Strange Software Glitch With Bluetooth

Okay, this is hardly a big deal but thought someone at apple would want to know... if I am in my car and I go to email search and begin typing in the search box, the car's bluetooth activates and thinks I am having a phone conversation. When I click out of the search box the call "hangs up." I do not use a bluetooth headset so I do not know if it has a similar effect there.
PS Apologies if someone has already posted on this subject. I did not find it when I did a search.
PPS No, I do not email when I am driving but noticed it when I was in the parking lot waiting for someone.

Got it now. Thanks for taking the time to explain. Sorry to be so dense.
Now, I do some DivX compression and most Projects are over that Duration. To date, I've never seen a problem with them, nor have I heard of any client having this issue. Though I might have missed it, especially if my Sequence looked good in PrPro and then my DVD looked good. I might have shipped the DivX with similar glitches, but would think that one client would have yelled at me, if I had the same thing. Have not done any H.264 compression yet, but will now keep an eye out.
I am assuming that you're using the DivX Corp's Pro encoder to do the compression to that CODEC. I do know that they have a couple of newer versions, than what I've got. You might want to check your version numbers against what is being offered on their site. If you're using some other program to do the compression, you might want to try the DivX Corp's encoder. That would still not explain why/how you get this in both encoding schemes though. Just thinking aloud.
Good luck, and if I run across similar, especially if there is a fix, or a workaround, I'll post to this thread.
Hunt

Similar Messages

Strange Audio Glitch With Volume Adjust

When I hit the volume keys on the keyboard to adjust the volume, there is a delay that I do not get when doing the same with my desktop system. There is also an audible click on the audio when the volume is adjusted. If I go to audio preferences and then use the same keys to adjust the volume, the click and delay goes away. When I leave audio preferences the problem is still fixed for at least awhile. Rebooting brings back the annoying click and delay and I think it comes back after awhile whether the computer is rebooted or not. I have experimented with turning the audible response to volume changes on and off and this has no effect on the problem other than the problem goes away because sound preferences have been opened to make the change and not because of what the setting is. I think the problem must have to do with the sound source being opened and closed whether the audible response is set or not. When sound preferences are opened, it's as if a different routine is being used when the volume keys are pressed and it continues to be used until that piece of code gets purged from RAM memory when it hasn't been used for awhile.
I'm just curious if anyone has this issue as well.

Ah, the ever popular "feature" explanation.
I can accept that it is a result of attempting to implement a feature but the way it is working on my machine indicates that this "feature" is poorly implemented.
Well designed computer programming anticipates users actions as best as possible and makes things work as best for the current situation. Most Apple programming is a perfect example of how to do this correctly. When I hit a key to change the volume, it's reasonable to think that there's a good chance that I will hit the key again because once might not change the volume sufficiently enough. Instead, what I get is the sound channel turning on and off for every key press, no matter how quickly I press the key. This happens even if I do not have an audible response selected. Should sound be turned on when there isn't any sound to be played? I don't think this should be necessary for changing the volume if you do not have an audible response set.
Now this is how I feel this should actually work:
Sound, when running from battery should be handled like a disk drive or a screen. If it is not used for a set amount of time then it should be turned off and turned back on only if it is needed again. Hitting the volume keys when no sound is playing might set a shorter time limit before the sound is turned off but the "on" time should be sufficiently long enough to hit a volume key again without requiring the sound to be turned off and on on each press.
Remember how I mentioned that the sound problem would go away, maybe even for days if I opened the sound preferences? This would indicate to me that under this situation, the sound is not actually being turned off after a reasonable amount of time. Under certain situations, it doesn't stay on long enough and others, it stays on too long. If I am right about it happening during sound playback, then it's really messing up by turning off and then on when it clearly doesn't need to.
I am pretty sure that I have had the issue while plugged into power and at least once while iTunes was playing. Certainly when sound is already playing this shouldn't occur. For some reason, I can't seem to get the issue to surface again, but I think that it just might take some time after rebooting sometimes for it to happen again. I will post more on this when it happens again.

GLITCH WITH IPHONE BLUETOOTH IN CAR

WHEN I'M DRIVING AND THE BLUETOOTH IN MY CAR IS ON, I ALWAYS GET AN "ECHO" EFFECT WHEN I MAKE CALLS AND CALLS COME IN. IT'S BECAUSE THE PHONE'S MICROPHONE IS CATCHING MY VOICE ON TOP OF THE BLUETOOTH MICROPHONE IN THE CAR.
THIS IS A HUGE PROBLEM WHEN I'M CONDUCTING BUSINESS AFFAIRS "ON THE GO"
THIS IS A HUGE GLITCH THAT SHOULD BE RESOLVED ASAP!!

I just bought an iPhone 3G yesterday. The activation process went very quickly.
So far the only problem is with Bluetooth. I have tried to pair my phone with a BT headset and the audio system in my car ( 2006 Infiniti M35). The phone recognizes the devices by name but will not pair with them. I've used these devices with two other Motorola phones and they worked perfectly.
From what I'm reading here the blame seems to be in the firmware.
Here's hoping they fix it quickly.

Numerous glitches with A2DP and AVRCP Bluetooth

I am seeing numerous glitches with the new BT profiles. I have two stereo headsets that support these profiles. Both show serious problem. Most are occasional. The 3G is supposed to support these profiles.
- Constant: the skip forward and back controls do not work at all, ever.
- Pause/Play did not work at first, at all, on either device. Now it seems to work.
- I get audio problems. After connecting one headset, then switching to another, I got no audio at all, although Pause/play worked!
- Another audio problem was that when the Sony BT100CX was connected, it would work fine when the screen was active, but when the screen went dark, the audio would get chopped up. In this chopped up mode, I seemed to be getting about every other quarter second of audio. This problem would go on and off as I switched the screen on and off with the top button.
Are other people seeing the problems? Is Apple aware of them (other than my calls)?

The headphone controls are not designed to work with the 3.0 update, however the controls on the screen I haven't experienced a problem with yet. I have noticed that if you have Wifi connected and bluetooth active at the same time you will get a distorted signal sound on the headphones and wifi will be weak. Also note that even with your headphones off and bluetooth in discovery mode if you switch from that to Airplane mode and try to switch back I have not been able to get a signal neither from 3g, edge or wifi, it just says searching and never finds anyting. I let it search until the battery went dead. I turned bluetooth off and switched to airplane mode and back again with no problem. If you turn wifi off and just use 3g you should be fine with using the headphones as far as sound quality and no cut offs when screen goes off.

Count of all instance software registred with add ... strange counting!

Hi all,
I run a few times this report and after wile I discover that numbers shows are not similar after I open the app link and export in excel.
For example:
In main page shows Microsoft office enterprise 2007 322 and if I enter on the app link and export in excel I found just 231 ! I've check and some situations is in all apps , and Of course, first item is far a way 3071 office sp 3 and in excel are just under
40 !

The problem is the way each query is written within the report.
Count of all instances of software registered with Add or Remove Programs – will count all titles within ARP, regardless of any duplicates on a computer.
Computers with specific software registered in Add Remove Programs – Will only list an application once, even if the computer has it listed more times with ARP.
So what can you do about it? Well you can fix either report/query to remove the duplicates or display them. It is you call what you want to do about it.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

All sorts of glitches with VW Palm Pixi Plus

Hello,
I am curious if there is something inherently wrong with my phone, or if these are glitches within WebOS itself.
I have had all sorts of glitches happen over the past month or so and some are quite an issue, especially when I really need the phone.
Some of the glitches I can remember are as follow:
1. Music player cause the phone to freeze when I clicked on a song. Had to reset
2. I attempted to open google maps many times last night, when it would say I don't have an internet connection, even though the 3G logo was in the upper right corner. I had to do a reset. This was a major issue since I really needed directions at the time.
3. All the settings and SSID name info and passphrase in the Mobile Hotspot app disappeared last night and I had to reinput it all.
4. Sometimes I notice the phone is automatically restarting. This happened manny times when I first received the phone, but VW gave me a new battery, which fixed it. This feels more like a software issue now because it does it when it is just sitting on my desk.
5. One day, I could make phone calls but I could not hear anything coming out of the speaker and later, the recipient informed me they could not hear me, even though the call connected. I tried, at the time to do a restart, which did not fix the issue. I then did a **bleep** down and removed the battery, which did not work. I did a battery swap (put the battery back in) a second time and finally the phone began working again.
6. This has happened two times now, which is actually pretty creepy. One day the phone received a called and I heard this weird mid-pitch woo sound come out of the speaker. I did not know what was making the noise when I realized what it was, my phone was trying to ring. I picked up the call and was able to talk. This also happened yesterday in one of my classes where the phone was on vibrate (the vibrate switch was on), and I was connected to the Mobile Hotspot app. Out of nowhere, I began receiving a phone call and this same eery noise came out of it. I was under the impression when using the mobile hotspot, I would not be able to receive calls. The noise was piercing and odd, and I had to hit ignore, where the caller left a voicemail. Now, when in a situation where I cannot have my phone ring, this concerns me because the phone has a mind of its own. Additionally, I do not want to turn my phone off all the time to avoid ringtones, because it takes WebOS almost 3-4 minutes to boot up on the pixi, probably because it has a slow processor.
7. There has been numerous issues with using my bluetooth headphones (A2DP). Sometimes when I connect the headphones and turn on the bluetooth on the phone, they connect fine, but I cannot hear any sound from the headphones nor the speaker on the phone. Sometimes after I have been on a call using the headphones as a bluetooth headset, when I go back to the music, I cannot play music at all on the headphones.
Overall, I feel these glitches are worth it because I think WebOS is far superiour to Android, and I think it is a great product, but these issues are starting to become an inconviense and I am not sure how to proceed. I know the phone may be under warranty, so I may need to call Palm, but I figured I would reach out here first and get a concensus of the issues to see if it is something I can resolve on my side first.
I am running the latest OS, which I think is 1.4.5, which I updated a few weeks ago. Some of the issues above happened before the update and some after.
Thank you for all your help,
Tim
Post relates to: Pixi Plus p121vzw (Verizon)

I appreciate the help.
Another issue I forgot to mention was with the email client. With my gmail account, it only shows 5-10 emails but I can keep scrolling like there is more emails. Additionally, I can actually click on the empty spaces and emails will show up. It is like the title and email info are not being shown in the preview (inbox) window. The irony is I also have a school account, which is hosted by gmail with a different domain, but all the emails show up fine. I even deleted the gmail account and re-imported it and the contacts, and the problem persists.
Regardless though, last night a new issue began. My vibrate ringer switch is malfunctioning. What is happening is when I turn on the ringer (put the switch in the off position), the switch does not fully close, where the ringer turns on for a second and then the vibrate goes back on. Even though the switch is in the up position, the switch is not closing all the way to close the circuit.
I took the case off and you can clearly see it is not catching in the lock position, or the spring is not pushing it up far enough to hold it in.
I admit, webOS is far superior than Android (I used a Droid for 6 months) but the build quality and glitches are quite a concern. I really hope they come out with some new hardware soon, because I am not sure how long I can go before I give up this pixi. I would not mind the pre, but I have read more horror stories regarding hardware. With HP now owning Palm, I am sure the hardware quality will increase and the palm universe will expand, minimizing software glitches because more users means more revenue, and more revenue means more staff programmers working on issues.
I can sort of get by webOS's shortcoming, but the hardware has to be there for me. This sucks because I am left with little options at this point (I do not want to go back to Android and who knows if the iPhone will ever come to VW, also, I am not in the mood to take on another platform as windows is in the midst of working on).
Thank you again!

Pairing BB Q10 with Bluetooth Carkit from Citroen DS 4

I've bought a Q10 and i'm having problems in pairing it with bluetooth from my car. I already went to car dealer and asked if this phone is supported by car software and the answer was affirmative.
The questions is that the pairing doesn't work properly. It will pair but functions related with phoning are not working.
Making calls or receive it is impossible. but what is more strange is that car and phone make the connection.
can anybody help?

Hello,
I'm confused. It pairs OK, but just doesn't work after pairing? Or it doesn't successfully pair? I can't quite tell from your post...
With my Z10, I know that I had strange results on a 2013 Honda BT car kit at first. It seemed to pair OK, but the car-kit menu items seemed to act oddly. But after rebooting the BB and restarting the car once or twice, things started to function normally.
Thanks and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BB Q10 with Bluetooth Carkit from Citroen DS 4

I've bought a Q10 and I'm having problems in pairing it with Bluetooth from my car. I already went to car dealer and asked if this phone is supported by car software and the answer was affirmative.
The questions is that the pairing doesn't work properly. It will pair but functions related with phoning are not working.
Making calls or receive it is impossible. But what is more strange is that car and phone make the connection.
can anybody help?

Duplicate:
http://supportforums.blackberry.com/t5/BlackBerry-Q10/pairing-BB-Q10-with-Bluetooth-Carkit-from-Citr...
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Strange software issue....

So, ive only had my 1st gen touch for about 2 months. Recently I noticed it behaving strangely when listening to music on occasion. Sometimes, if I wake the touch from the screen being off using the slider...it briefly shows the track im playing, then immediately reverts to the home screen. I have to touch the music icon to get back to the playing screen. I am not pushing the home button when this happens mind you. I push the home button to bring up the unlock screen, slide my finger across, and it goes back to the home screen. It doesnt do this everytime, only ocassionally, but it is quite irritating because sometimes it does this several times in a row. I suspected there was something wrong with my touch, but when I was at the Apple store yesterday, I got an iPhone 3G to do the same thing several times, and even showed it to one of the employees. He had never seen it before and thought it might be a software glitch. I have the updated 2.1 software running currently. I immediately updated my touch to 2.0 when I bought it, so I am not sure if it would have done this before the software update. Is anyone else having this problem? And does anyone know a fix?

I'm having somewhat of a similar problem... When i've woken my ipod the past few days, it goes to the song that I left off on, but when I press play it locks back up. When I unlock it again, it goes to the apple logo screen... and stays there for a while before rebooting.
Very frustrating when I have a good shuffle going.

755p Voice Dial with BlueTooth

I've searched all over the place for help with my quest to make my Treo 755p "Smart" phone have bluetooth voice dial capabilities. What seems to be out-of-the-box functionality for many normal phones (no "smart" in their name) is apparently difficult to achieve with the Treo 755p, and apparently with all Treos from what I've seen so far. Here's the conclusion that I'm coming to, but I just can't believe it, so I'm posting this here in the hopes the experts (that's you guys) will either correct my misunderstanding, or (hopefully not) confirm that I'm on the right track.
APPARENTLY:
Voice dial capability is not part of the Treo 755p; one has to install a 3rd party program or service to gain this functionality. There are a few good options out there, but they do cost additional money.
Voice dial programs apparently work pretty good with the wired headsets that come with the Treo package. Apparently (although I have not tested it yet) pressing the button on the side of the treo or one the wired headset can be configured to activate the voice dial software, and the user can speak into the wired headset microphone to dial by voice.
Extra digit dialing is apparently not supported by most (if any) of the software I've seen that works on the Palm platform. (This is hard to tell exactly, because some software works only for the windows platform, which I don't have.)
Bluetooth headsets configured in hands-free mode will launch the voice-dial software, but I've found that the treo does not connect the voice dial software to the bluetooth headset, so instructions are not heard through the headset and the headset microphone is ignored for voice dialing. Others have apparently had the same issue, from what I've seen posted in this forum and on other fora as well.
The only method I've heard of anyone successfully using a bluetooth headset for voice dialing with a Treo is to bypass the Treo Bluetooth Handsfree mode, purchase an extra bluetooth adapter meant to add bluetooth capabilities to non-bluetooth phones, and then pair the headset with that adapter. This adapter typically costs $10-20, but is sort of big and must clip to your phone or to your belt. This adapter plugs itself into the treo's headset jack and simulates a wired headset. Apparently this mode works well, for yet more cost and additional bulk with makes it difficult to fit the phone into standard casings and/or take the phone out to work with the PDS without unplugging it.
One such adapter is the Cardo "Node" (http://www.cardowireless.com/node/434), but you can't buy it from their website anymore so I'm looking for other options.
I've heard that Jabra also has one, but I'm not sure of the model number, price, or form-factor.
Am I on track with this? This just doesn't sound right to me. I've seen postings that users have had this issue from the earliest Treo models, so I would have thought that Palm would have addressed it by now. I've always thought of Palm as a reputable and responsive company, so I'm hoping I've missed the "silver bullet" solution. Can someone point me in the right direction?
Many thanks.
Bob Smiley
Post relates to: Treo 755p (Sprint)

I hope Palm is listening.
It was good to see others as frustrated as I am about the Treo’s glaring deficiency – kind of a support group. I kept thinking I must be wrong because I traded up from a dumb phone and couldn’t believe my new palm is incapable of Bluetooth voice dialing.
The voice dialing companies all say it’s a problem with the Treos. I have asked the people at Palm and, though they are very nice, they haven't been able to help. The people I spoke with didn’t seem to understand what I wanted and then spent a great deal of time trying to find the answer. In the end, they confirmed: you can get Bluetooth with a Treo, and you can get voice dialing with a Treo, but you can't get voice dialing over Bluetooth. They didn't know if a solution was in the works.
I am really puzzled about this problem. How hard can this be? As Bob Smiley said, you can get a Bluetooth adapter to simulate a wired headset, and any one of us could superglue it to the Treo, but why?
It seems to me that this is such a basic function that, especially with all the upgrades, they should be able to fix it easily. My impression is that no one at Palm is working on this and that no one is scheduled to work on this, but I hope I’m wrong.
Post relates to: Treo 755p (Verizon)
Post relates to: Treo 755p (Verizon)

Errors/Glitches with my brand new Equium A200 15I (incl video hardware)

Hi,
I just treated myself to a new laptop last Saturday and have thus only had it for about 3 and a half days so far but I noticed a few small things that I weren't sure were errors/faults or if they were just because its new, such as the fact that sometimes I type things with the keyboard and some of the letters don't appear on screen, which I think is probably more to do with me not typing or pressing heavily enough on the keys rather than anything else, its not happening so much now...the touch pad gets a bit sticky too and it thinks I want to scroll up and down when I want to move the cursor not scroll sometimes but I manage to get it to work, I think most laptops have glitches like this and presumably I could help fix it by calibrating the touch pad(?) I haven't had time to look into that yet though... there are a few other things though and most worryingly just this morning I got a video hardware error message, so now im a fair bit worried/suspicious that there may be a real fault with it and would like to know if this is the case, whether its something I can possibly fix (im no real expert especially with hardware but I can always try downloading and installing updates/fixes and that sort of thing if it'd fix problems).
The main thing which is worrying me most, is that this morning a message suddenly came up on screen, warning me that there had been a video hardware error, yesterday evening, which I clicked on a button I think to load more info. and I took this screen cap of it:-
http://img528.imageshack.us/img528/724/errorscreencapcw1.jpg
I thought it may help to show the actual full message rather than just trying and pasting the info., well ok to be honest I didn't notice it let you copy it to clipboard but oh well (oops lol).
I know there's a topic about a similar error but I didn't want to butt in on that discussion as I presume that should be for that persons error to be discussed, mine may be slightly different I don't know... I followed the instructions given in that discussion and checked the device manager and no hardware faults are showing up there, btw it says in the device manager, under display adapters, that its a Mobile Intel 945GM Express Chipset Family, im sure all the A200 15I laptops have the same card but I thought I'd just clarify that. Incase that wasn't the right thing to check I also checked under 'sound, video and game controllers' (as the error said it was a video hardware error) where it lists the only one as being 'Realtek High Definition Audio' and I checked the properties there, on both under properties it says that the device is working properly, with no signs of any faults...
The thing is, I had read online somewhere that there is some issue with the graphics or video cards. I'd read that they can be glitchy and sometimes break down after the one year. I'd also asked my dad about this and we checked that it was an Intel graphics card that came with this laptop, which it is, and we reckoned that Intel chips should be as reliable as any other brand really... so I didn't think that there should be a problem, though if there is I have until next September to get it fixed before the warranty expires!
What surprises or kind of worries me though, is that the error message was only presented to me this morning. It dates the error as having occured at 19:53pm... I was using it last night and infact I went to have a shower and I put the laptop screen down before I went to shower at around 7:35pm, I presumed that its ok to just close the lid and it would automatically go into hibernate mode or something similar(?) im wondering if that had something to do with it, as I 7:53pm would have been roughly when I came back and lifted the lid/screen up again to use the laptop again... I can only presume, given the time it quotes, thats what caused the fault?
It does give me the option to 'update driver software' and 'scan for hardware change' within the device manager, should I run both or either of those perhaps? is this a common glitch? should I be worried at all etc...
Any help is much appreciated, if more info. is needed then let me know and ill clarify what I can. Also in terms of whats installed, I have quite a few programs, for graphics I have an old version of Paint Shop Pro which I installed yesterday morning, it seemed to install fine, thats Paint Shop Pro 7 from Jasc, I also have some converter programs (for vid files, 3GP and stuff), AVG Virus scan, Spybot Search & Destory, DBPowerAmp, FTP Commander, Quicktime and Real Player, fairly basic stuff like that, nothing much else just my old pics and vid files I transferred from my old XP laptop to this one, in my documents... I don't have any high powered or complicated games or anything else like that installed. Also at the time the video hardware error message states, all that was running when I had the lid down (or before I put the lid down) would have been Windows Live Messenger (though im pretty sure I signed out before putting the lid down) and an IE window, im pretty sure thats all, I wasn't working on anything else just checking the 'net...
There are some other things I've noticed too that I thought perhaps I should mention(?), one thing I've noticed it doing is the screen going blank and then coming back very quickly, alot. I've already asked about this a day or so ago as by then I realised that it was only doing that before loading the 'Windows needs your permission to continue' window/message, which apparently its supposed to do and is something to do with the computer switching from displaying the normal desktop to the secure desktop, which I sort of understand lol.
So I believe that isn't anything to worry about but I have noticed over the lastday or so, that the screen seems to do this more, going blank then coming back again, even when that permission message doesn't show up.
For instance this morning when I first put it on and went to check my home page, I clicked on a link at the bottom of the page or wherever to load another page within the website and the screen went blank for a moment before coming back a second later with the requested page. Is this normal too? or a Vista related glitch, or is there a possibility there may be a glitch with the monitor? im guessing it may be more of a Vista thing but I thought I'd ask here just incase, I decided not to pay for any extra insurance/extended warranty as I'm very careful with my items and take good care of them and so I'm being careful to try and spot any faults early on while they may be fixable under the basic warranty and what-not...
Another thing I've noticed is that to start with, when I pressed and held the 'FN' button, a range of black and white icons appeared on screen which told me which F button(s) to use to make certain adjustments, it still does that when I try it now but at other times, it doesn't show the icons, no matter how long I hold the 'FN' button down. That doesn't really matter since I can tell from the symbols on the keys on the keyboard which buttons to press but its just inconsistent, is there a reason why sometimes the row of icons on screen will show up when I press and hold the 'FN' button and other times it won't show at all?
Also sometimes if I move the cursor right to the top of the screen, those icons load as they seem to always be located at the very top of the screen but sometimes this is a problem, if im trying to click on something else and one of those icons comes up instead... im sure you can switch this option off somehow but should I be worried that the icons don't always show when I press and hold the right button(?) just trying to be cautious!
I think this post is long enough and I can't think what else I could possibly add to help, so I'll leave this here. I don't mean to seem too paranoid but thought it best to mention this stuff incase anyone recognises these glitches/errors and can recommend a quick way to fix any problems before they may develop into anything worse... many thanks in advance for any help with any of these issues!!
(mods let me know if im wrong to include so many things in one topic, I kind of did this quickly and I apologise if im breaking any rules I don't mean to, if possible please break this into a few different topics or I can do this, though ill be at work frm 2-9pm today so might not be back and able to check here until Thursday morning (October 4th))

Hi Isla
Your message is really, very, very long. I think its too long to read it twice ;)
. Regarding all your issues on this notebook well. it looks like you have installed many 3rd party programs and applications. In such case its not easy to say if such issues are software or hardware related. But I presume its software.
I checked your screenshot pic but I have never seen such error message. But it looks like something wrong with the graphic card driver. The message says something about Live Kernel Event
A kernel's services are requested by other parts of the operating system like graphic card driver for example.
In such case I would recommend updating the graphic driver. According to you message its a Intel GPU. So you could check the Intel page for the compatible graphic chip driver.
Regarding the FN key issue;
The Toshiba FlashCard utility controls the FN key functionality. I have read in this forum that this application does not run smoothly and in some cases it causes some issues. The new update should solve the problems. You should check the Toshiba driver page. The FlashCard Utility is a part of the Toshiba Value added package.
So finally one more hint:
You should always check for the Vista updates on the Microsoft page. This OS is not perfected and Microsoft releases very often patches and fixes
Hope it could helps a little bit.
If necessary just ask for more info :)
Regards

PC Suite stops working with Bluetooth after Laptop...

I use PC Suite and Bluetooth to connect to my Phone. I use the Synchronise, and the Messages feature a great deal. It all works great after a reboot, and I think it's a real credit to Nokia that they provide this free and improve their standing compared to other manufacturers.
However, the latest versions of PC Suite have taken a backward step in hardware compatibility. Previously, no matter what state my laptop was in - ie rebooted, returned from hibernate or standby, the laptop would connect to my phone over Bluetooth, and synchronizing would happen. When my phone went out of range, the connection would drop, and when it came back into range, the connection would re-establish and synchronizing would start again - wonderful!
Now, this only works after clean reboot, and after I have manually clicked on "Get Connected". After my laptop returns from standby, if I try "Get Connected" I get the error:
"Cannot use the connection type. Check that all the needed hardware, software and drivers are available. (Code: OpenMedia)"
To get PC Suite working with Bluetooth after returning from standby I run a Repair, after which it works beautifully.
Is this a known fault? I have uninstalled and re-installed PC Suite and the BT Stack as recommended in other posts to solve other issues. My configuration is:
Operating system: Microsoft Windows XP
Nokia PC Suite: Version 6.82.22.0
Bluetooth Stack for Windows by Toshiba v4.00.23(D) SP2
Bluetooth Specification: Version 2.0, 1.2, 1.1
Many thanks...

Thanks for your response Miksu. You have pointed me to the right place. It is the connection manager that fails to recognise the BT stack that causes my problems. This is always resolved by a repair. It seems that the order of initiation is very important which may be why Luist has started to have the problem.
In my experience, once things stop to work, I've had to strip out any subsequent installs.
My PCSuite also stopped working after it installed cable connection manager (or something like that) without me asking. I found it in Control Panel->Add/Remove programs. I removed it and PC Suite started to work again, so I completely removed PC Suite then re-installed, and allowed it to add the relevant devices relating to my phone (about 4 devices alltogether) but alas this did not solve my "return from standby" issue. I think I need to remove PC Suite and then Bluetooth, and maybe something else before re-installing - I'll leave that for a rainy day.
Thanks again Miksu

Need the opinion of experts: N85 with Bluetooth pr...

Really need the opinion of experts on this one.
My N85 was swapped after the complaint that the Music Library Menu opened automatically after pairing with bluetooth of the car (permanent failure). Another complaint was that video recording was defective (intermittent failure). Also, Nokia detected great consumption of battery.
My question is: the swap came back the same relating to the bluetooth problem.. Is this a case of bad repair or a case of low knowledge...? I'm wondering if the Music Library Menu is to open when pairing with car bluetooth (strangely)....

The Dell Precision 380 has 3 PCIe slots: a x16 (for video cards), a x1,
and a x4. I'm sure there are other PCs on the market with
multiple PCIe slots.
Alternatively, the PCIe-8362 has TWO cabled PCI Express links. So
you only need one slot in your host PC. This may not be the best
solution, however, if bandwidth is your primary concern. With one
8362 connected to two chassis, the total maximum throughput is 160
MB/s. With two 8361s (each connected to a different chassis), the
total maximum throughput is 220 MB/s (110 MB/s on each).
Finally, keep in mind that the PXI chassis in your system are still
running at PCI speeds (132 MB/s). Plus, this bandwidth is shared
across all devices in the system. So the MXI Express connection
to the chassis may not be the bottleneck in the system.
Good luck!

Forum Glitch with copy and paste

So I've discovered a glitch with the forums that I'm not sure if anyone else is experiencing...
If you copy anything from the posting window while creating a new discussion or if you paste anything into this window, it causes a message to be displayed saying "are you sure you want to navigate away from this page? Your content will not be saved." when you press the Post Message button.
I have a habit of hitting select all and copy when I'm making posts just incase anything goes wrong. If I do that on these forums, I cannot post and loose all of my info.
If I try to paste in a link from the clipboard, the same thing happens.
I thought this is something quite serious that I should bring to everyone's attention.
This happens in both IE 8 and Firefox 3.5.7

function(){return A.apply(null,[this].concat($A(arguments)))}
John Joslin wrote:
TorQue[MoD] wrote:
Also, where's the Logout button?
Top of the page.
Not always. The one at th
e right of this page is always there
, and works:
http://forums.adobe.com/index.jspa
Extra linefeeds kindly provided by the software.

Strange graphical glitch on 55TL515

I'm getting a strange graphical glitch occasionally on my 55TL515. When the glitch appears, it will reoccur every 20 seconds or so. I've discovered one way to make this disappear temporarily, but I'd like a permanent fix. Let me describe my living room setup for a second...
I currently have the TV connected by itself to one outlet. The second socket is currently empty.
In another outlet, I have a filled power bar plugged in. The power bar contains my stereo, xbox, pc, macbook, external hdd, and router.
When the glitch appears, if I unplug this power bar and reconnect it, the glitch disappears. I don't understand why this is. They aren't even in the same outlet (they used to be, until i started messing around with this problem). I've tested different HDMI cords, all of the HDMI inputs, and have seen this glitch when using both my pc and my xbox on this tv.
Can anyone provide a possible solution to this? I don't want to keep everything unplugged as I use them all frequently. Could it be the power bar? Is it actually a problem with the tv? Please take a look at this youtube video and see what you think. Thanks.
http://www.youtube.com/watch?v=ehR4cALs8co&feature=youtu.be

I get the same issue...typically this happens if I connect my laptop through a VGA cable. I've tried everything from changing my video card settings(resolution, refresh rate, etc...) but I get the same exact graphical glitch. Any luck on figuring this out?
Also, do you ever get thin lines that roll/move up the screen? I would get those occasionally and it had something to do with the digital switching inside the laptop power supply(the laptop power supply was on the same outlet) and was causing this problem so moving it to another power outlet or circuit breaker helped, but I still get the graphical glitch you have.

Strange Software Glitch With Bluetooth

Similar Messages

Maybe you are looking for