Strange sorting with Soundtracks and Compilations

Hi,
currently I am cleaning my iTunes library. I am going step by step sorted by artist in the left pane . For Example I am now with Louis Armstrong and found a title from a sondtrack that is a compilation as well.
But there are lot of other albums found under Louis Armstromg that are compilations and / ore soundtracks as well. I have cecked the tags of the other albums, there is now Louis Armstron to find. Even if I try anothe genre as "soundtrack" or uncheck the compilation checkbox these albums are still under Louis Armstrong....
Any ideas?
Thank you
Oliver

Hi Emmanuel,
thank you, but unfortunately this did not help
Oliver

Similar Messages

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

Strange problem with DatagramSocket and DatagramPacket.

Hi!
I got a strange problem with UDP sockets:
Client (hardware device) send binary data messages, consisting of bytes and shorts fields (8 and 16 bits). But when I tried to read byte array, received from socket, I got some type anomaly. For example:
byte[] buffer = new byte[1024];
DatagramPacket packet = new DatagramPacket(buffer, 1024);
socket.receive(packet);
byte[] data = packet.getData();
System.out.println("Received data:");
for (int i = 0; i < packet.getLength(); i++) {
System.out.printf("%h:", data);
I got such thing: 34:4:fffffff1:ffffffdb:ffffffdc:20:1:1:0:2:50
If I try to parse it using ByteArrayInputStream and DataInputStream
ByteArrayInputStream is = new ByteArrayInputStream(packet.getData());
DataInputStream dis = new DataInputStream(is);
int head = dis.readByte();
int recvinfo = dis.readByte();
short count = (short)dis.readShort();
System.err.printf("Decoded:\n head: %h\n recvinfo: %h\n count: %h\n",
head, recvinfo, count);i got following:
Decoded:
head: 34
recvinfo: 4
count: fffff1db
So I get Integer entries in byte?! array. I also got Integer even I try to read and cast it as short in short!!! variable.
Please help!
P.S. Sorry for my bad English.

Rather fortunate that it auto-casts(or rather, that 0xFF is int by default, rather than attempting any type-detection as most languages do), as otherwise the brackets would have been in the wrong place. If it was still a byte after the "& 0xFF", sign extension would still occur.
For the sake of the less bit-literate reading this thread, it should be explained that the reason for this was large bytes being interpreted as negative numbers, which translate to negative int, which in hexa become very large ints. That's about as verbose as I can be about this without writing the equivalent of a wikipedia entry about 2s complement.

Debugging servers with gdb and compiled with gcc

I have trouble debugging my servers on Solaris.
Setup: Solaris 8 (2.8?)
[user@ ~]$ gcc -v
Reading specs from /usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.2.3/specs
Configured with: ../configure disable-nls with-as=/usr/ccs/bin/as --with-
ld=/usr/ccs/bin/ld
Thread model: posix
gcc version 3.2.3
[ ~]$ gdb -v
GNU gdb 5.0
Copyright 2000 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "sparc-sun-solaris2.8".
I can run the server, debug and step through the code, inspecting variables. But when i
type "cont" to continue and let the server finish, what heppens is:
The server finishes (bec i get my result back to the client)
GDB hangs saying "Continue" and i wont get the GDB-promt back.
I have to kill the gdb from the unixprompt
Question: Has anyone tried to run and debug tuxedo servers using gcc and gdb?
any input is of value even if someone has had success on linux with gcc and gdb.
My guess is that it has to do with the threading of gdb and tuxedo that will not match.
Mats Gårdstad Friberg
Datarutin AB Sweden

options=('debug' 'staticlibs')
these are the options i have set in the PKGBUILD, i might try giving CFLAGS directly, but compiling libc on this old dualcore takes quite a bit of time unfortunately

LOV sorting with upper and lower case

In a dynamic table, I have the following values:
aaxyz
ABC
Abd
ACE
Adf
AEG
But when I create the LOV, it sorts
ABC
ACE
AEG
Abd
Adf
aaxyz
Is there any way to sort a LOV as if case does doesn't matter?

Except the values in the dynamic table are sometimes acronyms which should be upper case and sometimes not.
For example:
eDiscovery
False Alarm
FBI
Federal Department
where the list sorts:
FBI
False Alarm
Federal Department
eDiscovery
The issue is that the list of values is large (over 100 items) and sometimes the item the user is interested in is sorted below all the initial upper case letter (in the case of the eDiscovery element). It needs to sort with the "E" but not be upper case.
Thanx!

Strange issue with imap and a blank empty sent messages folder

So here is a weird one. I got a new computer last week, Mac mini core duo. Set everything up, synced my .Mac and it set up mail. I have been using mail, i try to view Sent Messages for one of my IMAP accounts which should have 10,200 messsages in it. I see nothing. On rebuild mailbox it goes blank. Some messages I send are stored until i rebuild mailbox and it again is empty. On my other Macs (powerbook 12" and dual G4) I am still able to view and manipulate this same accounts Sent Messages. One webmail everything still works as well. While trying to copy old messages down to the Powerbook to archive them I noticed that it was very slow, and messages which were not cached already caused the Copy to fail. I am using Courier IMAP with Maildirs and Postfix on FreeBSD as a server.

my IMAP server uses INBOX as its root.. hence that folder only contains...
INBOX.imapmbox
INBOX
However one level down in INBOX I have...
DeSmit.imapmbox
HealthCareSource HR.imapmbox
SimTech.imapmbox
Lange International.imapmbox
Sandhill Photography.imapmbox
Sales People.imapmbox
Hosting.imapmbox
Marwan.imapmbox
Lucidics.imapmbox
Jeorgea Beck.imapmbox
Web Marketing.imapmbox
Sent.imapmbox
SEBA.imapmbox
Merchant Accounts.imapmbox
The Hired Pens.imapmbox
Kuhl Therapy.imapmbox
Keen Films.imapmbox
PeopleVision.imapmbox
Competition.imapmbox
East Street Woodworking.imapmbox
Cambium Learning.imapmbox
Legal.imapmbox
LFCG.imapmbox
Mailing Lists.imapmbox
Drafts.imapmbox
Ipswitch.imapmbox
Prism Scienceworks.imapmbox
Printers.imapmbox
Mindspark7.imapmbox
Air Media.imapmbox
Demios.imapmbox
Cabem.imapmbox
LexiPixel.imapmbox
Apple.imapmbox
Regent Theatre.imapmbox
Proun Design.imapmbox
Prospects.imapmbox
Goodwin PR.imapmbox
Xplana.imapmbox
Competitive Analysis.imapmbox
Banimon.imapmbox
Zaid.imapmbox
Stay In Touch.imapmbox
Junk.imapmbox
UI Research.imapmbox
Faxes.imapmbox
Dewey Nichols.imapmbox
StrideRite.imapmbox
Future Works.imapmbox
Franklin Cafe.imapmbox
Epsilon.imapmbox
CitySoft.imapmbox
Bearak.imapmbox
Pridgeon Design.imapmbox
BDS.imapmbox
Highland MBP.imapmbox
Create TV.imapmbox
Crystal Clean.imapmbox
Longs Jewelers.imapmbox
Lollipop.imapmbox
AFT.imapmbox
Wholen.imapmbox
Peppercoin.imapmbox
RocketShop.imapmbox
Rocket North.imapmbox
Barrister Books.imapmbox
Venture Capital Fund of NE.imapmbox
bodygard.imapmbox
Blakely Project.imapmbox
Comm Promo.imapmbox
Judith Aronson.imapmbox
Vendors.imapmbox
Trash.imapmbox
Accounts.imapmbox
Agena.imapmbox
Manifesto.imapmbox
Portfolios.imapmbox
Progressive Roofing.imapmbox
Process & Deliverables.imapmbox
Advertising.imapmbox
Chris Zikakis.imapmbox
Mojo Marketing.imapmbox
Lauer Learning.imapmbox
NOME.imapmbox
Nantucket Kneepants.imapmbox
NEMO.imapmbox
Nickelsen Partners.imapmbox
Essential.imapmbox
Lawler Kang.imapmbox
Accounting.imapmbox
Compuworks.imapmbox
Inside of Sent.imapbox we have...
Messages
Info.plist
And inside of Messages are the 2 messages I sent today after testing another rebuild command...
29601.emlx
29193.emlx

I'm new to working with soundtrack and final cut simultaneously?

I have to edit a documentary in the coming week for a project. I want to use soundtrack pro alongside final cut pro. Could someone put simply the process of the two working together? for audio connected to video clips in final cut, is the only way to automate these with final cut?
using the "send to soundtrack" in final cut, only exports the video so it leaves me only being able to enhance the project by adding new sounds. is it possible to edit the sound files in final cut by using soundtrack pro?
without exporting every sound individually and re-importing...thank you. im new to this so that might be a stupid question. i apologise if so

1. Finish your project in Final Cut with rough sound. Lock your picture.
2. Select your sequence, and "Send to" Soundtrack Pro as a multitrack project.
3. Finish your audio.
4. Export whichever splits you want from Soundtrack as AIFFs. You can export the whole mixed soundtrack, or vox and mix minus, or whatever you prefer.
5. Duplicate your finished sequence in Final Cut. Delete all audio. Import your finished mix(es) into Final Cut, and overwrite-edit them into the timeline.
6. Export your finished movie.
Soundtrack Pro and Final Cut Pro really aren't meant to be used together, per se. Rather, the workflow goes from Final Cut as a multitrack project and then back to Final Cut as AIFFs.

Strange behavior with Premiere and effects in CS6

Hello
I created a PS file with several layers of a subject for a TV show idea i am preparing for a presintation but every time a render my effects are not as i see them., speciffialy the 8-16 point Garbage mattes and keying.
The PS files where dragged and dropped into Premiere and as Sequences to maintin them in folders and in a Nested Sequence.,
Then i sort of sequences masked PS layers, using Ultra key to punch out the greene screen, 8/16 point Gabrage mattes to take out any other noise or background images un wanted, MOJO to warm up the subject i then placed the sequence as a NESTED sequence in my time line, but when i would render the Garbage Mattes, keying and all would be partially showing a previous tweek, but when i open the nested Sequence i would not see these errors or older tweeks, yet in the main Sequence aka composition i would see them yet when i would place the mouse over the time line to select an area for the position to play they would go away again,
sounds like a bug?
OSX10.7.4
imac i7 12GB
8TB RAID
CS6 Suite
Message was edited by: Andrew Yoole
This message was relocated from the After Effects Forum.

There must be bugs in the Zoom effect code -- I changed the
Zoom to Resize in the above code, and it works perfectly. Of
course, Resize is not as nice as Zoom because you can't set the
resize to be around the center of the image, but at least it works.
Does anyone know about bugs in the Zoom effect?

Strange problem with Outlets and Collection View Items

This is a strange issue. I am using XCode 3.2.2 and I am building a Collection View. To do this I have a non-document based application that uses Core Data.
*Collection View Item Class*
I created a new class that inherits NSCollectionViewItem and built it to have an outlet to the Label.
*Collection View Item NIB*
I created a Empty NIB for my Collection View Item. To the NIB I added a Custom View object and set the Class Identity to NSBox. I then added a Label to the new NSBox. I changed the File Owner to the new class and connected the "view" outlet to the new NSBox and the Label to the label outlet.
*Main Menu NIB*
I added a new NSCollectionViewItem object to the Main Menu NIB and set the Class Identity to the new class mentioned above. I then set the NIB Name to the name of the NIB mentioned above. In the window I added a NSCollectionView then set its Item Prototype to the new NSCollectionViewItem object I just configured. This is the typical way to set up a collection view with its item in a different NIB.
*Back to the problem*
Everything seem to work well except that in the setRepresentativeObject in the Collection View Item class when it attempts to set the Label to a value. Nothing happens. When I check closely I find that the Label is coming back nil. It is properly linked. I deleted everything and rebuilt the collection view item and relinked everything without success.
*How I made it work but not happy with it*
I have finally made this work by simply putting the line "[self view];" just before I attempt to run "[label setStringValue:name];". If I remark out the "[self view];" the label returns nil. I have a note near the line to make it easier to spot. It seems that I should not need to access the superclass's "view" accessor just to access one of view's subviews. Is this a bug or have I written this wrong?
The Collection View Item code is below. Any help is appreciated.
Thanks,
Rob
#import <Cocoa/Cocoa.h>
#import "PersonManagedObject.h"
@interface PersonSelectionViewItem : NSCollectionViewItem {
NSTextField *label;
#pragma mark Finalizers
- (void)dealloc;
#pragma mark Outlets
@property (nonatomic, assign) IBOutlet NSTextField *label;
#pragma mark Instance Methods
- (void)configureKeyValueObserving;
- (void)removeKeyValueObserving;
#pragma mark Overrides
- (void)setRepresentedObject:(id)representedObject;
- (void)observeValueForKeyPath:(NSString *)keyPath ofObject:(id)object change:(NSDictionary *)change context:(void *)context;
@end
#import "PersonSelectionViewItem.h"
@implementation PersonSelectionViewItem
#pragma mark Finalizers
- (void)dealloc{
[self removeKeyValueObserving];
[super dealloc];
#pragma mark Outlets
@synthesize name;
#pragma mark Instance Methods
- (void)configureKeyValueObserving{
PersonManagedObject *person = (PersonManagedObject *)[self representedObject];
[person addObserver:self forKeyPath:@"lastNameFirstName" options:0 context:NULL];
- (void)removeKeyValueObserving{
PersonManagedObject *person = (PersonManagedObject *)[self representedObject];
[person removeObserver:self forKeyPath:@"lastNameFirstName"];
#pragma mark Overrides
- (void)setRepresentedObject:(id)representedObject{
[super setRepresentedObject:representedObject];
NSString *personName = (NSString *)[representedObject valueForKey:@"lastNameFirstName"];
[self view]; //<---Without this line the "label" variable 2 lines down will be nil.
if (personName) {
[label setStringValue:personName];
[self configureKeyValueObserving];
- (void)observeValueForKeyPath:(NSString *)keyPath ofObject:(id)object change:(NSDictionary *)change context:(void *)context{
if ([keyPath isEqualToString:@"lastNameFirstName"]) {
[[self label]setStringValue:[object valueForKey:@"lastNameFirstName"]];
} else {
[super observeValueForKeyPath:keyPath ofObject:object change:change context:context];
@end

I think you must be correct. I just ran into the problem again in yet another NIB. It was in the setRepresentedObject method. I simply put in the same line "\[self view\]" just before I needed to set the value of the view component and it worked again. If it is the same in other components I guess I just need to pay attention to it. Thanks for the information.
Message was edited by: Cycles4Fun

Pivot table sorting with month_id and average column in BI publisher temp

In my project we are using the Oracle BI analysis for creating reports in BI publisher.
At first we are creating the report in OBIEE answers then using it as data model in BI Pub.
My reporting table holds data like below:
Month_Name Year Month_Id Compensation Emp ID
JAN 2011 1000 50 1234
FEB 2011 1001 60 1235
We need to show the data in pivot format i.e period(concated month+year) in column and comepsation values as measure and emp id in rows.I also need to show percentage i.e sum(Compensation/no of selected of periods).
For average in OBIEE pivot i have create one calulated item. But I can't sort the data(for periods with the month_id) as its spillting the average column also.
How can i sort it? like JAN2011 FEB2011 MAR2011 in pivot
also in BI pub this calculated item not showing correct value.
Please help.

Hi,
You can achieve this requirement by sort order column based on the month number and year you can sort this criteria column.also by using time_key,if the time_key is in sequence.
mark if helpful/correct...
thanks,
prassu

Strange behavior with Zoom and Image control

HELP - I have a strange behavior (bug?) with using Zoom
effect on an Image that has been placed on a Canvas. I am using
dynamically instantiated images which are placed on a canvas inside
a panel. I then assign a Zoom IN and Zoom Out behavior to the
image, triggered by ROLL_OVER and ROLL_OUT effect triggers. THE BUG
is that the image jumps around on the Zoom OUT and lands on a
random place on the canvas instead of coming back to the original
spot. This is especially true if the mouse goes in and out of the
image very quickly. HELP -- what am I doing wrong? Computer = Mac
OS X 10.4.9 Flex 2.0.1
Here's a simple demo of the bug -- be sure to move the mouse
in and out rapidly:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" creationComplete="setUp();">
<mx:Script><![CDATA[
import mx.events.EffectEvent;
import mx.effects.Fade;
import mx.effects.Zoom;
import mx.rpc.events.ResultEvent;
import flash.display.Sprite;
import mx.core.UIComponent;
import mx.controls.Image;
private var zoomIn:Zoom;
private var zoomOut:Zoom;
private function setUp():void {
var image:Image = new Image();
image.id = "album_1_1";
image.x = 200;
image.y = 200;
image.width = 64;
image.height = 64;
image.source = "
http://s3.amazonaws.com/davidmccallie/album-128.jpg";
image.addEventListener(MouseEvent.ROLL_OVER, doZoom);
image.addEventListener(MouseEvent.ROLL_OUT, doZoom);
myCanvas.addChild(image);
zoomIn = new Zoom();
zoomIn.zoomHeightTo = 2.0;
zoomIn.zoomWidthTo = 2.0;
zoomIn.captureRollEvents = true;
zoomIn.suspendBackgroundProcessing = true;
zoomOut = new Zoom();
zoomOut.zoomHeightTo = 1.0;
zoomOut.zoomWidthTo = 1.0;
zoomOut.captureRollEvents = true;
zoomOut.suspendBackgroundProcessing = true;
private function doZoom(event:MouseEvent):void {
var image:Image = Image(event.currentTarget);
if (event.type == MouseEvent.ROLL_OVER) {
zoomIn.target = event.currentTarget;
zoomIn.play();
} else if (event.type == MouseEvent.ROLL_OUT) {
zoomOut.target = event.currentTarget;
zoomOut.play();
]]>
</mx:Script>
<mx:Panel width="100%" height="100%"
layout="absolute">
<mx:Canvas id="myCanvas" width="100%" height="100%">
</mx:Canvas>
</mx:Panel>
</mx:Application>

There must be bugs in the Zoom effect code -- I changed the
Zoom to Resize in the above code, and it works perfectly. Of
course, Resize is not as nice as Zoom because you can't set the
resize to be around the center of the image, but at least it works.
Does anyone know about bugs in the Zoom effect?

Strange happenings with text and links

I am not very tech savy so be gentle. I have a blog on iweb. Today I posted and there is something going awry with my text. In a certain part it is hazy and stretched when you mouse over it the mouse pointer turns to a link. Very strange as I didn't place a link there.
Also, as a side note, I was wondering how I would make my blog more noticed? Is there a way to make it search engine friendly, or are there any boards I can post it on?
if it would be helpful here is a link to the blog:
http://web.mac.com/hottee295/iWeb/Site%202/Blog/E4A931A9-D343-4CE2-9259-1F759532 5E09.html

Are you sure you didn't make a hyperlink there? The link goes to...
http://www.sewneau.com/how.to/flat.felled.seam.html
...which seems in keeping with the subject matter of your site.
Anyways, look again in iWeb and make sure you did not inadvertantly put a hyperlink for the involved text. Otherwise, this stretched out text is usually indicative of a corruption of your link image. It's nothing to worry about as it is easily remedied by a "Publish All to .Mac" command.
As far as getting your site indexed, you are doing the right thing by posting your URL here. It's a step in the right direction. Give it some time. You can also submit your iWeb URL here...
http://www.google.com/addurl
Just submit: http://web.mac.com/hottee295/iWeb/
That should be sufficient.

Problem with package and compile

I am new to Java. I am currently using Java in developing a simple system. However, my system need to import other external classes.
The main problem is i dont know how to compile this file when they are in separate folder (i am using windows). Let say the main .java is in one folder and other external .java in other folders. I knew this can be done with the use of package. the problem is when i try to compile, there is a problem.
I used to refer from the below link for many times, but still cannot get it.
http://java.sun.com/j2se/1.3/docs/tooldocs/win32/javac.html
can anyone provide me the most simple way of:
1. import from external classes into my main system
e.g: import com.jrefinery.report.Element;
2. how to compile all .java from different directory
3. after i compile, i need the .class files place in other directory
advanced thanks to those who able to provide help.
Sosan

can anyone provide me the most simple way of:
1. import from external classes into my main system
e.g: import com.jrefinery.report.Element;You can use the -classpath option with javac, specifying the path of your external classes.
javac -classpath C:/classes D:/classes
2. how to compile all .java from different directoryYou simply indicate the path of the different sources files one after the other, like that :
However, you really should put all your source files in the same package unsig the package instruction. All files that belong to the same package must reside in the same directory indicated by the package name. Look up some doc about the package instruction.
javac -classpath C:/classes D:/classes C:/source/myclass.java D:/source/myClass.javaYou should put all the source files in 1 directory an compile using the * wildcard by :
"javac C:/sources/*.java" for example
3. after i compile, i need the .class files place in
other directoryuse -d option with javac to specify the output directory :
javac -classpath C:/classes D:/classes -d C:/outputdir C:/source/myclass.java D:/source/myClass.javaTo simplify things, put all source files in the same directory and put a copy of each external package you use in this directory. So you won't have to use classpath.
I also suggest you write a .bat file to do all the operations at once, and stick with it so that each time you change something in the sources you won't have to go through all the steps.
Beware, because path issues in java can be very tricky.

Very strange bug with AIR and native process (Windows 7, EXE)

Hello to everyone!
The situation is:
I've made an AIR Application, inside of that is running a native process - EXE file.
I'm using Flash CC as IDE and tried to use compile that as EXE with AIR 2.6 and 3.6 - results are same.
So I've insert inside a checking if Native Process is supported or not and the Native process is supported all the time.
When I've just installed the application and run it - the very first attempt is good - everything is working as a must: internal EXE is called by my Application with necessary parameters as many time as I'm need.
However if I'll close the App and then will run it again - internal EXE is not starting at all, doesn't depends on number of attempts to re-start of the App.
So only way is to uninstall, install it back and then you'll be one more session of successful internal EXE-requests, till the next re-start of the App.
That's it.
I've tried to "google it" but unsuccessful. Probably the bug is very rare.
Help me please?
Update: at compilation with Flash CC IDE it's working all the time with no any issues.
Update-2: when I'm running installator-EXE, there is going a notification "Same version is installed, etc." and then selected "Run Now" - there is also working with no problems.

Well, I've found the solution and answer by myself and here is it please:
In case with same situation as above you need to add just one line in your AS3-code
nativeProcessStartupInfo.workingDirectory = File.applicationDirectory;
And you will be happy so much

SOLVE strange problem with suspend and resume with gnome-power-manager

I have pm-utils and gnome installed.
Suspending and hibernation works well from the command line ($ pm-hibernate and $ pm-suspend). Resuming works without any problems.
Suspending from gnome "Shutdown dialog" works perfectly as well.
However, if suspending is initiated by gnome-power-manager something strange happens: After pressing the power button resuming switches to hibernation and my laptop turns off. Resuming from disk works fine again.
Now, suspending works fine again if I change and save any config file in /etc/pm/.
Here comes the strange thing: It doesn't really matter what I change as long as I save it.
However, as soon as I reboot resuming fails again the way I described above.
Anyone have a clue what's going on?
I get no error messages and I've tried all sorts of boot entries.
Last edited by mehldutt (2007-12-26 19:42:31)

After some try and error my guess is that "HAL" is responsible for this problem:
I deinstalled ACPID and 'pm-utils' and switched to 'uswsusp'.
I made the appropriate changes to the appropriate hal-scrips
usr/lib/hal/scripts/hal-system-power-suspend:
#!/bin/sh
/sbin/s2ram --force
usr/lib/hal/scripts/hal-system-power-hibernate:
#!/bin/sh
/sbin/s2disk
After these changes I still have the same problem: immidiatly after resuming form suspend (via power-button) my laptop hibernates (s2disk).
However, if I delete all entries in "usr/lib/hal/scripts/hal-system-power-hibernate" resuming from suspend works fine again, but hibernate doesn't of course. So, some script must be calling "usr/lib/hal/scripts/hal-system-power-hibernate" emmediatly after resuming from suspend.
A couple of weeks ago everything worked fine. My guess is that one of the recent hal-updates is causing this.
How can I figure what script is calling "usr/lib/hal/scripts/hal-system-power-hibernate" after resuming from suspend?

Strange sorting with Soundtracks and Compilations

Similar Messages

Maybe you are looking for