Strange text inserted in iPad email message

Today I started to reply to an email on my ipad....without my doing anything a strange sentence was inserted in my reply....it was a garbled sentence that included profanities.  Has anyone heard of this?  Our email was hacked recently and I used ESET antivirus software to scan our iMacs and external hard drives.  The scans found and quarantined a variant of WMA Trojan downloader on one iMac and its external hard drive.   Any advice on what I should do next? 

Not sure what may be causing the strange text. But there have been no viruses reported that affect an iOS device.

Similar Messages

  • IPAD email message does not show in message  part of email will only show when you hit the reply button, portion of message shows in thread only

    I can not view email message in the message frame, this is new, email always worked until yesterday . A portion of the message shows in thread column, but blank space shows in email column. How do I remedy this? I can only read my email when I go to the forward/reply button.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Using Rich Text Formatting Tools for Email Message Text Box in  Webdynpro.

    Hi All,
    I would like to know whether WebDynpro provides a feature of including the Rich Text Formatting Tools (like Font, FontSize, Spell check .....) inside a Text Box.
    I need to allow the user to format/indent text inside the Email message box, before sending the Email.
    Is ABAP/Java Webdynpro providing us the above feature currently?
    Thanks for your time.
    Regards,
    Madhavi.

    Hi Armin,
    Thanks for your quick reply. Are there any release dates for when NWDS 7.1 be available?
    Thanks,
    Madhavi

  • Can I copy an iPad email message to a folder?

    In "Mail" on my home computer, I can copy messages to a local (on this MAC) folder, which leaves them intact in the Inbox on the IMAP server, so that I can "see them" in the inbox when I am at my office computer. The folders on my home and office computers are the type that are on the computer irself and not the IMAP server for security reasons, to have extra "back-up" copies if needed, and because I save different types of messages in the 2 locations. In iPad "Mail" it appears that the only option is to "move" a message to a folder. This moves it out of the inbox, so it will not appear in the inbox when I open "Mail" on my home or office computer. The iPad folders are ones that I created on the IMAP server using my home computer and then synced to my iPad, (which also as far as I could tell is the only way to create folders on iPad "Mail" until OS5 comes along). These folders would be visible to me at my office, but I would have to remember to look in the folder to copy the message to a "local folder", instead of just being able to copy it from my inbox. One workaround is to never store an email in an iPad folder until I have copied it on the other computers. But, since I often get to the email first on my iPad, especially while traveling, I would prefer to just copy messages to the IMAP folders if it is possible. Is there a "copy message to" option for iPad "Mail"?

    I do the same thing - leave the email in the inbox and mark it as unread. There is no "copy to" option in the iPad Mail App. As you stated, you can move the messages to other folders that you have in your account. There may be third party mail apps that let you do what you want to do but not in the Mail App.
    This is from a very quick Google search simply to let you know there are alternatives to the mail app.
    http://www.ilovefreesoftware.com/17/ipad-2/free-ipad-e-mail-apps.html

  • My the contents ipad email messages are being overwritten by subsequent email messages

    I've got a popd email account which I access through a 4th gen IPAD, which was running 8.11.  The contents of two  messages (which had a lot of jpgs attached) was overwritten by a different email which arrived later in the day.  So the subject line is from the original email but the content is from an email received a couple of hours later.  The newer email is also still there with it's own content and subject.

    Go to Settings>Messages>Send and Receive and your number should be there. Remove the checkmark for the Apple ID email address.

  • Inserting PDFs onto email message

    Hi all...hoping i can get some insight into this as i run a business that requires e-media, letter heads, logos blah.........
    I operate on the leopard platform and use office mac 2008 and can't get pdf images to sit on my entourage wether sending or receiving emails.
    This was never a problem with the previous operating platform when using microsoft office 2004.
    How can I insert a PDF onto my emails & receive them from senders
    angelonsax

    In the message window, click the little disclosure triangle
    next to the word "Attachments". Then click the "Add" button.
    When you receive an attachment, you can just drag it to your
    desktop.
    If that doesn't work, try deinterlacing.

  • Email message text size

    How do I increase the text size in my email messages?  Apple traded me a new 5C iPhone for a 5S that had died. The new text is tiny.

    How do I restore margins?  I now have a small body go text vertically down the page, with over half the page devoted to a margin.

  • Is there any way to disable the use of the "Delete" key to delete an email message?

    It's very frustrating when I hit the delete key and iCloud automatically erases the selected email message.  I receive some HTML formatted emails that include a text box that I can utilize to directly reply to something.  If I don't make any mistakes at all, I can utilize this box and post a reply.  But if I mess up and need to delete text, instead of deleting text iCloud deletes the email message.  Is there any way to disable this?
    Thanks for your help.

    I don't believe it's possible to disable the delete key, but could be wrong. However, if you delete an email in error, you can restore it by pressing cmd + Z to undo the deletion.

  • TS3899 I recently discovered that I can no longer access websites pointed to within the content of an email message on my iPad Air by clicking on the highlighted HTML text or symbols. What should I do to correct this issue?

    I recently discovered that I can no longer access websites pointed to within the content of an email message on my iPad Air by clicking on the highlighted HTML text or symbols. What have I done to create, and what should I now do to correct, this issue?

    Or you could include a width to your body style:
    body {
    background-image: url(Logo/sky1.jpg);
    background-position: center center;
    background-attachment: fixed;
    width: 75%;}
    It might work or not depending on your other color scheme.

  • TS2755 Does anyone know why: when using Messages on my iPad, a cannot send a message with only text on it? Strange though, I can send a message with text AND a photo??

    Does anyone know why, when using Messages on my iPad, a cannot send a message with only text on it? Strange though, I can send a message with text AND a photo??

    Hi Cass,
    If you are having issues with Messages on your iPad, you may find the following article helpful:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Regards,
    - Brenden

  • Since 10.5.6 upgrade, email messages are garbled text

    Hi,
    This problem seems to have started with the latest upgrade. My email messages are coming in with garbled text. This happens in my Yahoo account where I will go to the mail website and the text there will be fine. It's only in the mail program.
    Thanks in advance,
    Pete.

    Hi,
    I have the same issue.
    Although the mails seems to have been downloaded correctly parts of the parts of the message mime information is displayed as part of the mail body.
    The only thing that helps is to rebuild the index of the specific mailbox (inbox in my case).
    BTW: Mail of iPhone OS does NOT have this problem. Generally it handles mails MUCH better than the real OS X. Strange, isn't it.

  • When I send a text from my iPad, it shows that it comes from my email address.  If I then text that same someone from my iPhone it still shows as if its coming from my iPad.  How do I stop this?

    When I send a text from my iPad, it shows that it comes from my email address.  If I then text that same someone from my iPhone it still shows as if its coming from my iPad.  How do I stop this?

    On your iPhone, go to Settings -> Messages -> Receive At -> Caller ID and make sure the phone number is selected - this will cause new messages sent from your iPhone to appear to come from your iPhone phone number.
    (I actually prefer to have my email selected, so that when I message someone from my iPhone and they reply, it goes to both my iPhone and iPad)
    Also, when you send a message from your iPhone, make sure you're not replying within an existing conversation (that was created on your iPad and linked to your email). Just start a new conversation (even if it's to the same person) by going to the Messages app, going back to "Messages" (top left corner) if you're already looking at a conversation, and then clicking the Compose icon in the top right.

  • Why can't I get text on my iPad? Roommate has iPhone and iPad like myself gets text both places. The only difference seems to be her phone number is listed before her email address. Can't get it to add my number.

    Why can't I get text on my iPad?  My roommate has a iphone and iPad like myself and she gets text. Only difference is her cell number is listed before her email address. My cell number is no there and won't let me add it.

    I assume that you mean that you do have an iPhone because messages will not work with any other type of cell phone. You should be able to add your phone number in Settings>Messages>Send & Receive at>You can be reached by iMessages at, if your phone number is lited in there, select it and then uncheck your email address and then the iPad will be using the phone number just like the iPhone.
    If you phone number is not listed in there, you probably have to sign out/turn off Messages on the phone and the iPad and then start over again on the phone - and then your phone number should be accessible to use on the iPad.
    Read this support article and pay attention to the information at the very end.
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538

  • Email link with no additional text insertion

    Hello All.
    Thanks for your participation here.
    Kinda newbie here so forgive me if my terminalogy is off.
    Two part question:
    1) I'm creating popup windows. I get that there's a
    difference between inserting a hyperlink to open a popup window as
    opposed to adding a behavior to do the same thing. Adding a
    behavior doen't screw up my layout the way inserting a hyperlnk
    does so I much prefer that. (Why does any action screw up my
    layout?)
    2) Similarly, when inserting an email link DW insists an
    adding text into my page and forces everything to move around.
    (Things moving around without my consent is not acceptable to me.)
    Is there a "behavior" that will trigger a viewer's email program to
    send me an email to my designated address instead of the messy
    email link? Or can I turn off the text insert that happens when I
    enter my email address in the insert email link mode?
    Thanks All.

    > 1) I'm creating popup windows. I get that there's a
    difference between
    > inserting a hyperlink to open a popup window as opposed
    to adding a
    > behavior to
    > do the same thing. Adding a behavior doen't screw up my
    layout the way
    > inserting a hyperlnk does so I much prefer that. (Why
    does any action
    > screw up
    > my layout?)
    There is no real difference between those two things.
    One would be to add a hyperlink to the triiger pointing to a
    new page with a
    target of "_blank". The other would be to add a null link to
    the trigger
    which calls a javascript function that opens the new window.
    They are
    fundamentally the same - both require adding a hyperlink.
    Neither should 'screw up [your] layout'. We'd have to see the
    page and its
    code, though, to know what you are doing wrong.
    > 2) Similarly, when inserting an email link DW insists an
    adding text into
    > my
    > page and forces everything to move around.
    Give us an example, please.
    > (Things moving around without my consent is not
    acceptable to me.)
    Get used to it until you have learned some HTML and CSS. It
    will be a way
    of life as long as you use DW exclusively in Design view.
    > Is there a "behavior" that will trigger a
    > viewer's email program to send me an email to my
    designated address
    > instead of
    > the messy email link?
    No. But that "messy email link" is not the optimal way to do
    it, either.
    The best way is to link to a feedback form, which they fill
    out, and which
    is then sent to you by a form processing script.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "samsmall" <[email protected]> wrote in
    message
    news:[email protected]...
    > Hello All.
    > Thanks for your participation here.
    > Kinda newbie here so forgive me if my terminalogy is
    off.
    > Two part question:
    > 1) I'm creating popup windows. I get that there's a
    difference between
    > inserting a hyperlink to open a popup window as opposed
    to adding a
    > behavior to
    > do the same thing. Adding a behavior doen't screw up my
    layout the way
    > inserting a hyperlnk does so I much prefer that. (Why
    does any action
    > screw up
    > my layout?)
    > 2) Similarly, when inserting an email link DW insists an
    adding text into
    > my
    > page and forces everything to move around. (Things
    moving around without
    > my
    > consent is not acceptable to me.) Is there a "behavior"
    that will trigger
    > a
    > viewer's email program to send me an email to my
    designated address
    > instead of
    > the messy email link? Or can I turn off the text insert
    that happens when
    > I
    > enter my email address in the insert email link mode?
    >
    > Thanks All.
    >
    >

  • Ipad sending messages thru email

    suddenly my iPad is only sending messages thru my email and not snyc thru my phone number so essentially I don't get text showing on iPad when I go to settings it only shows my email address and no ability to ad a phone number. I'm not sure what changed it. I've reset network and all other settings and turned on and off the iMessage slider

    Or maybe you have found any other way? You can check here:
    Password protect PDF file:
    Re: Password protected PDF file 
    pdf with password encryption
    Regards Otto

Maybe you are looking for

  • JTable DND requires two clicks (fixed but broken in 1.6)

    I'm using a JTable as a source of a drag and drop operation. I can easily get it to work, however, when I want to start a drag from an unselected row I have to first click on the row to select it and then mouse-down on the row and then I can drag it.

  • Ipad 3 Wifi connectivity issues on IOS8

    Hi everyone, just wondering if anyone else has experienced wifi issues with ipad 3 (the retina late 2012 version). even right next to my router i keep losing connection and every time i turn on and off from sleep i need to disconnect and connect wifi

  • Removing date at bottom when exporting to PDF

    Hi, When I export a keynote ('09) file to PDF, it includes a date at the bottom of the exported PDF. Does anyone know how to prevent this from happening? Thanks for your help, Laura

  • Best way to move data between instances

    I currently have a procedure that updates our data tables between instances... I would normally do a clone but since developers use this instance to do their work in, it's not a viable option. The past few times, I've scheduled the procedure to run v

  • IT0024 Qualification Data Conversion

    We are running into some conversion issues related to IT0024 Qualifications.  We have tried to use the HRDT - HR Data Toolbox along with SECATT, we are unable to convert our data using either tool.  The issues(s) seem to revolve around the grid withi