi:[342983549.927995]: Disable WoW requested by "dataaccessd"
    Nov 14 12:12:37 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
    Nov 14 12:12:37 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->255
    Nov 14 12:13:38 unknown profiled[2629] <Notice>: (Note ) profiled: Service starting...
    Nov 14 12:13:38 unknown profiled[2629] <Notice>: (Note ) profiled: Locking device
    Nov 14 12:13:39 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
    Nov 14 12:13:43 unknown CommCenter[17] <Notice>: Telling CSI to go low power.
    Nov 14 12:13:44 unknown lockdownd[22] <Error>: 016b9000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:timer fired
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(0)
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:Removing timer
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  0 (ID=103)
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  1 (ID=104)
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -42, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2667, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
    Nov 14 12:13:48 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:13:48 unknown kernel[0] <Debug>:
    Nov 14 12:14:20 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
    Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    Nov 14 12:14:20 unknown kernel[0] <Debug>: pmu wake events: menu
    Nov 14 12:14:20 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc199f000]::UIMInitialize - HSIC ports enabled
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
    Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
    Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
    Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
    Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983659.00 -300 NO DST in 310
    Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
    Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
    Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
    Nov 14 12:14:21 unknown kernel[0] <Debug>: set_crc_notification_state 0
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS:  @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -40, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2668, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
    Nov 14 12:14:21 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
    Nov 14 12:14:21 unknown lockdownd[22] <Error>: 016b9000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:14:22 unknown profiled[2629] <Notice>: (Note ) profiled: Device unlock notification received
    Nov 14 12:14:23 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
    Nov 14 12:14:23 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
    Nov 14 12:14:23 unknown timed[2631] <Notice>: (Note ) CoreTime: Want active time in 34.39hrs. Need active time in 117.73hrs.
    Nov 14 12:14:33 unknown Preferences[1862] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from  to (null)
    Nov 14 12:14:33 unknown timed[2631] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:14:34 from GPS because time is unchanged
    Nov 14 12:14:34 unknown Preferences[1862] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x13d7b0:<VPNBundleController: 0x13d7b0>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
    Nov 14 12:14:34 unknown com.apple.misd[2635] <Notice>: allowing special port forwarding for test fixtures
    Nov 14 12:14:41 unknown Preferences[1862] <Warning>: BTM: attaching to BTServer
    Nov 14 12:14:41 unknown Preferences[1862] <Warning>: BTM: posting notification BluetoothAvailabilityChangedNotification
    Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
    Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
    Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
    Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
    Nov 14 12:15:01 unknown CommCenter[17] <Notice>: removing received message 2147483663
    Nov 14 12:15:22 unknown profiled[2629] <Notice>: (Note ) profiled: Idled.
    Nov 14 12:15:22 unknown profiled[2629] <Notice>: (Note ) profiled: Service stopping.
    Nov 14 12:15:38 unknown kernel[0] <Debug>: launchd[2643] Builtin profile: container2 (sandbox)
    Nov 14 12:15:38 unknown kernel[0] <Debug>: launchd[2643] Container: /private/var/mobile/Applications/E45DB0BB-3802-413A-B858-D5EE2F5C8DFF [69] (sandbox)
    Nov 14 12:15:38 unknown wifid[29] <Error>: WiFi:[342983738.764213]: Client itunesstored is background application
    Nov 14 12:15:41 unknown UIKitApplication:com.apple.iBooks[0xdd89][2643] <Notice>: DictinaryServices: Dictionary cache was updated
    Nov 14 12:19:40 unknown kernel[0] <Debug>: 096088.069853 hsic-baseband::portActionGated: start device 0x00020001 (bus 1 port 2) completed with 0xe00002ed, retrying in 50ms
    Nov 14 12:20:50 unknown wifid[29] <Error>: WiFi:[342984050.417001]: Client dataaccessd set type to background application
    Nov 14 12:21:11 unknown lockdownd[22] <Error>: 00386000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:21:11 unknown com.apple.mobile.lockdown[22] <Notice>: Could not shutdown SSL connection: -9806
    Nov 14 12:21:53 unknown wifid[29] <Error>: WiFi:[342984113.211059]: Client itunesstored is background application
    Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."} 0xde94790
    Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|Error refreshing properties for account: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
    Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Warn |CalDAV refresh task failed wih error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
    Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Warn |==== CalDAV refresh FAILED for "email" (8B3B7412-5AB7-4636-85FC-0613452101C4): Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}.
    Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|CoreDAVPropFindTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
    Nov 14 12:23:24 unknown kernel[0] <Debug>: launchd[2659] Builtin profile: PasteBoard (sandbox)
    Nov 14 12:23:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->1
    Nov 14 12:23:25 unknown MobileSMS[117] <Error>: clip: empty path.
    Nov 14 12:23:25 unknown UIKitApplication:com.apple.MobileSMS[0x1a48][117] <Notice>: Nov 14 12:23:25 users-iPhone MobileSMS[117] <Error>: clip: empty path.
    Nov 14 12:23:26 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xd6ebe90 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xd6c7a50 "The request timed out."} 0x112d18d0
    Nov 14 12:23:26 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xd6ebe90 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xd6c7a50 "The request timed out."}
    Nov 14 12:23:29 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 1->3
    Nov 14 12:23:29 unknown MobileSMS[117] <Warning>: Trying to remove already removed image
    Nov 14 12:23:33 unknown MobileSMS[117] <Error>: CGAffineTransformInvert: singular matrix.
    Nov 14 12:23:33 unknown UIKitApplication:com.apple.MobileSMS[0x1a48][117] <Notice>: Nov 14 12:23:33 users-iPhone MobileSMS[117] <Error>: CGAffineTransformInvert: singular matrix.
    Nov 14 12:23:40 unknown imagent[49] <Warning>: [Warning] Async loading of bag failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xeeb64c0 {NSErrorFailingURLStringKey=http://init-p01md.apple.com/bag, NSErrorFailingURLKey=http://init-p01md.apple.com/bag, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xee9e340 "The request timed out."}
    Nov 14 12:23:40 unknown imagent[49] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init-p01md.apple.com/bag
    Nov 14 12:23:45 unknown SpringBoard[15] <Notice>: Connection to the change hub got interrupted.
    Nov 14 12:23:49 unknown wifid[29] <Error>: WiFi:[342984229.632067]: Client itunesstored is background application
    Nov 14 12:24:28 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:36 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:47 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x113bdf50 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113b5750 "The request timed out."} 0x1127a260
    Nov 14 12:24:47 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x113bdf50 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113b5750 "The request timed out."}
    Nov 14 12:26:07 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x2c7230 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x2a0b10 "The request timed out."} 0x11257260
    Nov 14 12:26:07 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x2c7230 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x2a0b10 "The request timed out."}
    Nov 14 12:26:31 unknown imagent[49] <Warning>: [Warning] Async loading of bag failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x19b500 {NSErrorFailingURLStringKey=http://init-p01md.apple.com/bag, NSErrorFailingURLKey=http://init-p01md.apple.com/bag, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x18d740 "The request timed out."}
    Nov 14 12:26:31 unknown imagent[49] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init-p01md.apple.com/bag
    Nov 14 12:31:45 unknown kernel[0] <Debug>: launchd[2681] Builtin profile: container (sandbox)
    Nov 14 12:31:45 unknown kernel[0] <Debug>: launchd[2681] Container: /private/var/mobile/Applications/DD219E23-801C-44FF-A939-FC1E23D7B5CD [69] (sandbox)
    Nov 14 12:31:48 unknown Ping[2681] <Warning>: WARNING: Using legacy cell layout due to delegate implementation of tableView:accessoryTypeForRowWithIndexPath: in <myping: 0x161090>.  Please remove your implementation of this method and set the cell properties accessoryType and/or editingAccessoryType to move to the new cell layout behavior.  This method will no longer be called in a future release.
    Nov 14 12:31:49 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x11344bc0 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113fb400 "The request timed out."} 0x2f3eb0
    Nov 14 12:31:49 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x11344bc0 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113fb400 "The request timed out."}
    Nov 14 12:32:48 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
    Nov 14 12:32:48 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->255
    Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
    Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
    Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
    Nov 14 12:33:02 unknown kernel[0] <Debug>: set_crc_notification_state 0
    Nov 14 12:33:11 unknown com.apple.misd[2685] <Notice>: allowing special port forwarding for test fixtures
    Nov 14 12:33:13 unknown profiled[2686] <Notice>: (Note ) profiled: Service starting...
    Nov 14 12:33:13 unknown Preferences[1862] <Warning>: loadAPTableCellImages: loading images
    Nov 14 12:33:15 unknown Preferences[1862] <Warning>: -[APSettingsController specifiers]: CMSFLWLAN: _canForget(1), _canSetAutoJoin(0), _canSetAutoLogin(0)
    Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 1
    Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType USBHost
    Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
    Nov 14 12:33:23 unknown kernel[0] <Debug>: launchd[2688] Builtin profile: ptpd (sandbox)
    Nov 14 12:33:23 unknown lockdownd[22] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0xfe164d0 [0x3fced630]>{type = mutable dict, count = 5,
              entries =>
                        1 : <CFString 0xfe2dc20 [0x3fced630]>{contents = "kCTMobileEquipmentInfoCurrentSubscriberId"} = <CFString 0xfe16770 [0x3fced630]>{contents = "310410438874235"}
                        2 : <CFString 0xfe1cd20 [0x3fced630]>{contents = "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0xfe2cd90 [0x3fced630]>{contents = "012937000519404"}
                        4 : <CFString 0xfe2e1b0 [0x3fced630]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0xfe2e1e0 [0x3fced630]>{contents = "89014103254388742359"}
                        11 : <CFString 0xfe2d750 [0x3fced630]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0xfe2cd90 [0x3fced630]>{contents = "012937000519404"}
                        12 : <CFString 0xfe2e280 [0x3fced630]>{contents = "kCTMobileEquipmentInfoIMSI"} = <CFString 0xfe16770 [0x3fced630]>{contents = "310410438874235"}
    Nov 14 12:33:23 unknown lockdownd[22] <Error>: 00386000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
    Nov 14 12:33:24 unknown atc[2690] <Warning>: Error: Connection invalid
    Nov 14 12:33:28 unknown ptpd[2688] <Notice>: PTP interface has been activated at high speed.
    Nov 14 12:33:37 unknown lockdownd[22] <Error>: 0173b000 special_case_get_domain: NN: checking BT MAC Address reported back f0:cb:a1:06:a3:0d
    Nov 14 12:33:38 users-iPhone mc_mobile_tunnel[2700] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    Nov 14 12:33:38 users-iPhone mc_mobile_tunnel[2700] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.

    *228 option 2 might work. All phones can be different.

  • Strange import issue .. no longer works in 2.6 or Beta 3

    Strange import issue.
    I use LR-2.6 everyday but have only played around with the LR-3 for a limited amount of time so the other day I decided check it out and tried to import a handful of RAW(canon) files on a SDxc-8g card via a USB card reader. I set it up to copy and convert to DNG, apply a few keywords and Metadata but when I tried it acted like it imported the first image and then froze. Card reader lights stopped blinking and just stayed on, program task bar doesn’t show any progress, not even for the first image. I then went to the folder that I was going to have the images copies to and it contained a file of the first image, but there is no indication that LR-3 even created it and it doesn’t show up in the catalog. When I tried to close out LR-3 is popped up the “in the middle of a task warning” so I just closed the program and tried it a couple more times to no avail.
    So I though o well I will just open up LR-2.6 and import them from there, guess what now LR-2.6 does the exact same thing!!
    I thought maybe my card reader was a POS but I was able to drag all the files to a new folder on my desktop and import them from there, nope. Tried rebooting a couple times, even opened a new catalog to test with, in both LR-2.6 and LR-3 and neither will work..
    I am stumped any ideas?

    Thank you for everyone's assistance
    I actually figured out what the problem was, like most issues it comes back to operator error, it seem I had inadvertently chose a "rename file on import" template that I had set up to name the files based on a custom fill-in field in the Meta Data, I normally only used that template when I was exporting images that had been completely edited, so being these images were new imports that field was blank, hence it would import the first image and then do to " don't import subjected duplicates" being checked it would just stop the import process.

Maybe you are looking for