Strange text at top of tab

HI,
There is strange text at the top of my tab which is very annoying I am not sure why this is occurring.
If you take a look at the pic I have uploaded you will see my issue with your web browser.
If you have any suggestions in resolving this issue please let me know?
Thanks Daniel

Hello Daniel, '''the problem is mcafee site advisor extension''', please try to disable or remove that extension and you are OK.
see : [http://service.mcafee.com/faqdocument.aspx?id=TS100162 How to uninstall SiteAdvisor]
before that, check another option, '''if works for you, without to uninstall the mcafee site advisor extension''' :
disabled the add-on then close firefox and restart Firefox again. Then enable the add-on again, close firefox one more time and restart Firefox again. (works [https://support.mozilla.org/en-US/questions/1039845#answer-673562 here] :-))
thank you

Similar Messages

  • Strange text in iTunes devices tabs "%1$S"

    I recently tried to restore an iPad mini's 7.0 backup to a replacement iPad mini. I was eventually successful but I was thwarted by what appears to be misplaced strings in the devices tab of iTunes.
    Using version 11.1.1 on OSX 10.8.5 status post supplemental update.
    See screenshot below of the problem. Identical issue happens with my iPhone 4S on 7.0.2 when it connects. Anyone else have this?

    I downloaded the update file manually from Apple.com and reinstalled. Fixed it! Looks like the update from the App Store was corrupted somewhere along the line.

  • Strange text when replying

    Hi,
    I have a 3G S Iphone I just got last week. While using it this week it came to my attention that sometimes when I replied to an email that had a lot of activity (reply after reply, etc) strange text would appear on top of what I wrote. An example is the following,
    References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <00f401ca19 e4$c0706630$41513290$ @ com.mx> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>Content-Type: multipart/alternative;boundary=Apple-Mail-3--1026370481Content-Transfer-Encodin g: 7bitMime-Version: 1.0 (iPhone Mail 7A341)Date: Tue, 11 Aug 2009 12:20:49 -0500Cc:
    [List of emails I replyed to]
    OriginalArrivalTime: 11 Aug 2009 17:21:12.0114 (UTC) FILETIME=[1FA3D920:01CA1AA8] --Apple-Mail-3--1026370481Content-Type: text/plain;charset=utf-8;format=flowed;delsp=yesContent-Transfer-Encoding: quoted-printable
    Then the text would appear.
    Anyone have an idea of what is going on?
    I haven't seen it happen when I reply to someone directly.
    Thanks

    So an update..
    I took out the battery and reseated it. Simply blew on the connectors, not sure if it did anything. I plugged the battery back in and connected it to my PC and viola. Apple logo appears on the screen.
    The phone boots up and displays the no sim error (I had removed the sim card) and starts to sync to iTunes. It gets mostly synced then this happened:
    So... It sat like that for about two minutes before shutting itself off again. It is once again being completely unresponsive. I tried reseating the battery again but it hasn't helped.
    Please, if anybody has any suggestions, let me know. Thank you!
    -edit-
    I've managed to get the phone into recovery mode and doing a full restore right now as a new device. I'm beginning to think the lock button has something to do with this entire issue. It may be that it's stuck down somehow without the actual hardware part being stuck?

  • How can I change the default text on my homepage tab?

    When my homepage displays it has some kind of weird garbled text in the page tab at the top. Is it just a placeholder? How do I change it?

    It's not "some kind of weird garbled text". It's called Latin, an ancient language. Learned people still speak it. And it's taught in institutes of higher learning.
    It's also used as placeholder text in printing :
    http://www.lipsum.com/
    See the image below where the text originates.
    But you have some issues on your page that can be solved by simply paying attention to what you do.
    First there's an image covering the links. Old Toad referred to that. Move it down, or change the dimensions :
    And that "some kind of weird garbled text" is hidden behind your brochure :
    Read this to learn how iWeb creates the title in the titlebar :
    iWeb uses the textbox in the Header layer of an iWeb page as the title in the browserwindow.
    Do not remove the original textbox, as you cannot replace it other than by selecting another theme and then change it back to the original theme again. Ruining the layout in the process.
    If the textbox in the Header is missing, iWeb uses a textbox down the page in the Content layer. If that textbox is also missing, it uses another textbox. If that fails it uses the pagename in the Sidebar.
    Sometimes you may want a different text in the titlebar and not display it on the page itself. Or not display it at all.
    So use that textbox in the Header layer. Type your text. Then select the textbox. In the Inspector choose T, click a color to open the color palette and drag the opacity slider to 0 (zero).
    Do Command-T to open the font palette and make the font smaller. (Or do Command--(minus)) Also use a font that doesn't change to an image. Arial is a good font. Perhaps do it first before making the text invisble.
    Resize the textbox. You may want to change the height of the Header layer.
    Do Command-Shift-B to move the textbox to the back, possibly behind other objects.
    Next add a optional second textbox to the Header layer and use that one to display text on the page.
    If you want to move the textbox to the front again to make changes, but can't remember the location on the page, drag the area with the mouse to select the objects.
    Deselect objects you do not want to move forward by Command-dragging the mouse over these objects.
    Next do Command-Shift-F to move the textbox to the front. Repeat the steps in reverse order to make the text visible.
    Practice.

  • How to I add text on top of image? I am using pages version 5.2.2

    I am working on an apple desk top OSX version 10.9.4. Since the new pages version 5.2.2 came out, I have been unable to add text on top of an image. Can anyone help me? Thanks ahead of time.

    Pages v5 is not as flexible as Pages ’09 v4.3. If you want text over a free-standing image in your document, then you will need to place it in a Text Box, Shape, or other custom container created with the Unite, Intersect, Subtract, or Exclude items in the Arrange panel. Simply selecting the image and then, in the Arrange tab, stating move with text; setting wrap to none, and clicking back/ward — does not help.
    You will need one of the containers from the second sentence positioned on top of your image. Once your text is input and styled, select the Text Box and the image, then from the Arrange tab, select group to maintain your text/image spatial relationship. If you need the image and its text container to adapt to other text in your document, you can enable the wrap functionality that best suits your document goals.
    This can get interesting, because you can independently define the selected Text Box content as a text placeholder, and the image as a media placeholder. Save it as a template. When you open a new document with this template, you can drag and drop a new image onto the old one, and it is automatically scaled and replaced without effecting the Text Box content. You can then double-click the Text Box content and change it.

  • Very strange text on screen - Server 10.2.8

    One place I work has a Mac network based around a G4 1.25 Ghz server running 10.2.8 Server and some Mk II iMacs running normal 10.2.8. Yesterday when I came in the server was showing a black screen with the following text scrolling down the screen in great lines:
    diskOs9; Ox5 (UNDEFINED) <- written down in haste, I think I got the O as a letter not a number 0
    ... touching mouse or keyboard added further strange text and then it would return to the above.
    Totday it all seems happy. But somehow I doubt if this is healthy. Any advice greatly appreciated. I'm trying to persuade the outgoing CEO not to set in train the acquisition of PCs, if only because I genuinely think it would end up costing more in the long run, and the place is hard up already!
    I'm also wondering if the batteries on these machines are getting old - the network dates from 2003. Some of the last saved dates on the server are definitely totally wrong. Moreover there are strange things happening too; last week my files were dated things like 1911, 1942 etc etc, this week they are perfectly OK.
    Getting worried!

    [I got a black screen telling me I had to reboot in many languages, what was it?|http://www.dslreports.com/faq/4970] Also has detailed description of what happens during a KP.
    [Apple docs: What's a kernel panic? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=106227]
    [Topic : kmosx: Kernel Panics? Don't panic too !|http://discussions.apple.com/thread.jspa?threadID=121923]
    [X-Lab: Resolving Kernel Panics|http://www.thexlab.com/faqs/kernelpanics.html]
    [Tutorial: Avoiding and eliminating Kernel panics|http://www.macfixit.com/article.php?story=20060911080447777]
    [Tutorial: An introduction to reading Mac OS X crash reports|http://www.macfixit.com/article.php?story=20060309075929717]
    [12-Step Program to Isolate Freezes and/or Kernel Panics|http://macosg.com/group/viewtopic.php?t=800]
    [Texas Mac Man's post on kernel panics|http://discussions.apple.com/thread.jspa?threadID=1723768&tstart=0]

  • The area at the top of Tab bar where i would type in the webpage is gone, how do i get it back

    the area at the top of Tab bar where i would type in the webpage is gone, how do i get it back?

    MacBook Pro, Mac OS X (10.7.4)  < your profile
    If that is correct, updating your system software may help the Safari toolbar issue.
    Click Software Update from your Apple menu OR open System Preferences > Software Update > Check Now
    Restart your Mac after the updates are installed then try Safari.
    If your software is actually up to date, from the Safari menu bar click Safari > Preferences then select the Extensions tab.
    If you have any extensions installed, turn that OFF, quit and relaunch Safari to test.
    If the address bar reappears, uninstall one extension at a time, quit and reluanch Safari to test until you find the one that's blocking the address bar.

  • Every time I click on the Categories tab or Top 25 tab in the app store, it says 'too many http redirects'

    Every time I open the app store on my iPod touch, it says 'too many http redirects' whenever I click on the Categories and Top 25 tabs. I tried force quitting the app store, that didn't work. I tried closing all windows in Safari and force quitting safari, also didn't work. I reset the network settings, that didn't work either. When I reset all settings, it appeared to work. The tabs were different (it had a Genius tab), but it worked. However, immediately after force quitting the app store (I force quit a lot to keep as much RAM clear as possible), the same thing happened again. Does anyone know a permanent, Apple-supported solution to this problem? And please do not say restoring it. I don't want to start from scratch just to potentially experience the same problem.

    See:
    to many HTTP redirects: Apple Support Communities
    However, it seems to be an Apple/network problem beyond your control

  • Adobe LiveCycle Form- End result is text on top of text, WHY?

    After completing my form which I was creating, (after steps I want saved, I save it then preview to make sure everything looks fine and no problems till the very end). I hit preview and there are lines of text on top of one another in many areas of my form. It was not like this at all until the very end. I checked the scripting and it seems to be not the problem. I even sent it to another person's computer and it does the same thing.
    It is not showing this way in the Design Mode.
    I also checked to see if it were the "preview" size but that didn't appear the issue. What I do not understand is that when I print the form out, it is perfect. Can someone help me understand what is going on and solutions to solve this issue please? I am new to forms, Adobe Acrobat and LiveCycle so please provide an answer that I can understand easy.
    Here is a sample of what part of my form looks like.

    Hi,
    I'm thinking of possible reason for your problem.
    Check these solutions, maybe they can help you.
    http://blogs.adobe.com/dmcmahon/2011/02/01/livecycle-designer-flowed-layout-in-headerfoote r-subforms-incorrect/
    http://blogs.adobe.com/dmcmahon/2011/10/10/lc-forms-es-text-overlapping-on-page-break-usin g-nested-subforms/

  • Text on top of Pics or Pics behind Text

    Does anyone know how I can have my picture behind my Text in Pages 09. I know the generic way is to print the picture and reinsert the paper back into the printer and let the text print on top of it. This would suck. I have a picture that I have Faded which covers the whole page. I want to Type on top of this picture. This will have a nice affect. While reading the info on the page you can slightly see on the invitation what the event is about. Please help me figure out how to get the cursor on top of the pic so as to add text on top of it.
    Thanks

    Select the image by command clicking on it:
    +Menu > Arrange > Send to Back+
    Create a textbox from the Toolbar at the top of your document window, with the text in it and position it over the image.
    You can fade the text if you wish using:
    +Inspector > Graphic > Opacity+
    Download the Pages09_UserGuide.pdf from under the Help menu and familiarise yourself with how Pages works. This is not dissimilar from almost any other program
    Peter

  • How to change the font size of Text Box  Properties Appearance tab into 2 decimal digit.

    How to change the font size of Text Box  Properties Appearance tab into 2 decimal digit. I am uanble to modify it to 5.38 pt for example. Its only allowing to 1 decimal place.

    Click on each field and the choose Properties from either File menu (or if on Mac hold dow mouse button until context menu appears choose properties)
    go to Font
    choose desired size and type font,you can choose to make this the default.
    Do this with each field.
    Or if you have a lot of fields:
    while one is selected select all of them
    then go to fonts in properties
    change Font and size and make default.

  • Strange text display in pdf using adobe reader exported by Indesign CS5

    Hi there,
    I have export an interactive pdf from indesign CS5 PC version with version 7 update, and it looks fine in most of the PC and Mac Adobe reader.
    But 2 of the computer had strange text display. One is the iMAC with latest version of Adobe Reader
    <== you can see the text "78" and "454" are abnormal
    But with the same computer using Safari with perview plugin is showing following result:
    <==you can see the text are normal.
    The pdf is embedded with following fonts and property:
    Another Windows XP with Adobe Acrobat 9 will had same display as the iMac.
    I ensure the Windows XP don't have the font installed with HelveticaNeue and the Mac is using OS Lion Bundle with that font.
    Now the customer blame it is the problem of the pdf created by me and I had no idea how to explain to my customer and find out solution.
    I had a trial version of CC but same result and no error during the export.
    Any idea is highly appreciate. The customer hotline and the live chat is hopeless as they send me to this community to ask since I use CS5 not the latest version.
    Regards,
    Ichi

    Thanks Willi,
    I had the fonts of Helvetica Neue bold light etc which created by Adobe and the font was created in 1993,shown in font property.
    my PDF output is set to interactive not the print one. Other settings are default.
    the purpose of this PDF is for user to print out and read on website. The funny thing is print out had no problem at all with HP and Ricoh printer using PCL 6 driver.
    Despite Safari, the strange font happened in only Adobe product, other PDF reader had no problem such as foxit reader, xchange reader.
    I tried to not embed the font but not able to do indesign, search in Google, it said it always embedded. Also that font family is preloaded in Mac OS.
    I can try any test if there is a way to find out the solution.
    or what should I do so the PDF should display correctly in all computer
    thanks a lot.

  • Hover Text in Top Level Navigation

    Hi,
       I need to add a Hover Text for Top Level Navigation.I need to display some information text regarding the Role on moving mouse over it.
    I did experimenting on download of com.sap.portal.navigation.toplevelnavigation but I am unaware where exactly Change to be made.
             Any ideas??
    Regards,
    Raja Akella.

    HI Raja,
    Check the Accessibility flag in  the New User Registration form, if it is ON then it disables Hover feature for the portal.
    Check the link esp the Header area part :
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/dc4f3eeb684212e10000000a11405a/frameset.htm">Understanding the Portal Desktop</a>
    To know about Accessibility :
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/8d/b7bf3feb915f7be10000000a11405a/frameset.htm">Accessibility</a>
    Hope it helps you.
    Regards,
    Vivekanandan

  • Filtering top level tabs based on user attributes

    Hello everyone ~
    I've been creating role and workset filters based on the Webinar demonstration given by Marion Schlotte (<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/17968de1-0a01-0010-1f9f-c090fbc7001a">Filtering Role and Workset Content for Developers</a>) and things have been going well.  I've been assigning the filter to a role (an entry-point role) and then filtering what worksets the user sees at the second level navigation.
    Now what I'm trying to do is filter what top-level tabs the user sees using this filter.  So I assigned the worksets in the role as entry points, instead of the role itself being an entry point.  However, the filter doesn't work now.  I don't see any of the worksets in the top level navigation at all.  I also don't see any errors in the logs.  All of the messages I have logged during the filtering process are logging as normal, and I don't see any errors being thrown.  But still the top-level tabs for my worksets don't appear.
    Has anyone been testing with this functionality?  Why would setting the worksets as entry points cause the filter to no longer work?  Has anyone tried this, or have any ideas?
    Thanks for your help,
    Fallon

    Hi Will,
    I'm thinking on using this filtering approach to solve another problem... But for that, I need this filtering to work based on URL entered, not on the logged in user.
    I was thinking about implementing the method
    getObjectInstance(obj, name, nameCtx, environment)
    from
    FilterDemoCountryFactory
    to perform the filter based on URL (from context or environment). Do you know if this information (URL) is available in Context ou in Environment (hashtable)??
    Thanks in advance.
    Best regards,
    Raphael

  • Why can't i drag text/link to the tab bar and have it open a new tab?

    Whenever i drag highlighted text, drag a URL, or drag a link to an image/video to the tab bar nothing happens. Previously FF would open this as a new tab, but i can't seem to find out what is wrong.

    ''in Chrome you can drag a text to a new tab and Google(or your default search engine) gives you the search results of that text in that new tab''
    ''Sometimes it works, sometimes it randomly opens a nonexistent .com-less url or appends .com for no reason.''
    Nothing happens when I drag text and drop it on a tab or the new tab button. Do you need to wait for the tab to display and then drop it on the address bar?
    Two alternatives might be:
    (1) Right-click selected text, then choose Search Google for... to open a search in a new tab
    (2) Hold the Alt key while dragging and dropping the selected text onto the search box/search bar to open a search in a new tab

Maybe you are looking for