Strange Surround Problem- someone please resond!
When I switch tracks over to surround output, C, RL, RR, and LFE all work fine, but L and R stop working...
In stereo mode L and R work perfectly...
All siginal is routed perfectly, as far as i can see, so it must be a logic problem...
Its probably user error, so... please help!!
Thanks
I have a presonus firebox - 6 channels out...
when i have the output set to stereo, it works fine, L and R are there
when I set the track to surround (the surround routing is set up correctly) L and R are gone... if i move the dot to the L or R, so panning the hard left or right, the sound disappears...
if i leave the dot in the center, i only hear C, RR, RL, and Sub...
Similar Messages
-
Interlacing Problems - Someone please help... on deadline- thanks!
Hi- I have a bunch of NTSC 1080i60 footage that says it's field dominance is upper (odd).
I've place them in a sequence and let the sequence conform to the clip, so it has the same settings.
I'm aiming to burn a dvd so I send it to Compressor and use the "DVD: Best Quality" preset. Then when the m2v is done and I play it in DVDSP or burn it to a DVD and play it on TV I'm getting what looks like an interlacing problem.
What am I doing wrong? I realize also that it won't look as sharp as a m2v, but how can I make it look the best?
Looking at the video settings in Compressor>Inspector>Video Format, I see that the field dominance is set to Top First!?! Perhaps this is the problem... should I change it to Progressive???
Bottom line is A) how do I get rid of the interlacing problem without making it fuzzy and B) what are the best settings I should use to get the sharpest looking DVD possible.
Thanks so muchHello Robert.
I just did the same thing. I found out that you need to mess with the frame controls to get the best results.
In the Encoder tab, I set the following:
In the video format, I select "Progressive" for the field dominance
In the quality tab, I use 2 pass VBR, with the default bitrates. I set the motion estimation to "better"
In the Frame Controls tab, I set the following:
Enable frame controls.
Select Progressive in the Output Fields drop box.
I have Resize Filter, Deinterlace, and Rate Conversion all set to "Better"
I leave adaptive details checked, although most in this forum that I have seen recommend unchecking that. I tried a bunch with and without, and couldn't tell a difference in render times.
I have anti-aliasing set to 10.
This gives me the best combination of picture quality and render times.
Using these settings, with an 8 core cluster setup, it took 17 hours to render a 40 min video.
Good luck, and happy rendering!
Ken -
Could someone please advise on my current problem? Apparantly I can no longer download tones to my phone or account to be used as such since the tones are being downloaded as songs that cannot be transferred or placed in the tones area for the phone or in iTunes. Prior to the last update, this was always an option. I have also noticed that the Ringtones and Alert Tones are not showing up in my recent purchases as well to allow for me to place them back on my phone and there for require for them to be purchased again... Any help would be greatly appreciated!
I've discovered that all tones purchased will be downloaded as ringtones, BUT they can be utilized as tones and assigned as alert tones on the iPhone...
-
I updated my iPad mini to ios 7.0.2 couple days ago. Everything was fine until yesterday. I noticed that it seemed to have a mind of its own. It kept opening and closing app. I'm not sure what to don to fix this problem. I've tried restoring my iPad mini but that didn't help. Can someone please help me?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help
Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
http://www.apple.com/itunes/
If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
1. Open the control panel
2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
3. Navigate to "Apple Software Update" in the list and click on it
4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
Once you repair this, try running iTunes and the update again.
Fingers crossed! -
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
dwgar1322 wrote:
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
Yes, you have WD software installed REMOVE IT !!
WD has warned its customers about their huge mistake that their software doesnt work on Mavericks and causes data loss.
(also dont use WD drives anymore)
Read all about it here:
https://discussions.apple.com/thread/5475136?start=255&tstart=0
See their website on removing the destructive WD software here:
http://community.wd.com/t5/External-Drives-for-Mac/External-Drives-for-Mac-Exper iencing-Data-Loss-with-Maverick-OS/td-p/613775
Western Digital External Hard Drives Experiencing Data Loss On OS X Mavericks
http://www.cultofmac.com/252826/western-digital-external-hard-drives-experiencin g-data-loss-on-os-x-mavericks/ -
SOMEONE PLEASE HELP WITH MISSING FILES XP PROBLEM
i recently purchased an ipod touch, and all i want to do is get some music on it, and update the firmware, but i cant use itunes, cuz im getting 'there are some files missing' problem.
I swear to god, if i dont get this fixed by the end of the week, im gonna post the latest video on youtube... on how to smash up apple products.
Ive been trying NOT to buy apple products since the first dawn of time, but i do actually like the ipod touch. But, low and behold... the very reason why i never buy apple products has been confirmed!
can someone PLEASE tell me if there is a solid fix for this? i have literally tried EVERYTHING before you ask. im at my wits end.
Using XP home, all updates installed... latest itunes,It will probably help if you'll post the exact error message and when it's occurring. Otherwise we'll just be guessing, not that someone here might not have a good guess. I'm going to guess that this thread might help:
http://discussions.apple.com/thread.jspa?messageID=11161893�
Regards. -
Will someone please answer this, major iPhone 3GS problem.
SOMEONE ANSWER ME!!!!!!
I am almost about to give up hope with this. I have posted FOUR questions with no answers, so someone please answer this one.
My iPhone 3GS has never been jailbroken. A couple of months ago now, the bottom half of my iPhone screen became unresponsive so I thought I would try to restore it to see if it would make it alright again. Worst mistake of my life. It is now stuck in recovery mode and will not come out, for anything. I have had various different error messages, i've tried everything. All the software programs, holding home and power and whatever else. Nothing. When trying to restore it, it will come to the last part of the bar and fail. Every single time. I really could do with some help on this one. Please.Take a look at this link, http://support.apple.com/kb/HT1414 It's look like your iPhone needs to be repaired, the digitizer is damaged and it could be causing the problem of not letting your iPhone completely restore. Take your iPhone to your nearest Apple store.
-
when i turn on itunes, it crashes automatically with the error message saying "itunes has encountered a problem and needs to close." I've tried reinstalling itunes but its the same. CAN SOMEONE PLEASE HELP!!!
Try:
iOS: If you can't back up or restore from a backup in iTunes -
Has anyone had problems with upgrading iPhoto? I am, it stops at 5 of 9 and just stays there and won't finsih. Can someone please help me out?
iphoto upgrading: Apple Support Communities
iphoto upgrade hangs: Apple Support Communities -
IMovie exporting problem! Please someone help, I have a deadline.
Hello, I've been having a problem with exporting my movie to my camera roll. I recently filmed a wedding video and started editing it on iMovie for iOS because i'm most comfortable with this program.
I edited the beginning and wanted to export the 3 min part to my camera roll so i could later add speeches to it. The loading keeps getting stuck at the same spot not even half way. I'm currently running the latest software iOS 7.1.1 on an iPad 3 32gb. I cleared some extra space which left me with 3.2 GB and I still experienced the stopped loading bar. I tried turning it off and on closing the app completely and it didn't help one bit. I'm not deleting it because I will have to start all over and my deadline is at the end of July. Someone Please Help! My support has expired from apple and $20 is way to much for a small problem like this. I would appreciate some help on "saving" this couples wedding video!You you can layer in the speeches, from audio or from another video without losing the background sound. You can also adjust the volume of the fore and background sound to get the right blend.
the instructions are a bit hard to follow, but I was able to layer a vocal only, from one video clip, over the another clip at the point I selected. I was also able to adjust the volume to balance the sound to my liking.
these instructions are available within the app....
Add just the audio from a video clip
With your project open, scroll the timeline so that the playhead (the white vertical line) appears where you want to add the audio clip.If the playhead is resting over an existing clip, the new clip is added either before or after the existing clip, whichever is closest to the playhead.
Tap Video on the right above the timeline.All your video clips appear in the media library above.Note: If your iPad is in portrait orientation, first tap the Media Library button in the upper-right corner, then tap Video at the bottom of the media library.
In the media library, do any of the following:
To preview a clip before adding it to your project: Tap to select a clip, then tap the Play button .You can also swipe your finger left and right over a clip to manually preview it, which can help you identify exactly which part of the clip you want to use.
To sort clips by date: Tap the disclosure triangle at the top of the media library, then tap Oldest First or Newest First.
To show only unused or favorite clips: Tap the disclosure triangle at the top of the media library, then tap Favorites or Unused.If you want to mark a clip as a favorite, tap “Find more favorites” and follow the instructions in Review and share video clips.
In the media library, tap the video clip, then tap the More Options button .
Tap the Audio Only button . -
Dear Friends, I am trying to draw a structure in Adobe Illustrator with 3D effect. But I am unable to give it proper shape. Can someone please help me for drawing the similar structure as showed below. I have facing problems in giving 3D effect.
Thanks a lot for your great help...i made a quick example:
and what it's made of:
just shapes and gradients. used a combination of pathfinder and shape builder to get the shapes exact. -
I was using my SanDisk Cruzer 4GB today and I ran into problems. Can someone please help?!
When I was using my SanDisk Cruzer 4GB today I ran into some problems.
I was using it normally as I have been doing for 1 year and suddenly this message came up:
"Because your USB device is drawing too much power it has been disabled." Then my USB crashed...
I have tried plugging it back in, and it didn't work, I have tried Safe Boot-ing my computer, but still no result, nothing works.
When I plug my mouse into the same slot, but that does work. So do my USB headphones.
Can someone please help me, and don't suggest buying a new USB stick.
P.S. I need help A.S.A.P because I need to have a school project done and my work is on my SanDisk Cruzer 4GB.
LucasIt sounds like it is hosed. I hope you have a backup. The only thing I can suggest is to test it in a different computer.
This link is to a previous discussion regarding San disk Cruzer USB thumbdrives
https://discussions.apple.com/message/8700070#8700070 -
Hi, i had recently bought a toshiba 3.0, 1.5tb hdd and i had to change the settings through Disk Utility on my mac to be able to transfer files from my mac to my HDD. The problem i am having now is, it wont connect to my TV or PS3? Can someone please help
"....and i had to change the settings through Disk Utility on my mac to be able to transfer files from my mac to my HDD"
What do you mean by that? Did you format? -
I'm getting the run-around. Can someone please help me with a rebate problem?
I purchased a Samsung W/D from Best Buy with the free vacuum offer. It was delivered and I submitted my rebate request. The submission page said to wait 6 to 8 weeks for processing. I waited 8 weeks and then became concerned. When I called the rebate center they said they had no record of my submission. Obviously, the online process failed. I understand technology doesn't always work, but the operator and manager told me I would now not be able to get my rebate and only offered a mailing address to complain. I am EXTREMELY frustrated. First, because the only reason I purchased these units was for the rebate and now I cannot return them to Best Buy because of the time elapsed. Second, if I was aware that there was a problem with the submission I would have been able to fix the situation. The website said all was OK, and all the information said to wait 6-8 weeks. Why would I have checked in before that time? Now I'm told I'm too late to fix it??? All I want is the vacuum cleaner I was promised when I purchased the W/D. Can someone please help me?
Hello ChadMelton,
I have a hard time passing up offers for free products, so I understand how such an offer could influence your decision to buy. I'm wholly disappointed to read, though, that your rebate experience didn't go smoothly and that the manufacturer seems to have been less than cooperative. I would be frustrated too under such circumstances!
I was unable to locate your purchase using the information you provided when you signed up for Best Buy Unboxed. I would like to look into this situation on your behalf, but will need more information to begin. If you will please send me a private message that includes your full name, telephone number, order number and/or the Customer Service PIN from your purchase receipt, I'll get started.
I'm very grateful that you wrote to us with your concerns.
Sincerely,
Maybe you are looking for
-
Using LMS is there a way to run a job which would extract the VRF name in part of the configuration and then use it as a variable to deploy additional configuration using the VRF name. We have a number of management VRF's and need to deploy a mass co
-
HT4623 how to back up data in iphone4s to pc
I need your know how to back up my files in Iphone to my notebook. Thank you.
-
JEditorPane word wrap problems
I am using a JEditorPane in a chat window that is used, like instant messenger, between two clients. The ability to insert icons and different fonts is available after setting the editor kit to an HTMLEditorKit. However, after using an HTMLEditorKit,
-
Why my preview keeps freezing when I make several underlines in pdf file?
Why my preview keeps freezing when I make several underlines in pdf file? It keeps saving and freezing.
-
I cannot figure out how to Download a Youtube video. HELP
I do not want to try some third party BS (Perian, iskysoft, etc...) However, I am seeing others on this site explain how to download a video from Youtube using either Safari or Firefox, but I really can't figure it out and I am very frustrated. I am