Strange outline on overlaid images after render, but not before.
Hey everyone! Thanks in advance!
I am editing a music video, and I had to mask the brand name of the keyboard for copyright reasons. Basically I made a rectangle that matched the texture of the keyboard and overlaid it, keeping it aligned using motion keyframes.
After completing the keyframes, I thumbed through each frame, and everything looked great, but I needed to render it. After rendering, it had this strange halo/border thing around it making it very obvious that I had tried to cover something up.
The image is a .tiff with transparency. The video is DVCPro HD 1080 30P (Shot interlaced, 3:2 dropdown, de-interlaced) I have Final Cut version 7.0.3. The sequence is set to render in high-precision YUV.
Here are some links to pre-render and post-render images. You can see part of the keyboard just sticking in from the right.
http://www.gabrielredding.com/prerender.jpg
http://www.gabrielredding.com/postrender.jpg
Thanks a bunch guys!
garbage matte a portion of the keyboard without the logo, move it into the right position and place it on top of the video, soften the edges with matte magic
Similar Messages
-
Strange horizontal lines in images after render
Hard to explain but after I rendered, many of my photos which have motion have horizontal lines in them like those hologram toys from the old crackerjacks boxes. The images moves like commanded but there are lines in it.
Yes when I play it or burn to DVD they are still there but not when I am watching it on the timeline. If I render all then sometimes this happens. I've rendered, seen the change, clicked undue and they look good again. Strange. It's not on all of them but some are really really bad. Wish I could show you. I'll think on that and maybe post it to utube or something.
-
Pixelated video after build (but not before)
Hey guys, I'm having an issue with DVDSP 4.2.2. I've made 4:3 mpeg 2's using compressor. Both files have the same original compression, output size, field order. Both mpeg 2's looks fine when played in QT player. The DVD Simulates fine in DVD studio pro.
Now...once I create a build and view it in DVD player, all goes bad. it's pixelated, and looks scaled. The image is the exact same size as the simulator in DVDSP, and the mpeg 2 in QT player. My settings in dvdSP are 4:3 SD, track 720x480i.
What the **** am I doing wrong?
Oh, the DVD also plays pixelated on a TV...thanks for any insight...Thats some pretty bad advice for many who might be have the same issue. If your source is interlaced, you should encode interlaced. DVD players dont de-interlace. They either have progressive or interlaced outputs
-
Adding an image when signing, but not in the signature field, in Reader
Hi,
I would like to know if it is possible to add an image to a pdf document when I sign the document in Reader.
I do not want to add the image in the signature field as a signature, but rather below the signature field. The image is 'n barcode providing me with more information on the signature.
I have looked at the Stamper example, but this functionality is not avialable in Reader.
Thank you,
MagdaIf you insert after signing you will break the signature!! You need to do any such stamping BEFORE signing.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 26 Oct 2011 23:54:15 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Adding an image when signing, but not in the signature field, in Reader
Re: Adding an image when signing, but not in the signature field, in Reader
created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3992619#3992619 -
iPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution?
Unless you have the source files that were on the TC or Windows machine you will have to start over with a new library as follows:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects. Your original library will remain intact for further attempts at fixes is so desired.
OT -
Printer just started feeding a blank page after some, but not all printed documents
Printer just started feeding a blank page after some, but not all printed documents
Hi @cam21 ,
I understand that you are having issues printing, after some documents you are getting blank pages. I would be happy to help you.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
What application are you printing from?
It may be a setting in the application.
Does this happen from all applications?
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
How is the printer connected? (USB/Ethernet/Wireless)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Why can you flip an image in Photoshop, but not Cmera RAW, or can you? (CS5)
Doesn't look like you can. I'm just a user, so I don't know why. It can be done in Lightroom if that's any consolation.
-
I have develop a custom solution for SharePoint Foundation 2010 that provide PDF documents filled with lists data and attachemnts.
If the Customer run the solution to get the PDF we found in the ULS log following entry:
03/07/2014 12:07:20.69 w3wp.exe (0x0B10) 0x18EC
SharePoint Foundation General 90hv Unexpected
Detected use of SPRequest for previously closed SPWeb object. Please close SPWeb objects when you are done with all objects obtained from them, but not before. Stack trace: at Microsoft.SharePoint.Utilities.SPUtility.GetLocalizedString(String
source, String defaultResourceFile, UInt32 language) at Microsoft.SharePoint.SPFieldCollection.get_DisplayNameDict() at Microsoft.SharePoint.SPFieldCollection.GetFieldByDisplayName(String strDisplayName, Boolean
bThrowException) at Microsoft.SharePoint.SPFieldCollection.GetField(String strName, Boolean bThrowException) at Microsoft.SharePoint.SPListItem.GetValue(String strName, Boolean bThrowException)
at Microsoft.SharePoint.SPListItem.get_Item(String fieldName)
at ECM_PDF_Excel.ListClicked.GetECOs(Dictionary`2 searchedEC... e918ecd4-7ed6-44bb-9e4f-d764586a2f79 ...RECONumber)
at ECM_PDF_Excel.PDF.Create() at ECM_PDF_Excel.Layouts.ECM_PDF_Excel.ECMPDFExcel.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext
context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr
managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 f... e918ecd4-7ed6-44bb-9e4f-d764586a2f79
03/07/2014 12:07:20.69* w3wp.exe (0x0B10) 0x18EC SharePoint Foundation
General 90hv Unexpected ...lags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32
flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) e918ecd4-7ed6-44bb-9e4f-d764586a2f79
We check the method
/// <summary>
/// Returns the ECOs in a Dictionary: ECO Number, Suffix
/// </summary>
/// <param name="searchedECRECONumber">Dictionary, with the search ECR/ECO Number</param>
/// <returns>Dictionary ECO Number, Suffix</returns>
public static Dictionary<string, string> GetECOs(Dictionary<String, String> searchedECRECONumber)
SPSite siteContx = SPContext.Current.Site;
SPWeb webContx = siteContx.RootWeb;
Dictionary<string, string> listECOs = new Dictionary<string, string>();
string ecoNumber = string.Empty;
string ecoSuffix = string.Empty;
if (searchedECRECONumber.ContainsKey(ConstantData.listClickedECONumberDictionary))
ecoNumber = searchedECRECONumber[ConstantData.listClickedECONumberDictionary];
else
return listECOs;
// Ich suche die ECO Nummber bei gegebener ECR Nummer
// Ich brauche den Listen Namen der in den Spalten Realtion ECR Number & Realtion ECO Number einen Wert hat
SPList dataList = webContx.Lists.TryGetList(ConstantData.listName_ECMExcelTemplateDataLists);
if (dataList != null)
SPListItemCollection dataListItems = webContx.Lists.TryGetList(ConstantData.listName_ECMExcelTemplateDataLists).Items;
foreach (SPItem dataListItem in dataListItems)
Object relationECRColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECRNumber];
Object relationECOColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECONumber];
if (relationECRColumnName != null && relationECOColumnName != null)
// Ich habe den Listennamen gefunden in dem Spalten Realtion ECR Number & Realtion ECO Number einen Wert haben
string searchedListName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_Title];
string searchedECOSuffixColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECONumber];
// Get the List from variable listName
listECOs = GetECOsDictionary(searchedListName, searchedECOSuffixColumnName, ecoNumber, relationECOColumnName);
return listECOs;
- What take we wrong?
- How can we avoid this message?
Regards
Jonnyenglisch
Ralf Happe - Christobal Colón N° 1 ES 07670 Portocolom Tel.: +34 6961 0375 7 @: [email protected] Skype: ralfhappe msm: [email protected] www.ralfhappe.com ralfhappe | soluciónesHere the code of GetECOsDictionary:
/// <summary>
/// Fill the dicionary with related ECO Numbers/Suffix
/// </summary>
/// <param name="searchedListName">String: the name of the list</param>
/// <param name="ecoNumber">String: the ECO Number</param>
/// <param name="relationECOColumnName"></param>
/// <returns>Dictionary</returns>
private static Dictionary<string, string> GetECOsDictionary(string searchedListName, string ecoNumber, Object relationECOColumnName)
SPSite siteContx = SPContext.Current.Site;
SPWeb webContx = siteContx.RootWeb;
Dictionary<string, string> listECOs = new Dictionary<string, string>();
SPQuery oQuery = new SPQuery();
oQuery.Query = "<OrderBy>" +
"<FieldRef Name='" + "Title" + "' Ascending='TRUE'></FieldRef>"
+
"</OrderBy>" +
"<Where><BeginsWith>" +
"<FieldRef Name='" + "Title" + "'/>" +
"<Value Type='Text'>" + ecoNumber + "</Value>" +
"</BeginsWith></Where>";
SPListItemCollection searchedListItems = webContx.Lists.TryGetList(searchedListName).GetItems(oQuery);
foreach (SPItem searchedListItem in searchedListItems)
// Wenn die geclickte ECO Nummer gleich der Listen ECO Nummer ist dann setze die gefundene ECO Nummer
string foundECONumber = (String)searchedListItem[relationECOColumnName.ToString()];
string[] splitECONumber = foundECONumber.Split(ConstantData.splitBy_Slash);
if (ecoNumber == splitECONumber[0])
ecoNumber = splitECONumber[0];
if (splitECONumber.Count() == 1)
listECOs.Add(foundECONumber, "0");
if (splitECONumber.Count() > 1)
listECOs.Add(foundECONumber, splitECONumber[1]);
return listECOs;
Ralf Happe - Christobal Colón N° 1 ES 07670 Portocolom Tel.: +34 6961 0375 7 @: [email protected] Skype: ralfhappe msm: [email protected] www.ralfhappe.com ralfhappe | soluciónes -
Calculations that work in After Effects but not in Premiere Pro
I'm developing another Premiere Pro plugin based on AE effects SDK.
The plugin manipulates pixels in a very simple way - based on lift/gamma/gain controls it changes the values as such:
colorRGB->blue = PF_POW( colorRGB->blue , gamma) * gain + lift
And so on for the red, and green. All in floating point, PF_FpShort. I even tried doing calculations in PF_FpLong, but the results were the same.
Later the values can be clipped using MAX and MIN macros.
In After Effects everything works perfectly. In Premiere Pro, once certain gamma treshold (less than about 0.5, more than about 1.4) is reached, I start getting weird artifacts. Either green pixels or black squares in random patterns, usually, but not always, corresponding to the darker parts of the image.
I have no idea why, and how to correct it.
Please help.
EDIT: Actually any gamma that is different than 1 results in these weird artifacts, and only in the BGRA_32f mode. BGRA_8u works fine.I have applied the procamp, and I am even more convinced that this must be some kind of a bug with the blue channel.
All other channels handled negative and positive values out of [0,1] range perfectly - reducing brightness in the procamp, and bringing it back in my filter works fine. Of course, all the data in the blue channel is already lost by clamping it on the input.
Which is the reason I would not want to clamp the blue channel on input, and proceed with the calculations. But so far I have not figured out how to do it.
EDIT: Stranger and stranger...
If I clamp the assignment to the proxy pixel, it works fine:
colorRGB->blue = MAX (0, inP->blue);
But if I clamp just the value in the PF_POW macro like this:
colorRGB->blue = PF_POW (MAX (0,inP->blue), gamma.blue ) ;
or like tis
colorRGB->blue = PF_POW (MAX (0,colorRGB->blue), gamma.blue ) ;
It doesn't. It also doesn't work with pow() function from math.h, and it also doesn't work if I clamp the PF_POW from the outside like this:
colorRGB->blue = MAX( 0 , PF_POW (colorRGB->blue, gamma.blue ) ); -
I am having trouble resizing images after I installed the FCP update. When I press the transform button, and then click on teh image, I go to the little blue dots on the side of the image that usually resize the image, and when I drag them out, instead of the image resizing, a black trasparent rectangle the same size as the photo expands outward to my desired size. This has happened to me before the update when trying to resize text, but the problem usually fixed itself once I clicked again on the text line in the editing section.
Any ideas?Hi Russ,
It doesn't work that way either, however it's okay because I solved the problem. Turns out I had to select 'add keyframe' on either the 'crop' or 'distort' tabs and it fixes itself. No idea why but the problem is solved! Thanks for your help anyhow. -
Mutating table exception on trigger with After Insert but not with before
Hi
I need to maintain some constraint on the table to have only one row for values of the columns but not by primary key constraint.
Because in case of primary key the insert would fail and the rest of the operation would be discontinued, I cannot change in the somponent that inserts the row so I have to prevent that on the table I have.
I created a before insert trigger on the table which checks if any row exists in the table with same column values as the one being inserted. if found I delete the rows and let the insert happen (w/o raising any error). if the rows do not exist then the insert shall be continued.
I read at place that modifying the dame table in the trigger body shall raise a mutating table exception, but I donot get the exception when the trigger is fired.
Just when I change the trigger to after insert trigger then the nutating table exception is thrown.
Is it the right behavior i.e. the Before insert trigger does not raise the exception and only after insert does that, since I could not find the example for before insert triggers throwing such exception so I think it is better to confirm it before finalizing the implementation.
Thanks
Sapansapan wrote:
Hi Tubby
I cannot user unique constraint because that would raise an exception upon violation and the third party component that is inserting in the table would fail.
That component does some other tasks as well after this insert and if an exception is raised then those tasks would not be performed.
Also I cannot change the component to ignore this exception.Well then, you're in a bit of a pickle.
I'm guessing the trigger you have been working on isn't "safe". By that i mean that it doesn't account for multi-user scenarios. You'll need to serialize access to the data elements in question and implement some sort of locking mechanism to ensure that only 1 session can work with those values.
After you work out how to do that it sounds as though you would be better served using an INSTEAD OF trigger (you'd need to implement this on a view which is made off of your base table).
Here's one way you can work on serializing access to your table on a relatively fine grained level (as opposed to locking the entire table).
Re: possible to lock stored procedure so only one session may run it at a time?
Cheers, -
Solaris x86 on a mac, blank screen after miniroot but NOT when console=ttya
I am trying to install Solaris 10 x86 update7 on a Mac Mini.
It hangs with a blank screen right after loading the miniroot, before the "Configuring devices..." part.
I can't even see the miniroot loading completion (the hex addresses displayed when miniroot is loaded)... it
clears the screen and just hangs there.
But...
By trials and errors I discovered that if I use the ttya or ttyb console setting when booting, it does NOT hang!
It proceeds further, and prompts for type of installation and then for language. Unfortunately, since Mac Mini does not
have any serial port, I can't proceed with the installation since if I use console=ttya I can't use the keyboard anymore.
I ran the sun tool to check for hardware compliancy and it passed.
I think there must be something odd with the graphic card probe, what else could change when I boot with "console=ttya"
beside that? Is there a way to bypass the check for the graphic card when booting? I don't want to use it, either... I would
use the mac mini as a server, I wish I could remove the graphic card but it's embedded in the motherboard :-)
I do not have boot camp installed on this Mac. Could that make any difference?
I also tried to fire up opensolaris and that one works without problems, but I want Solaris 10 not opensolaris...
Any hint is greatly appreciated!!
Thanks in advance...
RickHi Rick,
Like you, I have been trying to install Solaris10u7 on my 13" white Macbook. I got the same errors. Solaris10u6 used to work on this same machine, except for the lack of audio driver support.
I tried to connect a USB keyboard, but the same problem persist. Adding "console=text" or "console=keyboard" to the GRUB startup parameters did not help. But it does look like a console detection problem. Hopefully, there is a workaround. I'll check this forum post again to see if anyone comes up with a workable solution. I also prefer to have Solaris proper, not Opensolaris.
_After-thought_: Perhaps I'll just follow the developments on SXCE until 'Solaris 11' is released next year (hopefully sooner than expected). Older versions of SXCE did work well on the Macbook, though not the recent ones.
Alvin -
Image loads locally but not on Website?
I have constructed a slide show viewer for use on a website.
The swf loads jpeg images which are contained in the same
directory. This works well on my local machine but when uploaded to
a website and called up by an html file, the swf runs and shows the
correct backgrounds but fails to load any jpegs. I assume that the
problem is to do with the transfer of the variable 'Select_picture"
into the loadMovie statement?
The following loop (step variable = pic_no) works locally but
not on website:-
>>var Select_picture:String="Pic"+pic_no+".jpg";
>>var Select_mc:String="mc"+pic_no;
>>
>>this.createEmptyMovieClip([Select_mc], depthnow++);
>>loadMovie([Select_picture], [Select_mc]);
In order to prove that a picture could be loaded on the
website, I simplied the code to :
>>loadMovie("pic1.jpg",[Select_mc]);
and this worked.
So, I tried to transfer the same string directly via the
variable;-
>>var Select_picture:String="Pic1.jpg";
>>
>>loadMovie([Select_picture], [Select_mc]);
But this does not work.
Any suggestions would be greatly appreciated.
Regards
DaveThanks , Arunkkumar2207j and ggshow for your suggestions.
1, The image size isn't a problem because the one I used for
the test is only 200k. And the single test image loads very quickly
on the website.
2. I don't think the depth of the movie clip is a problem
either because depthnow starts at a very large number and is
incremented for each clip and works well for multiple clips on my
local machine. Also when loading a single image is should not be a
problem. Also, I think I proved that was working with the single
image test?
3. The htm, swf and images are in the same directory. But for
the test, I ran the swf directly on the website (without using the
htm file to load it)
Please keep the suggestions coming....!
Many thanks
Dave -
Some apps losing data shortly after restore (but not immediately)?
I recently got my iPad replaced after a hardware failure. I restored the new iPad, which forced an upgrade to iOS 5.0.1. After restoring apps, I restored app settings from a backup. When opening apps, it seemed that the restore had restored game progress etc. However, some (but not all) apps are then losing data: After switching to another app, or closing the app, and then opening the app again, the app has been reset to its starting state, with all game progress lost.
Can anyone suggest what to do?Turns out that the restore had created two accounts at the app developer's game server. After removing the new account, it has worked nicely since.
-
Jumpy Still Images After Render
(I know, another slide show tread...)
I'm making a slide show with zoom and pan key framing (like I used to do with FCE 2.0.3 which worked FINE) with my spiffy new FCE 4.0. The sequence looks fine when I play it from the timeline. If I play the key-framed image in the viewer (pre-render) it appears jumpy. Once I render the sequence, the playback is jumpy. Exported quicktime movies are also jumpy.
I've imported original quality images (3008x2000) in both JPEG and TIFF. I've also imported 1440*957 JPEG (twice the 720x480 canvas as recommended by the FCE help.) I get the same results.
I've read some other posts on similar issues, but they don't seem to be quite like this one.
Thanks Forum.
DaveI read about the de-interlace stuff, and I must confess ignorance, I just don't understand all the surrounding issues with interlacing
when FCE renders the stills, does it interlace it at that time? I'm guessing I can't prevent that from happening?
Let me summarize a few points I understand of interlacing:
- interlacing is the native method for DV either PAL or NTSC (and not only), so whether you are aware or not it is there: it's good because it smoothes motion (50 or 60 images per second in place of 25 or 29,97) but it's bad because it halves the vertical resolution, unless you shoot almost steady videos.
- on the computer you usually do not see interlacing because the playback application (QT or FC or others) blend/drop fields on the fly
- the comb effect you sometimes see on computer results from playing at exactly the same instant 2 different fields shot 1/50 th or 1/60 th of second apart
- on Mac you can see comb effect in QuickTime Pro by setting the High Quality option and in the canvas of FCE and FCP by selecting 100% zoom
- on external interlaced devices (e.g. TV either connected through the firewire and D/A converter, or using DVD players) the comb effect is not visible, and interlacing is fully exploited for its original purpose: smoothing motion.
- +any still taken from a moving video in FCE is a full frame including both fields+ and then showing the comb effect, if there was any motion
So, to answer your questions:
- you should not de-interlace video that will be watched on TV: you'll lose quality on TV even if it might look better on computer
- you should always de-interlace still images taken from moving video (e.g. Make Freeze Frame in FC) to avoid seeing both fields, unless there is no motion
In any case as Ian says try and choose the best result on a case by case basis.
Piero
Maybe you are looking for
-
when ical is opened the day under the year 2007 remains the same Sat. AM. Is there any way to change this back so that it lists the correct day and time?
-
How do I fix these glitches? If fixable...?
Hello, I have the 4th gen iPod touch with the latest software, 5.0.1. It was running fine after the newest update, it was just a few weeks ago that it started acting up. Occasionally, the camera app will show a black screen... just a black screen. I
-
Iphoto missing images? i have tried the reparing datbase?
to be fair i dont know if the images are missing but there a few greyed out blank box images in my events section i have several folders and quite a few showing greyed out image... i am guessing the actual images were there at one point, but not avai
-
Dear gurus, I encountered a problem. We upload documents in pairs. One file of pair is scanned version of document (TIFF file) and second one is recognized version (MS Word file). We present a document as a pair of two files, tiff and ms word. It's n
-
Trouble Creating Web Service from WSDL in 9.2
I am following the guide at: http://edocs.bea.com/wls/docs92/webserv/setenv.html#wp214576 for creating a web service from wsdl using Ant. When i run the "wsdlc" task, it creates a Jar with source files but no class files. This seems odd. So, i have t