Strange Text Behaviour [HELP]
I have a movie clip that contains a multiline text field. It has about 20 lines of text. Each line numbered.
1. kjlkjasldkjlaskjlaskjd
2. klasjlaksjdlaksdj
3. kajshdkajhsdkjahsdkh
etc.
For some reason .. the entire first line of text disappears and then randomly comes back when you scroll it off screen.
So when you scroll it off screen and then bring it back in to view.. the text starts at 2. kjahskdjhasdkjha
if you keep scrolling up and down for a bit, line 1 just randomly comes back.
I have no idea whats causing this.
Any ideas ?
I'm beginning to think this is a bug - in the last fortnight I've had 3 people at the office ask me how to switch this off and they've all sworn blind that they didn't switch this feature on to begin with.
Is there a key combination they are accidentally hitting which is switching this feature on? =0)
Similar Messages
-
Hi there,
So strange text behaviour here: http://screencast.com/t/atGbhTznY. I think the video is self explanatory. In Photoshop CS5 it shows the text size properly,
Desired effect or defect ?
Regards,
SKPattie,
Not to answer for Simeon, but this is different behavior in PsCS6. Say you scale two text layers (for example- 10 pt scaled 200%) and commit the scale. When you target each layer individually, the pt size reflects the scale (so it will appear around 20 pt). However. if you target BOTH text layers the font size is indicated as 10 pt - the original size before the scale. One would expect if you target 2 text layers of same font and size, the Character Panel would show the correct size, as happens in PsCS5.
Steps to reproduce:
Open default RGB 8 bit document.
Select Type tool at default settings 12pt type. Type a word and commit type.
Type another word at same font and commit (you’ll now have two text layers, same font and size)
Target both text layers and Edit>Transform>Scale 200%. Commit the transform.
When each layer is targeted individually, the Type Tool Option bar (or Character Panel) shows the new, scaled size of 24pt
Shift click to target both the 24pt text layers… now Type Tool Option bar reverts to show 12 pt.
Expected behavior: that the Option Bar would show the new pt size of the two layers. -
Strange Reassociation behaviour - help on troubleshoot
Hi there,
I have a production wlc wich has several ssid's working.
In a particular ssid, the wifi clients are bar code readers, using a wpa psk encription/authentication.
My client had bought a new bar code readers, and since then, we are having problems.
I had capture a debug client <mac> and attached here.
I cant find a reason for so much reassociation requests... even for the same AP.
Please give a light in here please.
My Best Regards,
PetrónioThank You leolaohoo,
I'll try it asap.
Do you detect any strange behaviour on the log ???
I detect a strange shortcut on the flow ...
START -> AUTHCHECK -> 8021X_REQD -> L2AUTHCOMPLETE -> RUN
*apfMsConnTask_0: Sep 23 13:41:06.809: e0:2a:82:68:b3:da 10.120.109.101 RUN (20) Change state to START (0) last state RUN (20)
*apfMsConnTask_0: Sep 23 13:41:06.809: e0:2a:82:68:b3:da 10.120.109.101 AUTHCHECK (2) Change state to 8021X_REQD (3) last state RUN (20)
*apfMsConnTask_0: Sep 23 13:41:06.809: e0:2a:82:68:b3:da 10.120.109.101 8021X_REQD (3) Plumbed mobile LWAPP rule on AP ac:a0:16:ca:b8:30 vapId 1 apVapId 1
*Dot1x_NW_MsgTask_2: Sep 23 13:41:06.878: e0:2a:82:68:b3:da 10.120.109.101 8021X_REQD (3) Change state to L2AUTHCOMPLETE (4) last state RUN (20)
*Dot1x_NW_MsgTask_2: Sep 23 13:41:06.878: e0:2a:82:68:b3:da 10.120.109.101 L2AUTHCOMPLETE (4) Change state to RUN (20) last state RUN (20)
From "Policy Enforcement Module (PEM)" Figure, in "http://www.cisco.com/en/US/products/hw/wireless/ps430/products_tech_note09186a008091b08b.shtml" i see it bypass dhcp states.
But nevertheless, if we have "RUN" states, then we could afirm, that " Client has successfully completed the required L2 and L3 policies and can now transmit traffic to the network" . Im i right ?
Petrónio -
Hi everybody,
on my MacBookPro Mid2010 I get a strange graphics behaviour:
The screen sometimes looks like this:
http://www.apfeltalk.de/forum/attachments/78146d1324206564-macbook-pro-grafikfeh ler-screenshot.jpg
(This is not my own image, but my issue looks exactly the same!)
Has anyone ever seen this?
Does someone know, why it appears?
Or things I can do against it?You can see this problem on my video : http://youtu.be/fvKaRJZlVco. With this problem Apple change my motherboard for free. I hope this video will help you.
The problem happens when your macbook pro 15 core i7 mid-2010 passes the intel graphics card to nvidia 330M graphics card with iPhoto for example.
Apple text :
http://support.apple.com/kb/TS4088
Sorry for my bad english. -
Hi,
I have a 3G S Iphone I just got last week. While using it this week it came to my attention that sometimes when I replied to an email that had a lot of activity (reply after reply, etc) strange text would appear on top of what I wrote. An example is the following,
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <00f401ca19 e4$c0706630$41513290$ @ com.mx> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>Content-Type: multipart/alternative;boundary=Apple-Mail-3--1026370481Content-Transfer-Encodin g: 7bitMime-Version: 1.0 (iPhone Mail 7A341)Date: Tue, 11 Aug 2009 12:20:49 -0500Cc:
[List of emails I replyed to]
OriginalArrivalTime: 11 Aug 2009 17:21:12.0114 (UTC) FILETIME=[1FA3D920:01CA1AA8] --Apple-Mail-3--1026370481Content-Type: text/plain;charset=utf-8;format=flowed;delsp=yesContent-Transfer-Encoding: quoted-printable
Then the text would appear.
Anyone have an idea of what is going on?
I haven't seen it happen when I reply to someone directly.
ThanksSo an update..
I took out the battery and reseated it. Simply blew on the connectors, not sure if it did anything. I plugged the battery back in and connected it to my PC and viola. Apple logo appears on the screen.
The phone boots up and displays the no sim error (I had removed the sim card) and starts to sync to iTunes. It gets mostly synced then this happened:
So... It sat like that for about two minutes before shutting itself off again. It is once again being completely unresponsive. I tried reseating the battery again but it hasn't helped.
Please, if anybody has any suggestions, let me know. Thank you!
-edit-
I've managed to get the phone into recovery mode and doing a full restore right now as a new device. I'm beginning to think the lock button has something to do with this entire issue. It may be that it's stuck down somehow without the actual hardware part being stuck? -
Strange memory behaviour using the System.Collections.Hashtable in object reference
Dear all,
Recently I came across a strange memory behaviour when comparing the system.collections.hashtable versus de scripting.dictionary object and thought to analyse it a bit in depth. First I thought I incorrectly destroyed references to the class and
child classes but even when properly destroying them (and even implemented a "SafeObject" with deallocate method) I kept seeing strange memory behaviour.
Hope this will help others when facing strange memory usage BUT I dont have a solution to the problem (yet) suggestions are welcome.
Setting:
I have a parent class that stores data in child classes through the use of a dictionary object. I want to store many differenct items in memory and fetching or alteging them must be as efficient as possible using the dictionary ability of retrieving key
/ value pairs. When the child class (which I store in the dictionary as value) contains another dictionary object memory handeling is as expected where all used memory is release upon the objects leaving scope (or destroyed via code). When I use a system.collection.hashtable
no memory is released at all though apears to have some internal flag that marks it as useable for another system.collection.hashtable object.
I created a small test snippet of code to test this behaviour with (running excel from the Office Plus 2010 version) The snippet contains a module to instantiate the parent class and child classes that will contain the data. One sub will test the Hash functionality
and the other sub will test the dictionary functionality.
Module1
Option Explicit
Sub testHash()
Dim Parent As parent_class
Dim d_Count As Double
'Instantiate parent class
Set Parent = New parent_class
'Create a child using the hash collection object
Parent.AddChildHash "TEST_hash"
Dim d_CycleCount As Double
d_CycleCount = 50000
'Add dummy data records to the child container with x amount of data For d_Count = 0 To d_CycleCount
Parent.ChildContainer("TEST_hash").InsertDataToHash CStr(d_Count), "dummy data"
Next
'Killing the parent when it goes out of scope should kill the childs. (Try it out and watch for the termination debug messages)
'According to documentation and debug messages not really required!
Set Parent.ChildContainer("TEST_hash") = Nothing
'According to documentation not really as we are leaving scope but just to be consistent.. kill the parent!
Set Parent = Nothing
End Sub
Sub testDict()
Dim Parent As parent_class
Dim d_Count As Double
'Instantiate parent class
Set Parent = New parent_class
'Create a child using the dictionary object
Parent.AddChildDict "TEST_dict"
Dim d_CycleCount As Double
d_CycleCount = 50000
'Blow up the memory with x amount of records
Dim s_SheetCycleCount As String
s_SheetCycleCount = ThisWorkbook.Worksheets("ButtonSheet").Range("K2").Value
If IsNumeric(s_SheetCycleCount) Then d_CycleCount = CDbl(s_SheetCycleCount)
'Add dummy data records to the child container
For d_Count = 0 To d_CycleCount
Parent.ChildContainer("TEST_dict").InsertDataToDict CStr(d_Count), "dummy data"
Next
'Killing the parent when it goes out of scope should kill the childs. (Try it out and watch for the termination debug messages)
'According to documentation and debug messages not really required!
Set Parent.ChildContainer("TEST_dict") = Nothing
'According to documentation not really as we are leaving scope but just to be consistent.. kill the parent!
Set Parent = Nothing
End Sub
parent_class:
Option Explicit
Public ChildContainer As Object
Private Counter As Double
Private Sub Class_Initialize()
Debug.Print "Parent initialized"
Set ChildContainer = CreateObject("Scripting.dictionary")
End Sub
Public Sub AddChildHash(ByRef ChildKey As String)
If Not ChildContainer.Exists(ChildKey) Then
Dim TmpChild As child_class_hashtable
Set TmpChild = New child_class_hashtable
ChildContainer.Add ChildKey, TmpChild
Counter = Counter + 1
Set TmpChild = Nothing
End If
End Sub
Public Sub AddChildDict(ByRef ChildKey As String)
If Not ChildContainer.Exists(ChildKey) Then
Dim TmpChild As child_class_dict
Set TmpChild = New child_class_dict
ChildContainer.Add ChildKey, TmpChild
Counter = Counter + 1
Set TmpChild = Nothing
End If
End Sub
Private Sub Class_Terminate()
Debug.Print "Parent being killed, first kill all childs (if there are any left!) - muahaha"
Set ChildContainer = Nothing
Debug.Print "Parent killed"
End Sub
child_class_dict
Option Explicit
Public MemmoryLeakObject As Object
Private Sub Class_Initialize()
Debug.Print "Child using Scripting.Dictionary initialized"
Set MemmoryLeakObject = CreateObject("Scripting.Dictionary")
End Sub
Public Sub InsertDataToDict(ByRef KeyValue As String, ByRef DataValue As String)
If Not MemmoryLeakObject.Exists(KeyValue) Then MemmoryLeakObject.Add KeyValue, DataValue
End Sub
Private Sub Class_Terminate()
Debug.Print "Child using Scripting.Dictionary terminated"
Set MemmoryLeakObject = Nothing
End Sub
child_class_hash:
Option Explicit
Public MemmoryLeakObject As Object
Private Sub Class_Initialize()
Debug.Print "Child using System.Collections.Hashtable initialized"
Set MemmoryLeakObject = CreateObject("System.Collections.Hashtable")
End Sub
Public Sub InsertDataToHash(ByRef KeyValue As String, ByRef DataValue As String)
If Not MemmoryLeakObject.ContainsKey(KeyValue) Then MemmoryLeakObject.Add KeyValue, DataValue
End Sub
Private Sub Class_Terminate()
Debug.Print "Child using System.Collections.Hashtable terminated"
Set MemmoryLeakObject = Nothing
End Sub
Statistics:
TEST: (Chronologically ordered)
1.1 Excel starting memory: 25.324 kb approximately
Max memory usage after hash (500.000 records) 84.352 kb approximately
Memory released: 0 %
1.2 max memory usages after 2nd consequtive hash usage 81.616 kb approximately
"observation:
- memory is released then reused
- less max memory consumed"
1.3 max memory usages after 3rd consequtive hash usage 80.000 kb approximately
"observation:
- memory is released then reused
- less max memory consumed"
1.4 Running the dictionary procedure after any of the hash runs will start from the already allocated memory
In this case from 80000 kb to 147000 kb
Close excel, free up memory and restart excel
2.1 Excel starting memory: 25.324 kb approximately
Max memory usage after dict (500.000 records) 90.000 kb approximately
Memory released: 91,9%
2.2 Excel starting memory 2nd consequtive dict run: 27.552 kb approximately
Max memory usage after dict (500.000 records) 90.000 kb approximately
Memory released: 99,4%
2.3 Excel starting memory 3rd consequtive dict run: 27.712 kb approximately
Max memory usage after dict (500.000 records) 90.000 kb approximately
Memory released:Hi Cor,
Thank you for going through my post and took the time to reply :) Most apreciated. The issue I am facing is that the memory is not reallocated when using mixed object types and is not behaving the same. I not understand that .net versus the older methods
use memory allocation differently and perhaps using the .net dictionary object (in stead of the scripting.dictionary) may lead to similar behaviour. {Curious to find that out -> put to the to do list of interesting thingies to explore}
I agree that allocated memory is not a bad thing as the blocks are already assigned to the program and therefore should be reallocated with more performance. However the dictionary object versus hashtable perform almost identical (and sometimes even favor
the dictionary object)
The hashtable is clearly the winner when dealing with small sets of data.
The issue arises when I am using the hash table in conjunction with another type, for example a dictionary, I see that the dictionary object's memory is stacked on top of the claimed memory space of the hashtable. It appears that .net memory allocation and
reuse is for .net references only. :) (Or so it seems)
In another example I got with the similar setup, I see that the total used memory is never released or reclaimed and leakage of around 20% allocated memory remains to eventually crash the system with the out of memory message. (This is when another class
calls the parent class that instantiates the child class but thats not the point of the question at hand)
This leakage drove me to investigate and create the example of this post in the first place. For the solution with the class -> parent class -> child class memory leak I switched all to dictionaries and no leakage occurs anymore but nevertheless thought
it may be good to share / ask if anyone else knows more :D (Never to old to learn something new) -
Strange repaint behaviour with JList & Keyboard actions
Hi everyone,
This is my first post to the forum. You guys have been a great help in the past and I hope to contribute more in the future.
Anyways, I've encountered some strange repainting behaviour with a JDialog that uses a JList and a JButton. The dialog is fairly straight-forward and basically this is how it works (like an open file dialog - yes I'm implementing my own filechooser of sorts):
* JList lists a number of simple items that the user can select from.
* Once a selection is made, an Open button (JButton) is enabled.
* <ENTER> key is registered (using registerKeyboardAction()) with a JPanel which is used as the main content pane in the dialog.
* The user can either click on the Open Button or hit the <ENTER> key which then closes the dialog and runs whatever logic that needs to.
Now, the repaint problem comes in when:
1. User selects an item.
2. User hits the <ENTER> button
3. Dialog closes
4. User brings the dialog back up. This entails reloading the list by removing all elements from the list and adding new ones back in.
5. Now... if the user uses the mouse to select an item lower in the list than what was done in step #1, the selection is made, but the JList doesn't repaint to show that the new selection was made.
I didn't include a code sample because the dialog setup is totally straight-forward and I'm not doing anything trick (I've been doing this kind of thing for years now).
If I remove the key registration for the <ENTER> key from the dialog, this problem NEVER happens. Has anyone seen anything like this? It's a minor problem since my workaround is to use a ListSelectionListener which manually calls repaint() on the JList inside the valueChanged() method.
Just curious,
HuyOh, my bad. I'm actually using a JToggleButton and not a JButton, so the getRootPane().setDefaultButton() doesn't apply because it only takes JButton as an input param. I wonder why it wasn't implemented to take AbstractButton. hmmm.
-
Strange JTable behaviour - everything is highlighted
Hello all,
im experiencing some strange JTable behaviour, and im not so sure why. When i run my program, the JTable appears, but all the cells are highlighted in advance. Also, i can now only select one cell at a time. I have set myTable.setSelectionModeListSelectionModel.SINGLE_INTERVAL_SELECTION); myTable.setCellSelectionEnabled(true);and my renderer code is below. I call the renderer by using the setDefaultRenderer method with(Object.class,myRenderer).
I have also changed isCellEditable to return true. If i dont use Object.class, and try to use my own custom class, the JTable is not all highlighted, but it doesnt seem to use myRenderer, and when i click on the header of Column A, all cells from column B and beyond become highlight, which is not normal behaviour. I thought the colum you selected should be highlighted.
Sorry for the long post, i hope the above makes sense...this is really quite bizzare, and im not so sure why this is happening. Thanks for any advice you can give, regards, Rupz
import javax.swing.*;
import javax.swing.table.DefaultTableCellRenderer;
import javax.swing.border.*;
import java.awt.Component;
import java.awt.Color;
import java.awt.Rectangle;
import java.util.*;
import java.awt.*;
public class MyTableCellRenderer extends DefaultTableCellRenderer{
private Font cellFont;
private LineBorder selectBorder;
private EmptyBorder emptyBorder;
public MyTableCellRenderer() {
super();
setOpaque(true);
emptyBorder = new EmptyBorder(1, 2, 1, 2);
cellFont = new Font("Times", Font.PLAIN, 10);
setFont(cellFont);
selectBorder = new LineBorder(Color.red);
private boolean isHeaderCell(int row, int column){return column == 0;}
public Component getTableCellRendererComponent (JTable myTable, Object value, boolean isSelected, boolean hasFocus, int row, int column){
//super.getTableCellRendererComponent(myTable, value, isSelected, hasFocus,row, column);
if (isSelected){
super.setForeground(myTable.getSelectionForeground());
super.setBackground(myTable.getSelectionBackground());
setBorder(selectBorder);
else{
super.setForeground(myTable.getSelectionForeground());
super.setBackground(myTable.getSelectionBackground());
setBorder(emptyBorder);
if (hasFocus) {
setBorder(selectBorder);
if (myTable.isCellEditable(row,column)) {
super.setForeground(UIManager.getColor("Table.focusCellForeground"));
super.setBackground(UIManager.getColor("Table.focusCellBackground"));
else {setBorder(noFocusBorder);}
setValue(value, isSelected, hasFocus, row, column);
// Color bDis = getBackground();
// boolean colourEquals = (bDis != null) && (bDis.equals(myTable.getBackground()) ) & myTable.isOpaque();
// setOpaque (!colourEquals);
return this;
public void setValue (Object value, boolean hasFocus, boolean isSelected, int row, int column){
if (value instanceof myCell){
myCell foo = (myCell)value;
Object data = foo.getValue(row,column);
if (isHeaderCell(row, column)) {
//label cells are center aligned
setHorizontalAlignment(JTextField.CENTER);
}else {
if (data instanceof Number) {
//numbers are right justified
setHorizontalAlignment(JTextField.RIGHT);
}else {
//everything else is left justified
setHorizontalAlignment(JTextField.LEFT);
//value to display in table
setText((data == null) ? "" : data.toString());
else {
//not cell object so render with toString of that object
setText((value == null) ? "" : value.toString());Hi VV!
thanks for the reply - now the table isnt all highlight when loaded, but as for cell celection..thats a different matter. I did have myTable.setCellSelectionEnabled(true); but no, the cell behaviour is really, eally weird, quite hard to explain, but here goes.
If i try to select cell D1 and D2 - D1 is selected, D2, E2,F2 and so on become selected. If i try to add D3 to the mix, the entire row 3 is selected, and as soon as i let go of the mouse button, the entire table except row 1 gets selected. really really weird. Below is my tableModel and what i do to the table. Thanks for your help,
regards
Rupz
myTable.setModel(new myTableModel(this,40,40));
// Create a row-header to display row numbers.
// This row-header is made of labels whose Borders,
// Foregrounds, Backgrounds, and Fonts must be
// the one used for the table column headers.
// Also ensure that the row-header labels and the table
// rows have the same height.
numRows = myTable.getColumnCount();
numCols = myTable.getRowCount();
TableColumn aColumn = myTable.getColumnModel().getColumn(0);
TableCellRenderer aRenderer = myTable.getTableHeader().getDefaultRenderer();
Component aComponent = aRenderer.getTableCellRendererComponent(myTable, aColumn.getHeaderValue(), false, false, -1, 0);
Font aFont = aComponent.getFont();
Color aBackground = aComponent.getBackground();
Color aForeground = aComponent.getForeground();
Border border = (Border)UIManager.getDefaults().get("TableHeader.cellBorder");
FontMetrics metrics = getFontMetrics(cellFont);
* Creating a panel to be used as the row header.
* Since I'm not using any LayoutManager,
* a call to setPreferredSize().
JPanel pnl = new JPanel((LayoutManager)null);
Dimension dim = new Dimension( 40, rowHeight*numRows);
pnl.setPreferredSize(dim);
// Adding the row header labels
dim.height = rowHeight;
for (int ii=0; ii<numRows; ii++) {
JLabel lbl = new JLabel(Integer.toString(ii+1), SwingConstants.CENTER);
lbl.setFont(aFont);
lbl.setBackground(aBackground);
lbl.setForeground(aForeground);
lbl.setBorder(border);
lbl.setBounds(0, ii*dim.height, dim.width, dim.height);
pnl.add(lbl);
JViewport vp = new JViewport();
dim.height = rowHeight*numRows;
vp.setViewSize(dim);
vp.setView(pnl);
// Set resize policy and make sure
// the table's size is tailored
// as soon as it gets drawn.
myTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
Dimension dimScpViewport = myTable.getPreferredScrollableViewportSize();
if (numRows>30) dimScpViewport.height = 30*rowHeight;
else dimScpViewport.height = numRows*rowHeight;
if (numCols>15)
dimScpViewport.width = 15*myTable.getColumnModel().getTotalColumnWidth()/numCols;
else
dimScpViewport.width = myTable.getColumnModel().getTotalColumnWidth();
myTable.setPreferredScrollableViewportSize(dimScpViewport);
myTable.repaint();
And the table model
public class myTableModel extends DefaultTableModel {
private MySpread mySpreadsheet;
public myTableModel (MySpread aSpreadsheet){
super();
mySpreadsheet = aSpreadsheet;
public myTableModel (MySpread aSpreadsheet, int rows,int cols){
super(rows,cols);
// for(int x = 0; x < rows; x++) {
// myCell temp = new myCell(new Integer(x+1));
// super.setValueAt(temp, x, 0);
for(int x =0 ; x < rows; x++)
for (int y = 0; y < cols; y++)
// we initialize it here
super.setValueAt(new myCell(rows,cols,("")),x,y);
mySpreadsheet = aSpreadsheet;
public boolean isCellEditable(int row, int column) {return true;}
-
Hi All,
I'm having problems with a portal since I added an applet to one of the portlets using an HTML <OBJECT> tag. The applet requires a java console to load up and once this is complete, for some reason the default portlet of the portal is refreshed (More precisely the begin action is fired).
I'm assuming that this is related to the java console because repeating the action above once the console has loaded does not cause the default portlet to be refreshed again a second time.
Has anyone experienced similar behaviour?
If it helps, the code in the jsp is:
<netui-data:repeater dataSource="{pageFlow.pieChart}">
<netui-data:repeaterHeader>
<OBJECT classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
height="200" width="650" hspace="10"
standby="Loading Requested Chart........">
<PARAM name="code" value="X_PieChart.class">
<PARAM name="codebase" value="/mpsportal/javaScript/">
<PARAM name="image" value="">
<PARAM name="forecolor" value="555566">
<PARAM name="activecolor" value="cc0000">
<PARAM name="backcolor" value="ffffbe">
<PARAM name="activecolor_shadow" value="ff0000">
<PARAM name="distance" value="8">
</netui-data:repeaterHeader>
<netui-data:repeaterItem>
<PARAM NAME='p<netui:content value="{container.index}"/>' value='<netui:content value="{container.item.name}"/>#<netui:content value="{container.item.value}"/>#0000AA#0000FF#<netui:content value="{container.item.name}"/> - <netui:content value="{container.item.value}"/>##'>
</netui-data:repeaterItem>
<netui-data:repeaterFooter>
<PARAM name="showratios" value="1">
<PARAM name="deep" value="8">
<PARAM name="font" value="verdana#plain#12">
<PARAM name="title" value="">
<PARAM name="titlealign" value="2">
</OBJECT>
</netui-data:repeaterFooter>
</netui-data:repeater>Hi all,
I am closing this thread as i came to know that i cannot open two threads parallely, about an issue in different forums .
If u have more suggetions reg this issue, please post them in the following thread :
Strange Portal Behaviour in Internet Explorer 8
Regards,
Anupama -
STRANGE GRAPHICS BEHAVIOUR !!!!
I've posted this in another forum but didn't get any good help...
So I hope U guys could help me!
I made a bit of complex GUI wih a lot of different layoutmanagers and components.
The problem is that when I open a frame/dialog/optionpane above the GUI it leaves "footprints" on the GUI. The "footprints" is vertical stripes from where the frame/dialog/optionpane where.
When a minimize my GUI and maximize it again the stripes are gone. It seems like the GUI needs to be updated/repainted or something more often (???)
I'm thinking about writing a class using a thread to update/repaint the GUI each 10 milliseconds or something. What do you guys think?
If you post me you're email-address I could send you a pic of the strange GUI behaviour.
Thanks in advance!!!
/AndrewHi,
try this
everytime ur application regains focus call
the updateUI() method.
for this ur application has implement FocusListener interface and write this code in the focusGained method
this should work
hope this helps
Regards,
Partha -
Hello,
I am faced with a strange webcache behaviour on my 9.0.4 portal. On conducting load tests on the vanilla portal install (on RedHat Linux 3.0 release), I find that the response is very smooth for sometime, with the the requests per second at a constant 800 req/sec for a certain user load, but after some time (like about 50 minutes), the throughput dramatically falls to about 40-50 rps. At this time, when I try to access the webpage, the response is very slow.
I am trying to access some simple html pages and they are all being served straight out of the cache. Has anyone faced a similar situation?
I tried accessing the Apache HTTP server directly and this problem disappears which leads me to conclude that the problem is probably with the web-cache. When I restart the webcache alone at this point of time, my throughput goes up back to normal, only to fail after a similar duration again.
Any inputs on this would be very helpful.
Thanks
JitendraThere are lots of resources available, both in terms of memory and CPU. The machine is cerianly not taxed for resources. I will have to check if it is a machine specific issue.
-
After I installed Snow Leopard, Safari renders specific pages and part of pages - strange.
http://yfrog.com/53screenshot20090929at173p
I noticed that behaviour whenever I open files like css, txt, js or every content that is not HTML page. In this example picture the strange text is wrapped with code tag. Funny thing is that if I copy/paste that strange text into TextEdit as PlainText - it will look OK!
I tried running Safari in 32 bit mode and even using Rosetta. In some cases there is no strange text, actually there is no text at all!
FireFox, for example, has no problem with this, as I tested.
What could be a problem here and how should I fix this?sceleski -
Check out this thread.
It's your Courier font, I believe.
http://discussions.apple.com/message.jspa?messageID=10309531#10309531 -
Very strange text on screen - Server 10.2.8
One place I work has a Mac network based around a G4 1.25 Ghz server running 10.2.8 Server and some Mk II iMacs running normal 10.2.8. Yesterday when I came in the server was showing a black screen with the following text scrolling down the screen in great lines:
diskOs9; Ox5 (UNDEFINED) <- written down in haste, I think I got the O as a letter not a number 0
... touching mouse or keyboard added further strange text and then it would return to the above.
Totday it all seems happy. But somehow I doubt if this is healthy. Any advice greatly appreciated. I'm trying to persuade the outgoing CEO not to set in train the acquisition of PCs, if only because I genuinely think it would end up costing more in the long run, and the place is hard up already!
I'm also wondering if the batteries on these machines are getting old - the network dates from 2003. Some of the last saved dates on the server are definitely totally wrong. Moreover there are strange things happening too; last week my files were dated things like 1911, 1942 etc etc, this week they are perfectly OK.
Getting worried![I got a black screen telling me I had to reboot in many languages, what was it?|http://www.dslreports.com/faq/4970] Also has detailed description of what happens during a KP.
[Apple docs: What's a kernel panic? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=106227]
[Topic : kmosx: Kernel Panics? Don't panic too !|http://discussions.apple.com/thread.jspa?threadID=121923]
[X-Lab: Resolving Kernel Panics|http://www.thexlab.com/faqs/kernelpanics.html]
[Tutorial: Avoiding and eliminating Kernel panics|http://www.macfixit.com/article.php?story=20060911080447777]
[Tutorial: An introduction to reading Mac OS X crash reports|http://www.macfixit.com/article.php?story=20060309075929717]
[12-Step Program to Isolate Freezes and/or Kernel Panics|http://macosg.com/group/viewtopic.php?t=800]
[Texas Mac Man's post on kernel panics|http://discussions.apple.com/thread.jspa?threadID=1723768&tstart=0] -
My iphone does not recognize saved contact number while having incoming calls due to country and area code as auto prefix. How do i fix the problem. How do i ensure that the phone recognize calls with and without the country and area code. Please text to help.
1) Open the Phone and dial *228. This is a Verizon over-the-air programming number.
2) When the system answer press 1 for "Program or activate your phone"
3) Wait for the call to disconnect. You should get a prompt stating something like, "Settings updated."
4) Open the Task Manager and kill the Phone, Message, and Contacts Applications
5) Wait a few minutes (I waited 3 just to be extra safe)
6) Open the Message App to verify the fix -
updated "successfully" to iOS7 on my 4S but now it takes FOREVER to recognize each keystroke - even to type in passcode. also takes forever to type a single key in text. HELP.
Adjusting the date or time didn't do anything for me either. I'm guessing my two options are to either do the full restore from scratch and not apply any backup ... Or possibly wait for an iOS update that might resolve this issue.
I'm not that much of an avid twitter user that I need it implemented natively in all my devices - so for now I'll probably value all my game save data, internal settings in apps e.t.c. over that functionality (or over the amount of work it would be to get me back to where I am now after a full wipe). I'll see what happens after the next iOS delta update. I'll reevaluate the full wipe after that if the issue hasn't been resolved
Maybe you are looking for
-
Dear All, We are using 2007 B - PL 7 We have created tax code as BED + VAT. But it is not showing in list of sales codes form while creating A/R Invoice. But it is available in Tax Code setup. Pl. any body can help in creating setup with Central exc
-
Creating Entity Object from Service Interface - JDeveloper version 11.1.1.3
In our project, we don't intend to have any JDBC connection to a database and want to create all my entity objects using SDO web services deployed in a remote server. I could create an entity object based on a SDO web service deployed in the standalo
-
Price of Upgrade to Photoshop Elements 13 and Premier Elements from both in version 10
Since the Adobe site is almost impossible to use in resolving problems, and any reference to Contact Us means Forums not Adobe themselves (fancy a Customer wanting to Contact the Company themselves - the cheek of it!) could anyone please advise what
-
System Error: Gants Management Update (Rsponsored_Prog.LGMACU13)
We are receiving this message when trying to post journal entry to balance sheet accounts. We have defined our grant funds to require a grant reference and have defined a sponsor class "Balance Sheet" to include b/s GL accounts. balance sheet account
-
Hi, I am new to Canon and this is my first post. I just got the T3i and believe it is not possible to do FEB with the built in flash. Am I correct on that? The direction to do that is with an external speedlite flash. Which Speedlite model does F