Strange sharing issue, # of items dont match up...

Hello all. I am currently using an iMac, Mini, and MacBook. I have the same itunes library on all 3 of them. I know this by looking at the # of items when the music tab is highlighted on any of of the libraries. The # of items is 9097. Now if I click on to any one of the shared libraries and choose to show "all items" the number increases to 9102. It does not matter which library I look at and it does not matter which mac I am using to look at it. It always changes from 9097 to 9102. If I choose to show "items not in my library" it is empty, again proving that the libraries are the same. Any idea where these 5 "ghost" items are coming from???
Thanks in advance,
Steve

I've had links to internal pages default to the top page or "one of my pages". I've had to redo them on occasion with the Hyperlink Inspector pointing the to the correct page.
I publish to MobileMe and have published the site to MMe, visited each page, copied the full ULR and used it for the hyperlink. Doing it that way has never slipped back to "one of my pages".
OT

Similar Messages

Can't access root share sometimes and some strange performance issues

Hi :)
I'm sometimes getting error 0x80070043 "The network name cannot be found" when accessing \\dc01 (the root), but can access shares via \\dc01\share.
When I get that error I also didn't get the network drive hosted on that server set via Group Policy, it fails with this error:
The user 'W:' preference item in the 'GPO Name' Group Policy Object did not apply because it failed with error code '0x80070008 Not enough storage is available to process this command.' This error was suppressed.
The client is Windows Server 2012 Remote Desktop and file server is 2012 too. On a VMware host.
Then I log off and back on, and no issues.
Maybe related and maybe where the problem is: When I have the issue above and sometimes when I don't (the network drive is added fine) I have some strange performance issues on share/network drive: Word, Excel and PDF files opens very slowly. Offices says
"Contacting \\dc01\share..." for 20-30 sec and then opens. Text files don't have that problem.
I have a DC02 server also 2012 with no issues like like this.
Any tips how to troubleshoot?

Hi,
Based on your description, you could access shares on DC via
\\dc01\share. But you couldn’t access shares via \\dc01.
Please check the
Network Path in the Properties of the shared folders at first. If the network path is
\\dc01\share, you should access the shared folder by using
\\dc01\share.
And when you configure
Drive Maps via domain group policy, you should also type the Network Path of the shared folders in the
Location edit.
About opening Office files very slow. There are some possible reasons.
File validation can slow down the opening of files.
This problem caused by the issue mentioned above.
Here are a similar thread about slow opening office files from network share
http://answers.microsoft.com/en-us/office/forum/office_2010-word/office-2010-slow-opening-files-from-network-share/d69e8942-b773-4aea-a6fc-8577def6b06a
For File Validation, please refer to the article below,
Office 2010 File Validation
http://blogs.technet.com/b/office2010/archive/2009/12/16/office-2010-file-validation.aspx
Best Regards,
Tina

Strange performance issue with 3510/3511 SAM-FS disk cache

Hi there!
I'm running a small SAM-QFS environment and have some strange performance issue on the disk storage part, which somebody here might be able to explain.
Configuration: one 3510, dual controller, RAID-5 9+1, one hot spare and one disk not configured for whatever reason. The R5 logical drive hosts a 150GB LUN for SAM-QFS metadata (mm in SAM-FS speak) and a 1TB LUN for data (mr in SAM-FS speak). Further, there are two small LUNs (2GB, 100GB) for some other purpose. Those two LUNs have nearly no I/O. All disks are SUN146G. Host connection is 2GBit, multipathing enabled and working.
Then the disk cache became too small, and the customer added a 3511 expansion unit with SUN300G disks. One logical drive is a RAID-1, 1+1, used for NetBackup catalog. The other is a RAID-5, 8+1, providing two LUNs: 260GB SAM-FS metadata (mm) and 1.999TB SAM-FS data (mr).
For SAM-FS, the LUNs form two file systems: one "residing" in the 3510, the other "residing" in the 3511 expansion. Cabling is according to the manual and checked several times by several independant people. Operating system is Solaris 10, hardware is a V880.
The problem we observe: SAM-FS I/O on LUNs on disks inside the 3510 is fine. With iostat, I see 100MB/s read and 50MB/s write at the same time. On the SAM-FS file system which is running on the two LUNs in the 3511, the limit seems to be at 40MB/s read/write. Both SAM-FS file systems are configured the same in regards of block size.
In case I have activity on both SAM-FS file systems, I see 100MB/s+ on the LUN running inside the controller shelf and another 40MB/s on the disk runnin in the 3511 expansion chassis. So, the controller is easily capable of handling 150MB/s.
Cache settings in the 3510 controller are default I think (wasn't installed by me), batteries are fine.
Is this 40MB/s we experience a limitation by the expansion shelf? Don't think so. Anybody has any ideas on this? What parameters to check or to change? Any hint appreciated. I can also provide further details if needed. Thank you.
wolfgang

SUN300G disks sound like 300GB FC disks.
Depending on how many files are in the SAMFS file system, sharing the mm and mr devices on the same RAID array can be a pretty horrible idea. In my opinion and experience, it's almost always better to NEVER put more than one LUN on a RAID array. Period. Putting more than one LUN on an array results in IO contention on that array. And large, unnaturally configured (9+1? Why?) RAID arrays will have problems from the start.
What are the block sizes used on the RAID arrays? It wouldn't surprise me to see that the RAID array on the expansion tray has a very large block size. Larger block sizes are, in general, not better. Especially for SAMFS metadata - which IIRC is something like 8k or 16k blocks.
I suspect what is happening is most of the metadata updates are going to the mm device on the new array, contending with the IO operations on the file data.
How much space is left on each mm device? What does "iostat -sndxz 2" show when you're having the IO problems?

Strange behavior when I try to match a mpeg2 video with the menu size image

hello all,
got a strange behavior when I try to match a mpeg2 video with the menu size image,
menu size is 1920 x 1080 (photoshop file)
mpeg2 video 1920 x 1080 (1second 19 frames)
the idea is to go from the menu link to the next sub menu with a video as transition, using the same image on the video as the menu and then zooming in (in my case through a door) to end up after the zoom in the next level menu.
I try to achieve a smooth change from the first play menu picture to the video image into the next level menu picture,
everything works good but when I watch it on the preview mode on the left and right side of the video it shows a black bar at least 15 to 25 pixel wide, that means the video image appears smaller and it causes a little jump what is preety disturbing and can not be sold as a professional work.
why encore treats the video size and picture differently?
it's gratful appreciated if somebody who got experience in a transition I mentioned obove posting any solution,
thankl you all

Hi all
I'm having a very similar problem with Encore. My menu items are distorting (a minor but infuriating squashing top and bottom) when previewed.
Using Encore,PS,AE CS4
DVD format SD PAL DV widescreen
I created 3 menu frameworks and 3 video transistions to link them in AE. On the final frame of each transistion in AE I saved the frame with Composition>Save Frame to> Photoshop Layers. In PS i added the button functionality and saved.
In Encore I use Dynamic link to import AE transistions as timelines and imported each PS menu twice, once as "menu" and once as an asset.
When I link the timeline transistions to the menu and preview at the point the menu begins the whole image is squashed. When the next transistion is activated the image returns to its original size.
Thinking it was the use of PS that was causing the menus to distort I used the menu asset directly in the time line. Obviously no menu functionality but also no distortion. The AE transistion flowed straight into the "menu" just as I expected.
In the properties panel the menu Aspect Ratio 16:9
The AE transistions PAR is SD PALwidescreen 1.4587.
I did try the Blu Ray suggestion above but the same distortion was apparent.
Any suggestions short of squashing the video to match the menu would be welcomed.
Thanks

My Itunes library is messed up. Wong titles. Wrong albums. Wrong everything. EX. I play a song by avenged sevenfold but then it plays a song by eminem. Song titles dont match what they play and neither does the artists name

My Itunes library is messed up. Wong titles. Wrong albums. Wrong everything. EX. I play a song by avenged sevenfold but then it plays a song by eminem. Song titles dont match what they play and neither does the artists name. Can I restart everything from itunes? I know this sounds cunfunsing, (and it is) but yeah.
Once again to try and clarify, The song(which itunes says is by artist,band,person, etc) is mixed up with another song out of my libary.
If there's something you dont get ask me!!! thanks

I'm experiencing the same issue. Not only do I get a messed up library, but since I've let iTunes handle my music files, they too have been shuffled around - placed in different album folders and sometimes given names of other songs... With quite a large library, the cleanup makes me feel a bit like Sisyfos pushing the rock uphill - it's a never ending story. Only positive side of this is that I get to play a lot of music quizzes while guessing who plays the song that is disguised as eg. Buddy from De La Soul, and then afterwards try to track down the real 'Buddy' as this has also found another folder to hide in...
Shazam has come to the rescue a few times so far...
@Apple: this is just not good enough!

[solved] Strange Audio Issue

I am experiencing a strange audio issue with my Intel-HDA ICH7:
# lspci -v
00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
Subsystem: Hewlett-Packard Company Unknown device 30a5
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at d2400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access>
when I installed Arch linux the first time a mounth ago on this computer, I had a sound problem that was solved in a very strange way.
Everything worked fine until a week or so (I believe from Alsa 1.0.12). Now sometimes sound works and sometimes it doesn't. For example sometime I boot the computer and have no sound, then I reboot it without doing anything, and then sound works.
I have tried messing with the modprobe.conf:
# /etc/modprobe.conf (for v2.6 kernels)
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.11 ---
#alias snd-card-0 snd-hda-intel
#alias sound-slot-0 snd-hda-intel
# --- END: Generated by ALSACONF, do not edit. ---
#options snd-hda-intel model=F1734
options snd-hda-intel model=z71v
options snd-hda-intel position_fix=1
but it was useless. If I put back the modules in rc.conf everything is worse: sound doesn't work at all.
A diff between lsmod in a "working boot" and a "without sound boot" showed that the same modules where in kernel memory.
A diff between dmesg showed this difference:
< hda_intel: azx_get_response timeout, switching to single_cmd mode...
was present in the not working boot. This line is absent in a working boot dmesg.
The only way to make the sound card working everytime is to remove the snd* modules load from the boot sequence and load the modules "by hand" after the login.
Any ideas?
PS : If something is unclear due to my poor English please tell my and I'll try to explain it better.

phrakture wrote:snd-hda-intel is screwed up - on my thinkpad I had to go into the bios and enable the modem for sound to work. Oddly enough, the modem was off by default.
Also, mine has no PCM listed, I need to use "front" as my PCM level... not to mention the UI is way off with 'tpb' (if you have a thinkpad)
Yes it's not an Arch Linux related problem: I had problems with Debian (Etch and Sid based distros like ubuntu) too (but there I had no modprobe issue on the init sequence. Maybe is a problem of shared IRQs, but I have to study the existing documentation as I am a newbie). The difference is that Arch is simple enought for me to try something like modprobing "by hand" in the init sequence. PCM seems to work, however the volume is very low and I have found no way to make the mic work. Under Mepis I was able to make it work only if I plugged it in windows xp and then reboot into Linux. But I can't try it with Arch as I have erased the windows partition...
I will try the new kernel, study the documentation and then report. Hoping this will be usefull to others too.

Strange Shared Drive Showing Up

Can someone help with a shared drive question/issue.
I noticed a strange shared drive showing up tonight. It's name is "getinthelooppc."
When I tried to connect gave me an error but I tried again and was able to connect with my computer password. It was just a shared drive of some kind. Then it discounted me and went away.
What could it have been? Any ideas?

are u using a wireless router to connect to the internet?if yes than try to put a password on your connection and you wont have this problem again....i had the same problem and did what i just said and worked perfectly fine

Icloud sent items dont sync

hi
icloud sent items dont sync between ipad, iphone and Mac if i send with one device it doesnt show in the other device sent items
but inbox works properly why ?

Huh...? But that's exactly the problem! I have added my iCloud account in Outlook (via the iCloud Control Panel), and there is a "Sent" folder under this account in Outlook. Should the contents of this folder not match the same folder on icloud.com / iPhone / Mail on my MacBook / etc...? Because it doesn't.
If I send an email from my iCloud account in Outlook, it does not appear in the Sent folder anywhere else and vice versa.
PS: I checked the account settings, and it is set up for IMAP.

Strange power issues

I am having some strange power issues with my six week old Macbook. The symptoms are as follows (I apologise in advance for the length of this post) :
1) If the battery charge is below 50%, and you connect the magsafe charger prior to power-on, the charge light will illuminate until the grey boot screen comes up. Then the charge light turns of completely & the Macbook boots up using battery power. If I disconnect the magsafe connector, followed by the mains and reconnect in the reverse sequence, the light turns green momentarily and then orange (as it should for charging)
2) If I start the coconutBattery application after booting into OSX, while the charge is still below 50%, the same issue occurs again with the magsafe. It appears to happen at the exact time the application queries the battery. I can get the charger working if I follow the same disconnect/mains/reconnect sequence.
3) The issues above also seems to occur when the battery updater checks the battery. The Macbook does not recognise that the charger is plugged in.
4) If the charge is above 50%, then all works as expected. The coconutBattery application does not affect the charger. The Macbook works as normal.
I have tested with a brand new magsafe & a new battery - symptoms are identical. I have noticed several other non-consistent issues - the flashing green light/orange light on the magsafe connection, unusual battery life calculations (70+ hours).
I have performed calibrations & reset the PMU and the PRAM, and have all current updates. And I have spent a large amount of time in the forums looking at similar issues without much success. I am beginning to suspect the logic board (DC chip) is at fault, however I dont relish the idea of dropping my new Macbook at my local Apple Repair centre & getting it back three weeks later with the same issue.
My current cycles (on this new battery) are at 2 with a full charge capacity of 5142 mAh.
My questions to the community are:
Does anyone have a similar experience with these types of symptoms?
Or can someone illustrate on what would cause the Macbook to believe that the magsafe was disconnected? Whatever internal system call the coconutBattery application uses to recover details from the battery appears to trigger this behavior.
I would appreciate any thoughts on this one.
Macbook Core 2 Duo - 2GB RAM Mac OS X (10.4.9)

Just another observation, based on reading some of Apple's documentation regarding the AC charger:
"If the adapter works after this 60-second "rest," you most likely have a line noise issue with your power source that will require you to reset the adapter (by repeating this moment of rest) periodically. This happens when the AC adapter's over voltage protection feature senses ground noise and then turns off the adapter."
Could a sudden draw of power required at a 50% and below charge trip this over voltage protection feature? I know the charging draw varies based on current battery level.
I have tested this in UPS protected boards with the same result.

Strange import issue .. no longer works in 2.6 or Beta 3

Strange import issue.
I use LR-2.6 everyday but have only played around with the LR-3 for a limited amount of time so the other day I decided check it out and tried to import a handful of RAW(canon) files on a SDxc-8g card via a USB card reader. I set it up to copy and convert to DNG, apply a few keywords and Metadata but when I tried it acted like it imported the first image and then froze. Card reader lights stopped blinking and just stayed on, program task bar doesn’t show any progress, not even for the first image. I then went to the folder that I was going to have the images copies to and it contained a file of the first image, but there is no indication that LR-3 even created it and it doesn’t show up in the catalog. When I tried to close out LR-3 is popped up the “in the middle of a task warning” so I just closed the program and tried it a couple more times to no avail.
So I though o well I will just open up LR-2.6 and import them from there, guess what now LR-2.6 does the exact same thing!!
I thought maybe my card reader was a POS but I was able to drag all the files to a new folder on my desktop and import them from there, nope. Tried rebooting a couple times, even opened a new catalog to test with, in both LR-2.6 and LR-3 and neither will work..
I am stumped any ideas?

Thank you for everyone's assistance
I actually figured out what the problem was, like most issues it comes back to operator error, it seem I had inadvertently chose a "rename file on import" template that I had set up to name the files based on a custom fill-in field in the Meta Data, I normally only used that template when I was exporting images that had been completely edited, so being these images were new imports that field was blank, hence it would import the first image and then do to " don't import subjected duplicates" being checked it would just stop the import process.

Grouping issue vouchers items in an invoice

Hi all
I'm developing an inventory and sales system , I have a master detail form for issue vouchers issued to customers, the master block contains the columns voch_no (issue voucher no) and the customer_no from issheads table and the detail block contains voch_no, stock_code,quantity and price colums from isslines table.
Each customer may have more than one issue voucher, and each issue voucher may have more than one item.
I have another form, the invoice form (also a master detail just like the issue voucher).
What i hope to do is when the user creates a new invoice for a specific customer, he shouldn't create the invoice items himeself, but he should select some issue vouchers that belong to that customer (better to be multi select), then the invoice items will be created automatically to get the sum(quantity) grouping a line for each item by stock_code,price.
The issue voucher numbers related to each invoice should be saved in a table for later updating.
my question is :
1-Should i create a new table that contains all the nmbers of the issue vouchers related to the invoice no ?
2- how can i handle this in forms builder ?, should i create a new form, or can i achieve this in the invoice form itself and how?
Please help

Thank you!
You're probably right, I might be talking about a feature of the sistem I'm using. Actually I'm not sure if I have access to database but probably not, I work at Xerox in Brasil and would like to know a little bit more about Oracle, with out have to ask my boss all the time. I work with record receipts of different species have lost much time trying to find repeating items on invoices. Sometimes we have interface issues, some items don't go to WIS (warehouse information system) after it registers on Oracle, so we have the physical part but it's not in the report storage
My boss once told me he would teach me a way to see items of an invoice (repeting or not) after it registers on Oracle, but he is too busy, so I'm trying to find out by myself. If it helps, the systems responsability is Oracle applications - OSPD and my security group is standart.
I'm sorry if my english is not that good I feel that my words seem a little confusing to you...
Did you understand what I mean? Hope you did, and hope you can help.
Thanks once again for your interest in helping me I really aprecciate it.
Regards,
Maria Carolina.

I have 2 apple tv's but my playlists only show on one; can I get them to show up on both? I have home sharing turned on and itunes match.

I have 2 apple tv's but my playlists only show up on one; can I get them to show up on both? I have home sharing turned on and itunes match.

If you are attempting to share to both at the same time, you can't.
Are you selecting the second AppleTV in home sharing options on the MBP. Are all devices signed in for Home Sharing with the same AppleID?
You will also find some additional things to check here: Troubleshooting Home Sharing

TS2972 Home Sharing Issue

When using Home Sharing for the first time, we enabled Home Sharing, signed in with my appleID on 3 laptops on our home network. Computer 1 could see Computer 2 and 3 which both download in a few seconds and no problem sharing music. Computer # 2 and #3 could also see both other computers and share between each other (between 2 and 3). However, even though # 2 and #3 could see computer #1, it would not load computer # 1's library, it just keeps saying "downloading "X's" libary" but it never get there, just keeps chugging along. Library # 1 is not significantly larger then the other two. Anythoughts on what might be causing this? Computer #1 and #2 are both Windows 7 machines and #3 is Windows XP.
Right after I posted this, I figured it out. Under preferences and home sharing, the box wasn't checked to share my entire library. Works fine now. SInce it was acting like it was downloading I hadn't checked that.

Hi there,
You may want to review the process for importing media using Home Sharing in iTunes 11.
iTunes 11 for Mac: Use Home Sharing to import items from another iTunes library
http://support.apple.com/kb/PH12286
Hope that helps,
Griff W.

TS2972 Home Sharing Issue - Help!

I can view the library in the left hand pane; however, when I select it will not load the music. It states "Loading "XXXXX Library" and then defaults to the music library. Can you please help!

Hi there,
You may want to review the process for importing media using Home Sharing in iTunes 11.
iTunes 11 for Mac: Use Home Sharing to import items from another iTunes library
http://support.apple.com/kb/PH12286
Hope that helps,
Griff W.

Issue connecting with iTunes Match

Hi, i've got an issue connecting with iTunes Match. Most of the time iTunes doesn't connect to iTunes Match when launching the app. I just see the cloud symbol that indicates it tries to connect. And it just keeps on going. I then have to quit iTunes and relaunch it. Type in my Apple ID password. And still nothing. But around a third or fourth time I usually get a connecting going and then listen to music
And I'm not impatient. I give it some minutes everytime while opening and browsing the iTunes Store.
And the same thing happens after Sleep Mode. It is kind of annoying. Having open and close iTunes all the time.
Is there anything I can do? Am I perhaps doing something wrong? Is anyone experiencing the same problem or issue?
Thanks.

Hi,
Yes, your music remains on you computer.
Jim

Strange sharing issue, # of items dont match up...

Similar Messages

Maybe you are looking for