Strange selection problem

Hi,
You know when you have a group but one of the paths is hidden you don't get a full sized square when you click on the group in the layers panel?
I'm getting that with a compound path...
I can't seem to select the whole path. There's also some strangeness going on when I try to move the path.
Any ideas?

No guides. It was an odd one, if I tried to move the path it disappeared, it was still there in the layers panel but it was empty the second I touched it and tried to move it.
I cut and pasted the path and everything was ok after that.
A glitch in the matrix
Thanks for the reply.

Similar Messages

Very strange MRP Problem

HI ALL
I am having a very strange mrp problem and that is
I created a material with all mrp1and mrp2 requirement,created the info record and source list for that material.I created a reservation for that material which in turn created the deficiency when I did the MD04.I run the MD03,as per re-order point and fix lot size two Preqs created( vendor was not shown in the Preqs even though I established the source list for the material?).I change these Preqs into PurOrds and did the Gr.Every thing fine till here all changes happened in material requirement list(MD04).Now I did one more reservation and created the deficiency again and run MD03 again with a message that mrp done but this time when I went back and checked MD04, there is no Preqs shown and deficiency remained same as was before. I did the same exercise on several material and every time I am having the same problem as the 2nd time the Preqs don't show in MD04. Please help me as I check upto my knowledge but unable to resolve this one.

what is the control parameter of the MRP run that you select.

Strange wifi problem on a brand-new MacBook Pro

Hey there, I'm new here. Desperation has got the better of me, and I hope I can get some advice.
So, last sunday I bought a brand new 13" MacBookPro with 2.8g i7 processor and 10.7.2 OS (I can't update to 10.7.4 because System Update tells me the download has been tampered with or corrupted after I waited 2 hours for it to finish, but I'm trying a direct download from the website). Here's the exact product: http://www.amazon.com/Apple-MacBook-MD314LL-13-3-Inch-VERSION/dp/B005CWIZ4O/ref= sr_1_5?ie=UTF8&qid=1340301247&sr=8-5&keywords=macbook+pro+13
Everything is all perfect except for a strange wifi problem. Note that the wifi does not turn-on or off, it doesn't disconnect after 'sleep', it doesn't get less speed, it doesn't constantly leave a preferred connection (once I chose my home wifi it always connects to it no problem). The wifi bar is always full. What is wrong is that the internet is kinda 'glitchy'. The best metaphor I can think of is that it's like a car that has to be pushed down the road before the engine can start. Please, bear with me because this is kinda hard to explain and I'm not good at tech lingos.
One of the symptoms is browsing can get really slow and inconsistent, almost as if the wifi gets turned off in the middle of browsing. For example: if I look something up on Google and then open 5 new tabs, probably only 2 or 3 of those tabs will eventually load while the other two will not get past the long 'http:.......google.....etc etc' address and will eventually show one of those 'error loading page because there's no Internet connection' notice. This happens a lot. Sometimes I have to refresh/retry loading a page a couple of times before it finally loads, then usually everything will get back to normal and I will be able to open multiple tabs with no problem, but in a couple of minutes I would try to open another site and the problem will start again.
So I tried to see how it does with downloading using iGetter. Fortunately I also have a Macbook (white-plastic casing one) and my brother has an old 2006 MacbookPro so I can compare. With those two older Apples iGetter starts receiving data in less than 8 seconds after I click Start, while my brand-new Macbook Pro can take up to 15-20 seconds, sometimes it doesn't even start at all and I have to re-click the start button. But once the download actually starts (on my new MacBook Pro), it downloads like normal, it doesn't stop and the speed is also as good as I can get. Strange huh? Hence, like a car that has to be pushed before the engine starts.
I also tried 'speed testing' from a website with all 3 laptops. On my old MacBook and my brother's MacBook pro, once I click 'begin test' it takes only a couple of seconds of 'ping' before the download/upload speed measurements start, but with my new MacBook Pro (just like with iGetter) it takes up to almost a minute before the measurements start, sometimes it won't start at all and I have to re-start the test.
Well, thanks for reading. And hope you can help me shed some light into this. Because it is really preventing me from really enjoying my new MacBook Pro. And if this is most likely a hardware problem, I'd better get back to the store and try to get it replace or something while it's only been 5 days. *cheers*

Hey guys.. Thanks for the replies. Unfortunately, I bought the MacBook in Indonesia where there are no such thing as an AppleCare. The only option is to leave the Apple product to one of the 'Authorized Apple care centre' and have whoever do whatever to it without guarantee of success. As for returning it and getting a brand new one, I also don't know if there is such a deal here, but that's actually a good idea, will try to go to the store tomorrow. Although, I'm worried that the problem might be with OSX Lion or something and getting a new one won't help.
mark75090, I've tried resetting the router when I first noticed te problem, didn't work though. I've checked my new MacBook's wi-fi (option+click wifi bar) and it says 'PHY Mode: 802.11g', so does my MacBook and the old MacBook Pro. I don't know what those mean though, and I don't know whether or not my router is an N., can you tell me more please.. I have tried with the other two turned off, and only the new MacBook using the wi-fi but the problem persists. I have also tried connecting directly to the router, but as I described, the problem is too subtle for me to notice the difference.
Also, if I create a brand new Wi-Fi connection in network preferences and connect to my router through the new Wi-Fi profile, the problem seems to be gone for an hour or so, then it always comes back though. I have also just finally installed 10.7.4, but it doesn't help either.

Selection Problem with JTable

Hello,
i have a selection problem with JTable. I want to allow only single cell selection and additionally limit the selection to the first column.
I preffered the style from MS Outlook Express where you can select the email accounts to edit.
It is a table like this:
Account name |   Type |   ...
--------------|---------|---------------------
Hotmail       |   POP3 |
GMX           |   IMAP |The selection should be only avaibable at 'Hotmail' or 'GMX' - not at 'POP3', 'IMAP' or as complete row selection.
Please help me!
Thanks.
Warlock

Maybe this will helpimport java.awt.*;
import javax.swing.*;
public class Test3 extends JFrame {
public Test3() {
    setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    Container content = getContentPane();
    String[] head = {"One", "Two"};
    String[][] data = {{"R1-C1", "R1-C2"}, {"R2-C1", "R2-C2"}};
    JTable jt = new JTable(data, head);
    jt.getColumnModel().setSelectionModel(new MyTableSelectionModel());
    content.add(new JScrollPane(jt), BorderLayout.CENTER);
    jt.setCellSelectionEnabled(true);
    jt.setRowSelectionAllowed(false);
    jt.setColumnSelectionAllowed(false);
    setSize(300, 300);
    setVisible(true);
public static void main(String[] arghs) { new Test3(); }
class MyTableSelectionModel extends DefaultListSelectionModel {
public void setSelectionInterval(int index0, int index1) {
    super.setSelectionInterval(0, 0);
}

Very Strange Internet Problems

I own a MacBook Pro 15.4 Inch that I purchased about a year and a half ago. I recently upgraded to Leopard and have all the latest updates. I am from the US, and when I am home my internet works fine. However, I am on travel to Seoul, South Korea right now and am having a very strange internet problem.
As far as I can tell, the URLs that I type in to my browser are, sparodially, not translated correctly into the webpages that they are supposed to represent. This problem is probably effective 75% of the time, and the rest of the time my internet works roughly correctly. For instance, when I enter http://www.google.com, instead of being taken to the Google homepage, I am taking to the homepage of Jammin Beats DJ Service, an obscure website about a company in northern Pennsylvania. The actual URL of this website is http://www.jamminbeats.com, but when my internet is malfunctioning, 'jamminbeats' is for all intensive purposes replaced by 'google' (that is, it applies not only to the main page, but to sub pages, so "http://www.google.com/weddings" takes you to "http://www.jamminbeats.com/weddings" and etc). For most other webpages, one of two things happens. Either I am taken to the correct page but it is displayed without any images or frames (just the html text and links), or I am taken to a blank page with the header "Under Construction", which I assume is the default for a page that doesn't exist. This is why it seems as though the URLs are simply being interpretted erroneously.
This problem occurs when connecting both to the wireless and the wired internet at my hotel, and it occurs on both Safari and Firefox, so it is not a connection-specific or browser-specific problem. It may be a problem with the hotel's internet, and as of yet I have not had a chance to test the computer at another location. However, a colleague using an IBM computer has had no problems, and I am currently on a Samsung machine in the business center of the hotel and it is working correctly as well. I have searched extensively online for a similar problem but have come up empty handed, and more than anything, I am confused about what might be causing this problem. The strangest thing is that a fraction of the time, the internet functions normally, but it is usually roughly 15 minutes out of every hour, and eventually I am inevitably taken back to Jammin Beats.
I am a computer science graduate but I still have no idea what would cause this problem. At first I thought it might be a hacker, but if it is, he or she has been at it consistently for 3 days now, and only seems to be targeting my computer. Any ideas or solutions would be greatly appreciated, as I have been forced to resort to the hotel's business center for checking email, doing work, etc. Thanks in advance.

I did consider that, as I was in Beijing last week and there are a number of censored sites. However, in Korea I have had problems with very basic sites like facebook, wall street journal, google, yahoo, Korean google, my hotel's webpage, etc. Further, I have successfully gotten all of these sites to load seemingly at random, and can access them without problems on other computers. The only disconnect seems to be between my MBP and the internet, not between Korean internet and the web. I have toyed around with the network settings, and although sometimes after switching from "Automatic" to a fixed connection I get some sites to work, it usually only lasts a short time and eventually the same sites stop working. I reset my cache regularly to make sure I'm not getting sent to cached sites, but this also doesn't help. Further, my Apple Mail, Skype and AIM accounts jump between being connected and disconnected randomly as well. Again, this is isolated to my own computer, which is why I'm so confused.

Select Problem For 'Back Menus' - Zen V P

Just got the Zen V Plus and tried to set the time/date. Followed the 'guide' and after the time/date screen pressed the 'back button'. Got the Set Alarm/Date/Time (etc) menu but when I selected an option (moved joystick down to desired option then pressed the joystick) the time/date display came up and I was NOT ABLE to set the date. Same thing occurred trying to set the date (tried it several times and it worked once .... then attempted again - several times (4) but it only worked once). Turns out I have the same problem with any option in ANY 'back' menu. Suggestion?
Do I have a defecti've unit (can't be the 'operator' who is defecti've! haha)? Should I return it and try another?
Actually not that interested in playing music .... it's more for playing .wma(DRM) book files.

Latest ... updated my firmware (to ZENVPlus_PCFW_P4S_L2___0.exe) and it fixed the select problem for SET DATE/TIME etc however
the SELECT procedure doesn't always work for 'back button' menus. Example: tried to set a bookmark... following procedure in 'guide', pressed 'back button' and held it, from 'NOW PLAYING' screen - works 2 out of 5 times. Most of the time, pressing and holding takes you back to the previous menu - not to the 'back' (or in this case the SET BOOKMARK) menu. Sounds like something for the next version of firmware ... the code doesn't always set an internal timer correctly (am a programmer of 30 years ... part of that time pgmmng firmware).

Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored

Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored and updated firmware, deleted the account, anything I could think of, but it's just not accurately downloading the most recent emails.

The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.

Print selection problem

when i select a page to be print from my pc the page select in

Hello. I feel your pain and frustration with the print selection problem in safari, especially in Snow Leopard. I have spent hours trawling help pages and forums etc. BUT YEE HAA (sorry got a bit excited, but it really was hours) I found the answer. So here goes.
Click on Safari
Scroll down to services then slide to right
Scroll down to services preferences and click
Scroll down to the Text section
If you Tick the Text box it will choose all options for you. Or if you don't want all options in the Text list, then untick Text box and tick options you do want.
BUT for your print selection problem make sure you tick NEW TEXT EDIT WINDOW CONTAINING SELECTION.
Then when you want to select something in a web page you want to print (including pictures etc) then highlight it, then Right click. And low and behold, in the list is NEW TEXT EDIT WINDOW CONTAINING SELECTION. Click that, Then press cmd+p and your printing.
I really hope that helps with your problem
I can now go to sleep.

At Line selection problem

hi,
iam stuck up with AT LINE-SELECTION problem ie i designed a screen where they need month list on clicking F4. i got the month list using month_names_get in the screen but while clicking the relevant month no.it's not entering into the required parameter. i have attached the codings,
MODULE MONTH_DIS OUTPUT.
SUPPRESS DIALOG.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
SET PF-STATUS SPACE.
NEW-PAGE NO-TITLE.
WRITE:/ 'SELECT MONTH' COLOR COL_HEADING.
ULINE.
DATA: T_MNTH LIKE T247 OCCURS 12 WITH HEADER LINE.
refresh t_mnth.
CALL FUNCTION 'MONTH_NAMES_GET'
   EXPORTING
     LANGUAGE                    = SY-LANGU
IMPORTING
RETURN_CODE                 =
    TABLES
      MONTH_NAMES                 = T_MNTH
   EXCEPTIONS
     MONTH_NAMES_NOT_FOUND       = 1
     OTHERS                      = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at t_mnth.
    write:/ t_mnth-mnr, t_mnth-ltx.
endloop.
CLEAR T_MNTH-MNR.
ENDMODULE.                 " MONTH_DIS OUTPUT
AT LINE-SELECTION.
p_period = t_mnth-mnr.
CHECK NOT p_period IS INITIAL.
LEAVE TO SCREEN 0.
here in the AT LINE-SELECTION, the selected month is not coming to the required parameter.
pls help me in this issue,
Thanks in advance,
Premnath.

You need to set a "Hide" after the write... I suggest you also set your own dialog PF-STATUS too so you can have just a PF2 "pick" button and a Cancel button ( this will look better to the user).
loop at t_mnth.
write:/ t_mnth-mnr, t_mnth-ltx.
hide: t_mnth. "needs this
endloop.
clear: t_mnth.

Weird BGP path selection problem

Hi, all,
I am seeing a weird BGP path selection problem on 4948 switch running cat4500-entservicesk9-mz.122-46.SG.bin code, this switch has two uplinks to the same ISP's different edge router, one circuit is primary the other one is strict backup, only default route is accepted from ISP. I am setting both local preference and weight to the default route advertised over backup link, however neither one is taking effect, BGP still thinks the backup link is better, what could be wrong?
rtr#sh ip bgp 0.0.0.0/0
BGP routing table entry for 0.0.0.0/0, version 105
Paths: (3 available, best #2, table Default-IP-Routing-Table, not advertised to EBGP peer)
Not advertised to any peer
17675, (received & used)
    203.169.8.37 from 203.169.8.37 (61.211.160.150)
      Origin IGP, localpref 100, valid, external
      Community: 65001:0 no-export
17675
    203.169.8.45 from 203.169.8.45 (61.211.160.151)
      Origin IGP, localpref 90, weight 90, valid, external, best <====
      Community: 65001:0 no-export
17675, (received-only)
    203.169.8.45 from 203.169.8.45 (61.211.160.151)
      Origin IGP, localpref 100, valid, external
      Community: 65001:0 no-export
Thanks

Hi,
On cisco routers , weight is having highest preference to decide best path. By default for received route, weight is 0 but you are setting weight 90 to backup path and that is why it is getting preferred (higher is better). Please remove weight and let local preference be 90 (lesser than route on primary path)
--Pls dont forget to rate helpful posts--
Regards,
Akash

Certificate selection problem in Safari

Hi ,
I have certifcates A,B,C,D for the same site , whenever i use the Mozilla it is asking which one to select , but somehow i dont know why Safari is asking the same option.
It is forcing me to accept Certifcate A to that paricular site. How to solve this problem in safari.
Regards
Vikranth

Hello. I feel your pain and frustration with the print selection problem in safari, especially in Snow Leopard. I have spent hours trawling help pages and forums etc. BUT YEE HAA (sorry got a bit excited, but it really was hours) I found the answer. So here goes.
Click on Safari
Scroll down to services then slide to right
Scroll down to services preferences and click
Scroll down to the Text section
If you Tick the Text box it will choose all options for you. Or if you don't want all options in the Text list, then untick Text box and tick options you do want.
BUT for your print selection problem make sure you tick NEW TEXT EDIT WINDOW CONTAINING SELECTION.
Then when you want to select something in a web page you want to print (including pictures etc) then highlight it, then Right click. And low and behold, in the list is NEW TEXT EDIT WINDOW CONTAINING SELECTION. Click that, Then press cmd+p and your printing.
I really hope that helps with your problem
I can now go to sleep.

Strange shutdown problem

Hi,
Last night, I had a strange shutdown problem on my iMac G5 (revB, 20", 2.0 Gig), with 1 Gig RAM, running 10.4.4 with all updates. I had had the computer on most of the day, using it off and on. I shut it down, and left the room. When I came back about an hour later, the fans were running (not rapidly, just at the normal speed they run when the computer is running), but the screen was blank, and the "sleep" light was not on. The computer wouldn't respond to any moving the mouse or to keyboard input. I finally shut it down by holding the power button until the fans shut down. Upon restart, everything was normal, and after using it for a few minutes, I was able to shut it down normally. Has anyone else seen this sort of behavior, and is it normal ? Or am I about to have more problems.
Thanks in advance,
Dave Fritzinger
Honolulu, HI

Hi Dave,
By the sound of it your computer has "hung" during the shutdown process, but at a point in the process where the system's temperature control mechanisms were still operating (otherwise the fans would be running flat out). My guess in this case is that it was probably actually a finder crash.
Various things can prevent proper shutdown. Often USB or FW devices are to blame. USB adsl modems , some scanners and hubs and the occasional printer driver seem to be common causes. Software can be responsible too, though - background virus or drive checkers are probably the most common, but far from the only possible causes ( I seem to remember "SpringCleaning" causing this problem when people moved to Tiger 10.4.2 for example) .
New software or hardware are therefore the first things to look for.
If you haven't installed anything completely new then one possibility may be that something you are using is not compatible with the latest OS update, and needs an upgrade to a driver. Its also possible that this is a "one off" glitch caused by a temporary problem , but if it happens again I'd be taking careful note of anything that you were using in the previous session.
You might also want to use the Console (in Utilities folder) to look at your system and crash logs.
Cheers
Rod

Strange major problem with 975X PowerUp Intel MOBO

I’m suddenly having a strange major problem with a MSI 975X Platinum PowerUP Edition V2.1 MS-7246 Intel socket 775 motherboard. Previously, it had given me no problems at all.
It went like this:
Powered on system in the morning, booting from a cold start.
Hit DEL key to get into the BIOS.
Missed the window and the system booted into Windows normally.
Re-started the system from within Windows.
Hit DEL key to get into the BIOS and was successful the second time.
Hit the ENTER key on the first item “Standard CMOS Features”.
The DATE, TIME and other information was displayed on the next screen, but at this point, the BIOS screen became completely unresponsive to any keyboard input.
The only thing I could do at that point was to power off.
Subsequent power on boot-ups resulted in the system always freezing at the BIOS splash screen after the video card sign-on.
I have switched power supplies, hard drives, keyboards and video cards. I have disconnected everything except the video card, keyboard and one RAM module. I have switched the four RAM modules around and then reduced the RAM to one 256MB module in the proper slot. I even changed the battery on the MOBO, in case it had shorted out and removed and re-seated the BIOS chip. It still halts at the BIOS splash screen.
The BIOS chip can’t be completely dead, because I powered off and pushed the BIOS reset button on the MOBO to reset the BIOS to the factory defaults. When I re-booted, I could tell that it had actually reset to the factory defaults because I had previously set the BIOS to reboot the system on resumption of power and the factory default was to remain off until the power button was pushed, which was now the default.
I’m stumped! All I can think of is to get a new pre-programmed BIOS chip and see if that makes any difference, but I’m not sure this system is even worth the expense with no guarantee of success. Any suggestions on how I might get past the BIOS splash screen or do I for sure have a corrupt BIOS chip?

System specs as per the posting guidelines -
Board: MSI 975X Platinum PowerUP Edition V2.1 MS-7246 Intel socket 775
Bios: Version (can’t recall & can’t check since it won’t go past the BIOS splash screen)
VGA: ASUS EN7600GS nVidia GeForce 7600GS PCI-e 256MB DDR2 (also tried new XFX nVidia
Geforce 210 PCI-e 2.0 512MB DDR3)
PSU: Chiefmax 680W ATX (also tried new OCZ 700W ATX)
CPU: Intel 2.8GHz LGA-775 Core2 Duo Dual-Core Processor
MEM: 4 x Samsung 512MB 1Rx8 PC2-5300U (2GB total)
HDD: Seagate Barracuda 250GB SATA2 (also tried Seagate Barracuda 500GB SATA2)
COOLER: Intel OEM LGA 775 fan/heatsink C25897-001
OC: No
OS: Vista Home Premium 32-bit
I have been through the BIOS reset procedure several times and pretty much as outlined. As I said before, I could tell that it had taken a reset to the factory defaults, because the power on option had changed.

Wrt54g strange signal problem

I have a new wrt54g and I have a strange signal problem. When I am in the house close to the router I only have a good signal (3 bars) but when I take the notebook outside or all the way in the back bedroom I have a excellent signal (5 bars). I am thinking that something in the house might be interfereing with the signal but I have tried changing the channel and still have only 3 bars when in the house, and 6 bars when I take the notebook outside or to the back bedroom. I am using wap but I tried disabling it and still only 3 bars when around the router.
Any thoughts, and thanks in advance.

I tried it all but still the same but I did find this, when I take then computer in the back of the house or outside the signal goes up to excellent and stays there even if i take it back in the front of the house where I previously only had a good signal. But the only way to get a excellent signal is to take it far off from the router but once it does get a excellent signal it will stay there even when I take back around the router, crazy I know.
Any more advise or thoughts?

Strange connection problems -- software or hardware?

I've been experiencing some strange connectivity problems of late, and am wondering if it's a software or hardware issue. I'm running OS-X 10.4.11, and have noticed web-associated "drop-outs" occurring. When I'm browsing, any of the following will happen:
1. the pages will periodically stop loading, or will take forever to load a few final images.
2. the page will load with a different format (completely unformatted, like a throwback to Mosaic!).
3. the page won't load at all, and will instead give me either a "DNS error" message, or will default to my ISP's "We couldn't resolve your page" message.
4. Nothing out of the ordinary happens.
Throughout this process, the connection strength is 100%.
It seems this happens with both Firefox and Safari. Is this an issue with driver software, or is my Airport Card giving out? My computer is about 3 years old.

I have been having intermittent connection problems on several computers over many years now. We have 12 eMacs, all purchased within a few months of each other, all with 10.4.11. Some computers have almost perfect internet connection, but some are constantly losing connection. If the user just waits a few minutes, the network just comes back or if they open system preferences and renew the DHCP lease it comes back as well. We have tried replacing cables, reloading the operating system, repairing permissions, reseting safari... We are all connecting through ethernet cables through wall jacks then to a switch that is connected to our router. Our DSL provider claims it can't be wiring or a problem on their end or they would see it and we would all have problems. I am not super computer literate... Any suggestions for what I should check on the 4 or so computers that are having lots of connection problems?
Thanks for any words of wisdom!!!

Strange selection problem

Similar Messages

Maybe you are looking for