Strange problem with broadband. Speed very low.

Hi all,
From last Friday I encountered really big problems with my broadband as the speed go dramatically down. I don't know what may be the reason, I'm using HomeHub and between it and computers in my household everything is fine. I haven't heard about any fixes round Aberdeen so have completely no clue what is going on.
Do you have any clue what can cause the problem, for more than 3 years everything was just great. Maybe my HomeHub is old and faulty, it is the 1st gen, white one.
I post speedtest results and ADSL info:
Download speedachieved during the test was - 134 Kbps
For your connection, the acceptable range of speedsis 4000-21000 Kbps.
Additional Information:
Your DSL Connection Rate :18761 Kbps(DOWN-STREAM), 888 Kbps(UP-STREAM)
IP Profile for your line is - 16000 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 0.0:75.22:25.5 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
Upload speed achieved during the test was - 692 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 888 Kbps
DSL Connection
Link Information
Uptime:
3 days, 22:26:20
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
888 / 18,762
Data Transferred (Sent/Received) [MB/GB]:
350.53 / 4.65
Output Power (Up/Down) [dBm]:
11.5 / 0.0
Line Attenuation (Up/Down) [dB]:
4.5 / 14.0
SN Margin (Up/Down) [dB]:
15.0 / 5.0
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
0 / 0
FEC Errors (Up/Down):
0 / 246,017
CRC Errors (Up/Down):
0 / 46
HEC Errors (Up/Down):
0 / 39
Line Profile:
Fast
Solved!
Go to Solution.

Update.
First, do you always get reply from MODS? Today my connection dropped and after a while it was on again, I found my SN Margin reset to 6.5 and better bandwith 1205 / 19832 but the speed didn't improve at all. It is 24h since I've sent notice to MODS and I will wait another 24h before contacting them again. What really worries me is FEC Errors field in my ADSL Line details. Last time after 4 days it was 245'000, now after 6 hours I have more than 750'000. Is that normal after connection drop? I've checked speed using this speedcheck provided and my profile is still the same, 16000kbs
UPDATE:: 40 minutes past, 35 MB more dowloaded and 100'000 FEC Errors more :/
I paste details below:
DSL Connection
Link Information
Uptime:
0 days, 6:01:26
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
1,205 / 19,832
Data Transferred (Sent/Received) [MB/MB]:
38.53 / 275.66
Output Power (Up/Down) [dBm]:
12.0 / 0.0
Line Attenuation (Up/Down) [dB]:
4.5 / 14.0
SN Margin (Up/Down) [dB]:
6.5 / 4.0
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
1 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
1 / 0
FEC Errors (Up/Down):
0 / 769,697
CRC Errors (Up/Down):
0 / 8
HEC Errors (Up/Down):
0 / 5
Line Profile:
Fast

Similar Messages

Re: Strange problem with broadband. Speed very low...

What is going on with my BT Broadband speed...?
Download 0.25 Mbs and up load of 0.09 mbs..
This just can't be right...?
Frustrated subscriber.. Glenn :-(

I moved you post to start a new thread as previous one was marked as solved by originator
welcome to the BT community forum where customers help customers and only BT employees are the forum mods
in order for the forum members to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems). when first test completes then run diagnostic test and post the results .
are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I have very strange problem with Iphone 3gs. Whenever it gets little hot or exposed to 30 degree temperature it losses signals (No service). Whenever it is cooled down the service is back. Please help!

I have very strange problem with iphone 3gs. Whenever it gets little hot or exposed to 30 degree or above temperature it losses signals (No service). Whenever it is cooled down the service is back. Whenever I am using Skype or playing game for a while it losses carrier signals and wifi. When it is cooled down afer shutting down the carrier signals and wifi are back. It is for sure problem is with heating, but 30 degree tempeature in Oman is normal and some time it goes upto 50 degrees. I have noticed this has started after I started using substandard charger as I lost my original charger of the phone. Please help!! Thanx.

The specifications define an operating range up to 35 degrees.

Strange problem with Adobe Acrobat X (crash without a trace)

Hi,
I have a strange problem with Adobe Acrobat. It happens totally randomly, it leaves no signs in system logs.
What is happening: during my work Adobe Acrobat sudennly crashes. After a crash I cannot run it again - system seems to do something for a second, but then nothing happends. When i look into taks manager - there are no processes of Acrobat.exe. It just doesn't want to run. What I need to do is to reinstall whole Adobe Acrobat - which requires restart.
I've already tried to restart system after crash, it doesn't help - reinstall is required.
Sometimes everyting is fine for a 3 months, sometimes crash happens a week after the previous one. It also happens in very different situations (somtimes while opening a file, sometimes when doing something simple, sometimes in more complex tasks).
Has anyone encountered a similar problem?
Acrobat version: 10.1.1
System info: Windows 7 64 bit

Hi Kelvin,
Please let me know what OS version you are using.
The error also shows OS requirements not met.
Futher please try the steps below :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Also see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
Regards,
Rave

Strange problem with Subviews on 1.0 Beta

Hi,
I'm having a strange problem with SubViews on 1.0 Beta. I'm not sure If I'm being stupid and have done something wrong, or if there's a problem here.
My application is directly based on one of the examples, so the structure etc is almost identical. I've simplified the files below to avoid confusing the issue.
The default landing page (greeting.jsp) looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<HTML>
<HEAD><title>Insulation Layer Demo</title></HEAD>
<body bgcolor="white">
<f:view>
<jsp:include page="sysstatus.jsp" />

</f:view>
</body>
</HTML>
sysstatus.jsp looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<f:subview id="SystemStatusView">
<h:form id="systemStatusForm">
<h:selectboolean_checkbox id="System1Available" value="#{SystemStatus.system1Available}"/>System 1 
<h:selectboolean_checkbox id="System2Available" value="#{SystemStatus.system2Available}"/>System 2
<h:command_button id="submit" action="success" value="submit" />
</h:form>
</f:subview>When I view this page, the checkboxes all seem to work okay (in that their state is preserved across calls etc), but the formatting is very screwy. The resulting page looks something like:
<chkbox1> <chkbox2> <Submit>
System 1
System 2
<Other HTML content from greeting.jsp>When I look at the HTML source code being generated, it is genuinly being generated as above, that is, all the form tags first, and then the rest of the content. Interestinly, I tried adding a ${SystemStatus.system2Available} into the body text, and it was rendered as literal text (i.e. not evaluated as EL), which is very curious -- makes me wonder if the included file is included as text, rather than JSP, although the custom taglibs and <f:form> tags etc are not in the generated HTML.
If I lift all the content between the <h:form> tags (inclusive) out of sysstatus.jsp and put it in greeting.jsp in place of the <jsp:include> tag, all is well.
Any ideas? All help gratefully recieved!
Thanks,
Paul

Personally, I think it is a bug in the rendering model of JSF itself because if you include any non-JSF tags, they don't get rendered according to my understanding of the what the spec says (in the location the tags are written).
The only workaround that I could come up with is to use straight JSF tags in all of your layers. Things are then rendered the way that they "should" be rendered.
You could try wrapping all of your HTML tags in <f:verbatim> tags and see if that helps.
Good luck!
David

Strange problem with the mail app on an iPad

I've got a bit of a strange problem with the mail app on an iPad - it's sending and receiving mail ok but won't let you delete mail. If you keep at it, it appears as if you have deleted mail (though takes a very long time as you just have to keep deleting it over and over again) - but the size of the app still keeps going up - reached 600mb so far, even though there is hardly any mail or attachments (goes up quite a lot each time you try to delete anything) - any idea what's causing this and how I can fix it?
It occasionally comes up with a dialogue panel saying to check my account settings, but I have checked those and they are fine. The little 'loading' icon just keeps spinning constantly too.

go to Settings > Mail > your account > Advanced > Move Discarded Messages Into
and make sure that Deleted Mailbox is ticked, and not Archive Mailbox
You can also adjust how long the deleted mail stays in the trash immediately below that.
If you are talking about a gmail account, you may also have to login to your account on the gmail server and update the settings there. This is what Barney previously posted about that:

IPad2 problem with operating speed.

Hi!
Like in subject. After updating to iOS 8.1.1 my iPad2 work very slow. I restore system but problem with operating speed still there.
Regards
Jacek

Sorted by apple support. Thanks. If anyone is looking at this you set the mail account up using the Microsoft exchange option then type m.hotmail.com into the server.
Bye

Strange problem with desktop

Hi, I have a very strange problem with desktops and dashboards something else. For example, when I am on desktop 2 and i go to desktop 1, when I click with the mouse on it, it goes again to desktop 2. or when I am on desktop 1 and I go to ddashboard, it returns again to desktop 1 when i click to something in the dashboard.
but, if i am on desktop 3, and i go to desktop 1 throguh desktop 2, there is no problem. the same if i go from desktop 2 to dashboard.
I hope i've been clear enough to let you understand this... explanation =P
Anyone can help?

My system has started "freezing". Actually, usually when I'm browsing the net, Chromium stops loading pages. Conky stops updating, and usually I can't switch to another programs. I can't start xkill from menu, menu opens but nothing starts. If I run "ls" etc in Terminal, nothing happens
I can however control+alt+F1 to CLI, but if I try to login nothing happens.If doesn't help even if I kill X (I started it with startx). And if I don't kill X, I can't go back from CLI with control+alt+F7, there's just a black screen.
I'm using Nvidia drivers also, and XFCE4. This started happening some time ago, I think I was using Gnome2 back then. And I have updated my system, and this has happened at least with 3 kernel versions. There's nothing on logs. Well, actually, there's "TCP: Possible SYN flooding on port 6881. Sending cookies" errors on everything.log. But those don't happen when system freezes. And sometimes Chromium stops loading pages but other programs don't freeze, I think it's a problem with cache or something.
Not really sure if this everything happens because of Chromium. I think I'm gonna switch back to Firefox and see what happens. Usually I'm running Chromium, Opera (use it just for a couple of pages), couple of Terminals and Kaffeine.

Strange problem with connection to Integrator Server

Hi,
I have a strange problem with making a connection to my Integrator Server.
I have one workspace folder that I share between Integrator version 2.4 and 3.0 (I have several versions installed for testing purposes)
When I try to create a new Integrator Server Project in Integrator Designer I get this nice 'Connect to CloverETL Server' panel.
By default: the connection URL is http://localhost:8080/clover. So by default Integrator Designer wants to connect to my 2.4 Integrator Server.
When I change this to http://localhost:8301/clover by using the drop-down box and fill in my credentials everything is looking fine. I click Next.
The problem now is that every time I switch to the next or previous configuration windows the connection is reset to the default http://localhost:8080/clover.
So it seems like Integrator Designer resets the CloverETL Server URL each time I switch to a different configuration window by using NEXT or BACK.
The problem occurs in both versions of Integrator Designer.
Does anybody know that the problem is? Can I change the default URL to my 3.0 Integrator Server?
Greetings,
Marcow
Edited by: Marco Snels (AortaBI)(NL) on 31-mei-2013 4:59

I'm using iPlanet App server as well and experiencing similar problem. I load my SQL Server driver by Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver"), then use DriverManager.getDriver() to obtain the Driver.
However, the Driver returned is not the SQLServerDriver as expected. The Driver returned is com.netscape.server.jdbc.Driver! And then when I do Driver.getConnection("jdbc:microsoft:sqlserver://MyServer"), it throws an SQLException saying that it doesn't accept a jdbc:microsoft:sqlserver subprotocol. Well, of course it doesn't, it's not a microsoft Driver at all.
I suspect the problem is that the netscape Driver's acceptsURL() method ALWAYS returns true in iPlanet app server, thus when you getDriver(), the netscape Driver is always returned (and always returned as the first one since it's default?). Thus even though the same piece of code works fine as a standalone application, it just doesn't work on iPlanet app server.
My work around is:
Class.forName("my.Driver");
Enumeration enu = DriverManager.getDrivers();
Driver useThis = null;
while (enu.hasMoreElements()) {
Driver d = (Driver)enu.nextElement();
if (d.getClass().toString().indexOf("my.Driver") > -1) {
useThis = d;
Mind that my above code does not have an performance issue. If you look into the source code of how DriverManager get a Driver for a particular URL, it also loads the whole set of available Drivers, then call acceptsURL() method on each of them to find the first "suitable" one. Thus time complexity is the same.
I know this is not a very elegant solution and it defeats the purpose of having a DriverManager. Does any one else has a better way to solve this problem, like a way to specify the priority of each Driver so that SQLServerDriver is returned before the netscape Driver?
Thanks a lot.

Strange problem with my build JAR

Hiii everybody... I'm having a strange problem with my build (JAR file)... when I work with the Eclipse and I click in the table that returns the clients stored in my PostGre database it works fine, but when I build my application and it generates my JAR file and I open it and click in the same table to return the objects that I have.. it does not appears anymore.. just show when I work with eclipse... and the database is the same for both.
I already checked the database path in my properties file... and the application recognize the database because I can login and there isn't any runtime exception...
In that application I work with Hibernate and Spring... for me it is very strange because the application works fine when I run by eclipse... but does not return the database data when I click on my Jar file to open the application..
Someone can help me with that?
I dont know if the problem is in the Spring, Hibernate, Libraries...
thanks in advance...

So what's the error then? Are there any error messages? Have you checked the console? Or are you just clicking on the jar and you wouldn't even see the errors if there are any?
What do the logs say?
You're not giving a lot to work on here.

Strange problem with 2 different Soundblaster car

I have a very strange problem with these 2 cards First i had soundblaster li've value which was installed with the default windows drivers. Although it'swas installed correctly in device manager, i hear no sound and when i go to control panel->sounds and audio devices, under the volume tab there?was no audio device and everything?was greyed. But when i restart or shutdown the pc the windows sound suitable for this action played without problems. Media player couldn't play any sound, neither youtube. I downloaded and installed the Li'veDrvUni-Pack(ENG). Everything worked ok but after a while i had the same problem. So i decided to buy a different sound card, the Li've Audigy SE. Installed, worked fine, but after a short period of time i have the same problem. Most of the times when i boot into Windows the sound is ok, after a while (5 minutes or hour) i hear no sound and in the control panel i see the no audio device message although in control panel the card appears to be installed correctly. Any ideas?

Yes, I agree.
But my question: is there any software trick that I could use to fix the situation.
For example, how can I ask 2 keyboards about each one's NumLock state ?
I know about getLockingKeyState() function, but it always returns the NumState of the regular keyboard. How can I know and/or change the NumLock state of the small one ?
Thanks

Strange problem with DatagramSocket and DatagramPacket.

Hi!
I got a strange problem with UDP sockets:
Client (hardware device) send binary data messages, consisting of bytes and shorts fields (8 and 16 bits). But when I tried to read byte array, received from socket, I got some type anomaly. For example:
byte[] buffer = new byte[1024];
DatagramPacket packet = new DatagramPacket(buffer, 1024);
socket.receive(packet);
byte[] data = packet.getData();
System.out.println("Received data:");
for (int i = 0; i < packet.getLength(); i++) {
System.out.printf("%h:", data);
I got such thing: 34:4:fffffff1:ffffffdb:ffffffdc:20:1:1:0:2:50
If I try to parse it using ByteArrayInputStream and DataInputStream
ByteArrayInputStream is = new ByteArrayInputStream(packet.getData());
DataInputStream dis = new DataInputStream(is);
int head = dis.readByte();
int recvinfo = dis.readByte();
short count = (short)dis.readShort();
System.err.printf("Decoded:\n head: %h\n recvinfo: %h\n count: %h\n",
head, recvinfo, count);i got following:
Decoded:
head: 34
recvinfo: 4
count: fffff1db
So I get Integer entries in byte?! array. I also got Integer even I try to read and cast it as short in short!!! variable.
Please help!
P.S. Sorry for my bad English.

Rather fortunate that it auto-casts(or rather, that 0xFF is int by default, rather than attempting any type-detection as most languages do), as otherwise the brackets would have been in the wrong place. If it was still a byte after the "& 0xFF", sign extension would still occur.
For the sake of the less bit-literate reading this thread, it should be explained that the reason for this was large bytes being interpreted as negative numbers, which translate to negative int, which in hexa become very large ints. That's about as verbose as I can be about this without writing the equivalent of a wikipedia entry about 2s complement.

Strange problem with motherboard H67MA-E45(B3) =( please help

Hi, I have a strange problem with my motherboard . I have a H67MA-E45 (B3) (MSI-7678) , when i try to update it ( http://www.pcbrain.it/images/stories/msi/H67MA-E45/bios/14.JPG ) , i choose the fourth option "Select one file to update bios" , but the bios did not recognize the update file (E7678IMS.1C0) into the Usb flash drive , but if i choose the second option (select one file to boot) the file is recognized. First I made a backup of the bios, and into the USB flash drive has been created a file called "E7678ICX.162" (my current update). Why the extension is IXC ?!? it should have been IMS ! . I tried changing the file extension "E7678IMS.1C0" (the new update) into "E7678ICX.1C0" and when i select the fourth option , the file is recognized! . Obviously I have not started the update , but if I proceed with the update, changed the name of the extension, is it safe? Or do damage?..please help me :(
P.S. Sorry for my bad bad and very poor english , i'm italian =)

Quote from: HU16E on 28-September-11, 04:38:29
Manufacturer's Website info;
"KHX1333C9D3B1K2/4G 4GB 1333MHz
(2 x 2GB) CL9-9-9-27 1.5V"
Still think there is a batch conflict or possibly a bad stick in the new sticks. Might test each new stick individually for a bad one. Again, the other solution for an 8BG kit may be the new Kingston HyperX PnP's. Could you post a screenshot of CPUID's CPU-Z Memory & SPD Tab for one of the new sticks?
Added: Actually, screenshots of the old sticks Memory & SPD Tab may be of help too. It may be tRAS or tRFC differences between the two kits. Just speculation at this point though.
All the batchs works perfectly...this is the screen http://imageshack.us/f/163/ramkk.jpg/ ...save and zoom
EDIT: The old stick are SLOT #1 and SLOT #2 ...the new 3 and 4

Strange Problem with Web Object Manager

Hi,
I have a very strange problem with JDev.
When I register a servlet with the Web Object Manager, it does not work (the web server does not find the servlet). This is not the end... If I exit JDev, re-open it and return to the Web Object Manager, instead of the Web Object Manager tree appears a tree labeled JTree with leaves labeled "colors", "sports" and "food"???
No way to recover the Web Object Manager!
I had to re-install JDev.
Any ideas?
Thanks
-David

Thanks but I don't understand. Here is wtgapp.xml:
<?xml version = '1.0'?>
<workspace>
</workspace>
Here is webtogo.ora:
[WEBTOGO]
USE_SYSTEM_CLASSPATH=YES
DEBUG=YES
[FILESYSTEM]
ROOT_DIR=C:\
TYPE=OS
[MIMES]
html=text/html
xml=text/xml
xsl=text/xml
jsp=text/html;handler=oracle.jsp.JspServlet
xsql=text/html;handler=oracle.xml.xsql.XSQLServlet
[APPLICATIONS]
xmlfile=.\wtgapp.xml
[SERVLET_PARAMETERS]
emit_debuginfo=true
bypass_source=true
jspcompiler=oracle.jdeveloper.jsp.JspOjcCompiler
page_repository_root=C:\Program Files\Oracle\JDeveloper 3.1.1.2\myclasses\_pages
after I added my servlet (which was named Servlet1). Where is the problem exactely.
Thanks.
-David
In any case, is the fixed version available?
null

Strange problem with Dreamweaver Pop-Up menus

Hello:
I have encountered a very strange problem with DreamWeaver
pop-up menus, and I was wondering if I could get some help from
this forum, as I can't seem to find an answer anywhere else.
The problem involves use of DreamWeaver's pop-up menu
behavior — all works as expected, and my local preview of the
Web page/site works fine, but when I upload the site to a server, I
see extra question mark and "box" characters added to my drop-down
menus. This problem is inconsistent between browsers: Sometimes I
see it only on IE, sometimes I also see it on Firefox.
For example, check out the following URLs:
http://libertycreativesolutions.net/clients/cci/
... this implementation of drop-down menus ("Services"
button, etc.) displays an extra "box" character for each of the
drop-down menu items, but this only occurs in IE -- Firefox is
fine.
http://libertycreativesolutions.net/clients/microtek/HTML/MicroTek_home.html
... this implementation of drop-down menus shows an extra
question mark above the triggering link onMouseOver for Firefox,
and in IE, it shows this "box" character for both the triggering
buttons and for each menu item.
For both of these sites, the pop-up menus work without a
problem *when I'm looking at a local version on my workstation*.
What in the Wide Wide World of Sports is going on here????
Any help for this problem is appreciated.
Note that I stripped out the JavaScript code for menu
information from the <head></head> area of each of
these pages and placed it in a linked JavaScript document.
HELP!

First, you need to read this, written by the person who
adapted that menu
code for Macromedia -
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
Then you need to know that there are MUCH better ways to do
such things -
Check the uberlink and MacFly tutorials at PVII -
http://www.projectseven.com/
and the Navbar tutorial/articles at Thierry's place
http://tjkdesign.com/articles/dropdown/
Or this one (more recent article):
http://tjkdesign.com/articles/Pure_CSS_Dropdown_Menus.asp
Or to get it done fast, go here -
http://www.projectseven.com/tutorials/navigation/auto_hide/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Pomond69" <[email protected]> wrote in
message
news:[email protected]...
> Hello:
> I have encountered a very strange problem with
DreamWeaver pop-up menus,
> and I
> was wondering if I could get some help from this forum,
as I can't seem
> to
> find an answer anywhere else.
>
> The problem involves use of DreamWeaver's pop-up menu
behavior ? all works
> as
> expected, and my local preview of the Web page/site
works fine, but when I
> upload the site to a server, I see extra question mark
and "box"
> characters
> added to my drop-down menus. This problem is
inconsistent between
> browsers:
> Sometimes I see it only on IE, sometimes I also see it
on Firefox.
>
> For example, check out the following URLs:
>
>
http://libertycreativesolutions.net/clients/cci/
> ... this implementation of drop-down menus ("Services"
button, etc.)
> displays
> an extra "box" character for each of the drop-down menu
items, but this
> only
> occurs in IE -- Firefox is fine.
>
>
http://libertycreativesolutions.net/clients/microtek/HTML/MicroTek_home.html
> ... this implementation of drop-down menus shows an
extra question mark
> above
> the triggering link onMouseOver for Firefox, and in IE,
it shows this
> "box"
> character for both the triggering buttons and for each
menu item.
>
> For both of these sites, the pop-up menus work without a
problem *when I'm
> looking at a local version on my workstation*.
>
> What in the Wide Wide World of Sports is going on
here???? Any help for
> this
> problem is appreciated.
>
> Note that I stripped out the JavaScript code for menu
information from the
> <head></head> area of each of these pages
and placed it in a linked
> JavaScript
> document.
>
> HELP!
>

Strange problem with broadband. Speed very low.

Similar Messages

Maybe you are looking for