Strange quant problem only with 16/16

On both 8.0 and 8.01 I have the same problem.
I cannot quantize to 16/16 in the pianoroll window.
Everything else is possible, including q12 and q24.
Solved with q32 and then q16... ( but its not a cool way to do it)
or quantize entire midi object/track..
Still its a bit strange??

Hey Willy,
Here some additional suggestions that have corrected some PCMCIA difficulties in the past besides the registry edit you suggested.
1. General Troubleshooting to Verify Correct Hardware and Software Installation
Uninstall the PC Card hardware through Device Manager
Remove the PC Card from the laptop
Uninstall the NI-DAQ software
Follow the normal installation instructions (the most important step to remember for Plug-n-Play Operating Systems is to install the software first)
Try the latest service packs for Win 2000 or Win XP
Try the PC Card in a different laptop
Try a different slot in the laptop. On certain laptops PC Cards have been successfully installed in the top PCMCIA slot instead of the bottom.
2. Additional Troubleshootin
g for PC Cards that Return IRQ Conflicts
For E-Series DAQCards:
Update to NI-DAQ 6.9.3 first and then update NI-PAL to version 1.6.1 (included exe file).
Download the attached NI-PAL (ni-cdu1610.exe), and run the installer. When receiving the error "The device is not responding to the first IRQ Level" in Measurement and Automation Explorer, try this method of upgrading NI-PAL
3. Additional Troubleshooting Steps
Try disabling the 3COM adapter, and any other extraneous (for now) devices like any built in serial and parallel ports. The best way to do this is probably to disable them in the BIOS. If the PCMCIA card works properly then try to reconfigure disabled devices one at a time.
Make sure the latest BIOS is installed.
Check for any unusual PCMCIA drivers or other software that might interfere with the PCMCIA driver.
I hope this helps.
Ron
Applications Engineering
National Instruments
Attachments:
ni-cdu1610.exe ‏1557 KB

Similar Messages

HT201066 I have problem with recently with playing DVDs on my iMac. the problem only with DVDs, please anybody can help me solve this problem?

I have problem with recently with playing DVDs on my iMac. the problem only with DVDs, please anybody can help me solve this problem?

Get a lens cleaner disc. One with brushes and try that. CDs and DVDs use different lenses, so since CDs load and play, I strongly suspect a dirty lens.

Install failure due to "faulty DVD" problem: only with Family Pack?

After going through a few threads on the subject of installation failure due to tbe pseudo-faulty DVD, I have the impression that many users mention that they were using a Family Pack install DVD or in one case a "drop in". The former is my case. Please post if you have had this problem with Leopard install, and whether you were using a single licence, family pack or drop in. It's just a hunch, but perhaps this problem only affects a specific set of disks.

I believe that they are holding back on sending a new DVD until they know why there were defective ones. I read somewhere that they require a new SKU so that they will actually be a separate batch.
Can you borrow a DVD from anyone to install Leopard? You certainly would be allowed to legally do that. I am surmising that Apple is overloaded with requests for a replacement DVD and really want to make sure it works. You know that old thing about "fool me once..."
Stuff happens - but with Leopard, a lot of stuff sure happened at once. They sold 2 million DVDs. If only 5% have problems, that's a lot of problems to deal with, one at a time.
In time it will sort itself out, but in the meantime the rooms are full of smoke

"@font-face" problem only with firefox. I have attached a style sheet while i was embedding my personal fonts into a website, but Firefox won't load them. Why?

I was hand coding my new website. This time i was trying to embed some personal fonts into my website, so i used a style sheet to embed which is coded like
"@font-face {
font-family:Sofia;
src:url(../fonts/Sofia-Regular.otf);
All the font work fine in the root folder of my site. But whenever i am creating dreamweaver templates and using them on pages which are in different folders but in the same root directory, the fonts are set back to default font. This problem is only with Firefox. Chrome, IE, Opera etc. works fine. Please Help!

i run into the same problem the last days.
using bootstrap and the fontawesome iconfonts.
everythings fine with chrome an ie, but no fonticons with firefox...
found alot of solutions, but none of them worked.
then, using the webdeveloper console (i used firebug all the time before) i see the error why the webfont was not loaded:
[14:18:36.161] GET http://www.example.com/font/fontawesome-webfont.ttf?v=3.2.0 [HTTP/1.1 401 Authorization Required 21ms]
yes, the site is behind a '''htaccess''' login.
first load after login is => everything ok!
after following an internal link => no webfonts!
after disabeling the htaccess login, everything works fine!
but that can only be a workaround!
why firefox didnt recognize the login/authorization like chrome does?!
what todo if you have your site behind htaccess and want to use webfonts?!

Problems only with Adobe ImageReady Animated GIF

Anyone encounter a problem and solution for getting ImageReady animated GIF working properly in a java app? Developer placed 2 animated gifs in the app which caused the CPU system resources to spike to 100%.
We then tested animated GIFs made from Macromedia Flash and also a freeware animated GIF editor, and both work out fine in the same java app.
It's odd, but we think there's a problem specifically with animated GIFs produced by Adobe's Image Ready in the Creative Suite 1 package.
Anyone have more insight?

Its been a long time since I have used ImageReady, and then it was for about year when CS3 came out. So my memory if very rusty with that program. (In other words I am hoping that I am not too far off base, lol.)
Check and make sure there are the same number of layers as there are frames. I believe there is an option in the animation palette for sending the frames to layers. Once you know that the frames and layers match (plus any additional layers you create), you can clear out the animation and reapply the layers to frames.
You should find a small icon in the upper right hand corner of the animation palette and the layers palette. Clicking them will bring up a menu that will do what you need.

Premiere Pro CC import problem only with last .VOB file

When I import .VOB files from any DVD into Premiere Pro CC, the last .VOB always cut picture from both sides. When I click to see properties of the file (in Bin panel) it shows me that image size is 540 x 576 instead of 720 x 576. The video isn't shrunken but cut off. I got two black bars on both sides of the screen (in Premiere Pro CC). That wasn't happened with CS6 and now it happens always and only with last .VOB file. All other files from same VIDEO_TS folder are imported correctly. When I convert that last .VOB to .avi or any other format everything is OK. Any suggestions?

Yes it works, but I have no time to convert file every time I need something archived that way. I used that method years ago, and if I'm not wrong we are progressing a little Most of today options you have in Premiere 5 (maybe even in earlier versions; I'm using it from version 5.1) and it worked. So if you think like that, why we need version 7.2.1 ? Actually this is 14.2.1 version if you count from version 1 back in 1991.
It's not about to manage, it's about to have what you pay for, it's about to speed up the process.
Thank you anyway for your comment

Airplay iphone problem only with music player

I have seen many discussions relaiting to airplay problems and now that I own both an iPhone 5s and a Bose Soundlink Air. I have discoverd there is possible a problem with Apples' software with the music player.
I have sucsessfully played music from itunes from three Macs in my house to the Bose SoundLink Air via wi-fi. All worked perfectly. I also used Remote from three iPhones, 3G, 3GS and 5S and again all worked fine. I have also used a radio app on each of the three phones and airplayed the radio direct to the Bose Soundlink Air and it all works perfectly.
However, when ever I play music (on the phone) direct to the Bose Soundlink Air, I get the usual complaining from other users of the sound plays for 20 seconds or so then cuts out etc. etc.
As mentioned above, if I play radio direct it works so why can't music (as its now called) on the iPhone. Seams to me the bug is in the music player that Apple has on the iPhone.
I might try another player (like VLC) and let you know if that works then we will know for sure the bug is with Apple.

Okay, Spoke to Bose and explained the problem. He said that because the air play was dropping out with multiple iPhones then the problem was with the unit. He told me to return the speaker system, which I did.
So here's the interesting part...
I then purchased a set of Bose Computer speakers (cheap one's) and a new AirPort Express and found the same thing was happening, 'Airport drop outs'. So I swopped over the new AirPort for my old Airport Express and that has worked perfectly for the past half week.
So my conclusion which I have yet to discuss with my local Apple Store is the new AirPort products are not totally compatible with the old Airport products.
BTW I am using a 2nd gen Time Capsule to send out my wi-fi signal (may be time for an upgrade) but it works perfectly with all the rest of my old Apple stuff (and so far our new iPhone 5s's).

Ipad 2 phantom touching. I have read several forums about phantom touching, but this seems to only happen to our ipad when it is really low on battery. We reset it to factory and took to Apple. Anyone have this problem only with a low battery?

The problem seems to happen when the battery is low. It seems fine now that the battery is fully charged. I took it to Apple Genius and they ran a diagnotic test and everything checke out fine. The tech told me to watch it and if it hapens again they would replace it. It is only a month old and we are already having problems with it. Does anyone know if there is a fix in the works or is the only fix to replace it?

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

When I use my bullzip printer with Foxfire 7.0.1 I get the following message: script engine not initialized to valid language. This is a problem only with Foxfire7.0.1. When I use IE 9.0 it works fine and I have no script initialization problem.

I have been using bullzip printer for years with Foxfire. I am now using a version 7_1_1_0_1218 of bullzip printer I downloaded in March 2011. I am using Windows Vista Service pak 2 with all latest updates.

ah..interesting. I found an alternate solution that works for
us at least
Our authentication is called from a file called
bluestemcookie.cfm with this format
<cflocation
url="https://#CGI.HTTP_HOST#/bluestem/lb_login.pl#AGREEMENT_PATH##CGI.SCRIPT_NAME#"
addtoken="No">
I was having the exact same problem, but notiece that if I
changed lb_login.pl to lb_login.pl? it now understood that
everything after was parameters and off it went to authenticate. Of
course then upon return I had a /? in my url and it burped again.
In looking at the construction of the URL to return in lb_login.pl
#---Construct Return URL------------------------------------
$ReturnURL = "https://$bluestem'R_ServerNamePort";
$ReturnURL .= $bluestem'R_PathInfo;
$ReturnURL .= "?$ENV{'QUERY_STRING'}" if
$ENV{'QUERY_STRING'};
I noticed the ? in the beginning fo the third string
concatenation. hmm.... removed that ? and now all our
authentication with IIS6 CFMX7.1 Win2K3 work fine. Just food for
thought as your solution appears to be better.

Strange linking problem - Only part of word will link

I created a website for my boss to sell his home but there is one link on the entire site that does not work. I haven't seen this problem before.
The URL is www.foxpointhouse.com and the link in question is the text link on the right sidebar called "Printable Brochure." If you try to click on it, you will notice that it doesn't do anything. However, if you click only on the "e" at the end of "Printable Brochure," it will link. I tested this in Firefox, Safari, Opera, and Internet Explorer and it performs like this in all of them so I don't think it's a browser issue.
I've checked my link and it's good. The CSS appears to be correct (at least to me).
Anyone have any ideas?

maglio100 wrote:
I created a website for my boss to sell his home but there is one link on the entire site that does not work. I haven't seen this problem before.
The URL is www.foxpointhouse.com and the link in question is the text link on the right sidebar called "Printable Brochure." If you try to click on it, you will notice that it doesn't do anything. However, if you click only on the "e" at the end of "Printable Brochure," it will link. I tested this in Firefox, Safari, Opera, and Internet Explorer and it performs like this in all of them so I don't think it's a browser issue.
I've checked my link and it's good. The CSS appears to be correct (at least to me).
Anyone have any ideas?
Remove height: 100px; from the css below:
#header {
    height: 100px;
    text-align: left;
    margin: 0 auto; padding: 0;
    position: relative;

E52 internal GPS fix problem only with OVI Maps

Hi all,
I read many many E52 phones suffer Internal GPS fix problems.
I don't beleve this is an hardware problem, but only a software bug.
My experiments say this:
1) Start phone, start Ovi Maps -> No lock at all. (only 1 blinking line in bottom left corner)
2) Start phone, start McGuider (Sygic) navigator -> E52 locks quite immedeately. (in the same place!!)
3) After GPS is locked, start Ovi Maps again. Now also Maps works great!
4) Also the gps built-in application under Menu->Applications->GPS->GPS Data has the same behaviour as Ovi Maps.
Anyone can try and report this or similar experience?
Thank you!

uallaualla wrote:
Thank you for the response.
I'm sure the fix is faster if i use A-GPS, but i i have to pay for data connection.
And, above all, Sygic works perfectly WITHOUT A-GPS, so why Ovi Maps does not?
Yes, you have to pay, but the connection takes about 20sec. About Sygic you're right I noticed that too. It locks pretty fast.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Signal reception problem only with iPhone3GS

I use Airtel and it's signal strength is relatively low inside my house. While the same SIM card with other phones (e.g., Samsung Galaxy or Noika) is able to 3 to 4 bars, by iPhone3GS shows "No service". I am very annoyed with this and started using Nokia phone when I am home.
Anyone has a solution for this problem?

I am also using a Q10, carrier etisalat-UAE
Frequent call drops. Very sad to see Blackberry going like this....Loosing customer confidence at an alarming rate.....Used a BB 8310 > 8910 >9790 and now a Q10....

Audio problem only with some application and with games

Hi,
Some days my ipad2 presents this problem: audio is ok with itunes and when I look a video on youtube but it not work when I use some app (for example, Sky Go, app for cinema to look trailer) or with games.
What should I do?
Thanks

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Cannot connect to AppStore or itunes or icloud. Keeps responding that AppStore can not connect. Although able to use wifi all over the iphone 4s. Having problem only with AppStore n other Apple inbulit apps. Revert

Appstore icloud itunes not connectiong

I had this exact issue. However, I was not even able to "see" the pending downloads when I tried fixing them using the solution above.
In another thread, I saw that someone mentioned an issue with the use of the "&" (ampersand) symbol in your appleID information. I had recently changed my name and it did include the & symbol in my name (not the appleID itself). I replaced the ampersand with the word "and" and saved. I then went to the iTunes store and logged into my account there and made the same change on my billing name.
Voila! I could now access the 7 pending downloads on my desktop Mac and download them, and all iPhone/iPad/Ipods were again able to download from the app store.
incidentally, I had several support tickets open on this issue and never once did the Apple person even suggest that this might be the issue.

Airplay problems only with some wired airplay devices

I am using a Pioneer XW-SMA4 and an Apple TV, both wired to the LAN, as Airplay Speakers.
The Pioneer XW-SMA4 as well as the Apple TV have fixed IP addresses whereas only the Pioneer speaker is setup for sleep mode, the Apple TV is constantly on.
My iTunes on a Windows 7 PC (LAN) shows always both devices being available (even though Pioneer may appear offline/sleep) but my iPod touch 5G (WLAN) will only show the Apple TV. The Pioneer will only show up when I reset the internet connection completely and will go away after some time of non-usage.
How can I setup my iPod touch so that the Pioneer as recognized as being a permanent, fixed IP Airplay device that will autostart as soon as I sent a stream?
WLAN: b/g/n using WPA/WPA2
Thanks for your support!

Have yo contacted Pioneer/went to theri support site?

Strange quant problem only with 16/16

Similar Messages

Maybe you are looking for