Strange problem after share a port with My webserver and FMS

My webserver is running, and I want to use rtmpt(80 port) to player a video. So I did as same as:
http://help.adobe.com/en_US/flashmediaserver/configadmin/WS02f7d8d4857b167770a4686812a808b 6918-8000.html
If you want Flash Media Server and your web server to share a port, set up Flash Media Server as the proxy, put your web server on an unused port, and change the fms.ini HTTPPROXY_HOST setting to point to that port.
httpd.conf
Listen *:8080

Everything is ok except when a post a form.
When I submit a form, the website send me a “application/x-fcs” type empty file let me download file.

Similar Messages

Strange problem after installation of bootcamp with windows 7 on Imac i5 27

After installed Windows 7 (Single partitions Leopard Snow and Windows works very fine) i have a bootloader problem with the option key at startup of the machine.
If i hold option for a little time i don't see any icon, only a gray display. Only if I hold down the option key for about two minutes icons appears correctly.
The problem not exist if i install rEFi, bootloader, it start very fast and all work fine. Any ideas?

Hi,
This is Oracle Database Express Edition (XE) forum.
If you like use APEX listener and have problem with that here is link to correct forum.
ORDS, SODA & JSON in the Database
If you like use EPG see configuration steps from APEX install instructions
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21673/otn_install.htm#CBHBCBBJ
Regards,
Jari
My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

Problems after transfering Cost centers with LSMW

Hi,
I have a problem after transfering Cost Centers with LSMW.
The first Batch input run created all cost centers in one CC Group erroneously - cause they should be placed in different CC groups.
I changed LSMW settings and made another batch input run - now the Cost centers were created in proper groups. I think that I deleted all CC's created in previous batch input run, but now I am not too sure, because there is a problem...
Cost centers exist both in their proper groups and in the one group mentioned by me before. So there is such situation that Cost center appears in Standar hierarchy twice at the same time.
When I delete cost centers - they are removed from their proper groups but the CC entry remains in that one group - all CC are there inactive.
How can I get rid of them. I tried deleting them - but it's impossible - the system doesn't see them.
When I run the batch input again - the same cost centers appear in proper groups and at the same time they become active in the one group. The standard hierarchy group is not UNIQE.
Please advice me how to delete these entries from standard hierachy.
Best wishes,
Karol

Hi,
Always recommended before loading into live system: upload in test system and check. check again just to make sure all is correct before real load.
In your case you probably would have been best to do a group change after incorrect upload.
Do Ambiguity check in stadnard hierarchy to explore all incorrect entries. Depending on your version yo ucan change in that function (ECC6) ore need to run a report. Before running the report check that CC master records have correct entry. The report is RKCORRH1
Again, try in QA first and run in Test Run
Good luck
Hein

How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone

How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone. For 6months I had set up a network that shared the internet through bluetooth to my iPod 5th gen but i messed it up when i tried to add my iPhone 5s and i can't remember how to do it.

The following has instructions: OS X Mavericks: Share your Internet connection

HT203521 In iOS8 I can't turn off shared iCloud calendar alerts. I share iCloud calendars with 3 others and am constantly getting their alarms for upcoming appointments. Settings- Notifications- Calendar- Shared Calendar Changes turns off changes only.

Have had new iPhone 6 for 2 months, using iOS 8. I share iCloud calendars with 3 others and I am getting bombarded with their upcoming appointment alerts. There seems no way to turn this off. I went to Settings->Notifications->INCLUDE(Calendar)->Shared Calendar Changes and turned everything off, but this only blocks alerts about new events or changes to events being added to the calendars, it does not block the 5-minute/10-minute/etc. alarms that go off immediately in advance of the appointment. There used to be a setting in iOS7 in "Mail, Contacts, and Calendars" way at the bottom to turn off alarms from shared calendars, but I don't see that in iOS8. Any ideas?

Finally figured this out when I read jodiemcneill 's post about Google calendars. Thanks!
Reposting the basic idea: to turn off event alerts from shared ICloud calendars, select the Calendar App, then click the "info" (i.e., the circled red 'i') icon next to the shared iCloud calendar to be silenced. Go down to "Notifications" and turn the slider off for "Event Alerts: (Allow events on this calendar to display alerts.)"
For good measure, you can also turn off the slider for "Show Changes" to prevent the calendar from displaying messages when shared events are added/modified/deleted, although this can be done "globally" for all shared iCloud Calendars in Settings->Notifications->Calendar->Invitations (turn off all sliders, click "none" for Alert Style).
This has been a major pain in the ... neck ... for the past 3 months. So glad to start the new year with a suddnely-much-quieter iPhone 6.

I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

Who is your carrier? Are you actually on 3G?
Do you have 3G turned on or off? Settings > General > Network > Enable 3G

Strange problems after installing Solaris 10 u6 on 64-bit PC

Hi all,
I have run into some very strange issues after installing Solaris 10 update 6 on my 64-bit PC (it's almost new). The problems are with graphical applications and desktop environments based on GTK (so it seems, at least).
I have installed Solaris normally, following most of the default options and choosing the "Entire Group" software packages installation. However, after the first login I've seen that:
1. No user creation process was offered to me and I had to login as root (I find it pretty strange)
2. After logging in as root into JDK system, my screen went blank for a couple of seconds and then the system threw me back to the login screen.
3. Logging into the old CDE environment was possible, but launching Firefox from there (using a command line terminal) wasn't. It gave me the following error message:
ld.so.1: firefox-bin: fatal: libmlib.so.2: open failed: no such file or directory
ld.so.1: firefox-bin: fatal: relocation error: file /usr/bin/firefox/firefox-bin: symbol gtk_init: referenced symbol not found.
It's very strange because GTK toolkit and JDK environment are supposed to be the core functionalities provided by Solaris. Does anyone have an idea what's going on?
My system sum-up:
CPU: Intel Core 2 Quand Q6600 @ 2.4 GHz
RAM: 2 Gb of DDR2 SDRAM
Motherboard: MSI MS-7529 (Intel G31 chipset)
Monitor: AOC LM725
Graphics card: NVIDIA GeForce 9400 GT
Hard disk: 2 Western Digital HDs (SATA) 320 Gb each,
1 Western Digital external USB HD MyBook Essential 2, 500 Gb
DVD drives: 2 LG DVD drives (SATA)
Network card: Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
I use my system in the following way:
On the first hard disk, I have a one-partition 32-bit Windows XP SP3 installation (ported from my old computer).
On the second hard disk, I have a functioning Fedora Core 9 installed on the first half of the disk's space (the installation is self-organized into several Linux partitions, e. g. /boot, /swap etc; I am a newbie so I don't know too much about Linux partitioning - only specified to Fedora how much space it could use for its volume group). I installed Solaris onto the second half of the second disk.
It has be noted that my USB external drive seemed to conflict with the network or graphics cards during the Fedora installation and caused it to hang sporadically, so I installed Fedora with this disk detached. I also detached it when I was installing Solaris, though it seems to have not influenced the problems I experienced. I also have attempted installing Solaris before I did so with Fedora, but had the same issues.

Well, it seems that the cause of the problem was that my DVD image was just corrupted - I didn't check it vs MD5 codes supplied by Sun assuming it went automatically OK. I downloaded the image again (this time it was OK), reinstalled the system and successfully logged into JDS. However, I am still puzzled why Solaris doesn't offer to create a default non-root user during the installation process.

Strange Problem in dynamically list population with record group

Hello Room,
I am dynamically populating a single list with 2 record groups. I am having a strange problem. All the code are written in 2 seperate buttons. The code of every button is given below.
Button 1 code:-
DECLARE
rg_reports RECORDGROUP;
rg_name VARCHAR2(40) := 'REPORTS';
vTemp NUMBER;
BEGIN
-- Pls make sure Group doesn't already exist
rg_reports := FIND_GROUP(rg_name);
-- If it doesn't exist then create it and add ur query to it
IF Id_Null (rg_reports) THEN
rg_reports:=CREATE_GROUP_FROM_QUERY(rg_name , 'SELECT companyname,to_char(co) from companymaster order by companyname');
end if;
--Populate the Record Group
vTemp:=POPULATE_GROUP(rg_reports);
POPULATE_LIST('REPORTS.EXAMPLELIST', rg_name);
Delete_Group( rg_reports );
END;
Button 2 Code:-
DECLARE
rg_reports RECORDGROUP;
rg_name VARCHAR2(40) := 'REPORTS';
vTemp NUMBER;
BEGIN
-- Pls make sure Group doesn't already exist
rg_reports := FIND_GROUP(rg_name);
-- If it doesn't exist then create it and add ur query to it
IF Id_Null (rg_reports) THEN
rg_reports:=CREATE_GROUP_FROM_QUERY(rg_name , 'SELECT accountname,to_char(co) from accountmaster order by accountname');
end if;
--Populate the Record Group
vTemp:=POPULATE_GROUP(rg_reports);
POPULATE_LIST('REPORTS.EXAMPLELIST', rg_name);
Delete_Group( rg_reports );
END;
The code is same here only the sql is different in these 2 buttons. Now the problem point.
when i press button 1, I get the list populated ok. when i try to click on the list item and keep the button pressed the list gets scrolled properly.
when i press button 2 after that i get account names well populated in the same list item as well, but this time, when i keep the button pressed the list does not scroll below as in button 1. It does not even allow to select different item from the list of button 2 code.
I tried to clear cache, cookies, exit browser everything and try to run the button 2 first, but still the problem in button 2 code.
Following are my system details.
windows 7 professional edition.
Oracle database 11g on windows 7
Oracle forms 10g patchset 10.1.2.0.2 on windows 7
Browser Netscape Navigator with oracle jinitiator 1.3.1.22
But this form is run by a client side html file where oracle forms 10g is not installed on windows xp. html file is just referring server url to run the module. The file is run on Netscape navigator browser with oracle jinitiator 1.3.1.22
My question is that is this a bug ? if button 1 gets the list item scrolled, why is the problem with button 2 even though i press it first. Here I am deleting the record group also. after the code is over. Initially I thought this may be the character length problem so I took the maximum character length for that list item as given by the 2 columns in database.
Why is the list scrolling not happening in button 2 but in button 1 with same codes on both ?
Anybody please help me.

The problem is the second query. I would guess that the TO_CHAR(co) is not unique for each account, but is the same for the accounts. And as the second item in the select-list is the listitems values, all your listitem-entries have the same value. therefore, of you select any entry, the list will always go the the first entry again.
Adjust your query.

Strange problem on ThinkPad Edge E540 with lenovo power manager utility

hi all
I bought a new laptop    the lenovo thinkpad edge e540 with win 7 64 pro os
and after the first update from the lenovo update utility
the power managmet tool icon on the taskbar is half down
so it is not normally and i try to   uninstall and install again the power manager tool
and after it   the problem not solovd and still show half down on the taskbar
i attach the picture of the problem
i will appriciate if someone can help me with this issue
and also  someone from lenovo company can take a look on this problem
thanks

Good day.
Please have a look at this thread:
forums.lenovo.com/t5/T400-T500-and-newer-T-series/T430s-Error-in-how-the-Power-Manager-icon-displays...
and try the steps that richk describes in the last message.
Hope it works for you.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Muse 2014 - Problems after converting a Site with Safari

After converting a site to muse 2014 and exporting it to html the JS-error message "Einige der Dateien auf dem Server fehlen oder sind ungültig. Löschen Sie den Browser-Cache und versuchen Sie es erneut. Wenn das Problem weiterhin besteht, wenden Sie sich an den Autor der Website." ("Some of the files of the server are missing or incorrect") apears when opening every site.
I did not made any change to the site itself, the site was only converted and re-exported.
The error is only shown with Safari, but i only tried with IE 10 under Windows

When you republish your site, make sure you upload all files. New versions of Muse may change JavaScript files or CSS files for pages that you have not changed. The error message is indicating there are expected files that are missing or that files it found and loaded were generated from an older version and need to be updated.

Can't forward ports with Cisco EPC3925 and Airport Express and Extreme!

Hello,
I have very big problem, I've been trying for whole day to forward ports for steam and I just can't I tried everything, I have Cisco EPC3925 ( Its main thing I think its router - right ? ) Then I have connected Airport Express to it with ethernet cable ( It's working as DHCP and NAT I have double nat issue in my airport program I don't know what is this ) also Airport Express is set to create a Wi-Fi network, then I have connected Airport Extreme with Wi-fi and set to exceed wi-fi network and can't change anything in it , can't open ports etc. etc. MY COMPUTER is connected to Airport Extreme ( 2nd device ) with cable ! So Im not connecting my computer to internet with wi-fi
Also I've been looking in Airport Express ( the 1st device ) and I saw that there I can open ports , but I opened them and nothing happend ... ports are still closed... Also I've set my computer ip to static , tried everything . And portforward.com site isn't helpfull . Also I tried to set Airport Express ( 1st device ) in bridge mode and nothing happend ( after I set it to bridge mode I can't open ports in airport program )
Please is there anyone that can Help me with this ????
Also I want to say that somehow I dont know how, but I managed to open ports in the past
I need to open all necessary ports because If I can't open them - I can't make a server and people can't join . I really really need help I've spent whole today's saturday to get it to work and this won't work !

Tesserax wrote:
I have Cisco EPC3925 ( Its main thing I think its router - right ? )
Yes, the Cisco EPC3925 is a combination modem and wireless router or gateway device. This is the device that you would need to configure for port forwarding/mapping.
Then I have connected Airport Express to it with ethernet cable ( It's working as DHCP and NAT I have double nat issue in my airport program I don't know what is this )
A "Double NAT" condition is when you have two or more routers in series where they all have NAT enabled. NAT is a service that is intended to allow you to share one Public IP address with multiple Private network clients. This is what allows you to have more than one computer on your local network have the ability to share an Internet access.
Since you have your AirPort Express connected to the Cisco by Ethernet AND the Express is configured to have NAT enabled is why you are getting a Double NAT warning.
Normally you would want all downstream routers to be reconfigured as bridges (NAT & DHCP disabled).
also Airport Express is set to create a Wi-Fi network, then I have connected Airport Extreme with Wi-fi and set to exceed wi-fi network and can't change anything in it , can't open ports etc. etc.
You will need to reconfigure the Express as a bridge. The fact that you have configured the Extreme to extend its wireless range is fine.
Also I've been looking in Airport Express ( the 1st device ) and I saw that there I can open ports , but I opened them and nothing happend ... ports are still closed
You do not want to open ports on the Express. Again, if you reconfigure it as a bridge you won't need to as all of its ports will be opened.
Ok I understand what u said, so I set my airport Express 1st device in bridge mode - if I do that I can surf internet without problems etc. Then when I set it to bridge mode my computer gets adress 192.168.1.X ( My computer gets 13 and I've set it to be static ) so my computer is 192.168.1.13 then -> I open ports for example 2700-27015 ( for steam ) in my router cisco website witch is 192.168.1.1 and in ip adress label I put my computer adress 192.168.1.13 after I do this I reset the router and turn it back on after all this everything should work fine and my ports should be open right?? Well..I've tried it.. after this I can surf internet without problems of course but my ports are still closed ... Im checking them on http://www.canyouseeme.org/ and it says they are closed I've tried with pultiple ports such as 80 .. and it just won't work I don't know why..
Also someone told me to use DMZ on and in ip adress put WAN ip of my airport express ( if its NOT set in bridge mode ) and open ports for my airport ( also I tried to open for my computer too ) - It doesn't work
Please friend tell me you can help me ..
Message was edited by: bolo822

Can I share my internet with my Ipad and simultaneously connect to a airport express that I use to remotely connect speakers?

Can I share my internet from my Imac with my Ipad and simultaneously connect to a airport express that I use to remotely to connect speakers?
The big problem that I'm having is that when internet sharing via the airport I can not simultaneously connect with my airport express. It would be great to be able to share internet from my Imac so I can be using my Ipad and at the sametime have my wife use the airport express to stream music in a different room. It would be awesome to be able to have the ability to do both. Does anybody know how?

Unless your iMac was made before 2006 (this forum is for old iMacs), you might get better assistance by posting in one of the following forum areas:
AirPort
Using iPad
iMac (Intel)

Multiple Problems after Leopard upgrade HELP! Video display and FW problem

I don't know if this is related.. but I've been battling multiple problems ever since I upgraded my G5 to Leopard a week ago. Everything was perfect under Tiger.
Well, I think I've got everything solved except two last things.
1. My 750GH Maxtor Firewire drive... when I plug it in... does not show in the desktop and it causes both my internal drive and two other Firewire enclosures to disappear from the desktop. I can see all of them mounted in the disk utility, but if this one drive is plugged in.. all icons disappear from the desktop. If I unplug or unmount the 750GB drive.. everything comes back.
I've reformatted this drive, etc. This does not happen on my MacBookPro. The drive mounts fine on that. I've tried different cables, I've tried USB (it's a triple interface Maxtor) and nothing seems to work. I would assume there's something wrong with the drive and not my desktop... but the drive works fine on the MacBookPro.
PLEASE!! Any clues would help...
The other problem that only occurred directly after upgrading to Leopard... is that my graphics now get corrupted and garbled. I've got two video cards running two LCD monitors. The card giving me problems is the ATI Radeon 9800 Pro (256MB). What happens is.. first all the window shadows and top menu bar start getting checkerboard patterns.. then the whole screen starts getting variants of different colors and checkerboard patterns. After awhile and refreshing the screen a few times... the problem goes away for a bit. Then comes back.
Again, this card and my entire system and drives were working fine under Tiger. Now, I don't know if I have a bad card? Is there something wrong with Leopard on my G5 2Ghz DP? Did my Maxtor 750GB triple interface drive just go bad with the upgrade?
I don't know where else to look, I'm guessing the "geniuses" at the Apple store won't help me since this machine is out of warranty. Any help would be HUGELY appreciated. I've been battling all these problems ever since I started the Leopard upgrade 4 days ago and have not got much sleep.

The drives not or disappearing on the desktop could point to the need to do a pram reset.
I believe you hold down the apple-option-p-r keys at startup and listen for a couple of chimes.

Problems while making a MovieMaker with different transition and music.

Hi..I am making a MovieMaker in flash.I dont have much of experince in flash ,There are some problems which I am facing.kindly guide me..Thanks.
There are 4 things in my project.
1)Uploading Images-First of all User will Upload the images,Based on those uploads there will be one xml generated which will be stored in a disc and by that xml the images uploaded be the users will be get in the flash.
Problem1-How to generate an xml file that would be stored in disc or localhost through which we can get the path of images?
2)Theme Selection-After the images have been uploaded and xml file have been generated then then the images would be loaded in one window.This is for the purpose of viewing those images that has been uploaded by users.After that there is one button below the window "Select Theme".In clicking that Button there is simply another frame opens (by removing child of the previous frames) in which there are some dummy animationswhich are already made .Like in oneAnimation there are 9 Transition effects fading,fly,spiral etc etc and in another Animation there are another 9 effects like zoom,blend and so onetc.User can select one theme out of suppose 9 themes then that theme is the theme of their movie.There is one file called themes.xml tahat containes all the information of the themes.After the theme is selected ,There is button in ThemeSelection called Select Music.
3)Music Selection-There are categories of songs like sad,instrumental,slow,pop etc,In each category there are some songs that are stored in server.Whatever the user will select that will be the theme song.songs are also fetching from xml.After selecting the song there is Make Movie Option in the music frame.
4)Make Movie-Finally based on the above selection the movie is generated which should create new swf dynamically and user can download that movie also with above theme and music selection and those images should play that theme with the background music as selected by user.
Problem2:-How to generate new swf that donot take images.xml,transition.xml and songs.xml.First of all i dont know how to create new swf at run time while using the file operations.and
Problem 3-secondly if i made some swf supposingly movie.swf then whatever the user selected then based on those images,theme and songs selection i called the movieClip object of the movie.swf and all those images with the selected transition and background music are playing in it BUT they need the xml files and images.But i want to give the user one independant swf which dont use xml files and images folder.How can i do that?
The Project is similar to this one
http://pmdvd.kodak.com/
Regards
Ankur

It looks like there is lack of fundamental understanding of flash/ActionScript capabilities.
Your post covers too many topics - forum works the best if questions are focused. You may need to polish your knowledge which will allow you to have answers to some of the problems.
The main thing you should know before proceeding is that one cannot generate swf files at runtime in Flash. And it doesn't matter if you go with Flash or Flex. Should swf generation be a centerpiece of your application, you may want to consider server side compiler.
Otherwise you may not need to generate swfs at all but allow users to see results of their work with help of dynamic content generation including database. In any case, you probably will need and extensive server side application.

Through my iCal calendar I decided to share my entries with my husband and I thought I was doing everything that was prompted of me to do but not only can I not find "us" or the URL address in the internet but I no longer have ANY CALENDAR ENTRIES!grrrrr

If there is anybody out there who can help me find my iCal entries from this week forward I would soooo appreciate it! I decided to "share" calendars with my husband and in doing so I have lost my appointments and can't find the URL or http:// blah,blah anywhere. I looked through my Time Capsule and of course nothing is there (it shows what exists now in the calendar which is nothing), I looked in iCloud and I don't know how to retrieve my stuff. Thank you in advance for your help. I really don't like these things because I am not very good at them. What I would think is simple every time becomes a huge mess and wasted life.

As iCloud does not have your calendars we have two options:
Contact Apple ASAP and ask them to see if they have a backup copy of your calendar data which they can restore from the server to iCloud. It's not Apple's responsibility to maintain backups of your data but most servers have a backup of some type. The challenge is that those backups probably get refreshed fairly quickly so you need to contact them fast so they can put a request in to whoever manages the iCloud servers (it might not be possible but its worth asking). http://www.apple.com/support/icloud/contact/
Something you can do right now:If you have a Time Capsule that suggests you are running Time Machine which backs up your entire computer (else why have a Time Capsule).
Make an iCal backup of what you still have: Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
Go to Calendars > Go Offline
Go to iCal > Quit iCal
Quit all open applications
Click anywhere on your desktop
Go to the "Go" menu at the top of the screen and hold down the "option / alt" key on your keyboard.
Click on the "library" option in the menu.
While in the Library go to the Time Machine menu at the top right corner of your computer screen (Little clock face with an arrow going around it in a circle) and click "Enter Time Machine".
In Time Machine click on the the time line running down the right hand side of the screen to choose a date / time when you are 100% confident that iCal had the events you are looking for.
Once you've gone to the date you want, highlight the "Calendars" folder in the Library window.
Click the button that says "restore" in the bottom right.
Once the restore is complete, open iCal and see if your events are there.
If the events are there, Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to your desktop.
If the events are not there, go back into Time Machine and try an earlier date.
Once the calendars are restored to iCal and you've exported a copy out, go to Calendars > Go online
If the events vanish you can re-import them from the copies you exported to the desktop.

Strange problem after share a port with My webserver and FMS

Similar Messages

Maybe you are looking for