Strange temp problems [Images]

When i start the computer the temp is idle at 50°
But when i do a restart the temp goes down to 35~°

Yep, this is the stupid windows cold boot problem. Reboot is the only way to fix it Just gotta live with it unfortunatley, it affects all A64 boards AFAIK.
Oh and MODS, love the new board

Similar Messages

Very Strange Internet Problems

I own a MacBook Pro 15.4 Inch that I purchased about a year and a half ago. I recently upgraded to Leopard and have all the latest updates. I am from the US, and when I am home my internet works fine. However, I am on travel to Seoul, South Korea right now and am having a very strange internet problem.
As far as I can tell, the URLs that I type in to my browser are, sparodially, not translated correctly into the webpages that they are supposed to represent. This problem is probably effective 75% of the time, and the rest of the time my internet works roughly correctly. For instance, when I enter http://www.google.com, instead of being taken to the Google homepage, I am taking to the homepage of Jammin Beats DJ Service, an obscure website about a company in northern Pennsylvania. The actual URL of this website is http://www.jamminbeats.com, but when my internet is malfunctioning, 'jamminbeats' is for all intensive purposes replaced by 'google' (that is, it applies not only to the main page, but to sub pages, so "http://www.google.com/weddings" takes you to "http://www.jamminbeats.com/weddings" and etc). For most other webpages, one of two things happens. Either I am taken to the correct page but it is displayed without any images or frames (just the html text and links), or I am taken to a blank page with the header "Under Construction", which I assume is the default for a page that doesn't exist. This is why it seems as though the URLs are simply being interpretted erroneously.
This problem occurs when connecting both to the wireless and the wired internet at my hotel, and it occurs on both Safari and Firefox, so it is not a connection-specific or browser-specific problem. It may be a problem with the hotel's internet, and as of yet I have not had a chance to test the computer at another location. However, a colleague using an IBM computer has had no problems, and I am currently on a Samsung machine in the business center of the hotel and it is working correctly as well. I have searched extensively online for a similar problem but have come up empty handed, and more than anything, I am confused about what might be causing this problem. The strangest thing is that a fraction of the time, the internet functions normally, but it is usually roughly 15 minutes out of every hour, and eventually I am inevitably taken back to Jammin Beats.
I am a computer science graduate but I still have no idea what would cause this problem. At first I thought it might be a hacker, but if it is, he or she has been at it consistently for 3 days now, and only seems to be targeting my computer. Any ideas or solutions would be greatly appreciated, as I have been forced to resort to the hotel's business center for checking email, doing work, etc. Thanks in advance.

I did consider that, as I was in Beijing last week and there are a number of censored sites. However, in Korea I have had problems with very basic sites like facebook, wall street journal, google, yahoo, Korean google, my hotel's webpage, etc. Further, I have successfully gotten all of these sites to load seemingly at random, and can access them without problems on other computers. The only disconnect seems to be between my MBP and the internet, not between Korean internet and the web. I have toyed around with the network settings, and although sometimes after switching from "Automatic" to a fixed connection I get some sites to work, it usually only lasts a short time and eventually the same sites stop working. I reset my cache regularly to make sure I'm not getting sent to cached sites, but this also doesn't help. Further, my Apple Mail, Skype and AIM accounts jump between being connected and disconnected randomly as well. Again, this is isolated to my own computer, which is why I'm so confused.

Strange connection problems -- software or hardware?

I've been experiencing some strange connectivity problems of late, and am wondering if it's a software or hardware issue. I'm running OS-X 10.4.11, and have noticed web-associated "drop-outs" occurring. When I'm browsing, any of the following will happen:
1. the pages will periodically stop loading, or will take forever to load a few final images.
2. the page will load with a different format (completely unformatted, like a throwback to Mosaic!).
3. the page won't load at all, and will instead give me either a "DNS error" message, or will default to my ISP's "We couldn't resolve your page" message.
4. Nothing out of the ordinary happens.
Throughout this process, the connection strength is 100%.
It seems this happens with both Firefox and Safari. Is this an issue with driver software, or is my Airport Card giving out? My computer is about 3 years old.

I have been having intermittent connection problems on several computers over many years now. We have 12 eMacs, all purchased within a few months of each other, all with 10.4.11. Some computers have almost perfect internet connection, but some are constantly losing connection. If the user just waits a few minutes, the network just comes back or if they open system preferences and renew the DHCP lease it comes back as well. We have tried replacing cables, reloading the operating system, repairing permissions, reseting safari... We are all connecting through ethernet cables through wall jacks then to a switch that is connected to our router. Our DSL provider claims it can't be wiring or a problem on their end or they would see it and we would all have problems. I am not super computer literate... Any suggestions for what I should check on the 4 or so computers that are having lots of connection problems?
Thanks for any words of wisdom!!!

Strange wifi problem on a brand-new MacBook Pro

Hey there, I'm new here. Desperation has got the better of me, and I hope I can get some advice.
So, last sunday I bought a brand new 13" MacBookPro with 2.8g i7 processor and 10.7.2 OS (I can't update to 10.7.4 because System Update tells me the download has been tampered with or corrupted after I waited 2 hours for it to finish, but I'm trying a direct download from the website). Here's the exact product: http://www.amazon.com/Apple-MacBook-MD314LL-13-3-Inch-VERSION/dp/B005CWIZ4O/ref= sr_1_5?ie=UTF8&qid=1340301247&sr=8-5&keywords=macbook+pro+13
Everything is all perfect except for a strange wifi problem. Note that the wifi does not turn-on or off, it doesn't disconnect after 'sleep', it doesn't get less speed, it doesn't constantly leave a preferred connection (once I chose my home wifi it always connects to it no problem). The wifi bar is always full. What is wrong is that the internet is kinda 'glitchy'. The best metaphor I can think of is that it's like a car that has to be pushed down the road before the engine can start. Please, bear with me because this is kinda hard to explain and I'm not good at tech lingos.
One of the symptoms is browsing can get really slow and inconsistent, almost as if the wifi gets turned off in the middle of browsing. For example: if I look something up on Google and then open 5 new tabs, probably only 2 or 3 of those tabs will eventually load while the other two will not get past the long 'http:.......google.....etc etc' address and will eventually show one of those 'error loading page because there's no Internet connection' notice. This happens a lot. Sometimes I have to refresh/retry loading a page a couple of times before it finally loads, then usually everything will get back to normal and I will be able to open multiple tabs with no problem, but in a couple of minutes I would try to open another site and the problem will start again.
So I tried to see how it does with downloading using iGetter. Fortunately I also have a Macbook (white-plastic casing one) and my brother has an old 2006 MacbookPro so I can compare. With those two older Apples iGetter starts receiving data in less than 8 seconds after I click Start, while my brand-new Macbook Pro can take up to 15-20 seconds, sometimes it doesn't even start at all and I have to re-click the start button. But once the download actually starts (on my new MacBook Pro), it downloads like normal, it doesn't stop and the speed is also as good as I can get. Strange huh? Hence, like a car that has to be pushed before the engine starts.
I also tried 'speed testing' from a website with all 3 laptops. On my old MacBook and my brother's MacBook pro, once I click 'begin test' it takes only a couple of seconds of 'ping' before the download/upload speed measurements start, but with my new MacBook Pro (just like with iGetter) it takes up to almost a minute before the measurements start, sometimes it won't start at all and I have to re-start the test.
Well, thanks for reading. And hope you can help me shed some light into this. Because it is really preventing me from really enjoying my new MacBook Pro. And if this is most likely a hardware problem, I'd better get back to the store and try to get it replace or something while it's only been 5 days. *cheers*

Hey guys.. Thanks for the replies. Unfortunately, I bought the MacBook in Indonesia where there are no such thing as an AppleCare. The only option is to leave the Apple product to one of the 'Authorized Apple care centre' and have whoever do whatever to it without guarantee of success. As for returning it and getting a brand new one, I also don't know if there is such a deal here, but that's actually a good idea, will try to go to the store tomorrow. Although, I'm worried that the problem might be with OSX Lion or something and getting a new one won't help.
mark75090, I've tried resetting the router when I first noticed te problem, didn't work though. I've checked my new MacBook's wi-fi (option+click wifi bar) and it says 'PHY Mode: 802.11g', so does my MacBook and the old MacBook Pro. I don't know what those mean though, and I don't know whether or not my router is an N., can you tell me more please.. I have tried with the other two turned off, and only the new MacBook using the wi-fi but the problem persists. I have also tried connecting directly to the router, but as I described, the problem is too subtle for me to notice the difference.
Also, if I create a brand new Wi-Fi connection in network preferences and connect to my router through the new Wi-Fi profile, the problem seems to be gone for an hour or so, then it always comes back though. I have also just finally installed 10.7.4, but it doesn't help either.

Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored

Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored and updated firmware, deleted the account, anything I could think of, but it's just not accurately downloading the most recent emails.

The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.

Msi 8800gt zalman temp problem

Hello
i got my new card yesterday but had a serious temp problem,
My setup is as follows:
msi kn9 diamond (mobo)
ozc pc6400 2gig (mem)
msi 8800gt zalman (GFX)
5600+ amd (CPU)
GFX mem temp: 65c
GFX GPU temp: 73c
I took it down my brothers so i could try it in his, just in case i had an issue with my comp,
Had the same results as me but like me he said the fins on the cooler wernt hot enough to be that temp,
We took the zalman cooler of and you know the plastic protective film used to protect the heatsinkl surface,
IT WAS STILL ON, Yes the plastic film was still in place, with thermal paste all over it,
so obviously removed it, put more paste on and now its idle at 38c and load is 50c
What more can i say!!!!!

YOU MAY HAVE CLOGGED THE ZALMAN 8800GT, HOW IS THE WATER FLOW? MINES GOT CLOGED, I OPENED MY ZALMAN 8800GTS AND THERE, PIECES OF SMALL LIKE GELLY TRAPPED INSIDE, YEP. YOU HAVE TO OPEN THE ZALMAN AND CHECK IT OUT...OR GET A NICE PRESSUE AND BLOW IT ALL OFF. MINES NOW IDLE 45 AND PEAK TO 55 ON CRYSIS.

Strange shutdown problem

Hi,
Last night, I had a strange shutdown problem on my iMac G5 (revB, 20", 2.0 Gig), with 1 Gig RAM, running 10.4.4 with all updates. I had had the computer on most of the day, using it off and on. I shut it down, and left the room. When I came back about an hour later, the fans were running (not rapidly, just at the normal speed they run when the computer is running), but the screen was blank, and the "sleep" light was not on. The computer wouldn't respond to any moving the mouse or to keyboard input. I finally shut it down by holding the power button until the fans shut down. Upon restart, everything was normal, and after using it for a few minutes, I was able to shut it down normally. Has anyone else seen this sort of behavior, and is it normal ? Or am I about to have more problems.
Thanks in advance,
Dave Fritzinger
Honolulu, HI

Hi Dave,
By the sound of it your computer has "hung" during the shutdown process, but at a point in the process where the system's temperature control mechanisms were still operating (otherwise the fans would be running flat out). My guess in this case is that it was probably actually a finder crash.
Various things can prevent proper shutdown. Often USB or FW devices are to blame. USB adsl modems , some scanners and hubs and the occasional printer driver seem to be common causes. Software can be responsible too, though - background virus or drive checkers are probably the most common, but far from the only possible causes ( I seem to remember "SpringCleaning" causing this problem when people moved to Tiger 10.4.2 for example) .
New software or hardware are therefore the first things to look for.
If you haven't installed anything completely new then one possibility may be that something you are using is not compatible with the latest OS update, and needs an upgrade to a driver. Its also possible that this is a "one off" glitch caused by a temporary problem , but if it happens again I'd be taking careful note of anything that you were using in the previous session.
You might also want to use the Console (in Utilities folder) to look at your system and crash logs.
Cheers
Rod

Suddenly have temp problems after 18 months w/out issues

Ok had my 651 for 18 months now and not single problem with temperature.
I moved house about 4 weeks ago and packed up my computer and drove for two hours to put it up in temporary accommodation (my folks). Came back two weeks later and made the return journey. No-one touched it over those two weeks.
Anyway, I set it up in my new place and things were going well, although I did notice that the fan was running a bit louder than usual when playing a movie (but figured that perhaps I hadn't noticed it in my old place).
So last night I had the computer on for about half an hour and it switched off. I went into the bios to check the temperature and lo and behold:
System temperature 40C
CPU temperature 80C
The threshold is 85C so I can only assume that the computer turned off as a result of the high temp.
The question is, why? Why, after all this time would I now get temp problems? Could moving the computer have dislodged something important? There is plenty of space around the box and the room is no hotter than the last one.
The only thing I have done lately is to fit a wireless PCI card, which is tiny, and isn't even fully installed yet! (not hooked up to broadband so haven't bothered installing the drivers). I don't think this is related, as I noticed the mega fan going mad even before I put this in.
Sorry for the long post, I hope you can help.

Well, did one last test last night - turned on the computer from cold and went straight into the BIOS - CPU temp started at 55C and within 40 seconds was up to 75C. So there was obvious something drastically wrong.
I opened up the box and sure enough, the heatsink was loose. All the moving must have dislodged the clip. The actual system to hold the heatsink on top doesn't really seem that secure to me - there is not really that much pressure on top of the cpu.
Anyway, I re-aliigned it and afterwards everthing was fine.
I might buy some of that Arctic Silver thermal paste, as the layer on top of the CPU doesn't really look sufficient.
Thanks for your help guys.

Strange major problem with 975X PowerUp Intel MOBO

I’m suddenly having a strange major problem with a MSI 975X Platinum PowerUP Edition V2.1 MS-7246 Intel socket 775 motherboard. Previously, it had given me no problems at all.
It went like this:
Powered on system in the morning, booting from a cold start.
Hit DEL key to get into the BIOS.
Missed the window and the system booted into Windows normally.
Re-started the system from within Windows.
Hit DEL key to get into the BIOS and was successful the second time.
Hit the ENTER key on the first item “Standard CMOS Features”.
The DATE, TIME and other information was displayed on the next screen, but at this point, the BIOS screen became completely unresponsive to any keyboard input.
The only thing I could do at that point was to power off.
Subsequent power on boot-ups resulted in the system always freezing at the BIOS splash screen after the video card sign-on.
I have switched power supplies, hard drives, keyboards and video cards. I have disconnected everything except the video card, keyboard and one RAM module. I have switched the four RAM modules around and then reduced the RAM to one 256MB module in the proper slot. I even changed the battery on the MOBO, in case it had shorted out and removed and re-seated the BIOS chip. It still halts at the BIOS splash screen.
The BIOS chip can’t be completely dead, because I powered off and pushed the BIOS reset button on the MOBO to reset the BIOS to the factory defaults. When I re-booted, I could tell that it had actually reset to the factory defaults because I had previously set the BIOS to reboot the system on resumption of power and the factory default was to remain off until the power button was pushed, which was now the default.
I’m stumped! All I can think of is to get a new pre-programmed BIOS chip and see if that makes any difference, but I’m not sure this system is even worth the expense with no guarantee of success. Any suggestions on how I might get past the BIOS splash screen or do I for sure have a corrupt BIOS chip?

System specs as per the posting guidelines -
Board: MSI 975X Platinum PowerUP Edition V2.1 MS-7246 Intel socket 775
Bios: Version (can’t recall & can’t check since it won’t go past the BIOS splash screen)
VGA: ASUS EN7600GS nVidia GeForce 7600GS PCI-e 256MB DDR2 (also tried new XFX nVidia
Geforce 210 PCI-e 2.0 512MB DDR3)
PSU: Chiefmax 680W ATX (also tried new OCZ 700W ATX)
CPU: Intel 2.8GHz LGA-775 Core2 Duo Dual-Core Processor
MEM: 4 x Samsung 512MB 1Rx8 PC2-5300U (2GB total)
HDD: Seagate Barracuda 250GB SATA2 (also tried Seagate Barracuda 500GB SATA2)
COOLER: Intel OEM LGA 775 fan/heatsink C25897-001
OC: No
OS: Vista Home Premium 32-bit
I have been through the BIOS reset procedure several times and pretty much as outlined. As I said before, I could tell that it had taken a reset to the factory defaults, because the power on option had changed.

Affecter un temps à une image prise par webcame

Bonjour
J'ai créé un programme permettant d'acquérir des images à partir de ma webcam.
Maintenant, je souhaiterai affecter à temps aux images, peut-être sous forme d'un tableau à deux colonnes ( ou 2 tableaux distinct ), il faudrait que dans un tableau apparaisse le nom de l'image concernée, et dans l'autre le temps à laquelle la photo a été prise ( ex : image01 & 09/10/2012/15h58 ).
Pour l'instant j'arrive juste à afficher la date dans une simple fenêtre en face avant.
Je pense que la solution est de faire une boucle mais je ne sais pas comment m'y prendre.
Je précise, étant débutante, je n'ai que peu de notions sur Labiew.
Merci d'avance pour vos réponses
Cordialement

Je vous joins le programme réalisé sur Labview.
Il permet d'enregistrer plusieurs images et d'enregistrer un temps mais pas sous forme de tableau or c'est ce que je veux faire.
De plus, j'aimerai indiqué à quel date ( jj/mm/aaaa/heure ) précise sont enregistrées les images or là il n'y a pas de lien entre le temps actuel et la sauvegarder des images.
Je ne vois pas comment faire.
Pouvez-vous m'éclairer sur le sujet ?
Cordialement
Attachments:
labview afficher avec webcam plusieurs images avec temps actuel.vi ‏116 KB

Wrt54g strange signal problem

I have a new wrt54g and I have a strange signal problem. When I am in the house close to the router I only have a good signal (3 bars) but when I take the notebook outside or all the way in the back bedroom I have a excellent signal (5 bars). I am thinking that something in the house might be interfereing with the signal but I have tried changing the channel and still have only 3 bars when in the house, and 6 bars when I take the notebook outside or to the back bedroom. I am using wap but I tried disabling it and still only 3 bars when around the router.
Any thoughts, and thanks in advance.

I tried it all but still the same but I did find this, when I take then computer in the back of the house or outside the signal goes up to excellent and stays there even if i take it back in the front of the house where I previously only had a good signal. But the only way to get a excellent signal is to take it far off from the router but once it does get a excellent signal it will stay there even when I take back around the router, crazy I know.
Any more advise or thoughts?

Does the Neo4-F suffer the same temp problems as the Neo2 Platinums?

Hey there,
I'm about to change my Neo2's below and in the process put these five Opteron 146's in "something'.
(The Asus board is a test bed. I really liked my old A7N8X Dx's and bought it cheap enough used)
Can someone here answer if the Neo4-F's suffer the temp reading problems as my Neo2 Platinums do?
Nothing like rebooting to "get' a lower temp. Or watch it rise 1-2deg a day in a stable ambient.
I'd really like to not end up with new BIOS's being released attempting to cure the "supposed" temps reported.
They run 24/7 for Grid.org's Cancer Research and misleading or incorrectly reported temps worry me at times.
Thanks,
Rick

Hi......
Can´t speak for the Neo4-F MoBo, just some general comments, that may or may not help you.
What temp problems did you have with your Neo2 MoBo ?
Getting a 100% accurate cpu temp reading seems to be difficult task to achieve for many Vendors and softwaremakers.
Differant vendors may have differant ways to monitor the integreated cpu temp sensor, which does not necessarily mean that the actual cpu temp is differant between differant MoBo´s.
Meaning a low cpu temp report may not be true and vice versa, so knowing the true cpu temp is not that easy, but I believe that any system that runs stable 24/7 is happy, no matter what cpu temp that is reported ( within reasonable values)
There are usually some "safe cpu temp" biossettings that could be changed, if the reported cpu temp is too high, to avoid shut downs / boot problems.
Some basic factors to consider are ;
- ambient room temperature
- what cpu cooler / thermal grease is used
- case / system ventilation and airflow
- what biosversion used
- surrounding system componenets, like VGA, PSU etc.
- stock or OC cpu-speed and cpu voltage
The above factors are the things you can affect yourself, no matter what MoBo.
For the moment I´m running a K8N Neo2 / Winchester with some 28c idle and 45c load.
I´m getting an opteron 146 to the weekend and it will be interesting to see what cpu temp I will get.
It is my understanding that the opterons runs a bit hotter compared to winchester / Venice cores.

The Definative Newcastle Temp Problem Thread

Right then,if you have a NEWCASTLE core and a temp problem then post here.
Rules for this thread:
a)Please only Post in this thread if you have a temp prob!,NO POSTS OF MINES FINE,OR YOUR CPU IS BORKED.
b)Please post the cpu stepping which can be found out with this program which is free HERE and what motherboard and bios revision either offical or beta.
c)Please post two temps,one without cool and quiet enabled in bios (disable it in bios under Frequency/Voltage Control) and again with it enabled and with your windows power schemes set to Minimal Power (make sure you have the AMD driver for cool&quiet to work properly).
d)Please post another set of temps when after stressing your system both with cool&quiet enabled and disabled.
e)Your max temp that you ever had say after running a game or prime95 ect,ect
with COOL&QUIET still enabled.
f)What heatsink and fan your using.
NOTE:
Please note the AMD driver isn't on the motherboard cd and you are required to goto AMd website and download the driver for your particular operating system here
so i will start this and hopefully others will follow,use format below:
MOTHERBOARD = K8T NEO
BIOS = 1.74 beta
CPU = NEWCASTLE 3200 A64 512 OF LEVEL2 CACHE
STEPPING = F,C,O
IDLE TEMPS WITH COOL&QUIET DISABLE IN BIOS = 68C TO 72C
IDLE TEMPS WITH COOL&QUIET ENABLED IN BIOS = 50C TO 54C
MAX TEMPS WITH COOL&QUIET DISABLED IN BIOS = 77C
MAX TEMPS WITH COOL&QUIET ENABLED IN BIOS = 77C
HEATSINK & FAN = RETAIL

Here is my response from MSI:
Quote
Thank you for contacting MSI Technical Support.
The CPU temperature you mention is acceptable. The CPU temperature is different according to the CPU model and type and even produce data and manufactory. The temperature is acceptable if only the temperature is in the range of the CPU temperature. Please check the OPN code marked on the top of your CPU then figure out the highest temperature which your CPU can accept, refer to this link: http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=amdcpu . And please make sure again the CPU fan is installed properly and closely and assure the airiness for your case is fine.
Thanks for your supporting MSI product. We're sorry for any inconvenience caused. Please feel free to let us know if you still have any further issues or inquires.
Best regards,
MSI Technical Support
Now I can see how they might have been able to say that my temperatures are "acceptable" in the sense that they are not at or above the critical temperature of the CPU (70C), even though I think high temperatures are just as unacceptable, but there is no rational reason of which I can think that they would be able to say the same thing in response to the data mcmanic sent in, which contained a few measurements of CPU temp above 70C. According to AMD, that should simply be impossible because the CPU will halt itself at 70C for its own protection.

Post Moved Strange-wifi-problem-laptops-work-fine...

MOVED http://community.bt.com/t5/Other-BB-Queries/Strange-wifi-problem-laptops-work-fine-phones-dont/td-p/...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Have never heard of that problem before so can only give you an idea of some things to check.
Check in the Homehub management that it is not set to block access to the mobile devices. If you did a factory reset of the hub then it should have cleared any settings but it might be worth checking.
Have you checked that they are connecting to your Homehub and not to BTWifi which would require further log on to get internet access.
What exactly is happening with the devices when you try to connect to the internet. Is it all things to do with the internet or can you connect by 3g?
Have you tried to connect using another router such as at a friends house?

Strange math-problem with LabVIEW 7.1

Hello!
I am using LabVIEW 7.1 and I came to this strange math-problem. Could it be that it is a problem of LabVIEW 7.1?
Ok try this with LabVIEW 7.1:
open a new VI
place a subtract-VI (pallet numerical) on the block diagram and try to subtract 0.2 from 1.6
place a less-VI (pallet compare) on the block diagram and wire a numerical constant 1.4 to input x
wire the result of the subtraction to input y of the comparison
place an LED to the output of the comparison
and start this.
What does it say?
The LED should turn on and this means here that 1.4 would be less than 1.4 .
But I would have expected that 1.4 is not less than 1.4 .
This works also if you add or subtract upto 0.2 to/from the values 1.4 and 1.6 (or equivalent with 0.2) .
If you change the inputs of the comparison then the result is as expected and 1.4 is reported not to be less than 1.4 .
If you compare two constants with the same value 1.4 you will not get the same strange result.
Does anybody have an explanation for this?
Espelkamper

Hello,
For floating point math: Rounding to multiples of 0.1 is problematic as
those numbers are infinite fractions in base2 representation...
So maybe you should change your numbers to integers using fixed point math. If all your input values are in the range of 1.4 to 1.8 you can multiply by 10000 and round to next integer. Then do your comparison on that integer (there's also an 'InRange' function in the comparison palette).
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Strange temp problems [Images]

Similar Messages

Maybe you are looking for