Strange problems with pc suite with nokia 6680

i'd had installed pc suite v6.7 on windows xp sp2 with all new adds from microsoft update(from a total succesuful uninstall with post addition of running nokia suite cleaner 3.1).
installation was perfect OK. I am using DKU2 cable
the suite recognize and install the correct drivers and the status was that "nokia 6680 was connected via USB"
all it seems ok and also nokia pc suite sais that the phone is connected but if you try to launch any application or to browse the phone with phone browser it goes to error (impossible to complete operation")
in my opinion there is something left or bad installed on the phone on previous attempt (probably the PC suite support application) because i was no asked of any confirm on the phone in the connection phase. In the c:/system dir on the phone infact there is a suiteconf.xml file related i think to that app.
IF it is the problem cause Please indicate how to clean the phone or how to install (even manually the correct app). ù
thanks

Do you mean that you cannot open any applicaiton in PC Suite ? (Backup, Sync, Application installer, Connect to Internet and all those ?) None of them won't even open up ? If that is the case, the installation has not succeeded and it does not relate to the SIS package that was installed during previous installations of PC Suite. Please indicate can you get any of the Nokia PC Suite applications to work (excluding the applications that are built in to Windows Explorer) then it is easier to try to figure out what is wrong.

Similar Messages

Strange behaviour of PC Suite with 6500c after sof...

Hi everyone,
I have a 6500c connected via USB to my PC running PC suite. For ages I've been able to send and receive messages via the PC Suite quite happily and view contacts etc. But that has stopped since I updated my firmware and the PC Suite software.
Now when I plug the phone into the USB cable, it no longer sychronises with PC Suite (I choose PC Suite from the phone). PC Suite recognises the phone, charges the battery and I can still browse the phone's memory. I can still send messages, but if I click the refresh button in the Nokia Communication Centre, it will not refresh my messages so I can't read them or reply to any. The drop down in the number field also doesn't show numbers/names from the phone.
If I go to the Contacts app of PC Suite, it reports "Refreshing of contacts failed"
When I go to "Settings > Settings..." and click "Check the notifications supported by this device: Nokia 6500c" it runs the test and says the phone supports the following:
Notifications for incoming calls : Yes
Notifications for incoming messages : No
Battery level notification : Yes
I've reinstalled the firmware and PC Suite but it's still no better. I can't do a Restore All factory default on the phone as I don't know the code it asks for!
The 6500c firmware is v09.45 (the latest according to the software updater)
The PC Suite version is 7.1.18.0
Can anyone help me?
Any help gratefully aprreciated!!
Steve

Hi,
I'm facing this same problem from december 2009. Phone notifications does not work. Battery level bar doesn't work too (only in BT mode).
These are known isues of 7.1.18.0 still not removed.
If you want have your old functionalities, install older version 7.0.9
Code for factory default should be 12345, if not changed.
Cheers
N95 & N96 User

Strange problem of Pdf downloading with Web Dynpro

Hi, experts, I have to setup a project to realize pdf downloading with web dynpro. But unluckily, I have tried all the methods in this froum ,there's really strange problem .Because when I click the link of Download UI link, there's no reaction at all, I really don't know why.Below is the codes I used , can anyone help me ? thank you very much!
public void wdDoInit()
    //@@begin wdDoInit()
          IWDAttributeInfo attInfo =
               wdContext
                    .currentContextElement()
                    .node()
                    .getNodeInfo()
                    .getAttribute(
                    "Pdfsource");
          ISimpleTypeModifiable type = attInfo.getModifiableSimpleType();
          IWDModifiableBinaryType binaryType = (IWDModifiableBinaryType) type;
          binaryType.setFileName("test.pdf");
          binaryType.setMimeType(WDWebResourceType.PDF);
          try {
               int length =
                    (int) wdContext.currentPdfdownloadElement().getBin_Filesize();
               byte b[] = new byte[length];
               b = wdContext.currentPdfdownloadElement().getBin_File();
               wdContext.currentContextElement().setPdfsource(b);
          } catch (Exception ex) {
"Pdfsource" is the context value attribute of type binary.And Bin_File is the xstring type parameter from my RFC contains pdf content.
I used two views and one customer-controller . I put some value in the first view to set search condition.and the second then appears and have the download UI element. Are there any additional codes I should use? pls help!

Hi Hao,
Try this out
Suppose the file name is test.doc in c drive in server
create a context attribute filedata of binary type
bind it to data property
write the following code
try
   File input = new File("C:
test.doc");
   int length =(int)input.length();
   //Create a byte array b to hold the file
   byte b[] = new byte[length];
   FileInputStream in = new FileInputStream(input);
   //Reading the file to a byte array b
   in.read(b);
   in.close();
   //Setting the data from the byte array to the context element.
   wdContext.currentContextElement().setfiledata(b);
catch(Exception ex)
wdComponentAPI.getMessageManager().reportSuccess("Error in File
IO"+ex.toString());
// Structure information of the context attribute
IWDAttributeInfo attinfo = wdContext.getNodeInfo().getAttribute("filedata");
IWDModifiableBinaryType binaryType = (IWDModifiableBinaryType) attinfo.getModifiableSimpleType();
// Default File name which appears when opened on client machine
binaryType.setFileName("testing.doc");
//Explicitly setting the file type
binaryType.setMimeType(WDWebResourceType.DOC);

Strange problem when syncing events with Google Ca...

I'm trying to sync all my calendar events with Google Calendar. Everything works perfectly if I add or update events with my N9. All the changes and new events are synced to Google Calendar so that they are visible in web browser.
But if I make changes or create new events with my computer (with web browser) those events are not visible in N9!!! When I tap "Syncronize" N9 show's how many events were added or updated, but they are not visible in the calendar.
Everything worked before, but now the last visible event in the calendar (made with computer) is on October 25.
I've tried set this account up with Mail for Exchange and CalDAV. Same problem with both of them...
Any ideas why one account works, but another does not with same kind of settings!?
EDIT:
I just found this:
http://forums.internettablettalk.com/showthread.php?s=c06b3c1ac31df96bb331589237572569&p=1245121#pos...
So, it's probably a bug in PR1.3 :-(
Solved!
Go to Solution.

Solution found!
http://talk.maemo.org/showthread.php?p=1244209

Connectivity problem with ovi suite with nokia x2-...

hi,
i have bought a new nokia x2-01 and i have already nokia e63,
i m trying to connecting my new nokia x2-01 using my e63's usb cable but pc shows that usb not recognise i have tried more then 10 times but it is not connecting can u just help me out for that pls
i cant connect my phone with my pc pls solve it ASAP
thanks,
munawarkhan

You need a Nokia microUSB Cable CA-101 for the X2-01.
http://www.developer.nokia.com/Devices/Device_specifications/X2-01/
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

NIO: Strange problem when using ByteBuffer with non-blocking SocketChannel

Hi,
I have a server that uses multiplexed, non-blocking I/O with java.nio. When a client connects, the server waits for the message: <system cmd="knock"/>, returns a message and disconnects the client. The clients are shortly serviced in less than a second.
But the server newer receive anything from about 20% of the clients - even though it is sent. Or with other words: it is received and the data is contained in the ByteBuffer - SocketChannel.read(ByteBuffer) - but a call to ByteBuffer.remaing() returns 0 !!
ByteBuffer receiveBuf = ByteBuffer.allocate(65536);
receiveBuf.clear(); // the code is elsewhere used for longer living clients
int readBytes = channel.read(receiveBuf);
receiveBuf.flip();
StringBuffer sb = new StringBuffer();
System.out.println(" * Remaining: "+receiveBuf.remaining()); // writes: ' * Remaining: 0'
System.out.println(" * Received: "+new String(receiveBuf.array())); // writes: ' * Received: <system cmd="knock"/>'
while(receiveBuf.remaining() >= 2) {
byte b = receiveBuf.get();
sb.append((char)b);
System.out.println(" * sb content: "+sb.toString()); // writes: ' * sb content: 'The ByteBuffer clearly receives the correct data, but the ByteBuffer.remaining() returns 0 and therefore the StringBuffer will never have any content.
The problem seems to occur randomly and for about 20% of the clients (simulated from the same computer and therefore has the same bandwidth and so on).
Anyone knows what is going on, and how to solve the problem !?

It's always possible in any read that the number of bytes read is less than the number of bytes requested. You need to keep reading until you have got everything you expected, and cope with every possible error condition on each iteration.
EJP

Strange problems on using selectmany_checkboxlist with selectitems

Hello all.
I try to get selectmany_checkboxlist (JSF 1.0 Beta) working with selectitems but it seems
that there are several conversions problems. My JSP page is defined as follows:
<h:form id="registrationForm">
<h:selectmany_checkboxlist id="credentials" value="#{UserAccount.credentials}" required="true">
     <f:selectitems value="#{UserAccount.credentialItems}"/>
</h:selectmany_checkboxlist>
<h:messages styleClass="message-validation" for="credentials"/>
<h:command_button id="submit" action="success" value="Submit">
<h:form id="registrationForm">Minimum one checkbox has to be selected. The messages tag shows
- if nothing is selected : Validation-Error: No Values (This is OK)
- if one is selected : Conversion Error : Value 'null' for Modell 'expression'.
- after submit : Conversion-Error: Value'[Ljava.lang.String;@ed3e63' forModell 'expression'
My Managed-Bean is as follows:
[code]
public class UserAccountBean {
private ArrayList m_CredentialList = null;
public void setCredentialItems(Collection items) {
System.out.println("setCredentialItems " + items);
// Not needed
public Collection getCredentialItems() {
String[] options = {"ERPLOGIN", "CRLUPLOAD", "ADMIN"};
ArrayList items = new ArrayList(options.length);
for (int i = 0; i < options.length; i++) {
items.add(new SelectItem(options, options[i], options[i]));
System.out.println("getCredentialItems " + items);
return items;
public void setCredentials(Object[] credentials) {
if ((credentials != null) && (credentials.length > 0)) {
int len = credentials.length;
m_CredentialList.clear();
m_CredentialList = new ArrayList(len);
for (int i = 0; i < len; i++) {
m_CredentialList.add(credentials[i]);
System.out.println("setCredentials " + m_CredentialList);
} else {
System.out.println("setCredentials " + null);
public Object[] getCredentials() {
System.out.println("getCredentials " + m_CredentialList);
try {
return m_CredentialList.toArray();
} catch (NullPointerException e) {return null; }
My faces-config.xml:
<managed-bean>
<description>Data model containing data of a user account</description>
    <managed-bean-name>UserAccount</managed-bean-name>
    <managed-bean-class>model.UserAccountBean</managed-bean-class>
    <managed-bean-scope>session</managed-bean-scope>
</managed-bean>What is wrong about this? Any idees?
Heinz

I believe the problem is a bug in the beta RI that chokes on "Object[]" as the type of the selectmany's value, and that "String[]" will work. I also believe this has been fixed since the beta.
-- Adam Winer

Can't sync N8 with OVI Suite after Anna update

Have a strange problem. OVI Suite sees my N8 and I can update programs and OS on it.
But when I try to sync contact or messages it either closes or gives an error.
Also it can't connect to maps server (but that is and old problem, long time since worked).
Hav tried complete uninstall (and cleaning files and registry).
And have tried both USB and BT (both sees phone all right).
Can also browse phone memory in Explorer.
See enclosed images for errors. Any ideas?
Lars-Erik Østerud - http://www.osterud.name/nokia.html
Attachments:
Image1.png ‏3 KB
Image2.png ‏4 KB
Image3.png ‏4 KB

Hi LarsErik/Piv1978,
Thanks for reporting the issue.
Could you please fill in the detailed error reporting form which is available in the following link.
http://tiny.cc/ja40z
This will help us understand your issue better. Please don't forget to attach logs/crashdump and relevant screen-shots.
BR,

Nokia 6680 - switch message from off?

Hi,
I would like to send anonymous text messages with my 3G contract nokia 6680. Is this possible?
Please advise.
Thanks in advance.
Nagsy

don't think its possible to send texts without your number coming up!!

Strange Problem - Cluster of References

Hello guys
I had a strange problems using a cluster with references.
How to reproduce the problem:
- open a blank VI;
- create two graphs in the front panel;
- in the block diagram, create references for both graphs;
- connect these references to a bundle (not bundle by name);
- create an indicator for the bundle;
- run the VI once;
- right click on the bundle indicator and change it to a control;
- delete references and bundle;
- select the control in the front panel, go to EDIT, CUSTOMIZE CONTROL;
- change to strict type def;
- save this control as Control1.ctl;
- connect the control to a unbundle by name;
- right click on the unbundle by name and select one of the two graphs as an item (doesn't matter which one you select);
- create a property node and feed its reference terminal with the reference from the unbundle by name;
- use the property "Label.Text" in the property node;
- create an indicator for the the property node;
- run the VI;
- the indicator will show the correct label for that graph;
- perfect!!!
If you save the VI and run it again, everything is fine.
But............... if you close it, open again and run.... you will get an error 1055 "Object reference is invalid".
Why it was working before closing?
Find attached the VI and the Control.
Thanks
Dan07
Solved!
Go to Solution.
Attachments:
Cluster References.vi ‏11 KB
Control1.ctl ‏7 KB

Let see if I can answer before I have to start working.
Do a quick experiment.
Use a Type cast to cast your ref as a U32 and show that value on the FP.
Save the VI run it and record the number on the FP.
Mod the vi save it clsoe it open it and run again. The number should have changed.
That is the issue you facing, the ref number changes so you need one that is valid when you run.
How I do it;
I use an Action Engine (see this Nugget to learn what an Action Engine is) that servse as a GUI controller and lets me get at refs where even I need them. The following is a case study.
First I collect all of th refs I will need and bundle them in a type def. I sue a state machine to do the bundling if there are a lot.
THe bundled clsuter get passed to an GUI Controller Action Engine
Inside the Init I check the refs to make sure they are vlid. THis has saved a lot of wated time chasing invalid refs.
If they were valid I cache the refs.
For major mode changes that demand a lot of GUI punching I create sub-VI to do the dirty work.
When ever other codes needs a ref to the GUI I have a method that returns the refs.
THe following shows another VI using those GUI refs.
I hope that helps,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Problem in using OVI Nokia Suite with c2-03

Dear Moderators.
i use OVI Nokia Pc Suite with my Nokia C2-03, it worked properly. but now a days it is not working properly. sending msgs via pc suites very very late. new sms received is not showing in pc suite but it was showing before some days.
i realize every action done via pc suite is happening very very late. please tell me what should i do?
Regards,
Rameez

user10237942 wrote:
Could anyone tell me what has been the exact problem and its solution.The exact problem:
Forms Developer looking at tnsnames.ora file in Developer Suite home, not in Database home folder. On another side TOAD looking at tnsnames.ora file in Database home folder.
Solution:
As Hub already posted, you need to copy tnsnames.ora from database E:\product\oracle\10.0.2\db_1 dir\network\admin into in E:\Datasuite_home1 dir\network\admin
Cheers!

Problems with SMS backup from Nokia PC suite

Dear forumERS,
sorry to bother you with a question asked many many times i guess...but apparently no solutions yet (at least: as far as i red until now).
I switched form Nokia Xpress Music 5800 to Nokia E71 and the backup with PC suite worked quite ok for contacts, settings and calendar. SMS were imported as well, but the phone shows phone numbers instead of names as senders in the inbox folder (= i see the phone number but not the name). However, in the outbox folder, the same phone number is correctly recognized and linked to the contact (= i see the name of the recipient). But if i read the content of the inbox folder from PC Suite, i see the names correctly. In addition, the phone doesn't import the content of the archive folder. What's wrong with my cell phone and/or backup and/or PC Suite? Can anybody help?
Thank you in advance for your attention!

hello forum..i too am facing a similar problem of not being able to restore my contacts n sms back into my cell using nokia content copier in pc suite..im using a nokia 7610 which i formatted before doin the restoration...andd also d pc suite was not the latest version which i used to restore my data..but inspite of it i tried restoring d data using the old version and i got a confirmation message saying " restoration successfully completed" on the screen..but when i checked my inbox and contacts i couldnt find anything and it was all blank........
so should i install d latest version of PC suite and try again....i wud be grateful to all who can help me regarding this problem...thanks

Nokia 6500 (slide) and problems with Pc Suite

Survey first:
What version of Windows is being used?
Windows Vista
What Service Pack is installed?
Service Pack 1
What version of PC Suite is installed?
7.0.8.2
What is the connection method, cable, bluetooth or IR?
I have both cable and bluetooth. Tried both.
I have a problem connecting my phone to Nokia PC Suite. I know I get the connection because I was able to use update manager to install new updates to my phone. I also tried to reinstall PC Suite and it didn't help.
Here is what happens, I will explain with screenshots. I just connected my phone via bluetooth or cable (doesn't matter - I get same results)
http://img363.imageshack.us/img363/6322/84873498tp3.jpg
PC Suite shows me that my N6500 is connected:
http://img146.imageshack.us/img146/4341/39312796ad5.jpg
Yet, if I click "Contacts" I get a contacts application with no contacts, while it shows that my nokia is connected. On my phone I have contact on the sim card as well as the phone. I copied them from sim and the in the view option check to hide the sim contacts. I got to at least show the ones that are on the phne, but it shows nothing:
http://img146.imageshack.us/img146/1541/95660645in9.jpg
Other stuff doesn't work too, like here is what happens when I try to Back-up:
http://img170.imageshack.us/img170/4949/71941457xy9.jpg
I also don't see anything in "Nokia Phone Browser" when I enter it through "My Computer"
I really need it to work. How can I fix this problem?

Just uninstalled the old version, downloaded and installed the latest version and I still have problems.
I just noticed though that "Phone selector" sees both connections USB and Bluetooth and give me a choice which on to go with, but I can't high light ether one to go to a next page...
http://img504.imageshack.us/img504/488/17101536an7.jpg
One more thing. As you can see on the screenshot, one of the icons shows that my phone is connected, while the other one doesn't. I thought maybe that can help somehow..
http://img528.imageshack.us/img528/307/70993540tn9.jpg
Any ideas?

Problem In using Nokia PC Suite with the new Nokia...

My Nokia Ahs 310 is a new phone I bought and I tried with it to connect internet through my PC using Nokia PC Suite. But, when I connect phone to the PC it tells that it can't find the drivers and install the new device. And in someyimes in Nokia PC Suite it showed as "connected in non compatible USB".
However I can't log into internet using my Nokia Asha 310. Please help me in this regard.

scoobyman, I think KRNS tries to use his Nokia 310 as modem for his computer. Consequently, no Wi-Fi involved.
farby wrote:
The Asha and S40 Series phones released in this Calendar year (2013) are not compatible with the Nokia Suite.
This does not affect the Nokia 310 but only Nokia Asha 501, Nokia 301, Nokia 210, and the Nokia 206 – because my Nokia 310 works with Nokia Suite and PC Suite perfectly. Furthermore, The Nokia 301 was tested with the PC Suite successfully. Same for the Nokia 206. Success reports for the Nokia 210 are still missing.
KRNS wrote:
when I connect phone to the PC it tells that it can't find the drivers and install the new device.
install the latest Nokia Suite. This install the latest Connectivity Cable Driver automatically. Then
install the latest PC Suite (I like its modem handling more)
Nokia 310 » SIM Manager » choose SIM1 (at least for data)
PC Suite » Menu » File » Connect to the Internet
Works here with my Nokia 310, just tested for you. However, I was not able to use SIM2 for the computer. If neither PC Suite nor Nokia Suite worked for you, please say so!

Strange problem with Nokia E5-00 Outgoing Voice

Nokia has swapped my E5 after the old one was not switching on, now the new problem has started I can receive incoming and make outgoing but my outgoing voice won’t be heard on other end. This happens only for few hours in the morning by the evening it the phone works fine.
I faced the problem in the morning then gone to Nokia service centre there it works fine… it happens every day every morning then by the evening
Please suggest a solution

The problem is more likely with your service provider rather than with the phone. Try using the SIM of a different network in the morning or try using the current SIM with a different phone that's known to be working fine otherwise. Once you determine the cause of the problem is the network, speak to them for assistance.

Strange problems with pc suite with nokia 6680

Similar Messages

Maybe you are looking for