Strange restart screen happening and advice needed on new imac purchase
Well first thing first, i just sold my imac 20" CD for a refurbished 24" iMac C2D directly from apple. The first thing i noticed is screen during the restart process that i have never seen on the multiple macs that i have owned. It looks like terminal/ms-dos with a black screen and lines of white text that indicate what is going on in the restart process. it doesnt really affect anything, i just don't really like it showing up, i would rather have the grey apple with spinning marks under it. Is this a setting somewhere that i don't know about?
And for the second thing. Because of this black screen that happens during start up i noticed.....a green stuck pixel... I am pretty picky about my things and when i noticed this i started freaking out a little bit. I know that stuck pixels are very common in LCD's i just didnt really want one in mine. I tried massaging it and all of the programs out there that are supposed to "un stick" it with no luck. I know apple is not likely to replace a unit for a single stuck pixel but i was going to try my hardest to get it replaced until......i looked in the system information and noticed that i somehow got the upgraded gforce 7600 256mb video card. So my question is should i stop complaining and take the $125 video card upgrade for free or try and get my unit replaced for my stuck pixel. BTW, the stuck pixel is only viewable on black/really dark screens and it is located in the middle display, about 2 inches right. Thanks in advance
A very tough question to answer. I am a little picky also and a stuck pixel would drive me up a wall. But have you tried to reinstall the system to see if it fixes the weird startup. Weighing the video card against the pixel I would have to go with seeing if apple could fix or repair the screen without switching the machine. If it is still under warranty they will try to no end to repair it before they just send you out another unit.
So I guess my answer is to make them repair the system thus saving you your video card.
Similar Messages
-
I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!
Hi
That screen grab helps a lot. There’s a much easier way of doing what you’re doing.
Remove all your tabs and set the text in justified paragraphs.
I’ve typed in dummy text in the example I made below, but after “19.1” put in a space and put your blinking cursor after the space and before the ’N’ of ‘Notices'.
Then hold down the Command key and hit Backspace (on Mac at least - it’s the key between the Inverted commas/ apostrophe key and the return key).
The text will jump into place the way you want it to.
Hope that helps
Paul
PS You can set a tab, instead of using a space, in the description I gave above. So, after 19.1 or 19.2 or 19.185 etc etc insert a tab, then hit the Command Backspace after every paragraph number and they'll all line up exactly together. You'll find that editing text within the paragraphs
after you've set it will be LOADS easier this way.
You can put the tab anywhere you want it to be using 'Command-ShiftT' and putting a 'left align' tab just after the number. Just type the Command Backspace after the paragraph number and it'll work -
I have an iphone 5c and i need a new lcd screen what shall i do
i have a iphone 5c and i cant use my screen they said i need a new lcd screen but how can i do it and where
Take it to an Apple Store, if you have them in your area, or contact Apple Support to arrange ship-in service. For full details on how to proceed, see:
http://www.apple.com/support/iphone/repair/
Change country as appropriate via the link at the lower-right of the page.
Regards. -
No IP address, everytime I'm close to my mums mac running off the same wifi, it's giving me this error. I can trouble shoot for about 3 mins and fix it, but it just keeps happening and I need a permanent fix for it. Any help?
this is what you need to do to exclude everything apart from desktop.
on time machine preferences, click on Options
click plus sign, on the new window, click macintosh HD
do a Control + A then deselect users then click okay
go to options again, plus sign, go to users, control +A then deselect your user account
go to options again, plus sign, go to your user account, control + A, deselect desktop
start the back up. -
My iPhone 4 is water damaged and I need a new phone, do I have to make an appointment or can I walk in store and pick one up
Make appointment
Bring credit card
Allan -
my mac has the VGA port and I need a newer monitor for it. what do I use that will connect it. I had a new dell monitor and none of the things that dell said worked. so I am going to get a mac monitor for a second unit.
my laptop is a 2008 modelHmmm... 2008 MBP has...
Video (Monitor): 1 (DVI)
Details: Supports external display in dual display and mirroring modes. VGA output provided by included Apple DVI-to-VGA adapter, S-video output provided by optional adapter (sold separately).
http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-2-duo-2 .5-15-early-2008-penryn-specs.html -
I had a 'dead' iMac repaired and it needed a new HDD and graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I have no idea what this will be. can anybody help please?
<Personal Information Edited by Host>On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R -
My computer crashed and I need a new serial number. I have my product key
My computer crashed and I need a new serial number. I have my product key
Duplicate thread http://forums.adobe.com/thread/1204907
-
i've got a vodsaphone payg sim: i've been given an iphone 3g, and when i connected it to my mac and itunes, a message told me that the sim was :not compatible" with the iphone. is this because, as i've been told, my card is an old style sim and i need the newer style that works In smart phones? if so, how do i go about getting the right card.
Contact your carrier & get a new sim...they should give you one for free.
-
So I accidentally purchased 20,000 coins from hanging with friends for $99.00 and I need to cancel that purchase. How do I do that
Welcome to Apple Communities
Contact with iTunes, but probably Apple won't refund you -
I need to change the home folder name. I just bought this mac today and my cousin put his name in because he had to back up his phone while we were still at the store so he could get a new phone and now my brand new imac says his name in the home folder. This is very frustrating. I would not have let him put his name in there if I didn't think you could change it. Someone please help!
Delete his user account and create your own, using your name.
-
I have forgotten the answers to my apple security questions. I have tried several times but just cant get through and I need to make a purchase for the first time
I am having the same problem. I know my apple ID and password but do not remember my security questions. How do you go about changing the security questions? Please help.
Thanks. -
Does anyone know how to change your country location ? I am currently traveling and I need to make a purchase and do updates. My App Store tells me I need to switch to a US store to make purchases.
Unless you live in the country and have a credit card with a billing address in the country-you don't.
http://www.apple.com/legal/itunes/us/terms.html#GIFTS
"The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance."
Substitute whatever your home country is if it is not the US, terms are the same. -
i have a 4s and i need a new one i was wondering if they can check to see how much the one i have now is worth and then i can just pay the difference like that
No, Apple does not take trade ins. Your carrier may have different polices regarding trade ins. Best to contact them about it.
Alternatively you can use Apple's Recycling Program with one of their partners. They will give you an Apple Store Gift card with the value they determine the iPhone has. And you can use the Gift card in the purchase of a new iPhone.
You can go here to see how much your current iPhone 4s is worth in the recycling program.
http://store.apple.com/us/browse/reuse_and_recycle -
We have a Sony Microcassette-Transcriber M2000 and we need a new foot pedal. Do you still make this?
Hello Hollye,
Greetings and thank you for your post. We apologized for the late response , based on the model you have provided it seems that our parts and accessories department has a replacement available since the original is already discontinued. The following information will provide access the parts and accessories website and also the part number of the pedal :
Original part number : 891691130
Model : FS-25 FOOT PEDEL ZZ
Replacement part number : 177121916
Model : FS-80 REMOTE CONTROL
https://servicesales.sel.sony.com/ecom/accessories/web/index.jsp
If my post answers your question, please mark it as "Accept as Solution"
Maybe you are looking for
-
Can i use one router connected to my cable modem and another....
can i use one router to connect to my cable modem them have another (not connected to a modem) and a wireless reciver so i can plug my xbox 360 into it?
-
I am trying to get logic to trigger Digital Performer using 2 seperate computers. The reason for this is that I need to use Atmosphere on a project and Atmosphere drivers are not Intel ready yet. I am running logic into a MOTU traveller - and taking
-
Hi all there is an error for the below statemnt APPEND 'Techn.Platz' TO it_fieldnames. " Statement not accessible" Thanks Protyusha
-
Hi all, I have created a vi to generate random numbers and plotted on graph (totally max of 8 plots on waveform chart - based on user's selection) via normal labview project explorer window. It worked.. GREAT!!! Same vi I tried to port to a mobile p
-
HT1386 I'm having a problem syncing my Iphone 4 to iTunes.
I am having a problem syncing my Iphone 4 to Itunes, how can I fix this problem?