Strange red line created when generating pdf from illustraot , why? need help to remove this

I have created file in illustrator (CS2 and CS5 no matter which one), then saved it as pdf file.
when I open the pdfs, there is a red line around the slides and I would like to remove it. It's annoying when viewing the slides.
How do I do this?

Yes, I would try to create a new master document and import the separate files. Even if you have saved all files to CS5.5 spec, there might still be some lingering meta data from the previous version and a fresh import might at least reveal such conflicts or ideally provide a clean slate by dismissing this outdated legacy stuff on import. If you are happy with CS5.5 and everything works, you can get rid of CS3, but I recommend to keep it around, even if you don't use it actively (maening löeave it installed, only deactivate it). Especially the CS3 installer is a fragile creature and a uninstall gone wrong might cause you more trouble than just letting it catch dust on your harddrive. See this article and the other ones related to it on my site for some considerations.
Mylenium

Similar Messages

Bookmarks not created when generating pdf

Hello
I am using 'robohelp for html' and generate pdf files as user guide from existing word format user guide.
I import than and create bookmarks for the TOC of the word user guide.
Now I generate pdf. But the generated pdf file, do not show bookmarks, I also checked in View-Navigation Panels- > but no bookmark icon is there.
I want bookmarks when I create pdf for my documentaion,

Actually my concern is that the elements, I would like to add like bookmarks in the PDF files are in some files of the book, but not all.
I feel that the problem is there.
But why i see some of elements, and not all ?
You do not have to physically use the elements in each file of the book; however, all the files in the book should use the same set of elements. My guess is that FrameMaker does not search through all the files in the book when it generates the list of available elements. It probably creates these things from the first file in the book.
Do all the files in the book use the same set of elements? If not, make sure the first file in the book uses the set that includes all the elements you want to be in the bookmarks.
In my opinion, all the files in the book should use the same set of elements. So, I suggest opening a copy of your template, select all the files in the book, and import the element definitions from the template to the files.

Table Header not Recurring - when Generate PDF from HTML with tables

Hello, It is not working as expected...and I'm not sure if the functionality is supported. Want to create PDF from html document. The html document contains a html table that typically contains a large number of rows. To make reading easier the html table used thead and tbody elements, and their children, so that when the table extends across pages when printed the header element recurs on each page. However, the header element is not recurring in the generated PDF document (it only occurs in the first row of the table). Just wondering if you have tried or used this functionality (created PDF from html with table with headers and the PDF included the table with recurring table header. And if so, did you do anything special to make it work. Thanks for any insight.

If there's a problem with that package, I suggest you speak to the developer of that package and ask them to investigate. It's not an Oracle supplied package so you are wrong to look for help here.

Error message when generating PDF from PageMaker

Hello, Unfortunately my client is still using PageMaker, despite the fact that it is no longer supported. Usually, I have no problem, but this is the error I have had today:
%%[ Error: typecheck; OffendingCommand: get; ErrorInfo: CharOffsets fonts/TimesNewRomanPSMT%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
I'm on Vista, with Acrobat 8.1.3 and I'm printing to PDF from PageMaker 7. It seems to be a font problem, but I don't know how to solve it.
Any help would be much appreciated! Thanks!

Finally managed to get the first two of the 3 books (making up the full publication) printed by doing "Export". The third one, which has been causing all the trouble has started giving me the font message again:
%%[ Error: typecheck; OffendingCommand: get; ErrorInfo: CharOffsets fonts/TimesNewRomanPSMT%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
I had ensured that the PDF box said "warn and continue".
I also get a dialog box telling me that only even pages will be printed, although I have specified even/uneven in the print dialog, and that blank pages will not be printed, although I have checked the blank page box.
Have tried to "Print" to PS and I have managed to generate a PS file with only a message telling me that Helvetica Neue could not be incorporated, which is fine. However, if I then try to create a PDF, I get the message above. Does this mean that my problem is with Distiller rather than in the file?
I have never had this problem before, and am baffled.

Transparency issue when generating PDF from InDesign Server

Hi there
Has anyone experienced any issues with transparency appearing solid white when generating a PDF from the InDesign server? There is no issue when exporting from the InDesign application, only when using the Server.
Any pointers / suggestions would be much appreciated
Thanks
Davey

Davey, please send me an InDesign Server document that I could use to reproduce this problem. My e-mail address is [email protected] Thank you. --DougR

InDesign 5.5 crashes when generating PDF from book file

I hope someone can help!
My employer has agreed to upgrade from CS3 to CS5.5 and I will receive the install disks next week. In the meantime, I downloaded the trial version of CS 5.5 Design Premium and installed only Illustrator, InDesign, Photoshop, and Acrobat. I kept CS3 on my system.
My problem is with InDesign5.5. I can generate a PDF of a single page, but I cannot do the same for a multi-page document (10 or so files) from the book window. InDesign immediately crashes (unexpected close message) but doesn't close until I force quit the application. When both CS3 and CS5.5 were on my machine, I was having the same problem even with CS3.
I removed CS5.5, but still had the same problem with CS3. Tried reinstalling CS3, but continued to have the same problem. Removed CS3 and re-downloaded CS5.5. Same problem. Removed CS5.5 again and completed a fresh install of CS3. This finally worked to allow me to use CS3 successfully again.
However, I need to be able to work with newer InDesign files that have been created in ID5.5 and can't do this without installing the new disks that arrive next week.
What can be the problem?
OS: Windows XP Professional 2002, SP 3
Computer: Intel(R) Core(TM)2 Duo CPU T9600, 2.80 GHz
Memory: 3.48 GB of RAM
Video card: 512 MB NVIDIA Quadro RX 2700M
Thank you!
Jenny

Yes, I would try to create a new master document and import the separate files. Even if you have saved all files to CS5.5 spec, there might still be some lingering meta data from the previous version and a fresh import might at least reveal such conflicts or ideally provide a clean slate by dismissing this outdated legacy stuff on import. If you are happy with CS5.5 and everything works, you can get rid of CS3, but I recommend to keep it around, even if you don't use it actively (maening löeave it installed, only deactivate it). Especially the CS3 installer is a fragile creature and a uninstall gone wrong might cause you more trouble than just letting it catch dust on your harddrive. See this article and the other ones related to it on my site for some considerations.
Mylenium

REP-0499 when generating PDF from report

Hi,
I have a simple query in data model where I'm selecting Oracle database object :
select a.shape from table a;
shape is shapedefinition type that is composed of :
Axis varchar2(1),
x number(2),
y number(2),
z number(2)
when I generate report it works fine but when I try to generate to PDF file I get this error : REP-0499: Column 'Axis' selected by the query is incompatible with report definition
But when I run similar report but database object is composed entirely of number types I don't have this prob.
As far as I can tell, nothing has been changed in Database and it seems like this error only happens when I try to select from database object that contains varchar2 type.
Any help will be greatly appreciated.
Thank you,
Keeyang

Davey, please send me an InDesign Server document that I could use to reproduce this problem. My e-mail address is [email protected] Thank you. --DougR

Automatically display the Bookmarks panel when generating PDFs from Word

I have about 500 PDFs to generate and I like to have the Bookmarks Panel & Page as the setting in File Properties - Initial View - Navigation Tab. I am generating the PDFs directly from Word using the Acrobat Plugin. I was hoping I wouldn't have to make this setting manually for every PDF...
Thanks in Advance!
Camille

You can use a action in Acrobat X Pro to set the initial view of all documents in a folder.

Stitch lines created when transparency flattened in PDF/X1a export from ID

Has there been any sure fire methods to avoid the digital stitch lines created in a PDF/X-1a due to transparency flattening during export from InDesign? Currently using CC and have done the usual things in an attempt to avoid the lines such as all text above transparent objects on a separate layer and 'Clip-Complex-Region' on export.
Thanks in Advance!

Hi Tony ,
This seems to be an InDesign issue .
Please report the same on the below mentioned link .
InDesign
Regards
Sukrit Dhingra

Unable to mark the box 'create Multi-page PDF from page tiles' when saving to pdf-file

I am running Illustrator CS3 on a Mac OSX 10.5.8
I want to print a very large illustrator-file (1000 mm x 900 mm) across mutliple pages of A4-paper (5 x 5 sheets of A4-paper) by saving the file as a multi-page pdf file.
I first followed the instructions provided here:
http://helpx.adobe.com/illustrator/kb/create-mutli-page-pdf-illustrator.html
When I then tried to save the file: -> File -> Save as -> 'choose .pdf from drop-down menu'
I get to this menu:
I am unable to mark the box that says: 'Create multi-page pdf from page tiles'. I have made a red arrow pointing to the box I want to mark.
I have tried changing the other drop-down menus inside this menu, to see if the box I want to mark could become available, but without any luck.
I am not sure what I am doing wrong. I would be grateful if anyone could help me set my settings right to allow me to create such a multi-page pdf-file.
Thanks in advance for your help

Your ps file should be good, the problem likely resides elswehere. Maybe in your acrobat install, distillers settings. what error did distiller give?
Mine ran good and got a multi page document, here is a screenshot to help you troubleshoot.
On mac go to system preferences / print and fax / and change your default printer if you have another option. I know sounds like this should not help, but there are problems like Illustrator for example not making .pdfs if you do not have a printer chosen or an old or corrupt .ppd assigned.

Stitch lines created in a PDF/X-1a due to transparency flattening during export from InDesign

Has there been any sure fire methods to avoid the digital stitch lines created in a PDF/X-1a due to transparency flattening during export from InDesign? If I attempt to edit the PDF using the Acrobat Edit Text and Graphics tool the PDF is actually carved into sectors and images are not selectable as a whole. Also contrary to what I have read those white lines do indeed image from time to time. I could export as PDF/X4 to preserve the transparency but on occasion it would be advantageous to flatten it before supplying to the printer. Currently using CC and have done the usual things in an attempt to avoid the lines such as all text above transparent objects on a separate layer and 'Clip-Complex-Region' on export.
Thanks in Advance!

If the default High Res flattener preset is stitching make a custom preset that's all rasters and use it in the advanced tab of the PDF/X-1a preset

Generating PDF from Microsoft Word with C#

Hello,
We have created web-based system for a customer that stores/handles Microsoft word documents and provides these to users as PDF versions. Unfortunately some problems appear with our third-party component that generates PDF from Word. Our customer has previously used Adobe Acrobat X Pro to manually generate the PDF files and is confident that the output produced this way is valid. Despite searching and reading a lot I can't find any way to determine if (and how) it is possible to automate the process of generating a PDF file from a Microsoft word file using the Adobe engine. There is a lot of SDK documentation, how to control PDF rendering in winforms applications etc. etc. All I want to do is to load an Adobe Acrobat instance, feed it with a word document and save it as a PDF on disk. From a C# app (ASP.NET). Is that possible?
Best regards
Jan Hansen

As mentioned, you can probably send the DOC file to the Adobe PDF printer to create the file. What I keep reading in your post is a legal issue. You keep mentioning being able to create the PDF on a server automatically. The server use of Acrobat is a violation of the EULA. If you are creting the files off-line for posting as has been done, there should not be a problem. However, having these created in an automated manner by the user may be an issue. Before you go much further, I would check with legal counsel about the use of Acrobat in the way you intend. If they indicate there is a problem, then your question is not needed.
Back to the issue. Try just dropping a DOC file on the Adobe PDF printer icon (you may have to open the Start>Printers to do that. See if that creates the PDF. If so, you will just need to automate that process.

Missing page numbers while generating PDF from Framemaker book

FrameMaker 9 book files have the correct master page applied and page numbers appear right. However, when generating PDF, the page numbers including the footer is missing.
I created another book file, yet same issue occurs.
Also, tried generating separate PDF for each chapter, same issue occurs.
I have installed Univers font from ATM, I'm using WIndows XP. The Footer tags are in Univers font. Could that be the reason?
Please advise.

Error7103 wrote:
We have seen a similar problem when the page# was at the right edge of the header or footer frame, and the tab that put it there was too far to the right.
This is an old problem. It comes from setting tab stop positions in paragraph formats with the cursor in the text frame on the TOC reference page. Nothing wrong with this, EXCEPT when the master page text frame has been made narrower than the reference page's text frame. One way to avoid the problem or to fix it, is to set tab stops in a paragraph in the body page text frame, so the width is correct. Another way is to set the tab stops accurately by number, rather than by eye. Visually, the reference page tab stop will look correct, but the generated TOC uses the master page text frame - if it's narrower than the reference frame, this problem occurs.
I seem to remember that this might have been fixed in more recent FM releases, but I think that's a false recovered memory, because this is not a bug, just a discrepancy in measurement. There's no way to expect that the prototype paragraph format on the TOC reference page can know if a tab stop will be out-of-bounds on the generated TOC page.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

I am able to generate PDF from Framemaker file but not able to generate pdf from book in robohelp

Hi,
Using robo help i am able to generate pdf from a single framemaker file.
but when i am importing whole book then i am not able to make it.
And also it is not showing any error on console
It goes to hang like situation and i have to close it from task maneger.

Ok, silly question - why are you bothering to try and create PDFs from RH when you've got FM? FM to PDF produces great results; RH to PDF involves having to go through Word - i.e. RH - Word - PDF = too much work IMHO.

JNDI error while generating pdf from crystal reports in java

Hi, i want to generate PDF from crystal reports in java. I have the .PDF file with database configured into the report. Following details are available in report.
1. Server Name      = testdb
2. Database Name = testdb
3. User
4. Password
I am using CR XI.
In CRConfig.xml i had given following details.
<JDBC>
     <CacheRowSetSize>100</CacheRowSetSize>
     <JDBCURL>jdbc:oracle:thin:@192.218.216.102:1521://TESTDB</JDBCURL>
     <JDBCClassName>oracle.jdbc.driver.OracleDriver</JDBCClassName>
     <JDBCUserName>user</JDBCUserName>
     <JNDIURL>password</JNDIURL>
     <JNDIConnectionFactory></JNDIConnectionFactory>
     <JNDIInitContext>/</JNDIInitContext>
     <JNDIUserName>testdb</JNDIUserName>
     <GenericJDBCDriver>
          <Default>
               <ServerType>UNKNOWN</ServerType>
               <QuoteIdentifierOnOff>ON</QuoteIdentifierOnOff>
               <StoredProcType>Standard</StoredProcType>
               <LogonStyle>Standard</LogonStyle>
          </Default>
     </GenericJDBCDriver>
</JDBC>
When i am calling from java as standalone, i am getting following error.
JRCAgent1 detected an exception: Error finding JNDI name (testdb)
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)      at com.businessobjects.reports.sdk.b.i.if(Unknown Source)
Can anyone let me know where is the problem?

Actually, the question boils down to; does the framework support the fonts?
I believe that my question re. this working in the designer was valid. The designer does not use the framework, so if it works there, it is either a framework issue or a runtime print engine issue.
I believe if you use the code below, it will list fonts available to the framework:
foreach(FontFamily ff in FontFamily.Families)
System.Diagnostics.Debug.WriteLine(ff.Name);
For more information see kbase [1198306 - Crystal Report displaying incorrect font in Microsoft Visual Studio .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133393338333333303336%7D.do]
Ludek

Strange red line created when generating pdf from illustraot , why? need help to remove this

Similar Messages

Maybe you are looking for