Strange Problem with creating logical Destination

Hello experts,
I have a really strange problem. I have created some AS and BO and deployed all web services. The problem is - where can i register the logical destination. Normaly the button should be under:
NWA->Configuration Management -> Infrastrucure (SP1)
But now I am using SP3 and I can't find the Button for WS Destinations. Is this now managed from another Button or is it not longer neccessary ????????
How can I than integrate my operation from the BO in a Visual Composer DC.
Thanks a lot
Regards
Marco

hi,
you could try the nwa > SOA Management > Destination Template Management >
best regards,
v s

Similar Messages

STRANGE PROBLEM with "Create New Mail Account.scpt" when creating POP acct.

I am using "Create New Mail Account.scpt" to create a POP account. It creates the account successfully. It fetches the mails successfully. Now the problem begins. After fetching all the mails once if u click "Get Mail" in mac mail, it fetches all the emails again and has now 1 original and 1 copy of the email set which is on the server. I just need 1 copy of the mail set not multiple. Please give me a solution or direct me to a help.
Thanks
SCRIPT
global theUsername
global thePassword
set success to 1
set theResult to true
if theResult is not equal to false
#set theAccountName to getAccountName()
#set theUsername to getUsername()
#set thePassword to getPassword()
#set theEmailAddresses to getEmailAddress()
#set theFullName to getFullName()
-- POP Account
if accountTypeString is equal to "POP" or accountTypeString is equal to "IMAP" then
set theHostname to "THE HOST NAME"
-- POP specific options
if accountTypeString is equal to "POP" then
set deletionPolicy to my getDeletionPolicy()
if deletionPolicy is not equal to false then
set deletionPolicy to item 1 of deletionPolicy
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
setDeletionPolicy(theNewAccount, deletionPolicy)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
-- IMAP specific options
else if accountTypeString is equal to "IMAP" then
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
getAndSetCachingSettings(theNewAccount)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
end if
if success is equal to 1 then
display dialog "Account created!"
else
display dialog "Account creation failed!"
end if
end if
-- Convenience handler for creating accounts
on createAccount(theAccountType, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
tell application "Mail"
try
if theAccountType is equal to ".Mac" then
set theNewAccount to make new Mac account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "IMAP" then
set theNewAccount to make new imap account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "POP" then
set theNewAccount to make new pop account with properties {name:theAccountName, user name:theUsername, server name:theHostname, include when getting new mail:true, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
end if
on error
set theNewAccount to false
end try
end tell
return theNewAccount
end createAccount
-- Ask the user what they would like to name the account
on getAccountName()
repeat
set theResult to display dialog "What would you like this account to be named?" default answer "Example: My Home Account"
set theAccountName to text returned of theResult
if theAccountName does not start with "Example:" then
exit repeat
end if
end repeat
return theAccountName
end getAccountName
-- Ask the user for the user name for their email account
on getUsername()
repeat
set theResult to display dialog "What is your email user name?" default answer "Example: janedoe"
set theUsername to text returned of the theResult
if theUsername does not start with "Example:" then
exit repeat
end if
end repeat
return theUsername
end getUsername
-- Ask the user for the password for their email account
on getPassword()
set theResult to display dialog "What is the password for this account?" default answer ""
set thePassword to text returned of theResult
return thePassword
end getPassword
-- Ask the user for the email addresses for their email account
on getEmailAddress()
repeat
set theResult to display dialog "What email address would you like to use for this account?" default answer "Example: [email protected]"
set theEmailAddress to text returned of theResult
if theEmailAddress does not start with "Example:" then
exit repeat
end if
end repeat
return theEmailAddress
end getEmailAddress
-- Ask the user for the full name for their email account
on getFullName()
repeat
set theResult to display dialog "What is the full name for this account?" default answer "Example: Steve Smith"
set theFullName to text returned of theResult
if (theFullName does not start with "Example:") then
exit repeat
end if
end repeat
return theFullName
end getFullName
-- Convenience handler for asking the user what settings they would
-- like to have for their special mailboxes. This handler also sets these
-- values in Mail.
on getAndSetSpecialMailboxes(theAccount)
-- Sent messages default to storing locally
set theResult to display dialog "Would you like to store Sent Messages on the IMAP server?" buttons {"Yes", "No"} default button 2
log theAccount
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store sent messages on server to true
else if button returned of theResult is equal to "No" then
set store sent messages on server to false
end if
end tell
end tell
-- Drafts default to storing locally
set theResult to display dialog "Would you like to store Drafts on the IMAP server?" buttons {"Yes", "No"} default button 2
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store drafts on server to true
else if button returned of theResult is equal to "No" then
set store drafts on server to false
end if
end tell
end tell
-- Trash defaults to storing on the IMAP server
set theResult to display dialog "Would you like to store Deleted Messages on the IMAP server?" buttons {"Yes", "No"} default button 1
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store deleted messages on server to true
else if button returned of theResult is equal to "No" then
set store deleted messages on server to false
end if
end tell
end tell
end getAndSetSpecialMailboxes
-- Convenience handler for asking the user what IMAP
-- caching setting they would like to use and configuring
-- it in Mail.
on getAndSetCachingSettings(theAccount)
set theResult to choose from list {"Cache everything", "Cache everything but attachments", "Cache when read", "Don't cache"} ¬
with prompt "Choose a message caching setting for this account:" default items {"Cache everything"} without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
tell theAccount
if (item 1 of theResult is equal to "Cache everything") then
set message caching to all messages and their attachments
else if (item 1 of theResult is equal to "Cache everything but attachments") then
set message caching to all messages but omit attachments
else if (item 1 of theResult is equal to "Cache when read") then
set message caching to only messages I have read
else if (item 1 of theResult is equal to "Don't cache") then
set message caching to do not keep copies of any messages
end if
end tell
end tell
end if
end getAndSetCachingSettings
-- Convenience handler for asking the user whether they want to use
-- an already defined SMTP server (if any) or whether they want to
-- define a new one.
on getAndSetSMTPServer(theAccount)
tell application "Mail" to set everySMTPServer to every smtp server
if ((count of everySMTPServer) > 0) then
set listOfSMTPServers to {}
repeat with eachServer in everySMTPServer
try
set listOfSMTPServers to listOfSMTPServers & name of eachServer
end try
end repeat
createNewSMTPServer(theAccount)
else
createNewSMTPServer(theAccount)
end if
end getAndSetSMTPServer
-- Handler for creating a new SMTP server, if the user has none set up
-- already or if they choose not to use one of their existing servers.
on createNewSMTPServer(theAccount)
set theServerName to "THE SERVER NAME"
tell application "Mail"
set theSMTPServer to make new smtp server with properties {server name:theServerName, port:25, uses ssl:true}
set smtp server of theAccount to theSMTPServer
end tell
getAndSetAuthenticationScheme("SMTP", theSMTPServer)
end createNewSMTPServer
-- Handler for asking the user what authentication scheme their server supports.
-- The options are different for POP, IMAP, and SMTP. Unless you are told otherwise,
-- it's best to leave these at their default settings.
on getAndSetAuthenticationScheme(accountType, theAccount)
if accountType is equal to "POP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "KPOP", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "IMAP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "SMTP" then
set theChoices to {"None", "Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
end if
set theResult to choose from list theChoices ¬
with prompt ¬
"Choose an authentication scheme for this " & accountType & " server. Most servers support 'Password' authentication." default items theDefault without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
set theScheme to item 1 of theResult
tell theAccount
if theScheme is equal to "Password" then
set authentication to password
else if theScheme is equal to "Kerberos 4" then
set authentication to «constant exutaxk4»
else if theScheme is equal to "Kerberos 5" then
set authentication to kerberos 5
else if theScheme is equal to "MD5" then
set authentication to md5
else if theScheme is equal to "None" then
set authentication to none
else if theScheme is equal to "KPOP" then
set authentication to «constant exutakpo»
end if
end tell
end tell
if accountType is equal to "SMTP" then
set theSMTPLogin to theUsername
set theSMTPPassword to thePassword
tell application "Mail"
tell theAccount
set user name to theSMTPLogin
set password to theSMTPPassword
set uses ssl to true
set port to 25
end tell
end tell
end if
end if
end getAndSetAuthenticationScheme
-- Handler for asking the user what POP deletion policy
-- they would like to use for their account.
on getDeletionPolicy()
set theResult to choose from list {"Immediately after being downloaded", "After a specified number of days", ¬
"When I remove them from the inbox", "Always leave them on the server"} ¬
with prompt ¬
"Choose a POP message deletion option:" default items {"Always leave them on the server"} without multiple selections allowed
return theResult
end getDeletionPolicy
-- Handler for setting the deletion policy established in getDeletionPolicy()
on setDeletionPolicy(theAccount, thePolicy)
tell application "Mail"
tell theAccount
if thePolicy is equal to "Immediately after being downloaded" then
set delete mail on server to true
set delayed message deletion interval to 0
else if thePolicy is equal to "After a specified number of days" then
set numberOfDays to my getDeletionInterval()
set delete mail on server to true
set delayed message deletion interval to numberOfDays
else if thePolicy is equal to "When I remove them from the inbox" then
set delete mail on server to true
set delete messages when moved from inbox to true
else if thePolicy is equal to "Always leave them on the server" then
set delete mail on server to false
end if
end tell
end tell
end setDeletionPolicy
-- Handler for asking the user what deletion interval they
-- would like to use, if they are setting up a POP account
on getDeletionInterval()
set theResult to display dialog "After how many days would you like POP messages to be deleted from the server?" default answer "30"
set numberOfDays to text returned of theResult as integer
return numberOfDays
end getDeletionInterval

Hi amiaba, and a warm welcome to the forums!
I can't quite tell what it's doing, but open Keychain Access in Applications>Utilities, click on your Keychain on the left, put .mac in the search bar, once you find it, double click on it and click show password.
If you have no mail in there try this with Mail quit.
Drag this file to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Start Mail & see if it steps you through it.
Not sure on the .uk thing, but is Date & Time>Time Zone set to the UK?

Strange problem with ACLs

Hi,
I have just migrated an oracle database from 11.1.0.7 on Win Server 2003 to 11.2 on Linux 64 bit. I am having a strange problem with ACLs - I can create the ACL but when I perform either of the following two commands:
SELECT * FROM DBA_NETWORK_ACLS
or
SELECT * FROM NET$_ACL
I get no rows returned. The ACL exists somehow because if I try and create it again I get the error that it exists. Has anyone got any advice here? Something is out of sync and I need to know how to fix it up.
Thanks
Adam

BEGIN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
acl => 'email_server_acl.xml',
description => 'Network connection Email Server',
principal => 'MAIL',
is_grant => TRUE,
privilege => 'connect');
END;
PL/SQL procedure successfully completed.
select * from DBA_NETWORK_ACLS;
(no rows)
BEGIN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
acl => 'email_server_acl.xml',
description => 'Network connection Email Server',
principal => 'MAIL',
is_grant => TRUE,
privilege => 'connect');
END;
ORA-31003: Parent /sys/acls/ already contains child entry email_server_acl.xml
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 252
ORA-06512: at line 2
Edited by: Adam J. Sawyer on 15/04/2011 17:08

Some strange problem with Flash/As3

Hi,
I am having some strange problem with my flash cs3.
Whatever script I write in as3 doesn't work, even a stop() function doesn't work . But when I change my publish setting to as2 it works fine.
Not sure about the root cause, may be some setting or preference or my cs3 is corrupted.
Can anybody please advise.
Thanks,
Kishor

try this
create a new fla as3,
select frame 1
open the actions panel
paste in the following code
var squares:Array = new Array;
setup();
function setup():void {
    for (var i = 0; i < 25; i++) {
        var square:Sprite = new Sprite();
        //square.name = "square" + i;
        square.graphics.beginFill(Math.random() * 0xffffff);
        squares.push(square);
        squares[i].graphics.drawRect(0, 0, 100, 100);
        squares[i].x = i*3;
        squares[i].y = i*3;
        squares[i].filters = [];
        square.graphics.endFill();
        stage.addChild(squares[i]);
for (var j = 0; j < squares.length; j++) {
    squares[j].addEventListener(MouseEvent.MOUSE_DOWN, dragMovie);
    squares[j].addEventListener(MouseEvent.MOUSE_UP, dropMovie);
    squares[j].buttonMode = true;
function dragMovie(event:MouseEvent):void {
    event.target.startDrag();
function dropMovie(event:MouseEvent):void {
    event.target.stopDrag();

Strange problem with WD component build

Hi all,
I have strange problem with building one wd component, which is part of SC. I'm getting few errors which stops me from building component (and transporting to other systems via CMS of course). I'm providing sample of the errors (3 types) and ant error:
[code]     [wdgen] [Error]   com.gbs.gmob.RequisitionFoCust --> ContextValueAttribute startDate [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   com.gbs.gmob.RequisitionFoCust --> ContextValueAttribute stopDate [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   com.gbs.gmob.SuppMatGroupView --> TextView MATERIAL_GROUP_NAME_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.gbs.gmob.SuppMatGroupView --> TextView MATERIAL_GROUP_ID_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.gbs.gmob.SupplierCust --> ContextModelNode SuppMatGroup [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Error]   com.gbs.gmob.SupplierCust --> ContextValueAttribute material_group_list [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Warning] com.gbs.gmob.ApprovalRejectView --> TextEdit TextEdit: UIElement does not have a label
     [wdgen] [Info]    Catching throwable null
     [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:153)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2050)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(Generation.java:1299)
     [wdgen]      at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:175)
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:50)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
     [wdgen]      at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:219)
     [wdgen]      at org.apache.tools.ant.Task.perform(Task.java:341)
     [wdgen]      at org.apache.tools.ant.Target.execute(Target.java:309)
     [wdgen]      at org.apache.tools.ant.Target.performTasks(Target.java:336)
     [wdgen]      at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
     [wdgen]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:115)
     [wdgen]      at com.sap.tc.buildplugin.AbstractAntBuildAction.execute(AbstractAntBuildAction.java:65)
     [wdgen]      at com.sap.tc.buildplugin.AbstractPlugin.handleBuildStepSequence(AbstractPlugin.java:225)
     [wdgen]      at com.sap.tc.buildplugin.AbstractPlugin.performBuild(AbstractPlugin.java:201)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
     [wdgen]      at com.sap.tc.buildtool.PluginCommunicator.maybeInvoke(PluginCommunicator.java:114)
     [wdgen]      at com.sap.tc.buildtool.PluginCommunicatorV2.communicate(PluginCommunicatorV2.java:42)
     [wdgen]      at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:354)
     [wdgen]      at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:176)
     [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1726)
     [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:5559)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
     [wdgen]      at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
     [wdgen] ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
     [wdgen] ERROR: Generation failed due to errors (6 seconds)
Ant runtime 9.234 seconds
Ant build finished with ERRORS
[Error]   Generation failed!
Error: Build stopped due to an error: [Error]   Generation failed!
[/code]
Strange is that if I try to rebuild and deploy locally, no errors occurs and I can normally deploy and run application manually!
Does anyone have experience with this problem?
Thanks in advance!
Regards,
Ivan

Hi Ivan
I have faced this problem earlier BUT ultimately I have to create the DC from scratch.
But you can check these things:
1.Have you copy/pasted Dictionary type from other location (check the path of the dictionary types ) --> If yes then deleted that and create again(do not use copy/paste)
2.This also happens if your "Used DC" has some problems in the JDI --> Remove the used DC and add it again.
3.Make sure the NWDI infastructure is perfect- this may be a cause.
4. Check Context mappings --> delete all mappings > save metadata > Create again.
5. Delete the model and recreate it again.
6.If you have done reimporting model make sure to restart J2EE instance.
Hope this solves the problem - if not please post
Regards
Ananda

Strange Problem with a Vector wraped inside a Hashtable

Hi all ,
I'm having a strange problem with a Vector wraped within a Hashtable inherited Class.
My goal is to keep the order of the elements of the Hashtable so what I did was to extend Hashtable and wrap a Vector Inside of it.
Here is what it looks like :
package somepackage.util;
import java.util.Enumeration;
import java.util.Hashtable;
import java.util.Vector;
public class OrderedHashTable extends Hashtable {
    private Vector index;
    /** Creates a new instance of OrderedHashTable */
    public OrderedHashTable() {
        this.index = new Vector();
//adds a key pair value to the HashTable and adds the key at the end of the index Vector
   public synchronized Object put(Object key,Object value){
       index.addElement(key);
       Object obj = super.put(key,value);
       System.out.println("inside OrderedHashTable Put method index size = " + index.size());
       return obj;
public synchronized Object remove(Object key){
       int indx = index.indexOf(key);
       index.removeElementAt(indx);
       Object obj = super.remove(key);
       return obj;
public synchronized Enumeration getOrderedEnumeration(){
       return index.elements();
public synchronized Object getByIndex(int indexValue){
       Object obj1 = index.elementAt(indexValue);
       Object obj2 = super.get(obj1);
       return obj2;
   public synchronized int indexOf(Object key){
    return index.indexOf(key);
    public synchronized int getIndexSize() {
        return index.size();
    }Everything seemed to work fine util I tried to add objects using a "for" loop such as this one :
private synchronized void testOrderedHashTable(){
        OrderedHashTable test = new OrderedHashTable();
        for (int i = 1 ; i<15; i++){
             System.out.println("adding Object No " + i);
             String s = new String("string number = "+i);
             test.put(new Integer(i),s);
             System.out.println("-----------------------------------");
        //try to list the objects
        Enumeration e = test.getOrderedEnumeration();
        while (e.hasMoreElements()){
            Integer intObj = (Integer) e.nextElement();
            System.out.println("nextObject Number = "+ intObj);
    }Here is the console output :
Generic/JSR179: adding Object No 1
Generic/JSR179: inside OrderedHashTable Put method index size = 1
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 2
Generic/JSR179: inside OrderedHashTable Put method index size = 2
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 3
Generic/JSR179: inside OrderedHashTable Put method index size = 3
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 4
Generic/JSR179: inside OrderedHashTable Put method index size = 4
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 5
Generic/JSR179: inside OrderedHashTable Put method index size = 5
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 6
Generic/JSR179: inside OrderedHashTable Put method index size = 6
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 7
Generic/JSR179: inside OrderedHashTable Put method index size = 7
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 8
Generic/JSR179: inside OrderedHashTable Put method index size = 8
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 9
Generic/JSR179: inside OrderedHashTable Put method index size = 10
Generic/JSR179: inside OrderedHashTable Put method index size = 10
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 10
Generic/JSR179: inside OrderedHashTable Put method index size = 11
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 11
Generic/JSR179: inside OrderedHashTable Put method index size = 12
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 12
Generic/JSR179: inside OrderedHashTable Put method index size = 13
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 13
Generic/JSR179: inside OrderedHashTable Put method index size = 14
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 14
Generic/JSR179: inside OrderedHashTable Put method index size = 15
Generic/JSR179: -----------------------------------
Generic/JSR179: nextObject Number = 1
Generic/JSR179: nextObject Number = 2
Generic/JSR179: nextObject Number = 3
Generic/JSR179: nextObject Number = 4
Generic/JSR179: nextObject Number = 5
Generic/JSR179: nextObject Number = 6
Generic/JSR179: nextObject Number = 7
Generic/JSR179: nextObject Number = 8
Generic/JSR179: nextObject Number = 9
Generic/JSR179: nextObject Number = 9
Generic/JSR179: nextObject Number = 10
Generic/JSR179: nextObject Number = 11
Generic/JSR179: nextObject Number = 12
Generic/JSR179: nextObject Number = 13
Generic/JSR179: nextObject Number = 14
You can notice that the output seems correct until the insertion of object 9.
At this point the vector size should be 9 and the output says it is 10 elements long ...
In the final check you can notice the 9 was inserted twice ...
I think the problem has something to do with the automatic resizing of the vector but I'm not really sure. Mybe the resizing is done in a separate thread and the new insertion occurs before the vector is resized ... this is my best guess ...
I also tested this in a pure J2SE evironment and I don't have the same strange behavior
Can anybody tell me what I am doing wrong or how I could avoid this problem ?
Thanks a lot !
Cheers Alex

Am i doing anything wrong?Uhm, yes. Read the API doc for addElement() and for addAll()

Problem with looping logic

Hello all,
Ok reposted using code tags, sorry about that.
I'm trying to write some code to take in a 2D int array, loop through the array to identify where certain blocks of numbers begin and record that location so that I an jump straight to it at a later time. The number blocks go up iteratively from a point from 0 to 9 and are surrounded by nodata values(-9999).
The problem is that when I print out the numbers they are only being recognised up to 6 (7th number) and when I check the locations against the original text file they dont match. I think it's just a problem with my logic but I'm not sure why.
The text file is converted to ints and placed in an array from a buffered file reader in a seperate class. I can put this up if needed.
Any help would be much appreciated.
Thanks.
Duncan
* Class imports text file which contains a collection of values, either nodata(-9999) or a location
* represented by numbers moving away from a point; 0 closest then 1, then 2 etc.
* records the first location of each number to avoid having to loop through the whole file each time.
* i.e. can later jump straight to the first recorded location of each number.
* In current text file there are 10 numbers(0 - 9) but for some reason it stops finding them after
* 6(seventh no.) and having checked the location values against the original text file these are wrong
* by a fair way as well.
import java.io.*;
//import java.awt.*;
//import java.awt.event.*;
public class Hydrograph {
     int width = 0;
     int height = 0;
     int dZeroC, dZeroD = 0;
     int dOneC, dOneD = 0;
     int dTwoC, dTwoD = 0;
     int dThreeC, dThreeD = 0;
     int dFourC, dFourD = 0;
     int dFiveC, dFiveD = 0;
     int dSixC, dSixD = 0;
     int dSevenC, dSevenD = 0;
     int dEightC, dEightD = 0;
     int dNineC, dNineD = 0;
     public Hydrograph() {
          /* Ignore this bit it's being used for something else
          //File file = new File("c:/Users/Duncan/Documents/MODULES/MSc Dissertation/Code/A1.txt");
          //File file = new File("M:/java/code/A1.txt");
          ArrayRead ar = null;
          ar = new ArrayRead(file);
          int rows = ar.getRows();
          int columns = ar.getColumns();
          int steps = ar.getSteps();
          int[][][] threeDIntArray = ar.getThreeDIntArray();
          // Creates a new instance of delay class which takes in a text file and converts
          // it to int form, placing it into a 2D int array.
          Delay dLay = null;
          dLay = new Delay();
          width = dLay.getWidth();
          height = dLay.getHeight();
          int[][] twoDDelayFile = dLay.getTwoDintArray();
          int delayCount = 0;
          // Loops through 2D int array to identify when number first equals 0, then passes
          // the height and width values to storeDelayPos method below. Then finds for 1, 2
          // 3, 4,...etc by adding 1 to delayCount.
          System.out.println(" ");
          for (int a=0; a<width; a++) {
               for (int b=0; b<height; b++) {
                    if (twoDDelayFile[a] == delayCount) {
                         int c, d = 0;
                         c = a;
                         d = b;
                         storeDelayPos(c, d, delayCount);
                         System.out.println(delayCount);
                         delayCount++;
                         break;
               //System.out.println(" ");
          System.out.println(" ");
          System.out.print(dZeroC + " " + dZeroD);
          System.out.println(" ");
          System.out.print(dOneC + " " + dOneD);
          System.out.println(" ");
          System.out.print(dTwoC + " " + dTwoD);
          System.out.println(" ");
          System.out.print(dThreeC + " " + dThreeD);
          System.out.println(" ");
          System.out.print(dFourC + " " + dFourD);
          System.out.println(" ");
          System.out.print(dFiveC + " " + dFiveD);
          System.out.println(" ");
          System.out.print(dSixC + " " + dSixD);
          System.out.println(" ");
          System.out.print(dSevenC + " " + dSevenD);
     // Takes in width, height and delayCount value and sets variables according to
     // the value of delayCount.
     void storeDelayPos (int setC, int setD, int setDCount) {
          int dCount = 0;
          dCount = setDCount;
          switch(dCount) {
               case 0:
                    dZeroC = setC;
                    dZeroD = setD;
                    break;
               case 1:
                    dOneC = setC;
                    dOneD = setD;
                    break;
               case 2:
                    dTwoC = setC;
                    dTwoD = setD;
                    break;
               case 3:
                    dThreeC = setC;
                    dThreeD = setD;
                    break;
               case 4:
                    dFourC = setC;
                    dFourD = setD;
                    break;
               case 5:
                    dFiveC = setC;
                    dFiveD = setD;
                    break;
               case 6:
                    dSixC = setC;
                    dSixD = setD;
                    break;
               case 7:
                    dSevenC = setC;
                    dSevenD = setD;
                    break;
               case 8:
                    dEightC = setC;
                    dEightD = setD;
                    break;
               case 9:
                    dNineC = setC;
                    dNineD = setD;
                    break;
               default:
                    System.out.println("OUT OF BOUNDS");
                    break;
     public static void main (String args[]) {
     new Hydrograph();

Hi,
I am working on a hydrograph program in java as well... I am trying to represent rainfall data. Do you think that you could share some of the code that you came up with, so that I don't have to go through the whole process.
thank you so much,
Kevin

Strange problem with connection to Integrator Server

Hi,
I have a strange problem with making a connection to my Integrator Server.
I have one workspace folder that I share between Integrator version 2.4 and 3.0 (I have several versions installed for testing purposes)
When I try to create a new Integrator Server Project in Integrator Designer I get this nice 'Connect to CloverETL Server' panel.
By default: the connection URL is http://localhost:8080/clover. So by default Integrator Designer wants to connect to my 2.4 Integrator Server.
When I change this to http://localhost:8301/clover by using the drop-down box and fill in my credentials everything is looking fine. I click Next.
The problem now is that every time I switch to the next or previous configuration windows the connection is reset to the default http://localhost:8080/clover.
So it seems like Integrator Designer resets the CloverETL Server URL each time I switch to a different configuration window by using NEXT or BACK.
The problem occurs in both versions of Integrator Designer.
Does anybody know that the problem is? Can I change the default URL to my 3.0 Integrator Server?
Greetings,
Marcow
Edited by: Marco Snels (AortaBI)(NL) on 31-mei-2013 4:59

I'm using iPlanet App server as well and experiencing similar problem. I load my SQL Server driver by Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver"), then use DriverManager.getDriver() to obtain the Driver.
However, the Driver returned is not the SQLServerDriver as expected. The Driver returned is com.netscape.server.jdbc.Driver! And then when I do Driver.getConnection("jdbc:microsoft:sqlserver://MyServer"), it throws an SQLException saying that it doesn't accept a jdbc:microsoft:sqlserver subprotocol. Well, of course it doesn't, it's not a microsoft Driver at all.
I suspect the problem is that the netscape Driver's acceptsURL() method ALWAYS returns true in iPlanet app server, thus when you getDriver(), the netscape Driver is always returned (and always returned as the first one since it's default?). Thus even though the same piece of code works fine as a standalone application, it just doesn't work on iPlanet app server.
My work around is:
Class.forName("my.Driver");
Enumeration enu = DriverManager.getDrivers();
Driver useThis = null;
while (enu.hasMoreElements()) {
Driver d = (Driver)enu.nextElement();
if (d.getClass().toString().indexOf("my.Driver") > -1) {
useThis = d;
Mind that my above code does not have an performance issue. If you look into the source code of how DriverManager get a Driver for a particular URL, it also loads the whole set of available Drivers, then call acceptsURL() method on each of them to find the first "suitable" one. Thus time complexity is the same.
I know this is not a very elegant solution and it defeats the purpose of having a DriverManager. Does any one else has a better way to solve this problem, like a way to specify the priority of each Driver so that SQLServerDriver is returned before the netscape Driver?
Thanks a lot.

Strange problem with JComboBox

I am having a strange problem with JComboBox, I created a method as a JComboBox factory which returns a JComboBox filled with items. the method works fine and I can see the items in the JComboBox. The problem is when I try using the method myCombo.SelectedItem(String item); the object myCombo does not set the selected item, it just leaves the item blank (or unselected).
//This method build a JComboBox
public javax.swing.JComboBox makeJComboBox(String[] items) {
javax.swing.JComboBox myComboBox = new javax.swing.JComboBox();
for (int index=0;index<items.length;index++){
myComboBox.addItem(makeObj(items[index]));
return myComboBox;
public Object makeObj(final String item) {
return new Object() {
public String toString() {
return item;
}

Couple of better ways to populate a combo with items-
public javax.swing.JComboBox makeJComboBox(String[]items) {
javax.swing.ComboBoxModel cbModel = new DefaultComboBoxModel(items);
javax.swing.JComboBox myComboBox = new javax.swing.JComboBox(cbModel);
return myComboBox;
}OR
public javax.swing.JComboBox makeJComboBox(String[]items) {
return new javax.swing.JComboBox(items);

Strange problem with color measure in Mac.

Hello, I am having a strange problem with color measure in Mac. For example i create a gradient in Photoshop from color 200 200 200 to color 240 240 240. When i measure the color of the gradient with the color measure tool of Photoshop or with the built in OS X color measure tool the measured color is from 200 199 197 to 240 240 238. I have measured the same gradient with Photoshop for PC and the values are OK (the same values that i create).
I dont know what is the problem, but i belive that the colors that i create would be the same that i measure after creating them, and also the same values between Mac and PC. I will appreciate it a lot any help or information that you could give me that helps me to understand what is happening here.
Thank you for your time
Marcelo.

Yep you got it, proof as monitor basicaly strips out any profiling and just delivers it straight.
is there any way to make the OS X color measure tool to measure the original color values
You mean the document colors - No, like I said photoshop is filtering your image through document profile, proof setup and monitor profile. Why do you want to use Digital color meter anyway for this?
i dont understand what is the point to measure color values that will change every time a calibrate my monitor.
Because color values are 'bigger' than whats on your monitor. Your monitor (via photoshop) is only doing the best it can to display those values - which can be anything from LAB colors outside the gamut of your monitor - to CMYK colors. Calibrating it is the only way to allow your monitor to do this in any way accurately. (not ever really possible) Monitors have a certain gamut and are only dispays/representations of the REAL colors that a document, with a profile, holds. So there's only one good reason to measure monitor values, and that's to generate a monitor profile.

Strange Problem with Mail & Address Book

Hi,
I'm having a strange problem with Mail & Address Book.
When I go to compose a new message from Mail and hit the Address button (to show my email addresses), it won't launch the contacts window!
I get this log from console;
2007-10-15 22:55:59.079 Mail[410] * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
If I try to launch the Address Book from my Applications folder, it won't open, and it gives me this log from console;
2007-10-15 22:57:57.348 Address Book[417] * -[NSKeyedUnarchiver initForReadingWithData:]: data is NULL
Oct 15 22:57:57 PB-G4 /Applications/Address Book.app/Contents/MacOS/Address Book: CGImageSourceCreateWithData data parameter is nil\n
2007-10-15 22:57:57.350 Address Book[417] Don't know about packed image EditLeftCapStd
2007-10-15 22:57:57.350 Address Book[417] Exception raised during posting of notification. Ignored. exception: * -[NSCFArray addObject:]: attempt to insert nil
If I quit Address Book, i'll get this from console;
2007-10-15 22:58:37.892 Address Book[417] -[ABAddressBook setDefaultCountryCode:] called with a unknown country code 'us'
I tried deleting the preferences, re-installing Address Book, also tried creating a new user, again no luck!
Can somebody help!!!
Please?!

Hi dp13.
Do you have any Address Book plug-ins or system utilities that could interfere with Address Book? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/Address Book Plug-Ins/
~/Library/Address Book Plug-Ins/
To make accurately reporting this information easier, you may open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>. You can then copy the output of that command from Terminal and paste it in your reply to this post:
ls -1 /Library/Address\ Book\ Plug-Ins ~/Library/Address\ Book\ Plug-Ins
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.
<hr>
Did you also reinstall the appropriate Combo Update after reinstalling Address Book?
Quit all the applications and verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with the computer:
About the Mac OS X 10.4.10 Combo Update
Mac OS X 10.4.10 Combo Update for PowerPC
Mac OS X 10.4.10 Combo Update for Intel
After installing the Combo Update, the computer may restart twice and the first restart may take several minutes. This is normal.
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk and back up before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

Strange Problem with tableView:didSelectRowAtIndexPath:

Hi,
I have a strange problem with selecting rows in a table view (iPhone OS 3.0):
I select a row in the table view and the method tableView:didSelectRowAtIndexPath: doesn't get called. After that I select another row in the same table view and the method gets called, but with the indexPath of the first selected row. When I select a third cell in the table the method tableView:didSelectRowAtIndexPath: gets called with the Index Path of the second selected row and so on
When I click on the same row for example n times in succession, tableView:didSelectRowAtIndexPath: doesn't get called, but when I select another row the method gets called n times with the index path of the first row.
I'm using different table views in my app and in only one of them I have this problem. Unfortunately I have no clue whats the cause for that behavior. (the problematic table view is created and used like the other ones).
I hope anybody has a hint for me.
Thanks,
Thomas

Hi,
since I didn't found a reason for the problem I recreated the ViewController class with the table view from scratch and the problem disappeared ...

Strange problem with Inheritance

Hi,
I have a Strange problem with Inheritance which I think should work, but doesn't.
I have 3 classes in 3 different packages.
Class A in package 1 is abstract
Class B extend class A is also Abstract and is in package 2
Class C extend Class B and is in package 3
When i do the following
C c = new C();
A a = (A)c;
I get a class cast exception
Any ideas?
Jag

That should work fine. Can you check the exact classes created (using: System.out.println(c.getClass().toString()). You may have accidentally created an instance of a class with the same name but from a different package.

Strange problem with linking to external vob-file

I have a strange problem with linking to external vob-file. I
have created a link using BudApi:
on mouseup
set OK = baOpenFile ( the pathname &
"Files\General\Video\VTS_01_1.VOB", "normal")
end
This code opens mpg-videos correctly, but nothing happens
when I try to open vob-files with the same code. The strangest
thing is that when I change the default program for vob-files to
WinDVD this code works and the file opens, but when I change the
default program to Nero Showtime this code doesn't do anything
(when I open the file 'manually' from the folder, it opens
correctly on Nero Showtime). My client uses Nero Showtime, so I
really would appreciate any help on this one.

temes wrote:
>
quote:
Originally posted by:
Newsgroup User
>> When using Nero Showtime as a default program, the
error code is 31,
>> "There is no application associated with the given
filename".
>
> Which suggests that something has gone wrong with file
associations.
> If
> you double-click one of these files in an Explorer
window does it fire
> up Showtime and open the file?
>
>
> Yes, the file opens correctly in Nero Showtime when
double-clicking
> it in an Explorer. I tried the file associations and
created a
> html-page with a link to the vob-file, and the html-link
opens the
> vob-file correcly with Nero Showtime. My client reported
this
> problem, so it's not just my computer which is having
this problem.
If you open a command prompt, do you get an association
listed like this
example for .txt files:
C:\>assoc .txt
.txt=txtfile
C:\>ftype txtfile
txtfile="D:\Program Files\JGsoft\EditPadLite\EditPadLite.exe"
"%1"
Andrew

Strange problem with motherboard H67MA-E45(B3) =( please help

Hi, I have a strange problem with my motherboard . I have a H67MA-E45 (B3) (MSI-7678) , when i try to update it ( http://www.pcbrain.it/images/stories/msi/H67MA-E45/bios/14.JPG ) , i choose the fourth option "Select one file to update bios" , but the bios did not recognize the update file (E7678IMS.1C0) into the Usb flash drive , but if i choose the second option (select one file to boot) the file is recognized. First I made a backup of the bios, and into the USB flash drive has been created a file called "E7678ICX.162" (my current update). Why the extension is IXC ?!? it should have been IMS ! . I tried changing the file extension "E7678IMS.1C0" (the new update) into "E7678ICX.1C0" and when i select the fourth option , the file is recognized! . Obviously I have not started the update , but if I proceed with the update, changed the name of the extension, is it safe? Or do damage?..please help me :(
P.S. Sorry for my bad bad and very poor english , i'm italian =)

Quote from: HU16E on 28-September-11, 04:38:29
Manufacturer's Website info;
"KHX1333C9D3B1K2/4G 4GB 1333MHz
(2 x 2GB) CL9-9-9-27 1.5V"
Still think there is a batch conflict or possibly a bad stick in the new sticks. Might test each new stick individually for a bad one. Again, the other solution for an 8BG kit may be the new Kingston HyperX PnP's. Could you post a screenshot of CPUID's CPU-Z Memory & SPD Tab for one of the new sticks?
Added: Actually, screenshots of the old sticks Memory & SPD Tab may be of help too. It may be tRAS or tRFC differences between the two kits. Just speculation at this point though.
All the batchs works perfectly...this is the screen http://imageshack.us/f/163/ramkk.jpg/ ...save and zoom
EDIT: The old stick are SLOT #1 and SLOT #2 ...the new 3 and 4

Strange Problem with creating logical Destination

Similar Messages

Maybe you are looking for