Strange popup message

I just started receiving a strange popup message saying that the device is not compatible with the select device. I do not have my iphone connected to anything nor any network. How do i get it to stop or do i take it back to apple??

Clean out the docking port as dirt/lint may be in there.
Next reboot the phone:
Hold BOTH the HOME and LOCK buttons.
DO NOT let go when it says slide to turn off.
KEEP holding both until screen turns off and comes back on to Apple Logo.

Similar Messages

Can't reconnect, strange popup message

I find after a long period of inactivity forms will ofter lose its connection. Am learning forms at home so server and client soft is on ssame machine. When i go to the file menu and choose CONNECT or DISCONNECT I get a popup box containing a large X symbol and some unintelligible ascii characters, anybody know how I can resolve this.
Regards
Fergus
Forms 6
Server 9i

I have found if my Windows laptop goes into standby mode, the connection to the Oracle DB on the laptop gets screwed up like that. Set your system to NEVER standby, and see if that helps.

Ios 8.3 strange popup

Hi guys,
After upgrading to ios 8.3, I've seen a strange popup on both an iphone 5 and an iphone 6. Both popups were identical, looked unofficial, and did not fit the screen. The iphone 5 appeared while opening snapchat, the iphone 6 popup appeared while on the home screen. Both were dismissed by software reset and are yet to reappear.
Popup message was "Delete ALL Stored messages from your ph" on a grey screen, with only a white dismiss button on the bottom. Home button and lock did not remove the popup.
Does anybody have any idea what these are? iOS glitch or perhaps something more nefarious?
Cheers.
Screenshot from iphone 6 below.

Even after commanding Siri, and even after deleting then re-installing my copy of Spiral Code Studio LASER PUZZLE, my copy of Spiral Code Studio LASER PUZZLE was still affected by a stray, rogue SWITCH CONTROL setting somewhere, I wish there were an option to have my iOS SWITCH CONTROL settings permanently removed from my device.

Closing the browser without popup message

Hi Experts,
I refered the following thread and done the below steps
1.Create a Button called Exit.
2.Create an action for this button.
3. In the event handler for this button, write the following code:
String Url;
try {
Url = WDURLGenerator.getWebResourceURL(wdComponentAPI.getComponent().getDeployableObjectPart(),"close.html");
wdThis.wdGetAtpEmpDetailsWinInterfaceViewController().wdFirePlugExitPlug(Url);
} catch (Exception e) {
wdComponentAPI.getMessageManager().reportException("Technical Exception occured in the application : " + e.toString(), true);
4.Create a html page called u201Cclose.htmlu201D with Javascript code for closing a browser window.
5.Place this html page in SRC -> Mimes -> Components -> Project Structure(Create this folder and place the html page in this folder)
I have used Ie 7.0
My questin is when i clicking the button. It show popup message like
"Do you want to close this window " I don't want this popup.
without popup i need to close this window? How to do that?
Regards,
Manivannan P

Hi Manivannan p,
1.Create a Button called Close.
2.Create an action for this button.
3. In the event handler for this button, write the following code
You can try this
public void onActionClose(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionClose(ServerEvent)
WDPortalEventing.fire("urn:com.sapportals:navigation", "CloseWindow", "");
//@@end
This will help you closing the window with out Popup
Here we are calling a "Portal Event" called " CloseWindow" to close the windoe
Get back if you have any questions
Thanks & Regards
Swetha

Why do I get a popup message in multiple languages requiring a shutdown and restart

Why do I keep getting a popup message in multiple languages requiring a shutdown and restart? Has been going on for a few months. Because of the shutdown reports have been sent to Apple upon restart.

After it restarted, did you see a dialog box resembling this one:
If so, next time it occurs click Report...
Before you send it to Apple, copy the text of the report. Paste it in a reply. Remove or obscure any personal information, should it appear.
If problems continues to occur please determine if they also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

Strange error message when I tried to use the "collaborate" function under "File"

Has anyone else met this before? : I am trying to share my project with my team members. Tried File -> Collaborate and then try three options under it. Non e of them works. It asks for your Adobe ID in order to sign in and upload. However, every time I typed in my Adobe ID and password, it gave me strange error messages. The first time it says: User has not verified email address yet. I have been using this Adobe ID since 2008 or 2009 and of course I have verified my email address. But to make sure, I went back to my email box and search for emails about Adobe ID verification but I didn't find any (I never delete emails such as this).
Then I tried to register a new Adobe ID. This time when I tried to singn in with the new Adobe ID, it will either say "Network may not be available" (which is not true because I am able to surf on the Internet at the same time), or it says "User has not accepted user condition/agreement".
I feel so frustrated because I feel this is definitely not my mistake which caused the failure of log in.
Hope someone can tell me what the reason is and how to fix it though.
Thanks a lot.

Hi Lilybiri,
Thanks for your quick response. I followed your suggestion and verified my Adobe ID on acrobat.com.
Now I can enter the collaborate function. However, everytime when I tried to send it to myself (for test purpose) I got another error message "You need to enter a valid emaill address". I saw someone else on this forum has met the same problem. Do you have any suggestion on what is the possible reason for this to happen?
Again, thanks for the fast response. You have been helping me and other ppl so much.

How to display a popup message in query (through process chain)

Hi Gurus,
I need your help.
I have an input query that triggers an event (through a button) and runs a process chain.
I would like to show a popup message to inform the user when the process chain is over.
Using function modules I've been able to show popup messages in the workbench, but I want to display this message directly in Bex Analyzer 7.0.
Thanks
Gabbo

Hi,
I'm also looking for a solution to display a custom message in the Bex Analyser at logon.
Using function module in the logon user-exit works but only when loggin to the workbench.
I don't want to use SM02 (which works in both cases) because I need to display a variable message depending on the user.
If someone has an idea, I'll really appreciate.
Best regards and happy New Year to all of you.

Error Message Displaying the status Bar not like popup message

Hi all,
My Requirement is while creating invoice if pricing conditons is repeted , system should thorough the error message like (uplicate Condition Types Are Not Possible in the status Bar but Im getting poup Error message So I want to display the same message in the status Bar.
Please Help me any one.
Regards,
Prathap

I dont want to Display the popup, I want to Display in Status Bar as a Error Message.
Like this .
If I put message type 'E' its Displaying popup message , MESSAGE ' Duplicate Condition Types Are Not Possible.' TYPE 'E'.
If I Put messge type 'I' its Displaying in Status Bar .
Regards,
Prathap
Edited by: giri prathap on Sep 13, 2011 12:35 PM

How to add Popup message as soon as user logins to portal system?

Hi,
I want to display a popup message as soon as user logs on to the portal system.
Regards,
Anagha

Anagha Bhat wrote:
what do you mean by "iView with the popup as the entry point" ?
I think this means, iView's 'Launch in new window' property should be accordingly set..

To display a popup message alongwith ALV grid

Hi Experts,
I have a requirement where I need to display data using ALV Grid. Also, in case there are any errors encountered during the data extraction I need to inform the user about it by using either a popup message or a status message stating that he needs to check the error log. To display the error log I have provided a push button which will take the user to another screen where he can see all the errors encountered.
Can anyone please let me know as to how to accomplish the task of displaying a status message alongwith a ALV grid display?
Looking forward to your reply.
-Warm regards,
Prajakta K.

use exception handling and pop up.........
try following in grid..
*--Exception handling
ENDIF .
ENDIF .
WHEN 'EU' .
READ TABLE gt_list INDEX ls_selected_row-row_id .
IF sy-subrc = 0 .
CALL FUNCTION 'ZPOPUP_CONV_CURR_AND_DISPLAY'
EXPORTING monun = 'EU'
quant = gt_list-paymentsum.
ENDIF .
ENDCASE .
ENDFORM .

Screen freezes and popup message says I need to do a shutdown and then restart. It does it sometimes 2 times a day. Im new to apple and need help.

My screen freezes and popup message says I need to do a shutdown and then restart. It does it sometimes 2 times a day. Im new to apple and need help.

Bad or incompatible RAM is, more often then not, the cause of most Kernel Panics. It could also just need to be reset.
Here's the most used site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
Here is a great MacFixIt article.
 Good Luck!
DALE

Popup message for down payment

hi,
regarding down payment, system will show the popup message while entering FB60 and MIRO, the same popup message is it possible to shown while doing F-53 & f-58 to vendor.
govind.

Hi
Commitments warnings: Is the check box available in the Special G/L indicator config screen. If you select that check box then only the warning message apprears. Below given the help for the same -
Indicator: Send Warning Message if Balance Exists ?
Has the effect of sending a warning message if you post to an account for which a balance exists for the special G/L indicator.
Message popouts at the time of invoicing and no possiblity at the time of payment. But, the system will take if you are making payments using the APP, that depends on the config.
VVR

Very strange Popup - can't get rid of it

I've been getting a very strange popup lately when I go to certain sites and I can't get rid of it. It's an advertising thing that thinks for some reason that I live in Oakland (which i don't but is nearby). I also noticed that on certain websites now autofill puts in Oakland and some sites say i am logging in from Oakland.
The popup looks like an XP window but is messed up and the text hangs over the edge of the box. It bounces around in the middle of my screen and makes accessing anything under it impossible.
I have cleared cookies, cache and history. I have pop block on. This happens in Safari and in Firefox. I can send a screen shot but can't seem to paste one here.
If I have accidentally gotten some adware installed, how can I find and get rid of it???
Any help would be hugely appreciated!
Thanks,
Ed

Thanks for the quick response. I pretty much always get it at this site:
http://www.alluc.org/alluc/tv-shows.html?action=getviewcategory&category_uid=822
A friend just tried the site too and said he gets the same popup but with an advert for Seattle (where he does live), so perhaps this isn't something installed on my computer after all... it is super annoying, though, so i'll give that program a try. do you have any other thoughts?

I have Adobe Acrobat version 11.0.0 installed with Adobe CC. I cannot download PDFs from the internet (in this case from PubMed National Library of Medicine). If I try to do this I get a popup message saying that "ADOBE ACROBAT NPAPI PLUG-IN, VERSION 1

I have Adobe Acrobat version 11.0.0 installed with Adobe CC. I cannot download PDFs from the internet (in this case from PubMed National Library of Medicine). If I try to do this I get a popup message saying that "ADOBE ACROBAT NPAPI PLUG-IN, VERSION 11.0.0 NEEDS YOUR PERMISSION TO RUN. I DON'T KNOW HOW TO GIVE THIS PERMISSION OR WHAT TO DO. CAN YOU PLEASE HELP?

What buttons do you get to click on with this message? What browser are you using (e.g. Safari, Chrome, Internet Explorer...)

Simple problem with popup message before adding document on system form

Hi all,
We have an AddOn that validates price lines on system Sales Order form matrix, so that if prices fall below a certain value, a popup is show to ask to continue or not, when user presses ADD button.
The problem is that if he chooses yes (to continue), the Sales Order is not added since the button ADD keeps being selected ....
Here is my code:
        [B1Listener(BoEventTypes.et_CLICK, true)]
        public virtual bool OnBeforeClick(ItemEvent pVal)
            int iResult = B1Connections.theAppl.MessageBox("Price lines fall bellow minimum! Continue?", 1, "NO", "YES", "");
            if (iResult == 1) // NO
                // Show error
                B1Connections.theAppl.StatusBar.SetText("OK", SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error);
                return false;
            // YES: Continue to add Sales Order
            return true;
The problem is somehow related with the popup message being shown: if user says YES to continue, the system form does not continue with the standard process of adding the Sales Order (when I move the cursor above the ADD button is shows it already pressed...).
Do I have to do anything more to force the process to continue, when the user says YES?
Regards,
Manuel Dias

Thtas known problem. The solution for this is declare global variable as boolean, when user selects Yes, then set this variable to true and emulate click to add button again where before the message box check if its varaible sets to true - in this case dont show message box, only set variable to false.
The concept of code will be
dim continue as boolean = false
in item event
if continue = false then
    x = messagebox...
if x = 1 then
    continue = true
     items.item("1").click
end if
else
continue = false
end if

Strange popup message

Similar Messages

Maybe you are looking for