Strange Output From CS3 to Fiery printers

When we output from Indesign CS3 we get a couple of strange issues to our fiery and one new issue just started with our Harlequin RIP.
When printing a multi page document to the Fiery's (5 Different ones) sometimes page 1 will be oriented correctly and all of the other pages will be rotated on the sheet and cut off. Also when I go to make changes through command workstation to change duplex settings, image shift etc. It's a crapshoot if it will work on Indesign files. This has been happening with all iterations of Leopard.
When printing to the Harlequin using a preset envelope template the file is oriented wrong. It doesn't matter if we put the sizes in manually or how we set the orientation in the print window it's wrong. This has been happening for a few weeks.
Curretly we are on 10.5.5

Sorry I wasn't clear. The rips are the print servers. They are hooked to a variety of printers Xerox, Konica, Canon and Presstek. The problem is when I send the file and preview it at the RIP. The problems are also there when I output the files from the Rip to the printers.
The Fiery Problem is ocuring on several different Fiery RIPS each connected to it's own printer. We only have on Harlequin RIP and Device so I'm not sure how widespread it is. The problems do not exist if I send PDF's or other native files such as quark.

Similar Messages

  • Strange output from prtdiag

    I inserted the 2nd CPU into the E250 and turned on the system. Upon the banner shown, I did Stop-A and type in 'boot -r' at the ok> prompt. It continued and eventually gave me the login prompt. Once I logged in and did prtdiag, I get conflict information as to how many CPUs are running: the first line says there are two while the CPUs section shows only one. Did I do something wrong?
    Below the the output.
    Thanks!
    # ./prtdiag -v
    System Configuration: Sun Microsystems sun4u Sun (TM) Enterprise 250 (2 X Ultr
    aSPARC-II 296MHz)
    System clock frequency: 99 MHz
    Memory size: 1280 Megabytes
    ========================= CPUs =========================
    Run Ecache CPU CPU
    Brd CPU Module MHz MB Impl. Mask
    SYS 0 0 296 2.0 US-II 2.0

    What directory are you running prtdiag from?
    Also, there should be more to that after the CPU, did you truncate that output?
    Daryl

  • Strange output from permissions repair

    This not so much a problem but a question. When I did a routine permissions repair, I got the following message:
    Repairing permissions for “Startup HD”
    Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
    Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
    Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
    I have never seen a message that is headed, "Warning," and I don't know what it all means nor what to do about it if action is required.
    Anyone know what this all means?
    Thanks!

    Well, you are right. Using the link you provided, the warning lines went away. I wonder how you knew to use that update other than the other? It took just short of 10 hours to do that download - more actually, but I didn't count the number of times I had to restart the download due to losing carrier during the download.
    Apple is killing me with these enormous downloads. I live in a rural area, too far away from the road to use cable, so no broadband. The population density isn't there for Verizon or other carriers to make DSL available. I could use a satellite service but it is just way too expensive both with the monthly subscription price and with the investment in hardware needed. 109 megs to make this problem go away. Just not right. I think Apple forgets that many people do not have a high speed connections.
    Anyway, thanks again.

  • Strange output from format command

    Hi,
    We have a Sun V480 running Solaris 8. We have installed 2 SG-XPCI2FC-QF2 fibercards. They are connected to an EVA3000 system. SFS newest version are also installed.
    Have configured the cards with the cfgadm command. But when i run a format command i get this output. Normally it will show somthing like this c1t0d1. But here it shows c11t50001FE15005F54Dd1
    format
    Searching for disks...done
    AVAILABLE DISK SELECTIONS:
    0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
    /pci&#64;8,600000/SUNW,qlc&#64;4/fp&#64;0,0/ssd&#64;w21000004cf8ffa54,0
    1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
    /pci&#64;8,600000/SUNW,qlc&#64;4/fp&#64;0,0/ssd&#64;w21000004cf96abc8,0
    2. c11t50001FE15005F54Dd1 <HP-HSV200-5020 cyl 6398 alt 2 hd 128 sec 128>
    /pci&#64;8,700000/SUNW,qlc&#64;1/fp&#64;0,0/ssd&#64;w50001fe15005f54d,1
    3. c11t50001FE15005F549d1 <HP-HSV200-5020 cyl 6398 alt 2 hd 128 sec 128>
    /pci&#64;8,700000/SUNW,qlc&#64;1/fp&#64;0,0/ssd&#64;w50001fe15005f549,1
    4. c12t50001FE15005F54Cd1 <HP-HSV200-5020 cyl 6398 alt 2 hd 128 sec 128>
    /pci&#64;8,700000/SUNW,qlc&#64;2/fp&#64;0,0/ssd&#64;w50001fe15005f54c,1
    5. c12t50001FE15005F548d1 <HP-HSV200-5020 cyl 6398 alt 2 hd 128 sec 128>
    /pci&#64;8,700000/SUNW,qlc&#64;2/fp&#64;0,0/ssd&#64;w50001fe15005f548,1
    Specify disk (enter its number):
    Can anyone explain this? I was possible to format the disk. But are this OK?
    Thanks,

    Rather than having disk target numbers, format now see's the disks WWN or World Wide Number. If you look at your output, disk 0 and disk 1 have the standard c1t0d0 and c1t1d0 identifiers, but the targets on controller 11 and 12 show the WWN for the LUNs/disks on the EVA3000. This is to help with multipathing etc. Yes it is on to slice the LUNs/disks.

  • Strange output from lm_sensors with HP Compaq 6510b

    I'm having troubles understanding what my CPU temperature is when using lm_sensors on my HP Compaq 6510b.
    $ sensors
    acpitz-virtual-0
    Adapter: Virtual device
    temp1: +46.0°C (crit = +105.0°C)
    temp2: +30.7°C (crit = +108.0°C)
    temp3: +50.0°C (crit = +110.0°C)
    temp4: +50.0°C (crit = +256.0°C)
    temp5: +49.0°C (crit = +108.0°C)
    coretemp-isa-0000
    Adapter: ISA adapter
    Core 0: +51.0°C (high = +100.0°C, crit = +100.0°C)
    coretemp-isa-0001
    Adapter: ISA adapter
    Core 1: +51.0°C (high = +100.0°C, crit = +100.0°C)
    This is not the usual output that everyone else seems to get. I'm guessing Core 0 and Core 1 are the CPU temperatures? But why does the wiki say that I should expect some other format? And why don't I get that type of output?

    Rather than having disk target numbers, format now see's the disks WWN or World Wide Number. If you look at your output, disk 0 and disk 1 have the standard c1t0d0 and c1t1d0 identifiers, but the targets on controller 11 and 12 show the WWN for the LUNs/disks on the EVA3000. This is to help with multipathing etc. Yes it is on to slice the LUNs/disks.

  • Strange output from my java file

    Hi all,
    I made a post not long too long ago about some issues i was having. However since then i have not been able to come online or continue much with my work. I've just starting working on it again and after fixing the errors and implementing a little more code i had an unexpected output.
    Compiles fine, no errors Just a warning about not checking my vectors etc. But when i run the class file it does not display the grid like i thought it would.
    My code is below, but first is what i get when i run the class file after compiling.
    [[I@1fc4bec
    import java.util.Arrays.*;
    import java.util.Random.*;
    import java.lang.*;
    import java.util.*;
    public class SnakeGame
                //Fields
               final int
                         GRIDSIZEX        = 31,   //Stores the horizontal size of the grid
                         GRIDSIZEY       = 31,   //Stores the vertical size of the grid
                         SNAKESTARTX      = 15,   //Snakes horizontal start possition
                         SNAKESTARTY      = 15,   //Snakes Vertical start position
                         SNAKEBODYOFFSETX = -1,   //Does the body go left (neg) or right (pos) at start
                         SNAKEBODYOFFSETY = 0,   //Does the body go up (neg) or down (pos) at start
                         BLANK            = 0,   //Flag for blank space
                         WALL             = 1,   //Flag for wall
                         SNAKEHEAD        = 2,   //Flag for snakeshead
                         SNAKEBODY        = 3,   //Flag for snakesbody
                         FOOD             = 4,   //Flag for food
                         FRUIT            = 5,   //Flag for fruit
                         SNAKEATER        = 6;   //Flag for snakeater
                 int[][] boardGrid;  //the playing field
         public static void main(String[] args)
              SnakeGame snakeGame = new SnakeGame();
              snakeGame.initBoard();
              Vector Snake = new Vector();
              String h1 = new String("+");
              Snake.add(h1);
              String b1 = new String("~");
              Snake.add(b1);
              int x;
              int y;
         public void wall()
              char TOP_BOTTOM = '_';
              char LEFT_RIGHT = '|';
         public void food()
              char F = 'F';
              Object food = new Object();
         public static Object grid()
              Object Grid = new Object[31][31];
              Random x = new Random(31);
              Random y = new Random(31);
              return grid();
                   * This method sets up the playing field by placing the walls around the edge, snake at start,
                   * and the blanks.
                   private void initBoard()
                                  boardGrid = new int [GRIDSIZEX][GRIDSIZEY];
                              for(int row = 0; row < boardGrid.length; row++)
                                      for(int col = 0; col < boardGrid[0].length; col++)
                                                      //Insert a wall around edge
                                                      if (row == 0 || row == (boardGrid.length -1) || col == 0 || col == (boardGrid[0].length -1))
                                                             boardGrid[row][col] = WALL;
                                                 //Insert the snakes head
                                                 else if (row == SNAKESTARTX && col == SNAKESTARTY)
                                                         boardGrid[row][col] = SNAKEHEAD;
                                                 //Insert the snakes one body peice
                                                 else if (row == SNAKESTARTX + SNAKEBODYOFFSETX && col == SNAKESTARTY + SNAKEBODYOFFSETY)
                                                              boardGrid[row][col] = SNAKEBODY;
                                  else if (row == FOOD && col == FOOD)
                                       boardGrid[row][col] = FOOD;
                                                      //Make all the rest blanks
                                                 else
                                                    boardGrid[row][col] = BLANK;
                   System.out.println(boardGrid);
    }

    When you want to print an array then you can't just do
    System.out.println(someArray);This implicitly calls .toString() on the array which produces the result that you saw (= something that isn't very useful).
    You could write
    System.out.println(Arrays.deepToString(someArray));(after inporting java.util.Arrays).

  • Strange output from jrcmd print_memusage (R28)

    Hi guys,
    my jrcmd print_memusage tells me that my my heap is exactly the same size as my 'Compiled code' memory space:
    Total mapped 3709432KB (reserved=1053884KB)
    - Java heap 1048576KB (reserved=0KB)
    - GC tables 35084KB
    - Thread stacks 46848KB (#threads=162)
    - Compiled code 1048576KB (used=50879KB)
    - Internal 904KB
    - OS 64836KB
    - Other 641440KB
    - Classblocks 47616KB (malloced=47354KB #116850)
    - Java class data 772096KB (malloced=772015KB #557889 in 116850 classes)
    - Native memory tracking 3456KB (malloced=1451KB #10)
    This seems very weird to me, why would these 2 things be exactly the same?

    seems like a large amount of memory for compiled code but thanks for the response. Good to know the result is a sane one.

  • GUI locks up when trying to read output from server

    I have a client built in MVC fashion and have two GUI views. One view is for output from the server and input from the keyboard. The other view is for changing connection settings and starting the conection. The problem is when I make the call to connect from the connection GUI it is able to connect and set up the streams but both GUIs lock up once I start trying to output the text received from the server. The strange thing is that when I call these methods just from the Model and not via the GUI and its actionListener the whole thing works. I think it may have something to do with the loop locking up the GUI but don't how to resolve this.
    public void monitorServer()
    try
    char inputChar = (char)fromServer.read();
    while (socket.isConnected()==true && inputChar >-1 )
    inputChar = (char)fromServer.read();
    if ( ( (inputChar >= '0') && (inputChar <= 'z') )
    ||(inputChar == '\n')||(inputChar == '\r')
    ||(inputChar == ' ') )
    String tempString = (""+inputChar);
    mv.addText(tempString);
    catch(IOException ioException)
    JOptionPane.showMessageDialog(null,
    "Error: Failed to read message. Corrupt data sent by server",
    "Connection Error", JOptionPane.ERROR_MESSAGE);
    mv.addText("\nMessage not read.\n");
    The code above is the bot that screws it all up. mv is the other view that it is outputting the text to.
    Please help! I'm gonna fail my degree. :)

    you need to run your server connection part in another thread.

  • How do I update an CS3 ENCORE timeline from CS3 PP

    I have completed CS3 ENCORE project with menues and links and generate a test DVD.  Test DVD shows CS3 PPro edits are required.    2008 thread on same subject said to select ASSET 1 (timeline) from ENCORE Project panel, select file and REPLACE ASSET.  REPLACE ASSET is grayed out for me.   I imported the original video asset directly from PPro into ENCORE to start the ENCORE project.   ADOBE Dynamic Linking has AFTER-EFFECT (grayed out) as the only possible selections so I don't know if Dynamic Linking is effective or working.
    Goal is to update the video asset in PPro which is a ENCORE timeline without loosing the ENCORE markers from PPro.
    How should I output an updated sequence from CS3 PPRO and How should I REPLACE or pick up the updated asset in ENCORE?  How do I replace the ENCORE timeline with the new asset once I get it into ENCORE?
    Sorry that this is a repeat of a discussion 2 weeks ago.   I thought I could get away without PPro edit for a new DVD.  I was wrong.
    In ENCORE the video file is a .M2V MPEG and the separate audio file is WAVE  I have REPLACE ASSET capability on the MPEG file but what about the WAVE file.  Should both files be exported from PPro?   Do both files require REPLACE ASSET?

    You may be correct.  The BUILD DVD failed during write due to invalid mpeg file.   I thought by renaming SUMMERTIME2.m2v to SUMMERTIME.m2v I could fool .xmp file about that link.  There may be some time stamp or data size info in .xmp.  I really don't know what .xmp file contains or what it does.
    I don't know what .xmpses file does.
    Anyone know the prupose or function of .xmp and /xmpses files?
    Now I have two options.
    1. COPY/RENAME SUMMERTIME2.xmp to SUMMERTIME.xmp along with rename SUMMERTIME2.m2v and try to fool ENCORE again.  At this point I would have to remane the SUMMERTIME2.wave to SUMMERTIME.wave also as there must be the same problem with wave and m2v.  There is a 3rd ENCORE project asset call SUMMERTIME type=timeline which I don't know it's function or links,
    or
    2. Load SUMMERTIME2 m2v and wave as an assest to ENCORE and replace timeline for SUMMERTIME with SUMMERTIME2.  I would then HOPE the markers/links are not lost as the markers are the same between the 2 m2v files.
    Does anyone have CS3 ENCORE experience replacing timeline m2v assets with marks?
    Anyone have comment on my 2 approaches and the success of either?
    UPDATE:
    Well I answered my own question.  OPTION1 does not work.   BUILD DVD transcodes audio and began building dvd files, then declares "File not valid mpeg".
    This makes me think my output from PPro is not a valid MPEG file.  The m2v data size is very close to original m2v and audio file size is identical to original.  I am really stuck now. 
    OPTION 2 may not be any better if mpeg is not valid.   How do I validate or prove an m2v file is good for ENCORE outside of ENCORE?
    Message was edited by: Wes Cox

  • Video output from ATV is "blurry"

    Here's a strange one. I have an ATV connected to a Sony Bravia W series 1080p TV via component video .
    The output from my ATV is "blurry" on the screen, but otherwise functions fine.
    When I power off the ATV and back on (remove the power cord), the picture is fine, until it goes into sleep mode, then the next time it wakes up the picture is blurry again...
    I am at a loss what to do (it wasnt doing this via the HDMI connection to the TV - unfortunately though I have run out of HDMI connections to the TV).
    cheers
    steve

    Hi Winston, thanks for the reply.
    I'm currently running 720p resolution, but this issue occurs no matter what resolution I set the ATV to.
    I'm sure it's not a protected content issue because it does work fine on all my content at times...then at other times I experience the bluriiness on the same content.
    When the blurrines occurs, it's not just the content but all of the ATV menu's themselves have the same issue.
    cheers
    steve

  • No sound output from dock connector or headphones but speaker is fine

    I've got a 3GS which I've had since October.
    Recently, there has been no sound output from the headphone socket - or rather, what does come out is very strange, sounding almost electronically distorted.
    I thought that maybe the headphone jack was broken, but now I've found out that the same thing can be heard through a dock when the iPod is connected this way.
    I'm fairly sure the dock connector is still fine as the phone charges and can be controlled by the dock etc
    Most of the discussions I've found relate to sound not coming from the speaker on the phone, but this is absolutely fine.
    Any ideas?

    Hi, and welcome to Apple Discussions.
    Have you tried resetting the PMU?
    I'm not optimistic that this will help any more than the procedures you've already tried, but it won't hurt to try.
    Do you still have your OS 9 installation? If so, try booting into OS 9 and see if the problems with the audio are happening there, too. If so, you can bet it's a hardware problem.
    How big is your hard drive and how much space remains available on it? If you don't have your OS 9 installation in order to check out whether it's a hardware problem and you have enough available hard drive space, you may want to try an Archive and Install of the OS in order to make sure it isn't an OS X system-wide problem. If that doesn't do it, you could back up your hard drive and restore your software.
    All of this may just be spinning your wheels, but it's all stuff you can try before shelling out a lot of money for repairs.

  • Is there a way to move my keyboard shortcuts and preferences from CS3 to CS5?

    I just loaded CS5 and I'm starting to work with it. Big difference from CS3 and I'm finding things don't work the same at all. Anything i can do to make this seem more familiar, like using the same keyboard shortcuts and workspaces?

    Workspaces are stored as XML files in your user profile on Windows or the user library on Mac, in a subfolder called, strangely enough, workspaces.
    You may have run afoul of the new "content grabber" in the center of a frame that allows you to move the content without changing tools. Looks sort of like a dounut, or the center spot on some SLR camera focus viewfinders. You'll either love it or hate it, and it can be switched on or off in the View menu.

  • Stange output from Xorg 'startx'

    These don't feel like "real" error messages, there's no (EE) output on the /var/log/Xorg.0.log file... But this output from calling the startx command to start Xorg, is really strange, I never had something like this ever happening from the many times I've installed Xorg.
    I'm running Arch on VMware Workstation by the way...
    Any ideas how to fix some of these problems?
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.7.3.901 (1.7.4 RC 1)
    Release Date: 2009-12-11
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.32-ARCH i686
    Current Operating System: Linux NAZBOX-ARCH 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
    Kernel command line: root=/dev/disk/by-uuid/69545e21-8d63-4347-9712-5089d2cda505 ro vga=0x0340
    Build Date: 12 December 2009  12:59:40PM
    Current version of pixman: 0.16.4
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 22 04:27:29 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    >                   Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning:          Duplicate shape name ""
    >                   Using last definition
    > Warning:          Duplicate shape name ""
    >                   Using last definition
    > Warning:          Duplicate shape name ""
    >                   Using last definition
    > Warning:          Duplicate shape name ""
    >                   Using last definition
    > Warning:          Duplicate shape name ""
    >                   Using last definition
    > Warning:          Duplicate shape name ""
    >                   Using last definition
    > Warning:          Duplicate shape name ""
    >                   Using last definition
    > Warning:          Duplicate shape name ""
    >                   Using last definition
    > Warning:          Duplicate shape name ""
    >                   Using last definition
    > Warning:          Duplicate shape name ""
    >                   Using last definition
    > Warning:          Duplicate shape name ""
    >                   Using last definition
    > Warning:          Duplicate shape name ""
    >                   Using last definition
    > Warning:          Duplicate shape name ""
    >                   Using last definition
    > Warning:          Duplicate shape name ""
    >                   Using last definition
    > Warning:          Multiple doodads named ""
    >                   Using first definition
    > Warning:          Multiple doodads named ""
    >                   Using first definition
    > Warning:          Multiple doodads named ""
    >                   Using first definition
    > Warning:          Multiple doodads named ""
    >                   Using first definition
    > Warning:          Multiple doodads named ""
    >                   Using first definition
    > Warning:          Multiple doodads named ""
    >                   Using first definition
    Errors from xkbcomp are not fatal to the X server
    GNOME_KEYRING_SOCKET=/tmp/keyring-yXZCY0/socket
    SSH_AUTH_SOCK=/tmp/keyring-yXZCY0/socket.ssh
    GNOME_KEYRING_PID=4918
    (gnome-settings-daemon:4917): GLib-GObject-CRITICAL **: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
    (gnome-settings-daemon:4917): GLib-GObject-CRITICAL **: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
    Window manager warning: Failed to read saved session file /home/nazgulled/.config/metacity/sessions/10f0dd2ed0c3770f58126145605170952500000049050011.ms: Failed to open file '/home/nazgulled/.config/metacity/sessions/10f0dd2ed0c3770f58126145605170952500000049050011.ms': No such file or directory
    (polkit-gnome-authentication-agent-1:4946): GLib-GObject-WARNING **: cannot register existing type `_PolkitError'
    (polkit-gnome-authentication-agent-1:4946): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed
    ** Message: Initializing gksu extension...
    Unable to open desktop file epiphany.desktop for panel launcher
    Unable to open desktop file evolution.desktop for panel launcher
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0.  This shouldn't happen!
    waiting for X server to shut down gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
    (vmware-user:4943): Gtk-WARNING **: cannot open display: :0.0

    Not sure if this will help as I don't run gnome, but after a recent update when I ran startx I was getting a bunch of those doodad errors myself.  After going through http://bbs.archlinux.org/viewtopic.php?id=56072 and disabling numlockx in my xinitrc I had no more errors.
    Last edited by Pi (2009-12-22 17:49:11)

  • .DOC output from Documaker 11.5 ?

    Hi,
    Can any one tell me how to generate .DOC output from Documaker like .PDF ?
    We need to change in INI settings. I tried and generated .DOC file but when i opened all are Junk characters in the Word document.
    Please help what changes exactly we need to make in INI files ?
    Note: I have tried generating .RTF format in the output.That's working fine. Then why not .doc ?
    Thanks & Regards,
    RAMAN C
    Edited by: 969704 on Jan 8, 2013 3:39 AM

    There are a lot of options with the RTF Print Driver in Documaker and new features in 12.0 and 12.1. Be sure to review the documentation. To see what's available in 12.1 see the Printers Reference at http://docs.oracle.com/cd/E22582_01/printers_rg.pdf.
    -DA

  • Printing from CS3 to Epson R2400

    I've been very happily printing from Photoshop CS3 to the Epson until today and now it just point blank refuses to do so. Connections between the printer and computer are ok because it prints from other software programs. But when I try to print from CS3 it draws the paper into the printer and then stops dead and opens up a dialogue telling me the job is stopped and nothing will coax it into resuming it. I've tried clearing all other jobs and turning off the printer and rebooting the Mac but nothing. I haven't even bothered with the manufacturers because I just know everyone is going to pass the buck to everyone else. Any suggestions for what I can try to fix this?
    Thanks
    Geoff

    A year later I found this posting ... I am having the same problem but from CS3 to HP Deskjet 1200c on a G5. Worked fine for years, now print jobs stop every time. I have replaced the driver, deleted and added the printer, unplugged and replugged all cables, restarted the computer, output to a different printer, etc. This is a USB connection. After poking around for help on the HP and Apple sites, I tried printing from different applications. Apparently, the problem is only with Adobe applications, having tried both InDesign and Acrobat. Printed fine out of Thunderbird, Firefox, and Word. However, I then tried printing out of both Firefox and InDesign from my MacBook on my wireless network. Both printed fine! So the problem appears to be Adobe applications on my USB connection. Is there one little setting I'm missing?

Maybe you are looking for