Strange problem with Audition 3.0 - Tracks Load, but don't appear, no tracks listed?

I've a collection of 15 songs I've been working on.
A few weeks ago, I loaded one of the sessions, only to find that the progress bar showed the loading of each track as normal, but there was no track data visible once the session opened!
Fortunately, I kept a back up, and transferred this over. However, now the backup has done the same thing, and I've done work on it since and don't want to have to go back to the old back up again.
What's weird is that, the files are all there listed in the directory, and appear to load, the session attributes and settings are all the same, but just no audio tracks are visible.
I'm sure there must be a way of recovering this, but I don't know what it is.
I've deleted the cache, which didn't help. I've copied the directory somewhere else, and back over again. - but no luck.
Any ideas?
Pic 1 and 2 show the loading process (i.e. it's definately loading something from somewhere)
https://dl.dropboxusercontent.com/u/106948279/adobe%20problem/1.jpg
https://dl.dropboxusercontent.com/u/106948279/adobe%20problem/2.jpg
Pic 3 shows, the session, with nothing in it!
https://dl.dropboxusercontent.com/u/106948279/adobe%20problem/3.jpg
Pic 4 shows how the session should look, and 5 shows where all the files are.
https://dl.dropboxusercontent.com/u/106948279/adobe%20problem/4.jpg
https://dl.dropboxusercontent.com/u/106948279/adobe%20problem/5.jpg
Please help me solve this, this project is so close to finishing and this problem is really annoying me.

Still haven't solved this, even the backup no longer works...Would anyone be interested in helping me by letting me send them a project, making one simple change for me, then saving the project, returning it to me and exporting it as wav?
this would help me tremendously...
let
me
know
if
u
can
help
anyone be interested in helping Mr

Similar Messages

Redgiant Universe 1.3 effects load into Premiere Pro CC 2014 but don't appear in FX list

Anyone else having this problem? Until yesterday I had the RedGiant Universe plugins working happily in CC2014 as a trial, but then I upgraded to a paid version. The plugins in my edit were still applied but no longer functioned. So I did what I thought was the reasonable thing, and re-installed the plugins. Now they show as loading at startup, but don't appear in the Premiere effects list, and give a 'not present' warning when loading the project. I initially thought that maybe the new Nvidia graphics driver had caused a problem, but reverting to an earlier system config didn't help...
If anyone has any ideas I'd love to hear them! Install is on Win7 64 running on an i7 PC with 24gb RAM and an Nvidia GTX570.
cheers
Scot

Hi Scot.
I had the same problem with paid version of Denoiser.
I downloaded the whole package again from the website and installed Denoiser only and it appeared.
It's possible that there was newer version online when I downloaded it, I didn't check numbers.
It's free to download a new version. As long as your key still works, you are legal. Maybe try installing couple of times.
Have fun!

Strange problem with Transformations Mapping

Hi All,
I am facing a strange problem with respect to the data loading to ods from data source.
I have mapped a field, Number of days which is the difference between posting date and payment date (field in ECC, length char 5) mapped to characteristic zdate_1 length 5 without alpha conversion. (Date difference is calculated in ECC)
When I load data in production it is not fetching the records from PSA (Values exist for this field in PSA).
I have 90 fields in datasource whichbring data to PSA.
Same is working perfectly in Quality and Dev servers.
Where could the problem be?
Please suggest a solution.
Regards
Joga

Any Ideas...

Steps to troubleshoot and get past common problems with Audition

When you encounter a problem with Audition, the following steps are often useful for getting past the problem and/or determining the cause of the problem:
1. Hold down SHIFT while you launch Audition
 This overrides the preference files and launches Audition using the default settings.
2. Manually rename or delete the preferences folder
 Step 1 only overrides certain preference files, while others such as Workspace preference files, may be the cause of the problem. Depending on your OS, locate the "5.0" folder in the location below and rename it or delete it.
 Windows XP: C:\Document and Settings\<username>\Application Data\Adobe\Audition\5.0\
 Windows Vista/7: C:\Users\<username>\AppData\Roaming\Adobe\Audition\5.0\ *
 Mac OS X: ~\Library\Preferences\Adobe\Audition\5.0\ **
 * "AppData" may be a hidden folder. You can type it into the location bar, or enable "Show Hidden Files" in Windows.
 ** This is your user-level Library folder, not the system-level tree.
3. Check your Audition Log.txt file
 To enable a log file with CS 5.5, you must create an empty file in your preferences folder called "Audition Log.txt" using notepad, text edit, or any other editor. After you create this file, launch Audition and if it fails, open and/or share the log file for more specific information about what's happening.
4. Check the Operating System console or error log
 Both OS X and Windows can track application errors, and if the problem is occurring outside of the application code - a driver conflict, for example - then the OS error report may be more informative than what we can get from the application.
 OS X: launch /Applications/Utilities/Console.app Clear the view, then launch Audition and note any error messages that appear.
 Windows: launch Control Panel > Administrative Tools > Event Viewer > Windows Logs > Application then launch Audition and note any error messages that appear.
5. Re-install Audition
 If at this point, nothing has resolved the issue or the error logs are inconclusive, it's a good time to uninstall Audition, reboot, and reinstall Audition.
6. Obtain the full crash dump and send it to the Adobe team
 So you've walked through all the above steps, you've disconnected any external hardware interfaces to rule out any device or driver conflicts, and you've exhausted the basic troubleshooting steps. Visit http://forums.adobe.com/thread/900619 and follow the steps for your OS that Charles has documented to best obtain a full crash memory dump for Audition, and send that to [email protected] with a description of the problem and the steps you've taken, and we'll take a look.

Firstly yes these are common problems and secondly hopefully they will be fixed with updated software 2.1 which is due for release this coming Firday!

Strange problem with the mail app on an iPad

I've got a bit of a strange problem with the mail app on an iPad - it's sending and receiving mail ok but won't let you delete mail. If you keep at it, it appears as if you have deleted mail (though takes a very long time as you just have to keep deleting it over and over again) - but the size of the app still keeps going up - reached 600mb so far, even though there is hardly any mail or attachments (goes up quite a lot each time you try to delete anything) - any idea what's causing this and how I can fix it?
It occasionally comes up with a dialogue panel saying to check my account settings, but I have checked those and they are fine. The little 'loading' icon just keeps spinning constantly too.

go to Settings > Mail > your account > Advanced > Move Discarded Messages Into
and make sure that Deleted Mailbox is ticked, and not Archive Mailbox
You can also adjust how long the deleted mail stays in the trash immediately below that.
If you are talking about a gmail account, you may also have to login to your account on the gmail server and update the settings there. This is what Barney previously posted about that:

Strange problem with desktop

Hi, I have a very strange problem with desktops and dashboards something else. For example, when I am on desktop 2 and i go to desktop 1, when I click with the mouse on it, it goes again to desktop 2. or when I am on desktop 1 and I go to ddashboard, it returns again to desktop 1 when i click to something in the dashboard.
but, if i am on desktop 3, and i go to desktop 1 throguh desktop 2, there is no problem. the same if i go from desktop 2 to dashboard.
I hope i've been clear enough to let you understand this... explanation =P
Anyone can help?

My system has started "freezing". Actually, usually when I'm browsing the net, Chromium stops loading pages. Conky stops updating, and usually I can't switch to another programs. I can't start xkill from menu, menu opens but nothing starts. If I run "ls" etc in Terminal, nothing happens
I can however control+alt+F1 to CLI, but if I try to login nothing happens.If doesn't help even if I kill X (I started it with startx). And if I don't kill X, I can't go back from CLI with control+alt+F7, there's just a black screen.
I'm using Nvidia drivers also, and XFCE4. This started happening some time ago, I think I was using Gnome2 back then. And I have updated my system, and this has happened at least with 3 kernel versions. There's nothing on logs. Well, actually, there's "TCP: Possible SYN flooding on port 6881. Sending cookies" errors on everything.log. But those don't happen when system freezes. And sometimes Chromium stops loading pages but other programs don't freeze, I think it's a problem with cache or something.
Not really sure if this everything happens because of Chromium. I think I'm gonna switch back to Firefox and see what happens. Usually I'm running Chromium, Opera (use it just for a couple of pages), couple of Terminals and Kaffeine.

Strange problem with connection to Integrator Server

Hi,
I have a strange problem with making a connection to my Integrator Server.
I have one workspace folder that I share between Integrator version 2.4 and 3.0 (I have several versions installed for testing purposes)
When I try to create a new Integrator Server Project in Integrator Designer I get this nice 'Connect to CloverETL Server' panel.
By default: the connection URL is http://localhost:8080/clover. So by default Integrator Designer wants to connect to my 2.4 Integrator Server.
When I change this to http://localhost:8301/clover by using the drop-down box and fill in my credentials everything is looking fine. I click Next.
The problem now is that every time I switch to the next or previous configuration windows the connection is reset to the default http://localhost:8080/clover.
So it seems like Integrator Designer resets the CloverETL Server URL each time I switch to a different configuration window by using NEXT or BACK.
The problem occurs in both versions of Integrator Designer.
Does anybody know that the problem is? Can I change the default URL to my 3.0 Integrator Server?
Greetings,
Marcow
Edited by: Marco Snels (AortaBI)(NL) on 31-mei-2013 4:59

I'm using iPlanet App server as well and experiencing similar problem. I load my SQL Server driver by Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver"), then use DriverManager.getDriver() to obtain the Driver.
However, the Driver returned is not the SQLServerDriver as expected. The Driver returned is com.netscape.server.jdbc.Driver! And then when I do Driver.getConnection("jdbc:microsoft:sqlserver://MyServer"), it throws an SQLException saying that it doesn't accept a jdbc:microsoft:sqlserver subprotocol. Well, of course it doesn't, it's not a microsoft Driver at all.
I suspect the problem is that the netscape Driver's acceptsURL() method ALWAYS returns true in iPlanet app server, thus when you getDriver(), the netscape Driver is always returned (and always returned as the first one since it's default?). Thus even though the same piece of code works fine as a standalone application, it just doesn't work on iPlanet app server.
My work around is:
Class.forName("my.Driver");
Enumeration enu = DriverManager.getDrivers();
Driver useThis = null;
while (enu.hasMoreElements()) {
Driver d = (Driver)enu.nextElement();
if (d.getClass().toString().indexOf("my.Driver") > -1) {
useThis = d;
Mind that my above code does not have an performance issue. If you look into the source code of how DriverManager get a Driver for a particular URL, it also loads the whole set of available Drivers, then call acceptsURL() method on each of them to find the first "suitable" one. Thus time complexity is the same.
I know this is not a very elegant solution and it defeats the purpose of having a DriverManager. Does any one else has a better way to solve this problem, like a way to specify the priority of each Driver so that SQLServerDriver is returned before the netscape Driver?
Thanks a lot.

Strange problem with P35 Neo

Hi there.
Got a strange problem with a computer that got a P35 Neo system board.
The problem I got, is that the computer don't boot. If I reset the CMOS,
I can get the computer to boot, but then it hungs on loading Vista.
Then I try to repair my Vista. Then the computer hungs while loading the DVD.
I have tried to boot with only one RAM in the computer, but the problem still
there...
I have tried to reset the CMOS by changing the JPBAT (I think it called so) jumper
and to pull out the battery.
I have tried to disconnect all, but one HDD and but I can't say that it worked any
better...
Any ideas how to find out the error?
2 x 2 GB Corsair RAM
Intel dual Core CPU
Radeon 1950 PCI-E
1 Samsung SATA HDD
2 Seagate SATA HDD

Quote from: BOSSKILLER on 25-August-08, 20:31:15
What PSU you have? Corsair Powersupply 550W Black, ATX/EPS
Provide better details about memory sticks used. Corsair TWIN2X 6400C4DHX DDR2
What CPU? Intel Core 2 Quad Q6600 2.4 GHz
BIOS version onboard? Note sure, since I'm not right at the computer for the moment. But I think it's 1.0 since it is brand new from store.
Do memory check with >>Memtest86<< Well, it's kind of difficult, since the computer dont boot.

Strange Problem with Code Groups / Codes

Hey all, have a strange problem with Code Groups and Codes.
Our data migration team accidentally loaded an early version of our catalog (code groups and codes) in to our 'Gold' configuration client. They then proceed to delete them all via transaction qs41. However, the code groups have been deleted, but not the codes.
So, basically, no codes groups exist in table QPGR or QPGT but all the entries remain in QPCD with the assigment to code groups. The usage indicator is not set on the codes so why they did not get deleted with the codes groups is unknown.
The issue that this is now causing us is that we can't recreate the codes groups with these codes assigned as the system thinks they already exist (via a check on table QPCD i would expect).
Also, i have been unable to recreate what happened did in other clients... seems very strange.
Any help appreciated.
Cheers

Ben,
You could try SE11, and see if you can delete the records from there.. but I'm not hopeful...
Otherwise you may need to write a quick ABAP program to delete the data base entries.
PeteA

[Solved] Strange problem with my '/home/evert/Music' folder

Good evening everybody,
I'm having since a few weeks some very strange problems with one directory on my hard disk: '/home/evert/Music/'.
The problem is that this directory excists, with all it's subfolders. But i can't see a single file (mostly mp3's) in that folder or subfolders.
Some more background information to make sure i'm not doing something wrong :
http://pastebin.be/4419 : the log file of a 'mpd --create-db' command. This clearly shows that mpd fills his database with the music. And even more, i'm able to play all that music.
evert@localhost ~/Music $ du --max-depth=1 -h -c | tail -n 1
15G total
So this folder really excists and is filled with a lot of music files normally .
evert@localhost ~/Music/Metallica/loaded $ ls -a
Strange ? In this folder really was music acording to the mpd --create-db log file ?!
drwxr-xr-x 161 evert users 8192 2007-08-10 17:57 Music
As user i'm having all rights to this folder, so that isn't the fault.
Even when trying to see the files, neither konq in su mode or MC works.
Anybody who knows something more about this problem or could help me a bith further pls ? I'm running XFS as filesystem on this partition.
Thanks in advance,
Evert
Last edited by evert_ (2007-08-13 19:23:36)

MrWeatherbee wrote:
shining wrote:You don't have anything in ~/Music/Metallica/loaded but you have stuff in ~/Music/Music/Metallica/loaded
It's really an awful mess, I would suggest you clean your music folders.
Shall he clean his room, too?
If his home is as messy as his $HOME, then yes, totally.

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

Strange problem with Adobe Acrobat X (crash without a trace)

Hi,
I have a strange problem with Adobe Acrobat. It happens totally randomly, it leaves no signs in system logs.
What is happening: during my work Adobe Acrobat sudennly crashes. After a crash I cannot run it again - system seems to do something for a second, but then nothing happends. When i look into taks manager - there are no processes of Acrobat.exe. It just doesn't want to run. What I need to do is to reinstall whole Adobe Acrobat - which requires restart.
I've already tried to restart system after crash, it doesn't help - reinstall is required.
Sometimes everyting is fine for a 3 months, sometimes crash happens a week after the previous one. It also happens in very different situations (somtimes while opening a file, sometimes when doing something simple, sometimes in more complex tasks).
Has anyone encountered a similar problem?
Acrobat version: 10.1.1
System info: Windows 7 64 bit

Hi Kelvin,
Please let me know what OS version you are using.
The error also shows OS requirements not met.
Futher please try the steps below :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Also see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
Regards,
Rave

Strange problem with Subviews on 1.0 Beta

Hi,
I'm having a strange problem with SubViews on 1.0 Beta. I'm not sure If I'm being stupid and have done something wrong, or if there's a problem here.
My application is directly based on one of the examples, so the structure etc is almost identical. I've simplified the files below to avoid confusing the issue.
The default landing page (greeting.jsp) looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<HTML>
<HEAD><title>Insulation Layer Demo</title></HEAD>
<body bgcolor="white">
<f:view>
<jsp:include page="sysstatus.jsp" />

</f:view>
</body>
</HTML>
sysstatus.jsp looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<f:subview id="SystemStatusView">
<h:form id="systemStatusForm">
<h:selectboolean_checkbox id="System1Available" value="#{SystemStatus.system1Available}"/>System 1 
<h:selectboolean_checkbox id="System2Available" value="#{SystemStatus.system2Available}"/>System 2
<h:command_button id="submit" action="success" value="submit" />
</h:form>
</f:subview>When I view this page, the checkboxes all seem to work okay (in that their state is preserved across calls etc), but the formatting is very screwy. The resulting page looks something like:
<chkbox1> <chkbox2> <Submit>
System 1
System 2
<Other HTML content from greeting.jsp>When I look at the HTML source code being generated, it is genuinly being generated as above, that is, all the form tags first, and then the rest of the content. Interestinly, I tried adding a ${SystemStatus.system2Available} into the body text, and it was rendered as literal text (i.e. not evaluated as EL), which is very curious -- makes me wonder if the included file is included as text, rather than JSP, although the custom taglibs and <f:form> tags etc are not in the generated HTML.
If I lift all the content between the <h:form> tags (inclusive) out of sysstatus.jsp and put it in greeting.jsp in place of the <jsp:include> tag, all is well.
Any ideas? All help gratefully recieved!
Thanks,
Paul

Personally, I think it is a bug in the rendering model of JSF itself because if you include any non-JSF tags, they don't get rendered according to my understanding of the what the spec says (in the location the tags are written).
The only workaround that I could come up with is to use straight JSF tags in all of your layers. Things are then rendered the way that they "should" be rendered.
You could try wrapping all of your HTML tags in <f:verbatim> tags and see if that helps.
Good luck!
David

Strange problem with ACLs

Hi,
I have just migrated an oracle database from 11.1.0.7 on Win Server 2003 to 11.2 on Linux 64 bit. I am having a strange problem with ACLs - I can create the ACL but when I perform either of the following two commands:
SELECT * FROM DBA_NETWORK_ACLS
or
SELECT * FROM NET$_ACL
I get no rows returned. The ACL exists somehow because if I try and create it again I get the error that it exists. Has anyone got any advice here? Something is out of sync and I need to know how to fix it up.
Thanks
Adam

BEGIN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
acl => 'email_server_acl.xml',
description => 'Network connection Email Server',
principal => 'MAIL',
is_grant => TRUE,
privilege => 'connect');
END;
PL/SQL procedure successfully completed.
select * from DBA_NETWORK_ACLS;
(no rows)
BEGIN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
acl => 'email_server_acl.xml',
description => 'Network connection Email Server',
principal => 'MAIL',
is_grant => TRUE,
privilege => 'connect');
END;
ORA-31003: Parent /sys/acls/ already contains child entry email_server_acl.xml
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 252
ORA-06512: at line 2
Edited by: Adam J. Sawyer on 15/04/2011 17:08

Some strange problem with Flash/As3

Hi,
I am having some strange problem with my flash cs3.
Whatever script I write in as3 doesn't work, even a stop() function doesn't work . But when I change my publish setting to as2 it works fine.
Not sure about the root cause, may be some setting or preference or my cs3 is corrupted.
Can anybody please advise.
Thanks,
Kishor

try this
create a new fla as3,
select frame 1
open the actions panel
paste in the following code
var squares:Array = new Array;
setup();
function setup():void {
 for (var i = 0; i < 25; i++) {
 var square:Sprite = new Sprite();
 //square.name = "square" + i;
 square.graphics.beginFill(Math.random() * 0xffffff);
 squares.push(square);
 squares[i].graphics.drawRect(0, 0, 100, 100);
 squares[i].x = i*3;
 squares[i].y = i*3;
 squares[i].filters = [];
 square.graphics.endFill();
 stage.addChild(squares[i]);
for (var j = 0; j < squares.length; j++) {
 squares[j].addEventListener(MouseEvent.MOUSE_DOWN, dragMovie);
 squares[j].addEventListener(MouseEvent.MOUSE_UP, dropMovie);
 squares[j].buttonMode = true;
function dragMovie(event:MouseEvent):void {
 event.target.startDrag();
function dropMovie(event:MouseEvent):void {
 event.target.stopDrag();

Strange problem with Audition 3.0 - Tracks Load, but don't appear, no tracks listed?

Similar Messages

Maybe you are looking for