Strange problem with titles when exporting to Quick Time

I recently finished a project. It includes some simple titles - mostly lower third consisting of 2 lines, left justified. When I export to QT, the centering on the titles mysteriously changes - flipping from left to right. I keep going back to the timeline to double check and even do them over again, but the same thing keeps happening over and over again, often on a different titles. I've also tried copying the timeline to a new project. When I export the files through compressor, a completely different set of titles uncentered themselves. When I go back to the original timeline however, all the settings are correct. This is most aggrivating! I've never had this problem before. Any suggestions appreciated.

No - it's nothing I haven't done before. I'm simply using the Boris Title Crawl with the chalkboard font. Very simple stuff. When I export to a FCP self contained movie, the centering switches from left to right within the shot - so the titles looks animated. When I go back to the original timeline, all the settings are correct. Sometimes if I redo them, the problem corrects itself..but then another title goes off center It makes no sense.

Similar Messages

  • Help me, I have a problem with font when export report to PDF?

    Hi everyone! Help me
    I have a problem with font when export report to PDF
    My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
    when desige template no problem, error only happen when view report by PDF.
    Edited by: user10236405 on Oct 15, 2008 11:23 PM

    give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

  • Final Cut Express Quits when exporting using Quick Time conversion to MPEG2

    I'm new Mac user and I'm trying to compress a movie from Final Cut Express HD when exporting using Quick Time conversion to MPEG2 format when I do that Final Cut application quits.
    and if helps you to answer I have the same problem trying to do the same from iMovie HD and from Adobe Premier 6.5

    "exporting using Quick Time conversion to MPEG2 format"
    I'm not sure how you can get to that point: I cannot even find MPEG2 in my list of compression types while exporting with QuickTime Conversion... (I have 31 of them, and QT 7 Pro installed).
    In any case, if you want to make a DVD and have iDVD installed, you have simply to Export/QuickTime Movie (without conversion): iDVD will take care of compressing your movie for you before burning the DVD.
    Piero

  • Strange problem with reminders when waking iMac

    I'm having a strange problem with reminders in Mountain Lion, and I thought someone might be able to help. If I have a reminder set, and it goes off when my iMac is asleep, after waking the iMac I can't dismiss the reminder. I can click on "Close" or "Snooze" once, and there is the puff of smoke like it has been dismissed, but the notice is still on the screen (even in the Dashboard view), and hover over it only gives the spinning beachball and I can't access notifications with the two finger swipe. So far, restarting my iMac is the only solution I have found to this situation.
    Is anyone else having this happen? Is there an easy solution? Thanks!

    user11000236 wrote:
    Thanks for the info.
    How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
    This is explainted in the above mentioned link:
    Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

  • Strange problem with SQLPLUS when client and server on the same box

    Hi,
    I have the problem with SQLPLUS when clinet and server on the same machine.
    With client and server on the same machine i am running the command
    sqlplus -l username/password@connect_identifier as SYSDBA.
    With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
    Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
    How to get rid of this behaviour. Is there any way to do this.
    I am running this command by creating a process in C#
    Edited by: user11000236 on Jun 16, 2009 10:31 AM

    user11000236 wrote:
    Thanks for the info.
    How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
    This is explainted in the above mentioned link:
    Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

  • FCE crashes when export using Quick Time

    Hi All,
    When I select "Export - Using Quick Time Conversion", FCE crashes. I tried to repair permissions and rebooted but it did not help.
    Export using QT was working fine last week. I did some maintenance checks with Onyx over the weekend. Could it be the problem.
    Any suggestions for fix?
    Thanks.

    2007 MacBookPro
    Mac OSX V10.6.3
    2.2 GHZ Intel Core 2 Duo
    4GB RAM
    FCE Scratch Disk is an external 500GB drive (it has always been and it's been working fine the last 1.5 years) External drive is connected via FW800.
    In Final Cut, I use HDV1440X1080 1080i. Please let me know if you need any other settings.
    I use Quick Time V10.0 (113)

  • No voice-over recording when exporting to Quick Time

    I made a presentation in Keynote 4.0.3 with soundtrack and voice-over recording but when I export to Quick Time movie I can only hear the soundtrack. (The include slideshow recording box was checked). Can anyone help me?

    Hello Ian:
    Welcome to discussions!
    is your exernal drive formatted Mac OS X Extended? it should be.
    Try using Apple's Disk Utility to format the drive. However, when you reformat you will lose all files on the external drive in the process.
    Sue

  • Problem with interlacing when exporting with Media Encoder CS 5.5

    It seems that when exporting a Video with interlacing in Premiere 5.5 with Media Encoder 5.5, the exported video is still interlaced although it is rendered with progressive settings. When rendering with the same settings through Premiere 5.5 without Media Encoder 5.5 (Button "Export") it is correct and progressive.
    I tried this with H264 and MPEG2. Anyone experiencing this problem too?
    Thanx!

    Were the field interpretted correctly in the first place?  Even if you think they are, try reversing them.  I've just been through hell doing something similar with a mishmash of client material from around the world.
    In some instances I switched field order (In the File>Modify) although it didn't seem logical.  In others, I used AE CS5.5 to added the Reduce Interlace Flicker filter.

  • Problems with audio when exporting to movies

    Hi All,
    I teach sequencing and one of the projects is to score a short piece of music to film.  Logic Pro 9 is great for this (though beat mapping isn't the most friendly of functions) and my students (most only 16-18 years old) have made some great projects.
    Right the question is what are the best settings to use when exporting the audio to movie?  Some students don't get any sound when bounced or some are getting the oprginal with the new audio (doubled).
    To assess and store student work we use vimeo for video projects and the wierdest thing is that when uploaded these bounces (the ones that worked) have no sound at all.
    Never had these issues with Logic 8 and just wondering if anyone has any ideas on how I can resolve this?
    Thanks and happy new year.

    I've used flip4mac for about a year and have had no problems with it. I mostly use it to export preview versions for windoze people. The quality is very good, though it takes significantly longer to export than a similar-quality quicktime movie.

  • Problems with EXIF when exporting portrait style pictures.

    So, I just recently upgraded 09 with the intention of using it to organize my photography work. I didn't work much with 08 and didn't have any photos in it so I don't know if this has always been a problem or not. When I import photos that have been shot vertically, in portrait mode, something is being done to the EXIF data, other than it being rotated. My camera has auto-rotate on and they were originally transfered with the software Canon gives you. Anyways, when I export these photos, whether by dragging tot he desktop or File >> Export, and then open it in another program, such as preview, and attempt to view the EXIF data, it's nonexistent. I should mention that these photos were not edited in any way in iPhoto, just imported and then exported. Also, the EXIF data can be viewed in iPhoto, just not anywhere else apparently.
    I've sort of solved the problem just by trial and error but I still don't know what causes it. When I select these photos and use "Revert to Original", they export perfectly and have all the EXIF data. Also, if I edit the photo somehow, enhance, etc., the EXIF seems to come back when I export. This only seems to affect the photos shot in portrait so I can only imagine it has something to do with how iPhoto deals with the autorotate function on already rotated photos. I decided I would try to import directly to iPhoto rather than import from camera with the Canon software and then import into iPhoto to see if it was the Canon software but the same issue occurs. So, my options at this point are to just select all my photos that I import and revert to original or turn off autorotate on my camera and sift through my photos and manually rotate them. The former isn't a huge deal but it would be a lot more convenient if all my EXIF didn't get erased every time I take a portrait shot in and out of iPhoto. Other than that, I don't seem to see any option to change how photos are imported but maybe I'm missing something obvious.
    I was wondering if anyone else has this issue, or if it was a problem in iPhoto '08. If it matters, my camera is a Rebel XT.

    When iPhoto rotates the auto rotated photos from your Canon the modified file that gets creates loses much of the EXIF data. To get the EXIF data included in the file you have to export the file to the desktop via File->Export->File Export and select the option to include the title and keywords.
    Another way is to turn off the auto-rotate in the camera, upload to the desktop first where you can losslessly rotate those files with PhotoTool CM orXee. Then import into iPhoto. That way no modified file is created and if you drag the photo to the desktop you'll be getting the original file which contains the EXIF data.

  • Problems with superscript when exporting to PDF

    If one writes in a table cell for example "100m3 tank" with 3 as a superscript, then exports the document to PDF, the
    "3 tank" disappears, likewise if one just writes "100m3", the 3 disappears. However, if you just write "m3", the three in superscript remains. Any fixes for this bug? How can I report it to Apple?

    I just came across this same problem -- similar but not exactly the same.
    Text in a table does not print properly when text is superscripted.
    This is a problem since we have a French invoice that has a fair bit of superscript. I tried to work around by decreasing the font size and increasing the baseline, but this did not work.
    I'm using Pages 5.1 and Mavericks.
    Anyone have any ideas????

  • Problem with diacritics when export in Acrobat(PDF)

    Hello,
    I use reporting service from Sql Server 2008 R2 and I have a problem when I export in Acrobat(PDF) format. All the 'ș' and 'ț' are after export in pdf just a square.
    Can you please help me. Thanks.

    Hi Alin-g,
    SQL Server 2008 R2 Reporting Services supports Adobe Acrobat 6 or later. So, please make sure your current Acrobat version meets the requirement.
    Besides, the font in the PDF format may be different with that in the HTML rendering extension because GDI font substitution in those formats behaves differently. If there is a font missing on the client, you might see characters replaced with boxes (□).
    For more information, please see:
    Exporting to a PDF File (Report Builder 3.0 and SSRS)
    Regards,
    Mike Yin
    TechNet Community Support

  • Weird audio problems with Motion when exporting quicktime videos

    I have a Motion project with 2 video clips of people talking. When I create a RAM preview everything plays back fine. When I export a quicktime, the first second or so of each video clip (within the quicktime) have no audio. I've adjusted the in and out of each clip in Motion but I don't think that would make the audio disappear on export. Thinking it was just a bad export, I tried just exporting the audio and the same thing happens.
    Here's what i'm using:
    Mac Pro dual 3.0 Xeon
    10 gigs of RAM
    Motion 2.1.2

    hi,
    motion 2 had some odd audio problems that surfaced now and then. The only way round it was to bring the clip into FCP and edit the audio in there, and then export from fcp.
    Motion 3 might have fixed this. Not sure havent had the problem for some time, since I make sure all finnishing is done in FCP.
    hope this helps
    adam

  • Problems with Hyperlinks when exporting to EPUB

    I've been trying to export a CS5 indd to Epub (using corEpub script -http://www.teusdejong.nl/indesign/-), but there seems to be some kind of conflict with Hyperlinks (there's 6000 of them): when they are near to a footnote reference, the text of hyperlinks (and some text surrounding it, don't know the criteria) just disappear and the reference doesn't work. Any ideas about what could be happening?
    (Sorry for my english)

    I just came across this same problem -- similar but not exactly the same.
    Text in a table does not print properly when text is superscripted.
    This is a problem since we have a French invoice that has a fair bit of superscript. I tried to work around by decreasing the font size and increasing the baseline, but this did not work.
    I'm using Pages 5.1 and Mavericks.
    Anyone have any ideas????

  • Problem with Audio when exporting to Quicktime

    I'm running a trial of Adobe Flash CS5 on a Windows PC. I used audio [set to Stream] in the project. The original audio was recorded in 16 bit and 44kHz using Cubase LE4, and was exported in [.wav] format. It works fine and plays back normally when I try 'Test Scene' or 'Test Movie' within Flash. However, the export isn't working right.
    I exported the movie into Quicktime format [.mov]. I set the export audio to 16 bit and 44kHz, which was the same rate that the original sound was recorded in. No matter which audio compression I use, [or without compression at all], the final Quicktime file sounds like it is 8 bit, and the quality is greatly reduced. Just to experiment, I tried exporting with 8 bit audio- at this setting the movie played back with even worse audio quality [and a considerable amount of static], and I am assuming that it has been reduced to 4 bit.
    For some reason, Flash must be cutting the bit rate in half, no matter what settings I use. Does anyone know how to solve this? Any help would be greatly appreciated. 

    Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
    (28341)

Maybe you are looking for

  • Can I use adobe reader with my iPad

    Can I use adobe reader on my iPad

  • PO with Order Acknowledgment

    Hi experts, Please help me with the following: I have created a PO and entered the AB confirmations for this PO. Now I want to reduce the quantity in the PO from 10 PC to 5 PC. I have previously enterd the AB confirmation for 10 PC. Now I get the err

  • Labview 8.5 applicatio​n builder .exe does not run.The same source code runs ok.

    Hi, I have an application built in labview 8.5 application builder using windows XP. I have one instrument connected in gpib and one connected to a serial port. The source code runs ok but when I build  an executable of teh same code and try to run i

  • Static nested class

    Hi there. Im playing around with static nested classes: class OuterC {      int x = 10;      static class Nest {           void doStuff() {                System.out.println("Going");                //System.out.println("Should be allowed print: " +

  • Unlocking an iPhone 5 for student studying abroad/saving contacts

    My son will be studying in China for two years. We have an iPhone 5 for him through Verizon. If we have his iPhone unlocked in the U.S. so that he can use a Chinese cell phone carrier, will he lose all of his contacts?