Strange problem with my laptop

When I try to connect to my router with my laptop, it usually lets me just fine. But it wont let me when we have a WEP key on the router. When I go to the Wireless Network Connection it shows our connection and it says "Not Connected" so I go to the bottom right hand corner where i expected it to say "Connect" but it says "Disconnect" and It wont let me go to websites, ect. Whats the problem?
Laptop brand: Averatec
OS: Windows XP sp 2
I cant think of the router right off the top of my head, I can go look at what model it is if it helps, just let me know.

check the model number of the router and from the wired computer , access the router using http://192.168.1.1 .. on the web ui , check the firmware version... if not the latest , upgrade it first .. let me know whether it helps you or not...

Similar Messages

Problems with my laptop starting - Satellite P745, Windows 7

For the past few months I've been having a very strange problem with my laptop. I have a Satellite P745-S4380 with Windows 7. There are times that I can shut it down and turn it on with no problems. However, a majority of the time when I shut my computer down, it will not turn back on. When I push the power button, the following happens:
the power button lights up
the fan starts running
I never see the "Toshiba" screen and my computer does not start
The only way I've gotten my computer to turn back on is to either:
1) unplug my power and let my computer run in this "fan running, power light on" mode until the battery dies - then generally when I plug it back in, it will start right up
or
2) wait 5 to 7 days, then it will start right up
I don't use it on a daily (or even weekly) basis because I am on the computer all day at work, but I would have to guess this started around June. I'm trying to determine if this is something like a motherboard failure, or if it's some sort of software/hardware update that is not setting well with my machine. Has anyone else had this issue? Any ideas on things to even try troubleshooting? I think it may be related to an update or setting (maybe because I don't want it to be the motherboard) because even if I go to reboot it at times, it will shut down but will not come up and it will get hung in the same state as I described above. If my motherboard is bad, would it act like this? I'm at a loss with where to even start...
Something else to mention is that if I put it in "hibernate" mode, I haven't seen this issue.

Hi ! There are many discussions about whether you should shut your PC down or just leave it run. I never allow my PC to go into sleep or hibernate mode. I allow my monitor to shut down after 15 minutes of no activity. I turn my wireless mouse off when I'm done with my PC. When I return to my PC, I turn my mouse on and my PC starts up immediately. That is the way I use my lap top. It's a choice for you to make. I have no proof it it is good or bad practice. Of course this would need to be changed if your operating only on battery.
Dokie!!
http://www.howtogeek.com/128507/htg-explains-should-you-shut-down-sleep-or-hibernate-your-laptop/
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture48.JPG ‏146 KB

Strange problem with new iBook G3 battery

Hi everyone!
I'm facing a strange problem with the new battery I've bought for my 12" iBook G3 800MHz (full specs PowerPC G3 800MHz CPU, 640MB SDRAM 133MHz, DVD-ROM, 20GB HDD, running OSX 10.4.11)..So I've got this laptop two months ago from a friend who wasn't using it anymore, and the original battery was almost dead: 141mAh of maximum charge was giving me about 6 minutes of work. I've recived the new battery yesterday (it was completely charge-less: the indicator lights weren't working), but it has this curious problem: when the iBook is off, it won't charge. I gave it a full charge with the laptop on, up to 100% (4414mAh), and was working fine. But this morning it started going crazy: osx gets bad charge readings, since the percentage jumps randomly from the correct value (and there stays about 2-3 minutes) to 3-4% or 100%. The battery itself is working: only readings are really bad. And there's still the odd "I'm not charging while iBook's off" problem..I'm currently trying to calibrate the battery: could that be the problem? I've already made PRAM, NVRAM and PMU resets..ideas? Thanks

Before sending it back try a PMU and PRAM reset.
http://support.apple.com/kb/ht1379
http://support.apple.com/kb/HT1431

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Strange problem with Adobe Acrobat X (crash without a trace)

Hi,
I have a strange problem with Adobe Acrobat. It happens totally randomly, it leaves no signs in system logs.
What is happening: during my work Adobe Acrobat sudennly crashes. After a crash I cannot run it again - system seems to do something for a second, but then nothing happends. When i look into taks manager - there are no processes of Acrobat.exe. It just doesn't want to run. What I need to do is to reinstall whole Adobe Acrobat - which requires restart.
I've already tried to restart system after crash, it doesn't help - reinstall is required.
Sometimes everyting is fine for a 3 months, sometimes crash happens a week after the previous one. It also happens in very different situations (somtimes while opening a file, sometimes when doing something simple, sometimes in more complex tasks).
Has anyone encountered a similar problem?
Acrobat version: 10.1.1
System info: Windows 7 64 bit

Hi Kelvin,
Please let me know what OS version you are using.
The error also shows OS requirements not met.
Futher please try the steps below :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Also see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
Regards,
Rave

Strange problem with Subviews on 1.0 Beta

Hi,
I'm having a strange problem with SubViews on 1.0 Beta. I'm not sure If I'm being stupid and have done something wrong, or if there's a problem here.
My application is directly based on one of the examples, so the structure etc is almost identical. I've simplified the files below to avoid confusing the issue.
The default landing page (greeting.jsp) looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<HTML>
<HEAD><title>Insulation Layer Demo</title></HEAD>
<body bgcolor="white">
<f:view>
<jsp:include page="sysstatus.jsp" />

</f:view>
</body>
</HTML>
sysstatus.jsp looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<f:subview id="SystemStatusView">
<h:form id="systemStatusForm">
<h:selectboolean_checkbox id="System1Available" value="#{SystemStatus.system1Available}"/>System 1 
<h:selectboolean_checkbox id="System2Available" value="#{SystemStatus.system2Available}"/>System 2
<h:command_button id="submit" action="success" value="submit" />
</h:form>
</f:subview>When I view this page, the checkboxes all seem to work okay (in that their state is preserved across calls etc), but the formatting is very screwy. The resulting page looks something like:
<chkbox1> <chkbox2> <Submit>
System 1
System 2
<Other HTML content from greeting.jsp>When I look at the HTML source code being generated, it is genuinly being generated as above, that is, all the form tags first, and then the rest of the content. Interestinly, I tried adding a ${SystemStatus.system2Available} into the body text, and it was rendered as literal text (i.e. not evaluated as EL), which is very curious -- makes me wonder if the included file is included as text, rather than JSP, although the custom taglibs and <f:form> tags etc are not in the generated HTML.
If I lift all the content between the <h:form> tags (inclusive) out of sysstatus.jsp and put it in greeting.jsp in place of the <jsp:include> tag, all is well.
Any ideas? All help gratefully recieved!
Thanks,
Paul

Personally, I think it is a bug in the rendering model of JSF itself because if you include any non-JSF tags, they don't get rendered according to my understanding of the what the spec says (in the location the tags are written).
The only workaround that I could come up with is to use straight JSF tags in all of your layers. Things are then rendered the way that they "should" be rendered.
You could try wrapping all of your HTML tags in <f:verbatim> tags and see if that helps.
Good luck!
David

Strange problem with the mail app on an iPad

I've got a bit of a strange problem with the mail app on an iPad - it's sending and receiving mail ok but won't let you delete mail. If you keep at it, it appears as if you have deleted mail (though takes a very long time as you just have to keep deleting it over and over again) - but the size of the app still keeps going up - reached 600mb so far, even though there is hardly any mail or attachments (goes up quite a lot each time you try to delete anything) - any idea what's causing this and how I can fix it?
It occasionally comes up with a dialogue panel saying to check my account settings, but I have checked those and they are fine. The little 'loading' icon just keeps spinning constantly too.

go to Settings > Mail > your account > Advanced > Move Discarded Messages Into
and make sure that Deleted Mailbox is ticked, and not Archive Mailbox
You can also adjust how long the deleted mail stays in the trash immediately below that.
If you are talking about a gmail account, you may also have to login to your account on the gmail server and update the settings there. This is what Barney previously posted about that:

Strange problem with ACLs

Hi,
I have just migrated an oracle database from 11.1.0.7 on Win Server 2003 to 11.2 on Linux 64 bit. I am having a strange problem with ACLs - I can create the ACL but when I perform either of the following two commands:
SELECT * FROM DBA_NETWORK_ACLS
or
SELECT * FROM NET$_ACL
I get no rows returned. The ACL exists somehow because if I try and create it again I get the error that it exists. Has anyone got any advice here? Something is out of sync and I need to know how to fix it up.
Thanks
Adam

BEGIN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
acl => 'email_server_acl.xml',
description => 'Network connection Email Server',
principal => 'MAIL',
is_grant => TRUE,
privilege => 'connect');
END;
PL/SQL procedure successfully completed.
select * from DBA_NETWORK_ACLS;
(no rows)
BEGIN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
acl => 'email_server_acl.xml',
description => 'Network connection Email Server',
principal => 'MAIL',
is_grant => TRUE,
privilege => 'connect');
END;
ORA-31003: Parent /sys/acls/ already contains child entry email_server_acl.xml
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 252
ORA-06512: at line 2
Edited by: Adam J. Sawyer on 15/04/2011 17:08

Some strange problem with Flash/As3

Hi,
I am having some strange problem with my flash cs3.
Whatever script I write in as3 doesn't work, even a stop() function doesn't work . But when I change my publish setting to as2 it works fine.
Not sure about the root cause, may be some setting or preference or my cs3 is corrupted.
Can anybody please advise.
Thanks,
Kishor

try this
create a new fla as3,
select frame 1
open the actions panel
paste in the following code
var squares:Array = new Array;
setup();
function setup():void {
 for (var i = 0; i < 25; i++) {
 var square:Sprite = new Sprite();
 //square.name = "square" + i;
 square.graphics.beginFill(Math.random() * 0xffffff);
 squares.push(square);
 squares[i].graphics.drawRect(0, 0, 100, 100);
 squares[i].x = i*3;
 squares[i].y = i*3;
 squares[i].filters = [];
 square.graphics.endFill();
 stage.addChild(squares[i]);
for (var j = 0; j < squares.length; j++) {
 squares[j].addEventListener(MouseEvent.MOUSE_DOWN, dragMovie);
 squares[j].addEventListener(MouseEvent.MOUSE_UP, dropMovie);
 squares[j].buttonMode = true;
function dragMovie(event:MouseEvent):void {
 event.target.startDrag();
function dropMovie(event:MouseEvent):void {
 event.target.stopDrag();

Strange problem with my ipod 2g after upgrade to os 4.2

Strange problem with my ipod 2g after upgrade to os 4.2
the problem with volume some times when i switch on the ipod i hear the sound
alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
i hope i get help

I would try in order:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backu via iTunes.
- Restore the iPod to factory defaults/new iPod.

Strange Problem with ARD 2.2 *Please Help*

Strange Problem with ARD 2.2 (2 problems)
We have a classroom lab with 14 G5 PPC's running 10.4.11 with ARD 2.2 clients installed.
We controlled all the G5's from a PPC Mac Mini running 10.4.11 with ARD 2.2, this was our Admin machine in our server room.
We then added a teachers machine in the lab, an iMac PPC running 10.4.11 and ARD 2.2 also with admin status.
Everything was working fine!
We then upgraded the iMac PPC to an iMac Intel with 10.4.11. We installed ARD 2.2 admin and did the intel intergration.
Everything worked fine.
The iMac PPC was moved to another location, ARD was removed following instructions on the Apple website telling us to delete the application then run some terminal commands to remove pref's.
Then our Intel iMac screen broke, we had the "lines" problem so bad only half the screen was visible. Long story short Apple wanted to charge us almost half the cost of the machine (no Applecare as it was a donated machine) to repair the screen!
So we moved the PPC iMac back into the lab, re-install ARD 2.2.
Now here is the problem, I can control, observe and run almost any command but cannot share with any computer!
2nd,the Mac Mini Tech computer is running fine but cannot control or observe the PPC iMac teacher machine (we were able to do this before) I can even share the Mac Mini with the iMac but cannot observe or control!!
Any ideas?

"With ARD you have to enable option to control a Mac which has ARD running on it as opposed to remotely controlling normal client Mac."
I'm not sure I understand, do you mean in System Pref's under sharing? Or is there somewhere else I need to enable to control?
Seems like a hassle to reinstall the entire OS just to fix this problem, I am able to do everything else, except observe from one admin to another, and control from 1 admin to clients.
thanks

Strange problem with WD component build

Hi all,
I have strange problem with building one wd component, which is part of SC. I'm getting few errors which stops me from building component (and transporting to other systems via CMS of course). I'm providing sample of the errors (3 types) and ant error:
[code]     [wdgen] [Error]   com.gbs.gmob.RequisitionFoCust --> ContextValueAttribute startDate [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   com.gbs.gmob.RequisitionFoCust --> ContextValueAttribute stopDate [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   com.gbs.gmob.SuppMatGroupView --> TextView MATERIAL_GROUP_NAME_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.gbs.gmob.SuppMatGroupView --> TextView MATERIAL_GROUP_ID_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.gbs.gmob.SupplierCust --> ContextModelNode SuppMatGroup [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Error]   com.gbs.gmob.SupplierCust --> ContextValueAttribute material_group_list [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Warning] com.gbs.gmob.ApprovalRejectView --> TextEdit TextEdit: UIElement does not have a label
     [wdgen] [Info]    Catching throwable null
     [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:153)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2050)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(Generation.java:1299)
     [wdgen]      at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:175)
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:50)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
     [wdgen]      at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:219)
     [wdgen]      at org.apache.tools.ant.Task.perform(Task.java:341)
     [wdgen]      at org.apache.tools.ant.Target.execute(Target.java:309)
     [wdgen]      at org.apache.tools.ant.Target.performTasks(Target.java:336)
     [wdgen]      at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
     [wdgen]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:115)
     [wdgen]      at com.sap.tc.buildplugin.AbstractAntBuildAction.execute(AbstractAntBuildAction.java:65)
     [wdgen]      at com.sap.tc.buildplugin.AbstractPlugin.handleBuildStepSequence(AbstractPlugin.java:225)
     [wdgen]      at com.sap.tc.buildplugin.AbstractPlugin.performBuild(AbstractPlugin.java:201)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
     [wdgen]      at com.sap.tc.buildtool.PluginCommunicator.maybeInvoke(PluginCommunicator.java:114)
     [wdgen]      at com.sap.tc.buildtool.PluginCommunicatorV2.communicate(PluginCommunicatorV2.java:42)
     [wdgen]      at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:354)
     [wdgen]      at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:176)
     [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1726)
     [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:5559)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
     [wdgen]      at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
     [wdgen] ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
     [wdgen] ERROR: Generation failed due to errors (6 seconds)
Ant runtime 9.234 seconds
Ant build finished with ERRORS
[Error]   Generation failed!
Error: Build stopped due to an error: [Error]   Generation failed!
[/code]
Strange is that if I try to rebuild and deploy locally, no errors occurs and I can normally deploy and run application manually!
Does anyone have experience with this problem?
Thanks in advance!
Regards,
Ivan

Hi Ivan
I have faced this problem earlier BUT ultimately I have to create the DC from scratch.
But you can check these things:
1.Have you copy/pasted Dictionary type from other location (check the path of the dictionary types ) --> If yes then deleted that and create again(do not use copy/paste)
2.This also happens if your "Used DC" has some problems in the JDI --> Remove the used DC and add it again.
3.Make sure the NWDI infastructure is perfect- this may be a cause.
4. Check Context mappings --> delete all mappings > save metadata > Create again.
5. Delete the model and recreate it again.
6.If you have done reimporting model make sure to restart J2EE instance.
Hope this solves the problem - if not please post
Regards
Ananda

Lightroom doesn't recognize mine camera Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me?

Lightroom doesn't recognize mine camera, the Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me with this issue?
Ronald ( the Netherlands)

Sure the laptop know's that the Nikon D800E is connected, but lightroom doesn't recognise this camera. Two weeks a go it wasn't a problem at all.

Strange Problem with a Vector wraped inside a Hashtable

Hi all ,
I'm having a strange problem with a Vector wraped within a Hashtable inherited Class.
My goal is to keep the order of the elements of the Hashtable so what I did was to extend Hashtable and wrap a Vector Inside of it.
Here is what it looks like :
package somepackage.util;
import java.util.Enumeration;
import java.util.Hashtable;
import java.util.Vector;
public class OrderedHashTable extends Hashtable {
 private Vector index;
 /** Creates a new instance of OrderedHashTable */
 public OrderedHashTable() {
 this.index = new Vector();
//adds a key pair value to the HashTable and adds the key at the end of the index Vector
 public synchronized Object put(Object key,Object value){
 index.addElement(key);
 Object obj = super.put(key,value);
 System.out.println("inside OrderedHashTable Put method index size = " + index.size());
 return obj;
public synchronized Object remove(Object key){
 int indx = index.indexOf(key);
 index.removeElementAt(indx);
 Object obj = super.remove(key);
 return obj;
public synchronized Enumeration getOrderedEnumeration(){
 return index.elements();
public synchronized Object getByIndex(int indexValue){
 Object obj1 = index.elementAt(indexValue);
 Object obj2 = super.get(obj1);
 return obj2;
 public synchronized int indexOf(Object key){
 return index.indexOf(key);
 public synchronized int getIndexSize() {
 return index.size();
 }Everything seemed to work fine util I tried to add objects using a "for" loop such as this one :
private synchronized void testOrderedHashTable(){
 OrderedHashTable test = new OrderedHashTable();
 for (int i = 1 ; i<15; i++){
 System.out.println("adding Object No " + i);
 String s = new String("string number = "+i);
 test.put(new Integer(i),s);
 System.out.println("-----------------------------------");
 //try to list the objects
 Enumeration e = test.getOrderedEnumeration();
 while (e.hasMoreElements()){
 Integer intObj = (Integer) e.nextElement();
 System.out.println("nextObject Number = "+ intObj);
 }Here is the console output :
Generic/JSR179: adding Object No 1
Generic/JSR179: inside OrderedHashTable Put method index size = 1
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 2
Generic/JSR179: inside OrderedHashTable Put method index size = 2
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 3
Generic/JSR179: inside OrderedHashTable Put method index size = 3
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 4
Generic/JSR179: inside OrderedHashTable Put method index size = 4
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 5
Generic/JSR179: inside OrderedHashTable Put method index size = 5
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 6
Generic/JSR179: inside OrderedHashTable Put method index size = 6
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 7
Generic/JSR179: inside OrderedHashTable Put method index size = 7
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 8
Generic/JSR179: inside OrderedHashTable Put method index size = 8
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 9
Generic/JSR179: inside OrderedHashTable Put method index size = 10
Generic/JSR179: inside OrderedHashTable Put method index size = 10
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 10
Generic/JSR179: inside OrderedHashTable Put method index size = 11
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 11
Generic/JSR179: inside OrderedHashTable Put method index size = 12
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 12
Generic/JSR179: inside OrderedHashTable Put method index size = 13
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 13
Generic/JSR179: inside OrderedHashTable Put method index size = 14
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 14
Generic/JSR179: inside OrderedHashTable Put method index size = 15
Generic/JSR179: -----------------------------------
Generic/JSR179: nextObject Number = 1
Generic/JSR179: nextObject Number = 2
Generic/JSR179: nextObject Number = 3
Generic/JSR179: nextObject Number = 4
Generic/JSR179: nextObject Number = 5
Generic/JSR179: nextObject Number = 6
Generic/JSR179: nextObject Number = 7
Generic/JSR179: nextObject Number = 8
Generic/JSR179: nextObject Number = 9
Generic/JSR179: nextObject Number = 9
Generic/JSR179: nextObject Number = 10
Generic/JSR179: nextObject Number = 11
Generic/JSR179: nextObject Number = 12
Generic/JSR179: nextObject Number = 13
Generic/JSR179: nextObject Number = 14
You can notice that the output seems correct until the insertion of object 9.
At this point the vector size should be 9 and the output says it is 10 elements long ...
In the final check you can notice the 9 was inserted twice ...
I think the problem has something to do with the automatic resizing of the vector but I'm not really sure. Mybe the resizing is done in a separate thread and the new insertion occurs before the vector is resized ... this is my best guess ...
I also tested this in a pure J2SE evironment and I don't have the same strange behavior
Can anybody tell me what I am doing wrong or how I could avoid this problem ?
Thanks a lot !
Cheers Alex

Am i doing anything wrong?Uhm, yes. Read the API doc for addElement() and for addAll()

Strange problem with my laptop

Similar Messages

Maybe you are looking for