Strange problems with nvidia video card

Hi, I don't know if it's really a problem, but I suppose...
I had in the last days serious problems with the nvidia card and ubuntu (see ubuntuforums or askubuntu).
Resuming I couldn't boot ubuntu if the nvidia card was enabled...
Now I only use windows because of this problem but I have another doubt: why the power manager sometimes don't show me the GPU usage (see image)?
In any case the nvidia (I think) is always working (the external monitor plugged in the DisplayPort works... I think that's a confirmation)
Another question: at times when I watch video on youtube the nvidia is enabled at others not... is this a problem of optimus or not?
For me it's important that windows works (no problem if ubuntu doesn't works.. I posted the links of the problems with ubuntu just for information on what's happened before this problem with windows..

I'm using Firefox with html 5...
But I also tried also with chrome, in which the html 5 mode in youtube is not activate, and I have the same problem...
I find it strange because if i have the monitor plugged in the nvidia GPU is activated (of course) and if i'm whatching a video on youtube when i disconnect the monitor the GPU won't switch to the intel but it still remains the nvidia activated until i close this video..

Similar Messages

Problem with nvidia video card GTX670 in PS CC

I have been using PE10, but have just installed Photoshop CC v. 13.1.2 x64. Although my video card (nvidia GTX 670, 2 gb RAM) is recognized by Photoshop, when I check "use graphics processor" under "preferences/performance" the converted RAW image is somewhat blurred at all zoom levels (except 100%) compared to when it is unchecked and sharp (for both Canon 1100D and 6D). The problem may possibly reside in the RAW conversion, because if I convert the file with "use graphics processor" unchecked, and then subsequently check it after it has been opened, the image is not blurry and I have access to all of the video card supported functions. Has anyone else experienced this problem, and found a solution? Thanks, artmar4 (intel i5-3670, 24 gb RAM, Windows 7, 64 bit).

artmar4 wrote:
I must admit it's not intuitve to me that the image would be somewhat blurred when clicking on "fit screen" and "fill screen" (but then what do I know.)
The GPU image-interpolation for display is more sophisticated than that of the CPU, but both methods cannot avoid compromising the image quality in some way in order to reduce the scale of an image. The GPU method can produce blurry results whereas the CPU method can produce ragged results.
Both methods produce very good results when the zoom is 100% divided by a power of two. However, "Fit Screen" and "Fill Screen" won't give a nice neat zoom level like that, except on very rare occasions when an image has a particular size relative to the screen.
Here's a (hideous) contrived example of the blurriness of GPU versus the raggedness of CPU. First is the image at 100% zoom. Then the doc on the left of each screenshot is being scaled by the GPU, the doc on the right by the CPU. Click the images to view without forum resampling!

Genius needs to help! problems with my video card and system

Hey guys! I'm going to post my specs first so that you get a good idea of what I'm running on:
MSI Neo2 LS 865PE.....MAT=Slow
Pentium4 2.4C.....FSB=233=2.8C hyperthreading enabled ~>1.55V
Corsair TwinX 1gig PC3700.....memory on "AUTO" in BIOS with timings at 3,4,4,8 ~> 2.7V
Radeon 9700NP.....stock speeds ~>1.7V
AlienX case with 2 fan400 watt power supply and 6 case fans
Zalman Alum/Copper heatsink fan
1:I've had this motherboard for a few months now. I upgraded my video card from a nVidia Ti4200(128meg) to a Radeon 9800 a month ago, but I couldn't get it working at 8X AGP, no matter what voltages I threw at it. I returned it for a Radeon 9700NP hoping that it would work, but it still won't.
I'm using BIOS 1.9 and since there is no option to select your AGP speed, I could only try using ATI's drivers. Once booted into Windows, there is a slider you can move to select you AGP speed. On my machine It says that It has performed some tests and has concluded that AGP 4x is the best for my system....but my system supports AGP 8X!
I've moved the slider over to 8x (which requires a reboot) at least 5 times with each card but the slider refuses to move past 4xAGP after the reboot.
2: My second problem: I had an old stick of KingMax PC3200 and decided to buy 3 more sticks. Unfortunatly, the 3 I bought did not match the one I had, so I only put 2 of the new sticks I bought into my system. Immediatly, My system would crash, lock up, files were corrupt, and I got PLENTY of blue screens of death with a long message containing: 0x0000007 with all these other numbers and "0"s. I did a search online and found out I had a hardware incompatibility problem. I never got this with my old stick of ram.
I returned the 3 sticks of Ram and replaced them with the Corsair. Put my new Radeon 9700 in, formatted my hard drive....and within 24 hours, my system locked up 3 times, rebooted itself 5 times, and gave me the same BSOD as mentioned above with the same long message.
I didn't change anything except for the memory and the video card. I've been wanting to overclock, (thats why i bought the faster memory ) but I'm not sure what to do at this point.
I have my FSB at 233 but I'm scared to go any higher because of previous system instability at stock speeds. My RAM was running on 400 and MAT=Turbo with the most relaxed timings at 3,4,4,8.
I've given myself hours of sleepless nights formatting when my system wouldnt boot into windows; overclocking....etc. I NEED HELP. PLEASE. PLEASE. Anything could work at this point.
I'm trying to get more info on how to run my system at a 5:4 ratio, also.
If anyone has problems like me or knows what could be the problem with my system, please reply to this post, it would help me a lot. I've been trying to fix these problems for a few months now so anything is greatly appreciated.

Thanks a lot to you guys that responded. I brought my computer home this past holiday and I want to let you know where I stand as of now. I guess this thread is like my blog for my computer. I want to clear some things before my first post makes everyone confused.
1- I have only 2 sticks of memory in my system: the Corsair PC3700 TwinX 512x2
I returned the 3 KingMax I bought, and still keep my old stick just in case.
2- I am using the 400 watt power supply that came with the case. I read some reviews of the case and I know the reviewer did not have problems with the power supply. In my BIOS, there are some voltages it is weak on. Lets say: it it should be 5.00+, my power supply will be feeding it 4.96v or something like that, but I dont know, or think, that is a major problem...
3- My computer will refuse to boot if memory speeds are set at anything below 400. SO....if I want to use a 5:4 ratio and have to set my memory speeds to "333" in BIOS, my system refuses to boot.
4- This morning, I did manage to overclock my FSB to 250. Specs are as follow:
Memory Timing @3,4,4,8,4.....speed set at "AUTO".....MAT at "SLOW"
MY 2.4C's FSB was raised to 250 = 3.0gig
AGP/PCI frequency: 67.xx/3x.xx (cant go any lower)
CPU voltage: 1.5500
Memory voltage: 2.75
Video Card voltage: 1.7
Everything was fine for the whole day until I heard something click in my computer around midnight, and then seconds later, my computer froze and made a continuous beeeeeeeeeeeeeeeeeep. (you can imagine)
This "click" and system crash has been plaguing me for months now. I dont know whay it happens. I was just using AIM when I heard the click and my heart stopped.
My memory speeds have been set to "AUTO" even at the FSB of 250. But I don't know if this still means my system is at a 1:1 ratio. I know the BIOS then adjusts the memory to work at 500 if my FSB is 250...so I assume it is? I love 3gig, but somehow I feel that 2.8 is faster, since the FSB=233 running parallel to my memory, also at 233
A FSB of 250 is good enough for me, that's what I've been waiting 6 months for. If anyone knows how to set other ratios to achieve a FSB of 250+, please let me know, but as I said, my memory won't boot if its set at "333"

Problem with nvidia graphic card, nvlddmkm.sys

I have a HP m9000 , originally it had Vista, it started to fail and display the error nvlddmkm.sys (on a blue screen od death), i intalled Windows 8 in hope the problem get resolve. but the problem still persist. At the beginning on W8 it looks like working fine, but suddenly it started to display "controller not responding", and then it is displayin "Something goes wrong with your graphic card".
I found on internet a fix; expanding the nvlddmkm.sy_ and replace the file in system32. i made it but right now after the windows logon screen the monitor starts to blink between black screen and off screen.
The grapghic card is a NVIDIA 8500 GT. I tested the graphic card in other computer, and at the begining it worked fine, but after the dirver installation it started to fail in the same way.
Ad far i could read on intetrnet it is a failure with NVIDIA.
Is there any solution for this problem? Or i should change the graphic video card? (Maybe for an ATI)

Hi,
I have used many different NVIDIA cards (including a 8600) on different PCs and never had your issue.
As for drivers, you can always use the original drivers that came with your PC and then do an update if necessary.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Display problems with NVIDIA K5000 card for Mac

I have recently switched cards in my Mac to the heavier NVIDIA K5000 card. While great for After Effects and Premiere, I get wild artifacting in Indesign CC 2014.
Is this a know issue and how can I (hopefully) solve this?
Albert

I've branched this issue to a new discussion as it was unrelated to the problem the other folks were seeing.
We continue to widen the number of video cards that we support GPU acceleration on. It sounds like this is what you're running into.
Since it's unrelated to Protected Mode, definitely go back and make sure that you've removed the line from your mms.cfg that you may have added while troubleshooting that problem. Disabling Protected Mode in general is a bad idea, and will leave you vulnerable to many modern classes of attacks over the long term.
If you haven't updated to the latest available drivers for your graphics hardware, please do that. It may eliminate the issue you're experiencing.
If that doesn't work, please check out our graphics troubleshooting guide:
http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
If you're still stuck after this, please file a bug here: http://bugbase.adobe.com/
Please reply to the thread with the Bug ID, so that I can follow up on it.
Also, include the output of dxdiag.
To do that, click Start > Run
Type the following, then press [Enter]:
dxdiag
Click Save All Information

A strange problem with my wireless card

my box is lenovo ideapad y550, the wireless card is intel 5100. After i update to kernel 2.6.32, there is a strange problem occored.
i configure my wireless at /etc/rc.conf like this:
MODULES=(...... iwlagn ......)
wlan_wlan0="wlan0 essid xxxx key s:xxxxxxxxxxxxx
wlan0="dhcp"
INTERFACES=(wlan0)
DAEMONS=(......network......)
it works well at 2.6.31
but at 2.6.32, i find during the archlinux start, it tell me that "dhcpcd time out"
so i remove network from DAEMONS and just load the wireless card's driver module, then i configure my wireless at the bash.
meanwhile, i find another strange appearance
when i use:
ifconfig wlan0 up
iwconfig wlan0 essid xxxx key s:xxxxxxxxxxxxx
dhcpcd wlan0
it tell me "dhcpcd time out"
and then dhcpcd wlan0 again ,it works.
while i use:
iwconfig wlan0 essid xxxx key s:xxxxxxxxxxxxx
ifconfig wlan0 up
dhcpcd wlan0
it works well.
i just put iwconfig before ifconfig, it works~ 囧!
now i have to remove network from DAEMONS at /etc/rc.conf and put the commands in the /etc/rc.local
anyone have ideas?why?
thanx very much and sorry for my english. english is not my mother language. :-)

Notes on trying out netcfg:
- install netcfg: pacman -S netcfg
- set up a profile file in /etc/networks.d (copy a file from /etc/networks.d/examples and edit it)
- add the name of the profile file to NETWORKS=() in /etc/rc.conf
- add '@net-profiles' to DAEMONS=() in /etc/rc.conf (put it after 'network', prefixed with '@' so you don't have to wait for the network just to log in)
- remove the name of your interface that you want netcfg to set up from INTERFACES=() in /etc/rc.conf (so it doesn't try to set it up twice)
- also turn off whatever other network configuration daemon, like wicd, you might have been using.
Last edited by sdolim (2010-02-06 21:52:25)

Think i have a problem with my Video card help ???

Hi Guys
Ok reason why i think this i currently have a black screen
I can still use the mac via screen share from my G5 so i know all is ok & i am currently making sure i'm backing up
I have tried to connect it to an external monitor but the mac doesn't register that there is one there
One other strange problem i can type ok but i cannot use my trackpad while i am in screen sharing mode
Any help would be great
Thank You

Well it's either your graphics card or the inverter for the screen I'd guess - either way the only people who can fix this for you are Apple.
The fact that it doesn't see an external monitor would suggest it's the card ...
I know this might sound like a dumb question but you have turned the brightness up fully and tried a PRAM reset haven't you ?
Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys.

Problem with m video card ?

Hello there
I have a 3dfx card named creative banshee with a memory of 16 mb i want to configure it on my soloris 7 for intel this device is not displayed in the HCL list
What should I do ??
thanks
Faisal

The easiest solution would be to get a different video card. I bought a Diamond Fire GL 1000 8MB AGP card for less than $50, and it works very well. I found mine by using PriceWatch - http://www.pricewatch.com
There may be third party products that would allow you to use the Banshee card under Solaris, but it would be easier, and probably cheaper just to get a different card.

Problems with my video card maybe AMD 6750M

I am having a problem I dont know how to solve it.
My video card is having problems everytime I switch it to AMD Radeon my computer freeze. or glitch. This happend to me last week.
Chipset Model:          AMD Radeon HD 6750M
Type:          GPU
Bus:          PCIe
PCIe Lane Width:          x8
VRAM (Total):          1024 MB
Vendor:          ATI (0x1002)
Device ID:          0x6741
Revision ID:          0x0000
ROM Revision:          113-C0170L-573
gMux Version:          1.9.24
EFI Driver Version:          01.00.573
I have an MacBook Pro 17" Early 2011
I cant design in photoshop or edit a video, I can only Use the Built In GC.
Can I disable the other one? or fix it?
Thanks

I think it's a driver issue. See this: http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W701-crash-problems/td-p/265780

Problem with Graphic/Video Card?

My 2011 15" MBP shows me the blue screen of death when it starts up (after the gray screen) and it literally just hangs there and I have to switch off my MBP by holding the power button.
I brought it to a Apple Service Centre and they told me all I had to do was reformat my MBP to get it up and running again (they could do it for me for $150... what a rip off). So after I reformatted it at home, I was hoping there wouldn't be any blue screen of death this time. But alas, no. It happened again.
I've read a couple of threads on here and I have a feeling it has something to do with a damaged video card. Also, I realised I can't watch videos on Youtube now.
Has anyone experienced something similar? I guess I have to go all the way down to the Apple Service Centre AGAIN...

Yeah if you reformatted the disk then re-installed os x fresh that most likely rules out any software issues . At least you didn't pay them 150$ just for them to tell you it needs more service though.

Satellite A300 and Win7 - Strange problem with speakers\sound card

Hello everyone,
I am working on a - A300-1MO with win 7 ultimate 32 bit
In the last few days (since I have installed the Bluetooth driver but I dont think it matters), the sound card, and therefore the laptop speakers, switch from being mute to being active, sometimes in high volume.
It disturbs me a lot because my computer is making sounds while I am in classes (from apps running\web sites etc.). I almost got kicked out of class several times because of it.
I tried muting the sound card from the windows mixer and from the sound card application, it's no use.
I will appreciate any help.
Thanks a bunch
Roi.

Hi roibs,
> It disturbs me a lot because my computer is making sounds while I am in classes (from apps running\web sites etc.). I almost got kicked out of class several times because of it.
Maybe you should leave your computer at home and not play with it in your class ;)
Anyway, I would recommend disabling all Windows sounds in control panel. That means no sounds will be played while you navigate through the Internet or use the Explorer.
Check this!!!

Strange problem with 2 different Soundblaster car

I have a very strange problem with these 2 cards First i had soundblaster li've value which was installed with the default windows drivers. Although it'swas installed correctly in device manager, i hear no sound and when i go to control panel->sounds and audio devices, under the volume tab there?was no audio device and everything?was greyed. But when i restart or shutdown the pc the windows sound suitable for this action played without problems. Media player couldn't play any sound, neither youtube. I downloaded and installed the Li'veDrvUni-Pack(ENG). Everything worked ok but after a while i had the same problem. So i decided to buy a different sound card, the Li've Audigy SE. Installed, worked fine, but after a short period of time i have the same problem. Most of the times when i boot into Windows the sound is ok, after a while (5 minutes or hour) i hear no sound and in the control panel i see the no audio device message although in control panel the card appears to be installed correctly. Any ideas?

Yes, I agree.
But my question: is there any software trick that I could use to fix the situation.
For example, how can I ask 2 keyboards about each one's NumLock state ?
I know about getLockingKeyState() function, but it always returns the NumState of the regular keyboard. How can I know and/or change the NumLock state of the small one ?
Thanks

Problems with Nvidia GeForce 210 and windows 8.1

Hi all, I have Windows 8.1 Pro update 1 64bit installed, two weeks ago I started giving problems graphics card NVidia (even has me
given several blue screen).
I tried to update the drivers for the card but I got the same problem. It was working properly with generic
drivers, and if I went to Computer Administrator me a yellow triangle appeared
on my graphics card and the properties told me the following:
Windows has stopped this device because it has reported problems.
(Code 43 )
My machine is as follows:
Mainboard : Asus P5K SE
Chipset: Intel P31/P35
Processor : Intel Core 2 Quad Q6600 @ 2400MHz
Physical Memory : 3072MB (3 x 1024 DDR2- SDRAM)
Video Card : NVIDIA GeForce 8500 GT
Hard Disk : Seagate ST3320620AS ATA Device (320GB )
Monitor Type: LG Electronics L1919S
I just formatted
the computer from scratch, and
I still had the same problem with the graphics card,
so I imagined it would be a hardware problem
and bought NVIDIA GeForce 210.
In the end I
upgraded to Windows 8.1 update 1 with
the latest drivers for the GeForce 210,
and after 6 days running everything correctly, a few days ago
returned to give me problems,
the screen sometimes freezes and will not
let me do anything and after a while
giving me a blue screen and reboots
me, I suspect that the graphics drivers
are giving me problems, and I had to
disable the graphics card and work with
generic drivers from Microsoft, and even then I
was restarted once.
I installed Driver Booster and all the drivers are updated.
Could
anyone analyze
dump files dmp ? Download here
I got another dmp:
C:\Windows\MEMORY.DMP but it is too heavy.
Thanks

yes, I check the dump files
this cause by graphic card, on which graphic card you reformat your PC and update
.NET framework maybe cause this driver corrupted
my suggestion is try using internal graphic card, just for testing
Just in case you don't believe me, please check this dump file
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 116, {ffffe000d84c4010, fffff800b540be2c, ffffffffc000009a, 4}
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+9bbe2c )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis *
VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: ffffe000d84c4010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff800b540be2c, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000004, Optional internal context dependent data.
Debugging Details:
FAULTING_IP:
nvlddmkm+9bbe2c
fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
CUSTOMER_CRASH_COUNT: 1
BUGCHECK_STR: 0x116
PROCESS_NAME: System
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
STACK_TEXT:
ffffd000`8adadbb8 fffff800`b457bfac : 00000000`00000116 ffffe000`d84c4010 fffff800`b540be2c ffffffff`c000009a : nt!KeBugCheckEx
ffffd000`8adadbc0 fffff800`b457008d : fffff800`b540be2c ffffe000`d760b7f0 ffffe000`d84c4010 00000000`00000001 : dxgkrnl!TdrBugcheckOnTimeout+0xec
ffffd000`8adadc00 fffff800`b4570582 : ffffe000`d760f540 ffffd000`8adadc60 00000000`00000002 00000000`00000001 : dxgkrnl!ADAPTER_RENDER::Reset+0x1f5
ffffd000`8adadc30 fffff800`b457b919 : ffffd000`8ada01b0 00000000`00000000 ffffe000`d5ff91a0 ffffe000`d742b000 : dxgkrnl!DXGADAPTER::Reset+0x416
ffffd000`8adadca0 fffff800`b446cfde : fffff800`b4453c90 ffffe000`d742b000 fffff802`84c1c000 00000000`00000000 : dxgkrnl!TdrResetFromTimeout+0x15
ffffd000`8adadcd0 fffff800`b4453d1d : ffffe000`d742b000 00000000`00000080 ffffe000`d50b4500 ffffe000`00000000 : dxgmms1!VidSchiRecoverFromTDR+0x1a
ffffd000`8adadd00 fffff802`84ceb794 : fffff802`84f69a00 ffffe000`d50b4500 ffffd000`8adaddd0 fffff802`84d7337d : dxgmms1!VidSchiWorkerThread+0x8d
ffffd000`8adadd40 fffff802`84d765c6 : fffff802`84f02180 ffffe000`d50b4500 fffff802`84f69a00 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`8adadda0 00000000`00000000 : ffffd000`8adae000 ffffd000`8ada8000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: .bugcheck ; kb
FOLLOWUP_IP:
nvlddmkm+9bbe2c
fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
SYMBOL_NAME: nvlddmkm+9bbe2c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nvlddmkm
IMAGE_NAME: nvlddmkm.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 5315b408
FAILURE_BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x116_image_nvlddmkm.sys
FAILURE_ID_HASH: {c89bfe8c-ed39-f658-ef27-f2898997fdbd}
Followup: MachineOwner
1: kd> lmvm nvlddmkm
start end module name
fffff800`b4a50000 fffff800`b56a8000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue Mar 04 19:07:52 2014 (5315B408)
CheckSum: 00C20523
ImageSize: 00C58000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

Nvidia video card update

recently my pc crashed lost everything and started over. everything has updated but the Nvidia video card. when it is up dated system says a updated has caused an issue and has to go back to the last restore point. i have never had this problem before. if there is anyone that knows what is going on with this update please help me out. Thank you
Computer-hewlett Packard p7-1209
monitor- Proscan lcd hd tv

Please explain what the actual steps included in "started over" and "everything has updated". Was the Recovery DVD set or the Recovery partition used? Doing "starting over" in that manner should get you up and running again. Be cautious with updating from sites other than HP.
There seems to be a precious balance with the I3, i5, and i7 processors and the software/hardware that is easily pushed out of balance by introducing outsiders, such as hardware changes or non-approved software updates.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Strange problems with nvidia video card

Similar Messages

Maybe you are looking for