Strange telnet behavior with MDS switch and OSX

I am running OSX 10.6, and noticed the following with SAN-OS 3.3. It like automatically sends the logname with the telnet request (I think), so it prompts you for password, then you just hit return and can get a login prompt and login. The reason I say it sends the LOGNAME is because if I look at ACS its showing that's what is being sent. Could be an OSX thing but I just found it wierd. Incidently I can login to some Cisco routers from my OSX box and i don't have this happen, so something between OSX and MDS.
Cluebox:~ bfeeny$ telnet 172.16.3.151
Trying 172.16.3.151...
Connected to 172.16.3.151.
Escape character is '^]'.
Password:
Login incorrect
MDS1 login: admin
Password:
Cisco Storage Area Networking Operating System (SAN-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software may be covered under the GNU Public
License or the GNU Lesser General Public License. A copy of
each such license is available at
http://www.gnu.org/licenses/gpl.html and
http://www.gnu.org/licenses/lgpl.html

Similar Messages

Strange highlighting behavior with Library books and reinstall?

I have a Nook Color and Windows 7. B&N has exchanged my Color Nook twice ....but .............I am beginning to think that the problem is with ADE or something else.
When I am reading a Library book, about 10 to 15 minutes into the book, I will get some word/words highlighted in the "lookup" form...and then the menu appears. I can't actually look up a word...the Nook just freezes. I put the Color Nook to "sleep", turn it back on, and all is well for about another 10 minutes.
This is happenning with multiple libraries in different states. So......either it is a glitch in my installation of ADE or it is a problem that the libraries are having.
I was wondering if anybody else has had this issue. I don't get any error messages when I download a book.
I am thinking that I need to reinstall ADE...but am not sure if I will end up getting myself into more trouble. I also have ADE on my Netbook (rarely use it). I am concerned that I will use up all my "devices" trying to uninstall and reinstall.........and don't know if that will fix the issue.
Also, WHAT HAPPENS IF YOU FORGET YOUR PASSWORD? Is there a recovery function at ADE?
Thanks for the help

Hi! It sounds like you have set up your Nook and ADE so that they work
together and with library software. And if you can read other ebooks that
aren't from a library on your Nook, then it's probably not a setup issue.
So, I am thinking that the issues you're having deal with something in the
ebooks themselves.
ADE just copies the text from the source location to its library. ADE does
not edit or change the text in any way. Library book software can do certain
things with the 'tag' file that contains publishing rights. Chief among
them is to set a time and date for expiration of the loan. If your computer
or Nook clock does not display the same time and date, it's possible that
the information from the library is getting screwed up so that the Nook
shuts down the ebook. So, the first thing I'd suggest is to check the time
and date settings in both places. It would be interesting also to try and
read the ebook on your computer via ADE and see if the same problem occurs.
You could contact the library help desk and get information on what software
they're using - that might point to an issue in it if it's the same software
at multiple libraries from which you've downloaded ebooks.
Hope this helps!
============

Strange window behavior with CS5

I have begun experiencing strange behavior with PS CS5. I should begun with the machine configuration: 2.66GHz iMac (8,1) Intel Core Duo with 4GB RAM and OSX 10.6.6, Radeon HD 2600 Pro graphics card. The initial symptom showed up suddenly as an inability to display an image window; that is, I could open PS normally, everything would show up properly, but when I opened an image file of any sort, there would be no image window. Other cues indicated that the file was open; for example, the window menu would show it selected, and the layers palette would show the file's layers.
It did not seem to matter what type of file was involved: PSD, JPG, TIF, whatever. Occasionally, this behavior would begin during a session. Sometimes it would happen right off the bat. Sometimes, stopping and restarting PS seemed to clean things up; other times, this had no effect. After messing around quite a bit with different permutations and combinations, all I could say was that the problem was random.
I might add that I've had PS CS5 on this machine pretty much since it was announced, and had not had problems with it before. So this issue came along quite suddenly a couple of weeks ago. This was a little after I'd installed an update for Nik's Viveza 2; and I began to suspect that. Although why Viveza should do such a strange thing was odd, and Viveza was never part of the files I was experiencing issues with. Anyway, I went back to an earlier version of Viveza and the problem persisted.
Since I run Time Machine, I also went back to versions of the entire PS folder from a month back, and found the same problem. Along the way, I experimented with the files I was using with PS CS4 & CS3, which I also have installed on this machine. These two versions of PS run perfectly well. At least the CS4 version has precisely the same plugins as the CS5 folder, and this seems to discount the potential problem with plugins.
To be sure about CS5, I completely deactivated, deinstalled, and reinstalled it. The same issues occurred. Now, I have to admit that I let PS run its update process so that I brought it back to the most recent version in this step of my troubleshooting. So, I can't be certain that the issue isn't with some update of CS5.
I might add that I have been running CS5 in 32-bit mode, for compatibility with certain plugins. This may or may not be an issue, since I have limited experience with running in 64-bit mode. At this point, I should add a bit more about the confusing behavior.
While messing around with CS5, I also suspected the GPU support, since my problem had to do with windows. When the problem presents itself, the usual cycle through window views that you get by pressing the "F" key seems to get messed up. In particular, the "F" key doesn't work at all. Next, if you use the View menu to select different views, the full screen with menu bar view will often have garbled pixels, while the full screen view will show a blank grey screen. Then, cycling back to a window view will show a window with blank grey contents. This is interesting since the starting point was no window at all; but going into full screen and then back will produce a window with bogus contents.
Now, the next strange thing, having to do with the GPU, is that CS5 often fails to recognize the Radeon HD 2600 card. Oddly enough, it did originally. And I had it running in Basic mode. However, CS4 does recognize the GPU; and I can set it in any variety of modes: Basic, Normal, and Advanced. This behavior is not consistent at all either; that is, while CS5 almost always now fails to detect the GPU, sometimes it does. As near as I can tell, this failure to detect the card does not depend upon whether I start CS5 in 32-bit or 64-bit mode. OTOH, CS4 always recognizes the GPU.
Another form of this odd behavior arises if I start CS5 cold, and then just open a new blank window. This almost always works. I get a blank white window, and I can paint on it with a brush, etc. However, if I go ahead at this point and open a file, then the new file takes over the window; and there are no tabs. If I select the original new file, usually labelled "Untitled", the window bar will show the change of filename but the window's contents and the layers palette will continue to show the old file that I had opened. Cycling through views can sometimes get back to the new Untitled file, but just selecting file windows never works.
Yet another aspect of this messed up window behavior is that the workspace bar, which shows the Bridge, MiniBridge and view icons on the upper left and the various workspace options and CS Live on the upper right, is present but blank. OTOH, the tool bar is always displayed correctly, as is the horizontal bar that shows the various tool options. Likewise, the palettes for the workspace such as layers, swatches, adjustments, and so on, are always correctly displayed on the left.
My next steps in trying to figure this out will be to ensure that I am running the latest of all plugins so that I can get everything running in 64-bit mode and try this again. However, the single factor that seems consistent in this whole mess is that whenever I do find this odd behavior, the performance preferences window will indicate that CS5 is not detecting the GPU. Whenever this happens, if I open up CS4 and check the same performance preference in it, the GPU is detected. I can have the two preference windows side by side on the screen in fact, CS4 sees the GPU and CS5 does not. The counter-indication is that sometimes CS5 will work properly and the preferences window still shows that the GPU has not been detected. Having said that, I can add that if I have opened up CS5, and it has found the GPU, and I have set it into, say, Basic mode, and then later found CS5 messing up, and I go back and check the performance preferences again, the GPU has always been lost. So, CS5 can mess up windows with or without the GPU detected and active; but when if it started with the GPU present, it will show up as lost after the weird behavior starts.
To add one more observation, I have had Macs and other computers with failing GPUs. This computer is showing none of the typical signs of that. Every other program seems to be working just fine, and I have a lot of these, many graphics intensive; e.g., Corel Painter 11, Parallels v6 running Windows 7, PS CS4, Lightroom v3, Aperture v3, and so on. It is just CS5 that is messing up.
I could load up this message with screen shots of all this nonsense, but I'm not sure what that would add to the strange tale, other than I'm not pulling your legs. I am, however, pulling out my own hair.
As I stated before, this began quite suddenly a couple of weeks ago, early Feb 2011. My best guess as to cause is some combination of incompatible updates between CS5, OSX, and maybe some plugin or other. I found unusual behavior with onOne's FocalPoint v2 last year after Apple updated GPU drivers in some OSX update, and cratered that program. It took onOne a month or two to fix that. I have CS5 on a laptop with the same OSX version, and on that I haven't seen these issues; but then, I haven't been using it as intensely over there. Also, that machine has different CPU and GPU models than this iMac.
So, to the community: is anybody else starting to see this odd stuff? Am I alone?

Here's the reason I say that the same plugins exist for both CS4 & CS5. Sometime last year, the internal hard drive on this computer died (as they so often do), and it was replaced under the Apple care warranty. As a consequence, I decided to rebuild the OS and applications from scratch and bring back my user files from backup. I among other things, I reinstalled all of CS4 as well as CS5 (and I had to put CS3 back too for reasons having to do with printing calibration images for Quad Tone RIP). Then, I went to reinstall the plugins that I needed. I use Nik Software, onOne, Portrait Professional and various Topaz plugins. To my recollection, most of these install in PS CS3, CS4, CS5, Aperture, and Lightroom. In short, it is not that I've copied or moved plugin folders from one application folder to another, just that the installers automatically detect the presence of the various applications and put the various plugins into each, as appropriate.
The only 32-bit plugins that I have that don't fit into this category are from Vincent Versace. He provides special versions of certain Nik plugins (Tonal Contrast, Contrast Only, etc) that function with some Acme Educational extensions for performing B&W conversion, sharpening, blah blah blah. These plugins are only 32-bit and the extensions are only CS5 compatible. I've installed these ones only into CS5; so, you've got me. OTOH, I've had these from Vincent as soon as CS5 was available; and they've worked so far without problems. Perhaps I should just edit the extensions so I could use the latest plugins direct from Nik instead of the Versace special editions...
I've checked fonts and repaired permissions. I am presently going through the rather tedious process of disabling plugins and extensions to see if anything yields consistent results. The rather random arrival of the strangeness makes ensuring that a change is really having an effect more difficult to validate, as you will appreciate.
I apologize for my long-winded original post. I add all of the detail so that anyone who'd experienced similar strange behaviors might properly pattern-match what they were seeing. On the one hand, in finding the cause of a problem, you look for what's changed; and theoretically nothing is new. On the other hand, there's always so much changing behind the scenes with automatic updates of this, that, and the other thing that it's impossible to make the claim that nothing's new.

Strange Permissions Behavior with Public/Private Drop Box

Strange Permissions Behavior with Non-Course Drop Box
In an effort to promote iTunes U on campus this semester (and to get people working with audio and video more) we're having a contest in which people can submit personal or group audio/video projects.
This being an iTunes promo, we intend for students to submit their contributions via a drop box.
To that end, I began experimenting with drop boxes in iTunes U, which I haven't done much of previously. I've created a course called "iTunes U Drop Box Test" under "Campus Events". Within that, I have two tabs: "Featured Submissions" and "Dropbox". My goal with this drop box was to allow faculty, students and college folks the ability to use the drop box ("college" being a role I've defined for those who don't fit into the faculty/student roles).
When I first started experimenting, access to the "iTunes U Drop Box Test" course looked like this:
--- Credentials (System) ---
Edit: Administrator@urn:mace:itunesu.com:sites:lafayette.edu
Download: Authenticated@urn:mace:itunesu.com:sites:lafayette.edu
Download: Unauthenticated@urn:mace:itunesu.com:sites:lafayette.edu
Download: All@urn:mace:itunesu.com:sites:lafayette.edu
--- Credentials ----
Download: College@urn:mace:lafayette.edu
Download: Instructor@urn:mace:lafayette.edu
Download: Instructor@urn:mace:lafayette.edu:classes:${IDENTIFIER}
Download: Student@urn:mace:lafayette.edu
Download: Student@urn:mace:lafayette.edu:classes:${IDENTIFIER}
For the "Featured" Submissions tab, I gave the non-system credentials the "download" right, and for the "Dropbox" tab I gave the non-system credentials the "dropbox" right.
My understanding of this setup is that everyone should have had the ability to view the course and the contents of the "Featured Submissions" tab and that those in the College/Instructor/Student roles would be able to upload files via the "Dropbox" tab ... but not see the contents of said tab after the files were uploaded (aside from any files they uploaded themselves).
This is not the behavior we saw however. While the College/Instructor/Student roles could upload files to the dropbox, everyone (including the unauthenticated public) was able to see all of the contents of the dropbox.
The only way I could get this to work as advertised was to change all of the system credentials save the "Administrator" to "No Access":
--- Credentials (System) ---
Edit: Administrator@urn:mace:itunesu.com:sites:lafayette.edu
No Access: Authenticated@urn:mace:itunesu.com:sites:lafayette.edu
No Access: Unauthenticated@urn:mace:itunesu.com:sites:lafayette.edu
No Access: All@urn:mace:itunesu.com:sites:lafayette.edu
Once I did this, everything worked as advertised: College/Instructor/Student roles could upload tracks, and the "Dropbox" tab would only display tracks they uploaded.
So my question is ... is this the correct behavior for the drop box? It looks like when the system credentials are in play, they're simply overriding whatever the normal "view" rule is for the drop box, which doesn't seem right.

Your current configuration where things work as you wanted does seem correct to me. You are not using any System Credentials to accomplish the functionality and that's fine.
Here's some more info to clarify how / why this is working for you and why you had to set "No Access" for the System Credentials:
The System Credential "Authenticated@..." is going to get assigned to any user that goes through your transfer script. Even if you transfer script assigns no credentials to a user, upon entering iTunes U they will have at least 1 - the "Authenticated@..." credential. Therefore, unless you block access using "No Access", any user that passes through your transfer script is going to be able to access the area in question.
When you change values for "Unauthenticated@..." or "All@..." you are defining what someone that DOES NOT pass through your transfer script can do. You want both of those to be "No Access" at the top level of your site if you do not want unauthenticated visitors.
The distinction between "Unauthenticated" and "All" is that "All" applies to all users whether they pass through the transfer script or not.
Here's another way to remember things:
User passes through your transfer script, iTunes U automatically assigns:
Authenticated@....
All@....
User does not pass through your transfer script and instead access your iTunes U site through derivable URL*, they get assigned:
Unauthenticated@....
All@....
*The derivable URL for a site is: http://deimos.apple.com/WebObjects/Core.woa/Browse/site-domain-name
Mac OS X (10.4.6)

Not Working-central web-authentication with a switch and Identity Service Engine

on the followup the document "Configuration example : central web-authentication with a switch and Identity Service Engine" by Nicolas Darchis, since the redirection on the switch is not working, i'm asking for your help...
I'm using ISE Version : 1.0.4.573 and WS-C2960-24PC-L w/software 12.2(55)SE1 and image C2960-LANBASEK9-M for the access.
The interface configuration looks like this:
interface FastEthernet0/24
switchport access vlan 6
switchport mode access
switchport voice vlan 20
ip access-group webauth in
authentication event fail action next-method
authentication event server dead action authorize
authentication event server alive action reinitialize
authentication order mab
authentication priority mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
spanning-tree portfast
end
The ACL's
Extended IP access list webauth
    10 permit ip any any
Extended IP access list redirect
    10 deny ip any host 172.22.2.38
    20 permit tcp any any eq www
    30 permit tcp any any eq 443
The ISE side configuration I follow it step by step...
When I conect the XP client, e see the following Autenthication session...
swlx0x0x#show authentication sessions interface fastEthernet 0/24
           Interface: FastEthernet0/24
          MAC Address: 0015.c549.5c99
           IP Address: 172.22.3.184
            User-Name: 00-15-C5-49-5C-99
               Status: Authz Success
               Domain: DATA
       Oper host mode: single-host
     Oper control dir: both
        Authorized By: Authentication Server
           Vlan Group: N/A
     URL Redirect ACL: redirect
         URL Redirect: https://ISE-ip:8443/guestportal/gateway?sessionId=AC16011F000000510B44FBD2&action=cwa
      Session timeout: N/A
         Idle timeout: N/A
    Common Session ID: AC16011F000000490AC1A9E2
      Acct Session ID: 0x00000077
               Handle: 0xB7000049
Runnable methods list:
       Method   State
       mab      Authc Success
But there is no redirection, and I get the the following message on switch console:
756005: Mar 28 11:40:30: epm-redirect:IP=172.22.3.184: No redirection policy for this host
756006: Mar 28 11:40:30: epm-redirect:IDB=FastEthernet0/24: In epm_host_ingress_traffic_qualify ...
I have to mention I'm using an http proxy on port 8080...
Any Ideas on what is going wrong?
Regards
Nuno

OK, so I upgraded the IOS to version
SW Version: 12.2(55)SE5, SW Image: C2960-LANBASEK9-M
I tweak with ACL's to the following:
Extended IP access list redirect
    10 permit ip any any (13 matches)
and created a DACL that is downloaded along with the authentication
Extended IP access list xACSACLx-IP-redirect-4f743d58 (per-user)
    10 permit ip any any
I can see the epm session
swlx0x0x#show epm session ip 172.22.3.74
     Admission feature: DOT1X
     ACS ACL: xACSACLx-IP-redirect-4f743d58
     URL Redirect ACL: redirect
     URL Redirect: https://ISE-ip:8443/guestportal/gateway?sessionId=AC16011F000000510B44FBD2&action=cwa
And authentication
swlx0x0x#show authentication sessions interface fastEthernet 0/24
     Interface: FastEthernet0/24
     MAC Address: 0015.c549.5c99
     IP Address: 172.22.3.74
     User-Name: 00-15-C5-49-5C-99
     Status: Authz Success
     Domain: DATA
     Oper host mode: multi-auth
     Oper control dir: both
     Authorized By: Authentication Server
     Vlan Group: N/A
     ACS ACL: xACSACLx-IP-redirect-4f743d58
     URL Redirect ACL: redirect
     URL Redirect: https://ISE-ip:8443/guestportal/gateway?sessionId=AC16011F000000510B44FBD2&action=cwa
     Session timeout: N/A
     Idle timeout: N/A
     Common Session ID: AC16011F000000160042BD98
     Acct Session ID: 0x0000001B
     Handle: 0x90000016
     Runnable methods list:
     Method   State
     mab      Authc Success
on the logging, I get the following messages...
017857: Mar 29 11:27:04: epm-redirect:IDB=FastEthernet0/24: In epm_host_ingress_traffic_qualify ...
017858: Mar 29 11:27:04: epm-redirect:epm_redirect_cache_gen_hash: IP=172.22.3.74 Hash=271
017859: Mar 29 11:27:04: epm-redirect:IP=172.22.3.74: CacheEntryGet Success
017860: Mar 29 11:27:04: epm-redirect:IP=172.22.3.74: Ingress packet on [idb= FastEthernet0/24] matched with [acl=redirect]
017861: Mar 29 11:27:04: epm-redirect:IDB=FastEthernet0/24: Enqueue the packet with if_input=FastEthernet0/24
017862: Mar 29 11:27:04: epm-redirect:IDB=FastEthernet0/24: In epm_host_ingress_traffic_process ...
017863: Mar 29 11:27:04: epm-redirect:IDB=FastEthernet0/24: Not an HTTP(s) packet
What I'm I missing?

Has anyone deployed converged access with 3850 switches and 5760 WLCs?

Has anyone deployed a converged access network architecture with 3850 switches and 5760 WLCs? I have done lots of projects with the 5508 WLCs In a centralized deployment. Basically with this design, I manage 2 logical networks as the wireless network is an overlay over the wired network. I can design firewall to segregate traffic between the wired and wireless hence I can carry both staff and guest traffic.
Now Cisco is telling us that there is new design such that the dats plane traffic can be dropped locally through the 3850 switched. I am not sold on this and have not found any recommended best practices on when should we use a converged access architecture.
Pros
With converged access, data traffic is terminated at the MA which is on the switches, hence the WLC will not be a bottleneck? This is to prepare adoption for 802.11ac?
Less hops for voice calls from user A to user B as data control traffic is dropped locally.
Cons
Now how do I segregate guest and staff traffic if my security folks say I need a firewall?
Troubleshooting wireless client mobility will be a nightmare as the 3850 switches are MA.
Pushing and upgrading code for the Code will mean upgrading the stack of switches in the LAN riser. This will be painful in a huge campus environment like an university.
Can someone convince me why would a customer choose converged access?
Sent from Cisco Technical Support iPad App

They choose CA because of the capwap termination at the switch. You can still use a 5508 and tunnel guest to a DMZ segment if you wish. You will need a 5508 though is you want to tunnel traffic to an anchor WLC.
Sent from Cisco Technical Support iPhone App

Creative Zen Micro 6GB/Problems with Power Switch and Firmw

The power switch on my Zen Micro has died. I can't turn it on or off unless I 'jump start' it from a USB cable and leave it alone to go into idle shutdown. I've had this player just three weeks and this is happened and frankly I'm disgusted. But wait, my story get's worse:
So before sending it back to Creative I thought that I should at least exhaust every possible cure. First on my list? A Firmware upgrade to v2.22.05. I downloaded the program and set about installing the new firmware but halfway through the process it hung and I had to end it prematurely. Now what I had was a ZM that apparently had v2.22.05 but was not being recognised at all by my computer. Media Explorer wasn't picking up on it and neither was WMP although strangely when I connect the device it's there in the Device Manager...
So, check back with the website and it said to download an update for Mediasource and that should solve the problem. Downloaded the patch but then realised that I hadn't installed Mediasource on my computer (can't remember why I didn't though). Went back to the downloads page and downloaded Mediasource. Tried to install it but I can't. The reason? because my computer isn't detecting the ZM and I can't install it until it recognises that it's there.
As a last resort I thought that I would try to use 'Rescue Mode'. Seemed simple enough, remove the battery and hold down the power switch. Then put the battery back in and wait for the rescue screen to come up. Seems easy enough. Oh wait, I don't have a working power switch.
What I do have though, is a small piece of plastic and metal that I can't turn on, can't turn off, can't put any songs on, can't listen to, can't fix and can't be bothered with. I have a ?60 paperweight.
Anyone at all have any idea what I should do? I just want to put it all in a box and send it back to Amazon with a request for a full refund or a threat to take them to the Small Claims Court.

Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

Problems with SRW224G4 switch and Bridged Network Cards

Hello,
We have recently installed a SRW224G4 switch and have discovered that when we plug our DELL PowerEdge 2900 server into the switch, the switch loses all network connectivity and all of the LED's on the switch start flashing.
The server works perfectly well plugged into another switch, but as soon as we introduce the SRW224G4 into the network, either with the server plugged into that switch or any other, the problem re-occurs.
The only way we found we could eliminate this issue was if we disabled the Bridged Network connection on the two network cards on the server. If we do that, everything is fine, except the network performance of the server has dropped significantly.
The server is plugged into the 1GB ports on the switch, although we tried it on the 100MB ports and received the same problems. The switch reports that the ports are running at full-duplex.
Has anyone noticed this behavior before, and more importantly been able to rectify it.
Thanks in advance for your assistance,
Paul

I had this problem as well with any Linksys 2024 or rackmountable switch.. The trick is, you need to use the network cards management software to "team" or bridged the 2 NIC's otherwise the switch detects a loop and the whole thing locks up. So lame... Windows built in bridge mode stinks dont use it. When you use the Intel management software or Dell or HP's NIc management software you have the option to actually choose "redundant mode" where you can pick a Nic to be the primary, or you can choose Load Balancing where you can essentially double your throughput by joining the 2 nics.
In Windows 2008 Server, you actually do this by going to the Properties on the NIC in Device Manger. the software controls are now built right into the driver. pretty neat. 2003 you can check Device Manager the same way but not sure if it's the same as 2008, you might need to run the actual NIC management app.
Hope this helps
fdigi

Weird Behavior with Macbook pro and 30" screen

When trying to iSync my phone via Bluetooth my Bluetooth mouse takes on strange sluggish behavior and makes it virtually unusable. At this point I’ll flip open the lid on the Mac book and use the track pad. When I shut the lid again I lose the picture on the big screen only for it to return some seconds later when I hit the Bluetooth keyboard the picture comes back then after 5-6 seconds disappears. It’s almost like it get’s stuck in some sort of hibernation cycle mode.. The only way to solve it , so far is to open the lid and restart then close the lid before it boots up again. The exact same thing happens if I unplug the power cord. Sometimes as happened today you open the lid and nothing , you actually have to flip the battery out for a moment then reboot as above.
Providing I don’t open the lid or remove the power cord the computer and display work just fine
I’m guessing there is something I can do in the settings, but I’m not sure what it is. But as you can imagine it’s a real pain
Any pointers or ideas would be welcome and any explanation as to why the mouse goes nuts when I establish a connection between the computer and the phone( The sluggishness remains even after I’ve closed Bluetooth on the phone)
Thanks
Symon

Dang, I assume correctly that it doesn't work as advertised for you? I have a MacBook 13.3-in with a Dell 20-in display attached as extended desktop and when I pan, I eventually can only zoom in to the bottom of the screen. I can only pan horizontally.
Not as advertised at all I hope someone can fix that.

Branch office setup with L3 switch and router with IOS security

Hello,
I am in the process of putting together a small branch office network and I am in need of some design advise. The network will support about 10-15 workstations/phones, 3-4 printers, and 4-5 servers. In addition we will eventually have up to 25-30 remote users connecting to the servers via remote access VPN, and there will also be 2-3 site-to-site IPSec tunnels to reach other branches.
I have a 2911 (security bundle) router and 3560 IP Base L3 switch to work with. I have attached a basic diagram of my topology. My initial design plan for the network was to setup separate VLANs for workstation, phone, printer, and server traffic. The 3560 would then be setup with SVIs to perform routing between VLANs. The port between the router and switch would be setup as a routed port, and static routes would be applied on the switch and router as necessary. The thought behind this was that I'd be utilizing the switch backplane for VLAN routing instead instead of doing router-on-a-stick.
Since there is no firewall between the switch and router my plan was to setup IOS firewalling on the router. From what I am reading ZBF is my best option for this. What I was hoping for was a way to set custom policies for each VLAN, but it seems that zones are applied per interface. Since the interface between the router and switch is a routed interface, not a trunk/subinterface(s), it doesn't seem like there would be a way for me to use ZBF to control traffic on different VLANs. From what I am gathering I would have to group all of my internal network into one zone, or I would have to scrap L3 switching all together and do router-on-a-stick if I want to be able to set separate policies for each VLAN. Am I correct in my thinking here?
I guess what I am getting at is that I really don't want to do router-on-a-stick if I have a nice switch backplane to do all of the internal routing. At the same time I obviously need some kind of firewalling done on the router, and since different VLANs have different security requirements the firewalling needs to be fairly granular.
If I am indeed correct in the above thinking what would be the best solution for my scenario? That is, how can I setup this network so that I am utilizing the switch to do L3 routing while also leveraging the firewall capabilities of IOS security?
Any input would be appreciated.
Thanks,
Austin

Thanks for the input.
1. I agree, since I have only three to four printers, they need not be in a separate VLAN. I simply was compartmentalizing VLANs by function when I initially came up with the design.
2. Here's a little more info on the phone situation. The phones are VoIP. The IP PBX is on premise, but they are currently on a completely separate ISP/network. The goal in the future is to converge the data and voice networks and setup PBR/route maps to route voice traffic out the voice ISP and data traffic out the other ISP. This leads up to #3.
3. The reason a router was purchased over a firewall was that ASA's cannot handle routing and dual ISPs very well. PBR is not supported at all on an ASA, and dual ISPs can only be setup in an active/standby state. Also, an ASA Sec+ does not have near the VPN capabilities that the 2911 security does. The ASA Sec+ would support only 25 concurrent IPSec connections while the 2911 security is capable of doing an upwards of 200 IPSec connections.
Your point about moving the SVI's to a firewall to perform filtering between VLANs makes sense, however, wouldn't this be the same thing as creating subinterfaces on a router? In both cases you are moving routing from the switch backplane to the firewall/routing device, which is what I am trying to avoid.

"Run Script" (F5) Flacky Behavior with CREATE PROCEDURE and PACKAGE

When I have the following create statement in a SQL Worksheet and run the script using "Run Script" (F5), I get the "PROCEDURE bogus Compiled." message. Why does it not tell me that there was a compile error? The procedure is marked with a little red "X" in the connections pane.
CREATE OR REPLACE PROCEDURE bogus IS
BEGIN
x := 1;
END;
/Also, when I have the following command in a SQL Worksheet and run the script using "Run Script" (F5), I get the "PROCEDURE bogus Compiled." message. The difference is that I removed the slash after the CREATE PROCEDURE command. I can go into that procedure in the database via the Connections pane, click on the compile button, and the procedure compiles with no errors. Why does it not compile in a script when missing the slash?
CREATE OR REPLACE PROCEDURE bogus IS
BEGIN
NULL;
END;I noticed the same flaky behavior with CREATE PACKAGE BODY as well. This is in version 1.0.0.14.67 on Windows XP. Has this been fixed in the latest version?
Mike

I found a number of earlier posts on this (going back to at least v804), but I cannot find a thread with a response from the SQL Developer team - see:
Package compilation error
Succesful compilation message and Compiling Invalid Objects
Creating a stored procedure from a file does not show compilation errors
Re: Syntax Error Feedback
I assume that it is just a bug with SQL Developer that it does not check for compilation errors when determining the status message to display (ie "PROCEDURE bogus Compiled"). At least now we get the little red cross on the navigator to tell us it is invalid :)

Strange new problem with external effects and latency compensation

i'm currently facing a new , very strange problem with latency compensation for external effect devices. it alway worked fine for me but suddenly there are strange things going on. i'm suddenly running into problems when using sends which feed auxes going to external effect devices.
latency compensation is set to ALL !!!
easy setup :
- open an empty project and create 2 audioinstrument tracks. on the first one load the exs with a drumkit and record f.e. a bassdrum pattern. leave the 2. instrument empty.
- now on the first audio instrument create a send to bus 1 -> aux 1 and insert the i/o plug-in in the aux and route it to your external effect device. chose a temposynced delay.
- press play = everything is fine when audioinstrument 1 is highlighted in the arrange.
- press stop, click on the track with the 2. audioinstrument and press play = totaly weird timing problems. delay is only in sync when track 1 is highlighted.
- create a send in the 2. audioinstrument and route it to bus 1 -> aux 1 too = still the same problem
now insert ANY softwareinstrument in audioobject 2 and suddenly the timing for the delay is right.
go ahead and create a 3. audioinstrument track but leave it empty first. chose it in the arrange = again weird timing problems with the external delay.
insert any software instrument on audioinstrument 3 = still the same problem
now create the send to bus 1 -> aux 1 in audioinstrument 3 and guess what, timing is right.
*** is going on here ? can anyone reproduce that ?
it works fine when using sends which feed auxes with software effects inserted.
funny thing is, when i go to the environment and change aux object one to bus object 1 and insert the same i/o in it it works !!!
very very strange, please tell me i'm not crasy and this is a bug !!!
as said, latency compensation is set to all.
i'm using the mac pro 3.2 8-core running os 10.5.4, logic 8.0.2 and a motu pci-e audio system.
Message was edited by: Olaf Dieckmann

Welcome to the Discussions.
If you need it formatted FAT32, reformat it on your Mac. Use MS-DOS (FAT32) as the file system. If you don't need it for both PC and Mac, format it HFS+ and you'll be able to use the Retrospect Express software that came with it on your Mac.
John

Sync OSX Reminders with Google task and OSX Notes with Android's Memo

Hi all!
I have recently moved to OS X and I was wondering if there is a way to sync Reminders with Google Task and Notes with Android's Memo. I can see the question has been asked in past for a different OS X (I'm on Maverick) but I couldn't find a solution that works.
I have currently my Calendar sync'ed with Google Calendar: if I choose "Accounts..." in Reminders I can tick "Mail", "Contacts", "Calendars", "Messages" and "Notes" but I can't see "Tasks".
Is there a way to set this?
Thanks in advance!

Cheers for that BikeMystery. So yeah, if you mainly use Google Services then the only way to get Reminders and Notes syncing between OSX ML and your iOS deviceis to activate Notes and Reminders under iCloud and create an @me address and an iCloud calendar. That's a bit pants really.
If you do have an Exchange or Yahoo! account set up in Mail, Contacts & Calendars does that allow Notes & Reminders to sync with iOS without iCloud?

Strange rendering behavior with AdvancedDataGrid

I'm getting strange (wrong) rendering behavior with a Flex datagrid... any idea what might be causing this? It only happened one time for me... but now I'm worried that customers might be seeing this from time to time.
Take a look:
http://www.screencast.com/t/ZWMwMzEzMG
-Josh

Can you log this issue with your application (or a similar sample file in which it is reproducible) here - http://bugs.adobe.com/flex/
-Sameer

ASM over HA SAN with FC-Switches and replication

Hello,
we have to install our first RAC and we have no idea how to handle shared storage with the requirement of high availability.
E.g. we have a HA SAN with two FC-Switches and a master-/slave storage configuration - is ASM able to manage this?
Can ASM manage disks in physically separated hardware (e.g. two disk arrays in different rooms) and mirror and striping over it?
Can the disks be of different types: e. g. disc array and normal discs and grouped together?
Any help is appreciated.
kind regards
Monika Anna

Hi Monika,
mschnatt wrote:
Hello,
we have to install our first RAC and we have no idea how to handle shared storage with the requirement of high availability.
E.g. we have a HA SAN with two FC-Switches and a master-/slave storage configuration - is ASM able to manage this?Yes... ASM can manage Luns Avaliable in Host.
Can ASM manage disks in physically separated hardware (e.g. two disk arrays in different rooms) and mirror and striping over it?Yes... ASM can do that
Can the disks be of different types: e. g. disc array and normal discs and grouped together?It is not recommended you have different disks (size and perfomance ) on same diskgroup , you can have serious performance problem.
See this...
http://download.oracle.com/docs/cd/E11882_01/server.112/e16102/asmprepare.htm#BABJHHEC
Regards,
Levi Pereira
Mark the replies answered "helpful" answer or "correct" answer that will help others with same problem. 
Thanks for doing your part to make this community as valuable as possible for everyone!

Strange telnet behavior with MDS switch and OSX

Similar Messages

Maybe you are looking for