Strange PPPOE internet behavior
I recently set up a 2611 router to initiate my PPPOE connection to ATT
DSL. I was able to get the PPPOE to connect and everything seemed to
be working how ever after a few days I started to notice that certain
websites were not coming up. My setup consistes of a 2611 router that
is connecting to the internet, internally this router connects to a
2621 router on a 10.1.2.X network which is also acting as a router on
a stick for vlans that i have setup on a 2924 switch in a 192.168.X.X
network. The problem did not seem to be VLAN specific as at least one
PC on each VLAN could get to the sites that were having issues. The
sites that I noticed that were having issues were Windows Update
(would display a "no network connection" error after searching for
updates), Craigs list ( would go to a page can not be displayed when
trying to post adds) Yahoo groups ( could sign on to groups but once
signed on all links would go to a page can not be displayed error)
Credit card sites ( could sign in but all links once signed in would
go to page can not be displayed). I tried troubleshooting this on the
Windows end first by engaging Microsoft support, but we were able to
determine that there was an issue with the network as once I replaced
the 2611 with the linksys that I was using previously everything
worked. Before taking the 2611 down I was able to do a packet sniff
with Ethereal of a succesfull and failed windows update, the only
glaring issue that i saw was that on the failed windows update I was
getting alot of check sum errors which after researching looked like
they were coming from the Gig NIC. Below is the config that I was
using on the 2611, any insite or thoughts on this strange issue would
be appriciated.
2611 Config
=========================
Using 3078 out of 29688 bytes
version 12.3
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname crossbonesEdge
boot-start-marker
boot-end-marker
no aaa new-model
ip subnet-zero
no ip source-route
no ip domain lookup
no ip bootp server
ip cef
vpdn enable
vpdn-group 1
request-dialin
protocol pppoe
interface Ethernet0/0
description Connection to Internet
no ip address
no ip redirects
no ip unreachables
full-duplex
pppoe enable
pppoe-client dial-pool-number 1
interface Ethernet0/1
description Connection to Crossbones
ip address 10.1.2.253 255.255.255.0
no ip redirects
no ip unreachables
ip nat inside
full-duplex
interface Dialer1
ip address negotiated
ip mtu 1492
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname [email protected]
ppp chap password 7 XXXXXXXXXX
ppp pap sent-username [email protected] password 7 XXXXXXXXX
router eigrp 100
network 10.1.2.0 0.0.0.255
auto-summary
ip nat inside source list 1 interface Dialer1 overload
ip nat inside source static tcp 192.168.7.10 1495 interface Dialer1
1495
ip nat inside source static tcp 192.168.7.15 3389 interface Dialer1
3389
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
logging 192.168.7.16
access-list 1 permit 10.1.2.0 0.0.0.255
access-list 1 permit 192.168.0.0 0.0.255.255
dialer-list 1 protocol ip permit
no cdp run
snmp-server community public RO
line con 0
exec-timeout 15 0
password XXXXXXXXXXXX
logging synchronous
login
length 22
history size 30
line aux 0
exec-timeout 5 0
login
length 22
transport output none
line vty 0 4
exec-timeout 20 30
password XXXXXXXXXXXX
login
length 22
history size 30
end
hi, on eth 0/1
ip tcp adjust-mss 1452
or
ip adjust-mss 1452
if you cannot enter any of the two option, upgrade ios.
Similar Messages
-
Strange Navigation Bar Behavior
Hi, I'm currently designing a web page for non-profit
government organization.
Unfortunately, I'm running into some strange behavioral
problems with the navigation bar.
The tabs in my navigation bar run from left to right. As the
links are visited through the navigation bar, the links to the left
of which ever link is active stop working. I can't for the life of
me figure out why!
The pages are arranged in such a way that each page involves
three html files. One body file, one navigation bar file with it's
respective tab hilighted, and a little file that simply loads the
two, one on top of the other. The tabs in the navigation bar are
linked to the file that then loads the body and navigation(of
course). Clicking on a tab to the right of the active tab loads
everything perfectly. However, if the active tab is the right-most
tab, the tabs to the left no longer work properly. They seem to
reload the navigation bar, but the body gets left behind and the
URL still appears to be that of the right-most tab.
Here is an example of my site in progress:
Site in
Progress
By going through the four tabs at the top, you can quickly
see things are going wrong.
The drop-down menu can be used to access the same pages that
the navigation bar refuses to load.
If you could please take a look at the site and reply with
any comments or suggestions as to what might be going wrong or what
I could do to fix it, I would be very grateful.
Note that I previously read something about strange
navigation bar behavior being caused by image names beginning with
numbers. This isn't what's happening here as my image names are all
"image 1" etc.
Also note that I'm using dreamweaver8
Thank you in advance for your help.
- Paul M
- Transitions for Youth
- [email protected]Well thanks for the suggestion, but that's not actually the
problem I'm having.
The newsletter link along with all that other stuff on the
left hand side is just stuff I havn't gotten to yet.
The problem I'm having is with the navigation tabs at the TOP
of the page(policies, forms, info and M.R.)! I know the links for
those tabs are correct, because I can see from hovering over the
tabs that they're pointing in the right direction, and if it's the
policies page(leftmost tab at the top) I'm on, all the tabs to the
right work perfectly. The problem is that when I'm on any other
page (such as the M.R. page which is the rightmost tab), all the
tabs to the left of it mysteriously stop working!
As I said, just quickly click back and forth through the four
tabs at the top of the page and you'll see what the problem is. In
fact, completely ignore everything that isn't those four tabs at
the top of the page, because everything else is unfinished.
Please help! Thanks! -
When will iPhone support PPPoE internet connections?
When will iPhone support PPPoE internet connections? Numerous Internet providers still use PPPoE internet over DHCP data. However, iphone does not support PPPoE.
PPPoE is irrelevant to the iPhone; it is a protocol between the ISP and the first point of presence on premises, which today is almost always a wired or wireless router. PPPoE would only be meaningful if there was a way to connect the phone directly to the incoming Internet connection. As there is no way to do this physically it would be pointless.
-
Strange internet behavior in Lion 10.7.2
After updating to Lion 10.7.2 something very strange started happening. While using Safari the internet bogs down at random (the connection still works) it just doesn't load pages at all for a moment and then continues like nothing happened afterwards until next bogdown. The strange thing is that if I while the internet doesn't work connect my iPhone 4 to the same WiFi as the mac is connected to the connection speeds up again and continues to work.
I don't know if it is some very strange bug or could it be the router that has problem with handling some iCloud syncing that the mac does to check for new "things" or something like that?Greetings,
You need version 1.3 of Growl, according to some other poster. I didn't know people still used it - it has always been a pain, and caused some of the most troublesome performance issues on a Mac using any version of OS X.
It's dis-allowed at my site that has Macs, for several hundred users - too many, random, headaches. I know the techs don't put it on any of the machines at the college where my day job is, and the machines are locked down........
Cheers,
M. -
Strange Internet behavior??
I have been able to surf any site on the internet freely until the last couple of days, now in Safari when I try to access certain sites (including apple!!!) it will just sit there until it times out, but other sites (like the Unofficial Apple Weblog) work just fine, also I've noticed that iTunes will also time out trying to access the iTunes Store. I've checked my networked settings 2 times and everything seems to be fine.
I've also reset them once or twice, so I do not believe it is my network that is the problem. What could be causing this to happen? I'm running the latest iTunes and OSX, and I'm on a wireless network routed by a linksys W54TG( I think thats what it is called). Thank you in advance for your help. I'm not at my computer as of right now (which is why I can access this site hehe), so if you need me to try anything I won't be able to try until 8:00 PM. Thank you again.Hi. You can try using another browser to see if it behaves the same way as Safari does. But you also said you were having trouble with iTunes so it may not be browser related.
Many times problems such as yours are related to the ISP. Especially if everything has been working fine and then connectivity problems develop. Frequently, their tech support will not own up to problems or they may not even be aware of some of them.
Just a couple of ideas. How's it working now?
Regards,
Steve M. -
Safari 5.1 strange auto-reloading behavior for tabs in the background
hi guys.
I have been encountering this strange behavior recently. I had thought it could be something wrong with my system, until yesterday i upgraded my Safari for Windows to the v.5.1 on a Windows XP laptop, and found the same issue. Now i guess I can be quite certain this is a safari issue.
System info:
1. Macbook Pro 17", OSX 10.6.8, 64bit boot (i have 8GB RAM).
2. Safari (Mac) is the lastest version (as updated by the Auto update), run in the default 64bit mode.
3. The windows machine is an old Thinkpad T60 with Windows XP Pro SP3. The Safari for windows is Safari 5.1 (7534.50), also updated by auto update.
4. I have not installed any Safari extensions/plugs that feature an auto-reloading -- as such behavior was never seen before i upgrade to Safari 5.1
Since i mostly work on mac the mac has been kept most updated. But the windows machine which i use now and then, i don't update everything very frequently. And the earlier Safari 5.0 worked fine without the current issue.
Symptoms
1. Let's say I have 1 Safari window open with 5 tabs, and I have been working on the 4th tab for a while, and left the other 4 tabs "idling" in the background.
2. And then i want to switch to another tab: click on that tab, and that tab will come to the foreground while being automatically refreshed.
3. It looks to me this behavior happens after the inactive tabs have been idling longer than a certain period of time - then if you switch to them, they will be switched to and in the same time auto-reloaded. But I still don't know how long it needs for the "idling" before an auto-reloading "threshold" is triggered.
4. In the beginning this was just on the Mac Safari (and i hadn't updated safari on the windows). But after I updated safari for WIN yesterday, i found the same behavior today.
5. I checked all the Preferences settings and didnt find any option that indicates this behaviors.
Guys. any ideas? anyone have the same trouble? Thanks a lot guys. This is really annoying.Carolyn Samit wrote:
I'm running Safari 5.1 / SL v10.6.8 on one Mac with Glims installed and I never have a problem with tabs auto reloading. You might want to give it a try.
It's free!
http://www.machangout.com/
Once the software is installed you can access the settings from Safari / Preferences - Glims.
If you don't like the software you can use their uninstaller here.
Hi Carolyn thanks a lot for the idea.
The weird thing is... after i tried to uninstall and re-install a few apps the "auto-loading" behavior disappeared ... guess something was interfereing with safari 5.1...
But thanks for recommending Glims. I took a quick look at the website and it looks great. will do some more research before i start using it. Thanks for the recomm! -
Very strange FF3/Opera behavior
Hi there,
I'm running XFCE & Compiz Fusion and encountered a very strange behavior when visiting a certain website with Firefox3. The website is http://www.cyberpunk-terminal.de/. Whenever I visit that site my whole Firefox gets transparent. When I switch to a different tab or close the tab, it's back to normal. It seems to have something to do with Compiz, since I can set the transparency of FF to 0 via Compiz-shortcuts.
Does anybody else have the same experience?
Edit: Same thing happens with Opera.
Last edited by Pavel Jackoff (2008-08-06 20:31:36)Something new just happen. I have a big X in the battery icon.
"No batteries available" -
Strange Gradient Stroke Behavior on Some Path Corners
Hello All,
I'm a Photoshop user who has recently started learning Illustrator for a project. I am experiencing a strange behavior where some of the corners of a path with a gradient stroke overlap. In some of the corners, the stroke does not bend cleanly but leaves a strange artifact on the path (the stroke acts normally on the rest of the path including similarly angled corners). I am including pictures to illustrate what I mean.
The stroke I am using has a linear gradient applied across it. The stroke starts with a solid color (black) with a hard edge against a gradient from green to transparent. Sometimes the artifact is on the transparent side of the stroke (first image), but sometimes it's on the hard edge side (2nd image - this is actually the same corner with the anchors manipulated). In the third image, you can see the issue on both the "transparent" edge (though as you can see in this image, it isn't actually transparent in places where the stroke overlaps itself) and the solid edge.
I've done a lot of digging to try to find similar issues and tried many solutions - toggled snap to grid for the object, looked into miter limits, caps, and corners (I am using rounded corners), checked for stray anchors, changed points from corner to rounded, etc. Any advice is appreciated!
Thank you very much for your time and input!
Best,
AlexisBut you can get that effect by layering several stroke attributes in the Appearance Panel. For example, make the black on a different stroke layer, where you can control it separately from the green (ok, I'm color blind).
-
Strange alpha channel behavior in jscroll pane
Hi,
My first post here.
I have been strugling for a while with a problem with alpha channel opacity and scrollpane. I basically have a JScrollpane that contains a JPanel with JLabels. The JLabels have a mouse action that changes their background to higlighted by using a color with an alpha channel.
When a mouse is over a JLabel we call:
public void mouseOver(){
this.setForeground(Color.WHITE);
this.setBackground(new Color(100,100,100,100));
this.setOpaque(true);
This works but with some strange rendering problems. Sometimes the "background" shows other parts of the screen insted of the correct background. This is kind of hard to explain so I took a screen shot that elaborates this.
The correct behavior:
http://www.rulli.org/~mravimo/seka/correct.jpg
The wrong bahavior:
http://www.rulli.org/~mravimo/seka/wrong.jpgI think there seems to some abuse of the 'opaque' setting in Java. Opaque, literally, of course, describes something through which nothing can be seen (if you can see through it, it's either translucent or transparent). That means alpha 0 is transparent, alpha 255 (for an 8-bit channel) is opaque, and anything else is translucent.
ComponentUI uses 'opaque' to determine whether to paint the component background. This is where the semantics are broken: it should really query the background color to see if it's non-null and its alpha is non-zero, thus painting translucent colors as well as opaque. I think there is a good case for this being a Java bug if it's not already - though I'd anticipate the counter-argument being that it will raise issues with backward-compatibility ("if it's been broken long enough, don't fix it").
The problem you're seeing, I suspect, is due to the same flag being used (semantically correctly) to help optimise the paint process (if something really is opaque then there's no point rendering underneath it).
Unfortunately, fixing ComponentUI is a non starter since it can only be fixed by extension (multiply the number of components by the number of L&Fs and you're on your way).
As a workaround you can extend JLabel and override paintComponent(); or plug in a specific label UI which fixed the ComponentUI problem; in both cases leaving the opaque setting at false. -
Strange behavior I hope someone can help diagnose: After sending an email with an attachment, it will appear as though no attachment is present (looking down the attachment column in the sent box). After opening up the email, the attachment icon appears as it should. Is there any way to remedy this behavior without opening every single sent email by hand?
First try using Rebuild on the Sent mailbox -- if more than one account, then you must reveal the separate Sent mailboxes for each account, before Rebuild will be functional. Click on Mailbox in the menubar, and choose Rebuild while the Sent mailbox is open.
Ernie -
Strange Solaris 8 behavior and warnings in messages log
Hello,
Solaris 8 4/01 has strange behavior on Ultra 10. After an aleator period after log in, without running an application, window controls dissapear and the machine hangs up.
here are a few lines from messages log:
Aug 20 11:53:54 paris su: [ID 105066 kern.notice] NOTICE: su1: silo overflow
Aug 20 11:53:54 paris
Aug 20 11:53:54 paris su: [ID 643653 kern.notice] NOTICE: su1: ring buffer overflow
Aug 20 11:53:54 paris
Aug 20 11:55:55 paris su: [ID 643653 kern.notice] NOTICE: su1: ring buffer overflow
Aug 20 17:27:32 paris unix: [ID 839527 kern.notice] sched:
Aug 20 17:27:33 paris unix: [ID 294280 kern.notice] software trap 0x7f
Aug 20 17:27:34 paris unix: [ID 101969 kern.notice] pid=0, pc=0xf0050e14, sp=0x2a10001b2e1, tstate=0x8800001401, context=0x0
Aug 20 17:27:36 paris unix: [ID 743441 kern.notice] g1-g7: 10037c7c, 2, 1, 7, 0, 0, 2a10001fd40
Aug 20 17:27:37 paris unix: [ID 100000 kern.notice]
Aug 20 17:27:38 paris genunix: [ID 723222 kern.notice] 000000001040c110 unix:sync_handler+150 (1041a970, 10400000, 0, 0, 0, 0)
Aug 20 17:27:40 paris genunix: [ID 179002 kern.notice] %l0-3: 0000000000001602 0000000000000016 000000000000000e 0000000010009e90
Aug 20 17:27:40 paris %l4-7: 0000000000000000 0000000000000000 000000000000000c 000000001040c140
Aug 20 17:27:45 paris genunix: [ID 723222 kern.notice] 000000001040c1e0 unix:prom_rtt+0 (10000000, 16, f0000000, 1041b130, 3000005f548, 0)
Aug 20 17:27:48 paris genunix: [ID 179002 kern.notice] %l0-3: 0000000000000002 0000000000001400 0000008800001401 0000000010026e4c
Aug 20 17:27:48 paris %l4-7: 00000000f0050dc0 00000000f00676a8 000000000000000c 000000001040c290
Aug 20 17:27:52 paris genunix: [ID 723222 kern.notice] 000000001040c330 unix:client_handler+2c (f0067138, 2a10001bc48, 20, 10428288, 1, 1041a970)
Aug 20 17:27:55 paris genunix: [ID 179002 kern.notice] %l0-3: 000000001041a788 0000000000000000 000000001040e400 0000000000000001
Aug 20 17:27:55 paris %l4-7: 0000000000000016 000000000000000e 0000000000000016 000000000023f0e0
Aug 20 17:28:00 paris genunix: [ID 723222 kern.notice] 000002a10001bb90 unix:prom_enter_mon+28 (0, c, b, 300001b7000, 0, 1013c6b4)
Aug 20 17:28:02 paris genunix: [ID 179002 kern.notice] %l0-3: 0000000010026ad4 0000000000000016 0000000000000009 0000000010009c78
Aug 20 17:28:02 paris %l4-7: 000000001041b130 0000000000000016 0000000000000001 000002a10007d7f0
Aug 20 17:28:07 paris genunix: [ID 723222 kern.notice] 000002a10001bc60 unix:debug_enter+d0 (0, 30000fdf910, 0, 10, 0, 3000006a098)
Aug 20 17:28:09 paris genunix: [ID 179002 kern.notice] %l0-3: 000003000002da00 0000030000f70000 0000000000000000 00000300016943f0
Aug 20 17:28:09 paris %l4-7: 0000000000000000 00000300016943e0 00000300007a1f28 0000000000000000
Aug 20 17:28:13 paris genunix: [ID 723222 kern.notice] 000002a10001bd30 su:async_rxint+218 (30000fdf910, 3000107a088, 1000, ff, 0, 2000)
Aug 20 17:28:16 paris genunix: [ID 179002 kern.notice] %l0-3: 000000001013c6b4 000003000107a089 000003000105a086 0000000000000001
Aug 20 17:28:16 paris %l4-7: 0000030000fdf910 00000000000000f6 000003000105a000 0000000000006000
Aug 20 17:28:21 paris genunix: [ID 723222 kern.notice] 000002a10001bde0 su:asyintr+134 (6, 30000fdf910, 6, 10441de0, 10072068, 300001b7000)
Aug 20 17:28:24 paris genunix: [ID 179002 kern.notice] %l0-3: 0000000000000000 00000000001298dd 0000000000000000 000003000006a088
Aug 20 17:28:24 paris %l4-7: 00000300000578c8 000003000078fea8 0000000000000000 000003000078fed0
Aug 20 17:28:28 paris genunix: [ID 723222 kern.notice] 000002a10001be90 pcipsy:pci_intr_wrapper+64 (1047e2d8, 7e9, 1, 30000074148, 30000063208, 300001303c8)
Aug 20 17:28:32 paris genunix: [ID 179002 kern.notice] %l0-3: 000000001026fca4 0000000000000000 0000000000000000 0000030000073c28
Aug 20 17:28:32 paris %l4-7: 000000001158ff20 0000000000000000 0000000000000000 0000000000000000
Aug 20 17:28:36 paris genunix: [ID 723222 kern.notice] 000002a10001bf50 unix:current_thread+44 (2a10001fd40, 1041b130, 300011de010, 10423840, 16, 0)
Aug 20 17:28:39 paris genunix: [ID 179002 kern.notice] %l0-3: 0000000010007450 000002a10001f151 000000000000000c 000002a10001bf50
Aug 20 17:28:39 paris %l4-7: 0000000000000000 0000000000000000 0000000000000000 000002a10001fa00
Aug 20 17:28:44 paris genunix: [ID 723222 kern.notice] 000002a10001faa0 unix:idle+54 (1040f850, 0, 0, 1041b130, 3000005f548, 0)
Aug 20 17:28:46 paris genunix: [ID 179002 kern.notice] %l0-3: 00000000100416c4 0000000000000000 0000000000000000 000002a1000b7d40
Aug 20 17:28:46 paris %l4-7: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
Aug 20 17:28:51 paris unix: [ID 100000 kern.notice]
Aug 20 17:28:51 paris genunix: [ID 672855 kern.notice] syncing file systems...
Aug 20 17:29:04 paris genunix: [ID 433738 kern.notice] [2]
Aug 20 17:29:04 paris genunix: [ID 733762 kern.notice] 12
Aug 20 17:30:47 paris genunix: [ID 433738 kern.notice] [2]
Aug 20 17:37:27 paris last message repeated 9 times
Aug 20 17:37:29 paris genunix: [ID 616637 kern.notice] cannot sync -- giving up
Aug 20 17:37:30 paris genunix: [ID 353387 kern.notice] dumping to /dev/dsk/c0t0d0s1, offset 214827008
Aug 20 17:37:38 paris genunix: [ID 409368 kern.notice] 100% done: 10582 pages dumped, compression ratio 3.80,
Aug 20 17:37:38 paris genunix: [ID 851671 kern.notice] dump succeeded
Any ideea what is wrong with my machine ?
Thank you,
RazvanHi Chandra,
unfortunately I can't stop the whole database just because of this "little" problem. And don't even know if it really helps. Now I'm installing the same SW on VMWare server. Hope, that it will help me reproduce this problem and then I can try this patch.
Thank you, however, for your suggestion.
Robert -
Strange select statement behavior in start routine during extraction
Hi, All..
I'm receiving some odd behavior from a select statment being processed in batch mode (specifically, when run in a normal BW extractor - start routine), the select yields no results .. sy-subrc = 4 and target itab is empty. however, when i run this same select statement in debug, i get sy-subrc = 0 and records are returned!! I tried putting the select statement in a standard abap program & it came back successfully in both foreground & background. something is strange when run in the BW extractor process?? anyone familiar with this?? any help is appreciated!! Thanks!!Thanks everyone for the comments!
The code is in the start routine from 0BBP_CONF_TD_1 into 0BBP_CON.
-The select returns records when in debug
-I've tried running it open without the "for all entries" & it still fails in batch
-The select works during the delta but always fails on the initial load
The select is a join:
DATA: BEGIN of t_JOIN1 OCCURS 0,
CONNUM LIKE /BI0/ABBP_CON00-BBP_CON_ID,
CONITEM LIKE /BI0/ABBP_CON00-BBP_COITEM,
PONUM LIKE /BI0/ABBP_PO00-BBP_PO_ID,
POITEM LIKE /BI0/ABBP_PO00-BBP_POITEM,
ACGUID LIKE /BI0/ABBP_PO00-BBP_ACGUID,
SCNUM LIKE /BI0/ABBP_SC00-BBP_SC_ID,
SCITEM LIKE /BI0/ABBP_SC00-BBP_SCITEM,
REQSTR LIKE /BI0/ABBP_SC00-BBP_REQSTR.
DATA: END of t_JOIN1.
SELECT a~BBP_CON_ID
a~BBP_COITEM
a~BBP_PO_ID
a~BBP_POITEM
b~BBP_ACGUID
c~BBP_SC_ID
c~BBP_SCITEM
c~BBP_REQSTR
INTO TABLE t_JOIN1
FROM /BI0/ABBP_CON00 as a
INNER JOIN /BI0/ABBP_PO00 as b
ON aBBP_PO_ID = bBBP_PO_ID AND
aBBP_POITEM = bBBP_POITEM
INNER JOIN /BI0/ABBP_SC00 as c
ON bBBP_SC_ID = cBBP_SC_ID
AND bBBP_SCITEM = cBBP_SCITEM
FOR ALL ENTRIES IN DATA_PACKAGE
WHERE a~BBP_CON_ID = DATA_PACKAGE-BBP_CON_ID AND
a~BBP_COITEM = DATA_PACKAGE-BBP_COITEM AND
a~BBP_COITEM <> 0 AND
b~BBP_ACGUID <> '0000' AND
c~BBP_SCITEM <> 0. -
Hello all,
Hopefully I can type this fast before the internet gives out again.
Here is my problem: On my Mac, my wireless internet will go out periodically. It does not just boot me off of the network, it is entirely incapable of detecting any networks (when there should be 4 or 5 that it usually detects and that other devices are able to see). If I restart my computer the internet is *sometimes* able to come back, sometimes not. The same goes for turning the computer entirely off and then back on again. The time range that I am able to use the internet has varied from as little as 2 minutes to as great as 3 hours, but it always eventually disconnects (as well as becomes incapacitated from even detecting the networks). I am using a shared college-wide internet connection in an on-campus apartment, so I have no authority or control over the router. If it was a router problem I would merely begrudgingly wait for those to be resolved by the tech guys on campus and go a couple days without the internet, but I have reasons to believe it is not. Those reasons are the following:
- Other devices are able to detect the network and connect to it.
- The computer exhibits the same problem with different wireless connections that it had previously recognized off campus (tested at a friends house).
- The menus exhibit sporadic behavior after the disconnection. For example, the wireless icon at the top right will tell me that the wireless is on, but the 'Systems Preference' menu will tell me that it is off, and sometimes vice versa. When I press "turn Wi-fi on" whenever the Wi-Fi is exhibited as being "off" by the System Preferences menu, the button is entirely ineffective and does nothing. The same goes for the "Turn Wi-Fi On" option in the icon's expansion menu. However, even when both the icon and the preferences menu agree that the wireless is "on" (which is probably just a coincidence when that happens), whenever I enter either "Assistant" or "Diagnostics", a menu pops up informing me that my wireless is, as a matter of fact, off!
As I was typing this, I had to save my response in a notepad because the wireless gave out again and have now had to login twice. Does anybody know what's going on? Is there anything else I should try to illucidate this problem?
Thanks in advance.Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 5
Reset the System Management Controller.
Step 6
Reset the PRAM.
Step 7
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
Step 8
Make a "Genius" appointment at an Apple Store, or go to another authorized service center. -
G'day Chaps,
Have just changed my internet connection from a wireless one to using PPPoE. The internet on my Mac is working fine, but now I cannot connect using Parallels Windows XP. It worked fine previously, and I don't remember having to make any setting changes at all (although my memory may have failed me).
So I have all of the settings that I am using on my Mac PPPoE, how do I plug that in to windows on Parallels to make it work?
Many thanks,
damo.turned out just to be an internet preference setting in Windows.
thanks for all your replies (ummm) -
Pppoe internet setup probs via ADSL
Hi I'm using Solaris 9 on X86 system with a NIC 3com 3C509C-TX-M.
I used the direction for pppoe setup from http://home.earthlink.net/~jaymzh666/solaris/spppoe.html
and it all seemed to do as per there instructions.
I'm able to get connected as shown on my file below taken from my terminal window: and showing my Point to Point is UP.
# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
# ifconfig elxo0 up
ifconfig: setifflags: SIOCGLIFFLAGS: elxo0: no such interface
# /usr/bin/pppd call MyBigpond
# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
sppp0: flags=10008d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST,IPv4> mtu 1492 index 2
inet 144.137.194.1 --> 172.31.28.24 netmask ffff0000
ether 0:0:0:0:0:0
# ifconfig elxl0 plumb
# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
sppp0: flags=10008d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST,IPv4> mtu 1492 index 2
inet 144.137.194.1 --> 172.31.28.24 netmask ffff0000
ether 0:0:0:0:0:0
elxl0: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 0.0.0.0 netmask 0
ether 0:4:75:da:34:72
# ifconfig elxl0 up
# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
sppp0: flags=10008d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST,IPv4> mtu 1492 index 2
inet 144.137.194.1 --> 172.31.28.24 netmask ffff0000
ether 0:0:0:0:0:0
elxl0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 0.0.0.0 netmask ff000000
ether 0:4:75:da:34:72
# ping www.sun.com
ping: unknown host www.sun.com
I end up with a dynamic IP of 144.137.194.1 in the particular session.
My problem is where to go to from here when I try to ping to check the connection I get "unknown host" So I'm a little lost. I can see that the connection has been made and my ISP has allocated an IP address. I've tried to use netscape and keeps telling it cant find any url's.
So I'm pretty sure I've missed a step somewhere. Anyone have any ideas of what I need to do to actually be able to surf the net or test the connection.
Thanks ShaneHi Lee,
Well checked the file and it's there and still can't connect to internet or ping even thought the connection is made and all NIC and PPPOE are up:
# /etc/nsswitch.files:
# An example file that could be copied over to /etc/nsswitch.conf; it
# does not use any naming service.
# "hosts:" and "services:" in this file are used only if the
# /etc/netconfig file has a "-" for nametoaddr_libs of "inet" transports.
passwd: files
group: files
hosts: files dns
ipnodes: files
networks: files
protocols: files
rpc: files
ethers: files
netmasks: files
bootparams: files
publickey: files
# At present there isn't a 'files' backend for netgroup; the system will
# figure it out pretty quickly, and won't use netgroups at all.
netgroup: files
automount: files
aliases: files
services: files
sendmailvars: files
printers: user files
auth_attr: files
prof_attr: files
project: files
and doing an ifconfig I get this
ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
# ifconfig elxl0 plumb
# ifconfig elxl0 up
# /usr/bin/pppd call MyBigpond
# Apr 25 12:06:48 Home sendmail[264]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name
Apr 25 12:06:48 Home sendmail[263]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name
# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
elxl0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 0.0.0.0 netmask ff000000
ether 0:4:75:da:34:72
sppp0: flags=10008d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST,IPv4> mtu 1492 index 3
inet 144.137.199.22 --> 172.31.28.24 netmask ffff0000
ether 0:0:0:0:0:0
# ping www.sun.com
ping: unknown host www.sun.com
# netstat -i
Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
lo0 8232 loopback localhost 450 0 450 0 0 0
elxl0 1500 0.0.0.0 0.0.0.0 57 0 58 0 0 0
sppp0 1492 172.31.28.24 144.137.199.22 55 0 56 0 0 0
So I'm not sure what I'm doing wrong all connections are up and dynamic IP is allocated. Any ideas on whats wrong ??
Shane
Maybe you are looking for
-
How to read Data of a Webi Report
Hello Friends, I have a task where I need to read data of a Webi Report, how can it be done? Basically I have a trigger report which runs every day and get the latest RACN number from the database. I am trying to get that RACN number from trigger rep
-
Non display of OPEN ITEM GL for MISGL in FAGLB03
For Open Item GL where shown balance RS.52 Lacs, But line item hown Zero amount of the same. have given proper Inputs in FAGLB03 like GL Account Number,Company Code, Fiscal Year and Ledger. can you please help me out on this.. Thanks and Regards, S
-
Manufacturing-admin still not working
Hi everyone! I had no problem in getting SQL Trace up and running on my local Netweaver instance. However now I'm stuck getting SQL Trace running on our test machine. I followed the instructions given in the respective documents as well as the ones g
-
UCCX 7.0(1) RmCm resource issue
I have an issue with our UCCX 7.0(1): In RmCm -> Resource configuration Just for one particular resource - the resource group changes from "Service Desk" to "Not selected" overnight and team changes from "Service Desk" to "Default". The next morning
-
Hi all, Is it possible to use the RSUM display function with level based measure. RSUM(LBM) in Answers. I tried to do so but the RSUM is never correct,so i'm wondering if I'm doing something wrong or the RSUM is not working correctly with level based