Strange permission(?) problem

Hello,
bought Lacie Porsche 2Tb and formatted into 2 partitions with diskutility.
One partition used with CarbonCopyCloner, the other for Time-machine.
PROBLEM: after about 20 minutes the time-machine partition is mounted and working well, it becomes unwritable.
By that I mean that I can't write or erase (obviously backup fails) but can read.
Also as root, also from Terminal using cp, rm etc. (specifically the error is "invalid argument" whatever I try to cp, or rm)
Need to force unmount (does not unmount nicely, although lsof reports nothing).
Thinking it is a permission problem have already:
reformatted,
repaired all that one can repair (no problems reported).
Also, strange thing (maybe related?)
ls -l /Volumes
reports (myname is the username)
drwxrwxr-x   9 myname staff   374B Dec 16 01:57 Time-Machine/
but
sudo ls -l /Volumes
reports
drwxrwxr-x   9 _unknown _unknown   374 Dec 16 01:57 Time-Machine
(OSX 10.6.8)
I am not totally clueless around osx/Unix, but this one baffles me.
Some more to sink teeth into:
   Device Identifier:        disk1s3
   Device Node:              /dev/disk1s3
   Part Of Whole:            disk1
   Device / Media Name:      Time Machine
   Volume Name:              Time-Machine
   Escaped with Unicode:     Time-Machine
   Mounted:                  Yes
   Mount Point:              /Volumes/Time-Machine
   Escaped with Unicode:     /Volumes/Time-Machine
   File System:              Journaled HFS+
   Type:                     hfs
   Name:                     Mac OS Extended (Journaled)
   Journal:                  Journal size 131072 KB at offset 0x30e4000
   Owners:                   Enabled
   Partition Type:           Apple_HFS
   Bootable:                 Is bootable
   Media Type:               Generic
   Protocol:                 USB
   SMART Status:             Not Supported
   Volume UUID:              ACFC7201-F6A6-36A0-8AF4-9B9E405F7357
   Total Size:               1.7 TB (1679521808384 Bytes) (exactly 3280316032 512-Byte-Blocks)
   Volume Free Space:        1.4 TB (1400958722048 Bytes) (exactly 2736247504 512-Byte-Blocks)
   Read-Only Media:          No
   Read-Only Volume:         No
   Ejectable:                Yes
   Whole:                    No
   Internal:                 No

Ok, I report that this seems to have been resolved (maybe it will help others...)
The problem was the firmware of the drive (LaCie Porsche P'9230). It needs a firmware update that can be found on LaCie's support/download page. I have updated and the problem has not recurred (..yet..).
Thanks for reading!

Similar Messages

Recurring disk permission problems.

I am having recurring disk permission problems on my MacBook Air (Rev. A 1.6GHz/OS X 10.6.6).I am using Onyx to verify and repair disk permissions, but after about a week the computer seems to slow down and respond strangely. I run Onyx again, and it repairs many disk permissions, but the same thing happens again after about a week. Below is the log from a repair disk permissions that I ran through Onyx earlier today.
What can I do to fix this problem? Any help would be greatly appreciated!
Started verify/repair permissions on disk0s2 Macintosh HD
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar"
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib", should be 0, user is 95
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist"
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries", should be 0, user is 95
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries"
Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar"
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0/libprofilerinterface.sl"
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0w/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0w/libprofilerinterface.sl"
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0/libprofilerinterface.sl"
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0w/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0w/libprofilerinterface.sl"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar "
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar"
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib", should be 95, user is 0
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar", should be lrwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar", should be lrwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar", should be lrwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist"
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries", should be 95, user is 0
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle", should be drwxr-xr-x , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib"
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0/libprofilerinterfac e.sl", should be -rwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0/libprofilerinterfac e.sl"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0w/libprofilerinterfa ce.sl", should be -rwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0w/libprofilerinterfa ce.sl"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0/libprofilerinterfac e.sl", should be -rwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0/libprofilerinterfac e.sl"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0w/libprofilerinterfa ce.sl", should be -rwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0w/libprofilerinterfa ce.sl"
Finished verify/repair permissions on disk0s2 Macintosh HD
Message was edited by: Mr. Mojo Rising

http://discussions.apple.com/thread.jspa?messageID=12699721&#12699721

Strange wifi problem on a brand-new MacBook Pro

Hey there, I'm new here. Desperation has got the better of me, and I hope I can get some advice.
So, last sunday I bought a brand new 13" MacBookPro with 2.8g i7 processor and 10.7.2 OS (I can't update to 10.7.4 because System Update tells me the download has been tampered with or corrupted after I waited 2 hours for it to finish, but I'm trying a direct download from the website). Here's the exact product: http://www.amazon.com/Apple-MacBook-MD314LL-13-3-Inch-VERSION/dp/B005CWIZ4O/ref= sr_1_5?ie=UTF8&qid=1340301247&sr=8-5&keywords=macbook+pro+13
Everything is all perfect except for a strange wifi problem. Note that the wifi does not turn-on or off, it doesn't disconnect after 'sleep', it doesn't get less speed, it doesn't constantly leave a preferred connection (once I chose my home wifi it always connects to it no problem). The wifi bar is always full. What is wrong is that the internet is kinda 'glitchy'. The best metaphor I can think of is that it's like a car that has to be pushed down the road before the engine can start. Please, bear with me because this is kinda hard to explain and I'm not good at tech lingos.
One of the symptoms is browsing can get really slow and inconsistent, almost as if the wifi gets turned off in the middle of browsing. For example: if I look something up on Google and then open 5 new tabs, probably only 2 or 3 of those tabs will eventually load while the other two will not get past the long 'http:.......google.....etc etc' address and will eventually show one of those 'error loading page because there's no Internet connection' notice. This happens a lot. Sometimes I have to refresh/retry loading a page a couple of times before it finally loads, then usually everything will get back to normal and I will be able to open multiple tabs with no problem, but in a couple of minutes I would try to open another site and the problem will start again.
So I tried to see how it does with downloading using iGetter. Fortunately I also have a Macbook (white-plastic casing one) and my brother has an old 2006 MacbookPro so I can compare. With those two older Apples iGetter starts receiving data in less than 8 seconds after I click Start, while my brand-new Macbook Pro can take up to 15-20 seconds, sometimes it doesn't even start at all and I have to re-click the start button. But once the download actually starts (on my new MacBook Pro), it downloads like normal, it doesn't stop and the speed is also as good as I can get. Strange huh? Hence, like a car that has to be pushed before the engine starts.
I also tried 'speed testing' from a website with all 3 laptops. On my old MacBook and my brother's MacBook pro, once I click 'begin test' it takes only a couple of seconds of 'ping' before the download/upload speed measurements start, but with my new MacBook Pro (just like with iGetter) it takes up to almost a minute before the measurements start, sometimes it won't start at all and I have to re-start the test.
Well, thanks for reading. And hope you can help me shed some light into this. Because it is really preventing me from really enjoying my new MacBook Pro. And if this is most likely a hardware problem, I'd better get back to the store and try to get it replace or something while it's only been 5 days. *cheers*

Hey guys.. Thanks for the replies. Unfortunately, I bought the MacBook in Indonesia where there are no such thing as an AppleCare. The only option is to leave the Apple product to one of the 'Authorized Apple care centre' and have whoever do whatever to it without guarantee of success. As for returning it and getting a brand new one, I also don't know if there is such a deal here, but that's actually a good idea, will try to go to the store tomorrow. Although, I'm worried that the problem might be with OSX Lion or something and getting a new one won't help.
mark75090, I've tried resetting the router when I first noticed te problem, didn't work though. I've checked my new MacBook's wi-fi (option+click wifi bar) and it says 'PHY Mode: 802.11g', so does my MacBook and the old MacBook Pro. I don't know what those mean though, and I don't know whether or not my router is an N., can you tell me more please.. I have tried with the other two turned off, and only the new MacBook using the wi-fi but the problem persists. I have also tried connecting directly to the router, but as I described, the problem is too subtle for me to notice the difference.
Also, if I create a brand new Wi-Fi connection in network preferences and connect to my router through the new Wi-Fi profile, the problem seems to be gone for an hour or so, then it always comes back though. I have also just finally installed 10.7.4, but it doesn't help either.

Back End Permission Problem

Hi everyone,
We encounter permission problems with our Visual Composer Applications.
We have created three applications using the visual composer and accessing a BI-system as backend
But the developer has super_user permissions and we dont want our endusers to have them.
Therefor we created new roles only with the permission to see that specific report.
But now, the users are not allwoed to see the data.
The error says, that I should ckeck the permissions.
Well, I did. The user can execute the queries I used directly with BEx - no problem, but within the VC-application not.
So I assume the problem are permissions in the portal.
If I give the user super_user permissions it works, but thats not what I want.
I want the user having minimal permissions in the portal.
Is there somebody who can help me?
Sincerely
Mark

Hi
Your problem looks like portal authorization issue. There is separate role for 'End Users' to execute & view the portal iview. Just check with your EP administrator, he will solve the problem. There will be role like -
*VC_Role.
*eu_Role.
Regards
Sandeep

[MX 2004} Can't upload! The file may not exist, or there could be a permission problem

I'm running MX 2004 on Windows XP. All's been well for the
last few months, doing site maintenance at this part-time job. I
get tangled up a bit in checking files in and out, coming from
GoLive, and since there's no one else with FTP access, yesterday I
told it to check the entire site in. I didn't have any changes I
didn't want to commit, and I figured that would keep things a
little neater.
As of today, I can post revisions to existing pages, or
resize image files, but when I create a new page, or try to place a
new image file on an existing page, I can't upload it.
So, to be clear: I have two pages already up on the site,
index.html and apple.html, with a link between them. If I create
new page banana.html and make a link to it from index, index.html
will upload that revised link, but banana.html is refused with the
message
FTP error: The file may not exist, or there could be a
permission problem
I know the file doesn't exist (remotely); I just made it.
I've gone to Prefs and disable Check In / Check Out, which didn't
do me any good. What next?

Can you open the FTP log, select one of these new files and
upload it- then
cut and paste relevant part of the ftp log?
Also- does this site have a "host directory", a subfolder
that your public
files need to go into? If yes- is this folder listed in the
host directory
line of the remote server info?
And odd past thing i've seen-
Had hosting that used public_html as the public folder name.
They also had a symbolic link named www that pointed to
public_html
Could upload/download existing files with www in "host
directory" line of
dw; but could not upload new files or work with files in
subfolders.
changing to public_html instead of the www symlink fixed this
for me.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Permission problems after upgrade to 10.5 on early Power PC G5 Tower

Permissions problems after upgrading to 10.5 on a client power PC (early) G5 tower.
Problems include folders that are created on XServe via this client do not allow any one else including this client to access. All other clients running 10.5, which happen to be newer Intel machines do not have this problem. Repairing permissions, updating to 10.5.1, try to manually correct permissions have all failed to repair the situation. All clients log onto the XServe with the same user/password. This client has since been downgraded back to 10.4.9 and has no issues.
The Xserve runs 10.3.9, any help would be greatly appreciated.
We have read through the forums regarding permission problems after upgrading and even tried some tips found here.

You really should check things out first before speaking.
Here are the requirements for 10.5;
Mac OS X v10.5 Leopard requires:
A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
512 MB memory or more
A DVD drive for installation
9 GB of available disk space or more
Some features require a compatible Internet service provider, fees may apply.
Some features require Apple's MobileMe service; fees apply.
Allan

Very Strange Internet Problems

I own a MacBook Pro 15.4 Inch that I purchased about a year and a half ago. I recently upgraded to Leopard and have all the latest updates. I am from the US, and when I am home my internet works fine. However, I am on travel to Seoul, South Korea right now and am having a very strange internet problem.
As far as I can tell, the URLs that I type in to my browser are, sparodially, not translated correctly into the webpages that they are supposed to represent. This problem is probably effective 75% of the time, and the rest of the time my internet works roughly correctly. For instance, when I enter http://www.google.com, instead of being taken to the Google homepage, I am taking to the homepage of Jammin Beats DJ Service, an obscure website about a company in northern Pennsylvania. The actual URL of this website is http://www.jamminbeats.com, but when my internet is malfunctioning, 'jamminbeats' is for all intensive purposes replaced by 'google' (that is, it applies not only to the main page, but to sub pages, so "http://www.google.com/weddings" takes you to "http://www.jamminbeats.com/weddings" and etc). For most other webpages, one of two things happens. Either I am taken to the correct page but it is displayed without any images or frames (just the html text and links), or I am taken to a blank page with the header "Under Construction", which I assume is the default for a page that doesn't exist. This is why it seems as though the URLs are simply being interpretted erroneously.
This problem occurs when connecting both to the wireless and the wired internet at my hotel, and it occurs on both Safari and Firefox, so it is not a connection-specific or browser-specific problem. It may be a problem with the hotel's internet, and as of yet I have not had a chance to test the computer at another location. However, a colleague using an IBM computer has had no problems, and I am currently on a Samsung machine in the business center of the hotel and it is working correctly as well. I have searched extensively online for a similar problem but have come up empty handed, and more than anything, I am confused about what might be causing this problem. The strangest thing is that a fraction of the time, the internet functions normally, but it is usually roughly 15 minutes out of every hour, and eventually I am inevitably taken back to Jammin Beats.
I am a computer science graduate but I still have no idea what would cause this problem. At first I thought it might be a hacker, but if it is, he or she has been at it consistently for 3 days now, and only seems to be targeting my computer. Any ideas or solutions would be greatly appreciated, as I have been forced to resort to the hotel's business center for checking email, doing work, etc. Thanks in advance.

I did consider that, as I was in Beijing last week and there are a number of censored sites. However, in Korea I have had problems with very basic sites like facebook, wall street journal, google, yahoo, Korean google, my hotel's webpage, etc. Further, I have successfully gotten all of these sites to load seemingly at random, and can access them without problems on other computers. The only disconnect seems to be between my MBP and the internet, not between Korean internet and the web. I have toyed around with the network settings, and although sometimes after switching from "Automatic" to a fixed connection I get some sites to work, it usually only lasts a short time and eventually the same sites stop working. I reset my cache regularly to make sure I'm not getting sent to cached sites, but this also doesn't help. Further, my Apple Mail, Skype and AIM accounts jump between being connected and disconnected randomly as well. Again, this is isolated to my own computer, which is why I'm so confused.

Looking for a way to solve permission problem in windows 7

one of the biggest problems i have with this windows that even that i'm an administrator and the owner of the computer i always have permission problems folders i get a no access errors with files and folders even thoughe i should have full permisions i belive system restore doesn't work for me because permissions problem and i don't know what to do anymore i'v used uac i'v disable uac i downloaded a registry file to take owernship on files and folders and still problems so what can i do to solve all this problems?
and to be honest i really don't like the way windows 7 behave with permisions this is my computer and i am an administrator why do i have to fight to access folders like System Volume Information,Recovery,Documents and Settings why do i get the lock icon when i take owenership and i'm on the users list but when i add users everyting is fine?
10x in advance.:)

Hello,
This is by design. You cannot access the folder or files are protected by operation system even if your current user account is Administrator.
System Volume Information is a hidden and protected system folder that the System Restore tools uses to store it information and restore points.
In Recovery folder, there are two files: Winre.wim and boot.sdi. With these two files, you are able to boot the system to Windows Recovery Environment (WinRE) and do a repair without inserting a Windows 7 installation disc.
If you want to access the protected folders like “System Volume Information”, use the following method, but I do not recommend you do this. It may cause some potential problems:
1. Right click the System Volume Information folder and choose Properties.
2. In Security tab, click Edit and then click Add. Type in “everyone”(without quote) and click Ok.
3. Then “Everyone“ will be listed under ” Group or user names”, click Everyone, and check “allow” full control option.
As BurrWalnut said, the “Documents and Settings”, it is a junction. A junction point is also a protected operating system folder that points to another folder. The junction point is an important part of application compatibility and does not contain any data or other files. In Windows Vista and Windows 7, the “Documents and Settings” folder has been replaced with “Users” folder. All of your user profiles are saved in C:\Users\User name folder.
Thomas Lin

Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored

Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored and updated firmware, deleted the account, anything I could think of, but it's just not accurately downloading the most recent emails.

The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.

"How to Resolve ORA-29532 Java 2 Permission Problems in RDBMS 8.1.6 and 8.1.7"

I'm in the process of publishing the following note (134280.1), titled "How to Resolve ORA-29532 Java 2
Permission Problems in RDBMS 8.1.6 and 8.1.7".
It will be accessible from Oracle Support's "Metalink" site.
"How to Resolve ORA-29532 Java 2 Permission Problems in RDBMS 8.1.6 and 8.1.7".
Problem Description
Periodically an application running in the Enterprise Java Engine
(EJE) formerly known as the "Oracle 8i JVM", "the JSERVER component", or
the "Aurora JVM" will fail with a "java 2" permissions error having the
following format :
Note : Message shown below have been reformatted for easier readability.
java.sql.SQLException: ORA-29532: Java call terminated by uncaught Java exception:
usually followed by a detailed error message similar to one of the following
messages :
Example # 1
java.security.AccessControlException: the Permission
(java.net.SocketPermission hostname resolve)
has not been granted by dbms_java.grant_permission to
SchemaProtectionDomain(SCOTT|PolicyTableProxy(SCOTT))
Example # 2
java.security.AccessControlException: the Permission
(java.util.PropertyPermission * read,write)
has not been granted by dbms_java.grant_permission to
SchemaProtectionDomain(SCOTT|PolicyTableProxy(SCOTT))
Example # 3
java.security.AccessControlException: the Permission
(java.io.FilePermission \matt1.gif read)
has not been granted by dbms_java.grant_permission to
SchemaProtectionDomain(SCOTT|PolicyTableProxy(SCOTT))
Explanation
The java 2 permission stated in line # 2 of each of the above "Examples"
has not been granted to the user specified in line 4 of the above "Examples".
Solution Description
The methodology to solve this issue is identical for all java 2 permissions
cases.
1) Format a call "dbms_java.grant_permission" procedure as described below.
2) Logon as SYS or SYSTEM
3) Issue the TWO commands shown below
4) Logoff as SYS or SYSTEM
5) Retry your application
For Example # 1
1) Logon as SYS or SYSTEM
2) Issue the following commands :
a) call dbms_java.grant_permission('SCOTT',
'java.net.SocketPermission',
'hostname',
'resolve');
b) commit;
Note: Commit is mandatory !!
3) Logoff as SYS or SYSTEM
4) Retry your application
For Example # 2
1) Logon as SYS or SYSTEM
2) Issue the following commands :
a) call dbms_java.grant_permission('SCOTT',
'java.util.PropertyPermission',
'read,write');
b) commit;
Note: Commit is mandatory !!
3) Logoff as SYS or SYSTEM
4) Retry your application
For Example # 3
1) Logon as SYS or SYSTEM
2) Issue the following commands :
a) call dbms_java.grant_permission('SCOTT',
'java.io.FilePermission',
'\matt1.gif',
'read');
b) commit;
Note: Commit is mandatory !!
3) Logoff as SYS or SYSTEM
4) Retry your application
References
For more details on java 2 permissions and security within the EJE, review
Chapter 5, in the Java Developer's Guide. entitled,
"Security For Oracle8i Java Applications"
The RDBMS 8.1.7 version can be found at :
http://otn.oracle.com/docs/products/oracle8i/doc_library/817_doc/java.817/index.htm

Hi, Don,
I solved the problem of security exception I mentioned at java procedure topic as following:
ORA-29532: Java call terminated by uncaught Java exception: java.lang.SecurityException
I tried to use your solution as following:
call dbms_java.grant_permission('SDE', 'java.net.SocketPermission', 'ORCL.COHPA.UCF.EDU','resolve');
but SQL*plus gave me a error message:
invalid collumn.
What's the problem?
However, I call a grant command as following:
SQL> grant JAVASYSPRIV to sde;
and then that exception is gone. What's the difference between dbms_java.grant_permission and grant command?
Thanks
Bing
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by don -- oracle support:
I'm in the process of publishing the following note (134280.1), titled "How to Resolve ORA-29532 Java 2
Permission Problems in RDBMS 8.1.6 and 8.1.7".
It will be accessible from Oracle Support's "Metalink" site.
"How to Resolve ORA-29532 Java 2 Permission Problems in RDBMS 8.1.6 and 8.1.7".
Problem Description
<HR></BLOCKQUOTE>
null

Facing permission problem for accessing database

{color:#0000ff}Hello All,
I have just started in this forum. I am very new to j2me and facing problem and I need your help.
I had successfully signed the application and it was working properly on device. Next I added login module in my application where I am accessing a PHP from server which is having MySQL DB connection for usercheck. When I try with unsigned jar it works properly and when I try using signed jar it is showing me wrong username/password. I think it is midlet permission problem.
It would be very nice if someone can tell me what might be the possibilities that it is going wrong.
Thank you.
Regards,
-Anuradha{color}.

Signing MIDlet has nothing to do with how data is send over the network. So please be sure that your signed MIDlet is not corrupting your data.
If you are receiving correct username / password at server side, then its server's responsibility to validate it Your MIDlet has posted the parameters right way.
I would suggest you to check following things
1) Check if server is validating the username / password.
2) What response does server sends you back after validating username / password. Check on both ends.
3) Check how your midlet processing the response from the server.
4) Do you get any exceptions?
but I am doing database connection through php which is on server, I hope it is not wrong way of doing it.Doesn't matter what technology is used at server side to connect to the database.

How do i fix this: error message- index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the ser

that is...
index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
index.html
thanks!

It's under More Options triangle in the Manage Sites panel. See screenshot:
Nancy O.

Permission problems in my newly installed hard drive from iMac 1 TB Seagate Hard Drive Replacement Program. Is that normal?

Just got back my iMac with a brand new replacement hard drive through the iMac 1 TB Seagate Hard Drive Replacement Program. With only apps installed, no files and fonts added, the hard drive already shows permission problems. Is that normal? The replacement hard drive is a Seagate again, ST31000528BAS. Do people like their replacement hard drive?

Just now looking at these... Last recall 2009 MacbookPro Video issues, I waited 4 years and it took 4 trips to apple store with video of the machine problems... Days and months past, finally with stern discussion with manager, got resolved. Now Drive recall on work machine... better take advantage now. IF IT AIN'T BROKE DON'T FIX IT!
Should have thought of it... Have TM full back up... (will look into clone next time, now that I see this). Take in 27iMac running 10.6.8, 5-7 days, what a joke, my boss will be happy to pay for a week without working. Finally get, "if you have TM back up, 3 days." Get machine back with 10.6.3, hit the R recovery, click TM back up, runs for 2 hours, reboots, looks great. Box up take back to office... update to install - OH CRAP, still running 10.6.3. Updates crash with error on install, BUG PROBELM, nothing runs.
Call Apple... after hours, tells me to boot using 10.6.2 disk, wipe, reinstall OS, udate to 10.6.8, THEN do the restore. GREAT! Only thing 10.6.2 DVD won't read... now back on phone... take back to the store, Genius says, "Oh, can't boot a newer system w/ old disk, that's why it won't read." PROMISES it'll be fixed, if you leave it over night... GREAT!
Pick up next day, supposedly, booted to disk, wiped drive, reinstalled, updated to 10.6.8 and did the RIGHT restore... Looks GREAT... apps run and 10.6.8 OS. Back to the office... CRAP!! not running right... fonts messed up, drop box app needs new install, cocktail needs upgrade, Fetch not working, memorized paths gone... back ups locked out of permissions... ***!!
4 hours on phone with apple and still not solved. Evidently... either different account names caused problems... and/or they never restored personal "settings". Seems there are 3 ways to restor... Running Migration Assistant, Restoring after they load a new OS... or NOW WAITING for them to send me a bootable 10.6.3 disk and then boot from disk, w/o installing OS and doing a restore from TM.
Can begin to make enough stink!! So now can't back up without doing a full 400 GB back up and possibly destroying any good back ups... can't work, liek having hands tied behind back. WAITING for solution! TICKED OFF!!!

Permission problems. new to snow lepored

Hi i just recently bought an appple mac pro from ebay it came with snow lepored installed. i have been having some permission problems and need some help fixing then. here are the problems that are not getting repaired through the disk utility.
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib", should be 0, user is 95.
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist", should be lrwxr-xr-x , they are lrw-r--r-- .
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries", should be 0, user is 95.
Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0w/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0w/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar", should be lrwxr-xr-x , they are -rwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar", should be lrwxr-xr-x , they are -rwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar", should be lrwxr-xr-x , they are -rwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle", should be drwxr-xr-x , they are lrwxr-xr-x .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
any help with this would be greatly appreciated??

Welcome. You can ignore these. We all get them.
http://support.apple.com/kb/TS1448
Staticuss wrote:
i have been having some permission problems and need some help fixing then.
Are there other issues?

Account rights and Permission problems!

I have since few day´s MacKeeper installed, but even when I restart my Mac. I can´t use Internetsecurity because of permission problems I have no access to helperlaunch. My Account has Admin rights but helperlaunch get´s the information that I have not the rights to access. When I get a new Account with the same rights it will work. How can I change this at my Original Account?

Open disk utility and repair permissions on your boot volume.
Then, follow this to reset your user permissions:
Turn on the Mac whilst holding down cmd + R. You can let go once you see a spinning dial. You will then see the ”Mac OS X Utilities” screen.
On the top menu, click Utilities, then click Terminal.
Type resetpassword and press Enter.
Click on your main hard drive.
In the dropdown box under “Select the user account” make sure to select your username.
Underneath where it says “Reset Home Directory Permissions and ACLs”, click the Reset button.
Press cmd + Q to quit the Reset Password application.
Press cmd + Q again to quit the Terminal.
Press cmd + Q one more time and click Restart.

Strange permission(?) problem

Similar Messages

Maybe you are looking for