Strange problem with kde 4.12 suggestions

Hi, i have a strange problem with kde 4.12, with the video below is much simple to explain, any idea?
https://drive.google.com/file/d/0B7vmSq … sp=sharing

Some of us experienced crashes after 4.11 update. I am not sure if this is related to your case or not but downgrading some packages solves the issue.
https://bbs.archlinux.org/viewtopic.php?id=168667
https://bbs.archlinux.org/viewtopic.php … 3#p1315493
Last edited by omeringen (2013-09-02 20:13:32)

Similar Messages

Problems with Kde Devil (Bluetooth)

Hi!
I have a very strange problem with Kde Devil. When you open any part of the program I get the cancel button covering most of the window. It is impossible out of the way and when pressed, it cancels everything. I take two Screenshots:
It happens with KDE4. Is there any way to solve it?
Thank you so much

Well, I think I fixed it. I had to tell my phone to forget the headphones, then restart my phone and start all over from scratch. I really hope I don't have to do this every day.

Strange problem with HD

I'm having a strange problem with my titanium 15" Powerbook G4 (I believe it's 867Mhz). When I start it up, I get a flashing question mark/folder, and I can't boot into safe mode or make it start up past that question mark.
Here's the really weird part-- the hard drive is completely fine. I booted it in target mode, was able to access all files on it, transfer files to and from it, and when I ran disk utility, everything was fine.
I heard disk utility doesn't catch everything, so I ran fsck 3 or 4 times with both the -f and -r options (to rebuild the file catalog), and it came up with 0 errors.
I think it's just not recognizing the hard drive as the boot volume, but when I press option on startup to select it, it doesn't pop up in the list-- so there's no way to select it.
Any suggestions?
Thanks!
Tim

I reinstalled Leopard on it using the target disk method (because the DVD drive is broken on the computer). It installed fine, and I can see all system files on it, but I can't boot off of it-- same problem. Thanks for the suggestion... any others?
Tim

Strange problem with linking to external vob-file

I have a strange problem with linking to external vob-file. I
have created a link using BudApi:
on mouseup
set OK = baOpenFile ( the pathname &
"Files\General\Video\VTS_01_1.VOB", "normal")
end
This code opens mpg-videos correctly, but nothing happens
when I try to open vob-files with the same code. The strangest
thing is that when I change the default program for vob-files to
WinDVD this code works and the file opens, but when I change the
default program to Nero Showtime this code doesn't do anything
(when I open the file 'manually' from the folder, it opens
correctly on Nero Showtime). My client uses Nero Showtime, so I
really would appreciate any help on this one.

temes wrote:
>
quote:
Originally posted by:
Newsgroup User
>> When using Nero Showtime as a default program, the
error code is 31,
>> "There is no application associated with the given
filename".
>
> Which suggests that something has gone wrong with file
associations.
> If
> you double-click one of these files in an Explorer
window does it fire
> up Showtime and open the file?
>
>
> Yes, the file opens correctly in Nero Showtime when
double-clicking
> it in an Explorer. I tried the file associations and
created a
> html-page with a link to the vob-file, and the html-link
opens the
> vob-file correcly with Nero Showtime. My client reported
this
> problem, so it's not just my computer which is having
this problem.
If you open a command prompt, do you get an association
listed like this
example for .txt files:
C:\>assoc .txt
.txt=txtfile
C:\>ftype txtfile
txtfile="D:\Program Files\JGsoft\EditPadLite\EditPadLite.exe"
"%1"
Andrew

Strange Problem With Extra Spaces

Hello,
My development staff is experiencing a very strange problem with our JSP pages which display the values from a JDBC result set. We have two environments here: development and production. We have been creating pages in development which work out fine in our development environment. But when we move the page into production, each value which results from the ResultSet getString() method is having multiple blank spaces appended to the end of the value. So, for example, a 5 digit zip code field is really showing up with a length of 8 or 9 because there are extra spaces added to the end of the value.
We are able to work around this problem by using the trim() method, but this is getting quite tedious to do to every single page in the site. It is very annoying because the problem does not exist in the development environment.
So you figure there must be a difference in our development and production environments. But there really isn't. Here is the details for both environments:
OS: Windows NT 4.0
Web Server: Apache with Tomcat setup as a plugin
Database: Sybase ASA 6.0.3
JDK: 1.3
Apache and Tomcat were installed from the same download on both servers. Sybase was installed from the same CD on both servers - and the JDBC Driver (SybDriver) was copied from one server to the next.
Sorry for the long explanation - but does anyone have any idea what could be occurring? Why are the extra spaces being appended to the production pages and not the development pages?
As always, thanks in advance for any suggestions!
-- Chris

Hello Paul,
Thank you for taking the time to analyze this case.
The data in the system comes from two different sources. The first source is a nightly feed from a legacy system. The second source is user input via the JSP application. The records that were inserted from the nightly feed have an accurate length() value (meaning there is no untrimmed spaces trailing along.) But the values coming in from the application have extra spaces appended to them. In the development environment, however, both sources provide properly trimmed data.
If I enter an 8 character last name into the web form in the production app, the value which ends up in the database upon submission will have 2 to 3 extra spaces. I know that this sounds strange - and believe me, it is boggling everyone here. I suspect this problem has to do with the Tomcat installation - even though it was installed identically in each server.
I think we are just going to have live with using the trim() for every database submission. As always, thank you for the help, and all ideas are always welcome.
-- Chris

Strange problem with Transformations Mapping

Hi All,
I am facing a strange problem with respect to the data loading to ods from data source.
I have mapped a field, Number of days which is the difference between posting date and payment date (field in ECC, length char 5) mapped to characteristic zdate_1 length 5 without alpha conversion. (Date difference is calculated in ECC)
When I load data in production it is not fetching the records from PSA (Values exist for this field in PSA).
I have 90 fields in datasource whichbring data to PSA.
Same is working perfectly in Quality and Dev servers.
Where could the problem be?
Please suggest a solution.
Regards
Joga

Any Ideas...

Strange problem with Istant DB

Hello,
i have a strange problem with idb and classloader... if i try to connect to my db using a servlet, i get a ClassNotFoundException, but if i try to connect to it normally, it's all ok...
C:\jwsdp\webapps\ROOT\prova\DB>java DataBase
Enhydra InstantDB - Version 3.26
The Initial Developer of the Original Code is Lutris Technologies Inc.
Portions created by Lutris are Copyright (C) 1997-2001 Lutris Technologies, Inc.
All Rights Reserved.
Database movies is shutting down...
Database movies shutdown complete.
What's the problem??? why
Class.forName("org.enhydra.instantdb.jdbc.idbDriver");
in a servlet application catch a ClassNotFoundException???
this is my classpath:
%JAXP_HOME%\lib\jaxp-api.jar;
%JAXB_LIBS%\jaxb-api.jar;
%JAXB_LIBS%\jaxb-ri.jar;
%JAXB_LIBS%\jaxb-xjc.jar;
%JAXB_LIBS%\jaxb-libs.jar;
%JWSDP_HOME%\common\lib\catalina-ant.jar;
%JWSDP_HOME\common\lib\servlet.jar;
C:\idb\Classes;
C:\idb\Classes\idb.jar;
C:\idb\Classes\idbexmpl.jar;
C:\idb\Classes\jta-spec1_0_1.jar;
C:\j2sdk\lib;
C:\jwsdp\jaxb-1.0\lib;
C:\jwsdp\jaxb-1.0;
C:\jwsdp\jaxb-1.0\lib\jaxb-api.jar;
C:\jwsdp\jaxb-1.0\lib\jaxb-libs.jar;
C:\jwsdp\jaxb-1.0\lib\jaxb-ri.jar;
C:\jwsdp\jaxb-1.0\lib\jaxb-xjc.jar;
Thanks, Marco

There should be a xml configuration file for tomcat, and it should be possible to state additional classpaths there. But I'd suggest to use the pre-configured classpaths. In which directory does your servlet class reside, or where is your document root for the web application of this servlet?
Regards

[Solved] Strange problem with my '/home/evert/Music' folder

Good evening everybody,
I'm having since a few weeks some very strange problems with one directory on my hard disk: '/home/evert/Music/'.
The problem is that this directory excists, with all it's subfolders. But i can't see a single file (mostly mp3's) in that folder or subfolders.
Some more background information to make sure i'm not doing something wrong :
http://pastebin.be/4419 : the log file of a 'mpd --create-db' command. This clearly shows that mpd fills his database with the music. And even more, i'm able to play all that music.
evert@localhost ~/Music $ du --max-depth=1 -h -c | tail -n 1
15G total
So this folder really excists and is filled with a lot of music files normally .
evert@localhost ~/Music/Metallica/loaded $ ls -a
Strange ? In this folder really was music acording to the mpd --create-db log file ?!
drwxr-xr-x 161 evert users 8192 2007-08-10 17:57 Music
As user i'm having all rights to this folder, so that isn't the fault.
Even when trying to see the files, neither konq in su mode or MC works.
Anybody who knows something more about this problem or could help me a bith further pls ? I'm running XFS as filesystem on this partition.
Thanks in advance,
Evert
Last edited by evert_ (2007-08-13 19:23:36)

MrWeatherbee wrote:
shining wrote:You don't have anything in ~/Music/Metallica/loaded but you have stuff in ~/Music/Music/Metallica/loaded
It's really an awful mess, I would suggest you clean your music folders.
Shall he clean his room, too?
If his home is as messy as his $HOME, then yes, totally.

Problem with kde and sound

Hi!
I've a problem with KDE and sound.
When KDE shows a alert the alert's sound sounds with delay. 3-5 seconds.
Same happens with kde start.
Can anybody help me?
Thanks!

Pilli wrote:
Hi!
I've a problem with KDE and sound.
When KDE shows a alert the alert's sound sounds with delay. 3-5 seconds.
Same happens with kde start.
Can anybody help me?
Thanks!
Change the player to mplayer or something in the control panel (Sound and Multimedia - System notifications - Player Settings).

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

Strange problem with Adobe Acrobat X (crash without a trace)

Hi,
I have a strange problem with Adobe Acrobat. It happens totally randomly, it leaves no signs in system logs.
What is happening: during my work Adobe Acrobat sudennly crashes. After a crash I cannot run it again - system seems to do something for a second, but then nothing happends. When i look into taks manager - there are no processes of Acrobat.exe. It just doesn't want to run. What I need to do is to reinstall whole Adobe Acrobat - which requires restart.
I've already tried to restart system after crash, it doesn't help - reinstall is required.
Sometimes everyting is fine for a 3 months, sometimes crash happens a week after the previous one. It also happens in very different situations (somtimes while opening a file, sometimes when doing something simple, sometimes in more complex tasks).
Has anyone encountered a similar problem?
Acrobat version: 10.1.1
System info: Windows 7 64 bit

Hi Kelvin,
Please let me know what OS version you are using.
The error also shows OS requirements not met.
Futher please try the steps below :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Also see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
Regards,
Rave

Strange problem with Subviews on 1.0 Beta

Hi,
I'm having a strange problem with SubViews on 1.0 Beta. I'm not sure If I'm being stupid and have done something wrong, or if there's a problem here.
My application is directly based on one of the examples, so the structure etc is almost identical. I've simplified the files below to avoid confusing the issue.
The default landing page (greeting.jsp) looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<HTML>
<HEAD><title>Insulation Layer Demo</title></HEAD>
<body bgcolor="white">
<f:view>
<jsp:include page="sysstatus.jsp" />

</f:view>
</body>
</HTML>
sysstatus.jsp looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<f:subview id="SystemStatusView">
<h:form id="systemStatusForm">
<h:selectboolean_checkbox id="System1Available" value="#{SystemStatus.system1Available}"/>System 1 
<h:selectboolean_checkbox id="System2Available" value="#{SystemStatus.system2Available}"/>System 2
<h:command_button id="submit" action="success" value="submit" />
</h:form>
</f:subview>When I view this page, the checkboxes all seem to work okay (in that their state is preserved across calls etc), but the formatting is very screwy. The resulting page looks something like:
<chkbox1> <chkbox2> <Submit>
System 1
System 2
<Other HTML content from greeting.jsp>When I look at the HTML source code being generated, it is genuinly being generated as above, that is, all the form tags first, and then the rest of the content. Interestinly, I tried adding a ${SystemStatus.system2Available} into the body text, and it was rendered as literal text (i.e. not evaluated as EL), which is very curious -- makes me wonder if the included file is included as text, rather than JSP, although the custom taglibs and <f:form> tags etc are not in the generated HTML.
If I lift all the content between the <h:form> tags (inclusive) out of sysstatus.jsp and put it in greeting.jsp in place of the <jsp:include> tag, all is well.
Any ideas? All help gratefully recieved!
Thanks,
Paul

Personally, I think it is a bug in the rendering model of JSF itself because if you include any non-JSF tags, they don't get rendered according to my understanding of the what the spec says (in the location the tags are written).
The only workaround that I could come up with is to use straight JSF tags in all of your layers. Things are then rendered the way that they "should" be rendered.
You could try wrapping all of your HTML tags in <f:verbatim> tags and see if that helps.
Good luck!
David

Strange problem with the mail app on an iPad

I've got a bit of a strange problem with the mail app on an iPad - it's sending and receiving mail ok but won't let you delete mail. If you keep at it, it appears as if you have deleted mail (though takes a very long time as you just have to keep deleting it over and over again) - but the size of the app still keeps going up - reached 600mb so far, even though there is hardly any mail or attachments (goes up quite a lot each time you try to delete anything) - any idea what's causing this and how I can fix it?
It occasionally comes up with a dialogue panel saying to check my account settings, but I have checked those and they are fine. The little 'loading' icon just keeps spinning constantly too.

go to Settings > Mail > your account > Advanced > Move Discarded Messages Into
and make sure that Deleted Mailbox is ticked, and not Archive Mailbox
You can also adjust how long the deleted mail stays in the trash immediately below that.
If you are talking about a gmail account, you may also have to login to your account on the gmail server and update the settings there. This is what Barney previously posted about that:

Strange problem with ACLs

Hi,
I have just migrated an oracle database from 11.1.0.7 on Win Server 2003 to 11.2 on Linux 64 bit. I am having a strange problem with ACLs - I can create the ACL but when I perform either of the following two commands:
SELECT * FROM DBA_NETWORK_ACLS
or
SELECT * FROM NET$_ACL
I get no rows returned. The ACL exists somehow because if I try and create it again I get the error that it exists. Has anyone got any advice here? Something is out of sync and I need to know how to fix it up.
Thanks
Adam

BEGIN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
acl => 'email_server_acl.xml',
description => 'Network connection Email Server',
principal => 'MAIL',
is_grant => TRUE,
privilege => 'connect');
END;
PL/SQL procedure successfully completed.
select * from DBA_NETWORK_ACLS;
(no rows)
BEGIN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
acl => 'email_server_acl.xml',
description => 'Network connection Email Server',
principal => 'MAIL',
is_grant => TRUE,
privilege => 'connect');
END;
ORA-31003: Parent /sys/acls/ already contains child entry email_server_acl.xml
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 252
ORA-06512: at line 2
Edited by: Adam J. Sawyer on 15/04/2011 17:08

Some strange problem with Flash/As3

Hi,
I am having some strange problem with my flash cs3.
Whatever script I write in as3 doesn't work, even a stop() function doesn't work . But when I change my publish setting to as2 it works fine.
Not sure about the root cause, may be some setting or preference or my cs3 is corrupted.
Can anybody please advise.
Thanks,
Kishor

try this
create a new fla as3,
select frame 1
open the actions panel
paste in the following code
var squares:Array = new Array;
setup();
function setup():void {
 for (var i = 0; i < 25; i++) {
 var square:Sprite = new Sprite();
 //square.name = "square" + i;
 square.graphics.beginFill(Math.random() * 0xffffff);
 squares.push(square);
 squares[i].graphics.drawRect(0, 0, 100, 100);
 squares[i].x = i*3;
 squares[i].y = i*3;
 squares[i].filters = [];
 square.graphics.endFill();
 stage.addChild(squares[i]);
for (var j = 0; j < squares.length; j++) {
 squares[j].addEventListener(MouseEvent.MOUSE_DOWN, dragMovie);
 squares[j].addEventListener(MouseEvent.MOUSE_UP, dropMovie);
 squares[j].buttonMode = true;
function dragMovie(event:MouseEvent):void {
 event.target.startDrag();
function dropMovie(event:MouseEvent):void {
 event.target.stopDrag();

Strange problem with kde 4.12 suggestions

Similar Messages

Maybe you are looking for