Strange problem occurred after exiting from ultra stamina mode..please help

I was using phone on ultra stamina mode since battery was very low and it got switched off once the battery was fully discharged.
After recharging when I switched on phone and deactivated ultra stamina mode, I was surprised to see that almost 70% apps were gone. Only few apps like WhatsApp and shazam were visible.
I checked apps setting, it was showing all apps that I had.
One message was continuously appearing " Google play services has stopped, it is not supported by your device, contact manufacturer".
I tried few things like clearing cache of play services and stamina app but no success.
At the end I made a new user and was amazed to see that everything was working fine and play store was running good.
But the main problem is that I want my old user to work fine and want all apps to appear that are not visible due to play services error or by ultra stamina error. Please provide the solution.
Thanks

 I would just reinstall the latest update with PCC  PC Companion (PCC)  Bridge (for Mac)   Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355  

Similar Messages

  • HT4085 Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i record, please help

    Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i recorded starting from today, please help

    It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
    Note that this can't happen if your iPhone is not connected to a WiFi network:
    When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
    iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
    Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
    PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
    from here: http://support.apple.com/kb/ht4106

  • Problem connecting after using Itunes 5.0. Please help!

    I updated to Itunes 5.0 a couple of days ago. I didn't have any problems installing it and was running fine. Then when I had purchased some music when it was imported to my Ipod, a couple of the songs were freezing. I was trying to figure out whether it was the song on my Ipod or if it was the purchased song. While I was doing that my program froze and told me it no longer recognized my Ipod and come up with the error message that says Itunes is not responding, End Now.
    After I did that, it seemed as though my Ipod had been deleted, and I thought all hope was lost. Now after looking in the files, it shows my Ipod Control folder has just been hidden. I have gone in and shown the files so they are no longer hidden. I also noticed it had the 4 letter song names in there too now. When I open Itunes again, it just hides them again and continues to say its unable to recognize my Ipod and that I need to update my Ipod software, which I have tried and still doesn't work.
    What should I do now? I was thinking about uninstalling Itunes 5.0 and going back to my old version, but I have seen that other people have been having problems with that.
    My main concern is that I don't want to lose my music because I don't have it backed up because my computer doesn't have the space to hold all of my songs and I don't have any external drives or anything to store them on.
    Please help!

    I have had a very similar problem
    -Currently using: Windows XP Home edition with most recent updates
    -2.39Ghz processor, Itunes 5
    -IPOD 20GB I only have used up 3.9GB
    Very similar problem
    My IPOD has recently had a weird problem after installing Itunes 5. When I first connect the ipod to the computer everything seems to be working fine, because the ipod displays the "please do not disconnect" message, and ITUNES come up on the screen and lets me play music from my ipod only for a brief few minuets. The computer then stops playing the song it was currently playing and I tunes freezes. After that point the only way to unfreeze Itunes is to press select/menu on the ipod. When the ipod restarts and I plug the ipod back into my computer it won't bring I tunes up again, and I am unable to access the ipod drive. A screen comes up after 10 minuets saying I have to reformat my ipod because it can not be read. I have already done so about 10 times and I still have the same problem.
    My ipod doesn't freeze when I'm just listening to it with my earphones or on my stereo, but it laggs more thean usual when changeing songs or menus (I have only used up 3.9GB). I have also tried using my ipod on other computers and I get the same problem. Please Help!

  • I have windows 7 64 bit and install firefox 4 .my problem is after install firefox , icon firefox change please help me

    I have windows 7 64 bit and install firefox 4.after install firefox for one day firefox icon change please help me.
    Thank alot

    See the following  -
    Creative Cloud Help / Error downloading Creative Cloud applications
    http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

  • STRANGE problem with sound in SWF files...Please help if you know how...

    Hello,
         Okay, so, I recently learned how to use Adobe InDesign to create a book.  there is a lot a still don't know.  When I export my document as a SWF file, it works great and has sound and animations where it should.  However, if I move that SWF to a new location, such as my desktop or uploading it to an e-mail, it looses all the sound information.  To add sound to each page, I added a hidden object to each page that was the sound file so that I could attach it to a button.  It seems that it is loosing that sound file if I move it to a new location.  Any ideas or solutions?

    UPDATE:  I have learned that my problem is related to a "resourse folder" which must go wherever the file goes in order for it to have sound.  This is a bit inconvinient for me, as my client is computer illiterate.  I really want to find a way to just embed the sound into a file that you can just open and play.  To the best of my knowlege, SWF format is the only format that allows for the page turning animation.  Does anyone know a way to embed the sound into the SWF file or am I SOL here?

  • Ultra Stamina Mode problem

    Yesterday I've updated my phone to 4.4.4, and today I've activated the Ultra Stamina Mode option, and when it was done loading, everything was working fine.. I've disabled Ultra Stamina Mode, the phone rebooted, everything was working fine until I've enabled the Ultra Stamina Mode again, and after it was done loading, then I had to go.. I've listened to music on my MDR-ZX610AP(which btw, the button is now finally working), and after 30 minutes, when I came back home, I wanted to disable Ultra Stamina Mode, but it didn't work(I've tapped on the notification and pressed Okay as usually, but the phone was simply not responding to that command, I mean it was not preparing for reboot), so I've rebooted the phone by holding power and selecting restart, and after the restart, I got stuck somewhere between Ultra Stamina Mode and the normal mode.. My screen is gray, I only have some apps.. And I've tried to reenter the Ultra Stamina Mode and get back to normal, nothing.. Tried to reboot in normal mode, nothing.. What can I do, beside repairing using pc companion or factory reset? I don't really want to lose my data..

    Hi,
    That sounds strange. I suggest that you boot your phone into safe mode to see if you experience the same behaviour:
    http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008
    Otherwise, it sounds like you need to perform a software repair or a factory reset.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • HT4623 Take pictures, but are not taken to save them in a photo album. This problem occurred after you update to ios 6.0.2. My phone is iPhone 5

    Take pictures, but are not taken to save them in a photo album. This problem occurred after you update to ios 6.0.2. My phone is iPhone 5

    That's corrected, they save to your camera roll.

  • Received a message after exiting from an online game.

    this is my first time using my T400 to play an online game..however when i exited from the game..my desktop popped out a message..it says my resolution is not optimal..optimal resolution should be 1440 X 900..but my resolution was that..so what's the problem? i seem to always get that message when i exited from the game..any help would be appreciated..Thanks

    Call them again and tell them you want a Refund. Send it back then Order another or something else.
    EDIT:
    Apple has a 14 day No Questions Ask Return Policy for full refund. Take advantage of it and return that system.

  • I am facing a new problem after a missed call. i phone will get freez on its lock screen after a miss call. Its seems that its main screen touch is not working properly.  This problem occurs after each and every missed call.

    I'm using iphone 5s with ios 7.1.2  & I am facing a new problem after every missed call. i phone  gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its  irritating to reboot the phone frequently after each issue....

    Hello dipthebe,
    Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Regards,
    -Norm G.

  • "Ultra Stamina Mode Repair": Z3 keeps restarting

    Hi,
    Since a little while I am owner of a Z3. Unfortunately, I can't use it because of the following problem. After I turned the Ultra Stamina Mode off, I get a pop-up that says: Ültra Stamina Mode Repair" Then my phone turns off and keeps restarting.
    Please, can someone help me? How do I solve this? It's really annoying and frustrating .
    I hope to receive some useful replies, thank you.

    Try performing a system repair using Pc Companion as this will often fix issues - This will factory reset your phone
    Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
    Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the onscreen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
    If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • Alarm and Clock inappropriate in Thai language on Ultra Stamina Mode

    Hi support team,
    I have found that letter of "Alarm and Clock " is showing inappropriate in either the first of Thai alphabet or vowel of "า".
    -The first of Thai alphabet should show full name as "ก",not half of "ก"
    -The vowel of "า",not half of "า"
    Please refer the link :https://app.box.com/s/rfsph14jw4mmepk2rqsjc949v1cilpp4

    Hi @Hampus and support team,
    I can understand that.
    Today Local support called me and sent me the email to repair and check software number as email below.I  will take a look what their answer is.
    And this issue is also happening on UI (normal) mode as well.please find its screenshot below.
    " Date: Mon, 25 May 2015 12:45:53 +0200
    From: [email protected]
    Subject: Sony Xperia Contact Center, Service Request: 1-19216390692
    To: 
    ขอบคุณที่ใช้บริการ Sony Xperia Support. คำถามของคุณได้เข้าในระบบเรียบร้อยแล้ว เลขที่อ้างอิงจะเป็นเลขที่ 1-19216390692. ทางเราจะตอบกลับโดยเร็วที่สุดครับ
    กรุณาอย่าตอบกลับอีเมลฉบับนี้ เนื่องจากจะอีเมลดังกล่าวจะไม่ได้ส่งเข้าไปในระบบ
    สำหรับการติดต่อครั้งต่อไปในเคสเดียวกันนี้ กรุณาระบุเลขที่อ้างอิงในหัวข้ออีเมลครับ: 1-19216390692
    Thank you for contacting the Sony Xperia Contact Center. Your question has been registered and the reference number is 1-19216390692. We will get back to you as soon as possible.
    Please do not respond to this mail since it will not be delivered to any recipient.
    For future emails concerning this case please include the following line in the message subject field: 1-19216390692
    What about a visit at www.sonymobile.com?
    Does your Sony mobile phone have the latest software? Check and update now using the Sony Mobile Update Service on http://www.sonymobile.com/update
    [THREAD ID: 1-8TSXXYJ]
    -----Original Message-----
    From: 
    Sent: 25/5/2015 12:44:20
    To: [email protected]
    Subject: FW: Sony Xperia Contact Center, Service Request: 1-19216390692
    Hi Support team,
    Builder number:14.5.A.0.270,Current OS:Lollipop v.5.0.2
    I did repair my phone,but still the same.
    Please be informed that this issue also happens on UI (normal mode)mode .
    All screenshots are provided here: https://app.box.com/s/rfsph14jw4mmepk2rqsjc949v1cilpp4
    Thank you and hope to hear from your team soon.
    Date: Mon, 25 May 2015 10:37:36 +0200
    From: [email protected]
    Subject: Sony Xperia Contact Center, Service Request: 1-19216390692
    To: 
    SupportSign upSoftware Update
    Dear Ekkasit,
    Thank you for contacting the Sony Xperia support centre.
    As we talk via phone. Please provide your Software version 
    Menu Setting > About phone > Build number
    We recommend try to repair your phone via PC Companion as detail below. (All data will be lose)
    Please back up all data before repair. After repair your phone please inform us back about this issue.
    Sorry for inconvenience.
    To repair the device software using PC Companion1.      If not already installed, download the PC Companion program from www.sonymobile.com/us/tools/pc-companion/, and install it on a Windows® computer.
    2.      Computer: Start the PC Companion program.
    3.      Under Support Zone, click Start. 
    4.      Under Phone Software Update, click Start, then click Repair my phone, and follow the instructions on the screen.
    For the latest news, information and product support please visit www.sonymobile.com.
    To learn more on how we can support you, please visit our XperiaTM Care at www.sonymobile.com/support . if you require any further assistance then please do not hesitate to respond to this email or call our customer support on 02-401-3030 or 001 800 852 7663.
    Please be aware that should you not respond within 5 days of this email your query will be automatically closed. Any further communications will not reach our support and a new query will need to be raised.
    Kind Regards,
    Walaiwan Kosallawath
    Sony Xperia Customer Services
    Contact Us | Legal
    Copyright © 2012 Sony Mobile Communications Inc. All rights reserved
    [THREAD ID:1-8TSXXYJ]
    -----Original Message-----
    Sent: 22/05/2015 21:51:45
    To: [email protected]
    Subject: phone Question to support
    From: <>
    Subject: phone Question to support
    Phone model: Xperia Z1
    IMEI:
    Message:
    Regarding Alarm and Clock inappropriate in Thai language on Ultra Stamina Mode
    Hi support team,
    I have found that letter of "Alarm and Clock " is showing inappropriate in either the first of Thai alphabet or vowel of "า".
    -The first of Thai alphabet should show full name as "ก",not half of "ก"
    -The vowel of "า",not half of "า"
    Please refer the link :https://app.box.com/s/rfsph14jw4mmepk2rqsjc949v1cilpp4
    Please help.
    Thank you in advance.
    Additional information:
    First Name: EKKASIT
    Last Name: EKKANASING
    e-mail: 
    Phone number: 
    City: Surin
    Postal code: 32190
    --Recipient: [email protected]
    This mail is sent via contact form on Sony Mobile http://www.sonymobile.com/"

  • Ultra Stamina Mode Major Bug.

    I have a Xperia Z1, updated to the latest Android lollipop version. I enabled Ultra Stamina Mode today while I was out and once I got home I tried to deactivate it.  But it would not deactivate.  Therefore I just restarted the phone.  Once restarted I find that I'm still in some sort of ultra stamina mode hybrid. Most of my apps are hidden in the default Xperia Home launcher even though I can still see they're on my phone in Settings->Apps.  I can't open any of the few apps that are available as they crash.  I got frequent Google Play Services has crashed notifications. I restarted several times, activated and deactivated ultra stamina mode numerous times and still no luck.  I searched this issue through Google and found that many people have also encountered this problem and that the only solution was to do a factory reset. So there you go, I had to do a factory reset, lost all my apps and data which weren't backed up all because Sony can't do quality control when updating their phones. If you're going to add a feature Sony make sure you test the **bleep** thing on your phones!

    You could try something more drastic, repair the phone with PCC
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Request: Walkman in Ultra STAMINA Mode

    In ultra stamina mode, it is a bit strange that you can view photos, watch movies, but you cannot play music.
    As music playback is a frequently used function for most users (preheps), I hope Sony would add walkman app to Ultra STAMINA mode
    In long term, I hope user can select custom apps in Ultra STAMINA mode, such as Whatsapp, which is known to consume few juice.

    I'm afraid i don't know the technical reason for this but i'll forward the feedback internally.
    But regarding 3:rd party apps and apps that requires a data connection it would probably defeat the purpose of this function.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • I have a collection of thousands of ebooks mostly in epub  & some in PDF formats.  After migrating to Maverick all books disappered from my Ipad. Please help.

    I have a collection of thousands of ebooks mostly in epub  & a few in PDF formats.  After migrating to Maverick all books disappered from my Ipad. Please help. In itunes library book option has vanished. What do I do?

    Hi Akshay,
    If you want your images to appear standalone with no other page item on the page, then you can insert Page break on an image.
    This is how you can specify a page break:
    1. Select the image
    2. Goto Object->Object Export Options
    3. Select EPUB and HTML tab
    4. Select Custom Layout check box and then check Insert Page break. You can select from the option in the dropdown-Before Image, After Image, Before and After Image as per your requirement.
    Regarding your question about images:
    You export your graphs as JPEG but are those JPEGs of good resolution? If they are, then InDesign is doing something wrong during export but if the JPEGs are not of good quality then it is not an export issue. Please provide some more details here.
    Regards,
    Pooja

  • HI! I am using iTunes with Windows 7 64bit.after upgrading itunes  to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

    HI! I am using iTunes with Windows 7 64bit.after upgrading itunes  to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

    Refer this article to reset Winsock to it's default.  Your PCTools may have inserted LSP.
    http://support.apple.com/kb/TS4123?viewlocale=en_US
    After reset and restarting windows, you may get a prompt to remap LSP, click no.

Maybe you are looking for

  • Regarding assembly indicatr field in CS03(Which table can i fetch it from?)

    Hi, I have a simple query regarding the transaction CS03. When I give the Material Number, Plant and BOM Usage as input, I would get the list of components for this material. Inside the transaction, is a CHECKBOX field ASM - this Indicates that the c

  • JCO RFC error

    Hi Gurus, I have created two JCO Destinitation for my RFC, when i am trying to ping the connection it says "ping successful" but when i test i am getting the following error. “com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: The initial p

  • Need Help With Dreamweaver Divs

    This is a clip of my website that I am making, it is not online yet. But what I need help is with the divs, as you can see the div with the blue text is overlapping a fireworks html banner I made. Any way I can fix this so that the fireworks banner g

  • Wired PC loses connection with WRT54GS but wireless stays on.

    Occasionally my wired PC connection through the WRT54GS stops. I power down the router and everything comes back OK after powering backup. The wireless signal continues to work even though the wired signal fails. Is there something I need to change t

  • Missing template fonts

    Hello I am trying to create new documents in Pages (v.1.0.2) using the default templates and most give me a warning for "missing fonts". For example, Educational Newsletter is missing PrincetownLET and a couple others are missing Palatino-Roman. Are