STRANGE PRINTER PROBLEMS

I am having some strange problems with my Deskjet F4480. I have never had a problem using this device before. All of my documents are stuck in queue and never print. They are not paused. There is no paper jam. My printer is on and all cords are securely plugged in. I tried printing a test page and it is stuck in queue also. I downloaded the troubleshooter from hp support and a test page DID print from there but nothing else will print! Note: One of my documents in queue says 676KB/832KB. WHAT IS GOING ON?! I have unplugged the machine and everything. NOTHING WORKS. Please advise!

Hey, just dealt with the same problem...I think it is finally solved!
Online people offered all sorts of suggestions about the activity monitor, printer queues, etc. Nothing worked. Then I remembered that when I updated to Snow Leopard, it warned me that ONE OF MY APPLICATIONS WAS INCOMPATIBLE.
I searched everywhere (e.g. application support, preferences) and deleted EVERY SINGLE SHRED of that application (Viruscan from McAfee), even the plist files. Finally, no more fan running hot for no good reason!
Hope you can remember which of your apps was incompatible, if not, you may want to delete non-essential applications you have downloaded. Good luck!

Similar Messages

Strange printing problem in PSE 9.0.2

I'm running Photoshop Elements 9.0.2 on MacOS 10.6.6.
Since I installed the 9.0.2 update to PSE, when I try to print from PSE, it only prints a 4x6" section in the center of the page. I'm thinking I may have flipped a setting somewhere, but I can't figure it out.
I know it's not the printer, because it does the same thing on my Samsung CLP-320 laser printer and my Canon MP 530 inkjet. It also does the same thing when I print to PDF. My workaround for now is to save the file in another format and print from another application.
Any ideas?
TIA,
Geneviève

I recommend you don’t use the print module in PSE if you have a credible alternative.
The Organizer and Editor use different print engines and both are poor.

Funny printing problem

I have a strange printing problem. I have set up airport extreme downstairs - for my laptop - and a relay (airport express) to reach upstairs (long way) for my wife's laptop. My wife's laptop (upstairs using the relay) will only print remotely if my own laptop is awake - it must be printing through my laptop rather than engaging Extreme on its own account. How can I fix this?

Sorry this is so late. I only solved the problem today. A number of things happened. Did the routine download update that came through for Airport and also uploaded new printer drivers. Then rebooted Aiport Extreme and all working fine.

Leopard printing problems on several printers (Am I the only one?)

Since installing Leopard shortly after it was released, I've had flakiness with printing:
- With Tiger, when I printed, I could open the printer's window, and see the print job queued. The job would finish, disappear from the window, and everything would be fine.
- When the job was printing, the printer icon would appear in the Dock. When the job was done, the icon would disappear from the Dock. Simple.
With Leopard, printing has worked, but I have never seen a print job appear in a PrinterProxy window. I print, the printer outputs the job, and PrinterProxy is always blank. The printer icon appears in the Dock, and stays there forever. I found that I could ctrl-click on the icon and select the Auto Quit option (Hooray!), but that only worked for a while. Then the icons started staying in the Dock again. When I click on the Dock, there is no more Auto Quit option... just the "Application Not Responding" message. I have to force quit Printer Proxy after every time I print.
What's stranger is how long it takes for the PrinterProxy app to start up. The icon in the Dock bounces for well over a minute. Sometimes, the job finishes printing before the app is launched. If I switch between apps using Cmd-Tab, I can select the PrinterProxy app, but it never actually displays; instead, I just revert to the current window.
This is true for every printer I use, and as a traveling consultant, I use several. It is true whether I am printing via Airport, or over a direct Internet or USB connection.
The printers that are permanently in my Printer List are:
Canon i9100
Brother MFC-8840
Epson Stylus Photo 220
HP LaserJet 1320N
HP LaserJet 8800
HP LaserJet 6570
HP Color LaserJet 5550
Adobe PDF 8.0
All of these have the same problems. What's worse is, when I have a printing problem, there is no way to diagnose it, since the print jobs never show up in the PrinterProxy.
I have reset my printing system many times. I have deleted and re-added my printers many times. I have downloaded drivers from the manufacturer's sites, and reinstalled Leopard's default drivers. Nothing makes a difference. Strangely, after updating to 10.5.2, the Auto Quit problem went away for awhile, then returned spontaneously.
At the thread below, I show some of my system and crash logs from a prior discussion. Someone was helping me with the problem, but after asking me to post my logs, he seems to have dropped off the thread.
http://discussions.apple.com/message.jspa?messageID=7013209#7013209
I can't believe this problem is endemic to Leopard. I know many people who seem to use Leopard without any problems at all. (They even print once in a while!) And yet, as a fairly advanced user, I can't believe I'm the only one having this problem! My system is pretty plain vanilla, with no weird mods, hacks or apps. Pretty much just straightforward creative and productivity apps. I use it daily for business, so I try to keep all wacky stuff off of it.
There must be a solution, short of doing a clean install. Can anyone help? Are there PrinterProxy-related files I can delete when I reset the Printer System that might help resolve this? Prefs?
Thanks,
David

I'm having exactly the same problem with a Lexmark C760.
When I inspect the Activity Monitor while opening the Printer Icon from the Dock (or press the Button "Open Print Queue" in the "Print & Fax" System Preferences), I can see the Printer Icon as "Printer Proxy (Not Responding)" marked in red in the processes list. The Dock icon bounces for quite a while, and after about 2 minutes, a Printer List actually appears under the PrinterProxy application and the process in Activity Monitor changes its name to "(null)" and its color to black.
Though there is no entry in the PrinterProxy list when I print something from another application while keeping the window open, I can select "Supply Levels" and the correct information appears, so it seems to be functional.
It also seems that there are several copies of the drivers remaining, as the application in the Dock is named "Lexmark C760 (4)", probably from my attempts to remove and reinstall the driver. Is there some interference with old installations of the drivers that still lurk somewhere, hidden in the depth of the many libraries? How can I get rid of the previously installed drivers for good?

Strange Printing Issue With New HP & Pages

Hello!
I have a very strange printing issue with a new HP printer. I have written pages documents heavy in Texts which are located within tables. The documents print fine on a Cannon and Epson printer and look great but when I print the document on my new HP Laserjet Pro 400 Colour M451nw some of the text on some rows come out of the printer looking like they are bold / slightly fuzzy. This only happens with some of the rows of text, not all of them. The font is the same in every row with the same format.
You can see this in the attached image. The first line (Thanks very much) has printed correctly but the subsequent lines look bold / slightly fuzzy.
After a lot of testing the only way I can resolve this is if I copy the content into a new pages document and only then it will print and look ok with the HP printer.
This must be a problem within my origional document. I would simply copy and paste everything into a new document however this would take a very, very long time (over 5 years of work producing teaching materials and over 100 documents and thousands of tables and formatting that cannot be copied and pasted).
Also, on other printers you can see the lines seperating each row of the table. These lines are not visible on the HP print outs, even when the table is copied into a new document.
Has anyone come accross an issue like this before? Is there a way I can fix this without creating a new document? Do I need to get a new another new printer (the 4th printer this week!)?
Any advise, wise words would be greatly apprechiated!
Thanks!

Sorry, Fruhulda. After 4 hours on the phone with Apple care they are taking this issue further themselves. It seems to be a problem with our pages document and the compatibility with certain drivers. We have still not gotton to the bottom of it and Apple are going to get back to me when they have an answer.
We also worked out that the issue only happens when you print via Ethrenet & USB. Printing via Wifi is ok and there are no quality issues.
Very Strange!

Strange shutdown problem

Hi,
Last night, I had a strange shutdown problem on my iMac G5 (revB, 20", 2.0 Gig), with 1 Gig RAM, running 10.4.4 with all updates. I had had the computer on most of the day, using it off and on. I shut it down, and left the room. When I came back about an hour later, the fans were running (not rapidly, just at the normal speed they run when the computer is running), but the screen was blank, and the "sleep" light was not on. The computer wouldn't respond to any moving the mouse or to keyboard input. I finally shut it down by holding the power button until the fans shut down. Upon restart, everything was normal, and after using it for a few minutes, I was able to shut it down normally. Has anyone else seen this sort of behavior, and is it normal ? Or am I about to have more problems.
Thanks in advance,
Dave Fritzinger
Honolulu, HI

Hi Dave,
By the sound of it your computer has "hung" during the shutdown process, but at a point in the process where the system's temperature control mechanisms were still operating (otherwise the fans would be running flat out). My guess in this case is that it was probably actually a finder crash.
Various things can prevent proper shutdown. Often USB or FW devices are to blame. USB adsl modems , some scanners and hubs and the occasional printer driver seem to be common causes. Software can be responsible too, though - background virus or drive checkers are probably the most common, but far from the only possible causes ( I seem to remember "SpringCleaning" causing this problem when people moved to Tiger 10.4.2 for example) .
New software or hardware are therefore the first things to look for.
If you haven't installed anything completely new then one possibility may be that something you are using is not compatible with the latest OS update, and needs an upgrade to a driver. Its also possible that this is a "one off" glitch caused by a temporary problem , but if it happens again I'd be taking careful note of anything that you were using in the previous session.
You might also want to use the Console (in Utilities folder) to look at your system and crash logs.
Cheers
Rod

Airport Extreme Printing Problem with HP Deskjet.

Hello ... I wonder if any helpful folks can assist me with my printing problem? I am using Tiger on a new Intel imac with a HP Deskjet 960C. This printer is listed as having the latest drivers included within Tiger and works perfectly when connected via USB so my problem I guess is not with the software....I have disconnected everything and plugged everything back together again. I also deleted the printer from the printer list within the Printer Setup Utility application.... The imac recognisies the printer and upon pressing the print button everything feels as though its just going to work. The blue barber shop scroll appears but the printer fails to kick into gear and I get the big red exclamation mark appearing in the status box .... I would really love to try and sort this annoying error ... Any ideas? Thanks. Book G4 Mac OS X (10.4.4)

Hello jds17. Welcome to the Apple Discussions!
Unfortunately, not all USB printers are compatible with AirPort base stations.
Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
o 802.11n AirPort Extreme Base Station (AEBSn)
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also, you may find the following Apple article helpful.

Strange wifi problem on a brand-new MacBook Pro

Hey there, I'm new here. Desperation has got the better of me, and I hope I can get some advice.
So, last sunday I bought a brand new 13" MacBookPro with 2.8g i7 processor and 10.7.2 OS (I can't update to 10.7.4 because System Update tells me the download has been tampered with or corrupted after I waited 2 hours for it to finish, but I'm trying a direct download from the website). Here's the exact product: http://www.amazon.com/Apple-MacBook-MD314LL-13-3-Inch-VERSION/dp/B005CWIZ4O/ref= sr_1_5?ie=UTF8&qid=1340301247&sr=8-5&keywords=macbook+pro+13
Everything is all perfect except for a strange wifi problem. Note that the wifi does not turn-on or off, it doesn't disconnect after 'sleep', it doesn't get less speed, it doesn't constantly leave a preferred connection (once I chose my home wifi it always connects to it no problem). The wifi bar is always full. What is wrong is that the internet is kinda 'glitchy'. The best metaphor I can think of is that it's like a car that has to be pushed down the road before the engine can start. Please, bear with me because this is kinda hard to explain and I'm not good at tech lingos.
One of the symptoms is browsing can get really slow and inconsistent, almost as if the wifi gets turned off in the middle of browsing. For example: if I look something up on Google and then open 5 new tabs, probably only 2 or 3 of those tabs will eventually load while the other two will not get past the long 'http:.......google.....etc etc' address and will eventually show one of those 'error loading page because there's no Internet connection' notice. This happens a lot. Sometimes I have to refresh/retry loading a page a couple of times before it finally loads, then usually everything will get back to normal and I will be able to open multiple tabs with no problem, but in a couple of minutes I would try to open another site and the problem will start again.
So I tried to see how it does with downloading using iGetter. Fortunately I also have a Macbook (white-plastic casing one) and my brother has an old 2006 MacbookPro so I can compare. With those two older Apples iGetter starts receiving data in less than 8 seconds after I click Start, while my brand-new Macbook Pro can take up to 15-20 seconds, sometimes it doesn't even start at all and I have to re-click the start button. But once the download actually starts (on my new MacBook Pro), it downloads like normal, it doesn't stop and the speed is also as good as I can get. Strange huh? Hence, like a car that has to be pushed before the engine starts.
I also tried 'speed testing' from a website with all 3 laptops. On my old MacBook and my brother's MacBook pro, once I click 'begin test' it takes only a couple of seconds of 'ping' before the download/upload speed measurements start, but with my new MacBook Pro (just like with iGetter) it takes up to almost a minute before the measurements start, sometimes it won't start at all and I have to re-start the test.
Well, thanks for reading. And hope you can help me shed some light into this. Because it is really preventing me from really enjoying my new MacBook Pro. And if this is most likely a hardware problem, I'd better get back to the store and try to get it replace or something while it's only been 5 days. *cheers*

Hey guys.. Thanks for the replies. Unfortunately, I bought the MacBook in Indonesia where there are no such thing as an AppleCare. The only option is to leave the Apple product to one of the 'Authorized Apple care centre' and have whoever do whatever to it without guarantee of success. As for returning it and getting a brand new one, I also don't know if there is such a deal here, but that's actually a good idea, will try to go to the store tomorrow. Although, I'm worried that the problem might be with OSX Lion or something and getting a new one won't help.
mark75090, I've tried resetting the router when I first noticed te problem, didn't work though. I've checked my new MacBook's wi-fi (option+click wifi bar) and it says 'PHY Mode: 802.11g', so does my MacBook and the old MacBook Pro. I don't know what those mean though, and I don't know whether or not my router is an N., can you tell me more please.. I have tried with the other two turned off, and only the new MacBook using the wi-fi but the problem persists. I have also tried connecting directly to the router, but as I described, the problem is too subtle for me to notice the difference.
Also, if I create a brand new Wi-Fi connection in network preferences and connect to my router through the new Wi-Fi profile, the problem seems to be gone for an hour or so, then it always comes back though. I have also just finally installed 10.7.4, but it doesn't help either.

Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Not printing text only on Canon--grahics print ok. Not printer problem. Prints ok on a Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Without your printer model numbers, readers can only give you vague general directions.
System Preferences > Print&Fax > ...
... shows a list of all set-up printers.
If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
Mac OS X 10.6 Help: Resetting the printing system

Crystal report printing problem in Malayalam

Hi,
I have a printing problem in Malayalam in crystal report.The viewer displays the correct font but the printed output displays the square boxes.I have installed the font.I am using Visual studio 2010 and crystal report 13.0 version.what could be the problem???
please help me...!!!

Hi priyashekar,
I’m afraid that it is not the correct forum about this issue, since this forum is to discuss Visual C#. You can post your question in the
Crystal report forum: http://scn.sap.com/community/crystal-reports-for-visual-studio/content?filterID=content~objecttype~objecttype[thread]
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Print problem. trying to print a document in Preview, the start of the text prints half way down the page not at the top of the page?

Print problems. Printing out an email the text starts half way down the page. I tried taking a picture of the text I wanted to print, tried to print from Preview and have the same problem. If anyone has any ideas I would really apreciate it. Thanks Penny

One more thing to check: System Preferences/Print & Scan. Make sure your printer is set as Default.
I'm using OS X 10.8 and I don't see Page Setup anymore. If you have access to Page Setup, check to see if there are any adjustments to make there.

My "fix" to print problems in LR (using MS XP)

Having had the same problems printing from LR as many others are complaining about, I thought that I might give my 2 cents to what I did to solve (?) the problem. I have to run with current setting in a while to be convinced that it is not just an intermittent fix though ;-)
My problem when printing from LR was that the print came out much too Cyan-Green and somewhat dark when color management where handled by LR. When the same photo was exported to PS Elements (PSE) in Tiff with the Pro-photo color profile embedded, adjustments from LR, and printed using the same driver setting and color management, the print came out fine.
I must mention that I have had fine printout in previous LR versions but I'm not sure when the problem started. But at least from LR version 1.3, 1.3.1 I have had problems printing a proper print.
As I'm not 100% sure what caused the fix, I don't want to leave much info un-documented, so I start by describing my system etc.:
- Athlon 64 3500+ with 2 GB RAM
- Lacie 119 LCD monitor (calibrated with a ColorVision Spyder 2)
- Epson Stylus Photo 890 printer; an old (6-7 years) 6 color dye-sub printer, but it can still produce very good prints. (It is BTW, the A4 printer version of Epson 1290).
- Microsoft XP service pack 2
- Adobe Photoshop Lightroom 1.3.1.
- Adobe Photoshop Elements 5
- Latest Epson 890 printer drivers ver. 5.21/P (from 2004)
- ICC profiles for various Epson printer paper
- Paper used: Ilford Printasia Photo Glossy Paper (but I have tried Epson Premium Glossy Photo Paper as well with same results)
I used following setting:
- In printer driver: "No color management" was selected
- LR and PSE color management; printer profile: Epson Stylus Photo 890 Premium Glossy Photo Paper, Rendering Intent: Perceptual
. LR Print sharpening: High
- LR Print resolution: 360ppi
When the photo was opened in PSE and I had printed a small print with above mentioned printer driver/color management settings. The print looked good, but with a little magenta color cast, so I thought that if I used a different printer profile this might help (I have no ICC profile for the Ilford paper). So I chose the "Epson Stylus Photo 890 Photo Paper" instead and printed again, and this time the photo looked as it did on my calibrated monitor. I have to admit I was a bit delighted even though it was from printed from PSE and not from LR, but seeing that color management worked in other applications was a relief.
In PSE, I also I tried changing to a different Rendering Intent before changing printer profile, but with no success.
Another thing that helped further was to change Media Type in printer driver from "Premium Glossy Photo Paper" to "Photo Paper".
After the print success in PSE I went back to LR and changed the Printer Profile to "Epson Stylus Photo 890 Photo Paper" (still with "No color management" and "Photo Paper" selected in printer driver) and printed the photo again. Now the photo looked as good as it did in PSE (!!!???).
Now I have made a few printer preset in LR for various print sizes, and the prints look fantastic. Every time! Do I have to mention that I am a happy guy ? :-)
BTW, remember that a printer preset also saves the printer driver settings. Forgetting this can easily cause some unexpected results.
The only thing is that, I still do not know what fixed the problem, and I am a bit worried that the problem might come back again. Maybe the print related changes made in PSE and the following selection of the same settings in LR did - somehow - "synchronize" LR to a proper color management. Sounds weird, but if it works...
I hope this long explanation was useful to - at least - some of you, who experience printer problems in LR. LR is a fantastic application, and I enjoy using it, but the printer problems has really been frustrating.
Good luck!
/Per

Little unclear about the border thing- you say it prints with a too wide border, but also say:
When I print the image with this set up, it still is printed without a border.
It's a factor of your printer, though; some can never print without a margin around all sides; this can be a border, or cut off. Good news, though; you can have a 5 x 7 borderless, or with any size border you wish if you print on larger paper, and trim to taste.

Printing problems with HP Laserjet P1005

everything seems to be ok with my printer HP Lasejet P1005, but it just doesn't print. The works are in the gueue and error messages continually is "set the new toner cartridge" althrough I've changed the cartridge already. Also there is a message "HP:s part number"
What can or should I do??? Help!!!

Hi @rlp48,
I see by your post that you are getting the error message "set the new toner cartridge" and you have already changed it with a HP toner. I would like to help.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
Open and close the lid 5 times quickly. It should print out a page with lines on it.
Did it print the self test?
If the self test page printed, clear the Spool folder and restart the Print Spooler and try printing again.
How to Clear Current Print Queue In Windows Vista & Windows 7.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Are you using Genuine HP Toner?
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printing problems with hp laserjet 1018

- printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
- hp photosmart premium c309 works with all file types
Windows 7 64 bit
Adobe Acrobat Pro 10.1.7
Acrobat Reader 11.0.3

Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

STRANGE PRINTER PROBLEMS

Similar Messages

Maybe you are looking for