Strange red shadows in backit portrait in ACR - but ok in ViewNX
I've recently been processng NEFs from a D300 using ACR without any problems. Until...
The following photo has some very wierd red shadows when imported using ACR5.5. But when viewed using the Nikon ViewNX 1.4.0 they look perfectly ok. I've also tried using ACR4.x (the one distributed with PE6) and it's just the same as 5.5. The whole batch of photos taken using this lighting setup show the problem. I was using a Dlte2 on minimum power behind the subject pointing toward the camera and reflectors on the sides. The camera is using the AdobeRGB space.
http://cpalmer.me.uk/public/20090918-_KTP6886.NEF
The problem is most visible under her chin to the right of her hand, and on the hair just up and to the right of there.
I'd really appreciate any insights as to why it appears so "badly" in ACR but looks fine in viewNX and in-camera. And how I might proceed with processing these...
Many thanks
Chris
Your shadows are clipping at ACR default of 5. Dragging the black slider to zero should fix the problem.
Similar Messages
-
Strange red light in back of the system.
Hello everyone,
I just received today my new-like condition G5 Quad today and I have a question regarding the red light in the back. Where I see the digital audio ports I noticed a red light on. Is this call for concern, or is this normal? Also, the startup chime is working through the internal speaker and not through my main speakers. Is there a work around for this?
NadavIs the red light coming out of the jack or is it inside of the machine? If inside the machine, this may be helpful: About the Power Mac G5 (Late 2005) diagnostic LEDs
I believe that the startup sound coming from the internal speaker is just the way it is.
Luck-
-DP -
Strange RED HIGHLIGHTS appears in my print documents
Strange RED HIGHLIGHTS appears in my print documents, but in the preview dont been showed, whats happens.
OS: Windows XP
Acrobat Reader Version: 8.1
Printer: HP2605dn
Ram: 512 mb
Processor: 1.4 Ghz P4Eliezer...go to the Print dialog box and click on the Advanced button on the bottom left of the dialog. When the Advanced window comes up go to the lower left corner and put a check in the Print As Image box. Then click OK and then try printing. This is a print driver issue and hopefully checking the Print as Image box will let you print without the red highlights. Good Luck!
-
i see strange red light the bottom the my Mac pro black cylinger. its went out about less than 3 sec. so what was that??
Infra red refers to a spectrum of light normally 'invisible' to the naked human eye. Probably, the film is splitting this light, causing some wavelengths of light to interfere with each other and produce interference wavelenghts, which fall into the 'visible' band. Like in radio where two or more signals can combine and produce a third 'interference' signal, so as in light, and indeed sound. They're all waves, just at different frequencies. I'm sure I read another post some time back of a person able to see the light transmission from the IR sensor.
Have you tried looking at it with a digital camera ?, most of these don't include any IR filtration and as the sensors are IR sensitive, they will 'show' the IR transmitted light. (A good way of verifying if your IR remote control is working is to look at it with a digital camera while operating it and looking for the now visible light beam being emitted).
I know I've gone on a bit, but at least I believe you saw a light and I thought I'd offer my take on the causes. -
Shadows slider in Elements 7 ACR 5.6
I started shooting in jpeg + raw with my Nikon D90. I’m trying to learn how to make my images as accurate as possible. I bought a book about using camera raw that seemed to be aimed at the version of Photoshop Elements I use, Version 7. However, in addition to dealing with acr in Photoshop Elements 7, it also deals with similar versions of both Photoshop and Lightroom.
I’m trying to optimize an action shot of a fourth grade football team, taken between 12pm-1pm with daylight saving time, so the lighting would be 11am-12pm standard time. I figured this would be a good image to play with because the white balance would be fairly easy to set.
One team had white pants, white helmets, and deep red jerseys while the other team had white pants, white helmets, and white jerseys. Because it was basically bright noonday sun, it is a high contrast scene, with both shadows and highlights clipped. I realize the image is beyond the dynamic range of the camera senor, but I want to get it as close as possible. I’ll probably have to let a few highlights go, in addition to specular highlights that occur on the helmets and white uniforms.
In a section of the book dealing with shadow and highlight clipping, there is a reference to a “shadows” slider. However, my acr, version 5.6, has no shadow slider. Which slider in my acr interface is the equivalent slider? As far as I can tell, the book makes no mention of either the recovery or fill light sliders that are on my acr interface, except to show them within a figure.
I want to use the “alt key” option to view the clipped shadow and highlights to help optimize the exposure and other things.
Your assistance is very much appreciated.Try the Blacks slider, right under Fill Light.
-
Hello, i just updated to the latest bootcamp and im pretty sure as a result i am getting some text red when it should be blue. This can be on webpages on the log on screen and other places.
I also noticed on the title bar of the window (^^ where it says Apple - Support - Discussions) it has a red shadow which is very annoying and looks kinda strange.
This might be coincidence but when i do a google search the words i search for are are red in the results. the same kinda red everything is changing to.
Anyone have any idea? Maybe a virus or something to do with the update.
Thanks for any help
TomOriginally Posted by NovAlf
Strange ZEN logout event triggering
Hi!
ZCM 10.3.2, Windows XP/7, Novell Client installed, have a bundle associated to device and should be triggered at ZENworks logout. This all seems to work ok, in ordinary way. But, when user auth is ok with Novell Client (against eDir), but is not attached with DLU via ZEN and appear Windows Workstation login screen and user cancel this dialog and return to Novell Client login screen, then before mentioned bundle is triggered, in some unknown for me reason. Because there is no ZEN login, not speaking about logout. I have similar bundle set to trigger at user login ... it does not run same way. Also, don't see same behavior when bundle is set to run at user logout.
Any ideas?
Btw. this kind of cancelling login is seems to related to getting a'lot of Bundle.ItemCreationError's described in http://forums.novell.com/novell-prod...ionerrors.html.
More thanks, Alar.
Hi Alar,
Do you have any update on you problem because I have the same issue and I am wondering if you found any way to bypass it??
I found another thread but no solution:
http://forums.novell.com/novell/nove...ter-login.html
Thank you in advance for your answer,
OAKFND
PS: Zen version is 11.1 -
My phone is saying all my storage for pictures is taken up when I only have 154 picture.. It happened when I got my screen fixed at a kiosk in a mall and I had 2,000 pictures when I gave it to him and when I got it back I had 0 but my wallpapers remained.. Very strange it's as if my phone still has the pictures on there.. But I can't see them. Anybody know what I should do :( I keep having to delete apps because I have no more storage for no reason :(((
You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.
-
T61 display artifacts (blue stripes and red shadowing), external monitor is fine
Hello everyone!
I have a Lenovo T61 laptop that's just (in March) ran out warranty and obviously developed peculiar single-pixel-level artefacts. Now I know that these kind of problems are generally solved by buying a new laptop, but I'm not convinced that this isn't a software problem. Given below are my observations, so, engineering minds, let's unite and please help me solve this.
Relevant specs:
OS: Windows XP SP3 & Ubuntu 11.04
GPU: Nvidia Quadro NVS 140M (version 266.58)
TFT Panel: 1440x900
The big problem:
White display areas have every other column in cyan (Image A), black areas have red shadowing (Image B). The artefacts are present in both OS and in the BIOS screen as well (which is really bad, I know). Red and cyan is both due to the red channel, so we can narrow this down, other colours are displayed fine.
The PECULIARITY of this artefact is that it is only present for:
Cyan columns - pixel values above 247
Red shadowing - pixel values below 4 (And I mean EXACTLY those values, value of 4 - no artefacts, value of 5 - completely unbearable. See Image C, where this display is photographed while showing two patterns with only that slight variation is pixel values. Patterns are attached as D)
Middle gray (value 127) causes flickering, while 128 is perfectly fine.
Solutions tried so far:
Reinstalling GPU drivers - no avail
Setting display contrast to < 35% in Nvidia control panel - artefacts dissappear nearly completely.
I've never heard of such a thing, but since the causing values are so exact I can't believe that this is just fried panel or a broken cable.
So what do You think?
Regards,
LukasWelcome to the forum!
Your GPU is failing.
Lenovo might or might not fix it, although it's out of warranty. They are *extremely* well-aware of the problem that plagued these chips.
Reading related threads here or on Bill Morrow's ThinkPad Forum will reveals hundreds - if not thousands - of similar cases...
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
Strange red boxes appear around my ap icons on safari and firefox when looking at iCloud and also in some aps like iPhoto. It does not appear in Chrome...
Can anyone help?I see you have damaged both your hardrive(hardware) and your operating sytem (corrupted too, software)
You may want to run an diagonstic test of your hard drive complete before trying to reinstall windows.
Press ESC right after power button and repeatdley and look for Diagnostic test and start up test and hard drive test.
Please report results.
Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
**Click the White thumb if you like the answer.**
**Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert. -
In iphoto 6.06 I make the red eye changes, it appears to have worked, but when I open the pic again the red eye is back.Advice?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
Red box "Write Back Error" OBIEE 11.1.1.6.0
Hi, are there anyone here succeed setup writeback in obiee 11.1.1.6.0 windows or linux system?
I have tried every tutorials on the internet, but always stuck in red box "Write Back Error" and don't have any clue in the log files.
thanks.hi Devarasu, thanks for reply, I have done all your instruction but still no luck, red box with "write back error" always appear. Do you know how can I track it down? Or should I patch or upgrade to 11.1.1.6.2 BP1 ?
-
what is the best way to charg my ipod tuch is it bad to kill the batery fully our leve it in the red pleses get back to me asap thxs
pleses i dont want to distroy my ipod thxs
chadWhatever you do in terms of charging will not destroy your iPod.
Many people charge when it's convenient. Others just connect the iPod for syncing to the computer and leave it charging overnight, regardless of the ramaining charge level. Life of modern batteries is measured in full charge cycles. A charge cycle is either a full charge or any combination of small charges that adds up to 100% charge.
The only real recommendations I've seen (including from Apple) is to keep the batteries away from heat and have a full charge once a month. For this, discharge the battery to about 20%, then fully charge. -
There's strange red line appearing on right side of canvas in the browser. The red line is not visible on the standalone quicktime player.
Here is the example: http://www.tordiaimages.com/uploads/redline.pngYour terminology is very confusing, because "canvas" and "browser" mean one thing to FCP users and another to non FCP users.
You're saying the red line only appears when you play your exported video in Firefox. If that's true, it's quite clear where the problem lies. Just explain this to your client. -
Black has red lines and strange red color pattern in it!
I have an HP Touchsmart 520 - 1030 windows 7 all in one. When I turn on my computer and the Windows icon in the middle of the screen appears what should be a black backrground behind the icon is dark red. Once it boots up completely, everything black has a strange red lines and patterns in it.
Is there a fix for this?Hi Lysa13,
You could try re-installing the graphics driver. If that doesn't work, it's possible the screen hardware could be starting to have problems.
Here is a link to the graphics driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-98005-1&cc=us&dlc=en&lc=en&...=
If that doesn't work, you may want to try running a screen test in the hardware diagnostics. Here is a support document that explains how to do the tests:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02491515&cc=us&dlc=en&lc=en&product=5157108
...an HP employee just trying to help where I can, but not speaking on behalf of HP. -
I bought a 50 in Samsung plasma screen TV in November of 2010. A couple of months ago, we started to notice that there was red shadowing on the screen while watching shows. It is not a broken pixel as it moves like thepicture does. It is getting worse and worse. Is there anything that we can do?
Lvhvb12 wrote:
I bought a 50 in Samsung plasma screen TV in November of 2010. A couple of months ago, we started to notice that there was red shadowing on the screen while watching shows. It is not a broken pixel as it moves like thepicture does. It is getting worse and worse. Is there anything that we can do?
This is most likely a voltage issue that Samsung released a firmware update for. Check your firmware version and see if there are any updates available.
Maybe you are looking for
-
How to have 2 Users on 1 Mac and both be able to use the same iTunes Library?
We are using 1 Mac with 2 Users, how can we both use the same iTunes Library?
-
LOAD_PROGRAM_LOST
Dear all, SAP ECC 6.0 , AIX , Oracle 10g I got the error in prod server (LOAD_PROGRAM_LOST) and Pls check the log also . Runtime Errors LOAD_PROGRAM_LOST Date and Time 23.06.2010 16:18:04 Short text Program "GBTGEFI0" was modifi
-
List all files in a directory on a server that hosts the applet
Hei :) I have a problem. I want to list all files in a directory on my server. ( http://www.foo.bar/tw ) The applet is in the root folder ( http://www.foo.bar ). So i tried it like this File fi = new URL(getCodeBase() + "/all/").getFile();But when I
-
Recently,I start to pay attention to the function 'Kinect Fusion Explore Multi Static Cameras sample' In SDK 1.8. Here ,I use two kinects ,but I have no idea how to change the parameters(x,y,z &dictance) in the red rectangle to make it work success
-
What happens if a program contains un-necessary imports?
Hi, If a program imports unnecessary classes/packages, will it effect the performance of the program? for example: import java.awt.*; // nothing to do with the classes of java.awt package class Test14 public static void