Strange Problems With Curves and VC Color Vibrance

I am having a very odd issue. I was working fine, adding new solids and using curves of VC Color Vibrance to color them, and out of the blue it just stopped working. I simply cannot add color. The values and curve lines are still 100% editable, but the color does not show up. The closest it gets is when I apply a mask: The color outlines the mask. Any help? Mac OS Creative Cloud 2014.

It is not an adjustment layer. I used command+Y (if that is the answer you were looking for).
I'm not quite sure what you mean by change the reference color, if you mean the option labeled "Color" that does not work. Otherwise, it used to work fine up until this new layer. I didn't change anything about it. Thank you for the quick response!
Neo

Similar Messages

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

Strange problem with DatagramSocket and DatagramPacket.

Hi!
I got a strange problem with UDP sockets:
Client (hardware device) send binary data messages, consisting of bytes and shorts fields (8 and 16 bits). But when I tried to read byte array, received from socket, I got some type anomaly. For example:
byte[] buffer = new byte[1024];
DatagramPacket packet = new DatagramPacket(buffer, 1024);
socket.receive(packet);
byte[] data = packet.getData();
System.out.println("Received data:");
for (int i = 0; i < packet.getLength(); i++) {
System.out.printf("%h:", data);
I got such thing: 34:4:fffffff1:ffffffdb:ffffffdc:20:1:1:0:2:50
If I try to parse it using ByteArrayInputStream and DataInputStream
ByteArrayInputStream is = new ByteArrayInputStream(packet.getData());
DataInputStream dis = new DataInputStream(is);
int head = dis.readByte();
int recvinfo = dis.readByte();
short count = (short)dis.readShort();
System.err.printf("Decoded:\n head: %h\n recvinfo: %h\n count: %h\n",
head, recvinfo, count);i got following:
Decoded:
head: 34
recvinfo: 4
count: fffff1db
So I get Integer entries in byte?! array. I also got Integer even I try to read and cast it as short in short!!! variable.
Please help!
P.S. Sorry for my bad English.

Rather fortunate that it auto-casts(or rather, that 0xFF is int by default, rather than attempting any type-detection as most languages do), as otherwise the brackets would have been in the wrong place. If it was still a byte after the "& 0xFF", sign extension would still occur.
For the sake of the less bit-literate reading this thread, it should be explained that the reason for this was large bytes being interpreted as negative numbers, which translate to negative int, which in hexa become very large ints. That's about as verbose as I can be about this without writing the equivalent of a wikipedia entry about 2s complement.

Strange problem with RDP and mouse, only solved after minimize/maximize

Good day,
We have this very annoying problem with a RDP Terminal Server. It is Windows Server 2008 R2 SP1.
This server has the Session Host role installed, with local RDP user licenses.
We only have this issue when running a certain application.
This application is called Rockwell FactoryTalk View and this in an application to display industrial processes.
It will take the Full Screen in a fixed resolution and will display buttons, objects, values... The application also uses Internet Explorer cache so I think it uses ActiveX, Flash or Java, I don't know.
What sometimes happens is this:
- The mouse point is able to move in the entire screen (good)
- The mouse button will only work in 1 certain area of the screen (which is a small rectangle)
- The mouse "hovering" above objects will also only highlight items that are in this rectangle
- The keyboard remains functional and with alt-tab other objects or other applications can get focus, but still no mouse clicking
The problem can be solved by:
- Minimizing the RDP window and maximizing it again
- Or: Sending a message to the session using task manager, after clicking "OK" on that message the problem is gone
Normally, about 5 users will have this application opened in their session, the "crash" is only effecting 1 session.
The problem seems to happen randomly and we don't know if we should point to the FactoryTalk application, or to Terminal Services/RDP. The end users have no rights to minimize/maximize, this is not the solution.
Is it possible to have any input on this please?
Thank you.

Hi,
Thank you for posting in Windows Server Forum.
Firstly please check with the application support team whether the application is fully supported by Windows Server 2008 R2 in remote session. In addition, suggest you to update the client RDP version to RDP 8.1 and check the result for better feature and functionality.
Apart from this, there is Hotfix for the issue. Please download, install and check the result.
Cause:
The issue occurs because the remote desktop ActiveX object does not deactivate the focus of the remote desktop session when the focus is lost. Because the focus is still activated, the remote desktop ActiveX object cannot set the focus of the remote desktop
session again when you change the focus back to the session.
A remote desktop session does not respond to keyboard input or mouse input after it loses the focus in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2579381
Hope it helps!
Thanks.
Dharmesh Solanki

Strange problem with Outlets and Collection View Items

This is a strange issue. I am using XCode 3.2.2 and I am building a Collection View. To do this I have a non-document based application that uses Core Data.
*Collection View Item Class*
I created a new class that inherits NSCollectionViewItem and built it to have an outlet to the Label.
*Collection View Item NIB*
I created a Empty NIB for my Collection View Item. To the NIB I added a Custom View object and set the Class Identity to NSBox. I then added a Label to the new NSBox. I changed the File Owner to the new class and connected the "view" outlet to the new NSBox and the Label to the label outlet.
*Main Menu NIB*
I added a new NSCollectionViewItem object to the Main Menu NIB and set the Class Identity to the new class mentioned above. I then set the NIB Name to the name of the NIB mentioned above. In the window I added a NSCollectionView then set its Item Prototype to the new NSCollectionViewItem object I just configured. This is the typical way to set up a collection view with its item in a different NIB.
*Back to the problem*
Everything seem to work well except that in the setRepresentativeObject in the Collection View Item class when it attempts to set the Label to a value. Nothing happens. When I check closely I find that the Label is coming back nil. It is properly linked. I deleted everything and rebuilt the collection view item and relinked everything without success.
*How I made it work but not happy with it*
I have finally made this work by simply putting the line "[self view];" just before I attempt to run "[label setStringValue:name];". If I remark out the "[self view];" the label returns nil. I have a note near the line to make it easier to spot. It seems that I should not need to access the superclass's "view" accessor just to access one of view's subviews. Is this a bug or have I written this wrong?
The Collection View Item code is below. Any help is appreciated.
Thanks,
Rob
#import <Cocoa/Cocoa.h>
#import "PersonManagedObject.h"
@interface PersonSelectionViewItem : NSCollectionViewItem {
NSTextField *label;
#pragma mark Finalizers
- (void)dealloc;
#pragma mark Outlets
@property (nonatomic, assign) IBOutlet NSTextField *label;
#pragma mark Instance Methods
- (void)configureKeyValueObserving;
- (void)removeKeyValueObserving;
#pragma mark Overrides
- (void)setRepresentedObject:(id)representedObject;
- (void)observeValueForKeyPath:(NSString *)keyPath ofObject:(id)object change:(NSDictionary *)change context:(void *)context;
@end
#import "PersonSelectionViewItem.h"
@implementation PersonSelectionViewItem
#pragma mark Finalizers
- (void)dealloc{
[self removeKeyValueObserving];
[super dealloc];
#pragma mark Outlets
@synthesize name;
#pragma mark Instance Methods
- (void)configureKeyValueObserving{
PersonManagedObject *person = (PersonManagedObject *)[self representedObject];
[person addObserver:self forKeyPath:@"lastNameFirstName" options:0 context:NULL];
- (void)removeKeyValueObserving{
PersonManagedObject *person = (PersonManagedObject *)[self representedObject];
[person removeObserver:self forKeyPath:@"lastNameFirstName"];
#pragma mark Overrides
- (void)setRepresentedObject:(id)representedObject{
[super setRepresentedObject:representedObject];
NSString *personName = (NSString *)[representedObject valueForKey:@"lastNameFirstName"];
[self view]; //<---Without this line the "label" variable 2 lines down will be nil.
if (personName) {
[label setStringValue:personName];
[self configureKeyValueObserving];
- (void)observeValueForKeyPath:(NSString *)keyPath ofObject:(id)object change:(NSDictionary *)change context:(void *)context{
if ([keyPath isEqualToString:@"lastNameFirstName"]) {
[[self label]setStringValue:[object valueForKey:@"lastNameFirstName"]];
} else {
[super observeValueForKeyPath:keyPath ofObject:object change:change context:context];
@end

I think you must be correct. I just ran into the problem again in yet another NIB. It was in the setRepresentedObject method. I simply put in the same line "\[self view\]" just before I needed to set the value of the view component and it worked again. If it is the same in other components I guess I just need to pay attention to it. Thanks for the information.
Message was edited by: Cycles4Fun

Problem with cfdocument and background colors with table borders

i am having a great deal of difficulty with cfdocument
rendering my tables with cells that have background colors. the
background colors seem to bleed through the table border. a picture
at 100% magnification can be seen at
http://www.vitad.com/cfdoc.jpg
and at 1600% magnification at:
http://www.vitad.com/cfdoc2.jpg.
i am attaching sample code of the what generated the pdf in the
pictures. btw, i am running cfmx 7 with hot fix 2.

Hi fresher4flex,
Since you are using the item Renderer for the DataGrid Column try to apply the styles dynamically to the background of your itemRenderer by making using of the rollOver and rollOut events.
Thanks,
Bhasker

Two very STRANGE problems with JWindow and JTextField

I am having some trouble in the program that I am making. It is a Swing based GUI.
I have a JWindow with a JPanel in it that holds JTextFields and JLabels.
problem1----I can't see a caret in any of the textfields but I can still enter text.
problem2----If I control + tab to another window, and control + tab to get back to the JWindow then I can see a caret, but the caret will not change if I click on another textfield and also I can't move to another textfield to enter text. If i do another control tab, then the textfield that i tried to switch to will have focus, but there is now two carets...the first one is where I was but that field does not have focus. I can do this control-tab for as many textfields as I need to fill, but it obviously is not practical.
I am using a call to super(Frame frame) when calling my JWindow but that didn't seem to fix it.
Any help would be great!!!!! thanks john

try checking out this thread :
http://forum.java.sun.com/thread.jsp?forum=57&thread=153344
sounds like your problem, kinda. it looks more like a repaint issue, since u get two carets at the same time - as if the screen isn't refreshing enough (u could give it some Spearmint POLO :)

SOLVE strange problem with suspend and resume with gnome-power-manager

I have pm-utils and gnome installed.
Suspending and hibernation works well from the command line ($ pm-hibernate and $ pm-suspend). Resuming works without any problems.
Suspending from gnome "Shutdown dialog" works perfectly as well.
However, if suspending is initiated by gnome-power-manager something strange happens: After pressing the power button resuming switches to hibernation and my laptop turns off. Resuming from disk works fine again.
Now, suspending works fine again if I change and save any config file in /etc/pm/.
Here comes the strange thing: It doesn't really matter what I change as long as I save it.
However, as soon as I reboot resuming fails again the way I described above.
Anyone have a clue what's going on?
I get no error messages and I've tried all sorts of boot entries.
Last edited by mehldutt (2007-12-26 19:42:31)

After some try and error my guess is that "HAL" is responsible for this problem:
I deinstalled ACPID and 'pm-utils' and switched to 'uswsusp'.
I made the appropriate changes to the appropriate hal-scrips
usr/lib/hal/scripts/hal-system-power-suspend:
#!/bin/sh
/sbin/s2ram --force
usr/lib/hal/scripts/hal-system-power-hibernate:
#!/bin/sh
/sbin/s2disk
After these changes I still have the same problem: immidiatly after resuming form suspend (via power-button) my laptop hibernates (s2disk).
However, if I delete all entries in "usr/lib/hal/scripts/hal-system-power-hibernate" resuming from suspend works fine again, but hibernate doesn't of course. So, some script must be calling "usr/lib/hal/scripts/hal-system-power-hibernate" emmediatly after resuming from suspend.
A couple of weeks ago everything worked fine. My guess is that one of the recent hal-updates is causing this.
How can I figure what script is calling "usr/lib/hal/scripts/hal-system-power-hibernate" after resuming from suspend?

Strange Problem with FCP and Quicktime

Hi,
I finished an edit off yesterday and expotrted in 2 ways ones a uncompressed Quicktime movie. (I am running FCP so it's called an FCP movie) and a compressed version botth are 2' 42" long.
When I import the compressed verion back in it plays fine. When I import the uncompressed FCP/QT movie back in the time line stops and starts. The audio plays, but the video element just won't play properly. I am running QT 7. Does anyone have any thoughts why?
cheers, Dame

Hey Man,
We don't have a lot of luck explaining stuff to each other do we! Remember when I had problems over exporting FCP as a QT uncompressed movie. You were getting a bit shouty as you thought I wasn't listening and it turned out in FCP 3 to export as a QT uncompressed is actually called Final Cut Pro Movie in the Export Options?
Anyway, I meant I was having problems importing an uncompressed QT via a firewire on to my timeline. But in a strange backwards sort of way, by doing the complete opposite of what you suggested, you pointed me in the right direction!
Thanks for your help once again buddy.
Dame

[SOLVED] Problem with shell and escape colors

Ok, here what I do
[danbst@localhost ppp]$ export | grep ps -i
declare -x PS1="[\\u@\\h \\W]\\\$ "
declare -x PS2="> "
declare -x PS3="> "
declare -x PS4="+ "
[danbst@localhost ppp]$ export PS1="[\\u \033[0m @\\h \\W]\\\$ "
[danbst @localhost ppp]$
[danbst @localhost ppp]$
[danbst @localhost ppp]$
[danbst @localhost ppp]$ expo
[danbst @localhost ppp]$ expo
[danbst @localhost ppp]$
[danbst @localhost ppp]$ expoexport PS1="[\\u \033[0m @\\h \\W]\\\$ "
[danbst @localhost ppp]$
U can see some "expo" in console. How I've done that?
press UP arrow, then down
4 chars from command history stay there
when I press UP again, this 4 chars stay still. shit.
My guess is prompt counts escape color chars, \033[0m - total 4 chars so length is sized.
Have anybody had this? Do anybody know how to repair?
Last edited by danbst (2011-02-12 21:54:25)

I think it's just a glitch in redrawing the screen. '\033[0m' is the reset code, but you haven't set anything :-)
If you want a yellow prompt, try
PS1='\[\e[0;33m\][\u@\h \W]\$\[\e[0m\] '
You can add spaces if you like:
PS1='\[\e[0;33m\][\u @\h \W]\$\[\e[0m\] '
Of course you can
export PS1="[\\u@\\h \\W]\\\$ "
to return to your old prompt.
References:
https://wiki.archlinux.org/index.php/Color_Bash_Prompt
http://ascii-table.com/ansi-escape-sequences.php
Last edited by karol (2011-02-12 21:12:18)

Problem with axis2 and Tomcat

Hello,
I am having a strange problem with Tomcat and axis. I have a webservice that uses axis2 for wsdl2java class generation. When I compile my project in maven a Test is performed. During the test a glassfish server is established and the project is deployed -everything work great with the expected results. However when I try to deploy the webservice on tomcat it has some problems.
At first I tried to call axis code in a POST method that takes a MultiPart message. The code is as below:
*@Path("identifyWavestream")*
*@POST*
*@Consumes(MediaType.MULTIPART_FORM_DATA)*
*@Produces(MediaType.APPLICATION_XML)*
*public String multipartTest(com.sun.jersey.multipart.MultiPart multiPart) throws Exception {*
*// get first body part (index 0)*
*//tomcat shows that the first error is here (line 122 is the nest one with bodypart)*
BodyPart bp = multiPart.getBodyParts().get(0);
BodyPartEntity bodyPartEntity = (BodyPartEntity) bp.getEntity();
InputStream stream = bodyPartEntity.getInputStream();
*//the rest of the code either saves the incoming file or implements the wsdl2java axis interface - neither works.*
And the tomcat error is:
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
java.util.ArrayList.RangeCheck(Unknown Source)
java.util.ArrayList.get(Unknown Source)
com.webserv.rest.resources.SearchResource.test.multipartTest(SearchResource.java:122)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
java.lang.reflect.Method.invoke(Unknown Source)
com.sun.jersey.server.impl.model.method.dispatch.EntityParamDispatchProvider$TypeOutInvoker._dispatch(EntityParamDispatchProvider.java:138)
com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:67)
com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:124)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:71)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:63)
com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:555)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:514)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:505)
com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:359)
javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
It was strange to me since this simple approach of handling a Multipart method worked for me earlier. Then I decided skip the handling of multipart method and just call the axis code. But the results also caused an error. I then tried to call the axis code in a simple @GET method (to cross out any issues regarding the multipart) and the result where the same. Again everything works on the maven- glassfish test. In this case the tomcat error is the following:
javax.servlet.ServletException: java.lang.NoSuchMethodError: org.apache.commons.httpclient.HttpConnectionManager.getParams()Lorg/apache/commons/httpclient/params/HttpConnectionManagerParams;
com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:361)
javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
root cause
com.sun.jersey.api.container.MappableContainerException: java.lang.NoSuchMethodError: org.apache.commons.httpclient.HttpConnectionManager.getParams()Lorg/apache/commons/httpclient/params/HttpConnectionManagerParams;
com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:74)
com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:124)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:71)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:63)
com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:555)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:514)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:505)
com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:359)
javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
root cause
java.lang.NoSuchMethodError: org.apache.commons.httpclient.HttpConnectionManager.getParams()Lorg/apache/commons/httpclient/params/HttpConnectionManagerParams;
org.apache.axis2.transport.http.AbstractHTTPSender.initializeTimeouts(AbstractHTTPSender.java:454)
org.apache.axis2.transport.http.AbstractHTTPSender.getHttpClient(AbstractHTTPSender.java:514)
org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:156)
org.apache.axis2.transport.http.HTTPSender.send(HTTPSender.java:75)
org.apache.axis2.transport.http.CommonsHTTPTransportSender.writeMessageWithCommons(CommonsHTTPTransportSender.java:371)
org.apache.axis2.transport.http.CommonsHTTPTransportSender.invoke(CommonsHTTPTransportSender.java:209)
org.apache.axis2.engine.AxisEngine.send(AxisEngine.java:448)
org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:401)
org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:228)
org.apache.axis2.client.OperationClient.execute(OperationClient.java:163)
com.webserv.rest.webapp.IntSoapServiceStub.getServerData(IntSoapServiceStub.java:2447)
com.webserv..rest.resources.AIntSoapImpl.getServerData(AIntSoapImpl.java:112)
com.webserv..rest.resources.SearchResource.test.pingTest(SearchResource.java:167)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
java.lang.reflect.Method.invoke(Unknown Source)
com.sun.jersey.server.impl.model.method.dispatch.EntityParamDispatchProvider$TypeOutInvoker._dispatch(EntityParamDispatchProvider.java:138)
com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:67)
com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:124)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:71)
com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:63)
com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:555)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:514)
com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:505)
com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:359)
javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
I think it is also a good ide to post the pom.xml file :
Edited by: 803864 on 2010-10-21 00:30

I think it is also a good ide to post the pom.xml file:
+<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"+
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
+<modelVersion>4.0.0</modelVersion>+
+<groupId>com.myProjects</groupId>+
+<artifactId>audioid-rest-interface</artifactId>+
+<packaging>war</packaging>+
+<name>AudioID Rest Interface</name>+
+<version>0.1</version>+
+<dependencies>+
++
+<dependency>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>jersey-multipart</artifactId>+
+<version>1.0.1</version>+
+</dependency>+
+<dependency>+
+<groupId>com.sun.jersey</groupId>+
+<artifactId>jersey-client</artifactId>+
+<version>1.0.1</version>+
+</dependency>+
+<dependency>+
+<groupId>com.sun.jersey</groupId>+
+<artifactId>jersey-bundle</artifactId>+
+<version>1.0.1</version>+
+</dependency>+
+<dependency>+
+<groupId>commons-logging</groupId>+
+<artifactId>commons-logging</artifactId>+
+<version>1.0.4</version>+
+</dependency>+
+<dependency>+
+<groupId>commons-collections</groupId>+
+<artifactId>commons-collections</artifactId>+
+<version>3.1</version>+
+</dependency>+
+<dependency>+
+<groupId>org.slf4j</groupId>+
+<artifactId>slf4j-log4j12</artifactId>+
+<version>1.5.6</version>+
+</dependency>+
+<dependency>+
+<groupId>junit</groupId>+
+<artifactId>junit</artifactId>+
+<version>3.8.2</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>org.glassfish.distributions</groupId>+
+<artifactId>web-all</artifactId>+
+<version>10.0-build-20080430</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>org.glassfish.embedded</groupId>+
+<artifactId>gf-embedded-api</artifactId>+
+<version>1.0-alpha-4</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>com.sun.jersey</groupId>+
+<artifactId>jersey-server</artifactId>+
+<version>1.0.3.1</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>maven-wadl-plugin</artifactId>+
+<version>1.0.3.1</version>+
+</dependency>+
+<dependency>+
+<groupId>org.hibernate</groupId>+
+<artifactId>hibernate</artifactId>+
+<version>3.2.5.ga</version>+
+<exclusions>+
+<exclusion>+
+<groupId>javax.transaction</groupId>+
+<artifactId>jta</artifactId>+
+</exclusion>+
+<exclusion>+
+<groupId>cglib</groupId>+
+<artifactId>cglib</artifactId>+
+</exclusion>+
+</exclusions>+
+</dependency>+
+<dependency>+
+<groupId>org.apache.axis2</groupId>+
+<artifactId>axis2</artifactId>+
+<version>1.4.1</version>+
+</dependency>+
++
+<dependency>+
+<groupId>org.apache.axis2</groupId>+
+<artifactId>axis2-aar-maven-plugin</artifactId>+
+<version>1.4.1</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>org.apache.axis2</groupId>+
+<artifactId>axis2-java2wsdl</artifactId>+
+<version>1.4.1</version>+
+<scope>test</scope>+
+</dependency>+
+<dependency>+
+<groupId>org.apache.axis2</groupId>+
+<artifactId>axis2-xmlbeans</artifactId>+
+<version>1.4.1</version>+
+</dependency>+
++
+<dependency>+
+<groupId>com.sun.xml.bind</groupId>+
+<artifactId>jaxb-impl</artifactId>+
+<version>2.1.12</version>+
+</dependency>+
+<dependency>+
+<groupId>cglib</groupId>+
+<artifactId>cglib-nodep</artifactId>+
+<version>2.1_3</version>+
+</dependency>+
+</dependencies>+
+<build>+
+<finalName>audioid-rest-interface</finalName>+
+<plugins>+
+<plugin>+
++
++
+<groupId>com.sun.tools.xjc.maven2</groupId>+
+<artifactId>maven-jaxb-plugin</artifactId>+
+<version>1.1</version>+
+<executions>+
+<execution>+
+<phase>generate-sources</phase>+
+<goals>+
+<goal>generate</goal>+
+</goals>+
+</execution>+
+</executions>+
+<configuration>+
+<generatePackage> com.webserv.wsparameters</generatePackage>+
+<schemaDirectory>../audioid-rest-interface/src/main/resources+
+</schemaDirectory>+
+<includeSchemas>+
+<includeSchema>**/*.xsd</includeSchema>+
+</includeSchemas>+
+<extension>true</extension>+
+<strict>false</strict>+
+<verbose>false</verbose>+
+</configuration>+
+</plugin>+
+<plugin>+
+<groupId>org.apache.maven.plugins</groupId>+
+<artifactId>maven-javadoc-plugin</artifactId>+
++
+<executions>+
+<execution>+
+<goals>+
+<goal>javadoc</goal>+
+</goals>+
+<phase>compile</phase>+
+</execution>+
+</executions>+
+<configuration>+
+<encoding>UTF-8</encoding>+
+<verbose>false</verbose>+
+<show>public</show>+
+<subpackages> com.webserv.rest.rest.resources: com.webserv.rest.rest.commons: com.webserv.wsparameters+
+</subpackages>+
+<doclet>com.sun.jersey.wadl.resourcedoc.ResourceDoclet</doclet>+
+<docletPath>${path.separator}${project.build.outputDirectory}+
+</docletPath>+
+<docletArtifacts>+
+<docletArtifact>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>wadl-resourcedoc-doclet</artifactId>+
+<version>1.0.3.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>com.sun.jersey</groupId>+
+<artifactId>jersey-server</artifactId>+
+<version>1.0.3.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>xerces</groupId>+
+<artifactId>xercesImpl</artifactId>+
+<version>2.6.1</version>+
+</docletArtifact>+
+</docletArtifacts>+
+<additionalparam>-output+
+${project.build.outputDirectory}/resourcedoc.xml</additionalparam>+
+<useStandardDocletOptions>false</useStandardDocletOptions>+
+</configuration>+
+</plugin>+
+<plugin>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>maven-wadl-plugin</artifactId>+
+<version>1.0.3.1</version>+
+<executions>+
+<execution>+
+<id>generate</id>+
+<goals>+
+<goal>generate</goal>+
+</goals>+
+<phase>compile</phase>+
+</execution>+
+</executions>+
+<configuration>+
+<wadlFile>${project.build.outputDirectory}/application.wadl+
+</wadlFile>+
+<formatWadlFile>true</formatWadlFile>+
+<baseUri>http://192.168.2.149:8080/${project.build.finalName}+
+</baseUri>+
+<packagesResourceConfig>+
+<param> com.webserv.rest.resources</param>+
+</packagesResourceConfig>+
+<wadlGenerators>+
+<wadlGeneratorDescription>+
+<className>com.sun.jersey.server.wadl.generators.WadlGeneratorApplicationDoc+
+</className>+
+<properties>+
+<property>+
+<name>applicationDocsFile</name>+
+<value>${basedir}/src/main/doc/application-doc.xml</value>+
+</property>+
+</properties>+
+</wadlGeneratorDescription>+
+<wadlGeneratorDescription>+
+<className>com.sun.jersey.server.wadl.generators.WadlGeneratorGrammarsSupport+
+</className>+
+<properties>+
+<property>+
+<name>grammarsFile</name>+
+<value>${basedir}/src/main/doc/application-grammars.xml</value>+
+</property>+
+</properties>+
+</wadlGeneratorDescription>+
+<wadlGeneratorDescription>+
+<className>com.sun.jersey.server.wadl.generators.resourcedoc.WadlGeneratorResourceDocSupport+
+</className>+
+<properties>+
+<property>+
+<name>resourceDocFile</name>+
+<value>${project.build.outputDirectory}/resourcedoc.xml</value>+
+</property>+
+</properties>+
+</wadlGeneratorDescription>+
+</wadlGenerators>+
+</configuration>+
+</plugin>+
+<plugin>+
+<groupId>org.codehaus.mojo</groupId>+
+<artifactId>exec-maven-plugin</artifactId>+
+<version>1.1</version>+
+<executions>+
+<execution>+
+<goals>+
+<goal>java</goal>+
+</goals>+
+</execution>+
+</executions>+
+<configuration>+
+<mainClass>com.sun.jersey.samples.generatewadl.Main</mainClass>+
+</configuration>+
+</plugin>+
+<plugin>+
+<groupId>org.apache.maven.plugins</groupId>+
+<artifactId>maven-compiler-plugin</artifactId>+
+<inherited>true</inherited>+
+<configuration>+
+<source>1.5</source>+
+<target>1.5</target>+
+
+
+</configuration>+
+</plugin>+
+<plugin>+
+<groupId>org.jvnet.jaxb2.maven2</groupId>+
+<artifactId>maven-jaxb2-plugin</artifactId>+
+<executions>+
+<execution>+
+<goals>+
+<goal>generate</goal>+
+</goals>+
+</execution>+
+</executions>+
+</plugin>+
+<plugin>+
+<groupId>org.apache.axis2</groupId>+
+<artifactId>axis2-wsdl2code-maven-plugin</artifactId>+
+<version>1.4.1</version>+
+<executions>+
+<execution>+
+<id>generate reco core</id>+
+<goals>+
+<goal>wsdl2code</goal>+
+</goals>+
+<configuration>+
+<packageName>com.webserv.rest.webapp</packageName>+
+<wsdlFile>src/main/java/com/webserv/wsdl/web.wsdl</wsdlFile>+
+<databindingName>adb</databindingName>+
+</configuration>+
+</execution>+
+</executions>+
+</plugin>+
+<plugin>+
+<groupId>com.sun.tools.xjc.maven2</groupId>+
+<artifactId>maven-jaxb-plugin</artifactId>+
+<version>1.1</version>+
+<executions>+
+<execution>+
+<goals>+
+<goal>generate</goal>+
+</goals>+
+</execution>+
+</executions>+
+<configuration>+
+<generatePackage>com.webserv.wsparameters</generatePackage>+
+<schemaDirectory>src/main/xsd</schemaDirectory> <includeSchemas>+
+<includeSchema>**/*.xsd</includeSchema> </includeSchemas>+
+<extension>true</extension>+
+<strict>false</strict>+
+<verbose>true</verbose>+
+</configuration>+
+</plugin>+
+</plugins>+
+</build>+
+<profiles>+
+<profile>+
+<id>jdk-1.5</id>+
+<activation>+
+<jdk>1.5</jdk>+
+</activation>+
+<dependencies>+
+<dependency>+
+<groupId>com.sun.xml.bind</groupId>+
+<artifactId>jaxb-impl</artifactId>+
+<version>2.1.10</version>+
+</dependency>+
+</dependencies>+
+<build>+
+<plugins>+
+<plugin>+
+<groupId>org.apache.maven.plugins</groupId>+
+<artifactId>maven-javadoc-plugin</artifactId>+
+<configuration>+
+<docletArtifacts>+
+<docletArtifact>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>maven-wadl-plugin</artifactId>+
+<version>1.0.3.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>com.sun.jersey.contribs</groupId>+
+<artifactId>wadl-resourcedoc-doclet</artifactId>+
+<version>1.0.3.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>com.sun.jersey</groupId>+
+<artifactId>jersey-server</artifactId>+
+<version>1.0.3.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>xerces</groupId>+
+<artifactId>xercesImpl</artifactId>+
+<version>2.6.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>javax.xml.bind</groupId>+
+<artifactId>jaxb-api</artifactId>+
+<version>2.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>javax.xml</groupId>+
+<artifactId>jaxb-impl</artifactId>+
+<version>2.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>javax.activation</groupId>+
+<artifactId>activation</artifactId>+
+<version>1.1</version>+
+</docletArtifact>+
+<docletArtifact>+
+<groupId>javax.xml.stream</groupId>+
+<artifactId>stax-api</artifactId>+
+<version>1.0</version>+
+</docletArtifact>+
+</docletArtifacts>+
+</configuration>+
+</plugin>+
+</plugins>+
+</build>+
+</profile>+
+<profile>+
+<id>xsltproc</id>+
+<activation>+
+<file>+
+<exists>../xsltproc_win32/xsltproc.exe</exists>+
+</file>+
+</activation>+
+<build>+
+<plugins>+
++
++
+<plugin>+
+<groupId>org.codehaus.mojo</groupId>+
+<artifactId>exec-maven-plugin</artifactId>+
+<version>1.1</version>+
+<executions>+
+<execution>+
+<id>copy-docs-to-builddir</id>+
+<goals>+
+<goal>exec</goal>+
+</goals>+
+<phase>compile</phase>+
+<configuration>+
+<executable>copy</executable>+
+<commandlineArgs>src\\main\\doc\\*.* target\\classes+
+</commandlineArgs>+
+</configuration>+
+</execution>+
+<execution>+
+<id>prepare-xsltproc</id>+
+<goals>+
+<goal>exec</goal>+
+</goals>+
+<phase>package</phase>+
+<configuration>+
+<executable>copy</executable>+
+<commandlineArgs>..\\audioid-rest-interface\\src\\main\\resources\\*.xsd+
target\\classes</commandlineArgs>
+</configuration>+
+</execution>+
+<execution>+
+<id>exec-xsltproc: target/application.html</id>+
+<goals>+
+<goal>exec</goal>+
+</goals>+
+<phase>package</phase>+
+<configuration>+
++
+<executable>../xsltproc_win32/xsltproc.exe</executable>+
+<commandlineArgs>-o target/application.html+
src/main/doc/wadl_documentation.xsl
target/classes/application.wadl</commandlineArgs>
+</configuration>+
+</execution>+
+</executions>+
+</plugin>+
+</plugins>+
+</build>+
+</profile>+
+</profiles>+
+<pluginRepositories>+
+<pluginRepository>+
+<id>maven2-repository.dev.java.net</id>+
+<name>Java.net Repository for Maven</name>+
+<url>http://download.java.net/maven/2/</url>+
+<layout>default</layout>+
+</pluginRepository>+
+<pluginRepository>+
+<id>maven-repository.dev.java.net</id>+
+<name>Java.net Maven 1 Repository (legacy)</name>+
+<url>http://download.java.net/maven/1</url>+
+<layout>legacy</layout>+
+</pluginRepository>+
+</pluginRepositories>+
+<repositories>+
+<repository>+
+<id>maven2-repository.dev.java.net</id>+
+<name>Java.net Repository for Maven</name>+
+<url>http://download.java.net/maven/2/</url>+
+<layout>default</layout>+
+</repository>+
+<repository>+
+<id>maven-repository.dev.java.net</id>+
+<name>Java.net Maven 1 Repository (legacy)</name>+
+<url>http://download.java.net/maven/1</url>+
+<layout>legacy</layout>+
+</repository>+
+<repository>+
+<id>glassfish-repository</id>+
+<name>Java.net Repository for Glassfish</name>+
+<url>http://download.java.net/maven/glassfish</url>+
+</repository>+
+</repositories>+
+</project>+
Can anyonr contribute?

Problem with Roles and Triggers

I'm having a strange problem with Roles and Triggers in Oracle. It's a little difficult to describe, so bear with me...
I'm trying to create a trigger that inserts records into a table belonging to a different user/owner. Of course, the owner of this trigger needs rights to insert records into this other table. I find that if I add these rights directly to the owner of the trigger, everything works okay and the trigger compiles successfully.
However, if I first create a Role and grant the "insert" rights to it, and then assign this role to the owner of the trigger, the trigger does not compile successfully.
To illustrate this, here's an example script. I'm using Oracle 10g Release 2...
-- Clean up...
DROP TABLE TestUser.TrigTable;
DROP TABLE TestUser2.TestTable;
DROP ROLE TestRole;
DROP TRIGGER TestUser.TestTrigger;
DROP USER TestUser CASCADE;
DROP USER TestUser2 CASCADE;
-- Create Users...
CREATE USER TestUser IDENTIFIED BY password DEFAULT TABLESPACE "USERS" TEMPORARY TABLESPACE "TEMP" QUOTA UNLIMITED ON "USERS";
CREATE USER TestUser2 IDENTIFIED BY password DEFAULT TABLESPACE "USERS" TEMPORARY TABLESPACE "TEMP" QUOTA UNLIMITED ON "USERS";
CREATE TABLE TestUser.TrigTable (TestColumn VARCHAR2(40));
CREATE TABLE TestUser2.TestTable (TestColumn VARCHAR2(40));
-- Grant Insert rights on TestTable to TestRole...
CREATE ROLE TestRole NOT IDENTIFIED;
GRANT INSERT ON TestUser2.TestTable TO TestRole;
-- Add TestRole to TestUser. TestUser should now have rights to INSERT on TestTable
GRANT TestRole TO TestUser;
ALTER USER TestUser DEFAULT ROLE ALL;
-- Now, create the trigger. This compiles unsuccessfully...
CREATE TRIGGER TestUser.TestTrigger AFTER INSERT ON TestUser.TrigTable
BEGIN
INSERT INTO TestUser2.TestTable (TestColumn) VALUES ('Test');
END;
When I do a "SHOW ERRORS;" after this, I get:
SQL> show errors;
Errors for TRIGGER TESTUSER.TESTTRIGGER:
LINE/COL ERROR
2/3 PL/SQL: SQL Statement ignored
2/25 PL/SQL: ORA-00942: table or view does not exist
SQL>
As I said above, if I just add the Insert rights directly to TestUser, the trigger compiles perfectly. Does anyone know why this is happening?
Thanks!
Adrian

Hi Raghu,
If the insert rights exist only on TestRole, and TestRole is assigned to TestUser, I can do the INSERT statement you suggest with no problems if I just execute it from SQLPlus (logged in as TestUser).
The question is, why does the same INSERT fail when it's inside the trigger?

Strange problem with desktop

Hi, I have a very strange problem with desktops and dashboards something else. For example, when I am on desktop 2 and i go to desktop 1, when I click with the mouse on it, it goes again to desktop 2. or when I am on desktop 1 and I go to ddashboard, it returns again to desktop 1 when i click to something in the dashboard.
but, if i am on desktop 3, and i go to desktop 1 throguh desktop 2, there is no problem. the same if i go from desktop 2 to dashboard.
I hope i've been clear enough to let you understand this... explanation =P
Anyone can help?

My system has started "freezing". Actually, usually when I'm browsing the net, Chromium stops loading pages. Conky stops updating, and usually I can't switch to another programs. I can't start xkill from menu, menu opens but nothing starts. If I run "ls" etc in Terminal, nothing happens
I can however control+alt+F1 to CLI, but if I try to login nothing happens.If doesn't help even if I kill X (I started it with startx). And if I don't kill X, I can't go back from CLI with control+alt+F7, there's just a black screen.
I'm using Nvidia drivers also, and XFCE4. This started happening some time ago, I think I was using Gnome2 back then. And I have updated my system, and this has happened at least with 3 kernel versions. There's nothing on logs. Well, actually, there's "TCP: Possible SYN flooding on port 6881. Sending cookies" errors on everything.log. But those don't happen when system freezes. And sometimes Chromium stops loading pages but other programs don't freeze, I think it's a problem with cache or something.
Not really sure if this everything happens because of Chromium. I think I'm gonna switch back to Firefox and see what happens. Usually I'm running Chromium, Opera (use it just for a couple of pages), couple of Terminals and Kaffeine.

Strange problem with Istant DB

Hello,
i have a strange problem with idb and classloader... if i try to connect to my db using a servlet, i get a ClassNotFoundException, but if i try to connect to it normally, it's all ok...
C:\jwsdp\webapps\ROOT\prova\DB>java DataBase
Enhydra InstantDB - Version 3.26
The Initial Developer of the Original Code is Lutris Technologies Inc.
Portions created by Lutris are Copyright (C) 1997-2001 Lutris Technologies, Inc.
All Rights Reserved.
Database movies is shutting down...
Database movies shutdown complete.
What's the problem??? why
Class.forName("org.enhydra.instantdb.jdbc.idbDriver");
in a servlet application catch a ClassNotFoundException???
this is my classpath:
%JAXP_HOME%\lib\jaxp-api.jar;
%JAXB_LIBS%\jaxb-api.jar;
%JAXB_LIBS%\jaxb-ri.jar;
%JAXB_LIBS%\jaxb-xjc.jar;
%JAXB_LIBS%\jaxb-libs.jar;
%JWSDP_HOME%\common\lib\catalina-ant.jar;
%JWSDP_HOME\common\lib\servlet.jar;
C:\idb\Classes;
C:\idb\Classes\idb.jar;
C:\idb\Classes\idbexmpl.jar;
C:\idb\Classes\jta-spec1_0_1.jar;
C:\j2sdk\lib;
C:\jwsdp\jaxb-1.0\lib;
C:\jwsdp\jaxb-1.0;
C:\jwsdp\jaxb-1.0\lib\jaxb-api.jar;
C:\jwsdp\jaxb-1.0\lib\jaxb-libs.jar;
C:\jwsdp\jaxb-1.0\lib\jaxb-ri.jar;
C:\jwsdp\jaxb-1.0\lib\jaxb-xjc.jar;
Thanks, Marco

There should be a xml configuration file for tomcat, and it should be possible to state additional classpaths there. But I'd suggest to use the pre-configured classpaths. In which directory does your servlet class reside, or where is your document root for the web application of this servlet?
Regards

Strange problem with color measure in Mac.

Hello, I am having a strange problem with color measure in Mac. For example i create a gradient in Photoshop from color 200 200 200 to color 240 240 240. When i measure the color of the gradient with the color measure tool of Photoshop or with the built in OS X color measure tool the measured color is from 200 199 197 to 240 240 238. I have measured the same gradient with Photoshop for PC and the values are OK (the same values that i create).
I dont know what is the problem, but i belive that the colors that i create would be the same that i measure after creating them, and also the same values between Mac and PC. I will appreciate it a lot any help or information that you could give me that helps me to understand what is happening here.
Thank you for your time
Marcelo.

Yep you got it, proof as monitor basicaly strips out any profiling and just delivers it straight.
is there any way to make the OS X color measure tool to measure the original color values
You mean the document colors - No, like I said photoshop is filtering your image through document profile, proof setup and monitor profile. Why do you want to use Digital color meter anyway for this?
i dont understand what is the point to measure color values that will change every time a calibrate my monitor.
Because color values are 'bigger' than whats on your monitor. Your monitor (via photoshop) is only doing the best it can to display those values - which can be anything from LAB colors outside the gamut of your monitor - to CMYK colors. Calibrating it is the only way to allow your monitor to do this in any way accurately. (not ever really possible) Monitors have a certain gamut and are only dispays/representations of the REAL colors that a document, with a profile, holds. So there's only one good reason to measure monitor values, and that's to generate a monitor profile.

Strange Problems With Curves and VC Color Vibrance

Similar Messages

Maybe you are looking for