Strange problem with forum

dear sirs,
i do have a strange problem, as i found feb posting on my formum login after making account, can any one confirm what is going wrong...as people posting new can't there
rgds,
shahzad

dear all gurus,
since yesterday i could not see anything in date orders in desc order...like nov/2/04, nov/1/04
is this some setting date issue on forum or some thing wrong there side may be...
can any one help and confirm what is this wrong? as i posted 2-3 articles and i can't find any article in date wise orders
regards,
shahzad

Similar Messages

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

Strange Problem with Forms (Smart Forms)

I have lately been experiencing a strange problem with standard forms in the system. We have WebAS640 / ECC5.0 System. Soon after the initial run of patches, most forms in the system are showing the character '#' in place of formatted texts.
I have searched the internet and most forums, but have not found a solution. Since this is the standard forms that i am talking about (unmodified and untouched) so i assumed this had something to do with our patch levels. However that is only an assumption.
In particular i am having problem with the billing invoice type RD00, form name: LB_BIL_INVOICE. I have traced the problem to this much. The form shows the expected text, where no character format is applied to it. And where ever there is some character format, it just shows a string of hashes ('#'). The style being used by this form is LO_STYLE.
I am also listing my patch levels in case that helps.
SAP_BASIS     640             0014
SAP_ABA             640             0014
ST-PI             003C_640     0001
PI_BASIS     2004_1_640     0006
SAP_BW             350             0012
SAP_HR             500             0005
SAP_APPL     500             0006
PI             2004_1_500     0004
EA-IPPE             300             0004
EA-RETAIL     500             0005
EA-PS             500          0005
EA-HR             500          0005
EA-GLTRADE     500          0005
EA-FINSERV     500          0005
EA-DFPS      500          0005
EA-APPL      500           0005
Hope somebody can help in regard

Hi Ashan!
Interesting problem. You are seeing replacement characters, because assigned font(size) is not installed (somewhere, SAP or printer).
But since this is completely standard, open an OSS-request - maybe it's not as fast as SDN, but I'm sure you will get a qualified answer (and solution).
Regards,
Christian

Strange problem with purple-remote

Hi, I experience a strange problem with purple-remote (program which allow to control Pidgin via D-Bus) :
To get the current status message, you have to type
$ purple-remote getstatusmessage
This works, but when I type
$ echo $(purple-remote getstatusmessage)
this fails with the error
Traceback (most recent call last):
File "/usr/bin/purple-remote", line 238, in <module>
print output
UnicodeEncodeError: 'ascii' codec can't encode character u'\xe9' in position 12: ordinal not in range(128)
Why?
How can this program work in the first case but not in the second?
Thank you
Edit: BTW, is there a workaround to put the output of `purple-remote getstatusmessage' in a variable? $(), redirections and piping doesn't work.
Fractal
Last edited by Fractal (2010-04-04 12:09:56)

Hi Andyh,
Welcome to the forum. How annoying does that sound, if I had to get up every time I wanted to change channel or volume I would crack up.
Drop me an email to [email protected], please include your BT account details and I will see what can be done to help.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Strange problem with Dreamweaver Pop-Up menus

Hello:
I have encountered a very strange problem with DreamWeaver
pop-up menus, and I was wondering if I could get some help from
this forum, as I can't seem to find an answer anywhere else.
The problem involves use of DreamWeaver's pop-up menu
behavior — all works as expected, and my local preview of the
Web page/site works fine, but when I upload the site to a server, I
see extra question mark and "box" characters added to my drop-down
menus. This problem is inconsistent between browsers: Sometimes I
see it only on IE, sometimes I also see it on Firefox.
For example, check out the following URLs:
http://libertycreativesolutions.net/clients/cci/
... this implementation of drop-down menus ("Services"
button, etc.) displays an extra "box" character for each of the
drop-down menu items, but this only occurs in IE -- Firefox is
fine.
http://libertycreativesolutions.net/clients/microtek/HTML/MicroTek_home.html
... this implementation of drop-down menus shows an extra
question mark above the triggering link onMouseOver for Firefox,
and in IE, it shows this "box" character for both the triggering
buttons and for each menu item.
For both of these sites, the pop-up menus work without a
problem *when I'm looking at a local version on my workstation*.
What in the Wide Wide World of Sports is going on here????
Any help for this problem is appreciated.
Note that I stripped out the JavaScript code for menu
information from the <head></head> area of each of
these pages and placed it in a linked JavaScript document.
HELP!

First, you need to read this, written by the person who
adapted that menu
code for Macromedia -
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
Then you need to know that there are MUCH better ways to do
such things -
Check the uberlink and MacFly tutorials at PVII -
http://www.projectseven.com/
and the Navbar tutorial/articles at Thierry's place
http://tjkdesign.com/articles/dropdown/
Or this one (more recent article):
http://tjkdesign.com/articles/Pure_CSS_Dropdown_Menus.asp
Or to get it done fast, go here -
http://www.projectseven.com/tutorials/navigation/auto_hide/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Pomond69" <[email protected]> wrote in
message
news:[email protected]...
> Hello:
> I have encountered a very strange problem with
DreamWeaver pop-up menus,
> and I
> was wondering if I could get some help from this forum,
as I can't seem
> to
> find an answer anywhere else.
>
> The problem involves use of DreamWeaver's pop-up menu
behavior ? all works
> as
> expected, and my local preview of the Web page/site
works fine, but when I
> upload the site to a server, I see extra question mark
and "box"
> characters
> added to my drop-down menus. This problem is
inconsistent between
> browsers:
> Sometimes I see it only on IE, sometimes I also see it
on Firefox.
>
> For example, check out the following URLs:
>
>
http://libertycreativesolutions.net/clients/cci/
> ... this implementation of drop-down menus ("Services"
button, etc.)
> displays
> an extra "box" character for each of the drop-down menu
items, but this
> only
> occurs in IE -- Firefox is fine.
>
>
http://libertycreativesolutions.net/clients/microtek/HTML/MicroTek_home.html
> ... this implementation of drop-down menus shows an
extra question mark
> above
> the triggering link onMouseOver for Firefox, and in IE,
it shows this
> "box"
> character for both the triggering buttons and for each
menu item.
>
> For both of these sites, the pop-up menus work without a
problem *when I'm
> looking at a local version on my workstation*.
>
> What in the Wide Wide World of Sports is going on
here???? Any help for
> this
> problem is appreciated.
>
> Note that I stripped out the JavaScript code for menu
information from the
> <head></head> area of each of these pages
and placed it in a linked
> JavaScript
> document.
>
> HELP!
>

Strange problem with virtual machines backup (Hyper-V 2012R2)

Hi
I have a strange problem with backup of virtual machines in one of my Hyper-V environments. Let me describe how does it looks like: There are two physical servers - HP DL360 G8. They are used as hosts for four virtual machines - domain controllers in two domains.
Each of them runs one DC in every domain. I've configured backup "inside" every virtual machine (with Windows Server Backup tool), in its operating system, because domain controllers should have their system state, regularly backuped, etc. Backup
is made on the network share - all machines to the same server as destination. And now the case - two virtual server are backuped as expected - the operation takes 3 - 4 minutes and is always succeded. But in case of two remaining it looks as below:
- Backup operation starts (is scheduled).
- Volume shadow copy is made.
- The first partition of VM starts to be copied. It's Windows 2012 R2 Generation2 VM, so it has EFI, Recovery and C: partition. EFI is as first and at this moment backup stucks for a 2-3 hours! Progress of copying is 0%. After for example 3 hours this partition
is completed and starts the next (disk C:). And again - it freezes for a few hours and suddenly is pushed. As a result the backup is made successfully, but it takes for example 10 hours.
Both "dodgy" VMs are on separated hosts. All four of them were installed in the same time. I tried to change destination to locally connected disk, but no result. It's interesting as well, that after rebooting VM, the first backup is made normally,
but every next has described problem again. In EventLog I can't find any errors, I don't know how to diagnose such case precisely, etc. Have you got idea what can cause such behaviour or where on the server should I look for some hints?
Thanks
Marcin

Hi Marcin,
>>that after rebooting VM, the first backup is made normally, but every next has described problem again.
It shouldn't happen .
To narrow this issue down , Please try to backup an Gen1 VM and check the result .
Best Regards
Elton JI
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Strange Problems with XDK v10 Beta Version

Hello together,
I encounter two strange problems with the new 10.1.0.0.0 Beta release of XDK. I already posted them in the Beta Release Testing Forum, but got no replies, so I decided to start another try here. Maybe anyone can help me...
I upgraded a fine-working XSQL web application from XDK 9.2.0.4 to the new 10.1.0.0.0 Beta release of XDK. Since then, two bugs came up, which are reproducible by will:
1.)
When processing XSQL insert-requests, the error given below is thrown. I already found an entry in the bug database that says that exactly this error should have been fixed since 9.2.0.3 (see http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230695.1), but no it seems to be there again.
This is the stack trace:
XSQL-017: Unexpected Error Occurred
java.lang.NoClassDefFoundError: oracle/sql/OPAQUE
at oracle.xml.xsql.actions.XSQLInsertRequestHandler.handleAction(XSQLInsertRequestHandler.java:118)
at oracle.xml.xsql.XSQLDocHandler.getDocument(XSQLDocHandler.java:158)
at oracle.xml.xsql.XSQLPageProcessor.process(XSQLPageProcessor.java:171)
at oracle.xml.xsql.XSQLServlet.doGet(XSQLServlet.java:61)
at oracle.xml.xsql.XSQLServlet.doPost(XSQLServlet.java:82)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
2.)
When I deploy and start the application now, I always get the following error only once(!) after deployment when I call the application for the first time:
XSQL-017: Unexpected Error Occurred
java.lang.NullPointerException
at weblogic.jdbc.oci.Statement.executeQuery(Statement.java:865)
at oracle.xml.xsql.actions.XSQLQueryHandler.handleAction(XSQLQueryHandler.java:161)
at oracle.xml.xsql.XSQLDocHandler.getDocument(XSQLDocHandler.java:158)
at oracle.xml.xsql.XSQLPageProcessor.process(XSQLPageProcessor.java:171)
at oracle.xml.xsql.XSQLServlet.doGet(XSQLServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
When I reload the same page, it works. However, this is not really a good state for productive use.
Any ideas? After days of research, I'd be very glad for any help.
Thanks alot,
Eckhard

Once again me:
I guess I should partially revoke for the second topic: The error described above under 2.) seems to be rather a Weblogic versioning problem than a XDK bug, as it only occurs when deploying the application to WebLogic 7.0 (instead of 6.1, which was used before). Maybe I should search the BEA docs for an answer.
However, the first bug is still a problem to me...

Strange problem with Adobe Acrobat X (crash without a trace)

Hi,
I have a strange problem with Adobe Acrobat. It happens totally randomly, it leaves no signs in system logs.
What is happening: during my work Adobe Acrobat sudennly crashes. After a crash I cannot run it again - system seems to do something for a second, but then nothing happends. When i look into taks manager - there are no processes of Acrobat.exe. It just doesn't want to run. What I need to do is to reinstall whole Adobe Acrobat - which requires restart.
I've already tried to restart system after crash, it doesn't help - reinstall is required.
Sometimes everyting is fine for a 3 months, sometimes crash happens a week after the previous one. It also happens in very different situations (somtimes while opening a file, sometimes when doing something simple, sometimes in more complex tasks).
Has anyone encountered a similar problem?
Acrobat version: 10.1.1
System info: Windows 7 64 bit

Hi Kelvin,
Please let me know what OS version you are using.
The error also shows OS requirements not met.
Futher please try the steps below :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Also see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
Regards,
Rave

Strange problem with Subviews on 1.0 Beta

Hi,
I'm having a strange problem with SubViews on 1.0 Beta. I'm not sure If I'm being stupid and have done something wrong, or if there's a problem here.
My application is directly based on one of the examples, so the structure etc is almost identical. I've simplified the files below to avoid confusing the issue.
The default landing page (greeting.jsp) looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<HTML>
<HEAD><title>Insulation Layer Demo</title></HEAD>
<body bgcolor="white">
<f:view>
<jsp:include page="sysstatus.jsp" />

</f:view>
</body>
</HTML>
sysstatus.jsp looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<f:subview id="SystemStatusView">
<h:form id="systemStatusForm">
<h:selectboolean_checkbox id="System1Available" value="#{SystemStatus.system1Available}"/>System 1 
<h:selectboolean_checkbox id="System2Available" value="#{SystemStatus.system2Available}"/>System 2
<h:command_button id="submit" action="success" value="submit" />
</h:form>
</f:subview>When I view this page, the checkboxes all seem to work okay (in that their state is preserved across calls etc), but the formatting is very screwy. The resulting page looks something like:
<chkbox1> <chkbox2> <Submit>
System 1
System 2
<Other HTML content from greeting.jsp>When I look at the HTML source code being generated, it is genuinly being generated as above, that is, all the form tags first, and then the rest of the content. Interestinly, I tried adding a ${SystemStatus.system2Available} into the body text, and it was rendered as literal text (i.e. not evaluated as EL), which is very curious -- makes me wonder if the included file is included as text, rather than JSP, although the custom taglibs and <f:form> tags etc are not in the generated HTML.
If I lift all the content between the <h:form> tags (inclusive) out of sysstatus.jsp and put it in greeting.jsp in place of the <jsp:include> tag, all is well.
Any ideas? All help gratefully recieved!
Thanks,
Paul

Personally, I think it is a bug in the rendering model of JSF itself because if you include any non-JSF tags, they don't get rendered according to my understanding of the what the spec says (in the location the tags are written).
The only workaround that I could come up with is to use straight JSF tags in all of your layers. Things are then rendered the way that they "should" be rendered.
You could try wrapping all of your HTML tags in <f:verbatim> tags and see if that helps.
Good luck!
David

Strange problem with the mail app on an iPad

I've got a bit of a strange problem with the mail app on an iPad - it's sending and receiving mail ok but won't let you delete mail. If you keep at it, it appears as if you have deleted mail (though takes a very long time as you just have to keep deleting it over and over again) - but the size of the app still keeps going up - reached 600mb so far, even though there is hardly any mail or attachments (goes up quite a lot each time you try to delete anything) - any idea what's causing this and how I can fix it?
It occasionally comes up with a dialogue panel saying to check my account settings, but I have checked those and they are fine. The little 'loading' icon just keeps spinning constantly too.

go to Settings > Mail > your account > Advanced > Move Discarded Messages Into
and make sure that Deleted Mailbox is ticked, and not Archive Mailbox
You can also adjust how long the deleted mail stays in the trash immediately below that.
If you are talking about a gmail account, you may also have to login to your account on the gmail server and update the settings there. This is what Barney previously posted about that:

Strange problem with ACLs

Hi,
I have just migrated an oracle database from 11.1.0.7 on Win Server 2003 to 11.2 on Linux 64 bit. I am having a strange problem with ACLs - I can create the ACL but when I perform either of the following two commands:
SELECT * FROM DBA_NETWORK_ACLS
or
SELECT * FROM NET$_ACL
I get no rows returned. The ACL exists somehow because if I try and create it again I get the error that it exists. Has anyone got any advice here? Something is out of sync and I need to know how to fix it up.
Thanks
Adam

BEGIN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
acl => 'email_server_acl.xml',
description => 'Network connection Email Server',
principal => 'MAIL',
is_grant => TRUE,
privilege => 'connect');
END;
PL/SQL procedure successfully completed.
select * from DBA_NETWORK_ACLS;
(no rows)
BEGIN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
acl => 'email_server_acl.xml',
description => 'Network connection Email Server',
principal => 'MAIL',
is_grant => TRUE,
privilege => 'connect');
END;
ORA-31003: Parent /sys/acls/ already contains child entry email_server_acl.xml
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 252
ORA-06512: at line 2
Edited by: Adam J. Sawyer on 15/04/2011 17:08

Some strange problem with Flash/As3

Hi,
I am having some strange problem with my flash cs3.
Whatever script I write in as3 doesn't work, even a stop() function doesn't work . But when I change my publish setting to as2 it works fine.
Not sure about the root cause, may be some setting or preference or my cs3 is corrupted.
Can anybody please advise.
Thanks,
Kishor

try this
create a new fla as3,
select frame 1
open the actions panel
paste in the following code
var squares:Array = new Array;
setup();
function setup():void {
 for (var i = 0; i < 25; i++) {
 var square:Sprite = new Sprite();
 //square.name = "square" + i;
 square.graphics.beginFill(Math.random() * 0xffffff);
 squares.push(square);
 squares[i].graphics.drawRect(0, 0, 100, 100);
 squares[i].x = i*3;
 squares[i].y = i*3;
 squares[i].filters = [];
 square.graphics.endFill();
 stage.addChild(squares[i]);
for (var j = 0; j < squares.length; j++) {
 squares[j].addEventListener(MouseEvent.MOUSE_DOWN, dragMovie);
 squares[j].addEventListener(MouseEvent.MOUSE_UP, dropMovie);
 squares[j].buttonMode = true;
function dragMovie(event:MouseEvent):void {
 event.target.startDrag();
function dropMovie(event:MouseEvent):void {
 event.target.stopDrag();

Strange problem with my ipod 2g after upgrade to os 4.2

Strange problem with my ipod 2g after upgrade to os 4.2
the problem with volume some times when i switch on the ipod i hear the sound
alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
i hope i get help

I would try in order:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backu via iTunes.
- Restore the iPod to factory defaults/new iPod.

Strange Problem with ARD 2.2 *Please Help*

Strange Problem with ARD 2.2 (2 problems)
We have a classroom lab with 14 G5 PPC's running 10.4.11 with ARD 2.2 clients installed.
We controlled all the G5's from a PPC Mac Mini running 10.4.11 with ARD 2.2, this was our Admin machine in our server room.
We then added a teachers machine in the lab, an iMac PPC running 10.4.11 and ARD 2.2 also with admin status.
Everything was working fine!
We then upgraded the iMac PPC to an iMac Intel with 10.4.11. We installed ARD 2.2 admin and did the intel intergration.
Everything worked fine.
The iMac PPC was moved to another location, ARD was removed following instructions on the Apple website telling us to delete the application then run some terminal commands to remove pref's.
Then our Intel iMac screen broke, we had the "lines" problem so bad only half the screen was visible. Long story short Apple wanted to charge us almost half the cost of the machine (no Applecare as it was a donated machine) to repair the screen!
So we moved the PPC iMac back into the lab, re-install ARD 2.2.
Now here is the problem, I can control, observe and run almost any command but cannot share with any computer!
2nd,the Mac Mini Tech computer is running fine but cannot control or observe the PPC iMac teacher machine (we were able to do this before) I can even share the Mac Mini with the iMac but cannot observe or control!!
Any ideas?

"With ARD you have to enable option to control a Mac which has ARD running on it as opposed to remotely controlling normal client Mac."
I'm not sure I understand, do you mean in System Pref's under sharing? Or is there somewhere else I need to enable to control?
Seems like a hassle to reinstall the entire OS just to fix this problem, I am able to do everything else, except observe from one admin to another, and control from 1 admin to clients.
thanks

Strange problem with WD component build

Hi all,
I have strange problem with building one wd component, which is part of SC. I'm getting few errors which stops me from building component (and transporting to other systems via CMS of course). I'm providing sample of the errors (3 types) and ant error:
[code]     [wdgen] [Error]   com.gbs.gmob.RequisitionFoCust --> ContextValueAttribute startDate [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   com.gbs.gmob.RequisitionFoCust --> ContextValueAttribute stopDate [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   com.gbs.gmob.SuppMatGroupView --> TextView MATERIAL_GROUP_NAME_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.gbs.gmob.SuppMatGroupView --> TextView MATERIAL_GROUP_ID_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.gbs.gmob.SupplierCust --> ContextModelNode SuppMatGroup [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Error]   com.gbs.gmob.SupplierCust --> ContextValueAttribute material_group_list [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Warning] com.gbs.gmob.ApprovalRejectView --> TextEdit TextEdit: UIElement does not have a label
     [wdgen] [Info]    Catching throwable null
     [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:153)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2050)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(Generation.java:1299)
     [wdgen]      at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:175)
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:50)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
     [wdgen]      at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:219)
     [wdgen]      at org.apache.tools.ant.Task.perform(Task.java:341)
     [wdgen]      at org.apache.tools.ant.Target.execute(Target.java:309)
     [wdgen]      at org.apache.tools.ant.Target.performTasks(Target.java:336)
     [wdgen]      at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
     [wdgen]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:115)
     [wdgen]      at com.sap.tc.buildplugin.AbstractAntBuildAction.execute(AbstractAntBuildAction.java:65)
     [wdgen]      at com.sap.tc.buildplugin.AbstractPlugin.handleBuildStepSequence(AbstractPlugin.java:225)
     [wdgen]      at com.sap.tc.buildplugin.AbstractPlugin.performBuild(AbstractPlugin.java:201)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
     [wdgen]      at com.sap.tc.buildtool.PluginCommunicator.maybeInvoke(PluginCommunicator.java:114)
     [wdgen]      at com.sap.tc.buildtool.PluginCommunicatorV2.communicate(PluginCommunicatorV2.java:42)
     [wdgen]      at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:354)
     [wdgen]      at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:176)
     [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1726)
     [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:5559)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
     [wdgen]      at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
     [wdgen] ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
     [wdgen] ERROR: Generation failed due to errors (6 seconds)
Ant runtime 9.234 seconds
Ant build finished with ERRORS
[Error]   Generation failed!
Error: Build stopped due to an error: [Error]   Generation failed!
[/code]
Strange is that if I try to rebuild and deploy locally, no errors occurs and I can normally deploy and run application manually!
Does anyone have experience with this problem?
Thanks in advance!
Regards,
Ivan

Hi Ivan
I have faced this problem earlier BUT ultimately I have to create the DC from scratch.
But you can check these things:
1.Have you copy/pasted Dictionary type from other location (check the path of the dictionary types ) --> If yes then deleted that and create again(do not use copy/paste)
2.This also happens if your "Used DC" has some problems in the JDI --> Remove the used DC and add it again.
3.Make sure the NWDI infastructure is perfect- this may be a cause.
4. Check Context mappings --> delete all mappings > save metadata > Create again.
5. Delete the model and recreate it again.
6.If you have done reimporting model make sure to restart J2EE instance.
Hope this solves the problem - if not please post
Regards
Ananda

Strange problem with forum

Similar Messages

Maybe you are looking for