Strange problem running 2x instead of 4x GF4TI4200 VTD8X vivo

ok I just got this video card today so bare with me this card has a utility that gets install when I install the drivers that tells me the information of the card, and I notice that in the AGP information it saids that the card is running at 2x times instead of 4x since my motherboard doesn't support 8x so I try changing it but it doesn't let me, even when I highlight it doesn't work and I updated everything and still nothing, and the motherboard has support for 4x AGP slot so my question is what can I do to make this card run at 4x do I have to format my pc again and do a clean install because the one that was on it was a Geforce 2 TI200 64mb or erase everything related to the card or what? another thing that I look around in the forum is that the powersupply has to be 300 or more and right now I am running a 250watt psu but everything works
my motherboard is a little bit old but right now I don't have enough to make an upgrade it is a socket 370 motherboard with a PIII 800mhz processor and 512mb Sdram
any help will be greatly apprecieated.
By the way here is a picture of what I am talking about

Quote
Originally posted by PhanosP
SCHIDER234,
I have too a p6vap-a+ motherboard with windows XP. My psu is 250watt but everything works ok so far. My card is Geforce FX 5200 TDR 128 and running at 4x.
Have a nice day,
PhanosP
WOW what a coincidence lol so I guess it was driver base well everything is working fine for now thanks for the replys :D
And I also forgot to mention that I change the PSU to 350 hopefully there will be no problems

Similar Messages

Strange problem running J2SE 1.4.2_05 SDK

Hi!
I am Finnish computer teacher in highschool. Last summer we had new computers in our class and SDK doesn' t run any class files anymore. For example following code:
public class Moi{
public static void main(String[ ] arguments){
System.out.println("Moi");
javac Moi.java
Everything goes very well. Compiler doesn' t complain anything and it does the job. But
java Moi
gives error statement like "exception in thread main ... ClassNotFound or so on."
I have given correct path-statement in autoexec.bat file because compiler handles the job. We have also installed directx 9 to our system and we are using windows 98 as our operating system.
sami

Hi!
After I compiled the file succesfully. I gave launch command like this
c:\mydocs\java Moi
I have not used any classpath variable.

Strange problems with Windows 7 running on Bootcamp

Hi there. I have just installed Windows 7 using Bootcamp on my Macbook with Leopard. I have a few strange problems and just wanted to see if I could gain any help or see if anyone else is experiencing these problems. Apart from those, its running great :P
Main one is when I close the macbook shut, then open it back up the screen stays black, i can hear it open back up but its like it just stays in Sleep mode. I then need to hold down the power button and switch it back on.
Secondly when I use the down, up left or right arrow button to scroll down in the respective direction the cursor is moving around like it would on a word document. It will scroll down eventually but only becuase the cursor has reached the end of the page.
Thanks for your time and I really hope someone can shed some light.

Hey, I'm having this issue too, however I also get freezes while the screen is still on, or while the screen power saves, and will not resume.
The computer stays on, and warm, meaning it never powers off, nor realizes its hung-up, and the only way to get back to work is a hard shutdown and reboot.
Details are below, and x64 Win 7 MSDNAA RTM Build 7600 - 4gb of Corsair 4-4-4-12 2x2 ram.
I have already gotten the newest commercial nVidea drivers and I am running RivaTuner with appropriate settings, and I have disabled the Wired NIC, and turned off the wireless NIC power-saving settings.

Strange problem... Query runs faster, but report runs slow...

Hi Gurus,
We are using Report 10g on 10g Application server and solaris. we created a report on a table which has 10,000 rows. The report has 25 columns. when we run this query in Toad it took 12 sec for fetching all these 10,000 rows
But when we run the report with Destype = 'FILE' and Desformat = 'DELIMITEDDDATA', it is taking 5 to 8 minutes
to open in excel ( we concatenated mimetype=vnd-msexcel at the end of the url if the Destype=FILE). We removed the layout in the report as it is taking 10 to 15 mins to run to Screen with Desformat=HTML/PDF(formating pages taking more time). We are wondering why DELIMITEDDATA format is taking long time as it runs only query.
Does RWSERVLET take more time of writing the data to the Physical file in the cache dir? Our cache size is 1 GB. we have 2 report servers clustered. Tracing is off.
Please advise me if there are any report server settings to boost the performance.
Thanks alot,
Ram.

Duplicate of Strange problem... Query runs faster, but report runs slow... in the Reports forum.
[Thread closed]

A strang problem about Resin database connection pool

I am a beginner，hope somebody can help me.
my web site occured a strange problem after I used the Resin database connection pool instead of
connecting directly
the error message as follows:java.lang.IllegalArgumentException: Request cannot be null
at javax.servlet.ServletRequestWrapper.<init>(ServletRequestWrapper.java:100)
at javax.servlet.http.HttpServletRequestWrapper.<init>(HttpServletRequestWrapper.java:92)
at com.caucho.server.connection.RequestAdapter.<init>(RequestAdapter.java:96)
at com.caucho.server.webapp.DispatchRequest.<init>(DispatchRequest.java:97)
at com.caucho.server.webapp.IncludeDispatchRequest.<init>(IncludeDispatchRequest.java:77)
at com.caucho.server.webapp.IncludeDispatchRequest.createDispatch(IncludeDispatchRequest.java:87)
at com.caucho.server.webapp.RequestDispatcherImpl.include(RequestDispatcherImpl.java:389)
at com.caucho.server.webapp.RequestDispatcherImpl.include(RequestDispatcherImpl.java:345)
at com.caucho.jsp.PageContextImpl.include(PageContextImpl.java:807)
at _jsp._intro__jsp._jspService(/intro.jsp:60)
at com.caucho.jsp.JavaPage.service(JavaPage.java:75)
at com.caucho.jsp.Page.pageservice(Page.java:571)
at com.caucho.server.dispatch.PageFilterChain.doFilter(PageFilterChain.java:155)
at com.caucho.server.cache.CacheFilterChain.doFilter(CacheFilterChain.java:211)
at com.caucho.server.webapp.WebAppFilterChain.doFilter(WebAppFilterChain.java:177)
at com.caucho.server.dispatch.ServletInvocation.service(ServletInvocation.java:221)
at com.caucho.server.http.HttpRequest.handleRequest(HttpRequest.java:263)
at com.caucho.server.port.TcpConnection.run(TcpConnection.java:331)
at com.caucho.util.ThreadPool.runTasks(ThreadPool.java:464)
at com.caucho.util.ThreadPool.run(ThreadPool.java:408)
at java.lang.Thread.run(Thread.java:595)


<resin xmlns="http://caucho.com/ns/resin"
xmlns:resin="http://caucho.com/ns/resin/core">

<log name='' level='info' path='stdout:' timestamp='[%H:%M:%S.%s] '/>
<log name='com.caucho.java' level='config' path='stdout:'
timestamp='[%H:%M:%S.%s] '/>
<log name='com.caucho.loader' level='config' path='stdout:'
timestamp='[%H:%M:%S.%s] '/>

<dependency-check-interval>2s</dependency-check-interval>

<javac compiler="internal" args=""/>



<thread-pool>

<thread-max>128</thread-max>

<spare-thread-min>25</spare-thread-min>
</thread-pool>

<min-free-memory>1M</min-free-memory>
<server>

<class-loader>
<tree-loader path="$resin-home/lib"/>
</class-loader>

<keepalive-max>500</keepalive-max>
<keepalive-timeout>120s</keepalive-timeout>

<http server-id="" host="*" port="8080"/>


<cluster>
<srun server-id="" host="127.0.0.1" port="6802" index="1"/>
</cluster>

<ignore-client-disconnect>true</ignore-client-disconnect>

<cache path="cache" memory-size="10M"/>

<ping>

</ping>

<web-app-default>

<cache-mapping url-pattern="/" expires="5s"/>
<cache-mapping url-pattern="*.gif" expires="60s"/>
<cache-mapping url-pattern="*.jpg" expires="60s"/>

<servlet servlet-name="directory"
servlet-class="com.caucho.servlets.DirectoryServlet"/>
</web-app-default>

<database>
<jndi-name>jdbc/artunion</jndi-name>
<driver type="org.gjt.mm.mysql.Driver">
<url>jdbc:mysql://localhost:3306/union</url>
<user>as</user>
<password>as</password>
</driver>
<prepared-statement-cache-size>8</prepared-statement-cache-size>
<max-connections>20</max-connections>
<max-idle-time>30s</max-idle-time>
</database>

<host-default>
<class-loader>
<compiling-loader path='webapps/WEB-INF/classes'/>
<library-loader path='webapps/WEB-INF/lib'/>
</class-loader>

<access-log path='logs/access.log'
format='%h %l %u %t "%r" %s %b "%{Referer}i" "%{User-Agent}i"'
rollover-period='1W'/>

<web-app-deploy path='webapps'/>

<ear-deploy path='deploy'>
<ear-default>

</ear-default>
</ear-deploy>

<resource-deploy path='deploy'/>

<web-app-deploy path='deploy'/>
</host-default>

<resin:import path="${resinHome}/conf/app-default.xml"/>

<host id=''>
<document-directory>D:/artunion</document-directory>

<web-app id='/'>

<class-loader>
<simple-loader path="$host-root/xsl"/>
</class-loader>
<servlet-mapping url-pattern="/servlet/*" servlet-name="invoker"/>
</web-app>
</host>
</server>
</resin>
Thank you!

Strange Problem ABAP Prog.

Hi,
Very strange problem. I have the program below;
When I run it , I would expect ls_business_object-Value
to have the contents of header , but it does not, when I look at it in the debugger. It adds the element, but there is nothing in value.
Can't really understand why. I've done this with many other programs without any problem. Thanks.
REPORT test.
data:
      ls_business_object     TYPE swcont,
      lt_business_object     TYPE TABLE OF swcont,
      HEADER type BAPISDHD1,
HEADER-REFOBJTYPE     = ''.
HEADER-DOC_TYPE       = 'TA'.
HEADER-SALES_ORG      = '1000'.
HEADER-DISTR_CHAN     = '10'.
*l_ORDER_HEADER_IN-DIVISION       = '00'.
HEADER-PURCH_NO_C     = '1234567'.
HEADER-PURCH_DATE     = '20050531'.
Pack into swcont
ls_business_object-element       = 'HEADER'.
ls_business_object-Value = HEADER.
APPEND ls_business_object TO lt_business_object.

Hi,
In that lt_business_object,it is having 255 char for value.
So I suggest you to do
concatenate
HEADER-REFOBJTYPE
HEADER-DOC_TYPE
HEADER-SALES_ORG
HEADER-DISTR_CHAN
HEADER-PURCH_NO_C
HEADER-PURCH_DATE
into
ls_business_object-Value.
instead of
ls_business_object-Value = HEADER.
Then
APPEND ls_business_object TO lt_business_object.

Exception strange problem

Hi guys,
I have written a small game (with JDK1.2) wich works fine on my PC at home (windows 98), but when I tryed to launch it on XP at work (with SDK1.4), I have strange problem with running it. The message I get is like that: Exception in thread "main" java.land.NoClassDefFoundError: DotGame. The CLASSPATH to (td.jar and tools.jar) is set correctly and PATH as well. Did I miss something ? Any suggestion ?
Please, give a hint.
Mike

I have set in Environment Variable : CLASSPATHIt's better to use the -cp or -classpath arg when invoking java or javac instead of setting the env var.
>
%CLASSPATH%;.\e:\j2sdk\lib\dt.jar;e:\j2sdk\lib\tools.jarYou shouldn't need dt.jar or tools.jar. They should automatically be present.
Did you copy it exactly? You probably want ";.;e" instead of ";.\e" (but then you could get rid of that "e" entry since you shouldn't need dt.jar. ) The way you've got it, it's looking for an e directory under the current directory, instead of just current dir.
>
%PATH%;E:\j2sdk\bin;E:\j2sdk\jre\binPATH doesn't matter for this issue.

Strange Problems with XDK v10 Beta Version

Hello together,
I encounter two strange problems with the new 10.1.0.0.0 Beta release of XDK. I already posted them in the Beta Release Testing Forum, but got no replies, so I decided to start another try here. Maybe anyone can help me...
I upgraded a fine-working XSQL web application from XDK 9.2.0.4 to the new 10.1.0.0.0 Beta release of XDK. Since then, two bugs came up, which are reproducible by will:
1.)
When processing XSQL insert-requests, the error given below is thrown. I already found an entry in the bug database that says that exactly this error should have been fixed since 9.2.0.3 (see http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230695.1), but no it seems to be there again.
This is the stack trace:
XSQL-017: Unexpected Error Occurred
java.lang.NoClassDefFoundError: oracle/sql/OPAQUE
at oracle.xml.xsql.actions.XSQLInsertRequestHandler.handleAction(XSQLInsertRequestHandler.java:118)
at oracle.xml.xsql.XSQLDocHandler.getDocument(XSQLDocHandler.java:158)
at oracle.xml.xsql.XSQLPageProcessor.process(XSQLPageProcessor.java:171)
at oracle.xml.xsql.XSQLServlet.doGet(XSQLServlet.java:61)
at oracle.xml.xsql.XSQLServlet.doPost(XSQLServlet.java:82)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
2.)
When I deploy and start the application now, I always get the following error only once(!) after deployment when I call the application for the first time:
XSQL-017: Unexpected Error Occurred
java.lang.NullPointerException
at weblogic.jdbc.oci.Statement.executeQuery(Statement.java:865)
at oracle.xml.xsql.actions.XSQLQueryHandler.handleAction(XSQLQueryHandler.java:161)
at oracle.xml.xsql.XSQLDocHandler.getDocument(XSQLDocHandler.java:158)
at oracle.xml.xsql.XSQLPageProcessor.process(XSQLPageProcessor.java:171)
at oracle.xml.xsql.XSQLServlet.doGet(XSQLServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
When I reload the same page, it works. However, this is not really a good state for productive use.
Any ideas? After days of research, I'd be very glad for any help.
Thanks alot,
Eckhard

Once again me:
I guess I should partially revoke for the second topic: The error described above under 2.) seems to be rather a Weblogic versioning problem than a XDK bug, as it only occurs when deploying the application to WebLogic 7.0 (instead of 6.1, which was used before). Maybe I should search the BEA docs for an answer.
However, the first bug is still a problem to me...

Strange problem in AJAX

Hi,
This is first time I am using AJAX and I am getting a strange problem.
I have one text field and one select list.
when a enter a value in text field I want to populate select list using on demand application process.
Here is the code I put in java script for the page.
<script language="JavaScript" type="text/javascript">
function getChainList (custText, chainSelect){
var chainSelectObj = document.getElementById(chainSelect);
//alert(chainSelectObj.name);
var ajaxRequest = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=getChain',0);
//alert(custText.value);
ajaxRequest.add('P4_customer_num',custText.value);
ajaxResult = ajaxRequest.get();
//alert(ajaxResult);
if(ajaxResult)
chainSelectObj.options.length = 0;
          var chainArray = ajaxResult.split("chainsep");
//alert(chainArray);
          for(var i=0; i < chainArray.length; i++)
               {var colArray = chainArray[i].split("colsep");
//alert(colArray);
          chainSelectObj.options[i] = new Option(colArray[1],colArray[0]);
else {
chainSelectObj.options.length = 0;
//alert ( "it is not going in loop");
ajaxRequest = null;
</script>
For the text field I put the following in HTML form element attributes:
onBlur="javascript:{getChainList(this,'P4_CHAIN_GROUP');}"
here is code for Pl/SQL on demand application process getChain
Declare
lv_Chain_List varchar2(32000) := '';
cursor C1 is select chain_group,chain_group_name from chain_info where chain_number =
( select chain_number from customer_info where customer_number = :P4_CUSTMER_NUM);
begin
begin
for i in C1
loop
lv_Chain_List := lv_Chain_List || 'chnsep' || i.chain_group || 'colsep' ||i.Chain_group_name;
end loop;
lv_Chain_List := substr(lv_Chain_list, 7,length(lv_Chain_List));
exception when no_data_found then null;
end;
htp.prn(lv_Chain_List);
-- dbms_output.put_line(lv_Chain_List);
End;
when i execute this PL/SQL code at SQL> prompt I am getting the result( after changing actual value with :P4_customer_num)
When I am running application with alerts in java script the alrts are providing correct select object id and text field values. However I am getting a huge HTML page as result from the request instead of what I am directly getting from SQL ( chain name)
I do not understand the problem
Any help please?
Thanks in advance,
Badari.

Hello,
In the HTML page source you get there should be an error message, just take a look at the source.
And I bet it says something like
No Page or Application Item 'P4_customer_num'
try
ajaxRequest.add('P4_CUSTOMER_NUM',custText.value);
where the item name is in all uppercase.
Also you might want to take a look at this
http://apex.oracle.com/pls/otn/f?p=11933:37
It's already doing what you seem to want to do.
Carl

I am having a strange problems on the Data entry Forms

A form that has been used since 2005 in an old version of HFM 3.51 was migrated to SYstem 11.1.2.1 in January of 2012 and has been working since then. Suddenly we start having some strange problems. Our response time has been very slow and I am wondering if there were some problems in any of the services. Maybe a service did not start properly related to the WEB forms.
We entered a number in one of the cell to be: 348336349 as soon as we hit enter, the number was formatted to 348,336,349 but when I submit the number it came back as 3. I tried it several times and it did not work, I checked the scaling and that was set blank. One of my user tried it and it did not work. I tried looking into the Preferences and my screen froze. In the meantime one of my user was able to enter the number and was able to refresh it as well. Then she enter another number on a different cell and the same problem occurred it seemed as if it truncated all the digits except for the left most digit, we are unable to figure out how to resolve this issue. The number entereed in the cell is 826,251,218 it stores 8 and loses the rest of the 8 digits. I right click and checlk the properties and it says that it has stored 8 instead of 826,251,218.
Following is the DEF script. Does anyone has any ideas, I am wondering if I have to restart the services..
ReportType=WebForm
ReportLabel=Aging_Receivables
ReportDescription=Aging Receivables
Instructions=Please make sure you set up your point of view (POV) appropriately. Business Unit (BU): AG, CE and Other_BU. Brand: Case, NH and Other_Brand.
BackgroundPOV=S#Actual.Y#2011.P#Jan.w#YTD.V#<Entity Currency>.I#[ICP None].C2#SERVICED.C3#GL_INPUT.C4#Input
SelectablePOVList=S{[Hierarchy]}.Y{[Hierarchy]}.P{[Third Generation]}.E{[Hierarchy]}.C1{[Base]}.C2{[Hierarchy]}.C3{[Base]}.C4{GL.[Hierarchy]}
C1=A#Current
C2=A#0_To_30
C3=A#Total_Current
C4=A#31_To_60
C5=A#61_To_90
C6=A#91_To_120
C7=A#121 Plus
C8=A#Total_Past_Due
C9=A#Total_Aging_Rec
C10=A#Current_OffBook
C11=A#Past_Due_OffBook
C12=A#T_Aging_Rec_OffBook
C13=A#Total_MP_Aging_Rec
C14=A#Aging_Rec_Diff
R1=C1#_Retail
R2=C1#_Wholesale_Tot
R3=C1#_Wholesale
R4=C1#_Wholesale_Natl
R5=C1#_Wholesale_Othr
R6=C1#_Credit_Card
R7=C1#_Specialized_Lending
R8=C1#_Marine
R9=C1#_Soris
R10=C1#_Other
R11=C1#_Material
R12=C1#Sup_Product
FormInputBoxLength=23
PrintNumRowsPerPage=33
PrintNumDataColsPerPage=8
ShowLabels=False
ShowDescriptions=True
SuppressColHeaderRepeats=False
Edited by: user8267293 on Aug 8, 2012 12:41 PM
Edited by: user8267293 on Aug 8, 2012 12:43 PM

Hi,
Did you find a way to solve your problem ? We have exactly the same for one application and we are using the same version of HFM : 11.1.2.1.
This problem is only about webforms. We can correctly input data through Data Grids or Client 32.
Thank you in advance for your answer.

Computer slower and a few other strange problems since upgrading to SL

Hi all,
About a month ago, I upgraded my mid-2009 MBP to SL. I'm now on 10.6.1. Ever since the upgrade, my computer's been somewhat slower than it was when I ran Leopard (although many people I know say their machines are faster). I did restart several times at one point, and that seemed to speed it up, although it still experiences delays I didn't have before. I've also had a bunch of strange issues:
1) Safari is most noticeably slow, especially when using something like Top Sites on Safari 4. I alleviated this problem somewhat by setting new tabs to open a blank window rather than Top Sites, but even so, Safari is generally slower, gives me 'pinwheels' often, and also is less stable.
2) The other day, I restarted to find that all fonts except system fonts had been mysteriously deactivated. As a designer, I rely heavily on my many fonts, which I manage using Linotype FontExplorer.
3) Today, I opened my computer up after having it sleeping in a backpack, and it had turned off. It was not out of battery; it had just turned off for no apparent reason.
4) Judging by Activity Monitor, RAM is being used somewhat more heavily by the system, contrary to the advertisements of a 'lighter' footprint for SL as compared to Leopard. However, according to Activity Monitor (which I check frequently), the processor does not appear to be getting taxed any more heavily than under Leopard, which makes the sluggishness more inexplicable.
5) Yesterday, I could not get my computer to recognize my Time Machine backup disc. After restarting, it worked, but this is a pain.
I appreciate any advice I can get. Does anyone else have similar problems or solutions? Or is the general consensus that these are SL bugs that Apple will work out by about 10.6.4 or so?
Thanks,
Nathan
Message was edited by: nateeanes

I began this thread awhile ago, but the essence of it is that I had a number of strange problems, although mostly my computer was just slower, when upgrading from Leo to SL.
I've now wiped my HD and re-installed SL. It seems faster, although there are still a few issues:
1) iWork (Pages, Numbers) has very weird coloring. All the text looks light blue and/or cyan, and I can't fix it.
2) Although initially Safari worked great, lately it's been going back to its habits of being slow and showing strange things like chopping up the 'Top Sites' view, i.e. rendering it in an off way.
3) Adobe CS3 will not install properly. I get them loaded up, but when I try to launch a program, I get an error that says "licensing for this product has stopped working". I cannot get to the 'activate' page, even though I uninstalled and deactivated CS3.
In the interest of full disclosure, I did restore my home account after clean installing SL-- maybe I should have brought the files over folder by folder rather than bringing back my whole home folder with its settings? I wonder if I accidentally brought over Adobe's FLEXnet folder too.
Also, does anyone know if Adobe CS3 can cause these problems with Safari and other programs? It just seems that the whole machine was slower after installing CS3, even though I wasn't running the programs.
Any help is appreciated.
Nate

Strange Problem in dynamically list population with record group

Hello Room,
I am dynamically populating a single list with 2 record groups. I am having a strange problem. All the code are written in 2 seperate buttons. The code of every button is given below.
Button 1 code:-
DECLARE
rg_reports RECORDGROUP;
rg_name VARCHAR2(40) := 'REPORTS';
vTemp NUMBER;
BEGIN
-- Pls make sure Group doesn't already exist
rg_reports := FIND_GROUP(rg_name);
-- If it doesn't exist then create it and add ur query to it
IF Id_Null (rg_reports) THEN
rg_reports:=CREATE_GROUP_FROM_QUERY(rg_name , 'SELECT companyname,to_char(co) from companymaster order by companyname');
end if;
--Populate the Record Group
vTemp:=POPULATE_GROUP(rg_reports);
POPULATE_LIST('REPORTS.EXAMPLELIST', rg_name);
Delete_Group( rg_reports );
END;
Button 2 Code:-
DECLARE
rg_reports RECORDGROUP;
rg_name VARCHAR2(40) := 'REPORTS';
vTemp NUMBER;
BEGIN
-- Pls make sure Group doesn't already exist
rg_reports := FIND_GROUP(rg_name);
-- If it doesn't exist then create it and add ur query to it
IF Id_Null (rg_reports) THEN
rg_reports:=CREATE_GROUP_FROM_QUERY(rg_name , 'SELECT accountname,to_char(co) from accountmaster order by accountname');
end if;
--Populate the Record Group
vTemp:=POPULATE_GROUP(rg_reports);
POPULATE_LIST('REPORTS.EXAMPLELIST', rg_name);
Delete_Group( rg_reports );
END;
The code is same here only the sql is different in these 2 buttons. Now the problem point.
when i press button 1, I get the list populated ok. when i try to click on the list item and keep the button pressed the list gets scrolled properly.
when i press button 2 after that i get account names well populated in the same list item as well, but this time, when i keep the button pressed the list does not scroll below as in button 1. It does not even allow to select different item from the list of button 2 code.
I tried to clear cache, cookies, exit browser everything and try to run the button 2 first, but still the problem in button 2 code.
Following are my system details.
windows 7 professional edition.
Oracle database 11g on windows 7
Oracle forms 10g patchset 10.1.2.0.2 on windows 7
Browser Netscape Navigator with oracle jinitiator 1.3.1.22
But this form is run by a client side html file where oracle forms 10g is not installed on windows xp. html file is just referring server url to run the module. The file is run on Netscape navigator browser with oracle jinitiator 1.3.1.22
My question is that is this a bug ? if button 1 gets the list item scrolled, why is the problem with button 2 even though i press it first. Here I am deleting the record group also. after the code is over. Initially I thought this may be the character length problem so I took the maximum character length for that list item as given by the 2 columns in database.
Why is the list scrolling not happening in button 2 but in button 1 with same codes on both ?
Anybody please help me.

The problem is the second query. I would guess that the TO_CHAR(co) is not unique for each account, but is the same for the accounts. And as the second item in the select-list is the listitems values, all your listitem-entries have the same value. therefore, of you select any entry, the list will always go the the first entry again.
Adjust your query.

Strange problem while clearing a customer

Hi everybody
I am encountering this strange problem while trying to clear some open items for certain customers. Though these customers have open items on them (checked in BSID and FBL5N), the system is giving a warning message saying that there are no open items on the customers while trying F-30 and F-32.
The only thing that was different for these customers from the rest was that these customers had some transactions which were supposed to be cleared through AP payment run. (transactions for customer payment).
Can anybody explain why the system was not considering these line items as open while accessing F-30 and F-32??

Hi,
- check SAP Note 136754
some table fields in the missing documents using Transaction SE16. The following conditions must exist:
BSIS-XOPVW = X      (Indicator: Open item management, only for G/L                     accounts)
BSEG-XOPVW = X      (Indicator: Open item management)
BSEG-AUGBL = space (clearing document number)
BSEG-DISBN = space (discount document number)
BKPF-BSTAT = space (document status)
BKPF-XSTOV = space (indicator reversal flag)
REGUS/REGUP -> see below
Should one or more conditions not exist, please note the following information:
1. BSEG-XOPVW <> X or BSIS-XOPVW <> X for G/L account line items:
              The line item presumably comes from a time before you activated the open item management of a G/L account. Documents before this master record change do not contain this technical information. Use report RFSEPA02 if you want to bring the documents in line with the new master record. You must refer to the documentation of this report.
              Because there may be problems subsequently acivating open item management, RFSEPA02 was changed as of Release 4.5A so that it cannot be started without modifications. SAP wants to make sure you are familiar with the problems, which may result from activating open item management. You can however restart RFSEPA02 when you have deactivated the line:
              leave program.
2. BSEG-XOPVW <> X for open item account line items:
              This data status is not allowed. Contact the SAP Hotline.
3. BSEG-DISBN <> space.
              The line item has already been used within bill of exchange accounting.
4. BKPF-BSTAT <> space.
              This is a document with a special function, for example a sample document or recurring entry document. Generally these are not taken into account in clearing transactions.
5. BKPF-XSTOV <> space.
              The document was flagged for reversal. Only if you cancel the reversal flag, can you clear the document again. You can do this by removing the planned date for the reverse posting (BKPF-STODT) in the document header using Transaction FB02 (Change document).
6. REGUS/REGUP:
              Look at table REGUS using Transaction SE16. Enter the account (KONKO) in the selection screen. If you selected an entry, use the information Run date (LAUFD) and Identification (LAUFI) in Transaction F110 (payment program). Check the status of the payment run. If only the proposal was carried out, the documents proposed for payment are blocked for other clearing transactions. It is only when you delete the proposal run that the items are taken into account again in the clearing transaction.
Rgds.

Strange problem with Adobe Acrobat X (crash without a trace)

Hi,
I have a strange problem with Adobe Acrobat. It happens totally randomly, it leaves no signs in system logs.
What is happening: during my work Adobe Acrobat sudennly crashes. After a crash I cannot run it again - system seems to do something for a second, but then nothing happends. When i look into taks manager - there are no processes of Acrobat.exe. It just doesn't want to run. What I need to do is to reinstall whole Adobe Acrobat - which requires restart.
I've already tried to restart system after crash, it doesn't help - reinstall is required.
Sometimes everyting is fine for a 3 months, sometimes crash happens a week after the previous one. It also happens in very different situations (somtimes while opening a file, sometimes when doing something simple, sometimes in more complex tasks).
Has anyone encountered a similar problem?
Acrobat version: 10.1.1
System info: Windows 7 64 bit

Hi Kelvin,
Please let me know what OS version you are using.
The error also shows OS requirements not met.
Futher please try the steps below :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Also see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
Regards,
Rave

Strange problem in PS CS4 32-bit only

I'm having a rather odd problem and haven't been able to find any discussions of something similar. I'm running Windows Vista Ultimate 64 SP1. I have both the 32- and 64-bit versions of PS CS4 installed with the latest updates.
64-bit PS works like a champ. I love it. Were it not for a variety of plug-ins I use which are not yet 64-bit enabled, I would never use the 32-bit version of PS. However...
When running 32-bit PS, the program acts as though I have some key or mouse button either pressed or like I'm repeatedly pressing a key. Sort of. It doesn't try to do something on its own - that is, if I open a file and sit here doing nothing, PS won't do anything on its own. I will, though, see the cursor flashing oddly.
If I attempt to do anything, I end up fighting with the "phantom" keys. Sometimes, I need to press a key several times before it reacts. Often, I'll get warning sounds like you hear when you press a wrong key for a particular state. Certain actions won't hold sufficiently long to let me do something. I just ran into a stubborn problem like this. If I click the crop tool, I cannot type into the width, height, or resolution boxes on the tool bar. I can click there, see a vertical cursor appear for an instant, then it's gone.
This is driving me nuts. I wish my plug-in vendors would get their acts together and add 64-bit compatibility, but so far only Imaginomic has done so with Noiseware (and I'm grateful to them!).
Other info: I'm running with a bluetooth mouse and keyboard as well as an Intuous 3 tablet. I have an nVidea GeForce 8600 GT video card. I've tried disabling OpenGL in PS without help. Note again, 64-bit PS works brilliantly with all these. I'm running plug-ins from OnOne (Plugin Suite 4) and Nik (Viveza) as well as Noiseware mentioned above. I tried logging in with my wife's ID to see if any of my settings might be to blame, but it behaves the same with her ID. I'm not sure if this problem showed up with the PS update or if it was there from the start. I'm thinking it did not show this problem when I first upgraded to CS4. I was using CS2 previously, and it's still installed on this computer. It does not exhibit this problem.
Any ideas or suggestions?
Tony

Mylenium - thanks. I also was suspicious of the tablet, but the tablet is not in use when this problem shows up. Nevertheless, I uninstalled the Wacom driver, removed the tablet connection, rebooted, and the problem persists. But, I did get a chance to install a new version of the driver (April 2009).
Like I said - strange problem. Since it doesn't crash PS, there's not much data. No error message, no stack trace.
One other tidbit. I still have the crop tool selected. If I load an image and place the cursor over the image window, the cursor changes between the crop cursor and the big white arrow. Back and forth. When it's doing this, if you want to use the selected tool, you have to click right when the tool's cursor is showing, otherwise you get the "bing" noise.

Strange problem running 2x instead of 4x GF4TI4200 VTD8X vivo

Similar Messages

Maybe you are looking for