Strange output from lm_sensors with HP Compaq 6510b

I'm having troubles understanding what my CPU temperature is when using lm_sensors on my HP Compaq 6510b.
$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +46.0°C (crit = +105.0°C)
temp2: +30.7°C (crit = +108.0°C)
temp3: +50.0°C (crit = +110.0°C)
temp4: +50.0°C (crit = +256.0°C)
temp5: +49.0°C (crit = +108.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +51.0°C (high = +100.0°C, crit = +100.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +51.0°C (high = +100.0°C, crit = +100.0°C)
This is not the usual output that everyone else seems to get. I'm guessing Core 0 and Core 1 are the CPU temperatures? But why does the wiki say that I should expect some other format? And why don't I get that type of output?

Rather than having disk target numbers, format now see's the disks WWN or World Wide Number. If you look at your output, disk 0 and disk 1 have the standard c1t0d0 and c1t1d0 identifiers, but the targets on controller 11 and 12 show the WWN for the LUNs/disks on the EVA3000. This is to help with multipathing etc. Yes it is on to slice the LUNs/disks.

Similar Messages

Strange Output From CS3 to Fiery printers

When we output from Indesign CS3 we get a couple of strange issues to our fiery and one new issue just started with our Harlequin RIP.
When printing a multi page document to the Fiery's (5 Different ones) sometimes page 1 will be oriented correctly and all of the other pages will be rotated on the sheet and cut off. Also when I go to make changes through command workstation to change duplex settings, image shift etc. It's a crapshoot if it will work on Indesign files. This has been happening with all iterations of Leopard.
When printing to the Harlequin using a preset envelope template the file is oriented wrong. It doesn't matter if we put the sizes in manually or how we set the orientation in the print window it's wrong. This has been happening for a few weeks.
Curretly we are on 10.5.5

Sorry I wasn't clear. The rips are the print servers. They are hooked to a variety of printers Xerox, Konica, Canon and Presstek. The problem is when I send the file and preview it at the RIP. The problems are also there when I output the files from the Rip to the printers.
The Fiery Problem is ocuring on several different Fiery RIPS each connected to it's own printer. We only have on Harlequin RIP and Device so I'm not sure how widespread it is. The problems do not exist if I send PDF's or other native files such as quark.

Strange output from permissions repair

This not so much a problem but a question. When I did a routine permissions repair, I got the following message:
Repairing permissions for “Startup HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
I have never seen a message that is headed, "Warning," and I don't know what it all means nor what to do about it if action is required.
Anyone know what this all means?
Thanks!

Well, you are right. Using the link you provided, the warning lines went away. I wonder how you knew to use that update other than the other? It took just short of 10 hours to do that download - more actually, but I didn't count the number of times I had to restart the download due to losing carrier during the download.
Apple is killing me with these enormous downloads. I live in a rural area, too far away from the road to use cable, so no broadband. The population density isn't there for Verizon or other carriers to make DSL available. I could use a satellite service but it is just way too expensive both with the monthly subscription price and with the investment in hardware needed. 109 megs to make this problem go away. Just not right. I think Apple forgets that many people do not have a high speed connections.
Anyway, thanks again.

Strange output from prtdiag

I inserted the 2nd CPU into the E250 and turned on the system. Upon the banner shown, I did Stop-A and type in 'boot -r' at the ok> prompt. It continued and eventually gave me the login prompt. Once I logged in and did prtdiag, I get conflict information as to how many CPUs are running: the first line says there are two while the CPUs section shows only one. Did I do something wrong?
Below the the output.
Thanks!
# ./prtdiag -v
System Configuration: Sun Microsystems sun4u Sun (TM) Enterprise 250 (2 X Ultr
aSPARC-II 296MHz)
System clock frequency: 99 MHz
Memory size: 1280 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
SYS 0 0 296 2.0 US-II 2.0

What directory are you running prtdiag from?
Also, there should be more to that after the CPU, did you truncate that output?
Daryl

Strange output from format command

Hi,
We have a Sun V480 running Solaris 8. We have installed 2 SG-XPCI2FC-QF2 fibercards. They are connected to an EVA3000 system. SFS newest version are also installed.
Have configured the cards with the cfgadm command. But when i run a format command i get this output. Normally it will show somthing like this c1t0d1. But here it shows c11t50001FE15005F54Dd1
format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w21000004cf8ffa54,0
1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w21000004cf96abc8,0
2. c11t50001FE15005F54Dd1 <HP-HSV200-5020 cyl 6398 alt 2 hd 128 sec 128>
/pci@8,700000/SUNW,qlc@1/fp@0,0/ssd@w50001fe15005f54d,1
3. c11t50001FE15005F549d1 <HP-HSV200-5020 cyl 6398 alt 2 hd 128 sec 128>
/pci@8,700000/SUNW,qlc@1/fp@0,0/ssd@w50001fe15005f549,1
4. c12t50001FE15005F54Cd1 <HP-HSV200-5020 cyl 6398 alt 2 hd 128 sec 128>
/pci@8,700000/SUNW,qlc@2/fp@0,0/ssd@w50001fe15005f54c,1
5. c12t50001FE15005F548d1 <HP-HSV200-5020 cyl 6398 alt 2 hd 128 sec 128>
/pci@8,700000/SUNW,qlc@2/fp@0,0/ssd@w50001fe15005f548,1
Specify disk (enter its number):
Can anyone explain this? I was possible to format the disk. But are this OK?
Thanks,

Rather than having disk target numbers, format now see's the disks WWN or World Wide Number. If you look at your output, disk 0 and disk 1 have the standard c1t0d0 and c1t1d0 identifiers, but the targets on controller 11 and 12 show the WWN for the LUNs/disks on the EVA3000. This is to help with multipathing etc. Yes it is on to slice the LUNs/disks.

Strange output from my java file

Hi all,
I made a post not long too long ago about some issues i was having. However since then i have not been able to come online or continue much with my work. I've just starting working on it again and after fixing the errors and implementing a little more code i had an unexpected output.
Compiles fine, no errors Just a warning about not checking my vectors etc. But when i run the class file it does not display the grid like i thought it would.
My code is below, but first is what i get when i run the class file after compiling.
[[I@1fc4bec
import java.util.Arrays.*;
import java.util.Random.*;
import java.lang.*;
import java.util.*;
public class SnakeGame
            //Fields
           final int
                     GRIDSIZEX        = 31,   //Stores the horizontal size of the grid
                     GRIDSIZEY       = 31,   //Stores the vertical size of the grid
                     SNAKESTARTX      = 15,   //Snakes horizontal start possition
                     SNAKESTARTY      = 15,   //Snakes Vertical start position
                     SNAKEBODYOFFSETX = -1,   //Does the body go left (neg) or right (pos) at start
                     SNAKEBODYOFFSETY = 0,   //Does the body go up (neg) or down (pos) at start
                     BLANK            = 0,   //Flag for blank space
                     WALL             = 1,   //Flag for wall
                     SNAKEHEAD        = 2,   //Flag for snakeshead
                     SNAKEBODY        = 3,   //Flag for snakesbody
                     FOOD             = 4,   //Flag for food
                     FRUIT            = 5,   //Flag for fruit
                     SNAKEATER        = 6;   //Flag for snakeater
             int[][] boardGrid; //the playing field
     public static void main(String[] args)
          SnakeGame snakeGame = new SnakeGame();
          snakeGame.initBoard();
          Vector Snake = new Vector();
          String h1 = new String("+");
          Snake.add(h1);
          String b1 = new String("~");
          Snake.add(b1);
          int x;
          int y;
     public void wall()
          char TOP_BOTTOM = '_';
          char LEFT_RIGHT = '|';
     public void food()
          char F = 'F';
          Object food = new Object();
     public static Object grid()
          Object Grid = new Object[31][31];
          Random x = new Random(31);
          Random y = new Random(31);
          return grid();
               * This method sets up the playing field by placing the walls around the edge, snake at start,
               * and the blanks.
               private void initBoard()
                              boardGrid = new int [GRIDSIZEX][GRIDSIZEY];
                          for(int row = 0; row < boardGrid.length; row++)
                                  for(int col = 0; col < boardGrid[0].length; col++)
                                                  //Insert a wall around edge
                                                  if (row == 0 || row == (boardGrid.length -1) || col == 0 || col == (boardGrid[0].length -1))
                                                         boardGrid[row][col] = WALL;
                                             //Insert the snakes head
                                             else if (row == SNAKESTARTX && col == SNAKESTARTY)
                                                     boardGrid[row][col] = SNAKEHEAD;
                                             //Insert the snakes one body peice
                                             else if (row == SNAKESTARTX + SNAKEBODYOFFSETX && col == SNAKESTARTY + SNAKEBODYOFFSETY)
                                                          boardGrid[row][col] = SNAKEBODY;
                              else if (row == FOOD && col == FOOD)
                                   boardGrid[row][col] = FOOD;
                                                  //Make all the rest blanks
                                             else
                                                boardGrid[row][col] = BLANK;
               System.out.println(boardGrid);
}

When you want to print an array then you can't just do
System.out.println(someArray);This implicitly calls .toString() on the array which produces the result that you saw (= something that isn't very useful).
You could write
System.out.println(Arrays.deepToString(someArray));(after inporting java.util.Arrays).

Relational output from XML with attributes

I'm using a 10g
I have this XML.
<items>
<item name="Book" price="12" itemnumber="230" quantity="57" detail="Oracle book" company="Oracle" />
<item name="Book" price="23" itemnumber="244" quantity="7" detail="XML book" company="Oracle" />
</items>
I want the following relational output:
name price itemnumber quantity detail company
Book 12 230 57 Oracle book Oracle
Book 23 244 7 XML book Oracle
I am new to this xml stuff and would appreciate any help.
Thanks!

You can solve this via xmltable (>= V. 10.2) or the use of a table(xmlsequence(extract())) contruct (<= V. 10.1 <<) or, for instance, via XQuery (>= V. 10.2).

Strange output from jrcmd print_memusage (R28)

Hi guys,
my jrcmd print_memusage tells me that my my heap is exactly the same size as my 'Compiled code' memory space:
Total mapped 3709432KB (reserved=1053884KB)
- Java heap 1048576KB (reserved=0KB)
- GC tables 35084KB
- Thread stacks 46848KB (#threads=162)
- Compiled code 1048576KB (used=50879KB)
- Internal 904KB
- OS 64836KB
- Other 641440KB
- Classblocks 47616KB (malloced=47354KB #116850)
- Java class data 772096KB (malloced=772015KB #557889 in 116850 classes)
- Native memory tracking 3456KB (malloced=1451KB #10)
This seems very weird to me, why would these 2 things be exactly the same?

seems like a large amount of memory for compiled code but thanks for the response. Good to know the result is a sane one.

Great output from iMovie with still photos

I have made a great movie using just stills in iMovie.
http://www.youtube.com/watch?v=_Crs1Mx92js
Enjoy!
Ian

Just tried to be witty.
One starts to associate in a predictable way - some times. As my fellow student.
Have no AppleTV
Have no broad-band internet - still 50kb modem V.92
So my interest is howto get as good result possibly to share - and DVD or BD-DVDs
are the only solution I've got via iM'08 or 09 or 11
Else (iM6/FC) - I copy back To Camera or if small save out as QT on DVD or BD-DVD.
Wish I could figure out a way to get all funny things in iM'11 and over in HD resolution
on just anything.
- Will try if I can get it out on USB-memory - one way or another.
Yours Bengt W

Problem with Alt Text output from thumbnail image of Lightbox widget

I’m having a problem with the Lightbox widget not producing alternative text based on the image properties. I’ve set ALT text for the image properties on both the larger Ligtbox image as well as the thumbnail. But the HTML output from Muse does not include the ALT text on the thumbnail version of the image. Here’s an example:
    <div class="popup_anchor">
       <div class="Thumb popup_element clearfix" id="u4409">
        <a class="anchor_item grpelem" id="untitled"></a>
        <div class="grpelem" id="u4433">
         <img id="u4433_img" src="/images/n0060292x292.jpg" alt="" width="292" height="292" />
This may be a problem that came in a previous release of Muse. I have a few older examples where ALT text is produced, but it’s no longer updated if I update the Image Properties.

I'm seeing the same problem. Looks like a bug to me. Any ideas as to how we can get this on Adobe's bug fix list?

Is any one else have issues with interactive PDF output from InDesign CC (2014)

I am currently trying to produce a document with a level of interactivity I have achieved many times before.
The interactivity is just a web style menu, show/hide the menu shows button set one, clicking on those shows a second set of buttons, and clicking in one of those goes to destination page and hides all menu buttons once more.
When output from ID CC 2014 the result is loads of missing buttons and no working menu.
Its not a corrupt ID file. I tried a brand new empty file, recreated basic structure with simple one state buttons and achieved similarly useless results.
If I back save using IDML and open in CS5, export from there, it works beautifully, so problem is not as many have been recently, to do with Acrobat browsers.
If I back save and open in InDesign CC (not 2014), export from there, it doesn't work, so problem is shared there!
Anybody any suggestions? Experienced similar and found a cure?
SOLVED BY A COLLEAGUE:
You can (no longer) use full stops/decimal points in button naming. Menu was hierarchically labelled as 1, (1.1, 1.2), (1.1.1, 1.1.2) etc.
Renamed 1_1, 1_1_2 etc and all functionality has returned. Why you could and now you can't, who knows!
Hope this helps you if you stumble across here with the same issue.

Thank you for reporting this.
I would consider this a bug in InDesign CC v9.x and v10.x and would report it:
Adobe - Feature Request/Bug Report Form
(Cannot test it right now.)
Uwe

View output from report output,display with null row

Hi ,
I view report output through browser,but the output content include with a null row inside.

Hi
That doesn't possible, so don't worry
what U need to consider is zoption-tdprogram has to have the name of main program, so the program where the variable are defined.
This field isn't usually filled, because the main program is the driver program (i.e the program where the sapscript is called), it need to fill it only if the program where the variable are defined is not the driver program.
So i believe this (your) code:
REPORT z_sapscript.
DATA TEST_NAME(20) TYPE c.
CLEAR usr01.
SELECT SINGLE * FROM usr01 WHERE bname = sy-uname.
zoption-tddest    = usr01-spld.        "Output device (printer)
zoption-tdimmed   = 'X'.               "Print immediately
zoption-tddelete = 'X'.               "Delete after printing
test_name = sy-uname.
CALL FUNCTION 'OPEN_FORM'
     EXPORTING
         application        = 'TX'
         device             = 'PRINTER'
         dialog             = 'space
         form               = 'Z_TEST_SAPSCRIPT'
         language           = sy-langu
         OPTIONS            = zoption
     IMPORTING
          language           = sy-langu
       EXCEPTIONS
         OTHERS     = 1.
IF sy-subrc 0.
LEAVE PROGRAM.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
     EXPORTING
         window        = 'MAIN'
     EXCEPTIONS
          element       = 1.
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
    unopened = 1
    OTHERS   = 2.
It should work now
Max

No output from Simulink to LabVIEW with Simulation Interface Toolkit (0/1)

I'm able to send data from labview to simulink, but the labview
display doesn't show any output from the simulink model. I've attached
two very simple labview and simulink files which gives me this
problem. I have the same problem when trying to implement the sinewave
example in the manual for the toolkit as well.
I'm using LabVIEW 7.1 Pro, Matlab 6.5 and Simulink 5.0 on WinXP pro.

The Simulation Interface Toolkit 2.0.1 or earlier does not work with LabVIEW 7.1. There is a patch available (or available soon) from NI support that corrects this problem. THe patch is Simulation Interface Toolkit 2.0.2.

Hello. Since I bought my new MacBook Pro I am having issues with the home sharing with Apple TV. I can't access my computer from the Apple Tv, although both home sharing options are on. I can choose Apple Tv as an output from my MAC though.

Can't see my computer from the Apple Tv although home sharing is on in both devices and I can choose Apple Tv as an output from my computer.

The following article(s) may help you.
Understanding Home Sharing
Setting Up Home Sharing On A Computer
General Homesharing Help 3
(75) (10) (35) (-30) (140226)
Welcome to the Apple Community.
The following article(s) may help you.
Troubleshooting Home Sharing
Security Software Issues
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

[SOLVED] Compaq 6510b fan control

Hi all !
I installed Arch a few days ago on my laptop, a HP Compaq 6510b. Almost everything is ok, but I have a little problem with my fan. I installed cpufreqd for frequency scaling, it's ok. Then I wanted a daemon to control the fan according to the temperature, so I searched in the Wiki and found a guide.
I first installed lm_sensors, and it detected no sensors but the CPU core temp sensors. I went to the lm_sensors website, and seen that it can't work on Compaq computers. No sensors, nothing but core temp returned by hwmon, no voltage... So the daemon from the guide can't be used.
So I looked in /proc/acpi, and played a little with what I found in it. There are five fans displayed in /proc/acpi/ : C3C1, C3C2, C3C3, C3C4, C3C5. They can be turned on and off, and the real and only fan will change it's speed according to the "highest" fan activated, eg :
C3C1 : speed 5 (max)
C3C2 : speed 4
C3C3 : speed 3
C3C4 : speed 2
C3C5 : speed 1 (min)
So, if I turn C3C1 and C3C3 on, the fan turns at speed 5, and when I turn C3C1 off, it falls down to speed 3. I wrote a little script and made a menu on my desktop so I can set in one click the speed of the fan. Is this normal ? Or is it just due to the Compaq hardware which is not very well understood by the kernel ? In the same way, I have a thermal zone, TZ5, which indicates the fan speed. 0 °C : fan speed < level 3, 100 °C : max speed. :-/
Sooo... Does anybody knows a fan managing daemon, which could be configured to read CPU's temp and
1. Turn on / off several fans ?
or
2. Call a script for each temp value ?
I think I could also write a script doing this, and configure cron to launch it every 10s or so. What do you think ?
Last edited by Vladislav IV (2008-06-24 10:45:53)

ibendiben wrote:stop! ho! what guide? The cpufreq daemon is not what you are looking for? Why not?
Yes, I use cpufreqd for CPU scaling, it works. But after that, I wanted to control the fan given the temperature, which is another problem. Even though I set up cpufreqd to speed up the fan when the CPU's hot, it don't satisfy me. There is more sense giving this particular job to another process, which will not be ruled by the processor scaling one.
ibendiben wrote:I don't like that, I have a Compaq myself: 6710b... but can you explain what daemon you are talking about here?
This guide : http://wiki.archlinux.org/index.php/Fan_control explains how to set up lm_sensors, then how to set up the fan controling system with pwmconfig.
The problem is that lm_sensors doesn't work on Compaq stuff (it doesn't detect any sensor but the core temp, but no fan speed, no voltage...), and the only way I can control the fan on my laptop is to turn on/off these five virtual fans. Look at the guide, it is written :
FCFANS= hwmon0/device/pwm1=hwmon0/device/fan1_input
The real problem is : if I look in the devices under hwmon0, there is no fan input ! So pwmconfig can't regulate the fan speed. That's why I looked for another solution.
Also, as I looked at the thermal zones, I found the one which is supposed to control the fan :
$ cat /proc/acpi/thermal_zone/TZ0/trip_points
critical (S5): 256 C
active[0]: 82 C: devices=C3C1
active[1]: 74 C: devices=C3C2
active[2]: 66 C: devices=C3C3
active[3]: 45 C: devices=C3C4
active[4]: 30 C: devices=C3C5
Given the critical temp (256 °C) I think it's the GPU sensor (but I think 256 °C is quite hot, even as critical, for that kind of GPU...). As you can see, it should increase the fan speed when this thermal sensor reach 30, 45, 66... But in fact, it's always < 50 °C, so the fan will keep turning slowly. Even if the CPU is at 65 °C So I thought it was not stupid to speed up the fan while looking at another thermal sensor (the CPU in my case).
I think I should also improve my script to make it look at several temperatures (CPU, GPU...) and adjust the fan speed to keep cool every component.
ibendiben wrote:Does every laptop (mine?) have several fans? The reason I'm interested is that my fan is blowing like hell and I can feel parts of the bottom are quite hot. So only when I use cpufreq scaling powersave to 1ghz the fan will rest in peace.
You're script is interesting and I could go and test it, but I'd like to know a little more first.
There are one or two fans, even three for the more powerful ones (with dedicated gaming 3D card), but in my case (6510b) there is only one. One physical, but under /proc/acpi/fan there are five fans, which correspond to the five speeds of the laptop's fan.
You can always install lm_sensors and a ressources monitor (I use gkrellm) to keep an eye open on all the temperatures and CPU usage. Then go under /proc/acpi/fan, and if you have four or five fans (like C3C1, C3C2, ..., C3C5), you can turn them on, one at a time, from the last to the first. You should hear your laptop's fan speed increase as you activate the different levels.
Oh, and as I said, in my case the thermal zone TZ5 is the fan speed. So don't panic if you see a thermal sensor going from 0 °C to 100 °C while you play with the fan

Strange output from lm_sensors with HP Compaq 6510b

Similar Messages

Maybe you are looking for