Strange sounds while using safari
I have a relatively new MacBook. Recently when I start up Safari I hear foreign voices as if I'm eavesdropping on a conversation. . I don't have anything else running and it doesn't matter what URL I'm on.
I was on a wi-fi network at a resort about a week ago. Could I have picked up something. An Apple hardware scan turned up nothing.
Thoughts?
Does Safari go to the www.apple.com page or some other page? Are these voices saying the same thing each time (as in replaying an unseen video)? Take a look at this thread. https://discussions.apple.com/message/15807494#15807494
Similar Messages
-
I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset Safari. Website works fine on Firefox.
I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset Safari. Website works fine on Firefox.
-
IPhone 5 making weird sound while using Viber
My iphone will start making strange low tone beep sound while using viber. Only when I close the app (holding it long at multi-task and clicking the X) will it stop. And then when I open it again it will start making weird beeps again. Please help.
Hey there kben,
I'm sorry to hear that your iPhone is having the same issues. This is not a known issue on the device so lets try and take a look to see what is causing it. Did you have this issue before the 7.0.2 updated? Please try a soft reset,http://vz.to/16Qv4Id and let us know if the issues persist.
If the soft reset does not work, I would recommend performing a hard reset on the device,http://vz.to/17aDIPT.
Let us know if you need any additional assistance.
NicholasB_VZW
Follow us on Twitter @VZWSupport -
My iMac freezes while using safari. I have Mavericks installed
Several times my iMac freezes while using Safari. Only way to get out is to do a hard shut-down by holding the start button. Any ideas? Version of Maveriks is 10.9.2
MelHardware Information:
iMac (21.5-inch, Late 2009)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
ATI Radeon HD 4670 - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 1:31:41
Disk Information:
APPLE HDD HUA722010CLA330 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (803.35 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5680H
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Western Digital My Passport 0748 1 TB
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 999.83 GB
Boot OS X (disk1s3) <not mounted>: 134.2 MB
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
LaCie d2 quadra (button) 800mbit - 800mbit max
disk2s1 (disk2s1) <not mounted>: 32 KB
LaCie (disk2s3) /Volumes/LaCie: 1 TB (19.21 GB free)
Thunderbolt Information:
Kernel Extensions:
com.intego.netbarrier.kext.monitor (653)
com.intego.netbarrier.kext.process (653)
com.intego.netbarrier.kext.network (653)
com.intego.virusbarrier.kext.realtime (772)
net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8)
net.kromtech.kext.Firewall (2.3.6 - SDK 10.8)
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.intego.commonservices.daemon.integod.plist 3rd-Party support link
[System] com.intego.commonservices.daemon.taskmanager.plist 3rd-Party support link
[System] com.intego.commonservices.icalserver.plist 3rd-Party support link
[System] com.intego.commonservices.metrics.kschecker.plist 3rd-Party support link
[System] com.intego.netbarrier.daemon.logger.plist 3rd-Party support link
[System] com.intego.netbarrier.daemon.monitor.plist 3rd-Party support link
[System] com.intego.netbarrier.daemon.plist 3rd-Party support link
[System] com.intego.netupdate.daemon.plist 3rd-Party support link
[System] com.intego.virusbarrier.daemon.emlparser.plist 3rd-Party support link
[System] com.intego.virusbarrier.daemon.logger.plist 3rd-Party support link
[System] com.intego.virusbarrier.daemon.plist 3rd-Party support link
[System] com.intego.virusbarrier.daemon.scanner.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.trusteer.rooks.rooksd.plist 3rd-Party support link
[System] com.zeobit.MacKeeper.AntiVirus.plist 3rd-Party support link
Launch Agents:
[System] com.google.keystone.agent.plist 3rd-Party support link
[System] com.intego.commonservices.integomenu.plist 3rd-Party support link
[System] com.intego.commonservices.taskmanager.plist 3rd-Party support link
[System] com.intego.commonservices.uninstaller.plist 3rd-Party support link
[System] com.intego.netbarrier.alert.plist 3rd-Party support link
[System] com.intego.netupdate.agent.plist 3rd-Party support link
[System] com.intego.virusbarrier.alert.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.trusteer.rapport.rapportd.plist 3rd-Party support link
[System] com.wacom.pentablet.plist 3rd-Party support link
User Launch Agents:
[not loaded] ca.indev.MailTagsHelper.agent.plist 3rd-Party support link
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist 3rd-Party support link
[not loaded] com.zeobit.MacKeeper.Helper.plist 3rd-Party support link
[not loaded] ws.agile.1PasswordAgent.plist 3rd-Party support link
User Login Items:
Garmin Lifetime Map Updater
iTunesHelper
TextExpander (3.1.1)
FaceTime
EvernoteHelper
Fantastical
Dropbox
AdobeResourceSynchronizer
EvernoteHelper
IntegoStatusItemHelper
Internet Plug-ins:
o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
WacomNetscape: Version: 1.1.0-4 3rd-Party support link
Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.0.0.126 - SDK 10.8 3rd-Party support link
OfficeLiveBrowserPlugin: Version: 12.3.4 3rd-Party support link
WacomSafari: Version: 1.1.0-4 3rd-Party support link
Silverlight: Version: 4.1.10329.0 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
iPhotoPhotocast: Version: 7.0
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
CANONiMAGEGATEWAYDL: Version: 3.2.0.1 - SDK 10.6 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Safari Extensions:
1Password: Version: 3.9.20
Evernote Web Clipper: Version: 6.1
AdBlock: Version: 2.6.18
Open in Internet Explorer: Version: 1.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
RocketLifeCmp: Version: (null) 3rd-Party support link
UploadManager: Version: (null) 3rd-Party support link
WebEx64: Version: 1.0 - SDK 10.5 3rd-Party support link
WebEx: Version: 1.0 3rd-Party support link
RocketEngine: Version: (null) 3rd-Party support link
ContentManager: Version: (null) 3rd-Party support link
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
3rd Party Preference Panes:
PenTablet 3rd-Party support link
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Java 3rd-Party support link
MacFUSE 3rd-Party support link
Trusteer Endpoint Protection 3rd-Party support link
Old Applications:
/Users/[redacted]/Downloads
NoteBook-4: Version: 3.1.7 - SDK 10.5 3rd-Party support link
NoteBook-5: Version: 3.1.8 - SDK 10.5 3rd-Party support link
NoteBook-6: Version: 3.1.8 - SDK 10.5 3rd-Party support link
NoteBook-2: Version: 3.1 - SDK 10.5 3rd-Party support link
NoteBook: Version: 3.0.15 - SDK 10.5 3rd-Party support link
NoteBook-3: Version: 3.1.2 - SDK 10.5 3rd-Party support link
NoteBook-7: Version: 3.1.9 - SDK 10.5 3rd-Party support link
NoteBook-1: Version: 3.0.10 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Meeting Center: Version: 12.27.23.0 - SDK 10.5 3rd-Party support link
/Users/[redacted]/Library/Application Support/WebEx Folder/1124/Meeting Center.app
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
NoteBook: Version: 3.1.9 - SDK 10.5 3rd-Party support link
Family Tree Maker: Version: 19.2.4 - SDK 10.5 3rd-Party support link
Garmin Lifetime Map Updater: Version: 2.2 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Network Recording Player: Version: 2.2.0 - SDK 10.5 3rd-Party support link
/Users/[redacted]/Library/Application Support/WebEx Folder/500/Network Recording Player.app
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Garmin Map Update: Version: 4.5.1 - SDK 10.5 3rd-Party support link
/Users/[redacted]/Library/Application Support/Garmin/Garmin Map Update/tmp/Garmin Map Update.app
/Users/[redacted]/Library/Application Support/WebEx Folder/1224
Cisco WebEx Meeting Center: Version: 11.24.32.0 - SDK 10.5 3rd-Party support link
asannotation2: Version: 8.25.31.0 - SDK 10.5 3rd-Party support link
atmsupload: Version: 4.14.29.0 - SDK 10.5 3rd-Party support link
convertpdf: Version: 1.2 - SDK 10.5 3rd-Party support link
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 182.53 GB
Destinations:
LaCie [Local] (Last used)
Total size: 931.39 GB
Total number of backups: 90
Oldest backup: 2012-07-26 15:05:23 +0000
Last backup: 2014-04-06 18:34:11 +0000
Size of backup disk: Adequate
Backup size 931.39 GB > (Disk used 182.53 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
6% mds
3% AntiVirus
2% EtreCheck
2% WindowServer
0% ocspd
Top Processes by Memory:
270 MB Safari
229 MB AntiVirus
164 MB mds_stores
156 MB com.apple.IconServicesAgent
131 MB MacKeeper Helper
Virtual Memory Information:
3.53 GB Free RAM
2.76 GB Active RAM
950 MB Inactive RAM
802 MB Wired RAM
676 MB Page-ins
0 B Page-outs -
Powerbook crashes while using Safari
Hi, My Powerbook G4 keeps crashing while using Safari. Not everytime I use it but a few times a day...enough to be irrating. I'm including a problem report. I've done some housekeeping...up to reinstalling the system software. Thanks much for any help.
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000409C4008 PC=0x0000000000034A70
Latest crash info for cpu 0:
Exception state (sv=0x3C86A780)
PC=0x00034A70; MSR=0x00001030; DAR=0x409C4008; DSISR=0x40000000; LR=0x00034A5C; R1=0x17593D70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000326E0 0x00032BD8 0x002CEFE4 0x000A9894
Proceeding back via exception chain:
Exception state (sv=0x3C86A780)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2D022C80)
PC=0x9522AC28; MSR=0x0000F030; DAR=0xE00BF000; DSISR=0x42000000; LR=0x9522AB1C; R1=0xBFFFE320; XCP=0x00000400 (Unknown code)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x003DD520 0x002DA030 0x006C59C8 0x0050FC08 0x0050AE28 0x0050A8D8 0x0050A590 0x0050A054
0x0050AA78 0x0050A444 0x005102CC 0x002CFF1C 0x002D0090 0x002CEFE4 0x000A9894
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleKauaiATA(1.2.1f4)@0x6c3000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x479000
dependency: com.apple.iokit.IOATAFamily(1.6.0f2)@0x504000
com.apple.iokit.IOATAFamily(1.6.0f2)@0x504000
Proceeding back via exception chain:
Exception state (sv=0x3C86A780)
PC=0x00034A70; MSR=0x00001030; DAR=0x409C4008; DSISR=0x40000000; LR=0x00034A5C; R1=0x17593D70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000326E0 0x00032BD8 0x002CEFE4 0x000A9894
Exception state (sv=0x2D022C80)
PC=0x9522AC28; MSR=0x0000F030; DAR=0xE00BF000; DSISR=0x42000000; LR=0x9522AB1C; R1=0xBFFFE320; XCP=0x00000400 (Unknown code)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPCModel: PowerBook5,3, BootROM 4.7.0f2, 1 processors, PowerPC G4 (1.1), 1.33 GHz, 1 GB
Graphics: ATI Mobility Radeon 9600, ATY,RV350M10, AGP, 64 MB
Memory Module: SODIMM0/J20STANDARD, 512 MB, DDR SDRAM, PC2700U-25330
Memory Module: SODIMM1/J23REVERSED, 512 MB, DDR SDRAM, PC2700U-25330
AirPort: AirPort Extreme, 404.2 (3.90.34.0.p16)
Modem: LastDash, UCJ, V.92, 4.0, APPLE VERSION 2.6.6
Bluetooth: Version 1.7.0f18, 2 service, 1 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
Parallel ATA Device: MATSHITADVD-R UJ-816,
Parallel ATA Device: Hitachi IC25N080ATMR04-0, 74.53 GB
USB Device: Hub, , Up to 480 Mb/sec, 500 mA
USB Device: USB2223, SMSC, Up to 480 Mb/sec, 500 mA
USB Device: Hub, , Up to 480 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
USB Device: Hub, , Up to 480 Mb/sec, 500 mA
USB Device: EPSON Scanner, EPSON, Up to 480 Mb/sec, 500 mA
USB Device: USB-PS/2 Optical Mouse, Logitech, Up to 1.5 Mb/sec, 500 mA
USB Device: USB2.0 Printer (Hi-speed), EPSON, Up to 480 Mb/sec, 500 mA
USB Device: USB2.0 Storage Device, DMI, Up to 480 Mb/sec, 500 mA
USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
Powerbook G4 17" Mac OS X (10.4.4)Hold down the Sleep (or lock) button while holding the Home button. Keep holding them down until you see the Apple logo on screen. Do it for however long it takes to see the logo (like up to ten seconds). Let go when you see the logo and it will reboot.
If that doesn't do it then something has gone seriously wrong but I doubt a Safari crash could have been the cause of that kind of problem. -
Cursor keeps disappearing while using Safari
While using Safari the cursor/arrow will randomly disappear. I have to move the cursor/arrow beyond the Safari page and click on the desktop somewhere to make it reappear. This was happening on my MBP 15" for the last few months, now it is happening on my Mac Pro. Any suggestions on how to fix this?? Any help greatly appreciated. Thanks!
Jany --
I'm sorry, I didn't mean to come across that way.
I was just trying to suggest turning them ALL off to see if that helped.
If things were way better, the user could put one back at a time, which
would find the culprit.
Sorry, all this Flash stuff and suspicions of evil doing somehow
caught up with me.
ANYway, It's cool that you're making progress.
If your cursor doesn't disappear in other apps, like word processing or email,
it' probably not your mouse, either -
My new ipad mini wifi with retina, 16GB reboots itself with a blue screen while using Safari. Can the bug be fixed?
Hi, Venkche.
Thank you for visiting Apple Support Communities.
Here are a couple resources that have some helpful troubleshooting steps for this issue. These are labeled for the iPhone, but the steps will also apply for the iPad.
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
Jason H. -
Hello,
while using Safari (6.0.1) with OS 10.8.2 I have to wait for 2-3sec while scrolling at a website.
The website is fully loaded, I want to scroll, then the 'beach ball' comes and I have to wait 2-3 sec. Then I can scroll.
This happens on nearly every site, independently of the content of the site.
Any help?
Thanks
GerhardThanks Linc,
this ist great and works instantly.
I wasn't able to bring these two things together, because I had the problem that iCloud Tabs do not work at my macbook before, but they do on all of my mobile devices (mobile to mobile) But my Mac does not work in any direction.
Is there also a soulution existing for this? Of course I tried to switch in and off.
Bokkmarks works fine...
Thanks again
Gerhard
p.s. should I open a new thread for this? -
Wierd icon while using Safari...
Hi,
Just a few moments ago while browsing the apple discussions website, my cursor changed from an arrow to a spinwheel-like cursor only this time it looked like a BMW logo with a black triangle on top of it (pointing like 120 degress to the left). It happened while using Safari. It showed in the category selection that appears when one clicks the "New" link, and then the "Discussion" button while in Apple Communities.
Does anyone know what it means?
I found an image of it (photo credit: Raza Syed / flickr.com)
http://www.flickr.com/photos/raza/2721851036
Thanks!Take a look at this outside thread
http://forums.macrumors.com/showthread.php?t=613548
Post # 22 there includes:
This is the "wait" cursor that Apple's JAVA implementation uses in certain situations. -
My Autofill does not work while using Safari. I have checked both my Safari settings and my Apple settings but don't know what else to do.
Hi Eustace....yes, I did reset Safari but it didn't help. I'm running Mac OS X Lion 10.7.5...which might be the problem...my Safari is Version 6.1.1.
-
IMac freezing up while using Safari
My iMac freezes up sometimes while using Safari and even trying to force quit doesn't help because the computer is totally frozen up.
I have left my Activity Monitor open and when it froze again today I was able to see that the system memory seems to be the problem area.
I see the following under System Memory:
Free almost nothing (here's the problem)
Wired 1.09 Gb
Active 2 Gb
Inactive 3.9 Gb
Why is the ratio between Free and Inactive memory so high?
When the computer eventually unfreezes the Free memory returns to about 4 GB, seems where it should be.
Wondering what could be using the Free memory ?You have a lot of issues.
A.
To remove the Codec-M spyware, first back up all data, then select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. For any extension with a name you don't recognize, select it and click Uninstall. If in doubt, delete all extensions.
If you use Firefox or Chrome, take the corresponding steps in those browsers. You might have to delete Chrome completely and reinstall it from a fresh download.
Triple-click anywhere in the line of text below on this page to select it:
~/Library/LaunchAgents/com.codecm.uploader.plist
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder may open with a file selected. Delete the selected file. Then do the same with this line:
~/Library/Application Support/Codec-M
Finally, this:
/Applications/Codec-M.app
This time you may be prompted for your administrator password.
Log out and log back in.
B.
Remove "MacKeeper" as follows.
"MacKeeper" is a scam with only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
If you have incompletely removed MacKeeper—for example, by dragging the application to the Trash and emptying—then you'll have to reinstall it and start over.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
☞ Quit MacKeeper before dragging it to the Trash.
☞ Don't empty the Trash. Let MacKeeper delete itself.
☞ Don't try to drag the MacKeeper Dock icon to the Trash.
C.
Remove "Rapport" by following the instructions on this page.
D.
Remove "Eltima Player," which is garbage.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and (unless otherwise specified in this comment) I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.
E.
If your ISP is not StarHub Cable Vision in Singapore, you need to change your network settings. Ask for instructions.
F.
Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock all your user files, reset their ownership, and remove their access-control lists. If you've set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar.
G.
If you still have problems after all the above, remove "SurfEasy." -
Greetings everyone,
I am experiencing some weird behavior while using External Subtitles, e.g. Playing an AVI file with PS3MediaServer works fine but playing the very same AVI file with external subtitles gives me the video with subtitles and no sound.
My Server configuration is as follows :
Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
RAM :2048 Mo
OS : Archlinux 2.6.37-ARCH #1 SMP PREEMPT Tue Mar 8 08:34:35 CET 2011 x86_64
Target : Playstation 3 Slim, firmware 3.60
Here are the various Sofware versions I use :
PMS version I am using is PS3 Media Server 1.21.0 (built from AUR, PKG: pms-svn)
Java version is Java: 1.6.0_22-Sun Microsystems Inc.
MPlayer version is "MPlayer SVN-r32792-4.5.2 (C) 2000-2011 MPlayer Team" and so is "MEncoder SVN-r32792-4.5.2 (C) 2000-2011 MPlayer Team"
TSMuxer version is "1.10.6-10"
FFMpeg version is "FFmpeg version git-2611e52"
The network configuration of the server is : 192.168.0.20, netmask 255.255.255.0 ; 100MBits Full Duplex (Wired)
The network configuration of the Playstation 3 is : 192.168.0.15, netmask 255.255.255.0 ; Auto (Wired, no WiFi !)
Both are linked on a 100MBits Switch : Playstation 3 <--> Switch 100 Mbits <--> PS3 Media Server
My PMS.conf is :
thumbnails = true
language =
prevents_sleep_mode = true
folders = \/srv\/shares
network_interface = eth0
hide_empty_folders = true
hide_media_library_folder = true
hide_transcode_folder = true
hide_enginenames = true
enable_archive_browsing = false
audio_thumbnails_method = 2
mencoder_subfribidi = false
mencoder_disablesubs = false
autoloadsrt = true
hostname =
port = 5001
thumbnail_seek_pos = 10
nbcores = 4
turbomode = true
minimized = false
hidevideosettings = false
charsetencoding = 850
engines = mencoder,avsmencoder,tsmuxer,mplayeraudio,ffmpegaudio,tsmuxeraudio,mencoderwebvideo,mplayervideodump,mplayerwebaudio,ffmpegdvrmsremux
avisynth_convertfps = true
avisynth_script = #AviSynth script is now fully customisable
transcode_block_multiple_connections = false
tsmuxer_forcefps = true
tsmuxer_preremux_pcm = false
tsmuxer_preremux_ac3 = false
audiochannels = 2
audiobitrate = 384
maximumbitrate = 0
skiploopfilter = false
mencoder_fontconfig = false
mencoder_font =
mencoder_forcefps = false
mencoder_usepcm = false
mencoder_intelligent_sync = true
mencoder_decode =
mencoder_encode = keyint=1:vqscale=1:vqmin=2
mencoder_nooutofsync = true
# mencoder_audiolangs = fre,eng
# mencoder_sublangs = fre,off;fr,off;eng,off;en,off
mencoder_audiosublangs = fre,off;fr,off;eng,off;en,off
mencoder_ass_scale = 1.0
mencoder_ass_margin = 10
mencoder_ass_outline = 1
mencoder_ass_shadow = 1
mencoder_noass_scale = 3
mencoder_noass_subpos = 2
mencoder_noass_blur = 1
mencoder_noass_outline = 1
mencoder_subcp = cp1252
mencoder_ass = false
mencoder_yadif = false
mencoder_scaler = false
mencoder_scalex = 0
mencoder_scaley = 0
ffmpeg = -g 1 -qscale 1 -qmin 2
# The next value has to be chosen very carefully: to low = possible stuttering if the network is congested, but
# to high causes the java heap to be to small. Check the -Xmx-setting in /opt/pms/PMS.sh and raise it to 1024M
# or higher if you see unexplainable Out Of Memory-errors in the debug.log
maxvideobuffer = 400
use_mplayer_for_video_thumbs = false
# The next value sorts your media files. 0 (default) = A-Z while 1 = Z-A
sort_method =
usecache = true
forcetranscode=
Here are the tests I have run :
MediaInfo output
General
Complete name : test without subs.avi
Format : AVI
Format/Info : Audio Video Interleave
File size : 350 MiB
Duration : 42mn 24s
Overall bit rate : 1 153 Kbps
Writing application : transcode-1.0.6
Video
ID : 0
Format : MPEG-4 Visual
Format profile : Advanced Simple@L5
Format settings, BVOP : 2
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Default (H.263)
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 42mn 24s
Bit rate : 978 Kbps
Width : 624 pixels
Height : 352 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.186
Stream size : 296 MiB (85%)
Writing library : XviD 1.2.1 (UTC 2008-12-04)
Audio
ID : 1
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Mode : Joint stereo
Codec ID : 55
Codec ID/Hint : MP3
Duration : 42mn 23s
Bit rate mode : Variable
Bit rate : 160 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 49.4 MiB (14%)
Alignment : Aligned on interleaves
Interleave, duration : 24 ms (0.58 video frame)
Writing library : LAME3.90.
Encoding settings : -m j -V 4 -q 2 -lowpass 18 --abr 160
And its very same but with external subtitles :
-rw-r--r-- 1 svc-pms svc-pms 77159 Oct 12 12:57 test with subs.srt
-rw-rw-r-- 1 svc-pms svc-pms 366711578 Oct 23 10:50 test with subs.avi
MediaInfo output, just to acknowledge it is the same file, but with a different name
General
Complete name : test with subs.avi
Format : AVI
Format/Info : Audio Video Interleave
File size : 350 MiB
Duration : 42mn 24s
Overall bit rate : 1 153 Kbps
Writing application : transcode-1.0.6
Video
ID : 0
Format : MPEG-4 Visual
Format profile : Advanced Simple@L5
Format settings, BVOP : 2
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Default (H.263)
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 42mn 24s
Bit rate : 978 Kbps
Width : 624 pixels
Height : 352 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.186
Stream size : 296 MiB (85%)
Writing library : XviD 1.2.1 (UTC 2008-12-04)
Audio
ID : 1
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Mode : Joint stereo
Codec ID : 55
Codec ID/Hint : MP3
Duration : 42mn 23s
Bit rate mode : Variable
Bit rate : 160 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 49.4 MiB (14%)
Alignment : Aligned on interleaves
Interleave, duration : 24 ms (0.58 video frame)
Writing library : LAME3.90.
Encoding settings : -m j -V 4 -q 2 -lowpass 18 --abr 160
A- I tried playing the AVI file without external subtitles and it is working fine.
/var/log/pms.log :
GUI environment not available
Switching to console mode
[main] TRACE 06:17:02.228 Starting PS3 Media Server 1.21.0
[main] TRACE 06:17:02.237 by shagrath / 2008-2011
[main] TRACE 06:17:02.237 http://ps3mediaserver.org
[main] TRACE 06:17:02.237 http://ps3mediaserver.blogspot.com
[main] TRACE 06:17:02.238 http://code.google.com/p/ps3mediaserver
[main] TRACE 06:17:02.238
[main] TRACE 06:17:02.238 Java: 1.6.0_22-Sun Microsystems Inc.
[main] TRACE 06:17:02.238 OS: Linux amd64 2.6.37-ARCH
[main] TRACE 06:17:02.238 Encoding: UTF-8
[main] TRACE 06:17:02.238 PMS.conf: /filers/fvEXT3-01/_applications_/opt/pms/PMS.conf
[main] TRACE 06:17:02.238 Working directory: /filers/fvEXT3-01/_applications_/opt/pms
[main] TRACE 06:17:02.245 Temp folder: /tmp/ps3mediaserver
[main] TRACE 06:17:02.652 Loading configuration file: FreeboxHD.conf
[main] TRACE 06:17:02.662 Loading configuration file: XBMC.conf
[main] TRACE 06:17:02.666 Loading configuration file: FreecomMusicPal.conf
[main] TRACE 06:17:02.669 Loading configuration file: XBOX360.conf
[main] TRACE 06:17:02.685 Loading configuration file: PS3.conf
[main] TRACE 06:17:02.705 Loading configuration file: Streamium.conf
[main] TRACE 06:17:02.708 Loading configuration file: WDTVLive.conf
[main] TRACE 06:17:02.710 Loading configuration file: N900.conf
[main] TRACE 06:17:02.712 Loading configuration file: Philips.conf
[main] TRACE 06:17:02.715 Loading configuration file: Bravia4500.conf
[main] TRACE 06:17:02.718 Loading configuration file: WMP.conf
[main] TRACE 06:17:02.720 Loading configuration file: Samsung.conf
[main] TRACE 06:17:02.722 Loading configuration file: Bravia5500.conf
[main] TRACE 06:17:02.724 Loading configuration file: Realtek.conf
[main] TRACE 06:17:02.726 Loading configuration file: Kuro.conf
[main] TRACE 06:17:02.729 Loading configuration file: Android.conf
[main] TRACE 06:17:02.731 Loading configuration file: BraviaEX.conf
[main] TRACE 06:17:02.734 Loading configuration file: PopcornHour.conf
[main] TRACE 06:17:02.736 Checking font cache... launching simple instance of MPlayer... You may have to wait 60 seconds!
[main] TRACE 06:17:04.173 Done!
[main] TRACE 06:17:04.210 Loading plugins from /filers/fvEXT3-01/_applications_/opt/pms/plugins
[main] TRACE 06:17:04.227 No plugins found
[main] TRACE 06:17:04.257 Registering transcoding engine FFmpeg Audio
[main] TRACE 06:17:04.300 Registering transcoding engine MEncoder
[main] TRACE 06:17:04.300 Registering transcoding engine MPlayer Audio
[main] TRACE 06:17:04.301 Registering transcoding engine MEncoder Web
[main] TRACE 06:17:04.301 Registering transcoding engine MPlayer Video Dump
[main] TRACE 06:17:04.301 Registering transcoding engine MPlayer Web
[main] TRACE 06:17:04.303 Registering transcoding engine TsMuxer
[main] TRACE 06:17:04.303 Registering transcoding engine Audio High Fidelity
[main] TRACE 06:17:04.303 Registering transcoding engine VLC Audio Streaming
[main] TRACE 06:17:04.304 Registering transcoding engine VLC Video Streaming
[main] TRACE 06:17:04.304 Registering transcoding engine Raws Thumbnailer
[main] TRACE 06:17:04.401 Scanning network interface eth0 / eth0
[main] TRACE 06:17:04.403 Using address /192.168.0.20 found on network interface: name:eth0 (eth0) index: 2 addresses: /192.168.0.20;
[main] TRACE 06:17:04.403 Created socket: /192.168.0.20:5001
[main] TRACE 06:17:04.548 Using database located at : /filers/fvEXT3-01/_applications_/opt/pms/database
[main] TRACE 06:17:04.930 A tiny media library admin interface is available at: http://192.168.0.20:5001/console/home
[main] TRACE 06:17:05.001 Using the following UUID: d83f2e45-d8b8-3db7-b0ff-a6fc95ce046c
[New I/O server worker #1-1] TRACE 06:17:08.787 Renderer Playstation 3 found on this address: /192.168.0.15
[main] TRACE 06:17:09.902 It's ready! You should see the server appear on the XMB
[New I/O server worker #1-1] TRACE 06:17:10.794 Renderer Playstation 3 has an estimated network speed of: 93 Mb/s
/opt/pms/debug.log :
available at : http://dpaste.org/774i/
B - I tried playing the AVI file with external subtitles (SRT) and the file is playing with subtitles but no sound :-(
/var/log/pms.log :
GUI environment not available
Switching to console mode
[main] TRACE 06:20:24.967 Starting PS3 Media Server 1.21.0
[main] TRACE 06:20:24.968 by shagrath / 2008-2011
[main] TRACE 06:20:24.968 http://ps3mediaserver.org
[main] TRACE 06:20:24.968 http://ps3mediaserver.blogspot.com
[main] TRACE 06:20:24.968 http://code.google.com/p/ps3mediaserver
[main] TRACE 06:20:24.969
[main] TRACE 06:20:24.969 Java: 1.6.0_22-Sun Microsystems Inc.
[main] TRACE 06:20:24.969 OS: Linux amd64 2.6.37-ARCH
[main] TRACE 06:20:24.969 Encoding: UTF-8
[main] TRACE 06:20:24.969 PMS.conf: /filers/fvEXT3-01/_applications_/opt/pms/PMS.conf
[main] TRACE 06:20:24.969 Working directory: /filers/fvEXT3-01/_applications_/opt/pms
[main] TRACE 06:20:24.973 Temp folder: /tmp/ps3mediaserver
[main] TRACE 06:20:25.038 Loading configuration file: FreeboxHD.conf
[main] TRACE 06:20:25.040 Loading configuration file: XBMC.conf
[main] TRACE 06:20:25.041 Loading configuration file: FreecomMusicPal.conf
[main] TRACE 06:20:25.044 Loading configuration file: XBOX360.conf
[main] TRACE 06:20:25.047 Loading configuration file: PS3.conf
[main] TRACE 06:20:25.055 Loading configuration file: Streamium.conf
[main] TRACE 06:20:25.057 Loading configuration file: WDTVLive.conf
[main] TRACE 06:20:25.059 Loading configuration file: N900.conf
[main] TRACE 06:20:25.061 Loading configuration file: Philips.conf
[main] TRACE 06:20:25.063 Loading configuration file: Bravia4500.conf
[main] TRACE 06:20:25.065 Loading configuration file: WMP.conf
[main] TRACE 06:20:25.068 Loading configuration file: Samsung.conf
[main] TRACE 06:20:25.069 Loading configuration file: Bravia5500.conf
[main] TRACE 06:20:25.071 Loading configuration file: Realtek.conf
[main] TRACE 06:20:25.073 Loading configuration file: Kuro.conf
[main] TRACE 06:20:25.076 Loading configuration file: Android.conf
[main] TRACE 06:20:25.077 Loading configuration file: BraviaEX.conf
[main] TRACE 06:20:25.080 Loading configuration file: PopcornHour.conf
[main] TRACE 06:20:25.082 Checking font cache... launching simple instance of MPlayer... You may have to wait 60 seconds!
[main] TRACE 06:20:25.144 Done!
[main] TRACE 06:20:25.153 Loading plugins from /filers/fvEXT3-01/_applications_/opt/pms/plugins
[main] TRACE 06:20:25.153 No plugins found
[main] TRACE 06:20:25.160 Registering transcoding engine FFmpeg Audio
[main] TRACE 06:20:25.166 Registering transcoding engine MEncoder
[main] TRACE 06:20:25.167 Registering transcoding engine MPlayer Audio
[main] TRACE 06:20:25.167 Registering transcoding engine MEncoder Web
[main] TRACE 06:20:25.167 Registering transcoding engine MPlayer Video Dump
[main] TRACE 06:20:25.168 Registering transcoding engine MPlayer Web
[main] TRACE 06:20:25.169 Registering transcoding engine TsMuxer
[main] TRACE 06:20:25.169 Registering transcoding engine Audio High Fidelity
[main] TRACE 06:20:25.170 Registering transcoding engine VLC Audio Streaming
[main] TRACE 06:20:25.170 Registering transcoding engine VLC Video Streaming
[main] TRACE 06:20:25.170 Registering transcoding engine Raws Thumbnailer
[main] TRACE 06:20:25.223 Scanning network interface eth0 / eth0
[main] TRACE 06:20:25.224 Using address /192.168.0.20 found on network interface: name:eth0 (eth0) index: 2 addresses: /192.168.0.20;
[main] TRACE 06:20:25.224 Created socket: /192.168.0.20:5001
[main] TRACE 06:20:25.279 Using database located at : /filers/fvEXT3-01/_applications_/opt/pms/database
[main] TRACE 06:20:26.010 A tiny media library admin interface is available at: http://192.168.0.20:5001/console/home
[main] TRACE 06:20:26.017 Using the following UUID: d83f2e45-d8b8-3db7-b0ff-a6fc95ce046c
[New I/O server worker #1-1] TRACE 06:20:28.867 Renderer Playstation 3 found on this address: /192.168.0.15
[New I/O server worker #1-1] TRACE 06:20:30.872 Renderer Playstation 3 has an estimated network speed of: 93 Mb/s
[main] TRACE 06:20:32.488 It's ready! You should see the server appear on the XMB
[New I/O server worker #1-6] TRACE 06:20:56.875 Starting transcode/remux of test with subs.avi
So, obviously here, the only thing which changes from before was that, this time, the PS3 Media Server did a transcode/remux of the file (for the subtitles to be streamed)
/opt/pms/debug.log :
available at : http://dpaste.org/6XMI/
I have pasted the complete debug.log but I believe the problem is around this :
[New I/O server worker #1-6] DEBUG 06:20:56.874 Opened request handler on socket /192.168.0.15:64494 // Playstation 3
[New I/O server worker #1-6] DEBUG 06:20:56.874 Request: HTTP/1.0 : HEAD : get/0$0$4$0/test+with+subs.avi
[New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: Accept-Encoding: identity
[New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: Cache-Control: no-cache
[New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: Connection: close
[New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: Host: 192.168.0.20:5001
[New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: User-Agent: PLAYSTATION 3
[New I/O server worker #1-6] INFO 06:20:56.874 HTTP: get/0$0$4$0/test+with+subs.avi / 0-0
[New I/O server worker #1-6] DEBUG 06:20:56.874 Searching for objectId: 0$0$4$0 with children option: false
[New I/O server worker #1-6] DEBUG 06:20:56.875 Asked stream chunk [0-0] timeseek: 0.0 of test with subs.avi and player MEncoder
[New I/O server worker #1-6] TRACE 06:20:56.875 Starting transcode/remux of test with subs.avi
[New I/O server worker #1-6] DEBUG 06:20:56.875 Looking for an audio track with lang: eng
[New I/O server worker #1-6] DEBUG 06:20:56.883 Looking for an audio track with lang: fre
[New I/O server worker #1-6] DEBUG 06:20:56.884 Looking for an audio track with lang: jpn
[New I/O server worker #1-6] DEBUG 06:20:56.886 Looking for an audio track with lang: ger
[New I/O server worker #1-6] DEBUG 06:20:56.887 Looking for an audio track with lang: und
[New I/O server worker #1-6] DEBUG 06:20:56.888 Matched audio track: Audio: MP3 / lang: und / ID: 1
[New I/O server worker #1-6] DEBUG 06:20:56.888 Search a match for: und with fre and off
[New I/O server worker #1-6] DEBUG 06:20:56.889 Search a match for: und with fr and off
[New I/O server worker #1-6] DEBUG 06:20:56.889 Search a match for: und with eng and off
[New I/O server worker #1-6] DEBUG 06:20:56.890 Search a match for: und with en and off
[New I/O server worker #1-6] DEBUG 06:20:56.891 Found subtitles track: Sub: SubRip / lang: und / ID: 100 / FILE: /srv/shares/test_with_sub/test with subs.srt
[New I/O server worker #1-6] DEBUG 06:20:56.891 Found external file: /srv/shares/test_with_sub/test with subs.srt
[New I/O server worker #1-6] DEBUG 06:20:56.892 channels=2
[mkfifo] INFO 06:20:56.979 Starting mkfifo --mode=777 /tmp/ps3mediaserver/mencoder1300252856978
[mkfifo] INFO 06:20:56.995 Unix process ID (mkfifo): 4390
[mencoder] INFO 06:20:57.029 Starting mencoder -ss 0 -quiet /srv/shares/test_with_sub/test with subs.avi -quiet -quiet -oac lavc -of mpeg -quiet -quiet -mpegopts format=mpeg2:muxrate=500000:vbuf_size=1194:abuf_size=64 -ovc lavc -channels 2 -lavdopts debug=0:threads=4 -lavcopts autoaspect=1:vcodec=mpeg2video:acodec=ac3:abitrate=256:threads=4:keyint=1:vqscale=1:vqmin=2 -spuaa 3 -subfont-text-scale 3 -subfont-outline 1 -subfont-blur 1 -subpos 98 -quiet -quiet -sid 100 -quiet -quiet -ofps 24000/1001 -sub /srv/shares/test_with_sub/test with subs.srt -utf8 -mc 0 -noskip -af lavcresample=48000 -srate 48000 -o /tmp/ps3mediaserver/mencoder1300252856978
[mencoder] INFO 06:20:57.048 Reading pipe: /tmp/ps3mediaserver/mencoder1300252856978
[mencoder] DEBUG 06:20:57.049 Opening file /tmp/ps3mediaserver/mencoder1300252856978 for reading...
[New I/O server worker #1-6] DEBUG 06:20:57.129 Sleeping for 6000 milliseconds
[mencoder] INFO 06:20:57.395 Attaching thread: mencoder
[Timer-1] DEBUG 06:20:57.396 Buffered Space: 0 bytes / inputs: 0
[mencoder] INFO 06:20:57.396 Unix process ID (mencoder): 4395
[Thread-30] DEBUG 06:20:57.396 MEncoder SVN-r32792-4.5.2 (C) 2000-2011 MPlayer Team
[Thread-30] DEBUG 06:20:57.397 161 audio & 351 video codecs
[Thread-30] DEBUG 06:20:57.397 success: format: 0 data: 0x0 - 0x15db931a
[Thread-30] DEBUG 06:20:57.397 AVI file format detected.
[Thread-30] DEBUG 06:20:57.397 [aviheader] Video stream found, -vid 0
[Thread-30] DEBUG 06:20:57.397 [aviheader] Audio stream found, -aid 1
[Thread-30] DEBUG 06:20:57.397 VIDEO: [XVID] 624x352 24bpp 23.976 fps 977.5 kbps (119.3 kbyte/s)
[Thread-30] DEBUG 06:20:57.397 [V] filefmt:3 fourcc:0x44495658 size:624x352 fps:23.976 ftime:=0.0417
[Thread-30] DEBUG 06:20:57.397 ==========================================================================
[Thread-30] DEBUG 06:20:57.397 Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
[Thread-30] DEBUG 06:20:57.397 AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
[Thread-30] DEBUG 06:20:57.397 Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
[Thread-30] DEBUG 06:20:57.397 ==========================================================================
[Thread-30] DEBUG 06:20:57.397 PACKET SIZE: 2048 bytes, deltascr: 884
[Thread-30] DEBUG 06:20:57.397 Opening video filter: [expand osd=1]
[Thread-30] DEBUG 06:20:57.397 Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
[Thread-30] DEBUG 06:20:57.397 ==========================================================================
[Thread-30] DEBUG 06:20:57.397 Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
[Thread-30] DEBUG 06:20:57.403 Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
[Thread-30] DEBUG 06:20:57.403 ==========================================================================
[Thread-27] DEBUG 06:20:57.403 [ac3 @ 0xd37ca0]No channel layout specified. The encoder will guess the layout, but it might be incorrect.
[Thread-27] DEBUG 06:20:57.437 Limiting audio preload to 0.4s.
[Thread-27] DEBUG 06:20:57.437 Increasing audio density to 4.
[Thread-30] DEBUG 06:20:57.463 Movie-Aspect is 1.77:1 - prescaling to correct movie aspect.
[Thread-30] DEBUG 06:20:57.463 videocodec: libavcodec (624x352 fourcc=3267706d [mpg2])
[Thread-30] DEBUG 06:20:57.463 [VE_LAVC] Using constant qscale = 1.000000 (VBR).
[Thread-30] DEBUG 06:20:57.617 Writing header...
[Timer-1] DEBUG 06:20:59.396 Buffered Space: 26595328 bytes / inputs: 0
[Thread-28] DEBUG 06:21:01.227 freeMemory: 25791584
[Thread-28] DEBUG 06:21:01.227 totalMemory: 81592320
[Thread-28] DEBUG 06:21:01.228 maxMemory: 715849728
[Thread-28] DEBUG 06:21:01.228 Extending buffer to 419430400
[Timer-1] DEBUG 06:21:01.397 Buffered Space: 49999872 bytes / inputs: 0
[Thread-28] DEBUG 06:21:01.726 Done extending
Thing is, I do not have the same issue with files that are not (yet) MP3-Audio powered, for instance :
General
Complete name : /srv/shares/media03/directories/toto.avi
Format : AVI
Format/Info : Audio Video Interleave
Format profile : OpenDML
Format settings : rec
File size : 1.59 GiB
Duration : 1h 46mn
Overall bit rate : 2 140 Kbps
Writing application : AVI-Mux GUI 1.17.8.3, Feb 16 201019:42:50
Video
ID : 0
Format : MPEG-4 Visual
Format profile : Advanced Simple@L5
Format settings, BVOP : 2
Format settings, QPel : Yes
Format settings, GMC : No warppoints
Format settings, Matrix : Default (H.263)
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 1h 46mn
Bit rate : 1 620 Kbps
Width : 1 280 pixels
Height : 544 pixels
Display aspect ratio : 2.35:1
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.097
Stream size : 1.20 GiB (76%)
Writing library : XviD 1.2.1 (UTC 2008-12-04)
Audio #1
ID : 1
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : 2000
Duration : 1h 46mn
Bit rate mode : Constant
Bit rate : 384 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 292 MiB (18%)
Alignment : Aligned on interleaves
Interleave, duration : 64 ms (1.53 video frames)
Interleave, preload duration : 192 ms
Title : UW 6ch audio
Audio #2
ID : 2
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : 2000
Duration : 1h 46mn
Bit rate mode : Constant
Bit rate : 128 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 97.4 MiB (6%)
Alignment : Aligned on interleaves
Interleave, duration : 64 ms (1.53 video frames)
Interleave, preload duration : 192 ms
Title : UW 2ch audio
This file is well played by PS3 Media Server.
I am quite confused with this issue ; did anyone experienced the same thing ?
Best Regards,Having the same problem. I'm watching all of my movies without subs now, because transcoding kills the 5.1 audio (no problems with 2 channel audio). A workaround is posted in the comments of the pms-svn package.
I will post the URL to this thread to another thread with probably the same problem (mplayer/x264). I have not yet seen a real solution to this, and I'm not really familiar with the bugzilla's from both projects.
Other threads with similar problems:
https://bbs.archlinux.org/viewtopic.php?id=112219 (devede also uses mplayer and x264)
https://bugs.archlinux.org/task/22654 (related bug in Archlinux)
http://bugzilla.mplayerhq.hu/show_bug.cgi?id=1865 (related bug in mplayer)
https://bbs.archlinux.org/viewtopic.php?id=115165 (this thread)
Another workaround might be to trick pms into using ffmpeg or vlc rather than mencoder. I'm also streaming to a ps3 - I didn't try it, but it could be as easy as temporarily changing settings inside the profile for a ps3-client.
Last edited by zenlord (2011-03-22 16:15:38) -
Ipad 4 is rebooting in ios7 while using Safari.
While browsing using safari for long time, my ipad 4 restarts automatically
Hi there Anuj28,
I would recommend taking a look at the troubleshooting steps found in the article below. Note: While the article was written for the iPhone, these troubleshooting steps will apply in this situation.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. -
Very strange sound when using VoiceOver
Hi I am using my apple tv with VoiceOver when I am whatcing one of my movies that whas both
from iTunes Store and I puch the upp bottom on my remote 2 times to get the more info about
the movie I get a very strange sound don't know how to desgribe the sound it dose only come up
when the info aout the movie is up or any popup like window or is my hearing to good for my.And now the stranger things here... I didn't do much change to both the remote bean side and the client side, what I did is most like change it to something, and tried with failure, and change back.
But today 's morning, when I just change everything back to suppose to be, and it can find the homebean:
[2008-11-14 11:21:18,436] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) Looking up RepairEJB with JNDIName: RepairGatewayEJB_slsb
[2008-11-14 11:21:18,531] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) h is not null!!
[2008-11-14 11:21:18,532] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) got h: weblogic.rmi.internal.BasicRemoteRef@121 - hostID: '-891706141070674357S:113.128.134.59:[40010,40010,-1,-1,-1,-1,-1]:VPFSCTech:AdminServer', oid: '289'
[2008-11-14 11:21:18,533] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) After ctx.lookup();
[2008-11-14 11:21:18,535] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) homeBean is weblogic.rmi.internal.BasicRemoteRef@121 - hostID: '-891706141070674357S:113.128.134.59:[40010,40010,-1,-1,-1,-1,-1]:VPFSCTech:AdminServer', oid: '289'
[2008-11-14 11:21:18,537] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) After home bean;
[2008-11-14 11:21:18,589] [ INFO] [Thread-85] - Waiting for a request ...
but unfortunately again it just stopped at
remoteBean = homeBean.create();
with no errors and exceptions...
Does any experienced friends ever have this problem before? -
While using safari it suddenly opeens different pages and sends me to the app store.
The past few days I have been having problems with using safari. While I am browsing pages, all of the sudden safari opens several pages really quick and then switches to the App Store to download an app. But I didn't click on anything that should activate that. Yesterday it was an casino game. Today a animal game and hayday. This is getting really annoying. I can't even use the internet normally anymore.. Is this some kind of virus? I thought iPad couldn't get any kind of virus..
Example of pages
http://tracking.affiliates.de/aff_r?offer_id=2856&aff_id=1478&url=http%3A%2F%2Ft racking.altrooz.com%2Fmobile%2Fclick%3Fc%3D16%26s%3D94%26psubid%3D1026d37202d693 138c1b36e6a6c21e%26p%3D1478&urlauth=820156734997146433578627846572
http://cdn.mcextjmp.com/feed/detect
d.mobpartner.mobiYour iPad is as updated as it can be at 5.1.1. Your apps are crashing probably due to a lack of memory. Try keeping apps in the recents tray to a minimum. For starters close all apps completely, clear Safari and then reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Go to Settings>Safari>Clear History, Cookies and Data.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
See if this helps at all. If if does, remember to keep apps in the recents tray to a minimum. You shouldn't have to do that, but unfortunately, iOS 5.1.1 stretched the capability of the original iPad processor to its limits .... IMO!
Maybe you are looking for
-
Adobe Bridge CS5.1 - Edit Export Preset Crash
I have successfully duplicated this issue on multiple machines, multiple user accounts running variations of 10.7 - 10.7.2. All Adobe updates applied. Open Bridge CS5.1 > Click on EXPORT Panel tab > Save to Hard Drive (double click to edit) > choose
-
Have been using composite cables with my old iPad to watch movies on TV. About to purchase new iPad with lightning cable, so will the lightning to 30 pin adapter do the job of connecting my ipad to the composite cables? Will it play the movie success
-
I don't know how much more I can add...However, when I type in the Norton Safe Search box up to the search button in Norton Safe Search I can continue to type but I can't see what is being typed because it doesn't allow me to see the trailing end of
-
Unable to update record in web Form
Hi, i am unable to update record in a form. I am building a custom form using forms 6i and putting it on the web in oracle applications 11.5.9 I used template.fmb as a starting point for my form. I have one datablock based on a table. Insert, update
-
"Restoring the window layout", problem
no arranca se queda en "Restoring the window layout", ya eliminé la carpeta Layout, y no funcionó