Strange sound when switching on the microph

i use a "sound blaster li've! value".
i don't remember when this strange signal noise had appeared but later found out, that you can hear it only, if you turn on the microphone input.
the noise appears and disappears and it doesn't change if you use or do not use the microphone jack.
my english is too bad to find the right word for the sound but it think this is the most accurate description for it: if you fry an egg in a frying pan you'll get this cracking sound, sometimes it gets louder an if the pan gets colder the sound volume decreases. if you plug a connector into the output jack very slowly you could hear a similar sound.
to solve this problem i tried to change the audio driver, i tried using the "kx project". the problem appears with this driver as soon as i turn on the ac97 chip.
therefore i assume the ac97 chip is broken.
if there isn't a way to solve this, is there a way to use my onbord c-media audio chip parallel to my soundblaster? the c-media chip is crap and i would just use the microphone input, the output should be done by the soundblaster, is this possible?
if somebody has an idea, please answer me!
thanks, uli

You are quite welcome.
To disable the Zoom function go to: Settings - General - Accessibility - Zoom = Off

Similar Messages

  • My ipod makes a strange sound when on ans nothing appears in the screen, is it a hard drive problem?

    my ipod makes a strange sound when on ans nothing appears in the screen, is it a hard drive problem?

    it is disrespectul not responding not responding to my request. anyone i can report that to?

  • Hi.. i bought an ipad from frys store last week. but when i use it, the home button has some strange sound when i push it. if i want to exchange at apple store, it could be

    hi.. i bought an ipad from frys store last week. but when i use it, the home button has some strange sound when i push it. if i want to exchange at apple store, it could be

    Does Target accept returns from something you bought at Wal-Mart?
    Bring it back to Fry's.

  • Macbook pro late 2013, strange sound when booting

    My 3 days old macbook pro keeps strange sound when booting, it lasts like one second, and it reminds me of a cd drive trying to read cd, but here's no even the cd drive. what could be going on inside my mac, and should i take this to repair? the sound only comes when booting, not after boot, or when using.

    You can return a new Mac within 14 days of purchase.
    A new Mac is in warranty for 1 year from the date of purchase.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare.
    Best.

  • IPhone making strange sound when receive all types of message.

    I've bought my iPhone 4S last week and it started making a really strange sound when receiving all sorts of messages (e-mail, whatsapp, sms). The sound is the sound I selected for each one but it loops 4 or 5 times everytime! What can it be?

    If no change after powering your iPhone off and on, try an iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so. An iPhone reset does not affect any data or settings.

  • Why do I get the 'critical stop' sound when I leave the firefox browser - doesn't happen with explorer?

    Why do I get the 'critical stop' sound when I leave the firefox browser. This doesn't happen when using internet explorer?

    Do you mean that there is a problem with closing Firefox?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Try to use "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit) to close Firefox if you are currently doing that by clicking the close X on the Firefox title bar.

  • Does anyone get a vibration sound when talking on the iPhone6? It doesn't happen all the time and happens with talking to different people.

    Does anyone get a vibration sound when talking on the iPhone6? It doesn't happen all the time and happens with talking to different people. I have tried to troubleshoot it, but can't find a answer.

    Hey CEVYNBARRY!
    Here is an article for you that will help you address this issue:
    Troubleshooting "A connection failure has occurred", "The specified server could not be found" or similar messages
    http://support.apple.com/kb/ts1843
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Good evening every one! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me

    Good evening ! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me what to do
    (i live in morocco and i need to know where i should take ma macbook to get it fixed and if the warranty take this problem in charge)
    thank you in advance
    macbook pro mid2012 i7 (here is my e-mail adress : [email protected])

    You should take it to an Apple store or an AASP (Authorized Apple Service Provider) Carefully inspect the hinge joint and make sure there is no debris that you can see, you can try carefully sliding some sticky tape thru the joint to clear any loose stuff out. But this sounds like there might be more going on here, and the hinge is something that you do not want to fool with.

  • Since loading IOS7 i get a crackling sound when I use the ipad to video something

    When I video something now i get a crackling sound when I replay the video. From reading some sites it seems the problem comes from the time I downloaded tge latest ios7 update. I an trying to find out how to recover from this problem

    Hey 24DubliN,
    Thanks for the question. I understand that you are experiencing issues with your iPad 2 in relation to sound. To troubleshoot the microphone on your device, see the following resource. While titled for iPhones, most of the steps are applicable for your iPad as well:
    iPhone: Microphone issues
    http://support.apple.com/kb/TS5183
    Thanks,
    Matt M.

  • How to prevent re-login when switching in the application between different module in 6.1.1.1.11?

    How to prevent re-login when switching in the application between different module in 6.1.1.1.11?
    Please help me to figure out this or resolve this issue?

    Be sure to check that your Remoting Container service is running. If it is not, restart the service, and if it goes down again, check the event logs.
    Make sure that the AuthenticationBridgeService is enabled in your EnvironmentSettings.config, and the remoting container user is configured using the SetupAssistant.
    <RemotingContainer>
             <ConfigInfo configChildKey="key">
                   <add key="UserID" value="@@VAR:Prodika.RemotingContainer.SysUser@@" />
             </ConfigInfo>      
            <!-- Set the following services isActive flag to 'true' or 'false' -->
             <RemoteServices configChildKey="name">
                 <Service
                     name="AuthenticationBridgeService"
                     port="@@VAR:Prodika.AuthenticationBridge.Port@@"
                     isActive="true" />
    If the Remoting Container Service fails, please contact Support with details from the event logs.

  • I'm getting a random beep sound when I hit the input button to record a turntable

    I'm getting a random beep sound when I hit the input button to record a turntable & mixer plugged into the mbox thats bleeding into the recording. How can I stop this? Please help me. It's happening if I'm recording or not, as soon as I hit the (I) input it beeps randomly.

    Thanks Jim,
    Seems to be this song. Other projects don't have this issue.
    I even took and opened the project on another computer, bounced it again and got the same "click" at the same 13 second area.
    I've bounced each track solo, listened and NO click at the 13 sec. mark
    No third party plug-ins.
    The click doesn't land close to any beginning or end of a region.
    Final mix down looks good, no peaking over 0db.
    This is making me nuts!

  • TS3474 The sound goes from high to no sound when listening to the Ipod?

    The sound goes from high to no sound when listening to the Ipod?

    If I wiped my phone I wouldn't have the contacts on my phone to send to my self.    I would need to take just the contacts from my back up. I would have to do this through iTunes and I don't see how I can just extract the contacts only from my back up. From what I can figure out it is all or nothing

  • Why is there a clicking sound when I close the cover and enter sleep mode?

    why is there a clicking sound when I close the cover and enter sleep mode?

    Hi katesvca,
    I too have an iPad smart cover, and all that clicking sound is is basically the standard lock sound for iOS. The Smart cover is equipped with magnets inside, and the iPad is also equipped with magnets, and when those magnets are closed together the iPad goes to sleep.
    I hope this answers your question.

  • What could be wrong with my iMac? When switched on the screen displays the apple logo with a busy bar at the bottom of the screen. This displays the progress of the computer trying to do something. To fill the bar takes about 30 mins and then switches off

    What could be wrong with my iMac? When switched on the screen displays the apple logo with a busy bar at the bottom of the screen. This displays the progress of the computer trying to do something. To fill the bar takes about 30 mins and then switches off

    Which OS X is installed?

  • Why the iphone 4 does not have sound when I watching the recorded video?

    why the iphone 4 does not have sound when I watching the recorded video?

    Have you turned up the volume?
    Try the buttons, or the bottom audio slider.
    Does your phone normally play audio?
    And have you tried to record and audio note to check if your microphone is not faulty.

Maybe you are looking for

  • Multiple Page PDF Creation

    I would like to be able to scan in individual pages and then combine them as multiple page PDFs using Leopard. Can this be done? I don't have any PDF creation software.

  • FAGL_FC_TRANS FAS52 New GL ECC 6.0

    Hi, I  have implemented the following notes: 1) SAP Note 1094379 - FAGL_FC_TRANSLATION: Posting with a Ledger Group 2) SAP Note 1227385 - FAGL_FC_TRANS: Using valuated account as adjustment account After implementing the below 2 notes - i was success

  • Missing namespace on a signed document

    Hi, I'm signing a document which has this original format: <LceEnvioLibros xmlns="http://www.sii.cl/SiiLce" xmlns:ds="http://www.w3.org/2000/09/xmldsig#" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.sii.cl/SiiL

  • Client Copy Error

    Dear All, PLease help to sort this isuue. i have created client 810 & try to copy client from 800 to 810 in the same SAP application server., Error comes after 35% to 40% completion of Client Copy. Error - maximum runtime exceeded. once i see SAP Not

  • Configuring IdM 7 on Tomcat 5.5 to use a Mysql (5.0.41) datasource

    I've been trying, for some time now, to configure Idm 7 to use a mysql datasource using the interface provided by the lh setup coomand. I'm supply the following values: DataSource Name/Path: jdbc/wavesetDB Initial Context Factory: com.mysql.jdbc.jdbc