Strange problem with P35 Neo

Hi there.
Got a strange problem with a computer that got a P35 Neo system board.
The problem I got, is that the computer don't boot. If I reset the CMOS,
I can get the computer to boot, but then it hungs on loading Vista.
Then I try to repair my Vista. Then the computer hungs while loading the DVD.
I have tried to boot with only one RAM in the computer, but the problem still
there...
I have tried to reset the CMOS by changing the JPBAT (I think it called so) jumper
and to pull out the battery.
I have tried to disconnect all, but one HDD and but I can't say that it worked any
better...
Any ideas how to find out the error?
2 x 2 GB Corsair RAM
Intel dual Core CPU
Radeon 1950 PCI-E
1 Samsung SATA HDD
2 Seagate SATA HDD

Quote from: BOSSKILLER on 25-August-08, 20:31:15
What PSU you have? Corsair Powersupply 550W Black, ATX/EPS
Provide better details about memory sticks used. Corsair TWIN2X 6400C4DHX DDR2
What CPU? Intel Core 2 Quad Q6600 2.4 GHz
BIOS version onboard? Note sure, since I'm not right at the computer for the moment. But I think it's 1.0 since it is brand new from store.
Do memory check with >>Memtest86<< Well, it's kind of difficult, since the computer dont boot.

Similar Messages

Multiple problems with P35 Neo Combo-F based system

Friend of mine, after returning from a trip, complained that he couldn't power up his computer. After analysis it was found that his (no-name) PSU was dead. Unfortunately replacing the PSU was not end to the problems. Here are the configuration details:
Mobo: MSI P35 Neo Combo-F v1.0 with v1.7 BIOS
CPU: Intel Celeron 420
RAM: single Transcend JM800QLJ-1G 1GB DDR2-800 module
Video Card: Gigabyte nVidia GV-NX84G256H
HDD: 1xMaxtor STM3250310AS DiamondMax 21 SATA
OS: Microsoft Windows XP SP3
PSU: LC-Power LC7380 PowerSilent Taurus 380W (3,3V: 20A, 5V: 20A, 12V1: 14A, 12V2: 8A)
Other: Pioneer DVD-RW DVR-212D SATA
Problem(s) description:
When powering up, system turns on for a second or two, then like it powers down for roughly the same time, and then turns itself on again and then boots. Not sure if this is double/fake boot "feature", but for single system power up I don't like having HDD powered up twice. This happens for every power up. BIOS has been upgraded to latest 1.7 using MSI Windows utility, after update system has been turned off, power cord removed, BIOS jumper set to clear for couple of minutes, then returned to normal position, returned power, started up the system, loaded optimized defaults, in power management setup's wake up event setup I have disabled "resume by pci device" and "resume by pci-e device" options which were only by default enabled "resume by ..." items.
System is very unresponsive, even after clean install with only motherboard drivers installed (Intel INF). I've checked with Sysinternals Process Explorer, Deferred Procedure Calls process is occupying most (50% - 70%) of the CPU, making "System" (and not "System Idle Process") occupying CPU 100%. I've checked with Spybot 1.6.2 and with Kaspersky AV 2010, there is no malware on the system. Odd thing is that while I'm running latest Microsoft Malicious Software Removal Tool "System" process falls down to 3% of CPU load and system becomes responsive more than ever.
When restarting system, after clean install and before installing any drivers, system would freeze at "Windows is shutting down" screen. Once I install Intel inf motherboard drivers, since then system kind of restarts, screen goes black, but it doesn't boot up again - I have to do a hardware reset.
When shutting down the system, similarly to restart scenario, system kind of shuts down, I can hear HDD is stopped, but system power LED remains on, and both CPU and PSU fans remain on.
Not sure if it is related but I'll mention it anyway, even though I can browse internet and download files with no problem, Windows update and Kaspersky Antivirus 2010 updates barely move from 0% after hours and hours of running (Kaspersky never moves off of the 0%, while Windows Update takes ages to get additional percent of a single ~900KB update)
I've tried replacing that single Transcend memory stick with single Kingston KVR800D2N5/2G DDR2 stick, and replacing graphics card with MSI's R4350-D512H, but in vain. I've also tried putting in 2 Kingston DDR2 sticks, but then system wouldn't boot at all. I've also tried replacing PSU with LC-Power's LC-6550 V2.0 (+3,3V: 30A, +5V: 28A, +12V1: 14A, +12V1: 14A) but it didn't solve anything.
I'm running out of options, any advice would be welcome.
Thanks in advance!
Regards,
Stevo.

Quote
When powering up, system turns on for a second or two, then like it powers down for roughly the same time, and then turns itself on again and then boots.
This is normal behaviour. Nothing to worry about:
Quote
I don't like having HDD powered up twice.
Your HDD is going to be just fine. Todays hard drives are usually built to be able to take 50'000 power-on-Cycles. If you turn on your system once a day, it will take about 68.5 years until you reach that number with that double-boot behaviour. When you power on your system 8 times a day, you will still have to do that for about 8.5 years (each day) until you reach 50'000. That means if your hard drives breaks within the next 5 years (warranty period), it is highly unlikely that this has anything to do with the double-boot behaviour.
Quote
# System is very unresponsive, even after clean install with only motherboard drivers installed (Intel INF). I've checked with Sysinternals Process Explorer, Deferred Procedure Calls process is occupying most (50% - 70%) of the CPU, making "System" (and not "System Idle Process") occupying CPU 100%. I've checked with Spybot 1.6.2 and with Kaspersky AV 2010, there is no malware on the system. Odd thing is that while I'm running latest Microsoft Malicious Software Removal Tool "System" process falls down to 3% of CPU load and system becomes responsive more than ever.
# When restarting system, after clean install and before installing any drivers, system would freeze at "Windows is shutting down" screen. Once I install Intel inf motherboard drivers, since then system kind of restarts, screen goes black, but it doesn't boot up again - I have to do a hardware reset.
# When shutting down the system, similarly to restart scenario, system kind of shuts down, I can hear HDD is stopped, but system power LED remains on, and both CPU and PSU fans remain on.
Quote
OS: Microsoft Windows XP SP3
Did your install CD already include SP3?
Quote
Not sure if it is related but I'll mention it anyway, even though I can browse internet and download files with no problem, Windows update and Kaspersky Antivirus 2010 updates barely move from 0% after hours and hours of running (Kaspersky never moves off of the 0%, while Windows Update takes ages to get additional percent of a single ~900KB update)
This is another indication that your problems is Windows related. There is something wrong with your OS installation. You are talking about a clean OS Installation with no drivers but AV Software and Anti-Spyware stuff installed. This does not sound very healthy.
My suggestion would be to clear CMOS with main A/C power cable removed from PSU, load "Optimized Defaults" in BIOS after that, repartition and format your hard drive from Windows Setup and reinstall Windows XP SP3. When you done, start with installing the latest Intel Chipset drivers (nothing else before that) and then restart your system right after the installation is done. Then install all the other drivers step by step and see if that changes anything.

A problem with p35 neo-combo and DDR3 4GB 1066

HI
i tried upgrading my system to 4 Gig Ram, i bought a DDR3 4GB 1066MHZ single stick from kingston and installed on the A1 slot on the MB.
i just upgraded my bios tot he latest 1.07 version, didn't help either.
i have no clue as to why the sys won't boot. doesn't even pass BIT.
PLZ help. thanks.

Quote from: Henry on 15-November-11, 06:44:56
Buy a 2x2 4GB kit. No reason to use a single channel with 1 stick when you can run dual channel (2 sticks) with a little better performance.
Edit: Don't know how much where you live but for Kingston KVR1066D3S8N7K2/4G is only $23 at newegg in the US.
Something more:
DDR3-1066 (CAS = 7) is not faster than DDR2-800 (CAS = 5)
For this (old) combo mainboard (with dual DDR2/DDR3 controller), 2x2GB DDR2-800 is probably the best choice.

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

Problem with repaired neo fis2r

I am experiencing performance problems with my neo tha t I am not sure where to begin trouble shooting. I had an video card falure(delaminated pin on agp ) which resulted in damage to the agp slot I rma 'd my neo and it returned marked repaired with a grey agp slot , bios 1.4 ( had 1.6 installed) and the same serial #. I reinstalled all components. noted the retrograde bios and flashed to 1.8. then I attempted to return all settings to theyre original state only to find that I can't overclock! previously I got 250mhz clock with perf mode set to ultra turbo and ram set to 333mhz . now I can't get past perf mode fast and 205mhz no matter what. I see references to bios 1.8 as being not very overclockable.this may be the problem but the waters have been muddied by the multitude of events. I am not an expert and do not know where to start. I was so thrilled with the performance of my neo and now I am at a loss . Is the bios responsible for this abysmal performance or is my system still compromised? I don't know what to do to determine its state. my system is as follows:-
neo fis2r( of course)
2.4c p4 with zalman alcu 7000
ati 8500dv
512mb samsung 400mhz ram
seagate barracuda sata 150 raid 0
pci modem card
thermaltake xaser2 case
any suggestions would be greatly appreciated
kev

essentially I am not just concerned about it's current inability to overclock. but more in the fact that b4 the repiar of the board I was able to overclock with no difficulty and no special considerations. in fact when I look at my little log of bios settings the agp clock was set at 66.6/33.3 after all the overclocking. and now with EXACTLY the same components( ati card repalced but physically identical) none of those same settings work. did the failure damage other components whose failure is not yet critical path or has the bios upgrade caused instability?

Strange problem with Adobe Acrobat X (crash without a trace)

Hi,
I have a strange problem with Adobe Acrobat. It happens totally randomly, it leaves no signs in system logs.
What is happening: during my work Adobe Acrobat sudennly crashes. After a crash I cannot run it again - system seems to do something for a second, but then nothing happends. When i look into taks manager - there are no processes of Acrobat.exe. It just doesn't want to run. What I need to do is to reinstall whole Adobe Acrobat - which requires restart.
I've already tried to restart system after crash, it doesn't help - reinstall is required.
Sometimes everyting is fine for a 3 months, sometimes crash happens a week after the previous one. It also happens in very different situations (somtimes while opening a file, sometimes when doing something simple, sometimes in more complex tasks).
Has anyone encountered a similar problem?
Acrobat version: 10.1.1
System info: Windows 7 64 bit

Hi Kelvin,
Please let me know what OS version you are using.
The error also shows OS requirements not met.
Futher please try the steps below :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Also see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
Regards,
Rave

Strange problem with Subviews on 1.0 Beta

Hi,
I'm having a strange problem with SubViews on 1.0 Beta. I'm not sure If I'm being stupid and have done something wrong, or if there's a problem here.
My application is directly based on one of the examples, so the structure etc is almost identical. I've simplified the files below to avoid confusing the issue.
The default landing page (greeting.jsp) looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<HTML>
<HEAD><title>Insulation Layer Demo</title></HEAD>
<body bgcolor="white">
<f:view>
<jsp:include page="sysstatus.jsp" />

</f:view>
</body>
</HTML>
sysstatus.jsp looks like this:
<%@ taglib declarations for HTML and CORE taglibs %>
<f:subview id="SystemStatusView">
<h:form id="systemStatusForm">
<h:selectboolean_checkbox id="System1Available" value="#{SystemStatus.system1Available}"/>System 1 
<h:selectboolean_checkbox id="System2Available" value="#{SystemStatus.system2Available}"/>System 2
<h:command_button id="submit" action="success" value="submit" />
</h:form>
</f:subview>When I view this page, the checkboxes all seem to work okay (in that their state is preserved across calls etc), but the formatting is very screwy. The resulting page looks something like:
<chkbox1> <chkbox2> <Submit>
System 1
System 2
<Other HTML content from greeting.jsp>When I look at the HTML source code being generated, it is genuinly being generated as above, that is, all the form tags first, and then the rest of the content. Interestinly, I tried adding a ${SystemStatus.system2Available} into the body text, and it was rendered as literal text (i.e. not evaluated as EL), which is very curious -- makes me wonder if the included file is included as text, rather than JSP, although the custom taglibs and <f:form> tags etc are not in the generated HTML.
If I lift all the content between the <h:form> tags (inclusive) out of sysstatus.jsp and put it in greeting.jsp in place of the <jsp:include> tag, all is well.
Any ideas? All help gratefully recieved!
Thanks,
Paul

Personally, I think it is a bug in the rendering model of JSF itself because if you include any non-JSF tags, they don't get rendered according to my understanding of the what the spec says (in the location the tags are written).
The only workaround that I could come up with is to use straight JSF tags in all of your layers. Things are then rendered the way that they "should" be rendered.
You could try wrapping all of your HTML tags in <f:verbatim> tags and see if that helps.
Good luck!
David

Strange problem with the mail app on an iPad

I've got a bit of a strange problem with the mail app on an iPad - it's sending and receiving mail ok but won't let you delete mail. If you keep at it, it appears as if you have deleted mail (though takes a very long time as you just have to keep deleting it over and over again) - but the size of the app still keeps going up - reached 600mb so far, even though there is hardly any mail or attachments (goes up quite a lot each time you try to delete anything) - any idea what's causing this and how I can fix it?
It occasionally comes up with a dialogue panel saying to check my account settings, but I have checked those and they are fine. The little 'loading' icon just keeps spinning constantly too.

go to Settings > Mail > your account > Advanced > Move Discarded Messages Into
and make sure that Deleted Mailbox is ticked, and not Archive Mailbox
You can also adjust how long the deleted mail stays in the trash immediately below that.
If you are talking about a gmail account, you may also have to login to your account on the gmail server and update the settings there. This is what Barney previously posted about that:

Strange problem with ACLs

Hi,
I have just migrated an oracle database from 11.1.0.7 on Win Server 2003 to 11.2 on Linux 64 bit. I am having a strange problem with ACLs - I can create the ACL but when I perform either of the following two commands:
SELECT * FROM DBA_NETWORK_ACLS
or
SELECT * FROM NET$_ACL
I get no rows returned. The ACL exists somehow because if I try and create it again I get the error that it exists. Has anyone got any advice here? Something is out of sync and I need to know how to fix it up.
Thanks
Adam

BEGIN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
acl => 'email_server_acl.xml',
description => 'Network connection Email Server',
principal => 'MAIL',
is_grant => TRUE,
privilege => 'connect');
END;
PL/SQL procedure successfully completed.
select * from DBA_NETWORK_ACLS;
(no rows)
BEGIN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
acl => 'email_server_acl.xml',
description => 'Network connection Email Server',
principal => 'MAIL',
is_grant => TRUE,
privilege => 'connect');
END;
ORA-31003: Parent /sys/acls/ already contains child entry email_server_acl.xml
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 252
ORA-06512: at line 2
Edited by: Adam J. Sawyer on 15/04/2011 17:08

Some strange problem with Flash/As3

Hi,
I am having some strange problem with my flash cs3.
Whatever script I write in as3 doesn't work, even a stop() function doesn't work . But when I change my publish setting to as2 it works fine.
Not sure about the root cause, may be some setting or preference or my cs3 is corrupted.
Can anybody please advise.
Thanks,
Kishor

try this
create a new fla as3,
select frame 1
open the actions panel
paste in the following code
var squares:Array = new Array;
setup();
function setup():void {
 for (var i = 0; i < 25; i++) {
 var square:Sprite = new Sprite();
 //square.name = "square" + i;
 square.graphics.beginFill(Math.random() * 0xffffff);
 squares.push(square);
 squares[i].graphics.drawRect(0, 0, 100, 100);
 squares[i].x = i*3;
 squares[i].y = i*3;
 squares[i].filters = [];
 square.graphics.endFill();
 stage.addChild(squares[i]);
for (var j = 0; j < squares.length; j++) {
 squares[j].addEventListener(MouseEvent.MOUSE_DOWN, dragMovie);
 squares[j].addEventListener(MouseEvent.MOUSE_UP, dropMovie);
 squares[j].buttonMode = true;
function dragMovie(event:MouseEvent):void {
 event.target.startDrag();
function dropMovie(event:MouseEvent):void {
 event.target.stopDrag();

Problem with PT8 NEO Y VGA ATI SAPHIRE 9250SE

problem with PT8 NEO Y VGA ATI SAPHIRE 9250SE

From the VGA test report: http://www.msi.com.tw/html/products/mainboard/testreport_pdf/6799/vga.pdf for the board , i can't find ATI Radeon 9250SE , but it is obvious that MSI only tested their Nvidia cards and no ATI cards. So, you'd better to try Nvidia cards or contact your VGA vendor to ask if there is the latest VGA BIOS to solve your issue.
Anyway, remember to tell us the results .

Strange problem with my ipod 2g after upgrade to os 4.2

Strange problem with my ipod 2g after upgrade to os 4.2
the problem with volume some times when i switch on the ipod i hear the sound
alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
i hope i get help

I would try in order:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backu via iTunes.
- Restore the iPod to factory defaults/new iPod.

Strange Problem with ARD 2.2 *Please Help*

Strange Problem with ARD 2.2 (2 problems)
We have a classroom lab with 14 G5 PPC's running 10.4.11 with ARD 2.2 clients installed.
We controlled all the G5's from a PPC Mac Mini running 10.4.11 with ARD 2.2, this was our Admin machine in our server room.
We then added a teachers machine in the lab, an iMac PPC running 10.4.11 and ARD 2.2 also with admin status.
Everything was working fine!
We then upgraded the iMac PPC to an iMac Intel with 10.4.11. We installed ARD 2.2 admin and did the intel intergration.
Everything worked fine.
The iMac PPC was moved to another location, ARD was removed following instructions on the Apple website telling us to delete the application then run some terminal commands to remove pref's.
Then our Intel iMac screen broke, we had the "lines" problem so bad only half the screen was visible. Long story short Apple wanted to charge us almost half the cost of the machine (no Applecare as it was a donated machine) to repair the screen!
So we moved the PPC iMac back into the lab, re-install ARD 2.2.
Now here is the problem, I can control, observe and run almost any command but cannot share with any computer!
2nd,the Mac Mini Tech computer is running fine but cannot control or observe the PPC iMac teacher machine (we were able to do this before) I can even share the Mac Mini with the iMac but cannot observe or control!!
Any ideas?

"With ARD you have to enable option to control a Mac which has ARD running on it as opposed to remotely controlling normal client Mac."
I'm not sure I understand, do you mean in System Pref's under sharing? Or is there somewhere else I need to enable to control?
Seems like a hassle to reinstall the entire OS just to fix this problem, I am able to do everything else, except observe from one admin to another, and control from 1 admin to clients.
thanks

Strange problem with WD component build

Hi all,
I have strange problem with building one wd component, which is part of SC. I'm getting few errors which stops me from building component (and transporting to other systems via CMS of course). I'm providing sample of the errors (3 types) and ant error:
[code]     [wdgen] [Error]   com.gbs.gmob.RequisitionFoCust --> ContextValueAttribute startDate [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   com.gbs.gmob.RequisitionFoCust --> ContextValueAttribute stopDate [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   com.gbs.gmob.SuppMatGroupView --> TextView MATERIAL_GROUP_NAME_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.gbs.gmob.SuppMatGroupView --> TextView MATERIAL_GROUP_ID_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.gbs.gmob.SupplierCust --> ContextModelNode SuppMatGroup [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Error]   com.gbs.gmob.SupplierCust --> ContextValueAttribute material_group_list [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Warning] com.gbs.gmob.ApprovalRejectView --> TextEdit TextEdit: UIElement does not have a label
     [wdgen] [Info]    Catching throwable null
     [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:153)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2050)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(Generation.java:1299)
     [wdgen]      at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:175)
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:50)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
     [wdgen]      at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:219)
     [wdgen]      at org.apache.tools.ant.Task.perform(Task.java:341)
     [wdgen]      at org.apache.tools.ant.Target.execute(Target.java:309)
     [wdgen]      at org.apache.tools.ant.Target.performTasks(Target.java:336)
     [wdgen]      at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
     [wdgen]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:115)
     [wdgen]      at com.sap.tc.buildplugin.AbstractAntBuildAction.execute(AbstractAntBuildAction.java:65)
     [wdgen]      at com.sap.tc.buildplugin.AbstractPlugin.handleBuildStepSequence(AbstractPlugin.java:225)
     [wdgen]      at com.sap.tc.buildplugin.AbstractPlugin.performBuild(AbstractPlugin.java:201)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
     [wdgen]      at com.sap.tc.buildtool.PluginCommunicator.maybeInvoke(PluginCommunicator.java:114)
     [wdgen]      at com.sap.tc.buildtool.PluginCommunicatorV2.communicate(PluginCommunicatorV2.java:42)
     [wdgen]      at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:354)
     [wdgen]      at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:176)
     [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1726)
     [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:5559)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
     [wdgen]      at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
     [wdgen] ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
     [wdgen] ERROR: Generation failed due to errors (6 seconds)
Ant runtime 9.234 seconds
Ant build finished with ERRORS
[Error]   Generation failed!
Error: Build stopped due to an error: [Error]   Generation failed!
[/code]
Strange is that if I try to rebuild and deploy locally, no errors occurs and I can normally deploy and run application manually!
Does anyone have experience with this problem?
Thanks in advance!
Regards,
Ivan

Hi Ivan
I have faced this problem earlier BUT ultimately I have to create the DC from scratch.
But you can check these things:
1.Have you copy/pasted Dictionary type from other location (check the path of the dictionary types ) --> If yes then deleted that and create again(do not use copy/paste)
2.This also happens if your "Used DC" has some problems in the JDI --> Remove the used DC and add it again.
3.Make sure the NWDI infastructure is perfect- this may be a cause.
4. Check Context mappings --> delete all mappings > save metadata > Create again.
5. Delete the model and recreate it again.
6.If you have done reimporting model make sure to restart J2EE instance.
Hope this solves the problem - if not please post
Regards
Ananda

Strange Problem with a Vector wraped inside a Hashtable

Hi all ,
I'm having a strange problem with a Vector wraped within a Hashtable inherited Class.
My goal is to keep the order of the elements of the Hashtable so what I did was to extend Hashtable and wrap a Vector Inside of it.
Here is what it looks like :
package somepackage.util;
import java.util.Enumeration;
import java.util.Hashtable;
import java.util.Vector;
public class OrderedHashTable extends Hashtable {
 private Vector index;
 /** Creates a new instance of OrderedHashTable */
 public OrderedHashTable() {
 this.index = new Vector();
//adds a key pair value to the HashTable and adds the key at the end of the index Vector
 public synchronized Object put(Object key,Object value){
 index.addElement(key);
 Object obj = super.put(key,value);
 System.out.println("inside OrderedHashTable Put method index size = " + index.size());
 return obj;
public synchronized Object remove(Object key){
 int indx = index.indexOf(key);
 index.removeElementAt(indx);
 Object obj = super.remove(key);
 return obj;
public synchronized Enumeration getOrderedEnumeration(){
 return index.elements();
public synchronized Object getByIndex(int indexValue){
 Object obj1 = index.elementAt(indexValue);
 Object obj2 = super.get(obj1);
 return obj2;
 public synchronized int indexOf(Object key){
 return index.indexOf(key);
 public synchronized int getIndexSize() {
 return index.size();
 }Everything seemed to work fine util I tried to add objects using a "for" loop such as this one :
private synchronized void testOrderedHashTable(){
 OrderedHashTable test = new OrderedHashTable();
 for (int i = 1 ; i<15; i++){
 System.out.println("adding Object No " + i);
 String s = new String("string number = "+i);
 test.put(new Integer(i),s);
 System.out.println("-----------------------------------");
 //try to list the objects
 Enumeration e = test.getOrderedEnumeration();
 while (e.hasMoreElements()){
 Integer intObj = (Integer) e.nextElement();
 System.out.println("nextObject Number = "+ intObj);
 }Here is the console output :
Generic/JSR179: adding Object No 1
Generic/JSR179: inside OrderedHashTable Put method index size = 1
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 2
Generic/JSR179: inside OrderedHashTable Put method index size = 2
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 3
Generic/JSR179: inside OrderedHashTable Put method index size = 3
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 4
Generic/JSR179: inside OrderedHashTable Put method index size = 4
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 5
Generic/JSR179: inside OrderedHashTable Put method index size = 5
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 6
Generic/JSR179: inside OrderedHashTable Put method index size = 6
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 7
Generic/JSR179: inside OrderedHashTable Put method index size = 7
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 8
Generic/JSR179: inside OrderedHashTable Put method index size = 8
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 9
Generic/JSR179: inside OrderedHashTable Put method index size = 10
Generic/JSR179: inside OrderedHashTable Put method index size = 10
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 10
Generic/JSR179: inside OrderedHashTable Put method index size = 11
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 11
Generic/JSR179: inside OrderedHashTable Put method index size = 12
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 12
Generic/JSR179: inside OrderedHashTable Put method index size = 13
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 13
Generic/JSR179: inside OrderedHashTable Put method index size = 14
Generic/JSR179: -----------------------------------
Generic/JSR179: adding Object No 14
Generic/JSR179: inside OrderedHashTable Put method index size = 15
Generic/JSR179: -----------------------------------
Generic/JSR179: nextObject Number = 1
Generic/JSR179: nextObject Number = 2
Generic/JSR179: nextObject Number = 3
Generic/JSR179: nextObject Number = 4
Generic/JSR179: nextObject Number = 5
Generic/JSR179: nextObject Number = 6
Generic/JSR179: nextObject Number = 7
Generic/JSR179: nextObject Number = 8
Generic/JSR179: nextObject Number = 9
Generic/JSR179: nextObject Number = 9
Generic/JSR179: nextObject Number = 10
Generic/JSR179: nextObject Number = 11
Generic/JSR179: nextObject Number = 12
Generic/JSR179: nextObject Number = 13
Generic/JSR179: nextObject Number = 14
You can notice that the output seems correct until the insertion of object 9.
At this point the vector size should be 9 and the output says it is 10 elements long ...
In the final check you can notice the 9 was inserted twice ...
I think the problem has something to do with the automatic resizing of the vector but I'm not really sure. Mybe the resizing is done in a separate thread and the new insertion occurs before the vector is resized ... this is my best guess ...
I also tested this in a pure J2SE evironment and I don't have the same strange behavior
Can anybody tell me what I am doing wrong or how I could avoid this problem ?
Thanks a lot !
Cheers Alex

Am i doing anything wrong?Uhm, yes. Read the API doc for addElement() and for addAll()

Strange problem with P35 Neo

Similar Messages

Maybe you are looking for