Strange problems and processer compatibility questions

i have the K7N2 DELTA - ILSR and i have had some problems, ive replaced the borad twice be cause it just died for no apperant reason. One day i was usng it and my webcam was in the second slot on the top of my mainboard and sumthing happend and i couldnt get a picture thru my cam so i switched ports, worked fine no biggie. well i just got an mp3 player, its a nextech, i plug it in my pc and it lagged alto and when it did show up in my computer it would regester it as not there even tho it shows it, i know the mp3 player is fine cause it works fine on my laptop. is my board fuzzeled again or am i just having compatability issues? If so i will exchange it for a gigabyte board i thing cause there reliable and ive had exprence using them.
My other question is i have the amd athlon 2500+xp and i was wondering of the 3200 would work fine on tm K7N2 DELTA - ILSR with the nforce 2 chipset
other than thoes problems the board is great and plays all my games very smoothly.
i also have another question is my Geforce fx 5600 worth keeping or should i upgrade to the 9800 pro or wait for the x 800xt to come down in price?
thx.

a delta can take up to xp3200
but you would be better of with an xp2500 and overclock it instead.
k7n2 has noise sensitive usb ports.
do you have an usb2 hub you can connect to the motherboard and then connect the usb devices to that one and try ?
seen many cases where this worked.
did you read the moan guide ?
its very hard to do something without a complete picture of what you got.
i have seen people having trouble with usb devices for many different reasons.
how strong is the psu ?
i want the amps not the watt as they can show VERY wrong.
is written on a label on the psu. 3.3v 5v and 12v.
have you tried http://www.memtest86.com to check memory ?
k7n2 is memory sensitive.
is usb2 enabled in bios or only 1.1 ?
k7n2 is a very sensitive motherboard but when you get it to work it works like a dream.
mine has been up and running 24/7 since i bought it last year and most crashes i have is when i try to run 10 year old dos games which xp dont like.

Similar Messages

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

Two specific problems and two other questions with Razr Maxx and ICS

Like everyone else, I dl'd ICS this weekend and I've (re)setup things which were there and navigated around fairly well. However, I've noticed a few things to which I can't find an answer.
1.) I have my phone locked via an onscreen password. Before ICS (i.e with GB), when I typed the password, it would not flash the letters/numbers in blue (or whatever color) above the keys as I typed. Now it does. Where do I find the setting so it doesn't?
2.) I have Verizon and before ICS, when I'd send a text to a non-Vzn. user, I'd always get a 'broken' arrow and the delivery was always "Pending" (even though most of the time they actually received the message). When I'd send a text to a Vzn. user, a 'solid' arrow would appear and the Report would show "Received".
Now, no matter if they're a non-Vzn. or a Vzn. user, it never shows "Received". It always shows "Pending".
Is that a bug in the ICS or Vzn. or a combination of both (and does anybody else have that problem, and if so, is there a way to fix it)?
3.) On the top, where it shows '1X' (i.e. 2G), 3G or 4G/LTE, what's the difference between when it appears white color and a blue color?
One other thing - does anybody else notice the on-screen keyboard is different now?
Thanks for anyone's help - I appreciate it.

That Option isn't Available! You can't Mark it Solved any More But you can Give Points as (Correct & Helpful Answers):
That option Went a way when moved From Lithium to Jive.!
Actions
Edit
Move
View as PDF
Receive email notifications
Stop tracking
Legend
Correct Answers - 4 points
Helpful Answers - 2 points
Update: To answer this Further Correct Answers would probably be the Equivalent to Marked Solved But only the OP would be able to Do this and the Post would have to set up as Question type of Post..

Strange problem and clicking sound from speakers!

I have problem with sound but this is strange one and i can't find solution anywhere... I am pretty good with computers and i usualy find solutions on internet when i have problem but this is something i can't solve by myself... My laptop is HP 355 G2 and i have Windows 10 installed on it but the same problem was on Windows 8.1 too... So after clean installation of Win10 the sound was good and worked normaly for 2-3 days and now i only hear a clicking sound from speakers when audio is playing but the strange thing is that when i pick up laptop from the table the sound start to work for few seconds and then the clicking sound comes back again, so i suspect that this has something to do with accelerometer which is built in laptop for hard disc parking in case of drop or something like that... I tryed to uninstal/disable driver for accelerometer but windows install it again emidiatly after reboot, i tryed clean install few times and problem apears again and again... I just don't know anymore what to try to do in order to solve this so if anyone know anything about this please help... And i forgot to say that headphone jack work normaly and when i plug the headphones or external speakers in headphones jack the sound works but the clicking sound still comes out from built in speakers... Thanks in advance and sorry for my English, it is not my native language and there is no support forums on my native language witch is Serbian...

So i tried few more things like disable/enable sound card, driver reinstalation, bitrate changing and everything elese i could find here on forums or on the net (pretty much same stuff like here could be find on internet) and strange thing is that no one have same or similar problem like me... i just don't know anymore what to do...

Streaming problems and some other questions

1) i've read that some people have problems streaming youtube as well as me. but mine is terrible, i can't stream at all. my curve 8900 can barely stream with wifi.......why is this? is there any updates? ALSO, i have version 4.6, can i update this to a more recent blackberry version? if so, where? thank you! x p.s. i just tried with wifi now, and it doesn't stream at all, it says i may have either javascript turned off or old version of adobe flash player........
2) can we not have adobe flash?...because i can't stream any video off any website...
3) through an e-mail i was sent a pdf file and i opened it and i'm not sure if i saved it. if i did save it, where could it be stored? i've looked everywhere!
4) under 'setup' there is an 'interactive' button. what i that for?
5) BLUETOOTH PROBLEM: i've paired it and tried (when to media and done the 'recieve using bluetooth') and it didn't work. so i deleted the pair and tried it without, and still nothing. i've tried fixing some options in settings but still nothing...i think i played with the options a bit too much now...lol. but is there an ideas? please help. also, is there anything in options that i have changed which might be hindering the process (i.e. firewall)?
p.s. i read both manuals that came in the both and the help they provide is all common sense!...they need a more detailed manual in my opinion. Also, is there a number i can call for support/help for my questions regarding my 8900?
thank you! x
Message Edited by mtpac2001 on 08-02-2009 10:03 PM
Message Edited by mtpac2001 on 08-02-2009 10:04 PM

mtpac2001 wrote:
1) i've read that some people have problems streaming youtube as well as me. but mine is terrible, i can't stream at all. my curve 8900 can barely stream with wifi.......why is this?
Many possible reasons -- poor coverage area, old OS, trying to use the full YouTube rather than their mobile site, etc.
mtpac2001 wrote:
is there any updates? ALSO, i have version 4.6, can i update this to a more recent blackberry version? if so, where?
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
mtpac2001 wrote:
2) can we not have adobe flash?...because i can't stream any video off any website...
No. Flash is not available for BB's at the present time. I'm pretty sure that your "any" words are overstated -- perhaps the sites you try cannot stream, but there are others who can stream, so any is a bit over the top.
mtpac2001 wrote:
3) through an e-mail i was sent a pdf file and i opened it and i'm not sure if i saved it. if i did save it, where could it be stored? i've looked everywhere!
Just send yourself another attachment...then pay attention when you save it, then go there and that should be the same place that older PDF should have gone.
mtpac2001 wrote:
4) under 'setup' there is an 'interactive' button. what i that for?
Sorry, no clue...might be something specific from your carrier.
mtpac2001 wrote:
p.s. i read both manuals that came in the both and the help they provide is all common sense!...they need a more detailed manual in my opinion. Also, is there a number i can call for support/help for my questions regarding my 8900?
thank you! x
Your support is, by contract, provided by your carrier...that is how it works. For general use of the devices, these forums are, frankly, the best place as the folks here are other users just like you.
Cheers!
Message Edited by sdgardne on 08-02-2009 02:06 PM
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Clustering problems and load balancing question

          I am using Weblogic 6.1. My Windows NT environment consists of 10 web client-simulator
          machines, 2 App. Server machines and one database server machine. I have defined
          one cluster on each app. server. Each cluster is running 3 Weblogic instances, or
          so it should be when I fix my problems!
          My questions/problems are the following:
          1. Can I use a software dispatcher to perform workload balancing between the 2 weblogic
          clusters? That is, the client-simulator machines send the requests to the software
          dispatcher which performs workload balancing between the 2 Weblogic clusters. The
          clusters perform round-robin amongst all instances. Note that the documentation only
          talks about Hardware Balancing.
          2. I am having problems with my multicast IP addresses. For instance, on one App.
          Server machine, I am using the multicast IP address: 239.0.0.1 for MyCluster. When
          I start the Admin Server, I get a JDBC error: "... multicast socket error: Request
          Time Out". I have used the utils.MulticastTest utility which shows the packets not
          being received:
          I (S1) sent message num 1
          I (S1) sent message num 2
          I (S1) sent message num 3
          I (S1) sent message num 4
          What am I doing wrong?
          3. Re. the cluster configuration:
          NOTE: I have executed my workload using 2 independent App. Server machines with a
          software dispatcher - no clustering. Each App. Server used a jdbc connection pool
          of 84 database connections. The db connections happened to become my bottleneck.
          When I tried to increase the number of connections in the jdbc pool, throughput decreased
          dramatically. Thus, I decided to add a cluster of Weblogic instances to each one
          of my 8 x 900Mhz machines in order to scale up. Unfortunatly, adding clusters have
          not been that simple a task - probably because I am totally new to the Web Application
          Server world!
          Here is what I've got so far:
          I have obtained 3 static IP addresses for the 3 instances of Weblogic instances that
          I wish to run within the cluster. All servers in the cluster use port number 80.
          There is a corresponding DNS entry for each IP address. My base assumption is that
          one of these instances will double up as the Administration Server... Is it true,
          or do I need to define a separate Admin server if I wish to run 3 Weblogic instances
          (each with a connection pool of 84 database connections for a total of 252 database
          connections)?
          Do I need to re-deploy my applications for the cluster? And if so, would this explain
          why I am having problem starting my Admin Server?
          I think this is it for now. Any help will be greatly appreciated!
          Thanks in advance,
          Guylaine.


          Guylaine Cantin wrote:
          > I am using Weblogic 6.1. My Windows NT environment consists of 10 web client-simulator
          > machines, 2 App. Server machines and one database server machine. I have defined
          > one cluster on each app. server. Each cluster is running 3 Weblogic instances, or
          > so it should be when I fix my problems!
          >
          > My questions/problems are the following:
          >
          > 1. Can I use a software dispatcher to perform workload balancing between the 2 weblogic
          > clusters? That is, the client-simulator machines send the requests to the software
          > dispatcher which performs workload balancing between the 2 Weblogic clusters. The
          > clusters perform round-robin amongst all instances. Note that the documentation only
          > talks about Hardware Balancing.
          >
          We also support software load balancers (for e.g. resonate)
          The software dispatcher should be intelligent enough to decode the
          cookie and route the request to the appropriate servers. This is
          necessary to maintain sticky load balancing.
          > 2. I am having problems with my multicast IP addresses. For instance, on one App.
          > Server machine, I am using the multicast IP address: 239.0.0.1 for MyCluster. When
          > I start the Admin Server, I get a JDBC error: "... multicast socket error: Request
          > Time Out". I have used the utils.MulticastTest utility which shows the packets not
          > being received:
          >
          > I (S1) sent message num 1
          > I (S1) sent message num 2
          > I (S1) sent message num 3
          > I (S1) sent message num 4
          > ...
          >
          > What am I doing wrong?
          >
          You should run the above utility from multiple windows and see if each
          of them being recognized or not.
          i.e. java utils.MulticastTest -N S1 -A 239.0.0.1
          java utils.MulticastTest -N S1 -A 239.0.0.1
          > 3. Re. the cluster configuration:
          >
          > NOTE: I have executed my workload using 2 independent App. Server machines with a
          > software dispatcher - no clustering. Each App. Server used a jdbc connection pool
          > of 84 database connections. The db connections happened to become my bottleneck.
          > When I tried to increase the number of connections in the jdbc pool, throughput decreased
          > dramatically. Thus, I decided to add a cluster of Weblogic instances to each one
          > of my 8 x 900Mhz machines in order to scale up. Unfortunatly, adding clusters have
          > not been that simple a task - probably because I am totally new to the Web Application
          > Server world!
          >
          You have to stress test your application several times and set
          maxCapacity of the conn pool accordingly.
          > Here is what I've got so far:
          >
          > I have obtained 3 static IP addresses for the 3 instances of Weblogic instances that
          > I wish to run within the cluster. All servers in the cluster use port number 80.
          > There is a corresponding DNS entry for each IP address. My base assumption is that
          > one of these instances will double up as the Administration Server... Is it true,
          > or do I need to define a separate Admin server if I wish to run 3 Weblogic instances
          > (each with a connection pool of 84 database connections for a total of 252 database
          > connections)?
          BEA recommends to use Admin server for administrative tasks only
          like configuring new deployments, jdbc conn pools, adding users etc..
          It's not a good idea to have admin server part of cluster.
          >
          > Do I need to re-deploy my applications for the cluster? And if so, would this explain
          > why I am having problem starting my Admin Server?
          >
          You have to target all your apps to the Cluster.
          > I think this is it for now. Any help will be greatly appreciated!
          >
          > Thanks in advance,
          >
          > Guylaine.
          >

Initial setup problems and beginner code questions ...please help?

Hi,
Two days ago i started playing around with Java but it has been one pitfall after another for me. I am a visually impaired user, the fun started when i wanted to install the JDK. I think i got EE 5.0 by mistake, but that doesnt even bother me that much. The installer somehow managed to totally elude the screenreader I was using and I needed sighted help to get the thing installed. I think something went wrong with the environment variables during that process because when I first tried compiling a snippet of code it couldn't find Javac. I had to enter:
c:\sun\sdk\jdk\bin\javac.exe c:\saluton.java
to get anything done. I have been trying to learn java using a three-year old copy of teach yourself Java in 24 hours, which might explain my following questions. Here is the code snippet i got from the first chapter:
class Saluton {
public static void main(string[] arguments) {
// my first Java program goes here
String greeting = "Saluton mondo!";
System.out.println(greeting);
This code didn't compile, complaining about Cannot find symbol.
I took out another book, Learning Java, and i got the following code out of this:
public class HelloJava {
public static void main( String[] args ) {
System.out.println("Hello, Java!");
This code did compile, but when i tried:
c:/sun/sdk/jdk/bin/java.exe HelloJava it said the class couldn't be found. I am assuming this has to do with the .class file not being in the folder where it should be, but again I don't know.
I got the JAB (java access bridge) but I had the feeling the info that came with it is rather outdated ...could someone give me some insight on this as well?
Thanks very much for any help you all can provide,
Florian

Hi,
Using your help I've been able to find the error in the saluton mondo program, the caps of the String in the main function declaration was wrong. I have set my Path to the right setting now, and javac and java behave as they should now which is good.
What about my question about the access bridge? How do i use it, exactly? (just telling me where that info can be found is enough really) I'm really confused by all the different .jar files and such ...
Also, once it is installed do i need to somehow ...activate it or reference it in my code to make my apps readable? I would like to see if my program did what I wanted it to do so yeah ...
Thanks for any help,
Florian

Lightroom and processing platform question

I have posted a version of this question on PS, but it is LR where it really matters.
Some eons ago, I was a PS user and found my then-current machine had features which PS was not using. Cannot remember the fine detail, we are talking PS5 or 6...
So, now I am contemplating buying a new i7 based machine with umpteen GB of memory and super graphics board. All these raise questions:can LRuse the speed features of the i7, can they use the umpteen GB, switch into the graphics stuff.
I am fed up with the P4 3.2GHz, 3GB, GeForce 9800GT platform I have - it stumbles and makes me wait (.always Loading... taking seconds). will I end up finding things not much better on a platform potentially 50 times faster? Or is 50 times faster just a dream?
If someone replies that their xxx with yyy goes like lightning, they will not be actually answering the question. I want to know if LR (and PS) can use all the bells and whistles available to them as processes - are they 64-bit so able to use the nnGB... etc etc
Thanks...

LR and PS can use multiple cores, perhaps not all 6 if you get a $1000 CPU--I base that on a benchmark that had LR running the same on both a quad and hex-core although no details were available on what the LR portion of the benchmark was doing. LR and PS both have 64-bit editions.
CS4-PS takes advantage of the GPU for certain things, but LR seems to only be sped up by the OS using the GPU more, not LR using the GPU, specifically, itself.
CS5 and LR3 are just around the corner and we don't know everything GPU-wise they will take advantage of, although there are reports that CS5-Premier Pro will only use CUDA (nVidia) not OpenCL (ATI) because OpenCL is buggy, still.
50-times-faster would be a benchmark that can use all the cores to their fullest, whereas LR does some things in parallel but not nearly everything, so the speedup will vary depending on what you do.
I am about ready to build myself a i7 960 machine and expect LR and PS to be very fast on it. I am not sure if I'll try using an SSD or not for the OS. If I go with what I'm leaning towards at the moment, a Gigabyte GA X58A-UD7, it would likely have USB3 on a couple of the USB ports with a 6Gbps speed that a few peripherals can use. It also has SATA3, which is half that speed, but faster than SATA2. I don't know as I will be overclocking it, much, which depends on the cooling setup, so maybe the MB is overkill and I'll go for something cheaper.
http://www.gigabyte.us/Products/Motherboard/Products_Overview.aspx?ProductID=3344

Posible p4n diamond heat problem and other beep question

Hi was using my p4n diamond for about 2h 30min and it all of a sudden just cuts out with no warning.
im unsure if its heat related thought the constant 55C is not as good temp as i should probably have but it stays stable there.
Also when i recently installed msi core it said i was very close to the voltages it had in the display just to hope to rule out power problems.
i have the cases 120mm exaust fan in the back an 80mm input fan in thefront and then the cpu fan that came with my pentium d 830 .
if its heat related should i get another 80mm fan as an exaust or an 80 mm input fan. i have one more spot on the door of the case.
----other beep question--
I was also wondering about the beeps on my computer. when i first was working with this pcc i had no beeps but then when working i had one beep before os then two after os and usb case plugs and floppy , 3 when i put on a printer and then back to one and then no beeps.
are these my beeps going down related to my heat or is this mother board short lived . one beeps soposed to mean that its loading properly
thanks

regarding your question about target temperature. my board isn't exactly the same as yours, but it's close.
you are right that you can lower the target temp and it will tend to cool the cpu because the fan runs faster at a lower temperature. the way i set up mine was to DISABLE the target temp and that gives the fan full voltage at all temps. that way, the fan rpm will bottom out at 2250rpm (instead of 1100rpm up to the target temp) or so even at lower temps.
also keep in mind that your cpu temp in the bios disply should be a few degrees HIGHER than the temp in "idle windows".
the intel data sheet for the pentium D 8xx series says that the max temp is 69C. so your cpu shouldnt have a problem at 55C.
i ran a prime95 primality test for about 17 hours at 60C to test stability (while using the computer for my normal foreground tasks) and didn't have a problem. i'm NOT recommending this. but i wanted you to know that this cpu doesn't have a problem with temps in the 60C range. and that msi motherboard will stand up to rough treatment.
also, in my humble opinion, i would NEVER run those msi windows utilities. they may be causing you a problem with stability. i use speedfan from almico to monitor temps and i have it set up to generate sound and visual warnings at certain temps. the F1 docs are good. if it were my system, i would go so far as to reinstall windows and format the C: to get rid of core center. i wouldn't even trust the uninstall unless you're good enough to surgically remove it manually.
also make sure you turn off EIST in the bios. it wont impact your temps significantly. that nvidia nforce sli intel edition has a problem with 14x multiplier and pentiumD. and EIST bumps you down to 14x occaisionally.

K8N Diamond plus HSF and memory compatability question

I am considering this board since I need a good onboard sound chip to utilize my front breakout box. At this time I have an opteron 180, a Zalman 7700 and 2 gb kit of Corsair XMS TWINX2048-3500LLPRO on the way from ZZF. I had planned on using this on an Asus A8N SLI deluxe but if the hardware is compatible I would rather have the SB onboard than the Realtek on the Asus.
Does anyone know if the Zalman will fit on this board and clear the northbridge heatsink and fan? I had seen in another post the the MSI boards might not care for Corsair to well, any validation on this?
Thanks!

Tricker61,
As you can see by my signature I am using the Diamond Plus with a full two pair of TWINX2048-3500LLPRO’s.
It was not plug them in a go, but it just requires setting the memory up manually, which is really set forward.
The only problem is that the current BIOS do not the memory to SPD values and here is a list of setting you will have to set manually.
(1)   FSB/Memory Ratio is set by default to 1:2, which needs to be changed to 1:1.
(2)   Memory Module Voltage Corsair spec is 2.7 – 2.9, default BIOS setting is 6.5V. I am running mine at 2,75V.
(3)   Corsair spec timing 2,3,2,6, BIOS Default is 2,3,2,5 so you need to set that.
As far as memory set for your Corsair memory you have they are working fine and system is stable.
You wanted 2.6 GHz; I am currently run FSB of 225 MHZ and with default multiplier of x12, which is one BIOS defaults that is correct. My system running solid at 2.7 GHz and the memory is running DDR450, which better the Corsair spec.
Therefore, with the memory modules you should get the performance you said you wanted. I feel with all the memory setting corrected I could running it up more, first 225 MHz is the speed I could not make with default BIOS setting and I am not and Over-clocker like you, if want a good solid fast system.
If you have not purchased a case yet, make it a big one with lots of fans. I am using the Cooler Master CM Stacker 810 and have just moded the case to add two extra right side 120mm input fans in place of the stock 80mm fan and I am just starting to get the system temperatures under control. With to two new fans that makes 4 120mm input fans and 120mm, 85mm and the power supplies 135mm fan for exhaust. I have been using 120mm fan with 35 to 40 CFM each, to try and keep the noise down, but it looks like an a few more CFM to input fans and put up with the added. But it is a nice system now, you the noise of the air flow , but no actual fan sounds, except for the Graphics Card when is cycles it fan to high speed, which much less with two add right side 120mm fans.
Hope this information helps you selecting components for your new system.
Roger
When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings. It is almost impossible to estimate what your problem is without knowing something about it.

P67A-C45 (B3) CPU and Memmory Compatibility Question

(sorry to my english)
Hi all i hawe 2 queestions i have CPU G630 and memorry (RAM) work to 1333MHZ if i activated in bios XMP to work on 1600 i have some problems stop working on windows, My friends tell g630 dont suport 1600ram
i dont have more money but i wont to give my cpu to friend and buy G860 becose my friend have it and i see he work with 1600MHZ but he have Z77 MB not as mine (,
1 will work my RAM on 1600MHz if i put G860 CPU to my MB?
2 i see to Global site have update bios 22nm to this mb is really posible this ? if i wont a 22nm cpu need to upgrade or bios in not for my MB ? becose on start this mb is for 32 nm?
MSI P67A-C45(B3)
Intel G630 2x2,7
Kingston Blue 2x4gb ram 1600MHZ
.....

if my P67A-C45(B3) work with Intel Core i3 2130 tray or CPU Intel Pentium G860 on Ram X.M.P. 1600MHZ i will buy some this but not wont to risk
if upgrade i sell mb+cpu and buy next
if Z77A-G43 or G45 i buy Intel® Core™ i3 3240 i dont like SLI or owerclocking and mabby is G43 low cost
if Z87-G43 i buy Intel Core i5-4570 Haswell but is to hight costs mb and cpu and have some problems with money.
i ask you all becose to my country Moldova we dont have more money on job to buy extrime somfing and i wont last tehnologis to me ))) i like Z87-G43 is good but not have some low cost cpu (
I'm afraid that MSI will go strictly by 1150 socket, and will only continue to develop them, and forget about 1155

Broken link; and a compatability question?

Howdy,
1. The PetStore 2.0 page
BluePrints: Code: http://java.sun.com/blueprints/code/index.html
appears to contain a borken link to:
Java Pet Store 2.0 Early Access: https://blueprints.dev.java.net/petstore/
... or is the petstore closed due to the economic downturn?
2. Will JRE 1.6_7 and Netbeans 6.1 suffice for the Petstore 2.0 sample ? Or should I upgrade everything before I start?
3. Do "The Sun Dudes" read this forum?
Cheers all. Keith.

Check what card you have and then go to the manufacturer's website and check there if your graphics card is OpenGl enabled.
If it is, download the corresponding driver from the manufacturer's website and install it on your system.
Some downloads are compresses (zipped), so you have to unzip and then install.

Strange Errors and Process Names - Time Machine?

Can anyone tell me if they have ever seen a process name like this? [0x0-0x46e46e].com.apple.systempreferences
What is the scope on the [0x0-0x46e46e] in front of the com?
See the log line below.
Terry
10/9/12 12:36:32.177 PM [0x0-0x46e46e].com.apple.systempreferences: 2012-10-09 12:36:32.176 System Preferences[4158:303] starting scanNetBootImages
10/9/12 12:36:32.193 PM [0x0-0x46e46e].com.apple.systempreferences: 2012-10-09 12:36:32.191 readconfig[4328:60b] isInterfaceBuiltin IOServiceGetMatchingService
10/9/12 12:36:32.197 PM [0x0-0x46e46e].com.apple.systempreferences: 2012-10-09 12:36:32.196 readconfig[4328:60b] isNetBootable IOServiceGetMatchingService
10/9/12 12:36:32.201 PM [0x0-0x46e46e].com.apple.systempreferences: 2012-10-09 12:36:32.200 readconfig[4328:60b] isInterfaceBuiltin IOServiceGetMatchingService
10/9/12 12:36:32.205 PM [0x0-0x46e46e].com.apple.systempreferences: 2012-10-09 12:36:32.204 readconfig[4328:60b] isNetBootable IOServiceGetMatchingService

same issue here... any solutions other than starting a back up over again?

My new budget box: some USB problems, and CPU multiplier question

hey, just put together my "new" pc for $130! had some old stuff to put in it, specs are:
msi k7n2 delta2-lsr
athlon xp 2800+ 333mhz barton
(the rest here is old stuff that's still running fine)
crucial ram: 1x 512, 1x256, both 266mhzl
160gb maxtor hd
radeon all-in-wonder 7500
sound blaster audigy
case (2 fans plus an air duct leading to the processor)w/350w power supply,
it's mainly for an entertainment center, going in/out to/from a 5.1 reciever, tv, dvd player, the works.
maybe some light gaming too, nothing harder to run than halo.
i had to reuse the d-bracket from my old k7n266 board, the new one didn't come with one. :(
and for some reason its usb ports do not work: neither do my two front usb ports that are built
into the case. the onboard ports all seem to work, andwindows shows in device manager:
standard enhanced pci to usb controller (x1),
standard openhcd usb host controller (x2),
and usb root hub (x3). pretty sure that means they all should work? i've swapped the plugs
around with no luck anyway. i was mainly wondering if there's some bios setting i've overlooked
to get these working, if not, anyone have any other ideas?
also wondering where i should set my cpu multiplier, i generally understand that it's 166mhz *12.5 with
this processor, does that sound about right? i haven't set the muliplier yet in the bios, i just left it at
"cpu default". i'm waiting to get a new cpu fan before i mess with that. i was wondering if my admittedly
slow ram is at risk with either of these settings, i'm not looking to buy more anytime soon (my laptop
is my "real" computer anyway, handles doom3 pretty well). actually i'm kind of confused on the
motherboard's fsb: it's supposed to be 400mhz, but it only goes up to 200 settable in bios? or is that
400mhz calculated only in windows, when you get the nforce2 drivers going?

CPU multipliers on the bartons are locked. You need to do a mod to be able to change it.
With your memory being 266MHz that will hold you back. You may be able to overclock it so it is running the 333MHz but your system may become unstable. You may want to consider getting PC2700 memory or better.
As far as the USB, make sure you do not have pin 10 plugged in (there is no connector for pin 9). There are some topics talking about this. Just do a quick search. Or as phextor mentioned there are some stickys about it. Read through them and try the suggestions, if that doesn't work post back and we will try to get it taken care of. As far as bios settings on some I know there is an option on how many USB ports are in the system. This is usually under integrated peripherals. Make sure it is at 8 ports or all.
Good Luck
Jeremy

Boot Up problems and 2 other questions

I am a newbie here.
My X300 boots up to the windows desktop fairly quickly, but I am not able to connect wirelessly until the wireless network connection icons on the bottom right finally load and appear which take at least 3-5 minutes.
Does anyone know what could be causing the delay in loading the network connection icons?
Also,
The dvd burner that was included in my X300 has died. anyone know the correct part number so I can replace it?
THANKS!
I currently have 3 Thinkpads
2008 X300
2006 X60S
2004 T41

Welcome to the forums
What other programs run at startup when you log into vista?
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Strange problems and processer compatibility questions

Similar Messages

Maybe you are looking for